diff options
Diffstat (limited to 'tools/include/uapi/linux/lirc.h')
| -rw-r--r-- | tools/include/uapi/linux/lirc.h | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h new file mode 100644 index 000000000000..f189931042a7 --- /dev/null +++ b/tools/include/uapi/linux/lirc.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_SCANCODE 0x00000008 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 +#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound + */ +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) + +/* + * struct lirc_scancode - decoded scancode with protocol for use with + * LIRC_MODE_SCANCODE + * + * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR + * was decoded. + * @flags: should be 0 for transmit. When receiving scancodes, + * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set + * depending on the protocol + * @rc_proto: see enum rc_proto + * @keycode: the translated keycode. Set to 0 for transmit. + * @scancode: the scancode received or to be sent + */ +struct lirc_scancode { + __u64 timestamp; + __u16 flags; + __u16 rc_proto; + __u32 keycode; + __u64 scancode; +}; + +/* Set if the toggle bit of rc-5 or rc-6 is enabled */ +#define LIRC_SCANCODE_FLAG_TOGGLE 1 +/* Set if this is a nec or sanyo repeat */ +#define LIRC_SCANCODE_FLAG_REPEAT 2 + +/** + * enum rc_proto - the Remote Controller protocol + * + * @RC_PROTO_UNKNOWN: Protocol not known + * @RC_PROTO_OTHER: Protocol known but proprietary + * @RC_PROTO_RC5: Philips RC5 protocol + * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol + * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 + * @RC_PROTO_JVC: JVC protocol + * @RC_PROTO_SONY12: Sony 12 bit protocol + * @RC_PROTO_SONY15: Sony 15 bit protocol + * @RC_PROTO_SONY20: Sony 20 bit protocol + * @RC_PROTO_NEC: NEC protocol + * @RC_PROTO_NECX: Extended NEC protocol + * @RC_PROTO_NEC32: NEC 32 bit protocol + * @RC_PROTO_SANYO: Sanyo protocol + * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard + * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse + * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol + * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol + * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol + * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol + * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol + * @RC_PROTO_SHARP: Sharp protocol + * @RC_PROTO_XMP: XMP protocol + * @RC_PROTO_CEC: CEC protocol + * @RC_PROTO_IMON: iMon Pad protocol + */ +enum rc_proto { + RC_PROTO_UNKNOWN = 0, + RC_PROTO_OTHER = 1, + RC_PROTO_RC5 = 2, + RC_PROTO_RC5X_20 = 3, + RC_PROTO_RC5_SZ = 4, + RC_PROTO_JVC = 5, + RC_PROTO_SONY12 = 6, + RC_PROTO_SONY15 = 7, + RC_PROTO_SONY20 = 8, + RC_PROTO_NEC = 9, + RC_PROTO_NECX = 10, + RC_PROTO_NEC32 = 11, + RC_PROTO_SANYO = 12, + RC_PROTO_MCIR2_KBD = 13, + RC_PROTO_MCIR2_MSE = 14, + RC_PROTO_RC6_0 = 15, + RC_PROTO_RC6_6A_20 = 16, + RC_PROTO_RC6_6A_24 = 17, + RC_PROTO_RC6_6A_32 = 18, + RC_PROTO_RC6_MCE = 19, + RC_PROTO_SHARP = 20, + RC_PROTO_XMP = 21, + RC_PROTO_CEC = 22, + RC_PROTO_IMON = 23, +}; + +#endif |