summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)AuthorFilesLines
2022-04-13drm/bridge: Add missing pm_runtime_put_syncYongzhi Liu1-6/+12
[ Upstream commit 46f47807738441e354873546dde0b000106c068a ] pm_runtime_get_sync() will increase the rumtime PM counter even when it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Besides, a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1643008835-73961-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: cdns-dsi: Make sure to to create proper aliases for dtNishanth Menon1-0/+1
[ Upstream commit ffb5c099aaa13ab7f73c29ea6ae26bce8d7575ae ] Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform. Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210921174059.17946-1-nm@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: anx7625: Fix overflow issue on reading EDIDPin-Yen Lin1-1/+2
[ Upstream commit d5c6f647aec9ed524aedd04a3aec5ebc21d39007 ] The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: dw-hdmi: use safe format when first in bridge chainNeil Armstrong1-2/+3
[ Upstream commit 1528038385c0a706aac9ac165eeb24044fef6825 ] When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm: bridge: adv7511: Fix ADV7535 HPD enablementJagan Teki2-7/+23
[ Upstream commit 3dbc84a595d17f64f14fcea00120d31e33e98880 ] Existing HPD enablement logic is not compatible with ADV7535 bridge, thus any runtime plug-in of HDMI cable is not working on these bridge designs. Unlike other ADV7511 family of bridges, the ADV7535 require HPD_OVERRIDE bit to set and reset for proper handling of HPD functionality. Fix it. Fixes: 8501fe4b14a3 ("drm: bridge: adv7511: Add support for ADV7535") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220109172949.168167-1-jagan@amarulasolutions.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probeMiaoqian Lin1-0/+1
[ Upstream commit b146e343a9e05605b491b1bf4a2b62a39d5638d8 ] The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220105104826.1418-1-linmq006@gmail.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probeMiaoqian Lin1-0/+1
[ Upstream commit 96211b7c56b109a52768e6cc5e23a1f79316eca0 ] If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for __dw_mipi_dsi_probe. Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220105104113.31415-1-linmq006@gmail.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08drm/bridge: Fix free wrong object in sii8620_init_rcp_input_devMiaoqian Lin1-1/+1
[ Upstream commit 7c442e76c06cb1bef16a6c523487438175584eea ] rc_dev is allocated by rc_allocate_device(), and doesn't assigned to ctx->rc_dev before calling rc_free_device(ctx->rc_dev). So it should call rc_free_device(rc_dev); Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211227092522.21755-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERSThomas Zimmermann1-1/+1
[ Upstream commit 3c3384050d68570f9de0fec9e58824decfefba7a ] Fix a number of undefined references to drm_kms_helper.ko in drm_dp_helper.ko: arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state': drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work': drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work': drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work': drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event' This happens if panel-edp.ko has been configured with DRM_PANEL_EDP=y DRM_DP_HELPER=y DRM_KMS_HELPER=m which builds DP helpers into the kernel and KMS helpers sa a module. Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem. To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers cannot be selected directly by the user, config symbols should avoid depending on it anyway. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Brian Masney <bmasney@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Linux Kernel Functional Testing <lkft@linaro.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/478296/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08drm/bridge: ti-sn65dsi86: Properly undo autosuspendDouglas Anderson1-2/+3
[ Upstream commit 26d3474348293dc752c55fe6d41282199f73714c ] The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We weren't doing that for autosuspend. Let's do it. Fixes: 9bede63127c6 ("drm/bridge: ti-sn65dsi86: Use pm_runtime autosuspend") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220222141838.1.If784ba19e875e8ded4ec4931601ce6d255845245@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16phy: dphy: Correct clk_pre parameterLiu Ying1-7/+5
[ Upstream commit 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff ] The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE parameter's unit is Unit Interval(UI) and the minimum value is 8. Also, kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy mentions that it should be in UI. However, the dphy core driver wrongly sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds. So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE parameter's minimum value according to the D-PHY specification. I'm assuming that all impacted custom drivers shall program values in TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY specification mentions that the frequency of TxByteClkHS is exactly 1/8 the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant custom driver code is changed to program those values as DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options") Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: analogix_dp: Make PSR-exit block lessBrian Norris1-2/+12
commit c4c6ef229593366ab593d4d424addc7025b54a76 upstream. Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), "PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor started using the blocking variant, for a variety of reasons -- quoting Sean Paul's potentially-faulty memory: """ - To avoid racing a subsequent PSR entry (if exit takes a long time) - To avoid racing disable/modeset - We're not displaying new content while exiting PSR anyways, so there is minimal utility in allowing frames to be submitted - We're lying to userspace telling them frames are on the screen when we're just dropping them on the floor """ However, I'm finding that this blocking transition is causing upwards of 60+ ms of unneeded latency on PSR-exit, to the point that initial cursor movements when leaving PSR are unbearably jumpy. It turns out that we need to meet in the middle somewhere: Sean is right that we were "lying to userspace" with a non-blocking PSR-exit, but the new blocking behavior is also waiting too long: According to the eDP specification, the sink device must support PSR entry transitions from both state 4 (ACTIVE_RESYNC) and state 0 (INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must display the incoming active frames from the Source device with no visible glitches and/or artifacts." Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before moving on; we are ready to display video, and subsequent PSR-entry is safe. Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin), where this saves about 60ms of latency, for PSR-exit that used to take about 80ms. Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <stable@vger.kernel.org> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/bridge: megachips: Ensure both bridges are probed before registrationMartyn Welch1-12/+28
[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ] In the configuration used by the b850v3, the STDP2690 is used to read EDID data whilst it's the STDP4028 which can detect when monitors are connected. This can result in problems at boot with monitors connected when the STDP4028 is probed first, a monitor is detected and an attempt is made to read the EDID data before the STDP2690 has probed: [ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 3.803845] pgd = (ptrval) [ 3.806581] [00000018] *pgd=00000000 [ 3.810180] Internal error: Oops: 5 [#1] SMP ARM [ 3.814813] Modules linked in: [ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1 [ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.830705] Workqueue: events_unbound deferred_probe_work_func [ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c [ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c [ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013 [ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c [ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800 [ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0 [ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180 [ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0 [ 3.897034] Register r1 information: non-paged memory [ 3.902097] Register r2 information: non-paged memory [ 3.907160] Register r3 information: non-slab/vmalloc memory [ 3.912832] Register r4 information: non-slab/vmalloc memory [ 3.918503] Register r5 information: NULL pointer [ 3.923217] Register r6 information: non-slab/vmalloc memory [ 3.928887] Register r7 information: NULL pointer [ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024 [ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048 [ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048 [ 3.959873] Register r11 information: non-slab/vmalloc memory [ 3.965632] Register r12 information: non-paged memory [ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval)) [ 3.977148] Stack: (0x81c359d0 to 0x81c36000) [ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e [ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0 [ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8 [ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848 [ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800 [ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000 [ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000 [ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8 [ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0 [ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950 [ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059 [ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400 [ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008 [ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340 [ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000 [ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4 [ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40 [ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800 [ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28 [ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700 [ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68 [ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88 [ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0 [ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60 [ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58 [ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c [ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800 [ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48 [ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c [ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90 [ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0 [ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8 [ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c [ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810 [ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c [ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c [ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68 [ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080 [ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650 [ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90 [ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800 [ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc [ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18 [ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298 [ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000 [ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20 [ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000 [ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000 [ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.391155] Backtrace: [ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c) [ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840 [ 4.410534] r4:810c35f0 [ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c) [ 4.424240] r5:00000045 r4:810c35f0 [ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384) [ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8 [ 4.446917] r4:00000008 [ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4) [ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010 [ 4.468556] r4:81fbb700 [ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0) [ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800 [ 4.490276] r4:81fbb700 [ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4) [ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800 [ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130) [ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800 [ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0) [ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240 [ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184) [ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80 [ 4.553440] r4:81fe9740 [ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20) [ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440 [ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8) [ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8) [ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000 [ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460) [ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810 [ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230) [ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810 [ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0) [ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310 [ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c) [ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001 [ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8) [ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000 [ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190) [ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810 [ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20) [ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080 [ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c) [ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0) [ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080 [ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c) [ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00 [ 4.738981] r4:810c50c0 r3:80615bc0 [ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570) [ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800 [ 4.758608] r4:817eeb00 [ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190) [ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00 [ 4.776417] r4:817efa40 [ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24) [ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8) [ 4.791266] 5fa0: 00000000 00000000 00000000 00000000 [ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8 [ 4.822120] r4:817efa40 [ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018) Split the registration from the STDP4028 probe routine and only perform registration once both the STDP4028 and STDP2690 have probed. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> CC: Peter Senna Tschudin <peter.senna@gmail.com> CC: Martyn Welch <martyn.welch@collabora.co.uk> CC: Neil Armstrong <narmstrong@baylibre.com> CC: Robert Foss <robert.foss@linaro.org> CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> CC: Jonas Karlman <jonas@kwiboo.se> CC: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTORNeil Armstrong4-8/+27
[ Upstream commit 3f2532d65a571ca02258b547b5b68ab2e9406fdb ] The current ELD handling takes the internal connector ELD buffer and shares it to the I2S and AHB sub-driver. But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created elsewhere (or not), and an eventual connector is known only if the bridge chain up to a connector is enabled. The current dw-hdmi code gets the current connector from atomic_enable() so use the already stored connector pointer and replace the buffer pointer with a callback returning the current connector ELD buffer. Since a connector is not always available, either pass an empty ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld() in AHB driver. Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed typo in commit log] Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: ti-sn65dsi86: Set max register for regmapStephen Boyd1-0/+1
[ Upstream commit 0b665d4af35837f0a0ae63135b84a3c187c1db3b ] Set the maximum register to 0xff so we can dump the registers for this device in debugfs. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Cc: Rob Clark <robdclark@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211215002529.382383-1-swboyd@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/bridge: display-connector: fix an uninitialized pointer in probe()Dan Carpenter1-1/+1
[ Upstream commit 189723fbe9aca18d6f7d638c59a40288030932b5 ] The "label" pointer is used for debug output. The code assumes that it is either NULL or valid, but it is never set to NULL. It is either valid or uninitialized. Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm/bridge: nwl-dsi: Add atomic_get_input_bus_fmtsGuido Günther1-0/+35
[ Upstream commit 2f1495fac8d38bfade18bd7e31fa787cd7815626 ] Components further up in the chain might ask us for supported formats. Without this MEDIA_BUS_FMT_FIXED is assumed which then breaks display output with mxsfb since it can't determine a proper bus format. We handle the bus formats that correspond to the DSI formats the bridge can potentially output (see chapter 13.6 of the i.MX 8MQ reference manual) - which matches what xsfb can input. Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1712f2b952694fd4484dfd8576fbc5b4d7adf042.1633959458.git.agx@sigxcpu.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm/bridge/lontium-lt9611uxc: fix provided connector suportDmitry Baryshkov1-3/+6
[ Upstream commit 15184965783aab3ca7ee4f939e2598943b3f40f9 ] - set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug events on its own - do not call drm_kms_helper_hotplug_event() unless mode_config.funcs pointer is not NULL to remove possible kernel oops. Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210708230329.395976-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm: bridge: it66121: Fix return value it66121_probeAlex Bee1-2/+14
[ Upstream commit f3bc07eba481942a246926c5b934199e7ccd567b ] Currently it66121_probe returns -EPROBE_DEFER if the there is no remote endpoint found in the device tree which doesn't seem helpful, since this is not going to change later and it is never checked if the next bridge has been initialized yet. It will fail in that case later while doing drm_bridge_attach for the next bridge in it66121_bridge_attach. Since the bindings documentation for it66121 bridge driver states there has to be a remote endpoint defined, its safe to return -EINVAL in that case. This additonally adds a check, if the remote endpoint is enabled and returns -EPROBE_DEFER, if the remote bridge hasn't been initialized (yet). Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210918140420.231346-1-knaerzche@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm/bridge: it66121: Wait for next bridge to be probedPaul Cercueil1-0/+3
[ Upstream commit 8b03e3fc79189b17d31a82f5e175698802a11e87 ] If run before the next bridge is initialized, of_drm_find_bridge() will give us a NULL pointer. If that's the case, return -EPROBE_DEFER; we may have more luck next time. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-2-paul@crapouillou.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm/bridge: it66121: Initialize {device,vendor}_idsPaul Cercueil1-1/+1
[ Upstream commit 3a5f3d61de657bc1c2b53b77d065c5526f982e10 ] These two arrays are populated with data read from the I2C device through regmap_read(), and the data is then compared with hardcoded vendor/product ID values of supported chips. However, the return value of regmap_read() was never checked. This is fine, as long as the two arrays are zero-initialized, so that we don't compare the vendor/product IDs against whatever garbage is left on the stack. Address this issue by zero-initializing these two arrays. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-1-paul@crapouillou.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()Robert Foss1-4/+8
[ Upstream commit 7f16d0f3b8e2d13f940e944cd17044ca8eeb8b32 ] The return value of sp_tx_rst_aux() is not propagated, which means both compiler warnings and potential errors not being handled. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-1-robert.foss@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12drm/bridge: ti-sn65dsi86: Avoid creating multiple connectorsRob Clark1-0/+3
If we created our own connector because the driver does not support the NO_CONNECTOR flag, we don't want the downstream bridge to *also* create a connector. And if this driver did pass the NO_CONNECTOR flag (and we supported that mode) this would change nothing. Fixes: 4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge") Reported-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com
2021-08-06drm/bridge: anx7625: Tune K value for IVO panelXin Ji2-4/+24
IVO panel require less input video clock variation than video clock variation in DP CTS spec. This patch decreases the K value of ANX7625 which will shrink eDP Tx video clock variation to meet IVO panel's requirement. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210806104407.2208538-1-xji@analogixsemi.com
2021-08-06drm: bridge: it66121: Check drm_bridge_attach retvalRobert Foss1-0/+2
The return value of drm_bridge_attach() is ignored during the it66121_bridge_attach() call, which is incorrect. Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Signed-off-by: Robert Foss <robert.foss@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org
2021-07-31drm/bridge: ti-sn65dsi86: Add some 100 us delaysDouglas Anderson1-0/+6
The manual has always said that we need 100 us delays in a few places. Though it hasn't seemed to be a big deal to skip these, let's add them in case it makes something happier. NOTE: this fixes no known issues but it seems good to make it right. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.3.I842d483139531aa4651da8338512fdf0171ff23c@changeid
2021-07-31drm/bridge: ti-sn65dsi86: Fix power off sequenceDouglas Anderson1-4/+7
When testing with a panel that's apparently a little more persnickety about the correct power sequence (specifically Samsung ATNA33XC20), we found that the ti-sn65dsi86 was doing things just slightly wrong. Looking closely at the ti-sn65dsi86's datasheet, the power off sequence is supposed to be: 1. Clear VSTREAM_ENABLE bit 2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state. 3. Program the ML_TX_MODE to 0x0 (OFF) 4. Program the DP_NUM_LANES register to 0x0 5. Clear the DP_PLL_EN bit. 6. Deassert the EN pin. 7. Remove power from supply pins Since we were doing the whole sequence in the "disable", I believe that step #2 (stopping the DSI stream from the GPU) wasn't happening. We also weren't setting DP_NUM_LANES to 0. Let's fix this. NOTE: things are a little asymmetric now. For instance, we turn the PLL on in "enable" but now we're not turning it off until "post_disable". It would seem to make sense to move the PLL turning on to "pre_enable" to match. Unfortunately, I don't believe that's allowed. It looks as if (in the non-refclk mode which probably nobody is using) we have to wait until the MIPI clock is there before we can enable the PLL. In any case, the way it is here won't really hurt--it'll just leave the PLL on a little longer. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.2.If8a8ec3bf1855cf0dbb62c005a71d6698c99c125@changeid
2021-07-30Merge tag 'drm-misc-next-2021-07-29' of ↵Dave Airlie7-22/+50
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com
2021-07-28drm: bridge: dw-hdmi: Attach to next bridge if availableLaurent Pinchart1-1/+53
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings require a video output port connected to an HDMI sink (most likely an HDMI connector, in rare cases another bridges converting HDMI to another protocol). For those platforms, retrieve the next bridge and attach it from the dw-hdmi bridge attach handler. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart4-22/+3
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-07-28drm/bridge: make a const array static, makes object smallerColin Ian King1-1/+1
Don't populate the const array frs_limits on the stack but instead make it static. Makes the object code smaller by 128 bytes: Before: text data bss dec hex filename 24845 7440 64 32349 7e5d ./drivers/gpu/drm/bridge/tc358768.o After: text data bss dec hex filename 24749 7408 64 32221 7ddd ./drivers/gpu/drm/bridge/tc358768.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2021-07-27drm/bridge: dw-mipi-dsi: Find the possible DSI devicesJagan Teki1-15/+43
Finding panel_or_bridge might vary based on associated DSI devices like DSI panel, bridge, and I2C based DSI bridge. 1. DSI panels and bridges will invoke the host attach from probe in order to find the panel_or_bridge. chipone_probe() dw_mipi_dsi_host_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_host_attach().start chipone_attach(). start chipone_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done 2. I2C based DSI bridge will invoke the drm_bridge_attach from bridge attach in order to find the panel_or_bridge. ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... dw_mipi_dsi_host_attach().start sn65dsi83_attach(). start sn65dsi83_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done So, invoke the panel_or_bridge from host attach and bridge attach in order to find all possible DSI devices. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210704140309.268469-1-jagan@amarulasolutions.com
2021-07-27drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling featuresNicolas Boichat5-6/+6
Many of the DSI flags have names opposite to their actual effects, e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually be disabled. Fix this by including _NO_ in the flag names, e.g. MIPI_DSI_MODE_NO_EOT_PACKET. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com> Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
2021-07-25drm/bridge: nwl-dsi: Avoid potential multiplication overflow on 32-bitGeert Uytterhoeven1-1/+1
As nwl_dsi.lanes is u32, and NSEC_PER_SEC is 1000000000L, the second multiplication in dsi->lanes * 8 * NSEC_PER_SEC will overflow on a 32-bit platform. Fix this by making the constant unsigned long long, forcing 64-bit arithmetic. As iMX8 is arm64, this driver is currently used on 64-bit platforms only, where long is 64-bit, so this cannot happen. But the issue will start to happen when the driver is reused for a 32-bit SoC (e.g. i.MX7ULP), or when code is copied for a new driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ebb82941a86b4e35c4fcfb1ef5a5cfad7c1fceab.1626255956.git.geert+renesas@glider.be
2021-07-10drm: bridge: nwl-dsi: Drop unused nwl_dsi_plat_clk_configJagan Teki1-6/+0
nwl_dsi_plat_clk_config structure added in below commit but not used anywhere in the driver. commit <44cfc6233447c> ("drm/bridge: Add NWL MIPI DSI host controller support") Drop it. Cc: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210704093433.27717-1-jagan@amarulasolutions.com
2021-06-24drm/bridge: ti-sn65dsi86: Split connector creation to a functionLaurent Pinchart1-10/+21
To prepare for making connector creation option, move connector creation out of ti_sn_bridge_attach to a separate function. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-7-laurent.pinchart+renesas@ideasonboard.com
2021-06-24drm/bridge: ti-sn65dsi86: Group code in sectionsLaurent Pinchart1-298/+321
Reorganize the functions in sections, related to connector operations, bridge operations, AUX adapter, GPIO controller and probe & remove. This prepares for proper support of DRM_BRIDGE_ATTACH_NO_CONNECTOR that will add more functions, to ensure that the code will stay readable. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-6-laurent.pinchart+renesas@ideasonboard.com
2021-06-24drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridgeLaurent Pinchart1-12/+20
To simplify interfacing with the panel, wrap it in a panel-bridge and let the DRM bridge helpers handle chaining of operations. This also prepares for support of DRM_BRIDGE_ATTACH_NO_CONNECTOR, which requires all components in the display pipeline to be represented by bridges. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-5-laurent.pinchart+renesas@ideasonboard.com
2021-06-24drm/bridge: ti-sn65dsi86: Use bitmask to store valid ratesLaurent Pinchart1-11/+13
The valid rates are stored in an array of 8 booleans. Replace it with a bitmask to save space. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-4-laurent.pinchart+renesas@ideasonboard.com
2021-06-24drm/bridge: ti-sn65dsi86: Make enable GPIO optionalLaurent Pinchart1-1/+2
The enable signal may not be controllable by the kernel. Make it optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210624000304.16281-3-laurent.pinchart+renesas@ideasonboard.com
2021-06-22drm: bridge: ti-sn65dsi83: Retrieve the display mode from the stateLaurent Pinchart1-23/+26
Instead of storing a copy of the display mode in the sn65dsi83 structure, retrieve it from the atomic state in sn65dsi83_atomic_enable(). This allows the removal of the .mode_set() operation, and completes the transition to the atomic API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-6-laurent.pinchart@ideasonboard.com
2021-06-22drm: bridge: ti-sn65dsi83: Retrieve output format from bridge stateLaurent Pinchart1-37/+36
The driver currently iterates over all connectors to get the bus format, used to configure the LVDS output format. This causes several issues: - If other connectors than the LVDS output are present, the format used by the driver may end up belonging to an entirely different output. - The code can crash if some connectors are not connected, as bus_format may then be NULL. - There's no guarantee that the bus format on the connector at the output of the pipeline matches the output of the sn65dsi83, as there may be other bridges in the pipeline. Solve this by retrieving the format from the bridge state instead, which provides the format corresponding to the output of the bridge. The struct sn65dsi83 lvds_format_24bpp and lvds_format_jeida fields are moved to local variables in sn65dsi83_atomic_enable() as they're now used in that function only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-5-laurent.pinchart@ideasonboard.com
2021-06-22drm: bridge: ti-sn65dsi83: Switch to atomic operationsLaurent Pinchart1-11/+15
Use the atomic version of the enable/disable operations to continue the transition to the atomic API, started with the introduction of .atomic_get_input_bus_fmts(). This will be needed to access the mode from the atomic state. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-4-laurent.pinchart@ideasonboard.com
2021-06-22drm: bridge: ti-sn65dsi83: Pass mode explicitly to helper functionsLaurent Pinchart1-6/+8
Pass the display mode explicitly to the sn65dsi83_get_lvds_range() and sn65dsi83_get_dsi_range() functions to prepare for its removal from the sn65dsi83 structure. This is not meant to bring any functional change. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-3-laurent.pinchart@ideasonboard.com
2021-06-22drm: bridge: ti-sn65dsi83: Move LVDS format selection to .mode_set()Laurent Pinchart1-12/+2
The LVDS format is selected based on the bus format reported by the connector. This is currently done in .mode_fixup(), but that's not the right place, as the format should be selected when setting the mode. Move it to .mode_set(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-2-laurent.pinchart@ideasonboard.com
2021-06-21drm/bridge: ti-sn65dsi83: Replace connector format patching with ↵Marek Vasut1-4/+31
atomic_get_input_bus_fmts Patching the connector format is causing various problematic side effects. Implement .atomic_get_input_bus_fmts callback instead, which sets up the input (DSI-end) format, and that format can then be used in pipeline format negotiation between the DSI-end of this bridge and the other component closer to the scanout engine. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224208.184719-1-marex@denx.de
2021-06-18drm/bridge: anx7625: Make hpd workqueue freezablePi-Hsun Shih1-2/+2
There were still a race condition between hpd work and suspend, since the workqueue work can still be run after anx7625 had powered off in suspend. Since we never want hpd work to run while suspending, and there's no harm to delay them to be run after resume, mark the workqueue as WQ_FREEZABLE so all works won't run while suspending. Fixes: 409776fa3c42 ("drm/bridge: anx7625: add suspend / resume hooks") Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210615032937.2328468-1-pihsun@chromium.org
2021-06-16drivers: gpu: add missing MODULE_DEVICE_TABLE in anx7625.cYu Jiahua1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Signed-off-by: Yu Jiahua <yujiahua1@huawei.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210616034448.34919-1-yujiahua1@huawei.com
2021-06-11drm/bridge: ti-sn65dsi86: Improve probe errors with dev_err_probe()Douglas Anderson1-18/+13
As I was testing to make sure that the DEFER path worked well with my patch series, I got tired of seeing this scary message in my logs just because the panel needed to defer: [drm:ti_sn_bridge_probe] *ERROR* could not find any panel node Let's use dev_err_probe() which nicely quiets this error and also simplifies the code a tiny bit. We'll also update other places in the file which can use dev_err_probe(). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.10.I24bba069e63b1eea84443eef0c8535fd032a6311@changeid
2021-06-11drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDCDouglas Anderson1-22/+0
This is really just a revert of commit 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts. The old code failed to read the EDID properly in a very important case: before the bridge's pre_enable() was called. The way things need to work: 1. Read the EDID. 2. Based on the EDID, decide on video settings and pixel clock. 3. Enable the bridge w/ the desired settings. The way things were working: 1. Try to read the EDID but fail; fall back to hardcoded values. 2. Based on hardcoded values, decide on video settings and pixel clock. 3. Enable the bridge w/ the desired settings. 4. Try again to read the EDID, it works now! 5. Realize that the hardcoded settings weren't quite right. 6. Disable / reenable the bridge w/ the right settings. The reasons for the failures were twofold: a) Since we never ran the bridge chip's pre-enable then we never set the bit to ignore HPD. This meant the bridge chip didn't even _try_ to go out on the bus and communicate with the panel. b) Even if we fixed things to ignore HPD, the EDID still wouldn't read if the panel wasn't on. Instead of reverting the code, we could fix it to set the HPD bit and also power on the panel. However, it also works nicely to just let the panel code read the EDID. Now that we've split the driver up we can expose the DDC AUX channel bus to the panel node. The panel can take charge of reading the EDID. NOTE: in order for things to work, anyone that needs to read the EDID will need to instantiate their panel using the new DP AUX bus (AKA by listing their panel under the "aux-bus" node of the bridge chip in the device tree). In the future if we want to use the bridge chip to provide a full external DP port (which won't have a panel) then we will have to conditinally add EDID reading back in. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c25f65bb318eff57f0616500f83eac3cc@changeid
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-28 22:19:02 +0300