blob: 0a552061ff1ca0f112df06dff0e4f171af5ac03e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
|
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* linux/mdio.h: definitions for MDIO (clause 45) transceivers
* Copyright 2006-2009 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
#ifndef _UAPI__LINUX_MDIO_H__
#define _UAPI__LINUX_MDIO_H__
#include <linux/types.h>
#include <linux/mii.h>
/* MDIO Manageable Devices (MMDs). */
#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
* Physical Medium Dependent */
#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
#define MDIO_MMD_TC 6 /* Transmission Convergence */
#define MDIO_MMD_AN 7 /* Auto-Negotiation */
#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
/* Generic MDIO registers. */
#define MDIO_CTRL1 MII_BMCR
#define MDIO_STAT1 MII_BMSR
#define MDIO_DEVID1 MII_PHYSID1
#define MDIO_DEVID2 MII_PHYSID2
#define MDIO_SPEED 4 /* Speed ability */
#define MDIO_DEVS1 5 /* Devices in package */
#define MDIO_DEVS2 6
#define MDIO_CTRL2 7 /* 10G control 2 */
#define MDIO_STAT2 8 /* 10G status 2 */
#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
#define MDIO_PKGID1 14 /* Package identifier */
#define MDIO_PKGID2 15
#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
#define MDIO_PMA_NG_EXTABLE 21 /* 2.5G/5G PMA/PMD extended ability */
#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
/* Media-dependent registers. */
#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
* Lanes B-D are numbered 134-136. */
#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
/* Control register 1. */
/* Enable extended speed selection */
#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
/* All speed selection bits */
#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
#define MDIO_CTRL1_LPOWER BMCR_PDOWN
#define MDIO_CTRL1_RESET BMCR_RESET
#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
/* 10 Gb/s */
#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
/* 10PASS-TS/2BASE-TL */
#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
/* 2.5 Gb/s */
#define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18)
/* 5 Gb/s */
#define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c)
/* Status register 1. */
#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
#define MDIO_STAT1_FAULT 0x0080 /* Fault */
#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
/* Speed register. */
#define MDIO_SPEED_10G 0x0001 /* 10G capable */
#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
/* Device present registers. */
#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
#define MDIO_DEVS_C22PRESENT MDIO_DEVS_PRESENT(0)
#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
/* Control register 2. */
#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */
#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */
#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
/* Status register 2. */
#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
/* Transmit disable register. */
#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
/* Receive signal detect register. */
#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
/* Extended abilities register. */
#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */
/* PHY XGXS lane state register. */
#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
/* PMA 10GBASE-T pair swap & polarity */
#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
/* PMA 10GBASE-T TX power register. */
#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
/* PMA 10GBASE-T SNR registers. */
/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
#define MDIO_PMA_10GBT_SNR_MAX 127
/* PMA 10GBASE-R FEC ability register. */
#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
/* PCS 10GBASE-R/-T status register 1. */
#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
/* PCS 10GBASE-R/-T status register 2. */
#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
/* AN 10GBASE-T control register. */
#define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
/* AN 10GBASE-T status register. */
#define MDIO_AN_10GBT_STAT_LP2_5G 0x0020 /* LP is 2.5GBT capable */
#define MDIO_AN_10GBT_STAT_LP5G 0x0040 /* LP is 5GBT capable */
#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
/* EEE Supported/Advertisement/LP Advertisement registers.
*
* EEE capability Register (3.20), Advertisement (7.60) and
* Link partner ability (7.61) registers have and can use the same identical
* bit masks.
*/
#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
/* Note: the two defines above can be potentially used by the user-land
* and cannot remove them now.
* So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
* using the previous ones (that can be considered obsolete).
*/
#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */
#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */
#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
/* 2.5G/5G Extended abilities register. */
#define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */
#define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */
/* LASI RX_ALARM control/status registers. */
#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
/* LASI TX_ALARM control/status registers. */
#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
/* LASI control/status registers. */
#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
#define MDIO_PHY_ID_C45 0x8000
#define MDIO_PHY_ID_PRTAD 0x03e0
#define MDIO_PHY_ID_DEVAD 0x001f
#define MDIO_PHY_ID_C45_MASK \
(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
static inline __u16 mdio_phy_id_c45(int prtad, int devad)
{
return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
}
#endif /* _UAPI__LINUX_MDIO_H__ */
|
