summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2021-11-25arm64: zynqmp: Fix serial compatible stringMichal Simek1-2/+2
[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ] Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART bindings to YAML") compatible string should look like differently that's why fix it to be aligned with dt binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: zynqmp: Do not duplicate flash partition label propertyAmit Kumar Mahapatra1-2/+2
[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ] In kernel 5.4, support has been added for reading MTD devices via the nvmem API. For this the mtd devices are registered as read-only NVMEM providers under sysfs with the same name as the flash partition label property. So if flash partition label property of multiple flash devices are identical then the second mtd device fails to get registered as a NVMEM provider. This patch fixes the issue by having different label property for different flashes. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-08arm64: dts: zynqmp: Remove si5328 device nodesQuanyang Wang2-38/+2
The function of_i2c_get_board_info will call of_modalias_node to check if a device_node contains "compatible" string. But for the device si5328 at zcu102/zcu106 boards, there is no proper DT bindings for them. So remove si5328 device nodes from dts files to eliminate the error info in the boot message: i2c i2c-10: of_i2c: modalias failure on /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 i2c i2c-10: Failed to create I2C device for /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-08arm64: dts: zynqmp: Add power domain for the DisplayPort DMA controllerLaurent Pinchart1-0/+1
The DisplayPort DMA controller (DPDMA) is located in the same power domain as the DisplayPort Subsystem (DPSUB). Specify the power domain in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210306230915.14979-1-laurent.pinchart@ideasonboard.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-01arm64: dts: zynqmp: Wire up the DisplayPort subsystemLaurent Pinchart6-0/+85
Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to the DisplayPort connector. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9769d4d103b6eb75e3324825117f6832a746004e.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add DisplayPort subsystemMichal Simek2-0/+28
Add a DT node for the DisplayPort subsystem, a hard IP present in the Zynq Ultrascale+ MPSoC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4d978aef852cacdfb35aa8e50d648a787e73b90c.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add DPDMA nodeLaurent Pinchart2-0/+14
Add a DT node for the DisplayPort DMA engine (DPDMA). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3d11015512a085592f2aca76eeddc04178d38bbe.1611232558.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add description for zcu104 revCMichal Simek2-0/+283
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c structure compare to revA. The rest of the board is the same from software perspective. Also enable DMAs and QSPI. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add missing iommu IDsMichal Simek1-0/+52
Add missing iommu IDs to all IPs which have IDs assigned. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/78afdafdc60c3182318894f2808f7f337a798278.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add missing lpd watchdog nodeMichal Simek2-0/+13
Xilinx ZynqMP SoC has FPD (Full Power Domain) and LPD (Low Power Domain) watchdogs. There are cases where also LPD WDT should be used by Arm cores that's why list it with disabled status. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Wire zynqmp qspi controllerMichal Simek2-0/+18
Add missing ZynqMP qspi IP. It works in single mode only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5cebbc59a452f282c4ce0f0e1dffecadac8f126a.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Wire arasan nand controllerMichal Simek2-0/+16
Add missing arasan controller with clocks. Disable it by default. Every board can enable it with specifying others properties. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/05cc1ce7973ac5200aeca428c137b422c827c5e8.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add missing mio-bank properties to sdhcisMichal Simek5-0/+6
Add missing xlnx,mio-bank property to sdhci nodes. Also add properties with 0 value to have it listed in case that files are copied to different projects where default case doesn't need to be handled in the same way. That's why explicitly list them too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/dbdfcc1b25af8b28fc658a37ce18902978cb410d.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add label for zynqmp_ipiMichal Simek1-1/+1
Add label which is used by bootloader for adding bootloader specific flag. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3dc8416abdd3498e61edcd83830a12af295c5c6d.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106Michal Simek4-0/+58
Enable psgtr driver and write clocks property to get sata to work. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/80b52ef97501968ee97fc152363bc4b9b7bb2cff.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Enable reset controller driverMichal Simek1-0/+5
Enable reset controller to be prepared for use. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4fb62952f61e5046d750fff0e3e469c7abd1d0d0.1611224800.git.michal.simek@xilinx.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-01arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111Michal Simek3-2/+145
Enable si5341 driver is the main chip for providing preprogrammed clocks for the whole platform. # cat /sys/kernel/debug/clk/clk_summary ... refhdmi 1 1 0 114285000 0 0 50000 xtal_0 0 0 0 114285000 0 0 50000 pll_0 0 0 0 40731174000000 0 0 50000 clk1_0 0 0 0 27000000 0 0 50000 clk0_0 0 0 0 27000000 0 0 50000 ref48M 1 2 0 48000000 0 0 50000 si5341 0 4 0 14000000 0 0 50000 clock-generator.N4 0 0 0 0 0 0 50000 clock-generator.N3 0 1 0 733260000 0 0 50000 clock-generator.9 0 1 0 33330000 0 0 50000 clock-generator.N2 0 1 0 104000000 0 0 50000 clock-generator.2 0 1 0 26000000 0 0 50000 clock-generator.N1 0 2 0 594000000 0 0 50000 clock-generator.7 0 1 0 74250000 0 0 50000 clock-generator.0 0 1 0 27000000 0 0 50000 clock-generator.N0 0 4 0 1000000000 0 0 50000 clock-generator.8 0 0 0 0 0 0 50000 clock-generator.6 0 1 0 125000000 0 0 50000 clock-generator.5 0 1 0 100000000 0 0 50000 clock-generator.4 0 1 0 100000000 0 0 50000 clock-generator.3 0 1 0 125000000 0 0 50000 clock-generator.1 0 0 0 0 0 0 50000 ... Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/b93f13297684704a60e8d7274009a20aa98d14f7.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106Michal Simek2-0/+39
Origin DT binding just specify driver but wasn't aligned with DT binding which came later. Extend description for zcu102 and zcu106 to cover latest binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/82b2b13006307f108ace81c50c213c3857078b57.1611224800.git.michal.simek@xilinx.com
2021-02-01arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111Michal Simek1-1/+1
u48 chip on zcu111 is si5382 not si5328. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cefda1a894fb54059aa1b018e4ecad0eb36fdc9d.1611224800.git.michal.simek@xilinx.com
2021-01-21arm64: dts: zynqmp: Add address-cells property to interrupt controllersMichal Simek1-0/+2
The commit 3eb619b2f7d8 ("scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c") updated dtc version which also contained DTC commit "81e0919a3e21 checks: Add interrupt provider test" where reasons for this checking are mentioned as "A missing #address-cells property is less critical, but creates ambiguities when used in interrupt-map properties, so warn about this as well now." That's why add address-cells property to gic and gpio nodes to get rid of this warning. CC: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e4f54ddce33b79a783aa7c76e0dc6e9787933610.1606918493.git.michal.simek@xilinx.com
2020-11-25arm64: dts: zynqmp: Wire mailbox with zynqmp-power driverMichal Simek1-0/+25
The support to driver was added by commit ffdbae28d9d1 ("drivers: soc: xilinx: Use mailbox IPI callback") that's why also enable it via DT by default. It setups communication with firmware via IPI interface. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5d3523150890e494df308ee69523d0f0e7b33b22.1605185549.git.michal.simek@xilinx.com
2020-11-25arm64: dts: zynqmp: Fix pcie ranges descriptionMichal Simek1-2/+2
DT schema is checking tuples which should be properly separated. The patch is doing this separation to avoid the following warning: ..yaml: axi: pcie@fd0e0000:ranges: [[33554432, 0, 3758096384, 0, 3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0]] is not valid under any of the given schemas (Possible causes of the failure): ...dt.yaml: axi: pcie@fd0e0000:ranges: True was expected ...dt.yaml: axi: pcie@fd0e0000:ranges:0: [33554432, 0, 3758096384, 0, 3758096384, 0, 268435456, 1124073472, 6, 0, 6, 0, 2, 0] is too long Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com
2020-11-25arm64: zynqmp: Move gic node to axi busMichal Simek1-19/+12
The reason for this change is that after change from amba to axi U-Boot started to show error like: Unable to update property /axi/ethernet@ff0e0000:mac-address, err=FDT_ERR_NOTFOUND Unable to update property /axi/ethernet@ff0e0000:local-mac-address, err=FDT_ERR_NOTFOUND The reason is implementation in fdt_nodename_eq_() which is taken from dtc to the kernel and to the U-Boot. Especially DTC commit d2a9da045897 ("libfdt: Make unit address optional for finding nodes") which is in DTC from 2007. The part of commit description is " This is contrary to traditional OF-like finddevice() behaviour, which allows the unit address to be omitted (which is useful when the device name is unambiguous without the address)." The kernel commit dfff9066e60e ("arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml") changed amba-apu/amba to axi@0/axi but fdt_nodename_eq_() detects /axi/ as match for /axi@0/ because of commit above. That's why it easier to fix one DT inside the kernel by moving GIC node from own bus to generic axi bus as is done by others SoCs. This will avoid incorrect match because the unit address is omitted. Reported-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com
2020-09-29arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1Michal Simek1-4/+4
Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 08dc0e5dd9aa ("arm64: dts: meson: fix leds subnodes name"). The patch is fixing this warning: avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com
2020-09-29arm64: dts: zynqmp: Remove undocumented u-boot propertiesMichal Simek2-6/+0
u-boot, DT properties are not documented anywhere in Linux DT binding that's why remove them. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8ba339425b9c9f319bdedce7741367055a30713c.1598257720.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-29arm64: dts: zynqmp: Remove additional compatible string for i2c IPsMichal Simek1-2/+2
DT binding permits only one compatible string which was decribed in past by commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC"). The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML") has converted binding to yaml and the following issues is reported: ...: i2c@ff030000: compatible: Additional items are not allowed ('cdns,i2c-r1p10' was unexpected) From schema: .../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds ...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too long The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") has added the second compatible string but without removing origin one. The patch is only keeping one compatible string "cdns,i2c-r1p14". Fixes: c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-29arm64: dts: zynqmp: Rename buses to be align with simple-bus yamlMichal Simek1-2/+2
Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15) chip is "using the advanced eXtensible interface (AXI) point-to-point channels for communicating addresses, data, and response transactions between master and slave clients." Issues are reported as: ...: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml ...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-29arm64: dts: xilinx: align GPIO hog names with dtschemaKrzysztof Kozlowski1-4/+4
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200916155715.21009-8-krzk@kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-21arm64: dts: zynqmp-zcu100-revC: correct interrupt flagsKrzysztof Kozlowski1-1/+1
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200917185052.5084-1-krzk@kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-17arm64: dts: xilinx: Align IOMMU nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: smmu@fd800000: $nodename:0: 'smmu@fd800000' does not match '^iommu@[0-9a-f]*' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org
2020-08-17arm64: dts: zynqmp: Add GTR transceiversLaurent Pinchart1-0/+10
Add a DT node for the PS-GTR transceivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200629120054.29338-4-laurent.pinchart@ideasonboard.com
2020-04-15arm64: zynqmp: Fix GIC compatible propertyMichal Simek1-1/+1
dtbs_check is showing warning around GIC compatible property as interrupt-controller@f9010000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic'] is not valid under any of the given schemas Similar change has been done also by commit 5400cdc1410b ("ARM: dts: sunxi: Fix GIC compatible") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/a50412fbb520954e4602f274f19a7ffbd1154ead.1582621224.git.michal.simek@xilinx.com
2020-02-28arm64: zynqmp: Add Xilinx AES nodeKalyani Akula1-0/+4
This patch adds a AES DT node for Xilinx ZynqMP SoC. Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Add label property to all ina226 on zcu106Michal Simek1-0/+18
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106Michal Simek1-18/+109
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Add label property to all ina226 on zcu102Michal Simek1-0/+18
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102Michal Simek1-18/+109
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Add label property to all ina226 on zcu111Michal Simek1-0/+14
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111Michal Simek1-14/+85
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100Michal Simek1-1/+7
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Setup default number of chipselects for zcu100Michal Simek1-0/+2
There is only one chipselect on each connector. Define it directly in board dts file. There should be an option to use more chipselects via gpios. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Remove broken-cd from zcu100-revCMichal Simek1-1/+0
Card detect bit was broken on revA and it is working fine with revC board that's why this property can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Fix the si570 clock frequency on zcu111Venkatesh Yadav Abbarapu1-1/+1
The si570 clock frequency should be 156.25MHz as per datasheet. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Setup clock-output-names for si570 chipsMichal Simek3-0/+6
If there are more instances of si570 clock-output-names property should be used for differentiation of clock output. The patch is adding this optional properties for all zynqmp boards with si570 chip. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Turn comment to gpio-line-namesMichal Simek1-34/+9
Label gpio lines properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104Michal Simek1-2/+2
I2c address is not 0x21 but 0x20. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Remove addition number in node nameMichal Simek1-2/+2
This change is coming from mainline review that's why this patch is sync. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: zynqmp: Use ethernet-phy as node name for ethernet physMichal Simek9-10/+10
Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: dts: xilinx: Add the power nodes for zynqmpRajan Vaja1-0/+48
Add power domain nodes for zynqmp. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-09arm64: dts: xilinx: Remove dtsi for fixed clockRajan Vaja1-213/+0
Currently CCF clocks sre used in zynqmp dts. So there is no use of dtsi for fixed clock. Remove dtsi for fixed clock. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 20:15:16 +0300