summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/max310x.c
AgeCommit message (Expand)AuthorFilesLines
2018-06-28serial: max310x: Check the clock readinessJan Kundrát1-4/+10
2018-02-28gpio: serial: max310x: Use HW type for gpio_chip's labelJan Kundrát1-1/+1
2018-01-09gpio: serial: max310x: Support open-drain configuration for GPIOsJan Kundrát1-0/+22
2017-12-19serial: max310x: Reduce RX work starvationJan Kundrát1-13/+10
2017-12-19serial: max310x: Use batched reads when reasonably safeJan Kundrát1-40/+86
2017-12-19serial: max310x: use a batch write op for UART transmitJan Kundrát1-7/+29
2017-12-19serial: max310x: Support IRQ sharing with other devicesJan Kundrát1-6/+14
2017-12-19serial: max310x: Do not hard-code the IRQ typeJan Kundrát1-5/+3
2017-12-15serial: max310x: Fix invalid memory access during GPIO initJan Kundrát1-17/+17
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman1-5/+0
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
2017-01-12serial: max310x: Add support for newer silicon revisionsAlexander Shiyan1-1/+1
2016-09-15serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULLLiu Xiang1-1/+1
2016-06-25serial: max310x: Assign port line automaticallyAlexander Shiyan1-9/+32
2016-06-25serial: max310x: Unregister UARTs on errorAlexander Shiyan1-0/+3
2016-06-25serial: max310x: Remove duplicate bits definitionAlexander Shiyan1-9/+4
2016-06-25serial: max310x: Register UART driver at module_initAlexander Shiyan1-31/+48
2016-06-25serial: max310x: Using resource-managed function for GPIOAlexander Shiyan1-12/+5
2016-06-25serial: max310x: Fix RS485 handlingAlexander Shiyan1-14/+27
2016-04-26serial: max310x: use gpiochip data pointerLinus Walleij1-6/+6
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis1-1/+0
2014-11-07drivers/max310: Use the rs485 functions on serial_coreRicardo Ribalda Delgado1-43/+27
2014-11-06serial/max310x: Remove obsolete #ifset TIOC[SG]RS485Ricardo Ribalda Delgado1-2/+0
2014-11-06max310x: max3109_detect should use indirect addressing in SPI mode for REVID ...Gregory Hermant1-1/+4
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe1-6/+4
2014-07-10serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan1-1/+0
2014-06-20serial: Fix IGNBRK handlingPeter Hurley1-1/+1
2014-03-18serial: max310x: Add missing #include <linux/uaccess.h>Geert Uytterhoeven1-0/+1
2014-02-16serial: max310x: Fix sparse warningsAlexander Shiyan1-4/+2
2014-02-14serial: max310x: Fix build errorAlexander Shiyan1-4/+6
2014-02-14Revert "serial: max310x: Fix build error"Greg Kroah-Hartman1-2/+1
2014-02-13serial: max310x: Fix build warningAlexander Shiyan1-1/+1
2014-02-13serial: max310x: Fix build errorAlexander Shiyan1-1/+2
2014-02-13serial: max310x: Add devicetree supportAlexander Shiyan1-9/+32
2014-02-13serial: max310x: Driver cleanupAlexander Shiyan1-29/+5
2014-02-13serial: max310x: Add support for RS-485 modeAlexander Shiyan1-21/+56
2014-02-13serial: max310x: Add missing mutex_destroy() on driver exitAlexander Shiyan1-2/+5
2014-02-13serial: max310x: Always use dynamic GPIO ID assignmentAlexander Shiyan1-27/+28
2014-02-13serial: max310x: Migrate to CLK APIAlexander Shiyan1-31/+55
2014-02-13serial: max310x: Move all SPI-dependent stuff in one placeAlexander Shiyan1-32/+24
2014-02-13serial: max310x: Remove IRQ validationAlexander Shiyan1-6/+0
2014-02-13serial: max310x: Add the loopback mode supportAlexander Shiyan1-7/+18
2014-02-13serial: max310x: Remove excess port configure at startupAlexander Shiyan1-6/+0
2014-02-13serial: max310x: Remove init() and exit() callbacksAlexander Shiyan1-7/+0
2014-02-13serial: max310x: Setup baud rate generator more preciselyAlexander Shiyan1-12/+20
2013-10-17tty: Remove unnecessary semicolonsJoe Perches1-1/+1
2013-07-29serial: max310x: Fix dev_pm_opsAlexander Shiyan1-5/+4
2013-07-27serial: max310x: Add MAX14830 supportAlexander Shiyan1-1/+44
2013-07-27serial: max310x: Add MAX3109 supportAlexander Shiyan1-4/+31
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 06:51:38 +0300