summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/hw-me.h
AgeCommit message (Collapse)AuthorFilesLines
2018-08-02mei: define dma ring buffer sizes for PCH12 HW and newerAlexander Usyskin1-0/+4
Define dma ring buffer sizes for PCH12 (CLN HW and newer) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: move hbuf_depth from the mei device to the hw modulesTomas Winkler1-0/+2
The host buffer depth is hardware specific so it's better to handle it inside the me and txe hw modules. In me the depth is read from register in txe it's a constant number. The value is now retrieved via mei_hbuf_depth accessor, while it replaces mei_hbuf_max_len. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17mei: me: use an index instead of a pointer for private dataTomas Winkler1-8/+31
Device 'new_id' interface is useful for testing of not yet published hardware on older kernels and for internally used device ids on simulation platforms. However currently with the device configuration held in device_id driver data as a pointer to mei_cfg structure it is hard, as one need to locate the address of the correct structure. A recommended way of doing that is to use and index instead of a pointer. This patch adds a new list of configuration mei_cfg_list[] indexed via enum mei_cfg_idx. In addition it cleanups ich platform naming, renames legacy generation to ich and what was ich to ich10. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06mei: fix the back to back interrupt handlingAlexander Usyskin1-2/+0
Since the newer HW sports two interrupts causes we cannot just simply acknowledge the interrupts directly in the quick handler and store the cause in the member variable, as the cause will be overridden upon next interrupt while the interrupt thread was not yet scheduled handling the previous interrupt. The simple fix is to disable interrupts in quick handler and acknowledge and enabled them in the interrupt thread. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: enable d0i3 interruptsAlexander Usyskin1-0/+2
D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: add flag to indicate D0i3 supportAlexander Usyskin1-2/+4
Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-02mei: me: change power gating function name conventionsAlexander Usyskin1-2/+2
The current power gating naming was confusing, we wish to swap meanings of register and flow level power gating terms, For registers writing level use terms set and unset: mei_me_pg_set, mei_me_pg_unset For flow/high level use power gating enter and power gating exit terms mei_me_pg_enter_sync, mei_me_pg_exit_sync Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27mei: read and print all six FW status registersAlexander Usyskin1-1/+2
ME devices prior to PCH8 (Lynx Point) have two FW status registers, on PCH8 and newer excluding txe there are six FW status registers. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27mei: kill cached host and me csr valuesTomas Winkler1-7/+0
Kill host_hw_status and me_hw_state from me hw structure that used to cache host and me csr values. We do not use the cached values across the function calls anymore Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix kernel-doc warningsAlexander Usyskin1-0/+6
Add missed parameters descriptions and return values descriptions Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: push pci cfg structure me hwTomas Winkler1-1/+25
Device specific configurations are currently only needed by me hw so we can remove it from txe Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28mei: me: move probe quirk to cfg structureTomas Winkler1-0/+2
Move quirk FW type detector to cfg structure Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28mei: add per device configurationAlexander Usyskin1-1/+6
Add mei_cfg structure that holds per device configuration data and hooks, as the first step we add firmware status register offsets Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: me: add runtime pm frameworkTomas Winkler1-0/+2
Add runtime pm framework for ME devices. The runtime pm handlers are used to run me power gating isolation protocol Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: me: add pg exit and entry flow commandsTomas Winkler1-0/+4
For power gating entry we write hbm pg entry request command and then we set pg register For power gating exit we clear pg register and wait for exit request hbm command. Exit power gating request might also be initiated by the firmware w/o explicit driver request The power gating state is tracked by pg_state member of me_hw Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-19mei: Add include of <linux/irqreturn.h>Bjorn Helgaas1-0/+1
We currently include <linux/irqreturn.h> in <linux/pci.h>, but I'm about to remove that from linux/pci.h, so add explicit includes where needed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com>
2013-03-15mei: revamp mei_data2slotsTomas Winkler1-6/+0
1. Move the mei_data2slots to mei_dev.h as it will be used by the all supported HW. 2. Change return value from u8 to u32 to catch possible overflows 3. Eliminate computing the slots number twice in the same function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: move interrupt handlers to be me hw specificTomas Winkler1-0/+3
interrupt handler are platform specifics so we move them to hw-mei.c. For sake of that we need to export write, read, and complete handlers from the interrupt.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: separate compilation of the ME hardware specificsTomas Winkler1-19/+0
We add struct mei_hw_ops to virtualize access to hw specific configurations. This allows us to separate the compilation of the ME interface from the ME hardware specifics Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: initial extract of ME hw specifics from mei_deviceTomas Winkler1-0/+12
This is initial step of move the ME hw specifics out of mei_device structure into mei_me_hw Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-09mei: rename interface to hw-meTomas Winkler1-148/+33
Rename hw-me.h to hw-me-regs.h as this file contains only register definitions. Files hw-me.[ch] now contains ME hw dependant functionality Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07mei: extract device dependent constants into hw-me.hTomas Winkler1-0/+167
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 18:58:55 +0300