blob: 251f0c7115aa8653f780c77e5551bafebbe959a9 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung LMS380KF01 display panel
description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
used with internal or external backlight control.
The panel must obey the rules for a SPI slave device as specified in
spi/spi-controller.yaml
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
const: samsung,lms380kf01
reg: true
interrupts:
description: provides an optional ESD (electrostatic discharge)
interrupt that signals abnormalities in the display hardware.
This can also be raised for other reasons like erroneous
configuration.
maxItems: 1
reset-gpios: true
vci-supply:
description: regulator that supplies the VCI analog voltage
usually around 3.0 V
vccio-supply:
description: regulator that supplies the VCCIO voltage usually
around 1.8 V
backlight: true
spi-cpha: true
spi-cpol: true
spi-max-frequency:
maximum: 1200000
port: true
required:
- compatible
- reg
- spi-cpha
- spi-cpol
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
spi {
compatible = "spi-gpio";
sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "samsung,lms380kf01";
spi-max-frequency = <1200000>;
spi-cpha;
spi-cpol;
reg = <0>;
vci-supply = <&lcd_3v0_reg>;
vccio-supply = <&lcd_1v8_reg>;
reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio>;
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
};
...
|
