summaryrefslogtreecommitdiff
path: root/net/ethtool/strset.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-14ethtool: strset: fix message length calculationJakub Kicinski1-0/+2
Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :) Reported-by: syzbot+59aa77b92d06cd5a54f2@syzkaller.appspotmail.com Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17ethtool: add interface to read RMON statsJakub Kicinski1-0/+5
Most devices maintain RMON (RFC 2819) stats - particularly the "histogram" of packets received by size. Unlike other RFCs which duplicate IEEE stats, the short/oversized frame counters in RMON don't seem to match IEEE stats 1-to-1 either, so expose those, too. Do not expose basic packet, CRC errors etc - those are already otherwise covered. Because standard defines packet ranges only up to 1518, and everything above that should theoretically be "oversized" - devices often create their own ranges. Going beyond what the RFC defines - expose the "histogram" in the Tx direction (assume for now that the ranges will be the same). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17ethtool: add interface to read standard MAC Ctrl statsJakub Kicinski1-0/+5
Number of devices maintains the standard-based MAC control counters for control frames. Add a API for those. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17ethtool: add interface to read standard MAC statsJakub Kicinski1-0/+5
Most of the MAC statistics are included in struct rtnl_link_stats64, but some fields are aggregated. Besides it's good to expose these clearly hardware stats separately. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17ethtool: add a new command for reading standard statsJakub Kicinski1-0/+10
Add an interface for reading standard stats, including stats which don't have a corresponding control interface. Start with IEEE 802.3 PHY stats. There seems to be only one stat to expose there. Define API to not require user space changes when new stats or groups are added. Groups are based on bitset, stats have a string set associated. v1: wrap stats in a nest Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-16ethtool: fix string set id checkMichal Kubecek1-1/+1
Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ethtool: strset: allow ETHTOOL_A_STRSET_COUNTS_ONLY attrJohannes Berg1-0/+1
The ETHTOOL_A_STRSET_COUNTS_ONLY flag attribute was previously not allowed to be used, but now due to the policy size reduction we would access the tb[] array out of bounds since we tried to check for the attribute despite it not being accepted. Fix both issues by adding it correctly to the appropriate policy. Fixes: ff419afa4310 ("ethtool: trim policy tables") Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06ethtool: link up ethnl_header_policy as a nested policyJakub Kicinski1-1/+2
To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: trim policy tablesJakub Kicinski1-13/+7
Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up get policies to opsJakub Kicinski1-3/+1
Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10ethtool: add tunnel info interfaceJakub Kicinski1-0/+5
Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Uninline PHY ethtool statistics operationsFlorian Fainelli1-4/+7
Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22ethtool: count header size in reply size estimateMichal Kubecek1-1/+0
As ethnl_request_ops::reply_size handlers do not include common header size into calculated/estimated reply size, it needs to be added in ethnl_default_doit() and ethnl_default_notify() before allocating the message. On the other hand, strset_reply_size() should not add common header size. Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ethtool: add timestamping related string setsMichal Kubecek1-0/+15
Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27ethtool: provide WoL settings with WOL_GET requestMichal Kubecek1-0/+5
Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27ethtool: provide message mask with DEBUG_GET requestMichal Kubecek1-0/+5
Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27ethtool: fix kernel-doc descriptionsMichal Kubecek1-0/+1
Fix missing or incorrect function argument and struct member descriptions. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09ethtool: potential NULL dereference in strset_prepare_data()Dan Carpenter1-0/+1
Smatch complains that the NULL checking isn't done consistently: net/ethtool/strset.c:253 strset_prepare_data() error: we previously assumed 'dev' could be null (see line 233) It looks like there is a missing return on this path. Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28ethtool: provide string sets with STRSET_GET requestMichal Kubecek1-0/+425
Requests a contents of one or more string sets, i.e. indexed arrays of strings; this information is provided by ETHTOOL_GSSET_INFO and ETHTOOL_GSTRINGS commands of ioctl interface. Unlike ioctl interface, all information can be retrieved with one request and mulitple string sets can be requested at once. There are three types of requests: - no NLM_F_DUMP, no device: get "global" stringsets - no NLM_F_DUMP, with device: get string sets related to the device - NLM_F_DUMP, no device: get device related string sets for all devices Client can request either all string sets of given type (global or device related) or only specific sets. With ETHTOOL_A_STRSET_COUNTS flag set, only set sizes (numbers of strings) are returned. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 23:30:49 +0300