summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21rtlwifi: rtl8188ee: use true,false for bool variablesJason Yan1-2/+2
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:70:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:72:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200418070236.9620-2-yanaijie@huawei.com
2020-01-26rtlwifi: rtl8188ee: Make functions static & rm sw.hAmadeusz Sławiński1-4/+3
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-24rtlwifi: remove assignment to itselfPing-Ke Shih1-4/+0
Module parameters of 'sw_crypto' and 'disable_watchdog' are false by default. If new value is desired, we can do it during inserting module, assignment existing in source code is not reasonable. Reported-by: David Binderman <dcb314@hotmail.com> CC: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: rtl8188ee: Replace old-style license informationLarry Finger1-24/+2
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove dummy hal_op rx_command_packet from rtl8188ee and rtl8723aePing-Ke Shih1-2/+0
The caller of hal_op rx_command_packet will assert function pointer before calling, so we can remove dummy functions safely. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27rtlwifi: Convert timers to use timer_setup()Kees Cook1-8/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Add module parameter ASPMPing-Ke Shih1-1/+5
On some platforms, enable ASPM will cause AER error to be logged, thus we use a parameter to selectively turn on ASPM. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8188ee: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 3090 912 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o File size After adding 'const': text data bss dec hex filename 3154 848 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Fix memory leak when firmware request failsSouptick Joarder1-0/+2
This patch will fix memory leak when firmware request fails Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Add TX report and disable key to force wait until report acked.Ping-Ke Shih1-1/+1
When using EAPOL to do a PTK rekey, there is a possible race condition. When msg 3/4 is received, the supplicant will send msg 4/4 and install the new key immediately; however, the driver must make sure that msg 4/4 is sent before installing the new key. We use TX report to ensure it is sent. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtlwifi: Convert COMP_XX entries into a proper debugging maskLarry Finger1-5/+6
The debugging macros contain a parameter COMP_XX that could be used as a mask; however, the code turns all these various bits on at the same time. This change implements them as a proper mask, and adds module parameters to set the mask at load time. The current name "debug" for the debug level has been changed to "debug_level" to better differentiate it from "debug_mask". The debug routines have also been changed to interrogate the structure that is loaded at entry time. As a result, the structure rtl_debug is no longer needed, and all references to it are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: rtl8188ee: Remove all instances of DBG_EMERGLarry Finger1-5/+3
This is a step toward eliminating the RT_TRACE macros. Those calls that have DBG_EMERG as the level are always logged, and they represent error conditions, thus they are replaced with pr_err(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-10-13rtlwifi: Fix regression caused by commit d86e64768859Larry Finger1-4/+4
In commit d86e64768859 ("rtlwifi: rtl818x: constify local structures"), the configuration struct for most of the drivers was changed to be constant. The problem is that five of the modified drivers need to be able to update the firmware name based on the exact model of the card. As the file names were stored in one of the members of that struct, these drivers would fail with a kernel BUG splat when they tried to update the firmware name. Rather than reverting the previous commit, I used a suggestion by Johannes Berg and made the firmware file name pointers be local to the routines that update the software variables. The configuration struct of rtl8192cu, which was not touched in the previous patch, is now constantfied. Fixes: d86e64768859 ("rtlwifi: rtl818x: constify local structures") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.8 Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-14rtlwifi: rtl818x: constify local structuresJulia Lawall1-1/+1
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8188ee: Fix module parameter initializationLarry Finger1-2/+5
In this driver, parameters disable_watchdog and sw_crypto are never copied into the locations used in the main code. While modifying the parameter handling, the copying of parameter msi_support is moved to be with the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger1-0/+419
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-03 01:00:12 +0300