summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08media: hdpvr: initialize dev->worker at hdpvr_register_videodevDongliang Mu1-1/+3
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ] hdpvr_register_videodev is responsible to initialize a worker in hdpvr_device. However, the worker is only initialized at hdpvr_start_streaming other than hdpvr_register_videodev. When hdpvr_probe does not initialize its worker, the hdpvr_disconnect will encounter one WARN in flush_work.The stack trace is as follows: hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458 __device_release_driver drivers/base/dd.c:1206 [inline] device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237 bus_remove_device+0x108/0x160 drivers/base/bus.c:529 device_del+0x1fe/0x510 drivers/base/core.c:3592 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228 Fix this by moving the initialization of dev->worker to the starting of hdpvr_register_videodev Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: Revert "media: em28xx: add missing em28xx_close_extension"Pavel Skripkin1-4/+1
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ] This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938. Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian reported [1]. Since quick solution didn't come up let's just revert it to make this device work with upstream kernels. Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1] Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUEDDafna Hirschfeld3-7/+7
[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ] If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14 [ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT) [ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common] [ 65.592395] sp : ffff800012bc3ad0 [ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8 [ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612 [ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0 [ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff [ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78 [ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce [ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228 [ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78 [ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880 [ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0 [ 65.598940] Call trace: [ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common] [ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2] [ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2] [ 65.601103] v4l_streamon+0x3c/0x50 [videodev] [ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev] [ 65.601977] video_usercopy+0x320/0x828 [videodev] [ 65.602419] video_ioctl2+0x3c/0x58 [videodev] [ 65.602830] v4l2_ioctl+0x60/0x90 [videodev] [ 65.603227] __arm64_sys_ioctl+0xa8/0xe0 [ 65.603576] invoke_syscall+0x54/0x118 [ 65.603911] el0_svc_common.constprop.3+0x84/0x100 [ 65.604332] do_el0_svc+0x34/0xa0 [ 65.604625] el0_svc+0x1c/0x50 [ 65.604897] el0t_64_sync_handler+0x88/0xb0 [ 65.605264] el0t_64_sync+0x16c/0x170 [ 65.605587] ---[ end trace 578e0ba07742170d ]--- Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: usb: go7007: s2250-board: fix leak in probe()Dan Carpenter1-6/+4
[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ] Call i2c_unregister_device(audio) on this error path. Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: em28xx: initialize refcount before kref_getDongliang Mu1-4/+4
[ Upstream commit c08eadca1bdfa099e20a32f8fa4b52b2f672236d ] The commit 47677e51e2a4("[media] em28xx: Only deallocate struct em28xx after finishing all extensions") adds kref_get to many init functions (e.g., em28xx_audio_init). However, kref_init is called too late in em28xx_usb_probe, since em28xx_init_dev before will invoke those init functions and call kref_get function. Then refcount bug occurs in my local syzkaller instance. Fix it by moving kref_init before em28xx_init_dev. This issue occurs not only in dev but also dev->dev_next. Fixes: 47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: m920x: don't use stack on USB readsMauro Carvalho Chehab1-1/+11
[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ] Using stack-allocated pointers for USB message data don't work. This driver is almost OK with that, except for the I2C read logic. Fix it by using a temporary read buffer, just like on all other calls to m920x_read(). Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/ Reported-by: rkardell@mida.se Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.James Hilliard1-1/+1
[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ] Some uvc devices appear to require the maximum allowed USB timeout for GET_CUR/SET_CUR requests. So lets just bump the UVC control timeout to 5 seconds which is the same as the usb ctrl get/set defaults: USB_CTRL_GET_TIMEOUT 5000 USB_CTRL_SET_TIMEOUT 5000 It fixes the following runtime warnings: Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1). Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2). Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: dw2102: Fix use after freeAnton Vasilyev1-123/+215
[ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ] dvb_usb_device_init stores parts of properties at d->props and d->desc and uses it on dvb_usb_device_exit. Free of properties on module probe leads to use after free. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597 The patch makes properties static instead of allocated on heap to prevent memleak and use after free. Also fixes s421_properties.devices initialization to have 2 element instead of 6 copied from p7500_properties. [mchehab: fix function call alignments] Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: em28xx: fix memory leak in em28xx_init_devDongliang Mu1-6/+12
[ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ] In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails to deallocate the media_dev allocated in the em28xx_media_device_init. Fix this by adding em28xx_unregister_media_device to free media_dev. BTW, this patch is tested in my local syzkaller instance, and it can prevent the memory leak from occurring again. CC: Pavel Skripkin <paskripkin@gmail.com> Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: stk1160: fix control-message timeoutsJohan Hovold1-2/+2
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)") Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: pvrusb2: fix control-message timeoutsJohan Hovold1-4/+4
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Cc: stable@vger.kernel.org # 2.6.18 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: dib0700: fix undefined behavior in tuner shutdownMichael Kuron1-2/+0
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream. This fixes a problem where closing the tuner would leave it in a state where it would not tune to any channel when reopened. This problem was discovered as part of https://github.com/hselasky/webcamd/issues/16. Since adap->id is 0 or 1, this bit-shift overflows, which is undefined behavior. The driver still worked in practice as the overflow would in most environments result in 0, which rendered the line a no-op. When running the driver as part of webcamd however, the overflow could lead to 0xff due to optimizations by the compiler, which would, in the end, improperly shut down the tuner. The bug is a regression introduced in the commit referenced below. The present patch causes identical behavior to before that commit for adap->id equal to 0 or 1. The driver does not contain support for dib0700 devices with more adapters, assuming such even exist. Tests have been performed with the Xbox One Digital TV Tuner on amd64. Not all dib0700 devices are expected to be affected by the regression; this code path is only taken by those with incorrect endpoint numbers. Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org Cc: stable@vger.kernel.org Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed") Signed-off-by: Michael Kuron <michael.kuron@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: s2255: fix control-message timeoutsJohan Hovold1-2/+2
commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeouts. Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: cpia2: fix control-message timeoutsJohan Hovold1-2/+2
commit 10729be03327f53258cb196362015ad5c6eabe02 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support") Cc: stable@vger.kernel.org # 2.6.17 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: em28xx: fix control-message timeoutsJohan Hovold1-2/+2
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family") Cc: stable@vger.kernel.org # 2.6.16 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: flexcop-usb: fix control-message timeoutsJohan Hovold2-11/+11
commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Note that the driver was multiplying some of the timeout values with HZ twice resulting in 3000-second timeouts with HZ=1000. Also note that two of the timeout defines are currently unused. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-20media: uvcvideo: fix division by zero at stream startJohan Hovold1-0/+4
commit 8aa637bf6d70d2fb2ad4d708d8b9dd02b1c095df upstream. Add the missing bulk-endpoint max-packet sanity check to uvc_video_start_transfer() to avoid division by zero in uvc_alloc_urb_buffers() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Cc: stable@vger.kernel.org # 2.6.26 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-16media: Revert "media: uvcvideo: Set unique vdev name based in type"Ricardo Ribalda1-6/+1
commit f66dcb32af19faf49cc4a9222c3152b10c6ec84a upstream. A lot of userspace depends on a descriptive name for vdev. Without this patch, users have a hard time figuring out which camera shall they use for their video conferencing. This reverts commit e3f60e7e1a2b451f538f9926763432249bcf39c4. Link: https://lore.kernel.org/linux-media/20211207003840.1212374-2-ribalda@chromium.org Cc: <stable@vger.kernel.org> Fixes: e3f60e7e1a2b ("media: uvcvideo: Set unique vdev name based in type") Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22media: mxl111sf: change mutex_init() locationPavel Skripkin1-2/+14
commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream. Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex. Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18media: em28xx: Don't use ops->suspend if it is NULLColin Ian King1-2/+3
[ Upstream commit 51fa3b70d27342baf1ea8aaab3e96e5f4f26d5b2 ] The call to ops->suspend for the dev->dev_next case can currently trigger a call on a null function pointer if ops->suspend is null. Skip over the use of function ops->suspend if it is null. Addresses-Coverity: ("Dereference after null check") Fixes: be7fd3c3a8c5 ("media: em28xx: Hauppauge DualHD second tuner functionality") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: tm6000: Avoid card name truncationKees Cook1-2/+1
[ Upstream commit 42bb98e420d454fef3614b70ea11cc59068395f6 ] The "card" string only holds 31 characters (and the terminating NUL). In order to avoid truncation, use a shorter card description instead of the current result, "Trident TVMaster TM5600/6000/60". Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: e28f49b0b2a8 ("V4L/DVB: tm6000: fix some info messages") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: dvb-usb: fix ununit-value in az6027_rc_queryPavel Skripkin1-0/+1
[ Upstream commit afae4ef7d5ad913cab1316137854a36bea6268a5 ] Syzbot reported ununit-value bug in az6027_rc_query(). The problem was in missing state pointer initialization. Since this function does nothing we can simply initialize state to REMOTE_NO_KEY_PRESSED. Reported-and-tested-by: syzbot+2cd8c5db4a85f0a04142@syzkaller.appspotmail.com Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: ttusb-dec: avoid release of non-acquired mutexEvgeny Novikov1-5/+5
[ Upstream commit 36b9d695aa6fb8e9a312db21af41f90824d16ab4 ] ttusb_dec_send_command() invokes mutex_lock_interruptible() that can fail but then it releases the non-acquired mutex. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Fixes: dba328bab4c6 ("media: ttusb-dec: cleanup an error handling logic") Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: em28xx: add missing em28xx_close_extensionPavel Skripkin1-1/+4
[ Upstream commit 2c98b8a3458df03abdc6945bbef67ef91d181938 ] If em28xx dev has ->dev_next pointer, we need to delete ->dev_next list node from em28xx_extension_devlist on disconnect to avoid UAF bugs and corrupted list bugs, since driver frees this pointer on disconnect. Reported-and-tested-by: syzbot+a6969ef522a36d3344c9@syzkaller.appspotmail.com Fixes: 1a23f81b7dc3 ("V4L/DVB (9979): em28xx: move usb probe code to a proper place") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()Anant Thazhemadam1-1/+1
[ Upstream commit 899a61a3305d49e8a712e9ab20d0db94bde5929f ] In dibusb_read_eeprom_byte(), if dibusb_i2c_msg() fails, val gets assigned an value that's not properly initialized. Using kzalloc() in place of kmalloc() for the buffer fixes this issue, as the val can now be set to 0 in the event dibusb_i2c_msg() fails. Reported-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com Tested-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: uvcvideo: Set unique vdev name based in typeRicardo Ribalda1-1/+6
[ Upstream commit e3f60e7e1a2b451f538f9926763432249bcf39c4 ] All the entities must have a unique name. We can have a descriptive and unique name by appending the function and the entity->id. This is even resilent to multi chain devices. Fixes v4l2-compliance: Media Controller ioctls: fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end() test MEDIA_IOC_G_TOPOLOGY: FAIL fail: v4l2-test-media.cpp(394): num_data_links != num_links test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: uvcvideo: Return -EIO for control errorsRicardo Ribalda1-0/+5
[ Upstream commit ffccdde5f0e17d2f0d788a9d831a027187890eaa ] The device is doing something unexpected with the control. Either because the protocol is not properly implemented or there has been a HW error. Fixes v4l2-compliance: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22) test VIDIOC_G/S_CTRL: FAIL fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22) test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18media: uvcvideo: Set capability in s_paramRicardo Ribalda1-2/+5
[ Upstream commit 97a2777a96070afb7da5d587834086c0b586c8cc ] Fixes v4l2-compliance: Format ioctls (Input 0): warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-01Merge tag 'media/v5.15-1' of ↵Linus Torvalds15-130/+149
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new sensor drivers: imx335, imx412, ov9282 - new IR transmitter driver: meson-ir-tx - handro driver gained support for H.264 for Rockchip VDPU2 - imx gained support for i.MX8MQ - ti-vpe has gained support for other SoC variants - lots of cleanups, fixes, board additions and doc improvements * tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits) media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control media: venus: venc: Add support for intra-refresh period media: v4l2-ctrls: Add intra-refresh period control media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value media: venus: helper: do not set constrained parameters for UBWC media: venus: venc: Fix potential null pointer dereference on pointer fmt media: venus: hfi: fix return value check in sys_get_prop_image_version() media: tegra-cec: Handle errors of clk_prepare_enable() media: cec-pin: rename timer overrun variables media: TDA1997x: report -ENOLINK after disconnecting HDMI source media: TDA1997x: fix tda1997x_query_dv_timings() return value media: Fix cosmetic error in TDA1997x driver media: v4l2-dv-timings.c: fix wrong condition in two for-loops media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: imx7_mipi_csis: convert some switch cases to the default media: imx: imx7-media-csi: Fix buffer return upon stream start failure media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1 media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support ...
2021-08-04media: em28xx-input: fix refcount bug in em28xx_usb_disconnectDongliang Mu1-1/+0
If em28xx_ir_init fails, it would decrease the refcount of dev. However, in the em28xx_ir_fini, when ir is NULL, it goes to ref_put and decrease the refcount of dev. This will lead to a refcount bug. Fix this bug by removing the kref_put in the error handling code of em28xx_ir_init. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28 Modules linked in: CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.13.0 #3 Workqueue: usb_hub_wq hub_event RIP: 0010:refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28 Call Trace: kref_put.constprop.0+0x60/0x85 include/linux/kref.h:69 em28xx_usb_disconnect.cold+0xd7/0xdc drivers/media/usb/em28xx/em28xx-cards.c:4150 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458 __device_release_driver drivers/base/dd.c:1201 [inline] device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1232 bus_remove_device+0x108/0x160 drivers/base/bus.c:529 device_del+0x1fe/0x510 drivers/base/core.c:3540 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2221 hub_port_connect drivers/usb/core/hub.c:5151 [inline] hub_port_connect_change drivers/usb/core/hub.c:5440 [inline] port_event drivers/usb/core/hub.c:5586 [inline] hub_event+0xf81/0x1d40 drivers/usb/core/hub.c:5668 process_one_work+0x2c9/0x610 kernel/workqueue.c:2276 process_scheduled_works kernel/workqueue.c:2338 [inline] worker_thread+0x333/0x5b0 kernel/workqueue.c:2424 kthread+0x188/0x1d0 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: ac5688637144 ("media: em28xx: Fix possible memory leak of em28xx struct") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-30media: rtl28xxu: fix zero-length control requestJohan Hovold1-1/+10
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. The driver uses a zero-length i2c-read request for type detection so update the control-request code to use usb_sndctrlpipe() in this case. Note that actually trying to read the i2c register in question does not work as the register might not exist (e.g. depending on the demodulator) as reported by Eero Lehtinen <debiangamer2@gmail.com>. Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Reported-by: Eero Lehtinen <debiangamer2@gmail.com> Tested-by: Eero Lehtinen <debiangamer2@gmail.com> Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-30media: Revert "media: rtl28xxu: fix zero-length control request"Johan Hovold1-2/+1
This reverts commit 25d5ce3a606a1eb23a9265d615a92a876ff9cb5f. The patch in question causes a regression and was superseded by a second version. Unfortunately, the first revision ended up being applied instead of the correct one. Link: https://lore.kernel.org/r/YL3MCGY5wTsW2kEF@hovoldconsulting.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: stkwebcam: fix memory leak in stk_camera_probePavel Skripkin1-2/+4
My local syzbot instance hit memory leak in usb_set_configuration(). The problem was in unputted usb interface. In case of errors after usb_get_intf() the reference should be putted to correclty free memory allocated for this interface. Fixes: ec16dae5453e ("V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: go7007: remove redundant initializationPavel Skripkin1-26/+0
In go7007_alloc() kzalloc() is used for struct go7007 allocation. It means that there is no need in zeroing any members, because kzalloc will take care of it. Removing these reduntant initialization steps increases execution speed a lot: Before: + 86.802 us | go7007_alloc(); After: + 29.595 us | go7007_alloc(); Fixes: 866b8695d67e8 ("Staging: add the go7007 video driver") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: go7007: fix memory leak in go7007_usb_probePavel Skripkin1-1/+1
In commit 137641287eb4 ("go7007: add sanity checking for endpoints") endpoint sanity check was introduced, but if check fails it simply returns with leaked pointers. Cutted log from my local syzbot instance: BUG: memory leak unreferenced object 0xffff8880209f0000 (size 8192): comm "kworker/0:4", pid 4916, jiffies 4295263583 (age 29.310s) hex dump (first 32 bytes): 30 b0 27 22 80 88 ff ff 75 73 62 2d 64 75 6d 6d 0.'"....usb-dumm 79 5f 68 63 64 2e 33 2d 31 00 00 00 00 00 00 00 y_hcd.3-1....... backtrace: [<ffffffff860ca856>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff860ca856>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff860ca856>] go7007_alloc+0x46/0xb40 drivers/media/usb/go7007/go7007-driver.c:696 [<ffffffff860de74e>] go7007_usb_probe+0x13e/0x2200 drivers/media/usb/go7007/go7007-usb.c:1114 [<ffffffff854a5f74>] usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 [<ffffffff845a7151>] really_probe+0x291/0xf60 drivers/base/dd.c:576 BUG: memory leak unreferenced object 0xffff88801e2f2800 (size 512): comm "kworker/0:4", pid 4916, jiffies 4295263583 (age 29.310s) hex dump (first 32 bytes): 00 87 40 8a ff ff ff ff 00 00 00 00 00 00 00 00 ..@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff860de794>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff860de794>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff860de794>] go7007_usb_probe+0x184/0x2200 drivers/media/usb/go7007/go7007-usb.c:1118 [<ffffffff854a5f74>] usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 [<ffffffff845a7151>] really_probe+0x291/0xf60 drivers/base/dd.c:576 Fixes: 137641287eb4 ("go7007: add sanity checking for endpoints") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: dvb-usb: Fix error handling in dvb_usb_i2c_initDongliang Mu2-3/+8
In dvb_usb_i2c_init, if i2c_add_adapter fails, it only prints an error message, and then continues to set DVB_USB_STATE_I2C. This affects the logic of dvb_usb_i2c_exit, which leads to that, the deletion of i2c_adap even if the i2c_add_adapter fails. Fix this by returning at the failure of i2c_add_adapter and then move dvb_usb_i2c_exit out of the error handling code of dvb_usb_i2c_init. Fixes: 13a79f14ab28 ("media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: dvb-usb: fix uninit-value in vp702x_read_mac_addrDongliang Mu1-3/+9
If vp702x_usb_in_op fails, the mac address is not initialized. And vp702x_read_mac_addr does not handle this failure, which leads to the uninit-value in dvb_usb_adapter_dvb_init. Fix this by handling the failure of vp702x_usb_in_op. Fixes: 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_initDongliang Mu1-2/+4
If dibusb_read_eeprom_byte fails, the mac address is not initialized. And nova_t_read_mac_address does not handle this failure, which leads to the uninit-value in dvb_usb_adapter_dvb_init. Fix this by handling the failure of dibusb_read_eeprom_byte. Reported-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com Fixes: 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: usb: dvb-usb-v2: af9035: let subdrv autoselect enable si2168 and si2157Uwe Kleine-König1-0/+2
The Logilink VG0022A DVB-T2 stick has these three devices. So to enable support for this stick in the presence of MEDIA_SUBDRV_AUTOSELECT, let DVB_USB_AF9035 select the two other drivers. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: usb: dvb-usb-v2: af9035: report if i2c client isn't boundUwe Kleine-König1-0/+1
If a sub device doesn't immediately bind after it was added, emit an error indication to the kernel log to help debugging. This happens for example if the needed driver isn't available at all. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: drivers/media/usb/gspca: fix typo Fliker -> FlickerHerman2-70/+70
Change 'Fliker' into 'Flicker'. Signed-off-by: Herman <yanshuaijun@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: uvc: don't do DMA on stackMauro Carvalho Chehab1-11/+23
As warned by smatch: drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i) drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i) those two functions call uvc_query_ctrl passing a pointer to a data at the DMA stack. those are used to send URBs via usb_control_msg(). Using DMA stack is not supported and should not work anymore on modern Linux versions. So, use a kmalloc'ed buffer. Cc: stable@vger.kernel.org # Kernel 4.9 and upper Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: gspca: Drop default mEzequiel Garcia1-1/+0
Drop the "default m", as options should default to disabled. No other media driver is enabled by default. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-12media: dvbsky: add support for MyGica T230C2_LITE and T230AJán Čáni1-10/+27
Add Geniatech MyGica T230C2_LITE and T230A as many people are asking support for these devices on forums. Link: https://lore.kernel.org/linux-media/YMuptIYFLdwSmw//@kali Signed-off-by: Ján Čáni <pego149@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: usb: cpia2: Fixed Coding Style issuesPiyush Thange1-75/+74
Fixed all the Coding style issues generated by checkpatch.pl. The changes made considering the --strict option. Signed-off-by: Piyush Thange <pthange19@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-1/+1
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: ttusb-dec: cleanup an error handling logicMauro Carvalho Chehab1-13/+10
Simplify the logic at ttusb_dec_send_command(). Besides avoiding some code duplication, as a side effect, this could remove this false positive return with spatch: drivers/media/usb/ttusb-dec/ttusb_dec.c:380 ttusb_dec_send_command() warn: inconsistent returns '&dec->usb_mutex'. Locked on : 330 Unlocked on: 354,365,380 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-11media: uvcvideo: Fix pixel format change for Elgato Cam Link 4KBenjamin Drung1-0/+27
The Elgato Cam Link 4K HDMI video capture card reports to support three different pixel formats, where the first format depends on the connected HDMI device. ``` $ v4l2-ctl -d /dev/video0 --list-formats-ext ioctl: VIDIOC_ENUM_FMT Type: Video Capture [0]: 'NV12' (Y/CbCr 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) [1]: 'NV12' (Y/CbCr 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) [2]: 'YU12' (Planar YUV 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) ``` Changing the pixel format to anything besides the first pixel format does not work: ``` $ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12 Format Video Capture: Width/Height : 3840/2160 Pixel Format : 'NV12' (Y/CbCr 4:2:0) Field : None Bytes per Line : 3840 Size Image : 12441600 Colorspace : sRGB Transfer Function : Rec. 709 YCbCr/HSV Encoding: Rec. 709 Quantization : Default (maps to Limited Range) Flags : ``` User space applications like VLC might show an error message on the terminal in that case: ``` libv4l2: error set_fmt gave us a different result than try_fmt! ``` Depending on the error handling of the user space applications, they might display a distorted video, because they use the wrong pixel format for decoding the stream. The Elgato Cam Link 4K responds to the USB video probe VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The second byte contains bFormatIndex (instead of being the second byte of bmHint). The first byte is always zero. The third byte is always 1. The firmware bug was reported to Elgato on 2020-12-01 and it was forwarded by the support team to the developers as feature request. There is no firmware update available since then. The latest firmware for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67. Therefore correct the malformed data structure for this device. The change was successfully tested with VLC, OBS, and Chromium using different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160, 1920x1080), and frame rates (29.970 and 59.940 fps). Cc: stable@vger.kernel.org Signed-off-by: Benjamin Drung <bdrung@posteo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: cinergyt2: make properties constSean Young1-8/+3
The dvb_usb_device_properties can be const. This makes it clear that the static can be shared across threads. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: dvd_usb: memory leak in cinergyt2_fe_attachDongliang Mu1-0/+2
When the driver fails to talk with the hardware with dvb_usb_generic_rw, it will return an error to dvb_usb_adapter_frontend_init. However, the driver forgets to free the resource (e.g., struct cinergyt2_fe_state), which leads to a memory leak. Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw fails in cinergyt2_frontend_attach. backtrace: [<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline] [<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline] [<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271 [<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74 [<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290 [<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline] [<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline] [<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287 Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 06:43:33 +0300