summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2011-04-13ath9k_htc: Rename firmwareSujith Manoharan1-2/+2
Since the new FW requires backward incompatible host driver changes, rename the FW to allow older driver versions to work with the older FW. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Remove AR7010 v1.0 supportSujith Manoharan1-6/+1
All the AR7010 devices supoprted by ath9k_htc are based on version v1.1, so remove support for v1.0. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: introduce ATH9K_{PCI,AHB} config optionsGabor Juhos3-5/+24
Currently ath9k only available in menuconfig if PCI bus support is enabled. However the driver is required for the built-in wireless MACs of the Atheros AR9130/AR9132 SoCs. These SoCs have no PCI controller, the wireless MAC is connected to the AHB bus on them. Introduce separated config options for the supported buses, in order to allow building of ath9h without PCI bus support. As a bonus, this patch removes the cross-reference of the ATHEROS_AR71XX option which is not present in the kernel. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: improve comments for optimized tx descriptor setupJohn W. Linville1-1/+6
Comment the use of local variables to reduce the number of load/store operations on uncached memory, in hopes of not losing this optimization accidentally in the future. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Register id table for platform deviceVasanthakumar Thiagarajan1-1/+13
Currently the device id in the platform driver is hardcoded to an id which is specific to AR9130/AR9132 SOCs as it supports only wmac (wireless mac) of these SOCs. But this needs to be dynamic when we want to support different wmac of SOCs. So add id_table to driver to make it extendable to more SOCs. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Acked-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_hw: update AR9003 low_ob_db_tx_gain to improve spur performanceRajkumar Manoharan1-50/+50
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_hw: update Ar9003 intervals to fix carrier leakRajkumar Manoharan1-48/+48
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_hw: Remove unused code in AR9287 eepromRajkumar Manoharan1-24/+1
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Implement integer mode for AR9485Vasanthakumar Thiagarajan4-25/+67
This fixes random disconnect. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: index out of boundsroel1-2/+1
Check whether index is within bounds before testing the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_hw: index out of boundsroel1-1/+1
Check whether index is within bounds before testing the element Both spurChans arrays in modalHeader5G and modalHeader2G have 5 elements, AR_EEPROM_MODAL_SPURS is defined 5. So unless a break occurs, in the last iteration (i=5) we tried to access spurChansPtr[5] before testing whether i was within bounds. Fix this. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: reduce interrupt load caused by rx/tx interruptsFelix Fietkau3-3/+59
While the rx/tx tasklet is pending, new unnecessary interrupts may arrive. Decrease the load by temporarily disabling the interrupts until the tasklet has completed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: clean up debugfs codeFelix Fietkau3-64/+19
The pointers to the debugfs entries do not need to be saved, because they will be recursively removed when the wiphy is unregistered. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: remove ts_retry from ath5k_tx_statusFelix Fietkau3-35/+13
Reusing the configured retry counts from the skb cb is more efficient than reloading the data from uncached memory. Replace ts_longretry (unused) with ts_final_retry which contains the retry count for the final rate only Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: optimize rx status processingFelix Fietkau1-23/+18
Use ACCESS_ONCE to reduce the number of redundant loads on uncached memory Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: optimize tx status processingFelix Fietkau1-16/+21
Use ACCESS_ONCE to reduce the number of variable reloads on uncached memory Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: remove ts_rate from ath5k_tx_statusFelix Fietkau2-14/+0
It is no longer necessary for preparing mac80211 tx status Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: optimize tx descriptor setupFelix Fietkau1-18/+20
Use local variables to reduce the number of load/store operations on uncached memory. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: fix slot time handlingFelix Fietkau3-2/+12
Set the slot time based on the mac80211 short slot vs long slot setting instead of just forcing long slot for all CCK-enabled channels. This slightly improves 802.11g mode performance in in my tests. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: fix SIFS time handlingFelix Fietkau2-3/+2
ath5k uses 8 usec as a sifs time, extracted from the initvals, whereas the standard requires a sifs time of 10. The difference originates from the fact that the SIFS register has an offset of 2 usec. Fix the SIFS time definition to use the standard value of 10 usec and subtract 2 usecs when writing the SIFS register. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: fix short preamble rate duration valueFelix Fietkau3-21/+14
Subtract the difference in preamble duration (in usec) from the value returned by ieee80211_generic_frame_duration. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: fix tx status reporting issuesFelix Fietkau1-10/+6
During normal operation, minstrel was showing suspicious EWMA probabilities exceeding 100%. It looks like the tx status reporting in ath5k was not properly clearing the rate index for rates which were never attempted. This is caused by uninitialized stale data in the on-stack tx status information, which is reused when more frames are received. To fix this, rely on ts->ts_final_idx to select the last attempted rate, instead of checking whether ts->ts_rate is set. Additionally, the conversion from the driver rate index back to the mac80211 rate index can be dropped, as the mac80211 tx status will still have the original rate index which was used to set up the descriptor. Additionally, one more inaccuracy was fixed - the final rate attempt count only needs to be increased by one if the transmission attempt was successful. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: improve pcal error handling for ENOMEM caseJohn W. Linville1-59/+70
The ath5k driver does kmalloc allocations for pcal info in a loop. But, if one fails it was simply returning -ENOMEM without freeing already allocated memory. This patch corrects that oversight. Reported-by: Eugene A. Shatokhin <dame_eugene@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Bob Copeland <me@bobcopeland.com>
2011-04-13ath9k_hw: remove unnecessary parts of the AR9380 SREV checkFelix Fietkau1-3/+1
Older versions have not been sold and the driver does not explicitly check for them anyway, so we can simply ignore the macRev here. Reduces ath9k_hw size on mips by more than 2 KB. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Fix kernel panic on module unloadRajkumar Manoharan2-0/+4
The commit "ath9k: configure beacons based on hw opmode" introduced a regression which leads to kernel panic. Failed to stop ani timer during the driver unload while any of the beaconing vif is running. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Update gain table for AR9485Senthil Balasubramanian1-5/+5
Update Tx gain 23 for all tx gain table. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Add RSSI information from control and extension chainsSenthil Balasubramanian2-1/+46
Export RSSI information from all the control and extension channel chains to debugfs. Also add rx antenna information to debugfs. This will be useful for debugging purpose. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: fix too early enabling of rx during ath_startrecv()Felix Fietkau1-1/+1
rx should only be enabled after enough rx buffers have been given to the hardware, however ath_rx_buf_link was calling ath9k_hw_rxena after every single added buffer. Fix this by calling ath9k_hw_rxena directly from the rx tasklet after completion instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: fix PS-Poll reception on AR9160 and earlierFelix Fietkau1-3/+1
I can't find any valid reason for not setting the ATH9K_RX_FILTER_PSPOLL flag on older hardware and neither the documentation nor the reference code mention any reason for excluding older hardware here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_hw: Fix instable target power control b/w CCK/OFDMRajkumar Manoharan3-1/+37
The problem is that when the attenuation is increased, the rate will start to drop from MCS7 -> MCS6, and finally will see MCS1 -> CCK_11Mbps. When the rate is changed b/w CCK and OFDM, it will use register desired_scale to calculate how much tx gain need to change. The output power with the same tx gain for CCK and OFDM modulated signals are different. This difference is constant for AR9280 but not AR9285/AR9271. It has different PA architecture a constant. So it should be calibrated against this PA characteristic. The driver has to read the calibrated values from EEPROM and set the tx power registers accordingly. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: Implement dev_tx_frames_pending callback.Vivek Natarajan1-0/+16
This function returns true if there is atleast one frame in any one of the tx queues. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-08Merge branch 'master' of ↵John W. Linville6-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/rtlwifi/efuse.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c net/bluetooth/mgmt.c
2011-04-07ath9k: configure beacons based on hw opmodeRajkumar Manoharan4-83/+103
Current ath9k code does not handle beacon timers on opmode specific. One such example is that a STA beacon config overwrites already configured AP vif's beacon timers during scan. On multi station vif case, configure beacon timers beased on primary vif selected. This also helps while moving back to single STA vif from multi STA vifs, where the power save is enabled and hw has to be reconfigured with proper beacon and bssid/aid. Otherwise connection poll will be triggered so frequently due to beacon loss. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Handle BSSID/AID for multiple interfacesRajkumar Manoharan2-10/+63
As of now bssid/aid is overridden with recently changed vif's bss config. This may cause improper beacon updation due to bssid/aid mismatch. On station mode, select an associated sta vif as primary vif and configure that vif's bss into hw. Update the primary vif on interface change and bss info change. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Cleanup ath_vif structRajkumar Manoharan3-8/+1
Remove unused bssid from ath_vif and set av_bslot on beacon alloc/return. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: deny new interface addtion on IBSS modeRajkumar Manoharan1-2/+3
The present check denies the IBSS interface addtion if we already have any other vifs. But it fails to deny interface addition if IBSS was already present. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: use the hw opmode to select the beacon timer modeFelix Fietkau1-1/+1
Since the beacon timers are global, the individual vif type should not be used to determine the beacon timer configuration mode, use the global opmode instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: fix beacon slot processing in ad-hoc modeFelix Fietkau1-8/+0
The recent cleanups in the beacon code fixed SWBA backoff calculation, however it did not remove a line of code that worked around the issues from the earlier version of the code. After the cleanup, the initial TSF based slot calculation now always returns 0 instead of ATH_BCBUF-1, so the previous hack that reversed the slot order needs to be removed, as ad-hoc mode does not use staggered beacons. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ar9170usb: purge obsolete driverChristian Lamparter15-6810/+0
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath: add missing regdomain pair 0x5c mappingChristian Lamparter1-0/+1
Joe Culler reported a problem with his AR9170 device: > ath: EEPROM regdomain: 0x5c > ath: EEPROM indicates we should expect a direct regpair map > ath: invalid regulatory domain/country code 0x5c > ath: Invalid EEPROM contents It turned out that the regdomain 'APL7_FCCA' was not mapped yet. According to Luis R. Rodriguez [Atheros' engineer] APL7 maps to FCC_CTL and FCCA maps to FCC_CTL as well, so the attached patch should be correct. Cc: <stable@kernel.org> Reported-by: Joe Culler <joe.culler@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k_hw: Use appropriate rx gain table for AR9485Vasanthakumar Thiagarajan1-4/+4
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k_hw: remove ath9k_get_channel_edgesMohammed Shafi Shajakhan2-28/+0
This function is nowhere used. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k: remove set11n_virtualmorefragMohammed Shafi Shajakhan4-32/+0
This does not seems to be used anywhere so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k: cleanup few redundant macrosMohammed Shafi Shajakhan3-7/+1
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ath9k: Fix phy info print message with AR9485 chipset.Senthil Balasubramanian1-0/+1
The phy information print during driver init time doesn't show the numeric part of the chip name properly for AR9485. This patch addresses this issue by adding the string to the respective array. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->tx_triglevel_maxFelix Fietkau3-7/+1
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ATH9K_HW_CAP_ENHANCEDPMFelix Fietkau2-3/+0
It is not used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->keycache_sizeFelix Fietkau4-21/+2
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->reg_capFelix Fietkau2-18/+0
It is not used anywhere and seems pointless Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ah->config.ht_enableFelix Fietkau2-7/+1
It is only used in one place, and the device id check that it's based on can be moved there as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 00:44:34 +0300