| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The kernel and the user obtain an xattr value in two different ways:
kernel (EVM): uses vfs_getxattr_alloc() which obtains the xattr value from
the filesystem handler (raw value);
user (ima-evm-utils): uses vfs_getxattr() which obtains the xattr value
from the LSMs (normalized value).
Normally, this does not have an impact unless security.selinux is set with
setfattr, with a value not terminated by '\0' (this is not the recommended
way, security.selinux should be set with the appropriate tools such as
chcon and restorecon).
In this case, the kernel and the user see two different xattr values: the
former sees the xattr value without '\0' (raw value), the latter sees the
value with '\0' (value normalized by SELinux).
This could result in two different verification outcomes from EVM and
ima-evm-utils, if a signature was calculated with a security.selinux value
terminated by '\0' and the value set in the filesystem is not terminated by
'\0'. The former would report verification failure due to the missing '\0',
while the latter would report verification success (because it gets the
normalized value with '\0').
This patch mitigates this issue by comparing in evm_calc_hmac_or_hash() the
size of the xattr returned by the two xattr functions and by warning the
user if there is a discrepancy.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Output the data used in calculating the EVM digest and the resulting
digest as ascii hexadecimal strings.
Suggested-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> (CONFIG_DYNAMIC_DEBUG)
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com> (Use %zu for size_t)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Currently, the evm_config_default_xattrnames array contains xattr names
only related to LSMs which are enabled in the kernel configuration.
However, EVM portable signatures do not depend on local information and a
vendor might include in the signature calculation xattrs that are not
enabled in the target platform.
Just including all xattrs names in evm_config_default_xattrnames is not a
safe approach, because a target system might have already calculated
signatures or HMACs based only on the enabled xattrs. After applying this
patch, EVM would verify those signatures and HMACs with all xattrs instead.
The non-enabled ones, which could possibly exist, would cause a
verification error.
Thus, this patch adds a new field named enabled to the xattr_list
structure, which is set to true if the LSM associated to a given xattr name
is enabled in the kernel configuration. The non-enabled xattrs are taken
into account only in evm_calc_hmac_or_hash(), if the passed security.evm
type is EVM_XATTR_PORTABLE_DIGSIG.
The new function evm_protected_xattr_if_enabled() has been defined so that
IMA can include all protected xattrs and not only the enabled ones in the
measurement list, if the new template fields xattrnames, xattrlengths or
xattrvalues have been included in the template format.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
tmp_tfm is allocated, but not freed on subsequent kmalloc failure, which
leads to a memory leak. Free tmp_tfm.
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[zohar@linux.ibm.com: formatted/reworded patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 0b6cf6b97b7e ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
|
|
The IS_ERR_OR_NULL() function has two conditions and if we got really
unlucky we could hit a race where "ptr" started as an error pointer and
then was set to NULL. Both conditions would be false even though the
pointer at the end was NULL.
This patch fixes the problem by ensuring that "*tfm" can only be NULL
or valid. I have introduced a "tmp_tfm" variable to make that work. I
also reversed a condition and pulled the code in one tab.
Reported-by: Roberto Sassu <roberto.sassu@huawei.com>
Fixes: 53de3b080d5e ("evm: Check also if *tfm is an error pointer in init_desc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Don't immediately return if the signature is portable and security.ima is
not present. Just set error so that memory allocated is freed before
returning from evm_calc_hmac_or_hash().
Fixes: 50b977481fce9 ("EVM: Add support for portable signature format")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
This patch fixes the following warning and few other instances of
traversal of evm_config_xattrnames list:
[ 32.848432] =============================
[ 32.848707] WARNING: suspicious RCU usage
[ 32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted
[ 32.849308] -----------------------------
[ 32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!!
Since entries are only added to the list and never deleted, use
list_for_each_entry_lockless() instead of list_for_each_entry_rcu for
traversing the list. Also, add a relevant comment in evm_secfs.c to
indicate this fact.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
This patch avoids a kernel panic due to accessing an error pointer set by
crypto_alloc_shash(). It occurs especially when there are many files that
require an unsupported algorithm, as it would increase the likelihood of
the following race condition:
Task A: *tfm = crypto_alloc_shash() <= error pointer
Task B: if (*tfm == NULL) <= *tfm is not NULL, use it
Task B: rc = crypto_shash_init(desc) <= panic
Task A: *tfm = NULL
This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new
crypto context must be created.
Cc: stable@vger.kernel.org
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The #define for formatting log messages, pr_fmt, is duplicated in the
files under security/integrity.
This change moves the definition to security/integrity/integrity.h and
removes the duplicate definitions in the other files under
security/integrity.
With this change, the messages in the following files will be prefixed
with 'integrity'.
security/integrity/platform_certs/platform_keyring.c
security/integrity/platform_certs/load_powerpc.c
security/integrity/platform_certs/load_uefi.c
security/integrity/iint.c
e.g. "integrity: Error adding keys to platform keyring %s\n"
And the messages in the following file will be prefixed with 'ima'.
security/integrity/ima/ima_mok.c
e.g. "ima: Allocating IMA blacklist keyring.\n"
For the rest of the files under security/integrity, there will be no
change in the message format.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs"
This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus
effectively commits
7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION")
2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL")
that the merge brought in).
It turns out that it breaks booting with an encrypted volume, and Eric
biggers reports that it also breaks the fscrypt tests [1] and loading of
in-kernel X.509 certificates [2].
The root cause of all the breakage is likely the same, but David Howells
is off email so rather than try to work it out it's getting reverted in
order to not impact the rest of the merge window.
[1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/
[2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/
Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
|
|
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch prevents memory access beyond the evm_tfm array by checking the
validity of the index (hash algorithm) passed to init_desc(). The hash
algorithm can be arbitrarily set if the security.ima xattr type is not
EVM_XATTR_HMAC.
Fixes: 5feeb61183dde ("evm: Allow non-SHA1 digital signatures")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of sizeof use pre-defined constant for UUID representation.
While here, drop the implementation details of uuid_t type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add 1472-byte test to tcrypt for IPsec
- Reintroduced crypto stats interface with numerous changes
- Support incremental algorithm dumps
Algorithms:
- Add xchacha12/20
- Add nhpoly1305
- Add adiantum
- Add streebog hash
- Mark cts(cbc(aes)) as FIPS allowed
Drivers:
- Improve performance of arm64/chacha20
- Improve performance of x86/chacha20
- Add NEON-accelerated nhpoly1305
- Add SSE2 accelerated nhpoly1305
- Add AVX2 accelerated nhpoly1305
- Add support for 192/256-bit keys in gcmaes AVX
- Add SG support in gcmaes AVX
- ESN for inline IPsec tx in chcr
- Add support for CryptoCell 703 in ccree
- Add support for CryptoCell 713 in ccree
- Add SM4 support in ccree
- Add SM3 support in ccree
- Add support for chacha20 in caam/qi2
- Add support for chacha20 + poly1305 in caam/jr
- Add support for chacha20 + poly1305 in caam/qi2
- Add AEAD cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
crypto: skcipher - remove remnants of internal IV generators
crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
crypto: salsa20-generic - don't unnecessarily use atomic walk
crypto: skcipher - add might_sleep() to skcipher_walk_virt()
crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
crypto: cavium/nitrox - Added AEAD cipher support
crypto: mxc-scc - fix build warnings on ARM64
crypto: api - document missing stats member
crypto: user - remove unused dump functions
crypto: chelsio - Fix wrong error counter increments
crypto: chelsio - Reset counters on cxgb4 Detach
crypto: chelsio - Handle PCI shutdown event
crypto: chelsio - cleanup:send addr as value in function argument
crypto: chelsio - Use same value for both channel in single WR
crypto: chelsio - Swap location of AAD and IV sent in WR
crypto: chelsio - remove set but not used variable 'kctx_len'
crypto: ux500 - Use proper enum in hash_set_dma_transfer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: aesni - Add scatter/gather avx stubs, and use them in C
crypto: aesni - Introduce partial block macro
..
|
|
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Constify some static data that is never modified,
so that it is placed in .rodata.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
SHA1 is reasonable in HMAC constructs, but it's desirable to be able to
use stronger hashes in digital signatures. Modify the EVM crypto code so
the hash type is imported from the digital signature and passed down to
the hash calculation code, and return the digest size to higher layers
for validation.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
When EVM attempts to appraise a file signed with a crypto algorithm the
kernel doesn't have support for, it will cause the kernel to trigger a
module load. If the EVM policy includes appraisal of kernel modules this
will in turn call back into EVM - since EVM is holding a lock until the
crypto initialisation is complete, this triggers a deadlock. Add a
CRYPTO_NOLOAD flag and skip module loading if it's set, and add that flag
in the EVM case in order to fail gracefully with an error message
instead of deadlocking.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"From Mimi:
- add run time support for specifying additional security xattrs
included in the security.evm HMAC/signature
- some code clean up and bug fixes"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
EVM: unlock on error path in evm_read_xattrs()
EVM: prevent array underflow in evm_write_xattrs()
EVM: Fix null dereference on xattr when xattr fails to allocate
EVM: fix memory leak of temporary buffer 'temp'
IMA: use list_splice_tail_init_rcu() instead of its open coded variant
ima: use match_string() helper
ima: fix updating the ima_appraise flag
ima: based on policy verify firmware signatures (pre-allocated buffer)
ima: define a new policy condition based on the filesystem name
EVM: Allow runtime modification of the set of verified xattrs
EVM: turn evm_config_xattrnames into a list
integrity: Add an integrity directory in securityfs
ima: Remove unused variable ima_initialized
ima: Unify logging
ima: Reflect correct permissions for policy
|
|
Sites may wish to provide additional metadata alongside files in order
to make more fine-grained security decisions[1]. The security of this is
enhanced if this metadata is protected, something that EVM makes
possible. However, the kernel cannot know about the set of extended
attributes that local admins may wish to protect, and hardcoding this
policy in the kernel makes it difficult to change over time and less
convenient for distributions to enable.
This patch adds a new /sys/kernel/security/integrity/evm/evm_xattrs node,
which can be read to obtain the current set of EVM-protected extended
attributes or written to in order to add new entries. Extending this list
will not change the validity of any existing signatures provided that the
file in question does not have any of the additional extended attributes -
missing xattrs are skipped when calculating the EVM hash.
[1] For instance, a package manager could install information about the
package uploader in an additional extended attribute. Local LSM policy
could then be associated with that extended attribute in order to
restrict the privileges available to packages from less trusted
uploaders.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Use a list of xattrs rather than an array - this makes it easier to
extend the list at runtime.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The kernel should not calculate new hmacs for mounts done by
non-root users. Update evm_calc_hmac_or_hash() to refuse to
calculate new hmacs for mounts for non-init user namespaces.
Cc: linux-integrity@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: James Morris <james.l.morris@oracle.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
These variables are not used where they are was defined. There is no
point in declaring them there as extern. Move and constify them, saving
2 bytes.
Function old new delta
init_desc 273 271 -2
Total: Before=2112094, After=2112092, chg -0.00%
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The EVM signature includes the inode number and (optionally) the
filesystem UUID, making it impractical to ship EVM signatures in
packages. This patch adds a new portable format intended to allow
distributions to include EVM signatures. It is identical to the existing
format but hardcodes the inode and generation numbers to 0 and does not
include the filesystem UUID even if the kernel is configured to do so.
Removing the inode means that the metadata and signature from one file
could be copied to another file without invalidating it. This is avoided
by ensuring that an IMA xattr is present during EVM validation.
Portable signatures are intended to be immutable - ie, they will never
be transformed into HMACs.
Based on earlier work by Dmitry Kasatkin and Mikhail Kurinnoi.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Cc: Mikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
A system can validate EVM digital signatures without requiring an HMAC
key, but every EVM validation will generate a kernel error. Change this
so we only generate an error once.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This reverts commit 0b3c9761d1e405514a551ed24d3ea89aea26ce14.
Seth Forshee <seth.forshee@canonical.com> writes:
> All right, I think 0b3c9761d1e405514a551ed24d3ea89aea26ce14 should be
> reverted then. EVM is a machine-local integrity mechanism, and so it
> makes sense that the signature would be based on the kernel's notion of
> the uid and not the filesystem's.
I added a commment explaining why the EVM hmac needs to be in the
kernel's notion of uid and gid, not the filesystems to prevent
remounting the filesystem and gaining unwaranted trust in files.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Right now, various places in the kernel check for the existence of
getxattr, setxattr, and removexattr inode operations and directly call
those operations. Switch to helper functions and test for the IOP_XATTR
flag instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The EVM HMAC should be calculated using the on disk user and
group ids, so the k[ug]ids in the inode must be translated
relative to the s_user_ns of the inode's super block.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
A crypto HW kernel module can possibly initialize the EVM key from the
kernel __init code to enable EVM before calling the 'init' process.
This patch provides a function evm_set_key() to set the EVM key
directly without using the KEY subsystem.
Changes in v4:
* kernel-doc style for evm_set_key
Changes in v3:
* error reporting moved to evm_set_key
* EVM_INIT_HMAC moved to evm_set_key
* added bitop to prevent key setting race
Changes in v2:
* use size_t for key size instead of signed int
* provide EVM_MAX_KEY_SIZE macro in <linux/evm.h>
* provide EVM_MIN_KEY_SIZE macro in <linux/evm.h>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
In order to enable EVM before starting the 'init' process,
evm_initialized needs to be non-zero. Previously non-zero indicated
that the HMAC key was loaded. When EVM loads the X509 before calling
'init', with this patch it is now possible to enable EVM to start
signature based verification.
This patch defines bits to enable EVM if a key of any type is loaded.
Changes in v3:
* print error message if key is not set
Changes in v2:
* EVM_STATE_KEY_SET replaced by EVM_INIT_HMAC
* EVM_STATE_X509_SET replaced by EVM_INIT_X509
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.
Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net
|
|
most of the ->d_inode uses there refer to the same inode IO would
go to, i.e. d_backing_inode()
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Using HMAC version limits the posibility to arbitrarily add new
attributes such as SMACK64EXEC to the hmac calculation.
This patch replaces hmac version with attribute mask.
Desired attributes can be enabled with configuration parameter.
It allows to build kernels which works with previously labeled
filesystems.
Currently supported attribute is 'fsuuid' which is equivalent of
the former version 2.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Between checkpatch changes (eg. sizeof) and inconsistencies between
Lindent and checkpatch, unfixed checkpatch errors make it difficult
to see new errors. This patch fixes them. Some lines with over 80 chars
remained unchanged to improve code readability.
The "extern" keyword is removed from internal evm.h to make it consistent
with internal ima.h.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Convert printks to pr_<level>.
Add pr_fmt.
Remove embedded prefixes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"This is basically a maintenance update for the TPM driver and EVM/IMA"
Fix up conflicts in lib/digsig.c and security/integrity/ima/ima_main.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (45 commits)
tpm/ibmvtpm: build only when IBM pseries is configured
ima: digital signature verification using asymmetric keys
ima: rename hash calculation functions
ima: use new crypto_shash API instead of old crypto_hash
ima: add policy support for file system uuid
evm: add file system uuid to EVM hmac
tpm_tis: check pnp_acpi_device return code
char/tpm/tpm_i2c_stm_st33: drop temporary variable for return value
char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probe
char/tpm/tpm_i2c_stm_st33: Remove __devexit attribute
char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignment
tpm_i2c_stm_st33: removed unused variables/code
TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startup
tpm: Fix cancellation of TPM commands (interrupt mode)
tpm: Fix cancellation of TPM commands (polling mode)
tpm: Store TPM vendor ID
TPM: Work around buggy TPMs that block during continue self test
tpm_i2c_stm_st33: fix oops when i2c client is unavailable
char/tpm: Use struct dev_pm_ops for power management
TPM: STMicroelectronics ST33 I2C BUILD STUFF
...
|
|
EVM uses the same key for all file systems to calculate the HMAC,
making it possible to paste inodes from one file system on to another
one, without EVM being able to detect it. To prevent such an attack,
it is necessary to make the EVM HMAC file system specific.
This patch uses the file system UUID, a file system unique identifier,
to bind the EVM HMAC to the file system. The value inode->i_sb->s_uuid
is used for the HMAC hash calculation, instead of using it for deriving
the file system specific key. Initializing the key for every inode HMAC
calculation is a bit more expensive operation than adding the uuid to
the HMAC hash.
Changing the HMAC calculation method or adding additional info to the
calculation, requires existing EVM labeled file systems to be relabeled.
This patch adds a Kconfig HMAC version option for backwards compatability.
Changelog v1:
- squash "hmac version setting"
Changelog v0:
- add missing Kconfig depends (Mimi)
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The following lines of code produce a kernel oops.
fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
fchmod(fd, 0666);
[ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 139.924982] IP: [< (null)>] (null)
[ 139.924982] *pde = 00000000
[ 139.924982] Oops: 0000 [#5] SMP
[ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button
[ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs
[ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 139.924982] EIP is at 0x0
[ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2
[ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4
[ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0
[ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 139.924982] DR6: ffff0ff0 DR7: 00000400
[ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000)
[ 139.924982] Stack:
[ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940
[ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3
[ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08
[ 139.924982] Call Trace:
[ 139.924982] [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62
[ 139.924982] [<c1203964>] evm_inode_post_setattr+0x22/0x26
[ 139.924982] [<c10e20c3>] notify_change+0x25f/0x281
[ 139.924982] [<c10cbf56>] chmod_common+0x59/0x76
[ 139.924982] [<c10e27a1>] ? put_unused_fd+0x33/0x33
[ 139.924982] [<c10cca09>] sys_fchmod+0x39/0x5c
[ 139.924982] [<c13f4f30>] syscall_call+0x7/0xb
[ 139.924982] Code: Bad EIP value.
This happens because sockets do not define the removexattr operation.
Before removing the xattr, verify the removexattr function pointer is
not NULL.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Cc: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Conflicts:
security/integrity/evm/evm_crypto.c
Resolved upstream fix vs. next conflict manually.
Signed-off-by: James Morris <jmorris@namei.org>
|
