1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
Renesas R-Car LVDS Encoder
==========================
These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
Gen2, R-Car Gen3 and RZ/G SoCs.
Required properties:
- compatible : Shall contain one of
- "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
- "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
- "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
- "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
- "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
- "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
- "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
- "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders
- "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders
- "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
- reg: Base address and length for the memory-mapped registers
- clocks: A list of phandles + clock-specifier pairs, one for each entry in
the clock-names property.
- clock-names: Name of the clocks. This property is model-dependent.
- The functional clock, which mandatory for all models, shall be listed
first, and shall be named "fck".
- On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or
DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
numerical index.
- When the clocks property only contains the functional clock, the
clock-names property may be omitted.
- resets: A phandle + reset specifier for the module reset
Required nodes:
The LVDS encoder has two video ports. Their connections are modelled using the
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
- Video port 0 corresponds to the parallel RGB input
- Video port 1 corresponds to the LVDS output
Each port shall have a single endpoint.
Example:
lvds0: lvds@feb90000 {
compatible = "renesas,r8a7790-lvds";
reg = <0 0xfeb90000 0 0x1c>;
clocks = <&cpg CPG_MOD 726>;
resets = <&cpg 726>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};
};
|
