summaryrefslogtreecommitdiff
path: root/arch/x86/include/uapi/asm
AgeCommit message (Collapse)AuthorFilesLines
2021-08-20KVM: x86: implement KVM_GUESTDBG_BLOCKIRQMaxim Levitsky1-0/+1
KVM_GUESTDBG_BLOCKIRQ will allow KVM to block all interrupts while running. This change is mostly intended for more robust single stepping of the guest and it has the following benefits when enabled: * Resuming from a breakpoint is much more reliable. When resuming execution from a breakpoint, with interrupts enabled, more often than not, KVM would inject an interrupt and make the CPU jump immediately to the interrupt handler and eventually return to the breakpoint, to trigger it again. From the user point of view it looks like the CPU never executed a single instruction and in some cases that can even prevent forward progress, for example, when the breakpoint is placed by an automated script (e.g lx-symbols), which does something in response to the breakpoint and then continues the guest automatically. If the script execution takes enough time for another interrupt to arrive, the guest will be stuck on the same breakpoint RIP forever. * Normal single stepping is much more predictable, since it won't land the debugger into an interrupt handler. * RFLAGS.TF has less chance to be leaked to the guest: We set that flag behind the guest's back to do single stepping but if single step lands us into an interrupt/exception handler it will be leaked to the guest in the form of being pushed to the stack. This doesn't completely eliminate this problem as exceptions can still happen, but at least this reduces the chances of this happening. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210811122927.900604-6-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-07Merge tag 'x86-fpu-2021-07-07' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu updates from Thomas Gleixner: "Fixes and improvements for FPU handling on x86: - Prevent sigaltstack out of bounds writes. The kernel unconditionally writes the FPU state to the alternate stack without checking whether the stack is large enough to accomodate it. Check the alternate stack size before doing so and in case it's too small force a SIGSEGV instead of silently corrupting user space data. - MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never been updated despite the fact that the FPU state which is stored on the signal stack has grown over time which causes trouble in the field when AVX512 is available on a CPU. The kernel does not expose the minimum requirements for the alternate stack size depending on the available and enabled CPU features. ARM already added an aux vector AT_MINSIGSTKSZ for the same reason. Add it to x86 as well. - A major cleanup of the x86 FPU code. The recent discoveries of XSTATE related issues unearthed quite some inconsistencies, duplicated code and other issues. The fine granular overhaul addresses this, makes the code more robust and maintainable, which allows to integrate upcoming XSTATE related features in sane ways" * tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again x86/fpu/signal: Let xrstor handle the features to init x86/fpu/signal: Handle #PF in the direct restore path x86/fpu: Return proper error codes from user access functions x86/fpu/signal: Split out the direct restore code x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing() x86/fpu/signal: Sanitize the xstate check on sigframe x86/fpu/signal: Remove the legacy alignment check x86/fpu/signal: Move initial checks into fpu__restore_sig() x86/fpu: Mark init_fpstate __ro_after_init x86/pkru: Remove xstate fiddling from write_pkru() x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate() x86/fpu: Remove PKRU handling from switch_fpu_finish() x86/fpu: Mask PKRU from kernel XRSTOR[S] operations x86/fpu: Hook up PKRU into ptrace() x86/fpu: Add PKRU storage outside of task XSAVE buffer x86/fpu: Dont restore PKRU in fpregs_restore_userspace() x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi() x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs() x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs() ...
2021-06-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-0/+29
Pull kvm updates from Paolo Bonzini: "This covers all architectures (except MIPS) so I don't expect any other feature pull requests this merge window. ARM: - Add MTE support in guests, complete with tag save/restore interface - Reduce the impact of CMOs by moving them in the page-table code - Allow device block mappings at stage-2 - Reduce the footprint of the vmemmap in protected mode - Support the vGIC on dumb systems such as the Apple M1 - Add selftest infrastructure to support multiple configuration and apply that to PMU/non-PMU setups - Add selftests for the debug architecture - The usual crop of PMU fixes PPC: - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes S390: - new HW facilities for guests - make inline assembly more robust with KASAN and co x86: - Allow userspace to handle emulation errors (unknown instructions) - Lazy allocation of the rmap (host physical -> guest physical address) - Support for virtualizing TSC scaling on VMX machines - Optimizations to avoid shattering huge pages at the beginning of live migration - Support for initializing the PDPTRs without loading them from memory - Many TLB flushing cleanups - Refuse to load if two-stage paging is available but NX is not (this has been a requirement in practice for over a year) - A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from CR0/CR4/EFER, using the MMU mode everywhere once it is computed from the CPU registers - Use PM notifier to notify the guest about host suspend or hibernate - Support for passing arguments to Hyper-V hypercalls using XMM registers - Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on AMD processors - Hide Hyper-V hypercalls that are not included in the guest CPUID - Fixes for live migration of virtual machines that use the Hyper-V "enlightened VMCS" optimization of nested virtualization - Bugfixes (not many) Generic: - Support for retrieving statistics without debugfs - Cleanups for the KVM selftests API" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits) KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled kvm: x86: disable the narrow guest module parameter on unload selftests: kvm: Allows userspace to handle emulation errors. kvm: x86: Allow userspace to handle emulation errors KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic KVM: x86: Enhance comments for MMU roles and nested transition trickiness KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU KVM: x86/mmu: Use MMU's role to determine PTTYPE KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers KVM: x86/mmu: Add a helper to calculate root from role_regs KVM: x86/mmu: Add helper to update paging metadata KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0 KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper KVM: x86/mmu: Get nested MMU's root level from the MMU's role ...
2021-06-17KVM: X86: Introduce KVM_HC_MAP_GPA_RANGE hypercallAshish Kalra1-0/+13
This hypercall is used by the SEV guest to notify a change in the page encryption status to the hypervisor. The hypercall should be invoked only when the encryption attribute is changed from encrypted -> decrypted and vice versa. By default all guest pages are considered encrypted. The hypercall exits to userspace to manage the guest shared regions and integrate with the userspace VMM's migration code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <90778988e1ee01926ff9cac447aacb745f954c8c.1623174621.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2Maxim Levitsky1-0/+13
This is a new version of KVM_GET_SREGS / KVM_SET_SREGS. It has the following changes: * Has flags for future extensions * Has vcpu's PDPTRs, allowing to save/restore them on migration. * Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS) New capability, KVM_CAP_SREGS2 is added to signal the userspace of this ioctl. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210607090203.133058-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: SVM: Software reserved fieldsVineeth Pillai1-0/+3
SVM added support for certain reserved fields to be used by software or hypervisor. Add the following reserved fields: - VMCB offset 0x3e0 - 0x3ff - Clean bit 31 - SVM intercept exit code 0xf0000000 Later patches will make use of this for supporting Hyper-V nested virtualization enhancements. Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com> Message-Id: <a1f17a43a8e9e751a1a9cc0281649d71bdbf721b.1622730232.git.viremana@linux.microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-21x86/elf: Use _BITUL() macro in UAPI headersJoe Richey1-2/+4
Replace BIT() in x86's UAPI header with _BITUL(). BIT() is not defined in the UAPI headers and its usage may cause userspace build errors. Fixes: 742c45c3ecc9 ("x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2") Signed-off-by: Joe Richey <joerichey@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210521085849.37676-2-joerichey94@gmail.com
2021-05-19x86/elf: Support a new ELF aux vector AT_MINSIGSTKSZChang S. Bae1-2/+2
Historically, signal.h defines MINSIGSTKSZ (2KB) and SIGSTKSZ (8KB), for use by all architectures with sigaltstack(2). Over time, the hardware state size grew, but these constants did not evolve. Today, literal use of these constants on several architectures may result in signal stack overflow, and thus user data corruption. A few years ago, the ARM team addressed this issue by establishing getauxval(AT_MINSIGSTKSZ). This enables the kernel to supply a value at runtime that is an appropriate replacement on current and future hardware. Add getauxval(AT_MINSIGSTKSZ) support to x86, analogous to the support added for ARM in 94b07c1f8c39 ("arm64: signal: Report signal frame size to userspace via auxv"). Also, include a documentation to describe x86-specific auxiliary vectors. Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Len Brown <len.brown@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20210518200320.17239-4-chang.seok.bae@intel.com
2021-05-07KVM: nVMX: Properly pad 'struct kvm_vmx_nested_state_hdr'Vitaly Kuznetsov1-0/+2
Eliminate the probably unwanted hole in 'struct kvm_vmx_nested_state_hdr': Pre-patch: struct kvm_vmx_nested_state_hdr { __u64 vmxon_pa; /* 0 8 */ __u64 vmcs12_pa; /* 8 8 */ struct { __u16 flags; /* 16 2 */ } smm; /* 16 2 */ /* XXX 2 bytes hole, try to pack */ __u32 flags; /* 20 4 */ __u64 preemption_timer_deadline; /* 24 8 */ }; Post-patch: struct kvm_vmx_nested_state_hdr { __u64 vmxon_pa; /* 0 8 */ __u64 vmcs12_pa; /* 8 8 */ struct { __u16 flags; /* 16 2 */ } smm; /* 16 2 */ __u16 pad; /* 18 2 */ __u32 flags; /* 20 4 */ __u64 preemption_timer_deadline; /* 24 8 */ }; Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210503150854.1144255-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-26Merge tag 'x86-splitlock-2021-04-26' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bus lock detection updates from Thomas Gleixner: "Support for enhanced split lock detection: Newer CPUs provide a second mechanism to detect operations with lock prefix which go accross a cache line boundary. Such operations have to take bus lock which causes a system wide performance degradation when these operations happen frequently. The new mechanism is not using the #AC exception. It triggers #DB and is restricted to operations in user space. Kernel side split lock access can only be detected by the #AC based variant. Contrary to the #AC based mechanism the #DB based variant triggers _after_ the instruction was executed. The mechanism is CPUID enumerated and contrary to the #AC version which is based on the magic TEST_CTRL_MSR and model/family based enumeration on the way to become architectural" * tag 'x86-splitlock-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/admin-guide: Change doc for split_lock_detect parameter x86/traps: Handle #DB for bus lock x86/cpufeatures: Enumerate #DB for bus lock detection
2021-04-20KVM: VMX: Add basic handling of VM-Exit from SGX enclaveSean Christopherson1-0/+1
Add support for handling VM-Exits that originate from a guest SGX enclave. In SGX, an "enclave" is a new CPL3-only execution environment, wherein the CPU and memory state is protected by hardware to make the state inaccesible to code running outside of the enclave. When exiting an enclave due to an asynchronous event (from the perspective of the enclave), e.g. exceptions, interrupts, and VM-Exits, the enclave's state is automatically saved and scrubbed (the CPU loads synthetic state), and then reloaded when re-entering the enclave. E.g. after an instruction based VM-Exit from an enclave, vmcs.GUEST_RIP will not contain the RIP of the enclave instruction that trigered VM-Exit, but will instead point to a RIP in the enclave's untrusted runtime (the guest userspace code that coordinates entry/exit to/from the enclave). To help a VMM recognize and handle exits from enclaves, SGX adds bits to existing VMCS fields, VM_EXIT_REASON.VMX_EXIT_REASON_FROM_ENCLAVE and GUEST_INTERRUPTIBILITY_INFO.GUEST_INTR_STATE_ENCLAVE_INTR. Define the new architectural bits, and add a boolean to struct vcpu_vmx to cache VMX_EXIT_REASON_FROM_ENCLAVE. Clear the bit in exit_reason so that checks against exit_reason do not need to account for SGX, e.g. "if (exit_reason == EXIT_REASON_EXCEPTION_NMI)" continues to work. KVM is a largely a passive observer of the new bits, e.g. KVM needs to account for the bits when propagating information to a nested VMM, but otherwise doesn't need to act differently for the majority of VM-Exits from enclaves. The one scenario that is directly impacted is emulation, which is for all intents and purposes impossible[1] since KVM does not have access to the RIP or instruction stream that triggered the VM-Exit. The inability to emulate is a non-issue for KVM, as most instructions that might trigger VM-Exit unconditionally #UD in an enclave (before the VM-Exit check. For the few instruction that conditionally #UD, KVM either never sets the exiting control, e.g. PAUSE_EXITING[2], or sets it if and only if the feature is not exposed to the guest in order to inject a #UD, e.g. RDRAND_EXITING. But, because it is still possible for a guest to trigger emulation, e.g. MMIO, inject a #UD if KVM ever attempts emulation after a VM-Exit from an enclave. This is architecturally accurate for instruction VM-Exits, and for MMIO it's the least bad choice, e.g. it's preferable to killing the VM. In practice, only broken or particularly stupid guests should ever encounter this behavior. Add a WARN in skip_emulated_instruction to detect any attempt to modify the guest's RIP during an SGX enclave VM-Exit as all such flows should either be unreachable or must handle exits from enclaves before getting to skip_emulated_instruction. [1] Impossible for all practical purposes. Not truly impossible since KVM could implement some form of para-virtualization scheme. [2] PAUSE_LOOP_EXITING only affects CPL0 and enclaves exist only at CPL3, so we also don't need to worry about that interaction. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@intel.com> Message-Id: <315f54a8507d09c292463ef29104e1d4c62e9090.1618196135.git.kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-28x86/traps: Handle #DB for bus lockFenghua Yu1-0/+1
Bus locks degrade performance for the whole system, not just for the CPU that requested the bus lock. Two CPU features "#AC for split lock" and "#DB for bus lock" provide hooks so that the operating system may choose one of several mitigation strategies. #AC for split lock is already implemented. Add code to use the #DB for bus lock feature to cover additional situations with new options to mitigate. split_lock_detect= #AC for split lock #DB for bus lock off Do nothing Do nothing warn Kernel OOPs Warn once per task and Warn once per task and and continues to run. disable future checking When both features are supported, warn in #AC fatal Kernel OOPs Send SIGBUS to user. Send SIGBUS to user When both features are supported, fatal in #AC ratelimit:N Do nothing Limit bus lock rate to N per second in the current non-root user. Default option is "warn". Hardware only generates #DB for bus lock detect when CPL>0 to avoid nested #DB from multiple bus locks while the first #DB is being handled. So no need to handle #DB for bus lock detected in the kernel. #DB for bus lock is enabled by bus lock detection bit 2 in DEBUGCTL MSR while #AC for split lock is enabled by split lock detection bit 29 in TEST_CTRL MSR. Both breakpoint and bus lock in the same instruction can trigger one #DB. The bus lock is handled before the breakpoint in the #DB handler. Delivery of #DB for bus lock in userspace clears DR6[11], which is set by the #DB handler right after reading DR6. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210322135325.682257-3-fenghua.yu@intel.com
2021-03-18x86: Fix various typos in commentsIngo Molnar5-6/+6
Fix ~144 single-word typos in arch/x86/ code comments. Doing this in a single commit should reduce the churn. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org
2021-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+4
Pull KVM updates from Paolo Bonzini: "x86: - Support for userspace to emulate Xen hypercalls - Raise the maximum number of user memslots - Scalability improvements for the new MMU. Instead of the complex "fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent, but the code that can run against page faults is limited. Right now only page faults take the lock for reading; in the future this will be extended to some cases of page table destruction. I hope to switch the default MMU around 5.12-rc3 (some testing was delayed due to Chinese New Year). - Cleanups for MAXPHYADDR checks - Use static calls for vendor-specific callbacks - On AMD, use VMLOAD/VMSAVE to save and restore host state - Stop using deprecated jump label APIs - Workaround for AMD erratum that made nested virtualization unreliable - Support for LBR emulation in the guest - Support for communicating bus lock vmexits to userspace - Add support for SEV attestation command - Miscellaneous cleanups PPC: - Support for second data watchpoint on POWER10 - Remove some complex workarounds for buggy early versions of POWER9 - Guest entry/exit fixes ARM64: - Make the nVHE EL2 object relocatable - Cleanups for concurrent translation faults hitting the same page - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Simplification of the early init hypercall handling Non-KVM changes (with acks): - Detection of contended rwlocks (implemented only for qrwlocks, because KVM only needs it for x86) - Allow __DISABLE_EXPORTS from assembly code - Provide a saner follow_pfn replacements for modules" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits) KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes KVM: selftests: Don't bother mapping GVA for Xen shinfo test KVM: selftests: Fix hex vs. decimal snafu in Xen test KVM: selftests: Fix size of memslots created by Xen tests KVM: selftests: Ignore recently added Xen tests' build output KVM: selftests: Add missing header file needed by xAPIC IPI tests KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static locking/arch: Move qrwlock.h include after qspinlock.h KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2 KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path KVM: PPC: remove unneeded semicolon KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest KVM: PPC: Book3S HV: Fix radix guest SLB side channel KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR ...
2021-02-04KVM: VMX: Enable bus lock VM exitChenyi Qiang2-1/+4
Virtual Machine can exploit bus locks to degrade the performance of system. Bus lock can be caused by split locked access to writeback(WB) memory or by using locks on uncacheable(UC) memory. The bus lock is typically >1000 cycles slower than an atomic operation within a cache line. It also disrupts performance on other cores (which must wait for the bus lock to be released before their memory operations can complete). To address the threat, bus lock VM exit is introduced to notify the VMM when a bus lock was acquired, allowing it to enforce throttling or other policy based mitigations. A VMM can enable VM exit due to bus locks by setting a new "Bus Lock Detection" VM-execution control(bit 30 of Secondary Processor-based VM execution controls). If delivery of this VM exit was preempted by a higher priority VM exit (e.g. EPT misconfiguration, EPT violation, APIC access VM exit, APIC write VM exit, exception bitmap exiting), bit 26 of exit reason in vmcs field is set to 1. In current implementation, the KVM exposes this capability through KVM_CAP_X86_BUS_LOCK_EXIT. The user can get the supported mode bitmap (i.e. off and exit) and enable it explicitly (disabled by default). If bus locks in guest are detected by KVM, exit to user space even when current exit reason is handled by KVM internally. Set a new field KVM_RUN_BUS_LOCK in vcpu->run->flags to inform the user space that there is a bus lock detected in guest. Document for Bus Lock VM exit is now available at the latest "Intel Architecture Instruction Set Extensions Programming Reference". Document Link: https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20201106090315.18606-4-chenyi.qiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-21x86/vm86/32: Remove VM86_SCREEN_BITMAP supportAndy Lutomirski1-2/+2
The implementation was rather buggy. It unconditionally marked PTEs read-only, even for VM_SHARED mappings. I'm not sure whether this is actually a problem, but it certainly seems unwise. More importantly, it released the mmap lock before flushing the TLB, which could allow a racing CoW operation to falsely believe that the underlying memory was not writable. I can't find any users at all of this mechanism, so just remove it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Stas Sergeev <stsp2@yandex.ru> Link: https://lkml.kernel.org/r/f3086de0babcab36f69949b5780bde851f719bc8.1611078018.git.luto@kernel.org
2020-12-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-0/+31
Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ...
2020-12-15KVM: SVM: Add support for CR8 write traps for an SEV-ES guestTom Lendacky1-0/+1
For SEV-ES guests, the interception of control register write access is not recommended. Control register interception occurs prior to the control register being modified and the hypervisor is unable to modify the control register itself because the register is located in the encrypted register state. SEV-ES guests introduce new control register write traps. These traps provide intercept support of a control register write after the control register has been modified. The new control register value is provided in the VMCB EXITINFO1 field, allowing the hypervisor to track the setting of the guest control registers. Add support to track the value of the guest CR8 register using the control register write trap so that the hypervisor understands the guest operating mode. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <5a01033f4c8b3106ca9374b7cadf8e33da852df1.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Add support for CR4 write traps for an SEV-ES guestTom Lendacky1-0/+1
For SEV-ES guests, the interception of control register write access is not recommended. Control register interception occurs prior to the control register being modified and the hypervisor is unable to modify the control register itself because the register is located in the encrypted register state. SEV-ES guests introduce new control register write traps. These traps provide intercept support of a control register write after the control register has been modified. The new control register value is provided in the VMCB EXITINFO1 field, allowing the hypervisor to track the setting of the guest control registers. Add support to track the value of the guest CR4 register using the control register write trap so that the hypervisor understands the guest operating mode. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <c3880bf2db8693aa26f648528fbc6e967ab46e25.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Add support for CR0 write traps for an SEV-ES guestTom Lendacky1-0/+17
For SEV-ES guests, the interception of control register write access is not recommended. Control register interception occurs prior to the control register being modified and the hypervisor is unable to modify the control register itself because the register is located in the encrypted register state. SEV-ES support introduces new control register write traps. These traps provide intercept support of a control register write after the control register has been modified. The new control register value is provided in the VMCB EXITINFO1 field, allowing the hypervisor to track the setting of the guest control registers. Add support to track the value of the guest CR0 register using the control register write trap so that the hypervisor understands the guest operating mode. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <182c9baf99df7e40ad9617ff90b84542705ef0d7.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Add support for EFER write traps for an SEV-ES guestTom Lendacky1-0/+2
For SEV-ES guests, the interception of EFER write access is not recommended. EFER interception occurs prior to EFER being modified and the hypervisor is unable to modify EFER itself because the register is located in the encrypted register state. SEV-ES support introduces a new EFER write trap. This trap provides intercept support of an EFER write after it has been modified. The new EFER value is provided in the VMCB EXITINFO1 field, allowing the hypervisor to track the setting of the guest EFER. Add support to track the value of the guest EFER value using the EFER write trap so that the hypervisor understands the guest operating mode. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <8993149352a3a87cd0625b3b61bfd31ab28977e1.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Add initial support for a VMGEXIT VMEXITTom Lendacky1-0/+7
SEV-ES adds a new VMEXIT reason code, VMGEXIT. Initial support for a VMGEXIT includes mapping the GHCB based on the guest GPA, which is obtained from a new VMCB field, and then validating the required inputs for the VMGEXIT exit reason. Since many of the VMGEXIT exit reasons correspond to existing VMEXIT reasons, the information from the GHCB is copied into the VMCB control exit code areas and KVM register areas. The standard exit handlers are invoked, similar to standard VMEXIT processing. Before restarting the vCPU, the GHCB is updated with any registers that have been updated by the hypervisor. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <c6a4ed4294a369bd75c44d03bd7ce0f0c3840e50.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15Merge tag 'arm64-upstream' of ↵Linus Torvalds1-24/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Expose tag address bits in siginfo. The original arm64 ABI did not expose any of the bits 63:56 of a tagged address in siginfo. In the presence of user ASAN or MTE, this information may be useful. The implementation is generic to other architectures supporting tags (like SPARC ADI, subject to wiring up the arch code). The user will have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if available, become visible in si_addr. - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the lowest 1GB to cope with the Raspberry Pi 4 limitations, to the detriment of other platforms. With these changes, the kernel scans the Device Tree dma-ranges and the ACPI IORT information before deciding on a smaller ZONE_DMA. - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building with LTO, there is an increased risk of the compiler converting an address dependency headed by a READ_ONCE() invocation into a control dependency and consequently allowing for harmful reordering by the CPU. - Add CPPC FFH support using arm64 AMU counters. - set_fs() removal on arm64. This renders the User Access Override (UAO) ARMv8 feature unnecessary. - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs identifier file for SMMUv3, stop event counters support for i.MX8MP, enable the perf events-based hard lockup detector. - Reorganise the kernel VA space slightly so that 52-bit VA configurations can use more virtual address space. - Improve the robustness of the arm64 memory offline event notifier. - Pad the Image header to 64K following the EFI header definition updated recently to increase the section alignment to 64K. - Support CONFIG_CMDLINE_EXTEND on arm64. - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8 bits for PtrAuth. - Switch to vmapped shadow call stacks. - Miscellaneous clean-ups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits) perf/imx_ddr: Add system PMU identifier for userspace bindings: perf: imx-ddr: add compatible string arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mark __system_matches_cap as __maybe_unused arm64: uaccess: remove vestigal UAO support arm64: uaccess: remove redundant PAN toggling arm64: uaccess: remove addr_limit_user_check() arm64: uaccess: remove set_fs() arm64: uaccess cleanup macro naming arm64: uaccess: split user/kernel routines arm64: uaccess: refactor __{get,put}_user arm64: uaccess: simplify __copy_user_flushcache() arm64: uaccess: rename privileged uaccess routines arm64: sdei: explicitly simulate PAN/UAO entry arm64: sdei: move uaccess logic to arch/arm64/ arm64: head.S: always initialize PSTATE arm64: head.S: cleanup SCTLR_ELx initialization arm64: head.S: rename el2_setup -> init_kernel_el arm64: add C wrappers for SET_PSTATE_*() ...
2020-12-02x86/sgx: Fix a typo in kernel-doc markupMauro Carvalho Chehab1-1/+1
Fix the following kernel-doc warning: arch/x86/include/uapi/asm/sgx.h:19: warning: expecting prototype \ for enum sgx_epage_flags. Prototype was for enum sgx_page_flags instead [ bp: Launder the commit message. ] Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/ca11a4540d981cbd5f026b6cbc8931aa55654e00.1606897462.git.mchehab+huawei@kernel.org
2020-11-23arch: move SA_* definitions to generic headersPeter Collingbourne1-24/+0
Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-18x86/vdso: Implement a vDSO for Intel SGX enclave callSean Christopherson1-0/+91
Enclaves encounter exceptions for lots of reasons: everything from enclave page faults to NULL pointer dereferences, to system calls that must be “proxied” to the kernel from outside the enclave. In addition to the code contained inside an enclave, there is also supporting code outside the enclave called an “SGX runtime”, which is virtually always implemented inside a shared library. The runtime helps build the enclave and handles things like *re*building the enclave if it got destroyed by something like a suspend/resume cycle. The rebuilding has traditionally been handled in SIGSEGV handlers, registered by the library. But, being process-wide, shared state, signal handling and shared libraries do not mix well. Introduce a vDSO function call that wraps the enclave entry functions (EENTER/ERESUME functions of the ENCLU instruciton) and returns information about any exceptions to the caller in the SGX runtime. Instead of generating a signal, the kernel places exception information in RDI, RSI and RDX. The kernel-provided userspace portion of the vDSO handler will place this information in a user-provided buffer or trigger a user-provided callback at the time of the exception. The vDSO function calling convention uses the standard RDI RSI, RDX, RCX, R8 and R9 registers. This makes it possible to declare the vDSO as a C prototype, but other than that there is no specific support for SystemV ABI. Things like storing XSAVE are the responsibility of the enclave and the runtime. [ bp: Change vsgx.o build dependency to CONFIG_X86_SGX. ] Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Cedric Xing <cedric.xing@intel.com> Signed-off-by: Cedric Xing <cedric.xing@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-20-jarkko@kernel.org
2020-11-18x86/sgx: Add SGX_IOC_ENCLAVE_PROVISIONJarkko Sakkinen1-0/+11
The whole point of SGX is to create a hardware protected place to do “stuff”. But, before someone is willing to hand over the keys to the castle , an enclave must often prove that it is running on an SGX-protected processor. Provisioning enclaves play a key role in providing proof. There are actually three different enclaves in play in order to make this happen: 1. The application enclave. The familiar one we know and love that runs the actual code that’s doing real work. There can be many of these on a single system, or even in a single application. 2. The quoting enclave (QE). The QE is mentioned in lots of silly whitepapers, but, for the purposes of kernel enabling, just pretend they do not exist. 3. The provisioning enclave. There is typically only one of these enclaves per system. Provisioning enclaves have access to a special hardware key. They can use this key to help to generate certificates which serve as proof that enclaves are running on trusted SGX hardware. These certificates can be passed around without revealing the special key. Any user who can create a provisioning enclave can access the processor-unique Provisioning Certificate Key which has privacy and fingerprinting implications. Even if a user is permitted to create normal application enclaves (via /dev/sgx_enclave), they should not be able to create provisioning enclaves. That means a separate permissions scheme is needed to control provisioning enclave privileges. Implement a separate device file (/dev/sgx_provision) which allows creating provisioning enclaves. This device will typically have more strict permissions than the plain enclave device. The actual device “driver” is an empty stub. Open file descriptors for this device will represent a token which allows provisioning enclave duty. This file descriptor can be passed around and ultimately given as an argument to the /dev/sgx_enclave driver ioctl(). [ bp: Touchups. ] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-security-module@vger.kernel.org Link: https://lkml.kernel.org/r/20201112220135.165028-16-jarkko@kernel.org
2020-11-18x86/sgx: Add SGX_IOC_ENCLAVE_INITJarkko Sakkinen1-0/+11
Enclaves have two basic states. They are either being built and are malleable and can be modified by doing things like adding pages. Or, they are locked down and not accepting changes. They can only be run after they have been locked down. The ENCLS[EINIT] function induces the transition from being malleable to locked-down. Add an ioctl() that performs ENCLS[EINIT]. After this, new pages can no longer be added with ENCLS[EADD]. This is also the time where the enclave can be measured to verify its integrity. Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-15-jarkko@kernel.org
2020-11-18x86/sgx: Add SGX_IOC_ENCLAVE_ADD_PAGESJarkko Sakkinen1-0/+30
SGX enclave pages are inaccessible to normal software. They must be populated with data by copying from normal memory with the help of the EADD and EEXTEND functions of the ENCLS instruction. Add an ioctl() which performs EADD that adds new data to an enclave, and optionally EEXTEND functions that hash the page contents and use the hash as part of enclave “measurement” to ensure enclave integrity. The enclave author gets to decide which pages will be included in the enclave measurement with EEXTEND. Measurement is very slow and has sometimes has very little value. For instance, an enclave _could_ measure every page of data and code, but would be slow to initialize. Or, it might just measure its code and then trust that code to initialize the bulk of its data after it starts running. Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-14-jarkko@kernel.org
2020-11-18x86/sgx: Add SGX_IOC_ENCLAVE_CREATEJarkko Sakkinen1-0/+25
Add an ioctl() that performs the ECREATE function of the ENCLS instruction, which creates an SGX Enclave Control Structure (SECS). Although the SECS is an in-memory data structure, it is present in enclave memory and is not directly accessible by software. Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-13-jarkko@kernel.org
2020-11-15KVM: X86: Implement ring-based dirty memory trackingPeter Xu1-0/+1
This patch is heavily based on previous work from Lei Cao <lei.cao@stratus.com> and Paolo Bonzini <pbonzini@redhat.com>. [1] KVM currently uses large bitmaps to track dirty memory. These bitmaps are copied to userspace when userspace queries KVM for its dirty page information. The use of bitmaps is mostly sufficient for live migration, as large parts of memory are be dirtied from one log-dirty pass to another. However, in a checkpointing system, the number of dirty pages is small and in fact it is often bounded---the VM is paused when it has dirtied a pre-defined number of pages. Traversing a large, sparsely populated bitmap to find set bits is time-consuming, as is copying the bitmap to user-space. A similar issue will be there for live migration when the guest memory is huge while the page dirty procedure is trivial. In that case for each dirty sync we need to pull the whole dirty bitmap to userspace and analyse every bit even if it's mostly zeros. The preferred data structure for above scenarios is a dense list of guest frame numbers (GFN). This patch series stores the dirty list in kernel memory that can be memory mapped into userspace to allow speedy harvesting. This patch enables dirty ring for X86 only. However it should be easily extended to other archs as well. [1] https://patchwork.kernel.org/patch/10471409/ Signed-off-by: Lei Cao <lei.cao@stratus.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201001012222.5767-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15KVM: x86: emulate wait-for-SIPI and SIPI-VMExitYadong Qi1-0/+2
Background: We have a lightweight HV, it needs INIT-VMExit and SIPI-VMExit to wake-up APs for guests since it do not monitor the Local APIC. But currently virtual wait-for-SIPI(WFS) state is not supported in nVMX, so when running on top of KVM, the L1 HV cannot receive the INIT-VMExit and SIPI-VMExit which cause the L2 guest cannot wake up the APs. According to Intel SDM Chapter 25.2 Other Causes of VM Exits, SIPIs cause VM exits when a logical processor is in wait-for-SIPI state. In this patch: 1. introduce SIPI exit reason, 2. introduce wait-for-SIPI state for nVMX, 3. advertise wait-for-SIPI support to guest. When L1 hypervisor is not monitoring Local APIC, L0 need to emulate INIT-VMExit and SIPI-VMExit to L1 to emulate INIT-SIPI-SIPI for L2. L2 LAPIC write would be traped by L0 Hypervisor(KVM), L0 should emulate the INIT/SIPI vmexit to L1 hypervisor to set proper state for L2's vcpu state. Handle procdure: Source vCPU: L2 write LAPIC.ICR(INIT). L0 trap LAPIC.ICR write(INIT): inject a latched INIT event to target vCPU. Target vCPU: L0 emulate an INIT VMExit to L1 if is guest mode. L1 set guest VMCS, guest_activity_state=WAIT_SIPI, vmresume. L0 set vcpu.mp_state to INIT_RECEIVED if (vmcs12.guest_activity_state == WAIT_SIPI). Source vCPU: L2 write LAPIC.ICR(SIPI). L0 trap LAPIC.ICR write(INIT): inject a latched SIPI event to traget vCPU. Target vCPU: L0 emulate an SIPI VMExit to L1 if (vcpu.mp_state == INIT_RECEIVED). L1 set CS:IP, guest_activity_state=ACTIVE, vmresume. L0 resume to L2. L2 start-up. Signed-off-by: Yadong Qi <yadong.qi@intel.com> Message-Id: <20200922052343.84388-1-yadong.qi@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201106065122.403183-1-yadong.qi@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-28x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_IDDavid Woodhouse1-0/+1
No functional change; just reserve the feature bit for now so that VMMs can start to implement it. This will allow the host to indicate that MSI emulation supports 15-bit destination IDs, allowing up to 32768 CPUs without interrupt remapping. cf. https://patchwork.kernel.org/patch/11816693/ for qemu Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <4cd59bed05f4b7410d3d1ffd1e997ab53683874d.camel@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-0/+22
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
2020-09-28KVM: x86: Introduce MSR filteringAlexander Graf1-0/+18
It's not desireable to have all MSRs always handled by KVM kernel space. Some MSRs would be useful to handle in user space to either emulate behavior (like uCode updates) or differentiate whether they are valid based on the CPU model. To allow user space to specify which MSRs it wants to see handled by KVM, this patch introduces a new ioctl to push filter rules with bitmaps into KVM. Based on these bitmaps, KVM can then decide whether to reject MSR access. With the addition of KVM_CAP_X86_USER_SPACE_MSR it can also deflect the denied MSR events to user space to operate on. If no filter is populated, MSR handling stays identical to before. Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20200925143422.21718-8-graf@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Add infrastructure for MSR filteringAlexander Graf1-0/+2
In the following commits we will add pieces of MSR filtering. To ensure that code compiles even with the feature half-merged, let's add a few stubs and struct definitions before the real patches start. Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20200925143422.21718-4-graf@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: SVM: Enable INVPCID feature on AMDBabu Moger1-0/+2
The following intercept bit has been added to support VMEXIT for INVPCID instruction: Code Name Cause A2h VMEXIT_INVPCID INVPCID instruction The following bit has been added to the VMCB layout control area to control intercept of INVPCID: Byte Offset Bit(s) Function 14h 2 intercept INVPCID Enable the interceptions when the the guest is running with shadow page table enabled and handle the tlbflush based on the invpcid instruction type. For the guests with nested page table (NPT) support, the INVPCID feature works as running it natively. KVM does not need to do any special handling in this case. AMD documentation for INVPCID feature is available at "AMD64 Architecture Programmer’s Manual Volume 2: System Programming, Pub. 24593 Rev. 3.34(or later)" The documentation can be obtained at the links below: Link: https://www.amd.com/system/files/TechDocs/24593.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <159985255929.11252.17346684135277453258.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-09x86/sev-es: Handle NMI StateJoerg Roedel1-0/+1
When running under SEV-ES, the kernel has to tell the hypervisor when to open the NMI window again after an NMI was injected. This is done with an NMI-complete message to the hypervisor. Add code to the kernel's NMI handler to send this message right at the beginning of do_nmi(). This always allows nesting NMIs. [ bp: Mark __sev_es_nmi_complete() noinstr: vmlinux.o: warning: objtool: exc_nmi()+0x17: call to __sev_es_nmi_complete() leaves .noinstr.text section While at it, use __pa_nodebug() for the same reason due to CONFIG_DEBUG_VIRTUAL=y: vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xd9: call to __phys_addr() leaves .noinstr.text section ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907131613.12703-71-joro@8bytes.org
2020-09-09x86/sev-es: Support CPU offline/onlineJoerg Roedel1-0/+1
Add a play_dead handler when running under SEV-ES. This is needed because the hypervisor can't deliver an SIPI request to restart the AP. Instead, the kernel has to issue a VMGEXIT to halt the VCPU until the hypervisor wakes it up again. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907131613.12703-70-joro@8bytes.org
2020-09-09x86/realmode: Setup AP jump tableTom Lendacky1-0/+3
As part of the GHCB specification, the booting of APs under SEV-ES requires an AP jump table when transitioning from one layer of code to another (e.g. when going from UEFI to the OS). As a result, each layer that parks an AP must provide the physical address of an AP jump table to the next layer via the hypervisor. Upon booting of the kernel, read the AP jump table address from the hypervisor. Under SEV-ES, APs are started using the INIT-SIPI-SIPI sequence. Before issuing the first SIPI request for an AP, the start CS and IP is programmed into the AP jump table. Upon issuing the SIPI request, the AP will awaken and jump to that start CS:IP address. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> [ jroedel@suse.de: - Adapted to different code base - Moved AP table setup from SIPI sending path to real-mode setup code - Fix sparse warnings ] Co-developed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907131613.12703-67-joro@8bytes.org
2020-09-09x86/sev-es: Handle MMIO eventsTom Lendacky1-0/+5
Add a handler for #VC exceptions caused by MMIO intercepts. These intercepts come along as nested page faults on pages with reserved bits set. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> [ jroedel@suse.de: Adapt to VC handling framework ] Co-developed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907131613.12703-50-joro@8bytes.org
2020-09-07x86/boot/compressed/64: Setup a GHCB-based VC Exception handlerJoerg Roedel1-0/+1
Install an exception handler for #VC exception that uses a GHCB. Also add the infrastructure for handling different exit-codes by decoding the instruction that caused the exception and error handling. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907131613.12703-24-joro@8bytes.org
2020-08-05Merge tag 'x86-fsgsbase-2020-08-04' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fsgsbase from Thomas Gleixner: "Support for FSGSBASE. Almost 5 years after the first RFC to support it, this has been brought into a shape which is maintainable and actually works. This final version was done by Sasha Levin who took it up after Intel dropped the ball. Sasha discovered that the SGX (sic!) offerings out there ship rogue kernel modules enabling FSGSBASE behind the kernels back which opens an instantanious unpriviledged root hole. The FSGSBASE instructions provide a considerable speedup of the context switch path and enable user space to write GSBASE without kernel interaction. This enablement requires careful handling of the exception entries which go through the paranoid entry path as they can no longer rely on the assumption that user GSBASE is positive (as enforced via prctl() on non FSGSBASE enabled systemn). All other entries (syscalls, interrupts and exceptions) can still just utilize SWAPGS unconditionally when the entry comes from user space. Converting these entries to use FSGSBASE has no benefit as SWAPGS is only marginally slower than WRGSBASE and locating and retrieving the kernel GSBASE value is not a free operation either. The real benefit of RD/WRGSBASE is the avoidance of the MSR reads and writes. The changes come with appropriate selftests and have held up in field testing against the (sanitized) Graphene-SGX driver" * tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/fsgsbase: Fix Xen PV support x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase selftests/x86/fsgsbase: Add a missing memory constraint selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write Documentation/x86/64: Add documentation for GS/FS addressing mode x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit x86/entry/64: Introduce the FIND_PERCPU_BASE macro x86/entry/64: Switch CR3 before SWAPGS in paranoid entry x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation x86/process/64: Use FSGSBASE instructions on thread copy and ptrace x86/process/64: Use FSBSBASE in switch_to() if available x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE ...
2020-07-26Merge branch 'x86/urgent' into x86/cleanupsIngo Molnar1-2/+3
Refresh the branch for a dependent commit. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-26x86: bootparam.h: Delete duplicated wordRandy Dunlap1-1/+1
Delete the repeated word "for". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200726004124.20618-2-rdunlap@infradead.org
2020-07-10KVM: nVMX: fixes for preemption timer migrationPaolo Bonzini1-2/+3
Commit 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration", 2020-06-01) accidentally broke nVMX live migration from older version by changing the userspace ABI. Restore it and, while at it, ensure that vmx->nested.has_preemption_timer_deadline is always initialized according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag. Cc: Makarand Sonare <makarandsonare@google.com> Fixes: 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration") Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-18x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2Andi Kleen1-0/+3
The kernel needs to explicitly enable FSGSBASE. So, the application needs to know if it can safely use these instructions. Just looking at the CPUID bit is not enough because it may be running in a kernel that does not enable the instructions. One way for the application would be to just try and catch the SIGILL. But that is difficult to do in libraries which may not want to overwrite the signal handlers of the main application. Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF aux vector. AT_HWCAP2 is already used by PPC for similar purposes. The application can access it open coded or by using the getauxval() function in newer versions of glibc. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1557309753-24073-18-git-send-email-chang.seok.bae@intel.com Link: https://lkml.kernel.org/r/20200528201402.1708239-14-sashal@kernel.org
2020-06-11Merge branch 'x86/entry' into ras/coreThomas Gleixner4-5/+46
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow up patches can be applied without creating a horrible merge conflict afterwards.
2020-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-3/+37
Pull kvm updates from Paolo Bonzini: "ARM: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches x86: - Rework of TLB flushing - Rework of event injection, especially with respect to nested virtualization - Nested AMD event injection facelift, building on the rework of generic code and fixing a lot of corner cases - Nested AMD live migration support - Optimization for TSC deadline MSR writes and IPIs - Various cleanups - Asynchronous page fault cleanups (from tglx, common topic branch with tip tree) - Interrupt-based delivery of asynchronous "page ready" events (host side) - Hyper-V MSRs and hypercalls for guest debugging - VMX preemption timer fixes s390: - Cleanups Generic: - switch vCPU thread wakeup from swait to rcuwait The other architectures, and the guest side of the asynchronous page fault work, will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits) KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test KVM: check userspace_addr for all memslots KVM: selftests: update hyperv_cpuid with SynDBG tests x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls x86/kvm/hyper-v: enable hypercalls regardless of hypercall page x86/kvm/hyper-v: Add support for synthetic debugger interface x86/hyper-v: Add synthetic debugger definitions KVM: selftests: VMX preemption timer migration test KVM: nVMX: Fix VMX preemption timer migration x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit KVM: x86/pmu: Support full width counting KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT KVM: x86: acknowledgment mechanism for async pf page ready notifications KVM: x86: interrupt based APF 'page ready' event delivery KVM: introduce kvm_read_guest_offset_cached() KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present() KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously" KVM: VMX: Replace zero-length array with flexible-array ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 14:55:50 +0300