summaryrefslogtreecommitdiff
path: root/tools/vm
AgeCommit message (Collapse)AuthorFilesLines
2021-09-25tools/vm/page-types: remove dependency on opt_file for idle page trackingChangbin Du1-1/+1
Idle page tracking can also be used for process address space, not only file mappings. Without this change, using with '-i' option for process address space encounters below errors reported. $ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ... Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29tools/vm/page_owner_sort.c: check malloc() returnTang Bin1-0/+4
Link: https://lkml.kernel.org/r/20210506131402.10416-1-tangbin@cmss.chinamobile.com Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04mm: Add PG_arch_2 page flagSteven Price1-0/+2
For arm64 MTE support it is necessary to be able to mark pages that contain user space visible tags that will need to be saved/restored e.g. when swapped out. To support this add a new arch specific flag (PG_arch_2). This flag is only available on 64-bit architectures due to the limited number of spare page flags on the 32-bit ones. Signed-off-by: Steven Price <steven.price@arm.com> [catalin.marinas@arm.com: use CONFIG_64BIT for guarding this new flag] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2020-06-04tools/vm/page_owner_sort.c: filter out unneeded lineChanghee Han1-2/+3
To see a sorted result from page_owner, there must be a tiresome preprocessing step before running page_owner_sort. This patch simply filters out lines which start with "PFN" while reading the page owner report. Signed-off-by: Changhee Han <ch0.han@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/20200429052940.16968-1-ch0.han@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21tools/vm: fix cross-compile buildLucas Stach1-0/+2
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-31tools/vm/slabinfo: fix sanity checks enablingDaniel Wagner1-2/+2
The sysfs file name for enabling sanity checking is called 'sanity_checks' and not 'sanity'. The name of the file has never changed since the introduction of the slub allocator. Obviously, most people turn the checks on via the command line option and not during runtime using slabinfo. Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Tobin C. Harding" <tobin@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12tools/vm/slabinfo: add sorting info to help menuTobin C. Harding1-0/+2
Passing more than one sorting option has undefined behaviour. Add an explicit statement as such to the help menu, this also has the advantage of highlighting all the sorting options. Link: http://lkml.kernel.org/r/20190426022622.4089-5-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12tools/vm/slabinfo: add option to sort by partial slabsTobin C. Harding1-2/+7
We would like to get a better view of the level of fragmentation within the SLUB allocator. Total number of partial slabs is an indicator of fragmentation. Add a command line option (-P | --partial) to sort the slab list by total number of partial slabs. Link: http://lkml.kernel.org/r/20190426022622.4089-4-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12tools/vm/slabinfo: add partial slab listing to -XTobin C. Harding1-13/+28
We would like to see how fragmented the SLUB allocator is, one window into fragmentation is the total number of partial slabs. Currently `slabinfo -X` shows slabs sorted by loss and by size. We can use this option to also show slabs sorted by number of partial slabs. Option '-X' can be used in conjunction with '-N' to control the number of slabs shown e.g. list of top 5 slabs: slabinfo -X -N5 Add list of slabs ordered by number of partial slabs to output of `slabinfo -X`. Link: http://lkml.kernel.org/r/20190426022622.4089-3-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@iki.fi> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12tools/vm/slabinfo: order command line optionsTobin C. Harding1-35/+35
During recent discussion on LKML over SLAB vs SLUB it was suggested by Jesper that it would be nice to have a tool to view the current fragmentation of the slab allocators. CC list for this set is taken from that thread. For SLUB we have all the information for this already exposed by the kernel and also we have a userspace tool for displaying this info: tools/vm/slabinfo.c Extend slabinfo to improve the fragmentation information by enabling sorting of caches by number of partial slabs. Also add cache list sorted in this manner to the output of `slabinfo -X`. This patch (of 4): get_opt() has a spurious character within the option string. Remove it and reorder the options in alphabetic order so that it is easier to keep the options correct. Use the same ordering for command help output and long option handling code. Link: http://lkml.kernel.org/r/20190426022622.4089-2-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@iki.fi> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Cc: Qian Cai <cai@lca.pw> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-8/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 276Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should find a copy of v2 of the gnu general public license somewhere on your linux system if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.073926682@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-06tools/vm/slabinfo: clean up usage menu debug itemsTobin C. Harding1-9/+11
Attempt to make the usage comment for debug options a little cleaner. Link: http://lkml.kernel.org/r/20190212001219.27769-5-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06tools/vm/slabinfo: align usage output columnsTobin C. Harding1-3/+3
Usage message uses spaces not tabspaces, a few tabspaces have snuck in making the columns not align correctly when output. Align usage output columns using spaces instead of tabspaces. Link: http://lkml.kernel.org/r/20190212001219.27769-4-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06tools/vm/slabinfo: put options in alphabetic orderTobin C. Harding1-5/+6
Primarily the usage message lists options in alphabetic order however there are a bunch of the options that are not in alphabetic order. Put options in alphabetic order. Link: http://lkml.kernel.org/r/20190212001219.27769-3-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06tools/vm/slabinfo: update options in usage messageTobin C. Harding1-1/+1
Currently usage message list only a subset of the available options. should list them all. Update options in usage massage to include all available options. Link: http://lkml.kernel.org/r/20190212001219.27769-2-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06mm: convert PG_balloon to PG_offlineDavid Hildenbrand1-1/+1
PG_balloon was introduced to implement page migration/compaction for pages inflated in virtio-balloon. Nowadays, it is only a marker that a page is part of virtio-balloon and therefore logically offline. We also want to make use of this flag in other balloon drivers - for inflated pages or when onlining a section but keeping some pages offline (e.g. used right now by XEN and Hyper-V via set_online_page_callback()). We are going to expose this flag to dump tools like makedumpfile. But instead of exposing PG_balloon, let's generalize the concept of marking pages as logically offline, so it can be reused for other purposes later on. Rename PG_balloon to PG_offline. This is an indicator that the page is logically offline, the content stale and that it should not be touched (e.g. a hypervisor would have to allocate backing storage in order for the guest to dump an unused page). We can then e.g. exclude such pages from dumps. We replace and reuse KPF_BALLOON (23), as this shouldn't really harm (and for now the semantics stay the same). In following patches, we will make use of this bit also in other balloon drivers. While at it, document PGTABLE. [akpm@linux-foundation.org: fix comment text, per David] Link: http://lkml.kernel.org/r/20181119101616.8901-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Pankaj gupta <pagupta@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Christian Hansen <chansen3@cisco.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Young <dyoung@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Julien Freche <jfreche@vmware.com> Cc: Kairui Song <kasong@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Len Brown <len.brown@intel.com> Cc: Lianbo Jiang <lijiang@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-09tools/vm/page_owner: use page_owner_sort in the use exampleMiles Chen1-1/+3
The example in comment does not useable because the output binary is named "page_owner_sort", not "sort". Also add a reference to Documentation/vm/page_owner.rst Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28tools/vm/page-types.c: fix "kpagecount returned fewer pages than expected" ↵Anthony Yznaga1-1/+1
failures Because kpagecount_read() fakes success if map counts are not being collected, clamp the page count passed to it by walk_pfn() to the pages value returned by the preceding call to kpageflags_read(). Link: http://lkml.kernel.org/r/1543962269-26116-1-git-send-email-anthony.yznaga@oracle.com Fixes: 7f1d23e60718 ("tools/vm/page-types.c: include shared map counts") Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-05tools/vm/page-types.c: fix "defined but not used" warningNaoya Horiguchi1-6/+0
debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-05tools/vm/slabinfo.c: fix sign-compare warningNaoya Horiguchi1-2/+2
Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18tools/vm/page-types.c: add support for idle page trackingChristian Hansen1-1/+46
Add a flag which causes page-types to use the kernels's idle page tracking to mark pages idle. As the tool already prints the idle flag if set, subsequent runs will show which pages have been accessed since last run. [akpm@linux-foundation.org: simplify mark_page_idle()] [chansen3@cisco.com: reorganize mark_page_idle() logic, add docs] Link: http://lkml.kernel.org/r/20180706172237.21691-1-chansen3@cisco.com Link: http://lkml.kernel.org/r/20180612153223.13174-1-chansen3@cisco.com Signed-off-by: Christian Hansen <chansen3@cisco.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18tools/vm/page-types.c: include shared map countsChristian Hansen1-14/+59
Add a new flag that will read kpagecount for each PFN and print out the number of times the page is mapped along with the flags in the listing view. This information is useful in understanding and optimizing memory usage. Identifying pages which are not shared allows us to focus on adjusting the memory layout or access patterns for the sole owning process. Knowing the number of processes that share a page tells us how many other times we must make the same adjustments or how many processes to potentially disable. Truncated sample output: voffset map-cnt offset len flags 561a3591e 1 15fe8 1 ___U_lA____Ma_b___________________________ 561a3591f 1 2b103 1 ___U_lA____Ma_b___________________________ 561a36ca4 1 2cc78 1 ___U_lA____Ma_b___________________________ 7f588bb4e 14 2273c 1 __RU_lA____M______________________________ [akpm@linux-foundation.org: coding-style fixes] [chansen3@cisco.com: add documentation, tweak whitespace] Link: http://lkml.kernel.org/r/20180705181204.5529-1-chansen3@cisco.com Link: http://lkml.kernel.org/r/20180612153205.12879-1-chansen3@cisco.com Signed-off-by: Christian Hansen <chansen3@cisco.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08mm: mark pages in use for page tablesMatthew Wilcox1-0/+1
Define a new PageTable bit in the page_type and use it to mark pages in use as page tables. This can be helpful when debugging crashdumps or analysing memory fragmentation. Add a KPF flag to report these pages to userspace and update page-types.c to interpret that flag. Note that only pages currently accounted as NR_PAGETABLES are tracked as PageTable; this does not include pgd/p4d/pud/pmd pages. Those will be the subject of a later patch. Link: http://lkml.kernel.org/r/20180518194519.3820-4-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22tools: fix cross-compile var clobberingMartin Kelly1-1/+0
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01tools, vm: new option to specify kpageflags fileDavid Rientjes1-7/+21
page-types currently hardcodes /proc/kpageflags as the file to parse. This works when using the tool to examine the state of pageflags on the same system, but does not allow storing a snapshot of pageflags at a given time to debug issues nor on a different system. This allows the user to specify a saved version of kpageflags with a new page-types -F option. [akpm@linux-foundation.org: add "filename" to fix usage() string] [rientjes@google.com: fix layout] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801301840050.140969@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801301458180.153857@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-15tools/slabinfo-gnuplot: force to use bash shellLiu, Changcheng1-1/+1
On some linux distributions, the default link of sh is dash which deoesn't support split array like "${var//,/ }" It's better to force to use bash shell directly. Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofia Signed-off-by: Liu Changcheng <changcheng.liu@intel.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16tools: slabinfo: add "-U" option to show unreclaimable slabs onlyYang Shi1-1/+10
Patch series "oom: capture unreclaimable slab info in oom message", v10. Recently we ran into a oom issue, kernel panic due to no killable process. The dmesg shows huge unreclaimable slabs used almost 100% memory, but kdump doesn't capture vmcore due to some reason. So, it may sound better to capture unreclaimable slab info in oom message when kernel panic to aid trouble shooting and cover the corner case. Since kernel already panic, so capturing more information sounds worthy and doesn't bother normal oom killer. With the patchset, tools/vm/slabinfo has a new option, "-U", to show unreclaimable slab only. And, oom will print all non zero (num_objs * size != 0) unreclaimable slabs in oom killer message. This patch (of 3): Add "-U" option to show unreclaimable slabs only. "-U" and "-S" together can tell us what unreclaimable slabs use the most memory to help debug huge unreclaimable slabs issue. Link: http://lkml.kernel.org/r/1507152550-46205-2-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23tools/vm: add missing Makefile rulesDaniel Thompson1-0/+8
Currently the tools/vm Makefile has a rather arbitrary implicit build rule; page-types is the first value in TARGETS so lets just build that one! Additionally there is no install rule and this is needed for make -C tools vm_install to work properly. Provide a more sensible implicit build rule and a new install rule. Note that the variables names used by the install rule (DESTDIR and sbindir) are copied from prior-art in tools/power/cpupower. Link: http://lkml.kernel.org/r/20170113165630.27541-1-daniel.thompson@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27tools/vm/page_owner: increase temporary buffer sizeJoonsoo Kim1-2/+7
Page owner will be changed to store more deep stacktrace so current temporary buffer size isn't enough. Increase it. Link: http://lkml.kernel.org/r/1464230275-25791-5-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23tools/vm/slabinfo: fix an unintentional printfDan Carpenter1-1/+2
The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-25tools/vm/slabinfo: fix spelling mistake: "Ocurrences" -> "Occurrences"Colin Ian King1-1/+1
trivial fix to spelling mistake Link: http://lkml.kernel.org/r/1466672144-831-1-git-send-email-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18tools/vm/page-types.c: avoid memset() in walk_pfn() when count == 1Naoya Horiguchi1-1/+9
I found that page-types is very slow and my testing shows many timeout errors. Here's an example with a simple program allocating 1000 thps. $ time ./page-types -p $(pgrep -f test_alloc) ... real 0m17.201s user 0m16.889s sys 0m0.312s Most of time is spent in memset(). Currently memset() clears over whole buffer for every walk_pfn() call, which is inefficient when walk_pfn() is called from walk_vma(), because in that case walk_pfn() is called for each pfn. So this patch limits the zero initialization only for the first element. $ time ./page-types.patched -p $(pgrep -f test_alloc) ... real 0m0.182s user 0m0.046s sys 0m0.135s Fixes: 954e95584579 ("tools/vm/page-types.c: add memory cgroup dumping and filtering") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Suggested-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18tools/vm/page-types.c: add memory cgroup dumping and filteringKonstantin Khlebnikov1-15/+84
This adds two command line keys: -c|--cgroup path|@inode Walk only pages owned by this memory cgroup -C|--list-cgroup Show memory cgroup inodes [vdavydov@virtuozzo.com: opt_cgroup should be uint64_t. Fix conflicts with "tools/vm/page-types.c: support swap entry"] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18tools/vm/page-types.c: support swap entryNaoya Horiguchi1-1/+29
/proc/pid/pagemap (pte_to_pagemap_entry() internally) already reports about swap entry, so let's make the in-kernel utility aware of it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16slub: convert SLAB_DEBUG_FREE to SLAB_CONSISTENCY_CHECKSLaura Abbott1-1/+1
SLAB_DEBUG_FREE allows expensive consistency checks at free to be turned on or off. Expand its use to be able to turn off all consistency checks. This gives a nice speed up if you only want features such as poisoning or tracing. Credit to Mathias Krause for the original work which inspired this series Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mathias Krause <minipli@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-21tools/vm/page-types.c: support KPF_IDLENaoya Horiguchi1-0/+1
PageIdle is exported in include/uapi/linux/kernel-page-flags.h, so let's make page-types.c tool handle it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: gnuplot slabifo extended statSergey Senozhatsky1-0/+275
GNUplot `slabinfo -X' stats, collected, for example, using the following command: while [ 1 ]; do slabinfo -X >> stats; sleep 1; done `slabinfo-gnuplot.sh stats' pre-processes collected records and generate graphs (totals, slabs sorted by size, slabs sorted by size). Graphs can be [individually] regenerate with different samples range and graph width-heigh (-r %d,%d and -s %d,%d options). To visually compare N `totals' graphs: slabinfo-gnuplot.sh -t FILE1-totals FILE2-totals ... FILEN-totals Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: cosmetic globals cleanupSergey Senozhatsky1-27/+27
checkpatch.pl complains about globals being explicitly zeroed out: "ERROR: do not initialise globals to 0 or NULL". New globals, introduced in this patch set, have no explicit 0 initialization; clean up the old ones to make it less hairy. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: output sizes in bytesSergey Senozhatsky1-37/+51
Introduce "-B|--Bytes" opt to disable store_size() dynamic size scaling and report size in bytes instead. This `expands' the interface a bit, it's impossible to use printf("%6s") anymore to output sizes. Example: slabinfo -X -N 2 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a Besides, store_size() does not use powers of two for G/M/K if (value > 1000000000UL) { divisor = 100000000UL; trailer = 'G'; } else if (value > 1000000UL) { divisor = 100000UL; trailer = 'M'; } else if (value > 1000UL) { divisor = 100; trailer = 'K'; } Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: introduce extended totals modeSergey Senozhatsky1-10/+44
Add "-X|--Xtotals" opt to output extended totals summary, which includes: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) Example: ======= slabinfo --X -N 1 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 120->69 Active: 65 Memory used: 568.3M # Loss : 30.4M MRatio: 5% # Objects : 920.1K # PartObj: 161.2K ORatio: 17% Per Cache Average Min Max Total --------------------------------------------------------- #Objects 14.1K 1 227.8K 920.1K #Slabs 533 1 11.7K 34.7K #PartSlab 86 0 4.3K 5.6K %PartSlab 24% 0% 100% 16% PartObjs 17 0 129.3K 161.2K % PartObj 17% 0% 100% 17% Memory 8.7M 8.1K 384.7M 568.3M Used 8.2M 160 366.5M 537.9M Loss 468.8K 0 18.2M 30.4M Per Object Average Min Max --------------------------------------------- Memory 587 8 8.1K User 584 8 8.1K Loss 2 0 64 Slabs sorted by size ---------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 384.7M 11732/40/10 18 3 0 95 a Slabs sorted by loss ---------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 18.2M 11732/40/10 18 3 0 95 a Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: fix alternate opts namesSergey Senozhatsky1-3/+5
Fix mismatches between usage() output and real opts[] options. Add missing alternative opt names, e.g., '-S' had no '--Size' opts[] entry, etc. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: sort slabs by lossSergey Senozhatsky1-4/+21
Introduce opt "-L|--sort-loss" to sort and output slabs by loss (waste) in slabcache(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: limit the number of reported slabsSergey Senozhatsky1-3/+15
Introduce opt "-N|--lines=K" to limit the number of slabs being reported in output_slabs(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/vm/slabinfo: use getopt no_argument/optional_argumentSergey Senozhatsky1-17/+17
This patchset adds 'extended' slabinfo mode that provides additional information: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) The patches also introduces several new slabinfo options to limit the number of slabs reported, sort slabs by loss (waste); and some fixes. Extended output example (slabinfo -X -N 2): Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a The last patch in the series addresses Linus' comment from http://marc.info/?l=linux-mm&m=144148518703321&w=2 (well, it's been some time. sorry.) gnuplot script takes the slabinfo records file, where every record is a `slabinfo -X' output. So the basic workflow is, for example, as follows: while [ 1 ]; do slabinfo -X -N 2 >> stats; sleep 1; done ^C slabinfo-gnuplot.sh stats The last command will produce 3 png files (and 3 stats files) -- graph of slabinfo totals -- graph of slabs by size -- graph of slabs by loss It's also possible to select a range of records for plotting (a range of collected slabinfo outputs) via `-r 10,100` (for example); and compare totals from several measurements (to visially compare slabs behaviour (10,50 range)) using pre-parsed totals files: slabinfo-gnuplot.sh -r 10,50 -t stats-totals1 .. stats-totals2 This also, technically, supports ktest. Upload new slabinfo to target, collect the stats and give the resulting stats file to slabinfo-gnuplot This patch (of 8): Use getopt constants in `struct option' ->has_arg instead of numerical representations. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-23tools vm: Fix build due to removal of tools/lib/api/fs/debugfs.hArnaldo Carvalho de Melo1-3/+3
There were some changes in how this debugfs mounting helper is implemented/exported and we forgot to check if there were other users besides perf, fix it. Need to do a make -C tools/ everytime we do changes to tools/{lib,include} and other places where we're moving things from tools/perf/ to be used by other tools/ living code. Fixed: $ make -C tools/vm make: Entering directory '/home/git/linux/tools/vm' make -C ../lib/api make[1]: Entering directory '/home/git/linux/tools/lib/api' CC fd/array.o LD fd/libapi-in.o CC fs/fs.o CC fs/tracing_path.o LD fs/libapi-in.o CC cpu.o LD libapi-in.o AR libapi.a make[1]: Leaving directory '/home/git/linux/tools/lib/api' gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a make: Leaving directory '/home/git/linux/tools/vm' $ Reported-by: Vinson Lee <vlee@twopensource.com> Tested-by: Vinson Lee <vlee@twopensource.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Ahern <dsahern@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 60a1133a5b39 ("tools lib api fs: Remove debugfs, tracefs and findfs objects") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-09pagemap: add mmap-exclusive bit for marking pages mapped only hereKonstantin Khlebnikov1-0/+10
This patch sets bit 56 in pagemap if this page is mapped only once. It allows to detect exclusively used pages without exposing PFN: present file exclusive state 0 0 0 non-present 1 1 0 file page mapped somewhere else 1 1 1 file page mapped only here 1 0 0 anon non-CoWed page (shared with parent/child) 1 0 1 anon CoWed page (or never forked) CoWed pages in (MAP_FILE | MAP_PRIVATE) areas are anon in this context. MMap-exclusive bit doesn't reflect potential page-sharing via swapcache: page could be mapped once but has several swap-ptes which point to it. Application could detect that by swap bit in pagemap entry and touch that pte via /proc/pid/mem to get real information. See http://lkml.kernel.org/r/CAEVpBa+_RyACkhODZrRvQLs80iy0sqpdrd0AaP_-tgnX3Y9yNQ@mail.gmail.com Requested by Mark Williamson. [akpm@linux-foundation.org: fix spello] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Mark Williamson <mwilliamson@undo-software.com> Tested-by: Mark Williamson <mwilliamson@undo-software.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09pagemap: switch to the new format and do some cleanupKonstantin Khlebnikov1-17/+8
This patch removes page-shift bits (scheduled to remove since 3.11) and completes migration to the new bit layout. Also it cleans messy macro. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Williamson <mwilliamson@undo-software.com> Tested-by: Mark Williamson <mwilliamson@undo-software.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 07:21:05 +0300