summaryrefslogtreecommitdiff
path: root/drivers/net/mdio
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27Merge tag 'v5.15.35' into dev-5.15Joel Stanley1-0/+5
This is the 5.15.35 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-20net: mdio: don't defer probe forever if PHY IRQ provider is missingVladimir Oltean1-0/+5
[ Upstream commit 74befa447e6839cdd90ed541159ec783726946f9 ] When a driver for an interrupt controller is missing, of_irq_get() returns -EPROBE_DEFER ad infinitum, causing fwnode_mdiobus_phy_device_register(), and ultimately, the entire of_mdiobus_register() call, to fail. In turn, any phy_connect() call towards a PHY on this MDIO bus will also fail. This is not what is expected to happen, because the PHY library falls back to poll mode when of_irq_get() returns a hard error code, and the MDIO bus, PHY and attached Ethernet controller work fine, albeit suboptimally, when the PHY library polls for link status. However, -EPROBE_DEFER has special handling given the assumption that at some point probe deferral will stop, and the driver for the supplier will kick in and create the IRQ domain. Reasons for which the interrupt controller may be missing: - It is not yet written. This may happen if a more recent DT blob (with an interrupt-parent for the PHY) is used to boot an old kernel where the driver didn't exist, and that kernel worked with the vintage-correct DT blob using poll mode. - It is compiled out. Behavior is the same as above. - It is compiled as a module. The kernel will wait for a number of seconds specified in the "deferred_probe_timeout" boot parameter for user space to load the required module. The current default is 0, which times out at the end of initcalls. It is possible that this might cause regressions unless users adjust this boot parameter. The proposed solution is to use the driver_deferred_probe_check_state() helper function provided by the driver core, which gives up after some -EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration. The return code is changed from -EPROBE_DEFER into -ENODEV or -ETIMEDOUT, depending on whether the kernel is compiled with support for modules or not. Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220407165538.4084809-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-19net: mdio: add reset control for Aspeed MDIODylan Hung1-1/+14
Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO controllers embedded in Aspeed AST2600 SOC and share one reset control register SCU50[3]. To work with old DT blobs which don't have the reset property, devm_reset_control_get_optional_shared is used in this change. OpenBMC-Staging-Count: 1 Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220418014059.3054-3-dylan_hung@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-14Merge tag 'v5.15.34' into dev-5.15Joel Stanley1-0/+6
This is the 5.15.34 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-13net: phy: mscc-miim: reject clause 45 register accessesMichael Walle1-0/+6
[ Upstream commit 8d90991e5bf7fdb9f264f5f579d18969913054b7 ] The driver doesn't support clause 45 register access yet, but doesn't check if the access is a c45 one either. This leads to spurious register reads and writes. Add the check. Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-07net: mdio: aspeed: Add c45 supportPotin Lai1-5/+32
Add Clause 45 support for Aspeed mdio driver. OpenBMC-Staging-Count: 1 Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220407011738.7189-4-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-07net: mdio: aspeed: Introduce read write function for c22 and c45Potin Lai1-12/+34
Add following additional functions to move out the implementation from aspeed_mdio_read() and aspeed_mdio_write(). c22: - aspeed_mdio_read_c22() - aspeed_mdio_write_c22() c45: - aspeed_mdio_read_c45() - aspeed_mdio_write_c45() OpenBMC-Staging-Count: 1 Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220407011738.7189-3-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-07net: mdio: aspeed: move reg accessing part into separate functionsPotin Lai1-32/+38
Add aspeed_mdio_op() and aseed_mdio_get_data() for register accessing. aspeed_mdio_op() handles operations, write command to control register, then check and wait operations is finished (bit 31 is cleared). aseed_mdio_get_data() fetchs the result value of operation from data register. OpenBMC-Staging-Count: 1 Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220407011738.7189-2-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-03-02net: mdio-ipq4019: add delay after clock enableBaruch Siach1-1/+5
commit b6ad6261d27708567b309fdb3102b12c42a070cc upstream. Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f80ac ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16net: mdio: aspeed: Add missing MODULE_DEVICE_TABLEJoel Stanley1-0/+1
[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ] Fix loading of the driver when built as a module. Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01mdio: aspeed: Fix "Link is Down" issueDylan Hung1-0/+7
commit 9dbe33cf371bd70330858370bdbc35c7668f00c3 upstream. The issue happened randomly in runtime. The message "Link is Down" is popped but soon it recovered to "Link is Up". The "Link is Down" results from the incorrect read data for reading the PHY register via MDIO bus. The correct sequence for reading the data shall be: 1. fire the command 2. wait for command done (this step was missing) 3. wait for data idle 4. read data from data register Cc: stable@vger.kernel.org Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed") Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211125024432.15809-1-dylan_hung@aspeedtech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-29net: mdio-ipq4019: Fix the error for an optional regs resourceCai Huoqing1-1/+5
The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28net: mdio: mscc-miim: Fix the mdio controllerHoratiu Vultur1-5/+10
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: mdio: mscc-miim: Make use of the helper function ↵Cai Huoqing1-8/+4
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()Cai Huoqing1-4/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+24
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-18net: mdio-mux: Handle -EPROBE_DEFER correctlySaravana Kannan1-2/+6
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't ignore it and continue registering the rest of the mdiobus children. This would permanently prevent the deferring child mdiobus from working instead of reattempting it in the future. So, if a child mdiobus needs to be reattempted in the future, defer the entire mdio-mux initialization. This fixes the issue where PHYs sitting under the mdio-mux aren't initialized correctly if the PHY's interrupt controller is not yet ready when the mdio-mux is being probed. Additional context in the link below. Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: mdio-mux: Don't ignore memory allocation errorsSaravana Kannan1-10/+18
If we are seeing memory allocation errors, don't try to continue registering child mdiobus devices. It's unlikely they'll succeed. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: mdio-mux: Delete unnecessary devm_kfreeSaravana Kannan1-1/+0
The whole point of devm_* APIs is that you don't have to undo them if you are returning an error that's going to get propagated out of a probe() function. So delete unnecessary devm_kfree() call in the error return path. Fixes: b60161668199 ("mdio: mux: Correct mdio_mux_init error path issues") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16MDIO: Kconfig: Specify more IPQ chipset supportedLuo Jie2-1/+2
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x, IPQ60xx and IPQ50xx. Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated to the IPQ5018 platform. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16net: mdio: Add the reset function for IPQ MDIO driverLuo Jie2-0/+44
1. configure the MDIO clock source frequency. 2. the LDO resource is needed to configure the ethernet LDO available for CMN_PLL. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-25net: mdiobus: withdraw fwnode_mdbiobus_registerMarcin Wojtas1-22/+0
The newly implemented fwnode_mdbiobus_register turned out to be problematic - in case the fwnode_/of_/acpi_mdio are built as modules, a dependency cycle can be observed during the depmod phase of modules_install, eg.: depmod: ERROR: Cycle detected: fwnode_mdio -> of_mdio -> fwnode_mdio depmod: ERROR: Found 2 modules in dependency cycles! OR: depmod: ERROR: Cycle detected: acpi_mdio -> fwnode_mdio -> acpi_mdio depmod: ERROR: Found 2 modules in dependency cycles! A possible solution could be to rework fwnode_mdiobus_register, so that to merge the contents of acpi_mdiobus_register and of_mdiobus_register. However feasible, such change would be very intrusive and affect huge amount of the of_mdiobus_register users. Since there are currently 2 users of ACPI and MDIO (xgmac_mdio and mvmdio), withdraw the fwnode_mdbiobus_register and roll back to a simple 'if' condition in affected drivers. Fixes: 62a6ef6a996f ("net: mdiobus: Introduce fwnode_mdbiobus_register()") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: mdiobus: Introduce fwnode_mdbiobus_register()Marcin Wojtas1-0/+22
This patch introduces a new helper function that wraps acpi_/of_ mdiobus_register() and allows its usage via common fwnode_ interface. Fall back to raw mdiobus_register() in case CONFIG_FWNODE_MDIO is not enabled, in order to satisfy compatibility in all future user drivers. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: mdio: use device_set_node() to setup both fwnode and ofIoana Ciornei2-7/+5
Use the newly introduced helper to setup both the of_node and the fwnode for a given device. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: mdio: setup of_node for the MDIO deviceIoana Ciornei1-0/+1
By mistake, the of_node of the MDIO device was not setup in the patch linked below. As a consequence, any PHY driver that depends on the of_node in its probe callback was not be able to successfully finish its probe on a PHY, thus the Generic PHY driver was used instead. Fix this by actually setting up the of_node. Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: mdio: mscc-miim: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-5/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: mdio: Add ACPI support code for mdioCalvin Johnson3-0/+66
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for each ACPI child node. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11of: mdio: Refactor of_mdiobus_register_phy()Calvin Johnson1-55/+1
Refactor of_mdiobus_register_phy() to use fwnode_mdiobus_register_phy(). Also, remove the of_find_mii_timestamper() since the fwnode variant is used instead. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: mdiobus: Introduce fwnode_mdiobus_register_phy()Calvin Johnson4-40/+158
Introduce fwnode_mdiobus_register_phy() to register PHYs on the mdiobus. From the compatible string, identify whether the PHY is c45 and based on this create a PHY device instance which is registered on the mdiobus. Along with fwnode_mdiobus_register_phy() also introduce fwnode_find_mii_timestamper() and fwnode_mdiobus_phy_device_register() since they are needed. While at it, also use the newly introduced fwnode operation in of_mdiobus_phy_device_register(). Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: mii_timestamper: check NULL in unregister_mii_timestamper()Calvin Johnson1-4/+2
Callers of unregister_mii_timestamper() currently check for NULL value of mii_ts before calling it. Place the NULL check inside unregister_mii_timestamper() and update the callers accordingly. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11of: mdio: Refactor of_get_phy_id()Calvin Johnson1-11/+1
With the introduction of fwnode_get_phy_id(), refactor of_get_phy_id() to use fwnode equivalent. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11of: mdio: Refactor of_phy_find_device()Calvin Johnson1-12/+1
Refactor of_phy_find_device() to use fwnode_phy_find_device(). Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: phy: Introduce fwnode_mdio_find_device()Calvin Johnson1-10/+1
Define fwnode_mdio_find_device() to get a pointer to the mdio_device from fwnode passed to the function. Refactor of_mdio_find_device() to use fwnode_mdio_find_device(). Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10net: mido: mdio-mux-bcm-iproc: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-4/+3
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02net: mdio: Fix spelling mistakesZheng Yongjun4-4/+4
informations ==> information typicaly ==> typically derrive ==> derive eventhough ==> even though Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-3/+0
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-15net: mdio: ipq8064: enlarge sleep after read/write operationAnsuel Smith1-2/+9
With the use of the qca8k dsa driver, some problem arised related to port status detection. With a load on a specific port (for example a simple speed test), the driver starts to behave in a strange way and garbage data is produced. To address this, enlarge the sleep delay and address a bug for the reg offset 31 that require additional delay for this specific reg. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-15net: mdio: ipq8064: add regmap config to disable REGCACHEAnsuel Smith1-10/+24
mdio drivers should not use REGCHACHE. Also disable locking since it's handled by the mdio users and regmap is always accessed atomically. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-15net: mdio: ipq8064: clean whitespaces in defineAnsuel Smith1-12/+13
Fix mixed whitespace and tab for define spacing. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: mdio: octeon: Fix some double free issuesChristophe JAILLET1-2/+0
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the error handling path of the probe function and in remove function. Suggested-By: Andrew Lunn <andrew@lunn.ch> Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: mdio: thunder: Fix a double free issue in the .remove functionChristophe JAILLET1-1/+0
'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the remove function. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: phy: Add support for microchip SMI0 MDIO busAndrew Lunn2-2/+14
SMI0 is a mangled version of MDIO. The main low level difference is the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The read/write information is instead encoded in the PHY address. Extend the bit-bang code to allow the op code to be overridden, but default to normal C22 values. Add an extra compatible to the mdio-gpio driver, and when this compatible is present, set the op codes to 0. A higher level driver, sitting on top of the basic MDIO bus driver can then implement the rest of the microchip SMI0 odderties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net: mdio: Remove redundant dev_err call in mdio_mux_iproc_probe()Guobin Huang1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net: mdio: Add BCM6368 MDIO mux bus controllerÁlvaro Fernández Rojas3-0/+196
This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net: mdio: Alphabetically sort header inclusionCalvin Johnson16-58/+56
Alphabetically sort header inclusion Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-18net: mdio: Remove of_phy_attach()Florian Fainelli1-30/+0
We have no in-tree users, also update the sfp-phylink.rst documentation to indicate that phy_attach_direct() is used instead of of_phy_attach(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPTHeiner Kallweit1-2/+2
Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven1-2/+4
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10net: phy: Move of_mdio from drivers/of to drivers/net/mdioCalvin Johnson3-0/+602
Better place for of_mdio.c is drivers/net/mdio. Move of_mdio.c from drivers/of to drivers/net/mdio Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-01 08:43:37 +0300