summaryrefslogtreecommitdiff
path: root/drivers/spi/atmel-quadspi.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controllerTudor Ambarus1-0/+3
commit 8c235cc25087495c4288d94f547e9d3061004991 upstream. Use the spi_mem_default_supports_op() core helper in order to take into account the buswidth specified by the user in device tree. Cc: <stable@vger.kernel.org> Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220406133604.455356-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18spi: Fixed division by zero warningYoshitaka Ikeda1-1/+1
[ Upstream commit 09134c5322df9f105d9ed324051872d5d0e162aa ] The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so there is no need for calculation. Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/OSZPR01MB70049C8F56ED8902852DF97B8BD49@OSZPR01MB7004.jpnprd01.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-11spi: atmel-quadspi: Disable the QSPI IP at suspend()Tudor Ambarus1-0/+1
It is safer to disable the QSPI IP at suspend, in order to avoid possible impact of glitches on the internal FSMs. This is a theoretical fix, there were no problems seen as of now. Tested on sama5d2 and sam9x60 versions of the IP. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210210135428.204134-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07Merge series "spi: atmel-quadspi: Fix AHB memory accesses" from Tudor ↵Mark Brown1-12/+13
Ambarus <tudor.ambarus@microchip.com>: Starting with the move of the atmel-quadspi driver under SPI, the following error could be seen when mounting a 16MByte ubifs: UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type 1/4 fixes AHB accesses. The rest of the patches are small optimizations. Tested on both sama5d2 and sam9x60. Tudor Ambarus (4): spi: atmel-quadspi: Fix AHB memory accesses spi: atmel-quadspi: Drop superfluous set of QSPI_IFR_APBTFRTYP_READ spi: atmel-quadspi: Write QSPI_IAR only when needed spi: atmel-quadspi: Move common code outside of if else drivers/spi/atmel-quadspi.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) -- 2.25.1 base-commit: 3650b228f83adda7e5ee532e2b90429c03f7b9ec _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-12-07spi: atmel-quadspi: Fix use-after-free on unbindLukas Wunner1-10/+5
atmel_qspi_remove() accesses the driver's private data after calling spi_unregister_controller() even though that function releases the last reference on the spi_controller and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound. Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v5.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v5.0+ Cc: Piotr Bugalski <bugalski.piotr@gmail.com> Link: https://lore.kernel.org/r/4b05c65cf6f1ea3251484fe9a00b4c65478a1ae3.1607286887.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: atmel-quadspi: Move common code outside of if elseTudor Ambarus1-2/+2
QSPI_IFR is set as the last QSPI Instruction Frame register regardless of the sama5d2 or sam9x60 version of the IP. Move the writing of QSPI_IFR outside of the IP specific code. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201207135959.154124-5-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: atmel-quadspi: Write QSPI_IAR only when neededTudor Ambarus1-4/+4
The address must be written in QSPI_IAR only when we have a instruction frame with address but no data. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201207135959.154124-4-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: atmel-quadspi: Drop superfluous set of QSPI_IFR_APBTFRTYP_READTudor Ambarus1-3/+0
That bit describes the APB transfer type. We are writing serial memory registers via AHB acesses, that bit does not make sense in the current context. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201207135959.154124-3-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: atmel-quadspi: Fix AHB memory accessesTudor Ambarus1-3/+7
Following error was seen when mounting a 16MByte ubifs: UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type QSPI_IFR.TFRTYP was not set correctly. When data transfer is enabled and one wants to access the serial memory through AHB in order to: - read in the serial memory, but not a memory data, for example a JEDEC-ID, QSPI_IFR.TFRTYP must be written to '0' (both sama5d2 and sam9x60). - read in the serial memory, and particularly a memory data, TFRTYP must be written to '1' (both sama5d2 and sam9x60). - write in the serial memory, but not a memory data, for example writing the configuration or the QSPI_SR, TFRTYP must be written to '2' for sama5d2 and to '0' for sam9x60. - write in the serial memory in particular to program a memory data, TFRTYP must be written to '3' for sama5d2 and to '1' for sam9x60. Fix the setting of the QSPI_IFR.TFRTYP field. Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Cc: <stable@vger.kernel.org> # v5.0+ Reported-by: Tom Burkart <tom@aussec.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201207135959.154124-2-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-10spi: atmel-quadspi: Disable clock in probe error pathLukas Wunner1-1/+1
If the call to of_device_get_match_data() fails on probe of the Atmel QuadSPI driver, the clock "aq->pclk" is erroneously not unprepared and disabled. Fix it. Fixes: 2e5c88887358 ("spi: atmel-quadspi: add support for sam9x60 qspi controller") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v5.1+ Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/8f8dc2815aa97b2378528f08f923bf81e19611f0.1604874488.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: atmel-quadspi: Use optimezed memcpy_fromio()/memcpy_toio()Tudor Ambarus1-4/+4
Optimezed mem*io operations are defined for LE platforms, use them. The ARM and !ARCH_EBSA110 dependencies for COMPILE_TEST were added only for the _memcpy_fromio()/_memcpy_toio() functions. Drop these dependencies. Tested unaligned accesses on both sama5d2 and sam9x60 QSPI controllers using SPI NOR flashes, everything works ok. The following performance improvement can be seen when running mtd_speedtest: sama5d2_xplained (mx25l25635e) - before: mtd_speedtest: eraseblock write speed is 983 KiB/s mtd_speedtest: eraseblock read speed is 6150 KiB/s - after: mtd_speedtest: eraseblock write speed is 1055 KiB/s mtd_speedtest: eraseblock read speed is 20144 KiB/s sam9x60ek (sst26vf064b) - before: mtd_speedtest: eraseblock write speed is 4770 KiB/s mtd_speedtest: eraseblock read speed is 8062 KiB/s - after: mtd_speedtest: eraseblock write speed is 4524 KiB/s mtd_speedtest: eraseblock read speed is 21186 KiB/s Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716043139.565734-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-14spi: atmel-quadspi: reject DTR opsPratyush Yadav1-0/+6
Double Transfer Rate (DTR) ops are added in spi-mem. But this controller doesn't support DTR transactions. Since we don't use the default supports_op(), which rejects all DTR ops, do that explicitly in our supports_op(). Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200623183030.26591-4-p.yadav@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-20spi: atmel-quadspi: Add verbose debug facilities to monitor register accessesTudor Ambarus1-22/+97
This feature should not be enabled in release but can be useful for developers who need to monitor register accesses at some specific places. Helped me identify a bug in u-boot, by comparing the register accesses from the linux driver with the ones from its u-boot variant. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200320065058.891221-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-28spi: atmel-quadspi: fix possible MMIO window size overrunTudor Ambarus1-0/+11
The QSPI controller memory space is limited to 128MB: 0x9000_00000-0x9800_00000/0XD000_0000--0XD800_0000. There are nor flashes that are bigger in size than the memory size supported by the controller: Micron MT25QL02G (256 MB). Check if the address exceeds the MMIO window size. An improvement would be to add support for regular SPI mode and fall back to it when the flash memories overrun the controller's memory space. Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200228155437.1558219-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02spi: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-1/+0
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-42-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02spi: atmel-quadspi: fix resume callTudor Ambarus1-3/+7
When waking up from the Suspend-to-RAM state, the following error was seen: m25p80 spi2.0: flash operation timed out The flash remained in an undefined state, returning 0xFFs. Fix it by setting the Serial Clock Baud Rate, as it was set before the conversion to SPIMEM. Tested with sama5d2_xplained and mx25l25673g spi-nor in Backup + Self-Refresh and Suspend modes. Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Reported-by: Mark Deneen <mdeneen@gmail.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02spi: atmel-quadspi: void return type for atmel_qspi_init()Tudor Ambarus1-7/+4
commit 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") removed the error path from atmel_qspi_init(), but not changed the function's return type. Set void return type for atmel_qspi_init(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02Merge branch 'spi-5.2' into spi-nextMark Brown1-1/+1
2019-05-02spi: atmel-quadspi: fix crash while suspendingClaudiu Beznea1-2/+4
atmel_qspi objects are kept in spi_controller objects, so, first get pointer to spi_controller object and then get atmel_qspi object from spi_controller object. Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-25spi: atmel-quadspi: Make atmel_qspi_get_name staticYueHaibing1-1/+1
Fix sparse warning: drivers/spi/atmel-quadspi.c:369:12: warning: symbol 'atmel_qspi_get_name' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: add support for sam9x60 qspi controllerTudor Ambarus1-35/+128
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register access, the other for the qspi core and phy. Both are mandatory. It uses different transfer type bits in IFR register. It has dedicated registers to specify a read or a write instruction: Read Instruction Code Register (RICR) and Write Instruction Code Register (WICR). ICR/RICR/WICR have identical fields. Tested with sst26vf064b jedec,spi-nor flash. Backward compatibility test done on sama5d2 qspi controller and mx25l25635e jedec,spi-nor flash. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: add support for named peripheral clockTudor Ambarus1-15/+18
Naming clocks is a good practice. Keep supporting unnamed peripheral clock, to be backward compatible with old DTs. While here, rename clk to pclk, to indicate that it is a peripheral clock. Suggested-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: rework transfer macrosTudor Ambarus1-9/+4
Split the TFRTYP_TRSFR_ bitfields in 2: one bit encoding the mem/reg transfer type and one bit encoding the direction of the transfer (read/write). Remove NOP when setting read transfer type. Remove useless setting of write transfer type when op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes. QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi, rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: switch to SPDX license identifiersTudor Ambarus1-12/+1
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: return appropriate error codeTudor Ambarus1-2/+2
Return -ENOTSUPP when atmel_qspi_find_mode() fails. Propagate the error in atmel_qspi_exec_op(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: remove unnecessary castTudor Ambarus1-1/+1
The cast is done implicitly. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: fix naming schemeTudor Ambarus1-8/+8
Let general names to core drivers. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: drop wrappers for iomem accessesTudor Ambarus1-28/+17
The wrappers hid that the accesses are relaxed. Drop them. Suggested-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: order header files inclusion alphabeticallyTudor Ambarus1-5/+4
Cosmetic change, no functional change. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06spi: atmel-quadspi: cache MR value to avoid a write accessTudor Ambarus1-1/+13
Set the controller by default in Serial Memory Mode (SMM) at probe. Cache Mode Register (MR) value to avoid write access when setting the controller in serial memory mode at exec_op(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-07spi: Add QuadSPI driver for Atmel SAMA5D2Piotr Bugalski1-0/+549
Kernel contains QSPI driver strongly tied to MTD and nor-flash memory. New spi-mem interface allows usage also other memory types, especially much larger NAND with SPI interface. This driver works as SPI controller and is not related to MTD, however can work with NAND-flash or other peripherals using spi-mem interface. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 05:19:02 +0300