summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/smsc/smsc911x.c
AgeCommit message (Expand)AuthorFilesLines
2014-12-15Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel...Linus Torvalds1-1/+0
2014-11-25net/smsc911x: Add minimal runtime PM supportGeert Uytterhoeven1-0/+10
2014-11-13smsc911x: power-up phydev before doing a software reset.Enric Balletbo i Serra1-0/+46
2014-11-13net/smsc911x: Fix delays in the PHY enable/disable routinesAlexander Kochetkov1-5/+2
2014-11-13net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down modeAlexander Kochetkov1-6/+2
2014-10-20net: ethernet: smsc: drop owner assignment from platform_driversWolfram Sang1-1/+0
2014-10-04net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser1-1/+0
2014-06-04net: driver: smsc: set NOCARRIER flag in dev at driver initializationBalakumaran Kannan1-0/+2
2014-03-26smsc911x: No need to print driver versionFabio Estevam1-2/+0
2014-03-26smsc911x: Do not use netdev_dbg() when device is not registeredFabio Estevam1-1/+2
2014-03-25smsc911x: Call dev_consume_skb_any instead of dev_kfree_skb.Eric W. Biederman1-1/+1
2014-03-21smsc911x: Change clock warning message to debug levelFabio Estevam1-1/+1
2013-12-06ethernet: Fix FSF address in file headersJeff Kirsher1-2/+1
2013-11-02smsc911x: replace printk with netdev_ callsBen Boeckel1-1/+1
2013-10-03net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches1-1/+1
2013-08-31net: smsc911x: use dev_get_platdata()Jingoo Han1-1/+1
2013-05-28net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
2013-05-02Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/g...Linus Torvalds1-1/+28
2013-03-19net/smsc911x: Use NULL instead of integer for pointerSachin Kamat1-1/+1
2013-03-02net/smsc911x: Provide common clock functionalityLee Jones1-1/+28
2013-01-15net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli1-3/+2
2013-01-04net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko1-1/+0
2012-12-20drivers/net: Use of_match_ptr() macro in smsc911x.cSachin Kamat1-1/+3
2012-12-11net: smc911x: use io{read,write}*_rep accessorsMatthew Leach1-4/+4
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman1-4/+3
2012-12-03smsc911x: remove __dev* attributesBill Pemberton1-7/+7
2012-11-20net/ethernet: remove useless is_valid_ether_addr from drivers ndo_openJoachim Eastwood1-5/+0
2012-11-15net/smsc911x: Fix ready check in cases where WORD_SWAP is neededKamlakant Patel1-2/+15
2012-07-17ethernet: Use eth_random_addrJoe Perches1-1/+1
2012-06-23smsc911x.c: encapsulate enable irq callsMatthias Brugger1-7/+10
2012-05-31net/smsc911x: Repair broken failure pathsLee Jones1-3/+4
2012-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
2012-04-22drivers/net: Do not free an IRQ if its request failedLee Jones1-2/+1
2012-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-9/+5
2012-04-13net: smsc911x: fix skb handling in receive pathWill Deacon1-9/+5
2012-04-04smsc911x: Support the get_ts_info ethtool method.Richard Cochran1-0/+1
2012-02-16net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka1-1/+2
2012-02-01drivers/net: Remove alloc_etherdev error messagesJoe Perches1-1/+0
2012-01-11smsc911x: use an unique MDIO bus name.Florian Fainelli1-1/+2
2012-01-04net/smsc911x: Check if PHY is in operational mode before software resetJavier Martinez Canillas1-0/+92
2011-11-30net/smsc911x: Add regulator supportRobert Marklund1-11/+100
2011-11-14net/smsc911x: Always wait for the chip to be readyRobert Marklund1-0/+12
2011-10-25Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
2011-09-21net/smsc911x: Correctly configure 16-bit register access from DTDave Martin1-0/+2
2011-08-18net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+1
2011-08-11smsc: Move the SMC (SMSC) driversJeff Kirsher1-0/+2404
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-27 09:25:26 +0300