1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
|
/*
* This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
* DWC Ether MAC version 4.xx has been used for developing this code.
*
* This contains the functions to handle the dma.
*
* Copyright (C) 2015 STMicroelectronics Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
#include <linux/io.h>
#include "dwmac4.h"
#include "dwmac4_dma.h"
static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
{
u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
int i;
pr_info("dwmac4: Master AXI performs %s burst length\n",
(value & DMA_SYS_BUS_FB) ? "fixed" : "any");
if (axi->axi_lpi_en)
value |= DMA_AXI_EN_LPI;
if (axi->axi_xit_frm)
value |= DMA_AXI_LPI_XIT_FRM;
value &= ~DMA_AXI_WR_OSR_LMT;
value |= (axi->axi_wr_osr_lmt & DMA_AXI_OSR_MAX) <<
DMA_AXI_WR_OSR_LMT_SHIFT;
value &= ~DMA_AXI_RD_OSR_LMT;
value |= (axi->axi_rd_osr_lmt & DMA_AXI_OSR_MAX) <<
DMA_AXI_RD_OSR_LMT_SHIFT;
/* Depending on the UNDEF bit the Master AXI will perform any burst
* length according to the BLEN programmed (by default all BLEN are
* set).
*/
for (i = 0; i < AXI_BLEN; i++) {
switch (axi->axi_blen[i]) {
case 256:
value |= DMA_AXI_BLEN256;
break;
case 128:
value |= DMA_AXI_BLEN128;
break;
case 64:
value |= DMA_AXI_BLEN64;
break;
case 32:
value |= DMA_AXI_BLEN32;
break;
case 16:
value |= DMA_AXI_BLEN16;
break;
case 8:
value |= DMA_AXI_BLEN8;
break;
case 4:
value |= DMA_AXI_BLEN4;
break;
}
}
writel(value, ioaddr + DMA_SYS_BUS_MODE);
}
static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_rx_phy, u32 chan)
{
u32 value;
u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
}
static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_tx_phy, u32 chan)
{
u32 value;
u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
/* Enable OSP to get best performance */
value |= DMA_CONTROL_OSP;
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
}
static void dwmac4_dma_init_channel(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, u32 chan)
{
u32 value;
/* common channel control register config */
value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
if (dma_cfg->pblx8)
value = value | DMA_BUS_MODE_PBL;
writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
/* Mask interrupts by writing to CSR7 */
writel(DMA_CHAN_INTR_DEFAULT_MASK,
ioaddr + DMA_CHAN_INTR_ENA(chan));
}
static void dwmac4_dma_init(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, int atds)
{
u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
/* Set the Fixed burst mode */
if (dma_cfg->fixed_burst)
value |= DMA_SYS_BUS_FB;
/* Mixed Burst has no effect when fb is set */
if (dma_cfg->mixed_burst)
value |= DMA_SYS_BUS_MB;
if (dma_cfg->aal)
value |= DMA_SYS_BUS_AAL;
writel(value, ioaddr + DMA_SYS_BUS_MODE);
}
static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
u32 *reg_space)
{
reg_space[DMA_CHAN_CONTROL(channel) / 4] =
readl(ioaddr + DMA_CHAN_CONTROL(channel));
reg_space[DMA_CHAN_TX_CONTROL(channel) / 4] =
readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
reg_space[DMA_CHAN_RX_CONTROL(channel) / 4] =
readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
reg_space[DMA_CHAN_TX_BASE_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_TX_BASE_ADDR(channel));
reg_space[DMA_CHAN_RX_BASE_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
reg_space[DMA_CHAN_TX_END_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_TX_END_ADDR(channel));
reg_space[DMA_CHAN_RX_END_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_RX_END_ADDR(channel));
reg_space[DMA_CHAN_TX_RING_LEN(channel) / 4] =
readl(ioaddr + DMA_CHAN_TX_RING_LEN(channel));
reg_space[DMA_CHAN_RX_RING_LEN(channel) / 4] =
readl(ioaddr + DMA_CHAN_RX_RING_LEN(channel));
reg_space[DMA_CHAN_INTR_ENA(channel) / 4] =
readl(ioaddr + DMA_CHAN_INTR_ENA(channel));
reg_space[DMA_CHAN_RX_WATCHDOG(channel) / 4] =
readl(ioaddr + DMA_CHAN_RX_WATCHDOG(channel));
reg_space[DMA_CHAN_SLOT_CTRL_STATUS(channel) / 4] =
readl(ioaddr + DMA_CHAN_SLOT_CTRL_STATUS(channel));
reg_space[DMA_CHAN_CUR_TX_DESC(channel) / 4] =
readl(ioaddr + DMA_CHAN_CUR_TX_DESC(channel));
reg_space[DMA_CHAN_CUR_RX_DESC(channel) / 4] =
readl(ioaddr + DMA_CHAN_CUR_RX_DESC(channel));
reg_space[DMA_CHAN_CUR_TX_BUF_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_CUR_TX_BUF_ADDR(channel));
reg_space[DMA_CHAN_CUR_RX_BUF_ADDR(channel) / 4] =
readl(ioaddr + DMA_CHAN_CUR_RX_BUF_ADDR(channel));
reg_space[DMA_CHAN_STATUS(channel) / 4] =
readl(ioaddr + DMA_CHAN_STATUS(channel));
}
static void dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
{
int i;
for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
_dwmac4_dump_dma_regs(ioaddr, i, reg_space);
}
static void dwmac4_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 number_chan)
{
u32 chan;
for (chan = 0; chan < number_chan; chan++)
writel(riwt, ioaddr + DMA_CHAN_RX_WATCHDOG(chan));
}
static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode,
u32 channel, int fifosz, u8 qmode)
{
unsigned int rqs = fifosz / 256 - 1;
u32 mtl_rx_op, mtl_rx_int;
mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
if (mode == SF_DMA_MODE) {
pr_debug("GMAC: enable RX store and forward mode\n");
mtl_rx_op |= MTL_OP_MODE_RSF;
} else {
pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
mtl_rx_op &= ~MTL_OP_MODE_RSF;
mtl_rx_op &= MTL_OP_MODE_RTC_MASK;
if (mode <= 32)
mtl_rx_op |= MTL_OP_MODE_RTC_32;
else if (mode <= 64)
mtl_rx_op |= MTL_OP_MODE_RTC_64;
else if (mode <= 96)
mtl_rx_op |= MTL_OP_MODE_RTC_96;
else
mtl_rx_op |= MTL_OP_MODE_RTC_128;
}
mtl_rx_op &= ~MTL_OP_MODE_RQS_MASK;
mtl_rx_op |= rqs << MTL_OP_MODE_RQS_SHIFT;
/* Enable flow control only if each channel gets 4 KiB or more FIFO and
* only if channel is not an AVB channel.
*/
if ((fifosz >= 4096) && (qmode != MTL_QUEUE_AVB)) {
unsigned int rfd, rfa;
mtl_rx_op |= MTL_OP_MODE_EHFC;
/* Set Threshold for Activating Flow Control to min 2 frames,
* i.e. 1500 * 2 = 3000 bytes.
*
* Set Threshold for Deactivating Flow Control to min 1 frame,
* i.e. 1500 bytes.
*/
switch (fifosz) {
case 4096:
/* This violates the above formula because of FIFO size
* limit therefore overflow may occur in spite of this.
*/
rfd = 0x03; /* Full-2.5K */
rfa = 0x01; /* Full-1.5K */
break;
case 8192:
rfd = 0x06; /* Full-4K */
rfa = 0x0a; /* Full-6K */
break;
case 16384:
rfd = 0x06; /* Full-4K */
rfa = 0x12; /* Full-10K */
break;
default:
rfd = 0x06; /* Full-4K */
rfa = 0x1e; /* Full-16K */
break;
}
mtl_rx_op &= ~MTL_OP_MODE_RFD_MASK;
mtl_rx_op |= rfd << MTL_OP_MODE_RFD_SHIFT;
mtl_rx_op &= ~MTL_OP_MODE_RFA_MASK;
mtl_rx_op |= rfa << MTL_OP_MODE_RFA_SHIFT;
}
writel(mtl_rx_op, ioaddr + MTL_CHAN_RX_OP_MODE(channel));
/* Enable MTL RX overflow */
mtl_rx_int = readl(ioaddr + MTL_CHAN_INT_CTRL(channel));
writel(mtl_rx_int | MTL_RX_OVERFLOW_INT_EN,
ioaddr + MTL_CHAN_INT_CTRL(channel));
}
static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode,
u32 channel, int fifosz, u8 qmode)
{
u32 mtl_tx_op = readl(ioaddr + MTL_CHAN_TX_OP_MODE(channel));
unsigned int tqs = fifosz / 256 - 1;
if (mode == SF_DMA_MODE) {
pr_debug("GMAC: enable TX store and forward mode\n");
/* Transmit COE type 2 cannot be done in cut-through mode. */
mtl_tx_op |= MTL_OP_MODE_TSF;
} else {
pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
mtl_tx_op &= ~MTL_OP_MODE_TSF;
mtl_tx_op &= MTL_OP_MODE_TTC_MASK;
/* Set the transmit threshold */
if (mode <= 32)
mtl_tx_op |= MTL_OP_MODE_TTC_32;
else if (mode <= 64)
mtl_tx_op |= MTL_OP_MODE_TTC_64;
else if (mode <= 96)
mtl_tx_op |= MTL_OP_MODE_TTC_96;
else if (mode <= 128)
mtl_tx_op |= MTL_OP_MODE_TTC_128;
else if (mode <= 192)
mtl_tx_op |= MTL_OP_MODE_TTC_192;
else if (mode <= 256)
mtl_tx_op |= MTL_OP_MODE_TTC_256;
else if (mode <= 384)
mtl_tx_op |= MTL_OP_MODE_TTC_384;
else
mtl_tx_op |= MTL_OP_MODE_TTC_512;
}
/* For an IP with DWC_EQOS_NUM_TXQ == 1, the fields TXQEN and TQS are RO
* with reset values: TXQEN on, TQS == DWC_EQOS_TXFIFO_SIZE.
* For an IP with DWC_EQOS_NUM_TXQ > 1, the fields TXQEN and TQS are R/W
* with reset values: TXQEN off, TQS 256 bytes.
*
* TXQEN must be written for multi-channel operation and TQS must
* reflect the available fifo size per queue (total fifo size / number
* of enabled queues).
*/
mtl_tx_op &= ~MTL_OP_MODE_TXQEN_MASK;
if (qmode != MTL_QUEUE_AVB)
mtl_tx_op |= MTL_OP_MODE_TXQEN;
else
mtl_tx_op |= MTL_OP_MODE_TXQEN_AV;
mtl_tx_op &= ~MTL_OP_MODE_TQS_MASK;
mtl_tx_op |= tqs << MTL_OP_MODE_TQS_SHIFT;
writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel));
}
static void dwmac4_get_hw_feature(void __iomem *ioaddr,
struct dma_features *dma_cap)
{
u32 hw_cap = readl(ioaddr + GMAC_HW_FEATURE0);
/* MAC HW feature0 */
dma_cap->mbps_10_100 = (hw_cap & GMAC_HW_FEAT_MIISEL);
dma_cap->mbps_1000 = (hw_cap & GMAC_HW_FEAT_GMIISEL) >> 1;
dma_cap->half_duplex = (hw_cap & GMAC_HW_FEAT_HDSEL) >> 2;
dma_cap->hash_filter = (hw_cap & GMAC_HW_FEAT_VLHASH) >> 4;
dma_cap->multi_addr = (hw_cap & GMAC_HW_FEAT_ADDMAC) >> 18;
dma_cap->pcs = (hw_cap & GMAC_HW_FEAT_PCSSEL) >> 3;
dma_cap->sma_mdio = (hw_cap & GMAC_HW_FEAT_SMASEL) >> 5;
dma_cap->pmt_remote_wake_up = (hw_cap & GMAC_HW_FEAT_RWKSEL) >> 6;
dma_cap->pmt_magic_frame = (hw_cap & GMAC_HW_FEAT_MGKSEL) >> 7;
/* MMC */
dma_cap->rmon = (hw_cap & GMAC_HW_FEAT_MMCSEL) >> 8;
/* IEEE 1588-2008 */
dma_cap->atime_stamp = (hw_cap & GMAC_HW_FEAT_TSSEL) >> 12;
/* 802.3az - Energy-Efficient Ethernet (EEE) */
dma_cap->eee = (hw_cap & GMAC_HW_FEAT_EEESEL) >> 13;
/* TX and RX csum */
dma_cap->tx_coe = (hw_cap & GMAC_HW_FEAT_TXCOSEL) >> 14;
dma_cap->rx_coe = (hw_cap & GMAC_HW_FEAT_RXCOESEL) >> 16;
/* MAC HW feature1 */
hw_cap = readl(ioaddr + GMAC_HW_FEATURE1);
dma_cap->av = (hw_cap & GMAC_HW_FEAT_AVSEL) >> 20;
dma_cap->tsoen = (hw_cap & GMAC_HW_TSOEN) >> 18;
/* RX and TX FIFO sizes are encoded as log2(n / 128). Undo that by
* shifting and store the sizes in bytes.
*/
dma_cap->tx_fifo_size = 128 << ((hw_cap & GMAC_HW_TXFIFOSIZE) >> 6);
dma_cap->rx_fifo_size = 128 << ((hw_cap & GMAC_HW_RXFIFOSIZE) >> 0);
/* MAC HW feature2 */
hw_cap = readl(ioaddr + GMAC_HW_FEATURE2);
/* TX and RX number of channels */
dma_cap->number_rx_channel =
((hw_cap & GMAC_HW_FEAT_RXCHCNT) >> 12) + 1;
dma_cap->number_tx_channel =
((hw_cap & GMAC_HW_FEAT_TXCHCNT) >> 18) + 1;
/* TX and RX number of queues */
dma_cap->number_rx_queues =
((hw_cap & GMAC_HW_FEAT_RXQCNT) >> 0) + 1;
dma_cap->number_tx_queues =
((hw_cap & GMAC_HW_FEAT_TXQCNT) >> 6) + 1;
/* PPS output */
dma_cap->pps_out_num = (hw_cap & GMAC_HW_FEAT_PPSOUTNUM) >> 24;
/* IEEE 1588-2002 */
dma_cap->time_stamp = 0;
/* MAC HW feature3 */
hw_cap = readl(ioaddr + GMAC_HW_FEATURE3);
/* 5.10 Features */
dma_cap->asp = (hw_cap & GMAC_HW_FEAT_ASP) >> 28;
dma_cap->frpes = (hw_cap & GMAC_HW_FEAT_FRPES) >> 13;
dma_cap->frpbs = (hw_cap & GMAC_HW_FEAT_FRPBS) >> 11;
dma_cap->frpsel = (hw_cap & GMAC_HW_FEAT_FRPSEL) >> 10;
}
/* Enable/disable TSO feature and set MSS */
static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan)
{
u32 value;
if (en) {
/* enable TSO */
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
writel(value | DMA_CONTROL_TSE,
ioaddr + DMA_CHAN_TX_CONTROL(chan));
} else {
/* enable TSO */
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
writel(value & ~DMA_CONTROL_TSE,
ioaddr + DMA_CHAN_TX_CONTROL(chan));
}
}
static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan)
{
u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
value &= ~DMA_RBSZ_MASK;
value |= (bfsize << DMA_RBSZ_SHIFT) & DMA_RBSZ_MASK;
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
}
const struct stmmac_dma_ops dwmac4_dma_ops = {
.reset = dwmac4_dma_reset,
.init = dwmac4_dma_init,
.init_chan = dwmac4_dma_init_channel,
.init_rx_chan = dwmac4_dma_init_rx_chan,
.init_tx_chan = dwmac4_dma_init_tx_chan,
.axi = dwmac4_dma_axi,
.dump_regs = dwmac4_dump_dma_regs,
.dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
.dma_tx_mode = dwmac4_dma_tx_chan_op_mode,
.enable_dma_irq = dwmac4_enable_dma_irq,
.disable_dma_irq = dwmac4_disable_dma_irq,
.start_tx = dwmac4_dma_start_tx,
.stop_tx = dwmac4_dma_stop_tx,
.start_rx = dwmac4_dma_start_rx,
.stop_rx = dwmac4_dma_stop_rx,
.dma_interrupt = dwmac4_dma_interrupt,
.get_hw_feature = dwmac4_get_hw_feature,
.rx_watchdog = dwmac4_rx_watchdog,
.set_rx_ring_len = dwmac4_set_rx_ring_len,
.set_tx_ring_len = dwmac4_set_tx_ring_len,
.set_rx_tail_ptr = dwmac4_set_rx_tail_ptr,
.set_tx_tail_ptr = dwmac4_set_tx_tail_ptr,
.enable_tso = dwmac4_enable_tso,
.set_bfsize = dwmac4_set_bfsize,
};
const struct stmmac_dma_ops dwmac410_dma_ops = {
.reset = dwmac4_dma_reset,
.init = dwmac4_dma_init,
.init_chan = dwmac4_dma_init_channel,
.init_rx_chan = dwmac4_dma_init_rx_chan,
.init_tx_chan = dwmac4_dma_init_tx_chan,
.axi = dwmac4_dma_axi,
.dump_regs = dwmac4_dump_dma_regs,
.dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
.dma_tx_mode = dwmac4_dma_tx_chan_op_mode,
.enable_dma_irq = dwmac410_enable_dma_irq,
.disable_dma_irq = dwmac4_disable_dma_irq,
.start_tx = dwmac4_dma_start_tx,
.stop_tx = dwmac4_dma_stop_tx,
.start_rx = dwmac4_dma_start_rx,
.stop_rx = dwmac4_dma_stop_rx,
.dma_interrupt = dwmac4_dma_interrupt,
.get_hw_feature = dwmac4_get_hw_feature,
.rx_watchdog = dwmac4_rx_watchdog,
.set_rx_ring_len = dwmac4_set_rx_ring_len,
.set_tx_ring_len = dwmac4_set_tx_ring_len,
.set_rx_tail_ptr = dwmac4_set_rx_tail_ptr,
.set_tx_tail_ptr = dwmac4_set_tx_tail_ptr,
.enable_tso = dwmac4_enable_tso,
.set_bfsize = dwmac4_set_bfsize,
};
|