summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2021-06-01arm64: dts: meson: set 128bytes FIFO size on uart ANeil Armstrong1-0/+1
The first UART controller in "Everything-Else" power domain, usually used for Bluetooth HCI has 128bytes FIFO depth. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
2021-04-23arm64: dts: amlogic: misc DT schema fixupsKevin Hilman1-1/+0
Take a pass at cleaning up a bunch of warnings from 'make dtbs_check' that have crept in. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-26Revert "arm64: dts: amlogic: add missing ethernet reset ID"Neil Armstrong1-2/+0
It has been reported on IRC and in KernelCI boot tests, this change breaks internal PHY support on the Amlogic G12A/SM1 Based boards. We suspect the added signal to reset more than the Ethernet MAC but also the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY. This reverts commit f3362f0c18174a1f334a419ab7d567a36bd1b3f3 while we find and acceptable solution to cleanly reset the Ethernet MAC. Reported-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Jérôme Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210126080951.2383740-1-narmstrong@baylibre.com
2020-12-07arm64: dts: meson-axg: add GE2D nodeNeil Armstrong1-0/+9
This adds the node for the GE2D accelerator unit. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201202174417.3778306-5-narmstrong@baylibre.com
2020-12-01arm64: dts: meson-axg: add PCIe nodesNeil Armstrong1-0/+61
This adds the nodes for the : - AXG PCIe PHY, using the shared analog PCIe/MIPI DSI PHY - 2x AXG PCIe controllers Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201120153229.3920123-4-narmstrong@baylibre.com
2020-12-01arm64: dts: meson-axg: add MIPI DSI PHY nodesNeil Armstrong1-0/+19
This adds the nodes for : - MIPI DSI+PCIe analog phy - MIPI D-PHY Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201120152131.3918814-3-narmstrong@baylibre.com
2020-12-01arm64: dts: meson-axg: add PWRC nodeNeil Armstrong1-0/+42
This adds the power controller PWRC node and the corresponding ethernet power domain. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201120152131.3918814-2-narmstrong@baylibre.com
2020-10-21arm64: dts: amlogic: add missing ethernet reset IDAnand Moon1-0/+2
Add reset external reset of the ethernet mac controller Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201020120141.298240-1-jbrunet@baylibre.com
2020-10-05arm64: dts: meson-axg: add USB nodesNeil Armstrong1-0/+50
This adds the USB Glue node, with the USB2 & USB3 controllers along the single USB2 PHY node. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-07-13arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clockMartin Blumenstingl1-2/+4
Add the "timing-adjustment" clock now that we know how it is connected to the PRG_ETHERNET registers. It is used internally to generate the RGMII RX delay on the MAC side (if needed). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620162347.26159-1-martin.blumenstingl@googlemail.com
2020-04-29arm64: dts: meson: fixup SCP sram nodesNeil Armstrong1-3/+3
The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries. Fixup the sram entries node names, and use proper compatible for them. It notably fixes: sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com
2020-01-08arm64: dts: meson: add audio fifo depthsJerome Brunet1-0/+6
Add the property describing the depth of the audio fifo on the axg, g12a and sm1 SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: Link nvmem and secure-monitor nodesCarlo Caione1-0/+1
The former is going to use the latter to retrieve the efuses data. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: axg: fix audio fifo reg sizeJerome Brunet1-6/+6
The register region size initially is too small to access all the fifo registers. Fixes: f2b8f6a93357 ("arm64: dts: meson-axg: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-axg: fix MHU compatibleNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-axg-s400.dt.yaml: mailbox@ff63c404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson: fix ethernet mac reg formatNeil Armstrong1-2/+2
This fixes the following DT schemas check errors: meson-axg-s400.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-axg-s400.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-g12a-u200.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-g12a-u200.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too lon while here, also drop the redundant reg property from meson-gxl.dtsi because it had the same value as meson-gx.dtsi from which it inherits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-09arm64: dts: meson: add ethernet fifo sizesJerome Brunet1-0/+2
If unspecified in DT, the fifo sizes are not automatically detected by the dwmac1000 dma driver and the reported fifo sizes default to 0. Because of this, flow control will be turned off on the device. Add the fifo sizes provided by the datasheets in the SoC in DT so flow control may be enabled if necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-12arm64: dts: meson: add dwmac-3.70a to ethmac compatible listJerome Brunet1-1/+3
After discussing with Amlogic, the Synopsys GMAC version used by the gx and axg family is the 3.70a. Set this is in DT Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: fix mmc pin biasJerome Brunet1-7/+24
Clk pin does not require bias, data strobe should be pulled low. The rest of the pin (data and cmd) are pulled up. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-15Merge tag 'amlogic-dt64' of ↵Arnd Bergmann1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.1 - new board: G12a-based x96 max - G12a: add peripheral clock controller and clock measure support - s400: fix SD/eMMC max rate issues - s400: audio: add sp/dif in support - GX: support simplefb * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add g12a x96 max board dt-bindings: arm: amlogic: add amediatech x96-max bindings arm64: dts: meson: g12a: add peripheral clock controller arm64: dts: meson: g12a: add clk measure support arm64: dts: meson: axg: add clk measure support arm64: dts: meson: fix g12a buses arm64: dts: meson-axg: add efuse device arm64: dts: meson: s400: fix emmc maximum rate arm64: dts: meson: s400: enable sdr104 on sdio arm64: dts: meson-gx: add support for simplefb dt-bindings: meson: add specific simplefb bindings arm64: dts: meson-gx: Add canvas provider node to the vpu arm64: dts: meson-axg: s400: add spdifin to the sound card arm64: dts: meson-axg: s400: add spdif-dir codec arm64: dts: meson-axg: add spdifin Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-08arm64: dts: meson: axg: add clk measure supportJerome Brunet1-0/+5
Add the clock measure device to the axg SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-30arm64: dts: Remove inconsistent use of 'arm,armv8' compatible stringRob Herring1-4/+4
The 'arm,armv8' compatible string is only for software models. It adds little value otherwise and is inconsistently used as a fallback on some platforms. Remove it from those platforms. This fixes warnings generated by the DT schema. Reported-by: Michal Simek <michal.simek@xilinx.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Chanho Min <chanho.min@lge.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-17arm64: dts: meson-axg: add efuse deviceJerome Brunet1-0/+8
Add efuse to the AXG family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-11arm64: dts: meson-axg: add spdifinJerome Brunet1-0/+12
Add the SPDIF input device of the axg audio subsystem Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-08arm64: dts: meson: Fix IRQ trigger type for macirqCarlo Caione1-1/+1
A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed. After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING. The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well. Fixes: feb3cbea0946 ("ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage") Fixes: 6d28d577510f ("ARM64: dts: meson-axg: fix ethernet stability issue") Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-08arm64: dts: meson-axg: Enable GPIO interrupt controllerCarlo Caione1-2/+2
Enable the GPIO interrupt controller for the AXG SoCs. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05arm64: dts: meson: add clock controller clock inputsJerome Brunet1-0/+4
Add the clock inputs of the clock controllers Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05arm64: dts: meson-axg: remove alternate xtalJerome Brunet1-7/+0
There is actually no alternate xtal on any of the axg board I have seen so far. The 32k is actually generated internally, deriving from the 24MHz main xtal. Amlogic SoC also have the option to provide the 32k reference externally, through one of the AO pads, but no platform is using this ATM. Fixes: 5e395e146667 ("ARM64: dts: meson-axg: add an 32K alt aoclk") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-05arm64: dts: meson-axg: Enable watchdog on Meson AXG SoCsCarlo Caione1-0/+6
Add the watchdog node also on the AXG platforms. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: consistently disable pin biasJerome Brunet1-0/+103
On Amlogic chipsets, the bias set through pinconf applies to the pad itself, not only the GPIO function. This means that even when we change the function of the pad from GPIO to anything else, the bias previously set still applies. As we have seen with the eMMC, depending on the bias type and the function, it may trigger problems. The underlying issue is that we inherit whatever was left by previous user of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual setup we will get is undefined. There is nothing mentioned in the documentation about pad bias and pinmux function, however leaving it undefined is not an option. This change consistently disable the pad bias for every pinmux functions. It seems to work well, we can only assume that the necessary bias (if any) is already provided by the pin function itself. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: disable pad bias for mmc pinmuxesJerome Brunet1-0/+2
In some cases (such as a boot from SPI) the bootloader or the ROM code may leave a bias pull-down on the mmc pins. If so the MMC will fail during the initialisation. Explicitly disabling the pinmux solves the problem. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson: remove extra subnode in mmc clk_gate pinmuxJerome Brunet1-6/+0
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for the function definition, the other for the bias. This is not necessary since we can define the function and the bias in the same subnode. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: enable SCPIJerome Brunet1-0/+26
Enable SCPI on the axg platform, with cpu clock and hwmon (core temperature) support Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: correct sram shared mem unit-addressJerome Brunet1-2/+2
Correct the unit-address in the node name of the SRAM shared memory Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: fix mailbox addressJerome Brunet1-2/+2
MHU mailbox address is wrong. Fixing it enables the mailboxes on the A113. These mailboxes are needed for SCPI Fixes: 9d59b708500f ("arm64: dts: meson-axg: add initial A113D SoC DT support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: add secure monitorJerome Brunet1-0/+4
Add the secure monitor device to the axg platform. With this, we can read the SoC serial number. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-axg: fix dtc warning about unit addressJerome Brunet1-3/+3
section 2.2.1 of the DT specs says: " If the node has no reg property, the @unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level in the tree" Simply replace the '@' with a '-' to fix this warning. Cc: Fabio Estevam <festevam@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson: Switch simple-mfd and syscon orderNeil Armstrong1-2/+2
The order between "syscon" and "simple-mfd" is important because in these particular cases, the node needs to be first a "simple-mfd" to expose it's sub-nodes, and later on a "syscon" to permit other nodes to access this register space through the "syscon" mechanism. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson-axg: use the proper compatible for ethmacNeil Armstrong1-1/+1
Use the correct compatible for the AXG ethernet mac node. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson-axg: add pdmJerome Brunet1-0/+12
Add the PDM device of the axg audio subsystem Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson-axg: sort nodes consistentlyJerome Brunet1-815/+815
Sort DT nodes by address when possible, by node node name otherwise. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-29arm64: dts: meson-axg: add audio fifosJerome Brunet1-0/+67
Add TODDR and FRDDR audio fifos of the AXG SoC. These fifos are the capture and playback memory interfaces of audio subsystem of the AXG. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-01Merge tag 'amlogic-dt64-3' of ↵Olof Johansson1-0/+149
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 64-bit DT updates for v4.19, round 3 - add DT support for AXG Audio * tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator arm64: dts: meson-axg: add vcc 5v regulator on the s400 arm64: dts: meson-axg: improve power supplies description Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26Merge tag 'amlogic-dt64-2-1' of ↵Olof Johansson1-0/+36
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 64-bit DT changes for v4.19, round 2 - new SoC: S905W - new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini - AXG: add DT for new audio clock controller * tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd. ARM64: dts: meson-axg: add the audio clock controller clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-25arm64: dts: meson-axg: add tdm interfacesJerome Brunet1-0/+33
Add the devices reponsible for managing the i2s/tdm clocks and pads Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add tdmout formattersJerome Brunet1-0/+42
Add the tdm devices responsible for serializing audio samples for i2s/tdm interfaces Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add tdmin formattersJerome Brunet1-0/+56
Add the tdm devices responsible for decoding the data provided through audio serial interface. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add spdifoutJerome Brunet1-0/+11
Add the SPDIF output device of the axg audio subsystem Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add audio arb reset controllerJerome Brunet1-0/+7
Add the audio memory arbiter which control the access of the audio fifos to the DDR. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-22Merge tag 'amlogic-dt64-1' of ↵Olof Johansson1-0/+126
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 64-bit DT updates for v4.19 - new SoC: S805x - new board: S805x-based P241 board from Amlogic - AXG: add ADC support w/buttons, add pins for PDM, SPDIF - AXG: s400 board: preliminary support for audio - GX: nanopi-k2: add HDMI, CEC, CVBS support * tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-axg: add pdm pins ARM64: dts: meson-axg: add spdif input pins ARM64: dts: meson-axg: remove spdif out from gpio a7 ARM64: dts: meson-axg: add adc buttons the S400 ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi ARM64: dts: meson-axg: add saradc support ARM64: dts: add S805X based P241 board dt-bindings: amlogic: Add support for GXL S805X and the P241 board ARM64: dts: amlogic: Add missing cooling device properties for CPUs ARM64: dts: meson-axg: add spdif output pins ARM64: dts: meson-axg: add s400 speaker amplifier ARM64: dts: meson-axg: add s400 main 12v supply ARM64: dts: meson-axg: add s400 microphone card leds ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 03:12:42 +0300