summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom/brcm80211/brcmfmac
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ] Fix: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): ^~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: netdev@vger.kernel.org Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08brcmfmac: pcie: Fix crashes due to early IRQsHector Martin1-3/+13
commit b50255c83b914defd61a57fbc81d452334b63f4c upstream. The driver was enabling IRQs before the message processing was initialized. This could cause IRQs to come in too early and crash the driver. Instead, move the IRQ enable and hostready to a bus preinit function, at which point everything is properly initialized. Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toioHector Martin1-44/+4
commit 9466987f246758eb7e9071ae58005253f631271e upstream. The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise. We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway. Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Declare missing firmware files in pcie.cHector Martin2-1/+7
commit 6d766d8cb505ec1fae63da8faef4fc5712c3d794 upstream. Move one of the declarations from sdio.c to pcie.c, since it makes no sense in the former (SDIO support is optional), and add missing ones. Fixes: 75729e110e68 ("brcmfmac: expose firmware config files through modinfo") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-5-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error pathHector Martin1-0/+2
commit 5e90f0f3ead014867dade7a22f93958119f5efab upstream. This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path. Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: firmware: Allocate space for default boardrev in nvramHector Martin1-0/+2
commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream. If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer. Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23brcmfmac: firmware: Fix crash in brcm_alt_fw_pathPhil Elwell1-2/+4
commit 665408f4c3a5c83e712871daa062721624b2b79e upstream. The call to brcm_alt_fw_path in brcmf_fw_get_firmwares is not protected by a check to the validity of the fwctx->req->board_type pointer. This results in a crash in strlcat when, for example, the WLAN chip is found in a USB dongle. Prevent the crash by adding the necessary check. See: https://github.com/raspberrypi/linux/issues/4833 Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220118154514.3245524-1-phil@raspberrypi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18brcmfmac: Add DMI nvram filename quirk for Cyberbook T116 tabletHans de Goede1-0/+10
[ Upstream commit 49c3eb3036e6359c5c20fe76c611a2c0e0d4710e ] The Cyberbook T116 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: "brcmfmac43455-sdio.Default string-Default string.txt" as nvram file which is way too generic. The nvram file shipped on the factory Android image contains the exact same settings as those used on the AcePC T8 mini PC, so point the new DMI nvram filename quirk to the acepc-t8 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210928160633.96928-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-28Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback"Soeren Moch1-11/+6
This reverts commit b0b524f079a23e440dd22b04e369368dde847533. Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev as fallback") changes country setup to directly use ISO3166 country codes if no more specific code is configured. This was done under the assumption that brcmfmac firmwares can handle such simple direct mapping from country codes to firmware ccode values. Unfortunately this is not true for all chipset/firmware combinations. E.g. BCM4359/9 devices stop working as access point with this change, so revert the offending commit to avoid the regression. Signed-off-by: Soeren Moch <smoch@web.de> Cc: stable@vger.kernel.org # 5.14.x Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210926201905.211605-1-smoch@web.de
2021-08-29brcmfmac: pcie: fix oops on failure to resume and reprobeAhmad Fatoum1-1/+1
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
2021-08-29brcmfmac: Add WPA3 Personal with FT to supported cipher suitesPaweł Drewniak1-0/+8
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal). Signed-off-by: Paweł Drewniak <czajernia@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824221330.3847139-1-czajernia@gmail.com
2021-08-21brcmfmac: add 43752 SDIO ids and initializationAngus Ainslie3-2/+10
Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca
2021-08-21brcmfmac: Set SDIO workqueue as WQ_HIGHPRISean Anderson1-1/+1
This puts tasks submitted to the SDIO workqueue at the head of the queue and runs them immediately. This gets higher RX throughput with the SDIO bus. This was originally submitted as [1]. The original author Wright Feng reports > throughput result with 43455(11ac) on 1 core 1.6 Ghz platform is > Without WQ_HIGGPRI TX/RX: 293/301 (mbps) > With WQ_HIGHPRI TX/RX: 293/321 (mbps) I tested this with a 43364(11bgn) on a 1 core 800 MHz platform and got Without WQ_HIGHPRI TX/RX: 16/19 (Mbits/sec) With WQ_HIGHPRI TX/RX: 24/20 (MBits/sec) [1] https://lore.kernel.org/linux-wireless/1584604406-15452-4-git-send-email-wright.feng@cypress.com/ Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210802170904.3116223-1-sean.anderson@seco.com
2021-08-21brcmfmac: use separate firmware for 43430 revision 2Mikhail Rudenko1-2/+3
A separate firmware is needed for Broadcom 43430 revision 2. This chip can be found in e.g. certain revisions of Ampak AP6212 wireless IC. Original firmware file from IC vendor is named 'fw_bcm43436b0.bin', but brcmfmac and also btbcm drivers report chip id 43430, so requested firmware file name is 'brcmfmac43430b0-sdio.bin' in line with other 43430 revisions. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804231308.576071-1-mike.rudenko@gmail.com
2021-08-21brcmfmac: support chipsets with different core enumeration spaceArend van Spriel5-11/+28
Historically the broadcom wifi chipsets always had enumeration space containing all core information at same place. However, for new chipsets the ASIC developers moved away from that given fact. So we have to accommodate that it can differ per chipset. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-5-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: add xtlv support to firmware interface layerArend van Spriel5-6/+244
Newer firmware API require commands to use xtlv format. Add support for that in the firmware interface layer. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-4-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: increase core revision column aligning core listArend van Spriel1-1/+1
Some cores are getting a revision greater that 99 thus messing up the column alignment in the list of cores. So adding a digit for the core revision. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-3-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: use different error value for invalid ram base addressArend van Spriel1-3/+5
The function brcmf_chip_tcm_rambase() returns 0 as invalid ram base address. However, upcoming chips have ram base address starting at zero so we have to find a more appropriate invalid value to return. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-2-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: firmware: Fix firmware loadingLinus Walleij2-6/+21
The patch that would first try the board-specific firmware had a bug because the fallback would not be called: the asynchronous interface is used meaning request_firmware_nowait() returns 0 immediately. Harden the firmware loading like this: - If we cannot build an alt_path (like if no board_type is specified) just request the first firmware without any suffix, like in the past. - If the lookup of a board specific firmware fails, we get a NULL fw in the async callback, so just try again without the alt_path from a dedicated brcm_fw_request_done_alt_path callback. - Drop the unnecessary prototype of brcm_fw_request_done. - Added MODULE_FIRMWARE match for per-board SDIO bins, making userspace tools to pull all the relevant firmware files. Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries") Cc: Stefan Hansson <newbyte@disroot.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210808180510.8753-1-digetx@gmail.com
2021-08-01brcmfmac: firmware: Allow per-board firmware binariesLinus Walleij1-11/+42
After some crashes in the 3D engine (!) on the Samsung GT-I8530 it turns out that the main firmware file can be device dependent, something that was previously only handled for the NVRAM parameter file. Rewrite the code a bit so we can a per-board suffixed firmware binary as well, if this does not exist we fall back to the canonical firmware name. Example: a 4330 device with the OF board compatible is "samsung,gavini". We will first try "brcmfmac4330-sdio.samsung,gavini.bin" then "brcmfmac4330-sdio.bin" if that does not work. Cc: phone-devel@vger.kernel.org Cc: newbyte@disroot.org Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210711231659.255479-1-linus.walleij@linaro.org
2021-06-24brcmfmac: support parse country code map from DTShawn Guo1-2/+55
With any regulatory domain requests coming from either user space or 802.11 IE (Information Element), the country is coded in ISO3166 standard. It needs to be translated to firmware country code and revision with the mapping info in settings->country_codes table. Support populate country_codes table by parsing the mapping from DT. The BRCMF_BUSTYPE_SDIO bus_type check gets separated from general DT validation, so that country code can be handled as general part rather than SDIO bus specific one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210417075428.2671-1-shawn.guo@linaro.org
2021-06-23brcmfmac: Silence error messages about unsupported firmware featuresDmitry Osipenko3-6/+25
KMSG is flooded with error messages about unsupported firmware features of BCM4329 chip. The GET_ASSOCLIST error became especially noisy with a newer NetworkManager version of Ubuntu 21.04. Turn the noisy error messages into info messages and print them out only once. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511211549.30571-2-digetx@gmail.com
2021-06-15brcmfmac: Add clm_blob firmware files to modinfoMatthias Brugger3-8/+15
Cypress Wi-Fi chipsets include information regarding regulatory constraints. These are provided to the driver through "Country Local Matrix" (CLM) blobs. Files present in Linux firmware repository are on a generic world-wide safe version with conservative power settings which is designed to comply with regulatory but may not provide best performance on all boards. Never the less, a better functionality can be expected with the file present, so add it to the modinfo of the driver. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210607103433.21022-1-matthias.bgg@kernel.org
2021-06-15brcmfmac: Delete second brcm folder hierarchyMatthias Brugger1-2/+2
BRCMF_FW_DEFAULT_PATH already defines the brcm folder, delete the second folder to match with Linux firmware repository layout. Fixes: 75729e110e68 ("brcmfmac: expose firmware config files through modinfo") Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210602144305.4481-1-matthias.bgg@kernel.org
2021-06-15brcmfmac: Fix a double-free in brcmf_sdio_bus_resetTong Tiangen1-1/+0
brcmf_sdiod_remove has been called inside brcmf_sdiod_probe when fails, so there's no need to call another one. Otherwise, sdiodev->freezer would be double freed. Fixes: 7836102a750a ("brcmfmac: reset SDIO bus on a firmware crash") Signed-off-by: Tong Tiangen <tongtiangen@huawei.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210601100128.69561-1-tongtiangen@huawei.com
2021-06-15brcmfmac: Demote non-compliant kernel-doc headersYang Shen2-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:2040: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1295: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517050141.61488-5-shenyang39@huawei.com
2021-06-15brcmfmac: correctly report average RSSI in station infoAlvin Šipraga1-16/+20
The rx_lastpkt_rssi field provided by the firmware is suitable for NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an average. Fix up the assignments and set the correct STA_INFO bits. This lets userspace know that the average RSSI is part of the station info. Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk
2021-06-15brcmfmac: fix setting of station info chains bitmaskAlvin Šipraga1-2/+1
The sinfo->chains field is a bitmask for filled values in chain_signal and chain_signal_avg, not a count. Treat it as such so that the driver can properly report per-chain RSSI information. Before (MIMO mode): $ iw dev wlan0 station dump ... signal: -51 [-51] dBm After (MIMO mode): $ iw dev wlan0 station dump ... signal: -53 [-53, -54] dBm Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210506132010.3964484-1-alsi@bang-olufsen.dk
2021-06-15brcmfmac: use ISO3166 country code and 0 rev as fallbackShawn Guo1-6/+11
Instead of aborting country code setup in firmware, use ISO3166 country code and 0 rev as fallback, when country_codes mapping table is not configured. This fallback saves the country_codes table setup for recent brcmfmac chipsets/firmwares, which just use ISO3166 code and require no revision number. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210425110200.3050-1-shawn.guo@linaro.org
2021-05-13brcmfmac: properly check for bus register errorsGreg Kroah-Hartman6-46/+41
The brcmfmac driver ignores any errors on initialization with the different busses by deferring the initialization to a workqueue and ignoring all possible errors that might happen. Fix up all of this by only allowing the module to load if all bus registering worked properly. Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13Revert "brcmfmac: add a check for the status of usb_register"Greg Kroah-Hartman1-5/+1
This reverts commit 42daad3343be4a4e1ee03e30a5f5cc731dadfef5. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The original commit here did nothing to actually help if usb_register() failed, so it gives a "false sense of security" when there is none. The correct solution is to correctly unwind from this error. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-69-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22brcmfmac: Avoid GFP_ATOMIC when GFP_KERNEL is enoughChristophe JAILLET1-1/+1
A workqueue is not atomic, so constraints can be relaxed here. GFP_KERNEL can be used instead of GFP_ATOMIC. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b6e619415db4ee5de95389280d7195bb56e45f77.1618860716.git.christophe.jaillet@wanadoo.fr
2021-04-18brcmfmac: Remove duplicate struct declarationWan Jiabing1-1/+0
struct brcmf_bus is declared twice. One has been declared at 37th line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210331023557.2804128-2-wanjiabing@vivo.com
2021-04-18brcmfmac: A typo fixBhaskar Chowdhury1-1/+1
s/revsion/revision/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210323043657.1466296-1-unixbhaskar@gmail.com
2021-03-23brcmfmac: p2p: Fix recently introduced deadlock issueHans de Goede1-1/+1
Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") replaced the rtnl_lock parameter passed to various brcmf functions with just lock, because since that commit it is not just about the rtnl_lock but also about the wiphy_lock . During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c was accidentally replaced with "if (locked)", dropping the inversion of the check. This causes the code to now call rtnl_lock() while already holding the lock, causing a deadlock. Add back the "!" to the if-condition to fix this. Cc: Johannes Berg <johannes.berg@intel.com> Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com
2021-02-09brcmfmac: add support for CQM RSSI notificationsAlvin Šipraga3-0/+121
Add support for CQM RSSI measurement reporting and advertise the NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace supplicant such as iwd to be notified of changes in the RSSI for roaming and signal monitoring purposes. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210208125738.3546557-1-alsi@bang-olufsen.dk
2021-02-08brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tabletHans de Goede1-0/+18
The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet. While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com
2021-02-08brcmfmac: Add DMI nvram filename quirk for Predia Basic tabletHans de Goede1-0/+14
The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com
2021-02-06Merge tag 'wireless-drivers-next-2021-02-05' of ↵Jakub Kicinski4-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg3-16/+20
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg1-3/+3
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-14brcmfmac: clear EAP/association status bits on linkdown eventsLuca Pesce1-2/+5
This ensure that previous association attempts do not leave stale statuses on subsequent attempts. This fixes the WARN_ON(!cr->bss)) from __cfg80211_connect_result() when connecting to an AP after a previous connection failure (e.g. where EAP fails due to incorrect psk but association succeeded). In some scenarios, indeed, brcmf_is_linkup() was reporting a link up event too early due to stale BRCMF_VIF_STATUS_ASSOC_SUCCESS bit, thus reporting to cfg80211 a connection result with a zeroed bssid (vif->profile.bssid is still empty), causing the WARN_ON due to the call to cfg80211_get_bss() with the empty bssid. Signed-off-by: Luca Pesce <luca.pesce@vimar.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608807119-21785-1-git-send-email-luca.pesce@vimar.com
2021-01-14brcmfmac: Delete useless kfree codeZheng Yongjun1-6/+4
A null pointer will be passed to a kfree() call after a kzalloc() call failed. This code is useless. Thus delete the extra function call. A goto statement is also no longer needed. Thus adjust an if branch. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201222135113.20680-1-zhengyongjun3@huawei.com
2021-01-14brcmfmac: support BCM4365E with 43666 ChipCommon chip IDRafał Miłecki2-0/+2
This adds support for the BCM43666/4 which seems to be using the same firmware as BCM4366 (4366c0). I found it in the Netgear R8000P router. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214101553.32097-1-zajec5@gmail.com
2020-12-07brcmfmac: remove redundant assignment to pointer 'entry'Colin Ian King1-1/+1
The pointer 'entry' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201204180459.1148257-1-colin.king@canonical.com
2020-12-02brcmfmac: expose firmware config files through modinfoMatthias Brugger1-0/+4
Apart from a firmware binary the chip needs a config file used by the FW. Add the config files to modinfo so that they can be read by userspace. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201124120018.31358-1-matthias.bgg@kernel.org
2020-11-24brcmfmac: Fix incorrect type in assignmentRemi Depommier1-8/+9
The left-hand side of the assignment from cpu_to_le32() should be of type __le32. This commit clears the warning reported by sparse when building with C=1 CF="-D__CHECK_ENDIAN__". Fixes: d56fd83cf99c ("brcmfmac: fix SDIO access for big-endian host") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Remi Depommier <rde@setrix.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201116001639.31958-1-rde@setrix.com
2020-11-24brcmfmac: fix error return code in brcmf_cfg80211_connect()Zhang Changzhong1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3b1e0a7bdfee ("brcmfmac: add support for SAE authentication offload") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605248896-16812-1-git-send-email-zhangchangzhong@huawei.com
2020-11-07brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}Seung-Woo Kim2-2/+5
There are missig brcmf_free() for brcmf_alloc(). Fix memory leak by adding missed brcmf_free(). Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Fixes: a1f5aac1765a ("brcmfmac: don't realloc wiphy during PCIe reset") Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603849967-22817-1-git-send-email-sw0312.kim@samsung.com
2020-11-07brcmfmac: fweh: Add missing description for 'gfp'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:394: warning: Function parameter or member 'gfp' not described in 'brcmf_fweh_process_event' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-19-lee.jones@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 09:04:55 +0300