1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
|
// SPDX-License-Identifier: ISC
/*
* Copyright (c) 2010 Broadcom Corporation
*/
#ifndef _SBCHIPC_H
#define _SBCHIPC_H
#include "defs.h" /* for PAD macro */
#define CHIPCREGOFFS(field) offsetof(struct chipcregs, field)
struct chipcregs {
u32 chipid; /* 0x0 */
u32 capabilities;
u32 corecontrol; /* corerev >= 1 */
u32 bist;
/* OTP */
u32 otpstatus; /* 0x10, corerev >= 10 */
u32 otpcontrol;
u32 otpprog;
u32 otplayout; /* corerev >= 23 */
/* Interrupt control */
u32 intstatus; /* 0x20 */
u32 intmask;
/* Chip specific regs */
u32 chipcontrol; /* 0x28, rev >= 11 */
u32 chipstatus; /* 0x2c, rev >= 11 */
/* Jtag Master */
u32 jtagcmd; /* 0x30, rev >= 10 */
u32 jtagir;
u32 jtagdr;
u32 jtagctrl;
/* serial flash interface registers */
u32 flashcontrol; /* 0x40 */
u32 flashaddress;
u32 flashdata;
u32 PAD[1];
/* Silicon backplane configuration broadcast control */
u32 broadcastaddress; /* 0x50 */
u32 broadcastdata;
/* gpio - cleared only by power-on-reset */
u32 gpiopullup; /* 0x58, corerev >= 20 */
u32 gpiopulldown; /* 0x5c, corerev >= 20 */
u32 gpioin; /* 0x60 */
u32 gpioout; /* 0x64 */
u32 gpioouten; /* 0x68 */
u32 gpiocontrol; /* 0x6C */
u32 gpiointpolarity; /* 0x70 */
u32 gpiointmask; /* 0x74 */
/* GPIO events corerev >= 11 */
u32 gpioevent;
u32 gpioeventintmask;
/* Watchdog timer */
u32 watchdog; /* 0x80 */
/* GPIO events corerev >= 11 */
u32 gpioeventintpolarity;
/* GPIO based LED powersave registers corerev >= 16 */
u32 gpiotimerval; /* 0x88 */
u32 gpiotimeroutmask;
/* clock control */
u32 clockcontrol_n; /* 0x90 */
u32 clockcontrol_sb; /* aka m0 */
u32 clockcontrol_pci; /* aka m1 */
u32 clockcontrol_m2; /* mii/uart/mipsref */
u32 clockcontrol_m3; /* cpu */
u32 clkdiv; /* corerev >= 3 */
u32 gpiodebugsel; /* corerev >= 28 */
u32 capabilities_ext; /* 0xac */
/* pll delay registers (corerev >= 4) */
u32 pll_on_delay; /* 0xb0 */
u32 fref_sel_delay;
u32 slow_clk_ctl; /* 5 < corerev < 10 */
u32 PAD;
/* Instaclock registers (corerev >= 10) */
u32 system_clk_ctl; /* 0xc0 */
u32 clkstatestretch;
u32 PAD[2];
/* Indirect backplane access (corerev >= 22) */
u32 bp_addrlow; /* 0xd0 */
u32 bp_addrhigh;
u32 bp_data;
u32 PAD;
u32 bp_indaccess;
u32 PAD[3];
/* More clock dividers (corerev >= 32) */
u32 clkdiv2;
u32 PAD[2];
/* In AI chips, pointer to erom */
u32 eromptr; /* 0xfc */
/* ExtBus control registers (corerev >= 3) */
u32 pcmcia_config; /* 0x100 */
u32 pcmcia_memwait;
u32 pcmcia_attrwait;
u32 pcmcia_iowait;
u32 ide_config;
u32 ide_memwait;
u32 ide_attrwait;
u32 ide_iowait;
u32 prog_config;
u32 prog_waitcount;
u32 flash_config;
u32 flash_waitcount;
u32 SECI_config; /* 0x130 SECI configuration */
u32 PAD[3];
/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
u32 eci_output; /* 0x140 */
u32 eci_control;
u32 eci_inputlo;
u32 eci_inputmi;
u32 eci_inputhi;
u32 eci_inputintpolaritylo;
u32 eci_inputintpolaritymi;
u32 eci_inputintpolarityhi;
u32 eci_intmasklo;
u32 eci_intmaskmi;
u32 eci_intmaskhi;
u32 eci_eventlo;
u32 eci_eventmi;
u32 eci_eventhi;
u32 eci_eventmasklo;
u32 eci_eventmaskmi;
u32 eci_eventmaskhi;
u32 PAD[3];
/* SROM interface (corerev >= 32) */
u32 sromcontrol; /* 0x190 */
u32 sromaddress;
u32 sromdata;
u32 PAD[17];
/* Clock control and hardware workarounds (corerev >= 20) */
u32 clk_ctl_st; /* 0x1e0 */
u32 hw_war;
u32 PAD[70];
/* UARTs */
u8 uart0data; /* 0x300 */
u8 uart0imr;
u8 uart0fcr;
u8 uart0lcr;
u8 uart0mcr;
u8 uart0lsr;
u8 uart0msr;
u8 uart0scratch;
u8 PAD[248]; /* corerev >= 1 */
u8 uart1data; /* 0x400 */
u8 uart1imr;
u8 uart1fcr;
u8 uart1lcr;
u8 uart1mcr;
u8 uart1lsr;
u8 uart1msr;
u8 uart1scratch;
u32 PAD[62];
/* save/restore, corerev >= 48 */
u32 sr_capability; /* 0x500 */
u32 sr_control0; /* 0x504 */
u32 sr_control1; /* 0x508 */
u32 gpio_control; /* 0x50C */
u32 PAD[60];
/* PMU registers (corerev >= 20) */
u32 pmucontrol; /* 0x600 */
u32 pmucapabilities;
u32 pmustatus;
u32 res_state;
u32 res_pending;
u32 pmutimer;
u32 min_res_mask;
u32 max_res_mask;
u32 res_table_sel;
u32 res_dep_mask;
u32 res_updn_timer;
u32 res_timer;
u32 clkstretch;
u32 pmuwatchdog;
u32 gpiosel; /* 0x638, rev >= 1 */
u32 gpioenable; /* 0x63c, rev >= 1 */
u32 res_req_timer_sel;
u32 res_req_timer;
u32 res_req_mask;
u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */
u32 chipcontrol_addr; /* 0x650 */
u32 chipcontrol_data; /* 0x654 */
u32 regcontrol_addr;
u32 regcontrol_data;
u32 pllcontrol_addr;
u32 pllcontrol_data;
u32 pmustrapopt; /* 0x668, corerev >= 28 */
u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */
u32 retention_ctl; /* 0x670, pmurev >= 15 */
u32 PAD[3];
u32 retention_grpidx; /* 0x680 */
u32 retention_grpctl; /* 0x684 */
u32 PAD[94];
u16 sromotp[768];
};
/* chipid */
#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
#define CID_REV_SHIFT 16 /* Chip Revision shift */
#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
#define CID_PKG_SHIFT 20 /* Package Option shift */
#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
#define CID_CC_SHIFT 24
#define CID_TYPE_MASK 0xf0000000 /* Chip Type */
#define CID_TYPE_SHIFT 28
/* capabilities */
#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */
#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
/* UARTs are driven by internal divided clock */
#define CC_CAP_UINTCLK 0x00000008
#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */
#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */
#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */
#define CC_CAP_PWR_CTL 0x00040000 /* Power control */
#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */
#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */
#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */
#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */
/* Nand flash present, rev >= 35 */
#define CC_CAP_NFLASH 0x80000000
#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */
/* GSIO (spi/i2c) present, rev >= 37 */
#define CC_CAP2_GSIO 0x00000002
/* sr_control0, rev >= 48 */
#define CC_SR_CTL0_ENABLE_MASK BIT(0)
#define CC_SR_CTL0_ENABLE_SHIFT 0
#define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT 1 /* sr_clk to sr_memory enable */
#define CC_SR_CTL0_RSRC_TRIGGER_SHIFT 2 /* Rising edge resource trigger 0 to
* sr_engine
*/
#define CC_SR_CTL0_MIN_DIV_SHIFT 6 /* Min division value for fast clk
* in sr_engine
*/
#define CC_SR_CTL0_EN_SBC_STBY_SHIFT 16
#define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT 18
#define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT 19
#define CC_SR_CTL0_ALLOW_PIC_SHIFT 20 /* Allow pic to separate power
* domains
*/
#define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT 25
#define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP 30
/* pmucapabilities */
#define PCAP_REV_MASK 0x000000ff
#define PCAP_RC_MASK 0x00001f00
#define PCAP_RC_SHIFT 8
#define PCAP_TC_MASK 0x0001e000
#define PCAP_TC_SHIFT 13
#define PCAP_PC_MASK 0x001e0000
#define PCAP_PC_SHIFT 17
#define PCAP_VC_MASK 0x01e00000
#define PCAP_VC_SHIFT 21
#define PCAP_CC_MASK 0x1e000000
#define PCAP_CC_SHIFT 25
#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */
#define PCAP5_PC_SHIFT 17
#define PCAP5_VC_MASK 0x07c00000
#define PCAP5_VC_SHIFT 22
#define PCAP5_CC_MASK 0xf8000000
#define PCAP5_CC_SHIFT 27
/* pmucapabilites_ext PMU rev >= 15 */
#define PCAPEXT_SR_SUPPORTED_MASK (1 << 1)
/* retention_ctl PMU rev >= 15 */
#define PMU_RCTL_MACPHY_DISABLE_MASK (1 << 26)
#define PMU_RCTL_LOGIC_DISABLE_MASK (1 << 27)
/*
* Maximum delay for the PMU state transition in us.
* This is an upper bound intended for spinwaits etc.
*/
#define PMU_MAX_TRANSITION_DLY 15000
#endif /* _SBCHIPC_H */
|
