summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27arm64: dts: qcom: add IPA qcom,qmp propertyAlex Elder3-0/+6
commit 73419e4d2fd1b838fcb1df6a978d67b3ae1c5c01 upstream. At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220201140723.467431-1-elder@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: qcom: sm8350: Correct TCS configuration for apps rscMaulik Shah1-1/+1
[ Upstream commit a131255e4ad1ef8d4873ecba21561ba272b2547a ] Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-4-git-send-email-quic_mkshah@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8150: Correct TCS configuration for apps rscMaulik Shah1-3/+3
[ Upstream commit 17ac8af678b6da6a8f1df7da8ebf2c5198741827 ] Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-2-git-send-email-quic_mkshah@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8250: fix PCIe bindings to follow schemaDmitry Baryshkov1-6/+6
[ Upstream commit d60507200485bc778bf6a5556271d784ab09d913 ] Replace (unused) enable-gpio binding with schema-defined wake-gpios. The GPIO line is still unused, but at least we'd follow the defined schema. While we are at it, change perst-gpio property to follow the preferred naming schema (perst-gpios). Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sdm845: fix microphone bias properties and valuesDavid Heidelberg1-4/+4
[ Upstream commit 625c24460dbbc3b6c9a148c0a30f0830893fc909 ] replace millivolt with correct microvolt and adjust value to the minimal value allowed by documentation. Found with `make qcom/sdm845-oneplus-fajita.dtb`. Fixes: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes") Signed-off-by: David Heidelberg <david@ixit.cz> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2Manivannan Sadhasivam1-2/+2
commit 1b7101e8124b450f2d6a35591e9cbb478c143ace upstream. Fix the MSI IRQ used for PCIe instances 1 and 2. Cc: stable@vger.kernel.org Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support") Reported-by: Jordan Crouse <jordan@cosmicpenguin.net> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220112035556.5108-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16arm64: dts: qcom: sm8350: Correct UFS symbol clocksBjorn Andersson1-5/+23
[ Upstream commit 0fd4dcb607ce29110d6c0b481a98c4ff3d300551 ] The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent clock lookup")' broke UFS support on SM8350. The cause for this is that the symbol clocks have a specified rate in the "freq-table-hz" table in the UFS node, which causes the UFS code to request a rate change, for which the "bi_tcxo" happens to provide the closest rate. Prior to the change in regmap-mux it was determined (incorrectly) that no change was needed and everything worked. The rates of 75 and 300MHz matches the documentation for the symbol clocks, but we don't represent the parent clocks today. So let's mimic the configuration found in other platforms, by omitting the rate for the symbol clocks as well to avoid the rate change. While at it also fill in the dummy symbol clocks that was dropped from the GCC driver as it was upstreamed. Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16arm64: dts: qcom: sm8350: Describe GCC dependency clocksKonrad Dybcio1-2/+24
[ Upstream commit 9ea9eb36b3c046fc48e737db4de69f7acd12f9be ] Add all the clock names that the GCC driver expects to get via DT, so that the clock handles can be filled as the development progresses. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-8-konrad.dybcio@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: msm8996: drop not documented adreno propertiesDavid Heidelberg1-3/+0
commit c41910f257a22dc406c60d8826b4a3b5398003a3 upstream. These properties aren't documented nor implemented in the driver. Drop them. Fixes warnings as: $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml ... arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml ... Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions") Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom nameKonrad Dybcio1-1/+1
[ Upstream commit f52dd33943ca5f84ae76890f352f6d9e12512c3f ] Thermal zone names should not be longer than 20 names, which is indicated by a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to fix it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-6-konrad.dybcio@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: ipq6018: Fix gpio-ranges propertyBaruch Siach1-1/+1
[ Upstream commit 72cb4c48a46a7cfa58eb5842c0d3672ddd5bd9ad ] There must be three parameters in gpio-ranges property. Fixes this not very helpful error message: OF: /soc/pinctrl@1000000: (null) = 3 found 3 Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: c630: Fix soundcard setupSrinivas Kandagatla1-0/+27
[ Upstream commit c02b360ca67ebeb9de07b47b2fe53f964c2561d1 ] Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback. This setup has issues, ex if we try to play on headset the audio stream is also sent to SoundWire Speakers and we will hear sound in both headsets and speakers. Make a separate device for Speakers and Headset so that the streams are different and handled properly. Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211209175342.20386-2-srinivas.kandagatla@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: msm8916: fix MMC controller aliasesDmitry Baryshkov1-2/+2
[ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ] Change sdhcN aliases to mmcN to make them actually work. Currently the board uses non-standard aliases sdhcN, which do not work, resulting in mmc0 and mmc1 hosts randomly changing indices between boots. Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201020559.1611890-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: sc7280: Fix incorrect clock namePrasad Malisetty1-1/+1
[ Upstream commit fa09b2248714c64644576d8064e9bd292a504a0e ] Replace pcie_1_pipe-clk clock name with pcie_1_pipe_clk To match with dt binding. Fixes: ab7772de8612 ("arm64: dts: qcom: SC7280: Add rpmhcc clock controller node") Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1637060508-30375-2-git-send-email-pmaliset@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: dts: qcom: Fix node name of rpm-msg-ram device nodesStephan Gerhold7-7/+7
[ Upstream commit 179811bebc7b91e0f9d0adee9bfa3d2af9c43869 ] According to the new DT schema for qcom,rpm-msg-ram the node name should be sram@. memory@ is reserved for definition of physical RAM (usable by Linux). This fixes the following dtbs_check error on various device trees: memory@60000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely propertyShawn Guo1-1/+1
[ Upstream commit 1c8bf398b6b51eb085a49036ad8f9c000171cce1 ] Property qcom,controlled-remotely should be boolean. Fix it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely propertyShawn Guo1-1/+1
[ Upstream commit 8c97f0ac4dc8f1743eb8e8a49f66189e13ae45e9 ] Property qcom,controlled-remotely should be boolean. Fix it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely propertyShawn Guo1-1/+1
[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ] Property qcom,controlled-remotely should be boolean. Fix it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residencyAngeloGioacchino Del Regno1-8/+12
[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ] The entry/exit latency and minimum residency in state for the idle states of MSM8998 were ..bad: first of all, for all of them the timings were written for CPU sleep but the min-residency-us param was miscalculated (supposedly, while porting this from downstream); Then, the power collapse states are setting PC on both the CPU cluster *and* the L2 cache, which have different timings: in the specific case of L2 the times are higher so these ones should be taken into account instead of the CPU ones. This parameter misconfiguration was not giving particular issues because on MSM8998 there was no CPU scaling at all, so cluster/L2 power collapse was rarely (if ever) hit. When CPU scaling is enabled, though, the wrong timings will produce SoC unstability shown to the user as random, apparently error-less, sudden reboots and/or lockups. This set of parameters are stabilizing the SoC when CPU scaling is ON and when power collapse is frequently hit. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clockVladimir Zapolskiy1-1/+1
[ Upstream commit d5240f8e23641c70bc70892d7999398b081ccb7e ] The change corrects the described bus clock of the QCE. Fixes: 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: sdm845: Use RPMH_CE_CLK macro directlyBhupesh Sharma1-2/+2
[ Upstream commit eed1d9b6e36b06faa53c6dc74134ec21b1336d94 ] In commit 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine."), we decided to use the value indicated by constant RPMH_CE_CLK rather than using it directly. Now that the same RPMH clock value might be used for other SoCs (in addition to sdm845), let's use the constant RPMH_CE_CLK to make sure that this dtsi is compatible with the other qcom ones. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20210519143700.27392-8-bhupesh.sharma@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED nodeMarijn Suijten1-1/+1
[ Upstream commit b110dfa5ad42be93ebf73540d16430878dfb26bb ] The property is named "qcom,external-pfet", as found by dt_binding_check: 'qcom,eternal-pfet' does not match any of the regexes Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000Stephan Gerhold1-1/+0
[ Upstream commit 483de2b44cd3a168458f8f9ff237e78a434729bc ] While removing the size from the "reg" properties in pm8916.dtsi, commit bd6429e81010 ("ARM64: dts: qcom: Remove size elements from pmic reg properties") mistakenly also removed the second register address for the rtc@6000 device. That one did not represent the size of the register region but actually the address of the second "alarm" register region of the rtc@6000 device. Now there are "reg-names" for two "reg" elements, but there is actually only one "reg" listed. Since the DT schema for "qcom,pm8941-rtc" only expects one "reg" element anyway, just drop the "reg-names" entirely to fix this. Fixes: bd6429e81010 ("ARM64: dts: qcom: Remove size elements from pmic reg properties") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928112945.25310-1-stephan@gerhold.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clockStephan Gerhold1-1/+7
[ Upstream commit 8199a0b31e76d158ac14841e7119890461f8c595 ] At the moment, playing audio on Secondary MI2S will just end up getting stuck, without actually playing any audio. This happens because the wrong bit clock is configured when playing audio on Secondary MI2S. The PRI_I2S_CLK (better name: SPKR_I2S_CLK) is used by the SPKR audio mux block that provides both Primary and Secondary MI2S. The SEC_I2S_CLK (better name: MIC_I2S_CLK) is used by the MIC audio mux block that provides Tertiary MI2S. Quaternary MI2S is also part of the MIC audio mux but has its own clock (AUX_I2S_CLK). This means that (quite confusingly) the SEC_I2S_CLK is not actually used for Secondary MI2S as the name would suggest. Secondary MI2S needs to have the same clock as Primary MI2S configured. Fix the clock list for the lpass node in the device tree and add a comment to clarify this confusing naming. With these changes, audio can be played correctly on Secondary MI2S. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 3761a3618f55 ("arm64: dts: qcom: add lpass node") Tested-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210816181810.2242-1-stephan@gerhold.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: sc7280: fix display port phy reg propertyKuogee Hsieh1-6/+2
[ Upstream commit 425f30cc843c727bc7753a0d33710d1e4a999168 ] Existing display port phy reg property is derived from usb phy which map display port phy pcs to wrong address which cause aux init with wrong address and prevent both dpcd read and write from working. Fix this problem by assigning correct pcs address to display port phy reg property. Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm64: dts: qcom: sc7180: Base dynamic CPU power coefficients in realityDouglas Anderson3-31/+31
[ Upstream commit 82ea7d411d43f60dce878252558e926f957109f0 ] The sc7180's dynamic-power-coefficient violates the device tree bindings. The bindings (arm/cpus.yaml) say that the units for the dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs and then picked a number for the big CPU based on this. At the time, there was a giant dicussion about this. Apparently Qualcomm Engineers were instructed not to share the actual numbers here. As part of the discussion, I pointed out [1] that these numbers shouldn't really be secret since once a device is shipping anyone can just run a script and produce them. This patch is the result of running the script I posted in that discussion on sc7180-trogdor-coachz, which is currently available for purchase by consumers. [1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/ I ran the script four times, measuring little, big, little, big. I used the 64-bit version of dhrystone 2.2 in my test. I got these results: 576 kHz, 596 mV, 20 mW, 88 Cx 768 kHz, 596 mV, 32 mW, 122 Cx 1017 kHz, 660 mV, 45 mW, 97 Cx 1248 kHz, 720 mV, 87 mW, 139 Cx 1324 kHz, 756 mV, 109 mW, 148 Cx 1516 kHz, 828 mV, 150 mW, 148 Cx 1612 kHz, 884 mV, 182 mW, 147 Cx 1708 kHz, 884 mV, 192 mW, 146 Cx 1804 kHz, 884 mV, 207 mW, 149 Cx Your dynamic-power-coefficient for cpu 0: 132 825 kHz, 596 mV, 142 mW, 401 Cx 979 kHz, 628 mV, 183 mW, 427 Cx 1113 kHz, 656 mV, 224 mW, 433 Cx 1267 kHz, 688 mV, 282 mW, 449 Cx 1555 kHz, 812 mV, 475 mW, 450 Cx 1708 kHz, 828 mV, 566 mW, 478 Cx 1843 kHz, 884 mV, 692 mW, 476 Cx 1900 kHz, 884 mV, 722 mW, 482 Cx 1996 kHz, 916 mV, 814 mW, 482 Cx 2112 kHz, 916 mV, 862 mW, 483 Cx 2208 kHz, 916 mV, 962 mW, 521 Cx 2323 kHz, 940 mV, 1060 mW, 517 Cx 2400 kHz, 956 mV, 1133 mW, 518 Cx Your dynamic-power-coefficient for cpu 6: 471 576 kHz, 596 mV, 26 mW, 103 Cx 768 kHz, 596 mV, 40 mW, 147 Cx 1017 kHz, 660 mV, 54 mW, 114 Cx 1248 kHz, 720 mV, 97 mW, 151 Cx 1324 kHz, 756 mV, 113 mW, 150 Cx 1516 kHz, 828 mV, 154 mW, 148 Cx 1612 kHz, 884 mV, 194 mW, 155 Cx 1708 kHz, 884 mV, 203 mW, 152 Cx 1804 kHz, 884 mV, 219 mW, 155 Cx Your dynamic-power-coefficient for cpu 0: 142 825 kHz, 596 mV, 148 mW, 530 Cx 979 kHz, 628 mV, 189 mW, 475 Cx 1113 kHz, 656 mV, 230 mW, 461 Cx 1267 kHz, 688 mV, 287 mW, 466 Cx 1555 kHz, 812 mV, 469 mW, 445 Cx 1708 kHz, 828 mV, 567 mW, 480 Cx 1843 kHz, 884 mV, 699 mW, 482 Cx 1900 kHz, 884 mV, 719 mW, 480 Cx 1996 kHz, 916 mV, 814 mW, 484 Cx 2112 kHz, 916 mV, 861 mW, 483 Cx 2208 kHz, 916 mV, 963 mW, 522 Cx 2323 kHz, 940 mV, 1063 mW, 520 Cx 2400 kHz, 956 mV, 1135 mW, 519 Cx Your dynamic-power-coefficient for cpu 6: 489 As you can see, the calculations aren't perfectly consistent but roughly you could say about 480 for big and 137 for little. The ratio between these numbers isn't quite the same as the ratio between the two numbers that Qualcomm used. Perhaps this is because Qualcomm measured something slightly different than the 64-bit version of dhrystone 2.2 or perhaps it's because they fudged these numbers a bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's use the numbers I came up with and also un-fudge capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it so that bigs are 1024 which seems to be the common practice. In general these numbers don't need to be perfectly exact. In fact, they can't be since the CPU power depends a lot on what's being run on the CPU and the big/little CPUs are each more or less efficient in different operations. Historically running the 32-bit vs. 64-bit versions of dhrystone produced notably different numbers, though I didn't test this time. We also need to scale all of the sustainable-power numbers by the same amount. I scale ones related to the big CPUs by the adjustment I made to the big dynamic-power-coefficient and the ones related to the little CPUs by the adjustment I made to the little dynamic-power-coefficient. [2] https://lore.kernel.org/r/0a865b6e-be34-6371-f9f2-9913ee1c5608@codeaurora.org/ Fixes: 71f873169a80 ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-26Merge tag 'qcom-arm64-fixes-for-5.15-2' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DTS one more fix for 5.15 This reverts a clock change in the Qualcomm RB5 devicetree which in some combinations of firmware and configuration causes the device to crash during boot. Data on an adjacent platform indicates that this is probably not be the root cause of the problem, but this resolves the regression seen on RB5 and will allow the SM8250 platform to boot v5.15. * tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-25Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for ↵Amit Pundir1-1/+2
sm8250 target" This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4. This upstream commit broke AOSP (post Android 12 merge) build on RB5. The device either silently crashes into USB crash mode after android boot animation or we see a blank blue screen with following dpu errors in dmesg: [ T444] hw recovery is not complete for ctl:3 [ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22 [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 [ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
2021-10-08Merge tag 'armsoc-fixes-5.15' of ↵Linus Torvalds7-19/+80
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a larger than normal update for Arm SoC specific code, most of it in device trees, but also drivers and the omap and at91/sama7 platforms: - There are four new entries to the MAINTAINERS file: Sven Peter and Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar, and Vignesh Raghavendra for TI K3 - Build fixes to address randconfig warnings in sharpsl, dove, omap1, and qcom platforms as well as the scmi and op-tee subsystems - Regression fixes for missing CONFIG_FB and other options for several defconfigs - Several bug fixes for the newly added Microchip SAMA7 platform, mostly regarding power management - Missing SMP barriers to protect accesses to SCMI virtio device - Regression fixes for TI OMAP, including a boot-time hang on am335x. - Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings in devicetree files, and one revert for broken suspend. - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple of schema warnings. - Regression fixes for qualcomm SoC specific drivers and devicetree files, reverting an mdt_loader change and at least pastially reverting some of the 5.15 DTS changes, plus some minor bugfixes" * tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits) MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer firmware: arm_scmi: Add proper barriers to scmi virtio device firmware: arm_scmi: Simplify spinlocks in virtio transport ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 ARM: sharpsl_param: work around -Wstringop-overread warning ARM: defconfig: gemini: Restore framebuffer ARM: dove: mark 'putc' as inline ARM: omap1: move omap15xx local bus handling to usb.c MAINTAINERS: Add Vignesh to TI K3 platform maintainership arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail ...
2021-09-24arm64: dts: qcom: sdm630: Add missing a2noc qos clocksShawn Guo1-2/+13
It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Fixes: 045547a02252 ("arm64: dts: qcom: sdm630: Add interconnect provider nodes") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210824043435.23190-4-shawn.guo@linaro.org
2021-09-24arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodesDmitry Baryshkov1-0/+10
Enable powerkey and resin nodes to let the board handle POWER and Volume- keys properly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
2021-09-24arm64: dts: qcom: pm8150: specify reboot mode magicsDmitry Baryshkov1-0/+2
Specify recovery and bootloader magic values to be programmed by the qcom-pon driver. This allows the bootloader to handle reboot-to-bootloader functionality. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
2021-09-24arm64: dts: qcom: pm8150: use qcom,pm8998-pon bindingDmitry Baryshkov1-1/+1
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon in order to pass reboot mode properly. Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
2021-09-20arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMIStephen Boyd1-5/+4
This should be the dai for display port. Without this set properly we fail to get audio routed through external displays on trogdor. It looks like we picked up v4[1] of this patch when there was a v7[2]. The v7 patch still had the wrong sound-dai but at least we can fix all this up and audio works. Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Fixes: b22d313e1772 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI") Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1] Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
2021-09-20arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappingsAmit Pundir2-8/+47
Upstream commit 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") shuffled reserved memory regions in sdm845.dtsi to make firmware loading succeed and enable the ipa device on sdm845-yoga but it broke the other common users of those memory regions like Xiaomi Pocophone F1. So this patch effectively revert those upstream commit changes and move all the relevant changes to sdm850-lenovo-yoga-c630.dts instead. Fixes: 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
2021-09-14arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize propertyRobert Marko1-2/+0
tx-fifo-resize is now added by default by the dwc3-qcom driver to the SNPS DWC3 child node. So, lets drop the tx-fifo-resize property from dwc3-qcom nodes as having it there will cause the dwc3-qcom driver to error and abort probe with: [ 1.362938] dwc3-qcom 8af8800.usb: unable to add property [ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17 Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default") Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-13Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"Douglas Anderson1-3/+3
This reverts commit 11e03d692101e484df9322f892a8b6e111a82bfd. As per discussion [1] the patch shouldn't have landed. Let's revert. [1] https://lore.kernel.org/r/fde7bac239f796b039b9be58b391fb77@codeaurora.org/ Fixes: 11e03d692101 ("arm64: dts: qcom: sc7280: Fixup the cpufreq node") Reported-by: Matthias Kaehlcke <mka@chromium.org> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210907121220.1.I08460f490473b70de0d768db45f030a4d5c17828@changeid
2021-09-02Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds58-916/+6570
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-15/+15
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'usb-5.15-rc1' of ↵Linus Torvalds2-0/+203
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.15-rc1. Nothing huge in here, just lots of constant forward progress on a number of different drivers and hardware support: - more USB 4/Thunderbolt support added - dwc3 driver updates and additions - usb gadget fixes and addtions for new types - udc gadget driver updates - host controller updates - removal of obsolete drivers - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: isp1760: otg control register access usb: isp1760: use the right irq status bit usb: isp1760: write to status and address register usb: isp1760: fix qtd fill length usb: isp1760: fix memory pool initialization usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least" usb: dwc2: Fix spelling mistake "was't" -> "wasn't" usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed" usb: host: xhci-rcar: Don't reload firmware after the completion usb: xhci-mtk: allow bandwidth table rollover usb: mtu3: fix random remote wakeup usb: mtu3: return successful suspend status usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint usb: xhci-mtk: modify the SOF/ITP interval for mt8195 usb: xhci-mtk: add a member of num_esit usb: xhci-mtk: check boundary before check tt usb: xhci-mtk: update fs bus bandwidth by bw_budget_table usb: xhci-mtk: fix issue of out-of-bounds array access usb: xhci-mtk: support option to disable usb2 ports usb: xhci-mtk: fix use-after-free of mtk->hcd ...
2021-08-30Merge back new PM domains material for v5.15.Rafael J. Wysocki1-0/+24
2021-08-24Merge 5.14-rc7 into usb-nextGreg Kroah-Hartman5-5/+21
We need the USB fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-17Merge tag 'v5.14-rc3' into arm64-for-5.15Bjorn Andersson9-14/+14
The USB maintainer felt the strong need to push '1f958f3dff42 ("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")' through the usb tree, so merge v5.14-rc3 to resolve the resulting merge conflicts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-17Merge tag 'qcom-arm64-fixes-for-5.14' of ↵Arnd Bergmann5-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 fixes for v5.14 This fixes three regressions across Angler and Bullhead, introduced by advancements in the platform definition. It then corrects the powerdown GPIOs for the speaker amps on C630 and lastly fixes a typo that assigned CPU7 in SC7280 to the wrong CPUfreq domain. * tag 'qcom-arm64-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sdm845-oneplus: fix reserved-mem arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7 arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping arm64: dts: qcom: msm8992-bullhead: Remove PSCI arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x Link: https://lore.kernel.org/r/20210816205030.576348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16arm64: dts: sc7180: Add required-opps for i2cRajendra Nayak1-0/+24
qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz) Though qup-i2c does not support DVFS, it still needs to vote for a performance state on 'CX' to satisfy the 19.2 Mhz clock frequency requirement. Use 'required-opps' to pass this information from device tree, and also add the power-domains property to specify the CX power-domain. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-05arm64: dts: qcom: sdm845-oneplus: fix reserved-memCaleb Connolly1-2/+2
Fix the upper guard and the "removed_region", this fixes the random crashes which used to occur in memory intensive loads. I'm not sure WHY the upper guard being 0x2000 instead of 0x1000 doesn't fix this, but it HAS to be 0x1000. Fixes: e60fd5ac1f68 ("arm64: dts: qcom: sdm845-oneplus-common: guard rmtfs-mem") Signed-off-by: Caleb Connolly <caleb@connolly.tech> Link: https://lore.kernel.org/r/20210720153125.43389-2-caleb@connolly.tech Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05arm64: dts: qcom: msm8994-angler: Disable cont_splash_memPetr Vorel1-0/+4
As the default definition breaks booting angler: [ 1.862561] printk: console [ttyMSM0] enabled [ 1.872260] msm_serial: driver initialized D - 15524 - pm_driver_init, Delta cont_splash_mem was introduced in 74d6d0a145835, but the problem manifested after commit '86588296acbf ("fdt: Properly handle "no-map" field in the memory region")'. Disabling it because Angler's firmware does not report where the memory is allocated (dmesg from downstream kernel): [ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000000000000, size 16 MiB, limit 0x0000000000000000 [ 0.000000] cma: CMA: reserved 16 MiB at 0x0000000000000000 for cont_splash_mem Similar issue might be on Google Nexus 5X (lg-bullhead). Other MSM8992/4 are known to report correct address. Fixes: 74d6d0a145835 ("arm64: dts: qcom: msm8994/8994-kitakami: Fix up the memory map") Suggested-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Link: https://lore.kernel.org/r/20210622191019.23771-1-petr.vorel@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05arm64: dts: qcom: sm8250: assign DSI clock source parentsDmitry Baryshkov1-0/+6
Assign DSI clock source parents to DSI PHY clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-6-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05arm64: dts: qcom: sdm845-mtp: assign DSI clock source parentsDmitry Baryshkov1-0/+3
Assign DSI clock source parents to DSI PHY clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-05arm64: dts: qcom: sdm845: assign DSI clock source parentsDmitry Baryshkov1-0/+6
Assign DSI clock source parents to DSI PHY clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-29 10:15:33 +0300