1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
|
Freescale Reference Board Bindings
This document describes device tree bindings for various devices that
exist on some Freescale reference boards.
* Board Control and Status (BCSR)
Required properties:
- compatible : Should be "fsl,<board>-bcsr"
- reg : Offset and length of the register set for the device
Example:
bcsr@f8000000 {
compatible = "fsl,mpc8360mds-bcsr";
reg = <f8000000 8000>;
};
* Freescale on-board FPGA
This is the memory-mapped registers for on board FPGA.
Required properties:
- compatible: should be a board-specific string followed by a string
indicating the type of FPGA. Example:
"fsl,<board>-fpga", "fsl,fpga-pixis", or
"fsl,<board>-fpga", "fsl,fpga-qixis"
- reg: should contain the address and the length of the FPGA register set.
Optional properties:
- interrupts: should specify event (wakeup) IRQ.
Example (P1022DS):
board-control@3,0 {
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
interrupts = <8 8 0 0>;
};
Example (LS2080A-RDB):
cpld@3,0 {
compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
reg = <0x3 0 0x10000>;
};
* Freescale BCSR GPIO banks
Some BCSR registers act as simple GPIO controllers, each such
register can be represented by the gpio-controller node.
Required properities:
- compatible : Should be "fsl,<board>-bcsr-gpio".
- reg : Should contain the address and the length of the GPIO bank
register.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example:
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr13: gpio-controller@d {
#gpio-cells = <2>;
compatible = "fsl,mpc8360mds-bcsr-gpio";
reg = <0xd 1>;
gpio-controller;
};
};
* Freescale on-board FPGA connected on I2C bus
Some Freescale boards like BSC9132QDS have on board FPGA connected on
the i2c bus.
Required properties:
- compatible: Should be a board-specific string followed by a string
indicating the type of FPGA. Example:
"fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
- reg: Should contain the address of the FPGA
Example:
fpga: fpga@66 {
compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
reg = <0x66>;
};
* Freescale on-board CPLD
Some Freescale boards like T1040RDB have an on board CPLD connected.
Required properties:
- compatible: Should be a board-specific string like "fsl,<board>-cpld"
Example:
"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
- reg: should describe CPLD registers
Example:
cpld@3,0 {
compatible = "fsl,t1040rdb-cpld";
reg = <3 0 0x300>;
};
|
