summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-19mt76: mt7915: read all eeprom fields from fw in efuse modeShayne Chen1-24/+20
If efuse mode is used, read all values from fw during eeprom init, which makes it more convinient to check if rf values in efuse are properly burned. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: do not read rf value from efuse in flash modeShayne Chen1-1/+1
Do not read rf value from efuse when driver is configured to use flash mode. Tested-by: Bruce Chuang <bruce-ss.chuang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen1-110/+28
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee1-3/+22
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix txpower init for TSSI off chipsShayne Chen1-6/+13
Fix incorrect txpower init value for TSSI off chips which causes too small txpower. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-27mt76: mt7915: fix eeprom DBDC band selectionFelix Fietkau1-2/+5
When the EEPROM band fields contain default values, assign 2.4 GHz to the first band and 5 GHz to the second. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-27mt76: mt7915: fix eeprom parsing for DBDCFelix Fietkau1-12/+16
Annotate WIFI_CONF eeprom mask values with the byte number Fix parsing per-band number of chains Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move chainmask in mt76_phyLorenzo Bianconi1-1/+1
Move chainmask from driver phy to mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add support for flash modeShayne Chen1-1/+4
Add support for getting rf values from flash. This is used for some test purposes and products. If the mtd partition is configured in dts, driver will read from flash to init eeprom command; if not, still init it with efuse's values. An example: &slot0 { mt7915@0,0 { reg = <0x0000 0 0 0 0>; device_type = "pci"; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: introduce dbdc supportLorenzo Bianconi1-16/+31
Introduce mt7915 dbdc support. If dbdc is available, mt7915 primary phy will work on 2.4GHz band, while secondary one on 5GHz band. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi1-2/+2
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move band capabilities in mt76_phyLorenzo Bianconi1-4/+4
This is a preliminary patch to move properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: rely on eeprom definitionsLorenzo Bianconi1-2/+2
In order to make the code more readable, rely on mt7915_eeprom_field definitions for eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: make mt7915_eeprom_read staticLorenzo Bianconi1-7/+2
Make mt7915_eeprom_read routine static since it is used only in eeprom.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: implement HE per-rate tx power supportRyder Lee1-0/+118
Use firmware support for applying per-rate limit and power offsets. This can support all HE RU types. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add mac80211 driver for MT7915 PCIe-based chipsetsRyder Lee1-0/+125
Add support for the MediaTek latest generation IEEE 802.11ax 4x4 device MT7915E, which supports concurrent dual-band operation at both 5GHz and 2.4GHz. Note that this patch just add basic part and will add more HE capabilities support in the further patches. The driver supports AP, Station, Mesh and monitor mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 17:15:28 +0300