diff options
Diffstat (limited to 'sound/soc/intel')
41 files changed, 1572 insertions, 1295 deletions
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index b3c7f554ec30..bb8be10b8437 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -1,19 +1,3 @@ -config SND_MFLD_MACHINE - tristate "SOC Machine Audio driver for Intel Medfield MID platform" - depends on INTEL_SCU_IPC - select SND_SOC_SN95031 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_PCI - help - This adds support for ASoC machine driver for Intel(R) MID Medfield platform - used as alsa device in audio substem in Intel(R) MID devices - Say Y if you have such a device. - If unsure select "N". - -config SND_SST_ATOM_HIFI2_PLATFORM - tristate - select SND_SOC_COMPRESS - config SND_SST_IPC tristate @@ -27,10 +11,12 @@ config SND_SST_IPC_ACPI select SND_SOC_INTEL_SST select IOSF_MBI +config SND_SOC_INTEL_COMMON + tristate + config SND_SOC_INTEL_SST tristate select SND_SOC_INTEL_SST_ACPI if ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI config SND_SOC_INTEL_SST_FIRMWARE tristate @@ -39,280 +25,42 @@ config SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_SST_ACPI tristate -config SND_SOC_INTEL_SST_MATCH +config SND_SOC_ACPI_INTEL_MATCH tristate + select SND_SOC_ACPI if ACPI + +config SND_SOC_INTEL_SST_TOPLEVEL + tristate "Intel ASoC SST drivers" + depends on X86 || COMPILE_TEST + select SND_SOC_INTEL_MACH + select SND_SOC_INTEL_COMMON config SND_SOC_INTEL_HASWELL - tristate + tristate "Intel ASoC SST driver for Haswell/Broadwell" + depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF + depends on DMADEVICES select SND_SOC_INTEL_SST select SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_BAYTRAIL - tristate - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE - -config SND_SOC_INTEL_HASWELL_MACH - tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT5640 - help - This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell - Ultrabook platforms. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH - tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_DA7219 - select SND_SOC_MAX98357A - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - select SND_HDA_DSP_LOADER - help - This adds support for ASoC machine driver for Broxton-P platforms - with DA7219 + MAX98357A I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BXT_RT298_MACH - tristate "ASoC Audio driver for Broxton with RT298 I2S mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT298 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - select SND_HDA_DSP_LOADER - help - This adds support for ASoC machine driver for Broxton platforms - with RT286 I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYT_RT5640_MACH - tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" - depends on X86_INTEL_LPSS && I2C + tristate "Intel ASoC SST driver for Baytrail (legacy)" + depends on SND_SOC_INTEL_SST_TOPLEVEL depends on DMADEVICES - depends on SND_SST_IPC_ACPI = n - select SND_SOC_INTEL_BAYTRAIL - select SND_SOC_RT5640 - help - This adds audio driver for Intel Baytrail platform based boards - with the RT5640 audio codec. This driver is deprecated, use - SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. - -config SND_SOC_INTEL_BYT_MAX98090_MACH - tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" - depends on X86_INTEL_LPSS && I2C - depends on DMADEVICES - depends on SND_SST_IPC_ACPI = n - select SND_SOC_INTEL_BAYTRAIL - select SND_SOC_MAX98090 - help - This adds audio driver for Intel Baytrail platform based boards - with the MAX98090 audio codec. - -config SND_SOC_INTEL_BDW_RT5677_MACH - tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec" - depends on X86_INTEL_LPSS && GPIOLIB && I2C - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT5677 - help - This adds support for Intel Broadwell platform based boards with - the RT5677 audio codec. - -config SND_SOC_INTEL_BROADWELL_MACH - tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT286 - help - This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell - Ultrabook platforms. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYTCR_RT5640_MACH - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec" - depends on X86 && I2C && ACPI - select SND_SOC_RT5640 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR - platforms with RT5640 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYTCR_RT5651_MACH - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec" - depends on X86 && I2C && ACPI - select SND_SOC_RT5651 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR - platforms with RT5651 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_RT5672_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_RT5670 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with RT5672 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_RT5645_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_RT5645 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with RT5645/5650 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_MAX98090 - select SND_SOC_TS3A227E - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with MAX98090 audio codec it also can support TI jack chip as aux device. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_DA7213_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_DA7213 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail - platforms with DA7212/7213 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_ES8316_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_ES8316 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail & - Cherrytrail platforms with ES8316 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for the MinnowBoard Max or - Up boards and provides access to I2S signals on the Low-Speed - connector - If unsure select "N". - -config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH - tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode" - depends on X86_INTEL_LPSS && I2C select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT5663 - select SND_SOC_MAX98927 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for RT5663 + MAX98927. - Say Y if you have such a device. - If unsure select "N". + select SND_SOC_INTEL_SST_FIRMWARE -config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH - tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" - depends on X86_INTEL_LPSS && I2C && SPI - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT5663 - select SND_SOC_RT5514 - select SND_SOC_RT5514_SPI - select SND_SOC_MAX98927 - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for RT5663 + RT5514 + MAX98927. - Say Y if you have such a device. - If unsure select "N". +config SND_SST_ATOM_HIFI2_PLATFORM + tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)" + depends on SND_SOC_INTEL_SST_TOPLEVEL && X86 + select SND_SOC_COMPRESS config SND_SOC_INTEL_SKYLAKE - tristate + tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL" + depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI select SND_HDA_EXT_CORE select SND_HDA_DSP_LOADER select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST -config SND_SOC_INTEL_SKL_RT286_MACH - tristate "ASoC Audio driver for SKL with RT286 I2S mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT286 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC machine driver for Skylake platforms - with RT286 I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH - tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode" - depends on X86_INTEL_LPSS && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_NAU8825 - select SND_SOC_SSM4567 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for NAU88L25 + SSM4567. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH - tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode" - depends on X86_INTEL_LPSS && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_NAU8825 - select SND_SOC_MAX98357A - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for NAU88L25 + MAX98357A. - Say Y if you have such a device. - If unsure select "N". +# ASoC codec drivers +source "sound/soc/intel/boards/Kconfig" diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile index cdd495f7ee2c..b973d457e834 100644 --- a/sound/soc/intel/Makefile +++ b/sound/soc/intel/Makefile @@ -1,5 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 # Core support -obj-$(CONFIG_SND_SOC_INTEL_SST) += common/ +obj-$(CONFIG_SND_SOC_INTEL_COMMON) += common/ # Platform Support obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/ diff --git a/sound/soc/intel/atom/Makefile b/sound/soc/intel/atom/Makefile index aa6548c6feab..1dc60471b399 100644 --- a/sound/soc/intel/atom/Makefile +++ b/sound/soc/intel/atom/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 snd-soc-sst-atom-hifi2-platform-objs := sst-mfld-platform-pcm.o \ sst-mfld-platform-compress.o \ sst-atom-controls.o diff --git a/sound/soc/intel/atom/sst-mfld-platform-compress.c b/sound/soc/intel/atom/sst-mfld-platform-compress.c index 1bead81bb510..1dbcab5a6ff0 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-compress.c +++ b/sound/soc/intel/atom/sst-mfld-platform-compress.c @@ -259,7 +259,7 @@ static int sst_platform_compr_set_metadata(struct snd_compr_stream *cstream, return stream->compr_ops->set_metadata(sst->dev, stream->id, metadata); } -struct snd_compr_ops sst_platform_compr_ops = { +const struct snd_compr_ops sst_platform_compr_ops = { .open = sst_platform_compr_open, .free = sst_platform_compr_free, diff --git a/sound/soc/intel/atom/sst-mfld-platform.h b/sound/soc/intel/atom/sst-mfld-platform.h index cb32cc7e5ec1..31a58c25472c 100644 --- a/sound/soc/intel/atom/sst-mfld-platform.h +++ b/sound/soc/intel/atom/sst-mfld-platform.h @@ -25,7 +25,7 @@ #include "sst-atom-controls.h" extern struct sst_device *sst; -extern struct snd_compr_ops sst_platform_compr_ops; +extern const struct snd_compr_ops sst_platform_compr_ops; #define SST_MONO 1 #define SST_STEREO 2 diff --git a/sound/soc/intel/atom/sst/Makefile b/sound/soc/intel/atom/sst/Makefile index fd21726361b5..795d1cf8f386 100644 --- a/sound/soc/intel/atom/sst/Makefile +++ b/sound/soc/intel/atom/sst/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 snd-intel-sst-core-objs := sst.o sst_ipc.o sst_stream.o sst_drv_interface.o sst_loader.o sst_pvt.o snd-intel-sst-pci-objs += sst_pci.o snd-intel-sst-acpi-objs += sst_acpi.o diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 0e928d54305d..32d6e02e2104 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/firmware.h> #include <linux/pm_runtime.h> @@ -41,9 +40,10 @@ #include <acpi/acpi_bus.h> #include <asm/cpu_device_id.h> #include <asm/iosf_mbi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> #include "../sst-mfld-platform.h" #include "../../common/sst-dsp.h" -#include "../../common/sst-acpi.h" #include "sst.h" /* LPE viewpoint addresses */ @@ -239,19 +239,26 @@ static int sst_platform_get_resources(struct intel_sst_drv *ctx) return 0; } +static int is_byt(void) +{ + bool status = false; + static const struct x86_cpu_id cpu_ids[] = { + { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ + {} + }; + if (x86_match_cpu(cpu_ids)) + status = true; + return status; +} static int is_byt_cr(struct device *dev, bool *bytcr) { int status = 0; if (IS_ENABLED(CONFIG_IOSF_MBI)) { - static const struct x86_cpu_id cpu_ids[] = { - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ - {} - }; u32 bios_status; - if (!x86_match_cpu(cpu_ids) || !iosf_mbi_available()) { + if (!is_byt() || !iosf_mbi_available()) { /* bail silently */ return status; } @@ -285,7 +292,7 @@ static int sst_acpi_probe(struct platform_device *pdev) int ret = 0; struct intel_sst_drv *ctx; const struct acpi_device_id *id; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; struct platform_device *mdev; struct platform_device *plat_dev; struct sst_platform_info *pdata; @@ -297,13 +304,17 @@ static int sst_acpi_probe(struct platform_device *pdev) return -ENODEV; dev_dbg(dev, "for %s\n", id->id); - mach = (struct sst_acpi_mach *)id->driver_data; - mach = sst_acpi_find_machine(mach); + mach = (struct snd_soc_acpi_mach *)id->driver_data; + mach = snd_soc_acpi_find_machine(mach); if (mach == NULL) { dev_err(dev, "No matching machine driver found\n"); return -ENODEV; } + if (is_byt()) + mach->pdata = &byt_rvp_platform_data; + else + mach->pdata = &chv_platform_data; pdata = mach->pdata; ret = kstrtouint(id->id, 16, &dev_id); @@ -381,286 +392,9 @@ static int sst_acpi_remove(struct platform_device *pdev) return 0; } -static unsigned long cht_machine_id; - -#define CHT_SURFACE_MACH 1 -#define BYT_THINKPAD_10 2 - -static int cht_surface_quirk_cb(const struct dmi_system_id *id) -{ - cht_machine_id = CHT_SURFACE_MACH; - return 1; -} - -static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id) -{ - cht_machine_id = BYT_THINKPAD_10; - return 1; -} - - -static const struct dmi_system_id byt_table[] = { - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), - }, - }, - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), - }, - }, - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), - }, - }, - { } -}; - -static const struct dmi_system_id cht_table[] = { - { - .callback = cht_surface_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), - }, - }, - { } -}; - - -static struct sst_acpi_mach cht_surface_mach = { - .id = "10EC5640", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data, -}; - -static struct sst_acpi_mach byt_thinkpad_10 = { - .id = "10EC5640", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data, -}; - -static struct sst_acpi_mach *cht_quirk(void *arg) -{ - struct sst_acpi_mach *mach = arg; - - dmi_check_system(cht_table); - - if (cht_machine_id == CHT_SURFACE_MACH) - return &cht_surface_mach; - else - return mach; -} - -static struct sst_acpi_mach *byt_quirk(void *arg) -{ - struct sst_acpi_mach *mach = arg; - - dmi_check_system(byt_table); - - if (cht_machine_id == BYT_THINKPAD_10) - return &byt_thinkpad_10; - else - return mach; -} - - -static struct sst_acpi_mach sst_acpi_bytcr[] = { - { - .id = "10EC5640", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .machine_quirk = byt_quirk, - .pdata = &byt_rvp_platform_data, - }, - { - .id = "10EC5642", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .pdata = &byt_rvp_platform_data - }, - { - .id = "INTCCFFD", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .pdata = &byt_rvp_platform_data - }, - { - .id = "10EC5651", - .drv_name = "bytcr_rt5651", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5651", - .pdata = &byt_rvp_platform_data - }, - { - .id = "DLGS7212", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_da7213", - .pdata = &byt_rvp_platform_data - }, - { - .id = "DLGS7213", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_da7213", - .pdata = &byt_rvp_platform_data - }, - /* some Baytrail platforms rely on RT5645, use CHT machine driver */ - { - .id = "10EC5645", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data - }, - { - .id = "10EC5648", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data - }, -#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) - /* - * This is always last in the table so that it is selected only when - * enabled explicitly and there is no codec-related information in SSDT - */ - { - .id = "80860F28", - .drv_name = "bytcht_nocodec", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_nocodec", - .pdata = &byt_rvp_platform_data - }, -#endif - {}, -}; - -/* Cherryview-based platforms: CherryTrail and Braswell */ -static struct sst_acpi_mach sst_acpi_chv[] = { - { - .id = "10EC5670", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5672", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5645", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5650", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC3270", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - - { - .id = "193C9890", - .drv_name = "cht-bsw-max98090", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "DLGS7212", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_da7213", - .pdata = &chv_platform_data - }, - { - .id = "DLGS7213", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_da7213", - .pdata = &chv_platform_data - }, - { - .id = "ESSX8316", - .drv_name = "bytcht_es8316", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_es8316", - .pdata = &chv_platform_data - }, - /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ - { - .id = "10EC5640", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5640", - .machine_quirk = cht_quirk, - .pdata = &chv_platform_data - }, - { - .id = "10EC3276", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5640", - .pdata = &chv_platform_data - }, - /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ - { - .id = "10EC5651", - .drv_name = "bytcr_rt5651", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5651", - .pdata = &chv_platform_data - }, -#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) - /* - * This is always last in the table so that it is selected only when - * enabled explicitly and there is no codec-related information in SSDT - */ - { - .id = "808622A8", - .drv_name = "bytcht_nocodec", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_nocodec", - .pdata = &chv_platform_data - }, -#endif - {}, -}; - static const struct acpi_device_id sst_acpi_ids[] = { - { "80860F28", (unsigned long)&sst_acpi_bytcr}, - { "808622A8", (unsigned long) &sst_acpi_chv}, + { "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines}, + { "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines}, { }, }; diff --git a/sound/soc/intel/atom/sst/sst_loader.c b/sound/soc/intel/atom/sst/sst_loader.c index 33917146d9c4..a686eef2cf7f 100644 --- a/sound/soc/intel/atom/sst/sst_loader.c +++ b/sound/soc/intel/atom/sst/sst_loader.c @@ -415,7 +415,6 @@ int sst_load_fw(struct intel_sst_drv *sst_drv_ctx) return ret_val; } - BUG_ON(!sst_drv_ctx->fw_in_mem); block = sst_create_block(sst_drv_ctx, 0, FW_DWNL_ID); if (block == NULL) return -ENOMEM; diff --git a/sound/soc/intel/atom/sst/sst_stream.c b/sound/soc/intel/atom/sst/sst_stream.c index 83d8dda15233..65e257b17a7e 100644 --- a/sound/soc/intel/atom/sst/sst_stream.c +++ b/sound/soc/intel/atom/sst/sst_stream.c @@ -45,7 +45,6 @@ int sst_alloc_stream_mrfld(struct intel_sst_drv *sst_drv_ctx, void *params) void *data = NULL; dev_dbg(sst_drv_ctx->dev, "Enter\n"); - BUG_ON(!params); str_params = (struct snd_sst_params *)params; memset(&alloc_param, 0, sizeof(alloc_param)); diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig new file mode 100644 index 000000000000..6f754708a48c --- /dev/null +++ b/sound/soc/intel/boards/Kconfig @@ -0,0 +1,265 @@ +config SND_SOC_INTEL_MACH + tristate "Intel Audio machine drivers" + depends on SND_SOC_INTEL_SST_TOPLEVEL + select SND_SOC_ACPI_INTEL_MATCH if ACPI + +if SND_SOC_INTEL_MACH + +config SND_MFLD_MACHINE + tristate "SOC Machine Audio driver for Intel Medfield MID platform" + depends on INTEL_SCU_IPC + select SND_SOC_SN95031 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_PCI + help + This adds support for ASoC machine driver for Intel(R) MID Medfield platform + used as alsa device in audio substem in Intel(R) MID devices + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_HASWELL_MACH + tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT5640 + help + This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell + Ultrabook platforms. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BDW_RT5677_MACH + tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec" + depends on X86_INTEL_LPSS && GPIOLIB && I2C + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT5677 + help + This adds support for Intel Broadwell platform based boards with + the RT5677 audio codec. + +config SND_SOC_INTEL_BROADWELL_MACH + tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT286 + help + This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell + Ultrabook platforms. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BYT_MAX98090_MACH + tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" + depends on X86_INTEL_LPSS && I2C + depends on SND_SST_IPC_ACPI = n + depends on SND_SOC_INTEL_BAYTRAIL + select SND_SOC_MAX98090 + help + This adds audio driver for Intel Baytrail platform based boards + with the MAX98090 audio codec. + +config SND_SOC_INTEL_BYT_RT5640_MACH + tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" + depends on X86_INTEL_LPSS && I2C + depends on SND_SST_IPC_ACPI = n + depends on SND_SOC_INTEL_BAYTRAIL + select SND_SOC_RT5640 + help + This adds audio driver for Intel Baytrail platform based boards + with the RT5640 audio codec. This driver is deprecated, use + SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. + +config SND_SOC_INTEL_BYTCR_RT5640_MACH + tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec" + depends on X86 && I2C && ACPI + select SND_SOC_RT5640 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5640 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BYTCR_RT5651_MACH + tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec" + depends on X86 && I2C && ACPI + select SND_SOC_RT5651 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5651 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5672_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5670 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5672 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5645_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5645 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5645/5650 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_MAX98090 + select SND_SOC_TS3A227E + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with MAX98090 audio codec it also can support TI jack chip as aux device. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_DA7213 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ES8316 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on X86_INTEL_LPSS && I2C && ACPI + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector + If unsure select "N". + +config SND_SOC_INTEL_SKL_RT286_MACH + tristate "ASoC Audio driver for SKL with RT286 I2S mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT286 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for Skylake platforms + with RT286 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH + tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode" + depends on X86_INTEL_LPSS && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_NAU8825 + select SND_SOC_SSM4567 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + SSM4567. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH + tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode" + depends on X86_INTEL_LPSS && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_NAU8825 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + MAX98357A. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH + tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_DA7219 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton-P platforms + with DA7219 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "ASoC Audio driver for Broxton with RT298 I2S mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH + tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode" + depends on X86_INTEL_LPSS && I2C + select SND_SOC_INTEL_SST + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT5663 + select SND_SOC_MAX98927 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + MAX98927. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH + tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" + depends on X86_INTEL_LPSS && I2C && SPI + select SND_SOC_INTEL_SST + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT5663 + select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI + select SND_SOC_MAX98927 + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + RT5514 + MAX98927. + Say Y if you have such a device. + If unsure select "N". + +endif diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index a5c5bc5732a2..69d2dfaeb00c 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 snd-soc-sst-haswell-objs := haswell.o snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index ce35ec7884d1..f8a91a6f2a17 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -55,20 +55,6 @@ enum { BXT_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *bxt_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, BXT_DIALOG_CODEC_DAI, - strlen(BXT_DIALOG_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -77,7 +63,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - codec_dai = bxt_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, BXT_DIALOG_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n"); return -EIO; diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c index 18873e23f404..c4d82ad41bd7 100644 --- a/sound/soc/intel/boards/bytcht_da7213.c +++ b/sound/soc/intel/boards/bytcht_da7213.c @@ -27,9 +27,9 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/soc-acpi.h> #include "../../codecs/da7213.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" static const struct snd_kcontrol_new controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), @@ -185,19 +185,11 @@ static struct snd_soc_dai_link dailink[] = { .dpcm_playback = 1, .ops = &aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -231,19 +223,18 @@ static char codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */ static int bytcht_da7213_probe(struct platform_device *pdev) { - int ret_val = 0; - int i; struct snd_soc_card *card; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; int dai_index = 0; + int ret_val = 0; + int i; mach = (&pdev->dev)->platform_data; card = &bytcht_da7213_card; card->dev = &pdev->dev; /* fix index of codec dai */ - dai_index = MERR_DPCM_COMPR + 1; for (i = 0; i < ARRAY_SIZE(dailink); i++) { if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) { dai_index = i; @@ -252,8 +243,8 @@ static int bytcht_da7213_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(codec_name, sizeof(codec_name), "%s%s", "i2c-", i2c_name); dailink[dai_index].codec_name = codec_name; diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 52635462dac6..8088396717e3 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -29,28 +29,14 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/soc-acpi.h> #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #include "../common/sst-dsp.h" struct byt_cht_es8316_private { struct clk *mclk; }; -#define CODEC_DAI1 "ES8316 HiFi" - -static inline struct snd_soc_dai *get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CODEC_DAI1, - strlen(CODEC_DAI1))) - return rtd->codec_dai; - } - return NULL; -} - static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), @@ -208,22 +194,13 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = { .ops = &byt_cht_es8316_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, - /* back ends */ { /* Only SSP2 has been tested here, so BYT-CR platforms that * require SSP0 will not work. */ .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c index 1dd9441806fa..b80ec027a0e8 100644 --- a/sound/soc/intel/boards/bytcht_nocodec.c +++ b/sound/soc/intel/boards/bytcht_nocodec.c @@ -133,19 +133,11 @@ static struct snd_soc_dai_link dais[] = { .dpcm_playback = 1, .ops = &aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-LowSpeed Connector", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 4a76b099a508..f2c0fc415e52 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -22,19 +22,19 @@ #include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/platform_sst_audio.h> -#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5640.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #include "../common/sst-dsp.h" enum { @@ -44,13 +44,13 @@ enum { BYT_RT5640_IN3_MAP, }; -#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff) +#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(7, 0)) #define BYT_RT5640_DMIC_EN BIT(16) #define BYT_RT5640_MONO_SPEAKER BIT(17) #define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */ -#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ -#define BYT_RT5640_SSP0_AIF1 BIT(20) -#define BYT_RT5640_SSP0_AIF2 BIT(21) +#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ +#define BYT_RT5640_SSP0_AIF1 BIT(20) +#define BYT_RT5640_SSP0_AIF2 BIT(21) #define BYT_RT5640_MCLK_EN BIT(22) #define BYT_RT5640_MCLK_25MHZ BIT(23) @@ -145,22 +145,6 @@ static void log_quirks(struct device *dev) #define BYT_CODEC_DAI1 "rt5640-aif1" #define BYT_CODEC_DAI2 "rt5640-aif2" -static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1, - strlen(BYT_CODEC_DAI1))) - return rtd->codec_dai; - if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2, - strlen(BYT_CODEC_DAI2))) - return rtd->codec_dai; - - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -170,7 +154,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); int ret; - codec_dai = byt_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); + if (!codec_dai) + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); + if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); @@ -178,7 +165,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, } if (SND_SOC_DAPM_EVENT_ON(event)) { - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(card->dev, @@ -199,7 +186,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, 48000 * 512, SND_SOC_CLOCK_IN); if (!ret) { - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) clk_disable_unprepare(priv->mclk); } } @@ -376,8 +363,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -385,12 +372,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | - BYT_RT5640_MCLK_EN - ), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -398,9 +384,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "DellInc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"), }, - .driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP | - BYT_RT5640_DMIC_EN | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_DMIC2_MAP | + BYT_RT5640_DMIC_EN | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -408,8 +394,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -417,8 +403,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), }, - .driver_data = (unsigned long *)(BYT_RT5640_DMIC1_MAP | - BYT_RT5640_DMIC_EN), + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_DMIC_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -426,9 +412,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), DMI_MATCH(DMI_BOARD_NAME, "tPAD"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP | - BYT_RT5640_MCLK_EN | - BYT_RT5640_SSP0_AIF1), + .driver_data = (void *)(BYT_RT5640_IN3_MAP | + BYT_RT5640_MCLK_EN | + BYT_RT5640_SSP0_AIF1), }, { .callback = byt_rt5640_quirk_cb, @@ -436,7 +422,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | + .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_MCLK_EN | BYT_RT5640_SSP0_AIF1), @@ -446,9 +432,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP | - BYT_RT5640_MCLK_EN | - BYT_RT5640_SSP0_AIF1), + .driver_data = (void *)(BYT_RT5640_IN3_MAP | + BYT_RT5640_MCLK_EN | + BYT_RT5640_SSP0_AIF1), }, {} @@ -456,12 +442,12 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) { - int ret; - struct snd_soc_codec *codec = runtime->codec; struct snd_soc_card *card = runtime->card; - const struct snd_soc_dapm_route *custom_map; struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_codec *codec = runtime->codec; + const struct snd_soc_dapm_route *custom_map; int num_routes; + int ret; card->dapm.idle_bias_off = true; @@ -549,7 +535,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { /* * The firmware might enable the clock at * boot (this information may or may not @@ -693,18 +679,10 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = { .dpcm_playback = 1, .ops = &byt_rt5640_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Baytrail Compressed Port", - .stream_name = "Baytrail Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", /* overwritten for ssp0 routing */ .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -758,12 +736,12 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) { - int ret_val = 0; - struct sst_acpi_mach *mach; + struct byt_rt5640_private *priv; + struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; + int ret_val = 0; + int dai_index = 0; int i; - int dai_index; - struct byt_rt5640_private *priv; is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); @@ -776,7 +754,6 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(&byt_rt5640_card, priv); /* fix index of codec dai */ - dai_index = MERR_DPCM_COMPR + 1; for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) { if (!strcmp(byt_rt5640_dais[i].codec_name, "i2c-10EC5640:00")) { dai_index = i; @@ -785,8 +762,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name), "%s%s", "i2c-", i2c_name); @@ -819,7 +796,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) /* format specified: 2 64-bit integers */ struct acpi_buffer format = {sizeof("NN"), "NN"}; struct acpi_buffer state = {0, NULL}; - struct sst_acpi_package_context pkg_ctx; + struct snd_soc_acpi_package_context pkg_ctx; bool pkg_found = false; state.length = sizeof(chan_package); @@ -831,7 +808,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) pkg_ctx.state = &state; pkg_ctx.data_valid = false; - pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx); + pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, + &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); @@ -891,7 +869,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) byt_rt5640_cpu_dai_name; } - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { ret_val = PTR_ERR(priv->mclk); diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 4a3516b38c2c..d955836c6870 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -21,24 +21,124 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <asm/platform_sst_audio.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5651.h" #include "../atom/sst-atom-controls.h" +enum { + BYT_RT5651_DMIC_MAP, + BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, +}; + +#define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) +#define BYT_RT5651_DMIC_EN BIT(16) +#define BYT_RT5651_MCLK_EN BIT(17) +#define BYT_RT5651_MCLK_25MHZ BIT(18) + +struct byt_rt5651_private { + struct clk *mclk; + struct snd_soc_jack jack; +}; + +static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP | + BYT_RT5651_DMIC_EN | + BYT_RT5651_MCLK_EN; + +static void log_quirks(struct device *dev) +{ + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) + dev_info(dev, "quirk DMIC_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) + dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); + if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) + dev_info(dev, "quirk DMIC enabled"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) + dev_info(dev, "quirk MCLK_EN enabled"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) + dev_info(dev, "quirk MCLK_25MHZ enabled"); +} + +#define BYT_CODEC_DAI1 "rt5651-aif1" + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); + if (!codec_dai) { + dev_err(card->dev, + "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } + ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, + 48000 * 512, + SND_SOC_CLOCK_IN); + } else { + /* + * Set codec clock source to internal clock before + * turning off the platform clock. Codec needs clock + * for Jack detection and button press + */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, + 48000 * 512, + SND_SOC_CLOCK_IN); + if (!ret) + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) + clk_disable_unprepare(priv->mclk); + } + + if (ret < 0) { + dev_err(card->dev, "can't set codec sysclk: %d\n", ret); + return ret; + } + + return 0; +} + static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Internal Mic", NULL), SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + }; static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Internal Mic", NULL, "Platform Clock"}, + {"Speaker", NULL, "Platform Clock"}, + {"AIF1 Playback", NULL, "ssp2 Tx"}, {"ssp2 Tx", NULL, "codec_out0"}, {"ssp2 Tx", NULL, "codec_out1"}, @@ -47,38 +147,30 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"ssp2 Rx", NULL, "AIF1 Capture"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ - {"IN2P", NULL, "Headset Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, {"Speaker", NULL, "LOUTR"}, }; -static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic1_map[] = { - {"DMIC1", NULL, "Internal Mic"}, -}; - -static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic2_map[] = { - {"DMIC2", NULL, "Internal Mic"}, +static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { + {"IN2P", NULL, "Headset Mic"}, + {"DMIC L1", NULL, "Internal Mic"}, + {"DMIC R1", NULL, "Internal Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Headset Mic"}, {"IN1P", NULL, "Internal Mic"}, }; -enum { - BYT_RT5651_DMIC1_MAP, - BYT_RT5651_DMIC2_MAP, - BYT_RT5651_IN1_MAP, +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN1P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Internal Mic"}, }; -#define BYT_RT5651_MAP(quirk) ((quirk) & 0xff) -#define BYT_RT5651_DMIC_EN BIT(16) - -static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC1_MAP | - BYT_RT5651_DMIC_EN; - static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -86,6 +178,17 @@ static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Speaker"), }; +static struct snd_soc_jack_pin bytcr_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -103,9 +206,26 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, return ret; } - ret = snd_soc_dai_set_pll(codec_dai, 0, RT5651_PLL1_S_BCLK1, - params_rate(params) * 50, - params_rate(params) * 512); + if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { + /* 2x25 bit slots on SSP2 */ + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_BCLK1, + params_rate(params) * 50, + params_rate(params) * 512); + } else { + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) { + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_MCLK, + 25000000, + params_rate(params) * 512); + } else { + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_MCLK, + 19200000, + params_rate(params) * 512); + } + } + if (ret < 0) { dev_err(rtd->dev, "can't set codec pll: %d\n", ret); return ret; @@ -114,33 +234,60 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, return 0; } +static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) +{ + byt_rt5651_quirk = (unsigned long)id->driver_data; + return 1; +} + static const struct dmi_system_id byt_rt5651_quirk_table[] = { + { + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), + DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), + }, + .driver_data = (void *)(BYT_RT5651_DMIC_MAP | + BYT_RT5651_DMIC_EN), + }, + { + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), + DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), + }, + .driver_data = (void *)(BYT_RT5651_IN2_MAP), + }, {} }; static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) { - int ret; struct snd_soc_card *card = runtime->card; + struct snd_soc_codec *codec = runtime->codec; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); const struct snd_soc_dapm_route *custom_map; int num_routes; + int ret; card->dapm.idle_bias_off = true; - dmi_check_system(byt_rt5651_quirk_table); switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { case BYT_RT5651_IN1_MAP: custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; - case BYT_RT5651_DMIC2_MAP: - custom_map = byt_rt5651_intmic_dmic2_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic2_map); + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); break; default: - custom_map = byt_rt5651_intmic_dmic1_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic1_map); + custom_map = byt_rt5651_intmic_dmic_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); } + ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); + if (ret) + return ret; ret = snd_soc_add_card_controls(card, byt_rt5651_controls, ARRAY_SIZE(byt_rt5651_controls)); @@ -151,6 +298,40 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk); + + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) + ret = clk_set_rate(priv->mclk, 25000000); + else + ret = clk_set_rate(priv->mclk, 19200000); + + if (ret) + dev_err(card->dev, "unable to set MCLK rate\n"); + } + + ret = snd_soc_card_jack_new(runtime->card, "Headset", + SND_JACK_HEADSET, &priv->jack, + bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins)); + if (ret) { + dev_err(runtime->dev, "Headset jack creation failed %d\n", ret); + return ret; + } + + rt5651_set_jack_detect(codec, &priv->jack); + return ret; } @@ -253,19 +434,11 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = { .dpcm_playback = 1, .ops = &byt_rt5651_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -296,13 +469,65 @@ static struct snd_soc_card byt_rt5651_card = { .fully_routed = true, }; +static char byt_rt5651_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */ + static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { + struct byt_rt5651_private *priv; + struct snd_soc_acpi_mach *mach; + const char *i2c_name = NULL; int ret_val = 0; + int dai_index = 0; + int i; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); + if (!priv) + return -ENOMEM; /* register the soc card */ byt_rt5651_card.dev = &pdev->dev; + mach = byt_rt5651_card.dev->platform_data; + snd_soc_card_set_drvdata(&byt_rt5651_card, priv); + + /* fix index of codec dai */ + for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { + if (!strcmp(byt_rt5651_dais[i].codec_name, "i2c-10EC5651:00")) { + dai_index = i; + break; + } + } + + /* fixup codec name based on HID */ + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { + snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), + "%s%s", "i2c-", i2c_name); + + byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; + } + + /* check quirks before creating card */ + dmi_check_system(byt_rt5651_quirk_table); + log_quirks(&pdev->dev); + + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(priv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(priv->mclk)); + /* + * Fall back to bit clock usage for -ENOENT (clock not + * available likely due to missing dependencies), bail + * for all other errors, including -EPROBE_DEFER + */ + if (ret_val != -ENOENT) + return ret_val; + byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; + } + } + ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); if (ret_val) { diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c index 20755ecc7f9e..d3e1c7e12004 100644 --- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c +++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -35,15 +36,48 @@ #define CHT_CODEC_DAI "HiFi" struct cht_mc_private { + struct clk *mclk; struct snd_soc_jack jack; bool ts3a227e_present; }; +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } else { + clk_disable_unprepare(ctx->mclk); + } + + return 0; +} + static const struct snd_soc_dapm_widget cht_dapm_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Int Mic", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route cht_audio_map[] = { @@ -60,6 +94,10 @@ static const struct snd_soc_dapm_route cht_audio_map[] = { {"codec_in0", NULL, "ssp2 Rx" }, {"codec_in1", NULL, "ssp2 Rx" }, {"ssp2 Rx", NULL, "HiFi Capture"}, + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Int Mic", NULL, "Platform Clock"}, + {"Ext Spk", NULL, "Platform Clock"}, }; static const struct snd_kcontrol_new cht_mc_controls[] = { @@ -109,6 +147,40 @@ static struct notifier_block cht_jack_nb = { .notifier_call = cht_ti_jack_event, }; +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static struct snd_soc_jack_gpio hs_jack_gpios[] = { + { + .name = "hp", + .report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT, + .debounce_time = 200, + }, + { + .name = "mic", + .invert = 1, + .report = SND_JACK_MICROPHONE, + .debounce_time = 200, + }, +}; + +static const struct acpi_gpio_params hp_gpios = { 0, 0, false }; +static const struct acpi_gpio_params mic_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_max98090_gpios[] = { + { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 }, + {}, +}; + static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) { int ret; @@ -116,30 +188,55 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); struct snd_soc_jack *jack = &ctx->jack; - /** - * TI supports 4 butons headset detection - * KEY_MEDIA - * KEY_VOICECOMMAND - * KEY_VOLUMEUP - * KEY_VOLUMEDOWN - */ - if (ctx->ts3a227e_present) - jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3; - else - jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE; + if (ctx->ts3a227e_present) { + /* + * The jack has already been created in the + * cht_max98090_headset_init() function. + */ + snd_soc_jack_notifier_register(jack, &cht_jack_nb); + return 0; + } - ret = snd_soc_card_jack_new(runtime->card, "Headset Jack", - jack_type, jack, NULL, 0); + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE; + ret = snd_soc_card_jack_new(runtime->card, "Headset Jack", + jack_type, jack, + hs_jack_pins, ARRAY_SIZE(hs_jack_pins)); if (ret) { dev_err(runtime->dev, "Headset Jack creation failed %d\n", ret); return ret; } - if (ctx->ts3a227e_present) - snd_soc_jack_notifier_register(jack, &cht_jack_nb); + ret = snd_soc_jack_add_gpiods(runtime->card->dev->parent, jack, + ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + if (ret) { + /* + * flag error but don't bail if jack detect is broken + * due to platform issues or bad BIOS/configuration + */ + dev_err(runtime->dev, + "jack detection gpios not added, error %d\n", ret); + } + + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) + dev_err(runtime->dev, "unable to set MCLK rate\n"); return ret; } @@ -160,7 +257,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, return ret; } - fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF + fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; ret = snd_soc_dai_set_fmt(rtd->cpu_dai, fmt); @@ -173,8 +270,8 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, rate->min = rate->max = 48000; channels->min = channels->max = 2; - /* set SSP2 to 24-bit */ - params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + /* set SSP2 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); return 0; } @@ -188,8 +285,29 @@ static int cht_max98090_headset_init(struct snd_soc_component *component) { struct snd_soc_card *card = component->card; struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + struct snd_soc_jack *jack = &ctx->jack; + int jack_type; + int ret; - return ts3a227e_enable_jack_detect(component, &ctx->jack); + /* + * TI supports 4 butons headset detection + * KEY_MEDIA + * KEY_VOICECOMMAND + * KEY_VOLUMEUP + * KEY_VOLUMEDOWN + */ + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3; + + ret = snd_soc_card_jack_new(card, "Headset Jack", jack_type, + jack, NULL, 0); + if (ret) { + dev_err(card->dev, "Headset Jack creation failed %d\n", ret); + return ret; + } + + return ts3a227e_enable_jack_detect(component, jack); } static const struct snd_soc_ops cht_aif1_ops = { @@ -232,18 +350,10 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -277,6 +387,7 @@ static struct snd_soc_card snd_soc_card_cht = { static int snd_cht_mc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int ret_val = 0; struct cht_mc_private *drv; @@ -289,11 +400,25 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* no need probe TI jack detection chip */ snd_soc_card_cht.aux_dev = NULL; snd_soc_card_cht.num_aux_devs = 0; + + ret_val = devm_acpi_dev_add_driver_gpios(dev->parent, + acpi_max98090_gpios); + if (ret_val) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); } /* register the soc card */ snd_soc_card_cht.dev = &pdev->dev; snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); + + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); + } + ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht); if (ret_val) { dev_err(&pdev->dev, diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c index 5bcde01d15e6..18d129caa974 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5645.c +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c @@ -21,20 +21,20 @@ */ #include <linux/module.h> -#include <linux/acpi.h> #include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/clk.h> #include <linux/dmi.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/platform_sst_audio.h> -#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5645.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #define CHT_PLAT_CLK_3_HZ 19200000 #define CHT_CODEC_DAI1 "rt5645-aif1" @@ -53,7 +53,7 @@ struct cht_mc_private { struct clk *mclk; }; -#define CHT_RT5645_MAP(quirk) ((quirk) & 0xff) +#define CHT_RT5645_MAP(quirk) ((quirk) & GENMASK(7, 0)) #define CHT_RT5645_SSP2_AIF2 BIT(16) /* default is using AIF1 */ #define CHT_RT5645_SSP0_AIF1 BIT(17) #define CHT_RT5645_SSP0_AIF2 BIT(18) @@ -70,21 +70,6 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk SSP0_AIF2 enabled"); } -static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI1, - strlen(CHT_CODEC_DAI1))) - return rtd->codec_dai; - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI2, - strlen(CHT_CODEC_DAI2))) - return rtd->codec_dai; - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -94,20 +79,21 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); int ret; - codec_dai = cht_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI1); + if (!codec_dai) + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI2); + if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; } if (SND_SOC_DAPM_EVENT_ON(event)) { - if (ctx->mclk) { - ret = clk_prepare_enable(ctx->mclk); - if (ret < 0) { - dev_err(card->dev, - "could not configure MCLK state"); - return ret; - } + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; } } else { /* Set codec sysclk source to its internal clock because codec PLL will @@ -122,8 +108,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return ret; } - if (ctx->mclk) - clk_disable_unprepare(ctx->mclk); + clk_disable_unprepare(ctx->mclk); } return 0; @@ -258,11 +243,11 @@ static const struct dmi_system_id cht_rt5645_quirk_table[] = { static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) { - int ret; - int jack_type; - struct snd_soc_codec *codec = runtime->codec; struct snd_soc_card *card = runtime->card; struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); + struct snd_soc_codec *codec = runtime->codec; + int jack_type; + int ret; if ((cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) || (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) { @@ -320,26 +305,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack); - if (ctx->mclk) { - /* - * The firmware might enable the clock at - * boot (this information may or may not - * be reflected in the enable clock register). - * To change the rate we must disable the clock - * first to cover these cases. Due to common - * clock framework restrictions that do not allow - * to disable a clock that has not been enabled, - * we need to enable the clock first. - */ - ret = clk_prepare_enable(ctx->mclk); - if (!ret) - clk_disable_unprepare(ctx->mclk); - ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) + dev_err(runtime->dev, "unable to set MCLK rate\n"); - if (ret) - dev_err(runtime->dev, "unable to set MCLK rate\n"); - } return ret; } @@ -460,19 +445,11 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -545,15 +522,15 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_cht_mc_probe(struct platform_device *pdev) { - int ret_val = 0; - int i; - struct cht_mc_private *drv; struct snd_soc_card *card = snd_soc_cards[0].soc_card; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; + struct cht_mc_private *drv; const char *i2c_name = NULL; - int dai_index = 0; bool found = false; bool is_bytcr = false; + int dai_index = 0; + int ret_val = 0; + int i; drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC); if (!drv) @@ -589,8 +566,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name), "%s%s", "i2c-", i2c_name); cht_dailink[dai_index].codec_name = cht_rt5645_codec_name; @@ -622,7 +599,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* format specified: 2 64-bit integers */ struct acpi_buffer format = {sizeof("NN"), "NN"}; struct acpi_buffer state = {0, NULL}; - struct sst_acpi_package_context pkg_ctx; + struct snd_soc_acpi_package_context pkg_ctx; bool pkg_found = false; state.length = sizeof(chan_package); @@ -634,7 +611,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev) pkg_ctx.state = &state; pkg_ctx.data_valid = false; - pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx); + pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, + &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); @@ -682,14 +660,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev) cht_rt5645_cpu_dai_name; } - if (is_valleyview()) { - drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); - if (IS_ERR(drv->mclk)) { - dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %ld\n", - PTR_ERR(drv->mclk)); - return PTR_ERR(drv->mclk); - } + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); } snd_soc_card_set_drvdata(card, drv); diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index f597d5582223..f8f21eee9b2d 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -20,14 +20,14 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/clk.h> -#include <asm/cpu_device_id.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5670.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" + /* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */ #define CHT_PLAT_CLK_3_HZ 19200000 @@ -51,18 +51,6 @@ static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { }, }; -static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI, - strlen(CHT_CODEC_DAI))) - return rtd->codec_dai; - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -72,7 +60,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); int ret; - codec_dai = cht_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; @@ -315,20 +303,12 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* Back End DAI links */ { /* SSP2 - Codec */ .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -348,9 +328,11 @@ static struct snd_soc_dai_link cht_dailink[] = { static int cht_suspend_pre(struct snd_soc_card *card) { struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); list_for_each_entry(component, &card->component_dev_list, card_list) { - if (!strcmp(component->name, "i2c-10EC5670:00")) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { struct snd_soc_codec *codec = snd_soc_component_to_codec(component); dev_dbg(codec->dev, "disabling jack detect before going to suspend.\n"); @@ -364,9 +346,11 @@ static int cht_suspend_pre(struct snd_soc_card *card) static int cht_resume_post(struct snd_soc_card *card) { struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); list_for_each_entry(component, &card->component_dev_list, card_list) { - if (!strcmp(component->name, "i2c-10EC5670:00")) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { struct snd_soc_codec *codec = snd_soc_component_to_codec(component); dev_dbg(codec->dev, "enabling jack detect for resume.\n"); @@ -380,7 +364,7 @@ static int cht_resume_post(struct snd_soc_card *card) /* SoC card */ static struct snd_soc_card snd_soc_card_cht = { - .name = "cherrytrailcraudio", + .name = "cht-bsw-rt5672", .owner = THIS_MODULE, .dai_link = cht_dailink, .num_links = ARRAY_SIZE(cht_dailink), @@ -394,25 +378,13 @@ static struct snd_soc_card snd_soc_card_cht = { .resume_post = cht_resume_post, }; -static bool is_valleyview(void) -{ - static const struct x86_cpu_id cpu_ids[] = { - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ - {} - }; - - if (!x86_match_cpu(cpu_ids)) - return false; - return true; -} - #define RT5672_I2C_DEFAULT "i2c-10EC5670:00" static int snd_cht_mc_probe(struct platform_device *pdev) { int ret_val = 0; struct cht_mc_private *drv; - struct sst_acpi_mach *mach = pdev->dev.platform_data; + struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; const char *i2c_name; int i; @@ -424,7 +396,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* fixup codec name based on HID */ if (mach) { - i2c_name = sst_acpi_find_name_from_hid(mach->id); + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); if (i2c_name) { snprintf(drv->codec_name, sizeof(drv->codec_name), "i2c-%s", i2c_name); @@ -439,14 +411,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev) } } - if (is_valleyview()) { - drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); - if (IS_ERR(drv->mclk)) { - dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %ld\n", - PTR_ERR(drv->mclk)); - return PTR_ERR(drv->mclk); - } + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); } snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 7f7607420706..6f9a8bcf20f3 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -17,6 +17,7 @@ * GNU General Public License for more details. */ +#include <linux/input.h> #include <linux/module.h> #include <linux/platform_device.h> #include <sound/core.h> @@ -208,6 +209,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd) int ret; struct kbl_rt5663_private *ctx = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_jack *jack; /* * Headset buttons map to the google Reference headset. @@ -221,6 +223,13 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd) dev_err(rtd->dev, "Headset Jack creation failed %d\n", ret); return ret; } + + jack = &ctx->kabylake_headset; + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); + rt5663_set_jack_detect(codec, &ctx->kabylake_headset); return ret; } @@ -341,13 +350,28 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + struct snd_soc_dpcm *dpcm = container_of( + params, struct snd_soc_dpcm, hw_params); + struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; + struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; - /* The ADSP will convert the FE rate to 48k, stereo */ - rate->min = rate->max = 48000; - channels->min = channels->max = 2; - /* set SSP1 to 24 bit */ - snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + /* + * The ADSP will convert the FE rate to 48k, stereo, 24 bit + */ + if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || + !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || + !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + snd_mask_none(fmt); + snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + } + /* + * The speaker on the SSP0 supports S16_LE and not S24_LE. + * thus changing the mask here + */ + if (!strcmp(be_dai_link->name, "SSP0-Codec")) + snd_mask_set(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; } @@ -390,6 +414,43 @@ static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } +static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int ret = 0, j; + + for (j = 0; j < rtd->num_codecs; j++) { + struct snd_soc_dai *codec_dai = rtd->codec_dais[j]; + + if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) { + /* + * Use channel 4 and 5 for the first amp + */ + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + } + if (!strcmp(codec_dai->component->name, MAXIM_DEV1_NAME)) { + /* + * Use channel 6 and 7 for the second amp + */ + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xC0, 3, 8, 16); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + } + } + return ret; +} + +static struct snd_soc_ops kabylake_ssp0_ops = { + .hw_params = kabylake_ssp0_hw_params, +}; + static unsigned int channels_dmic[] = { 2, 4, }; @@ -593,12 +654,13 @@ static struct snd_soc_dai_link kabylake_dais[] = { .no_pcm = 1, .codecs = max98927_codec_components, .num_codecs = ARRAY_SIZE(max98927_codec_components), - .dai_fmt = SND_SOC_DAIFMT_I2S | + .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, .be_hw_params_fixup = kabylake_ssp_fixup, .dpcm_playback = 1, + .ops = &kabylake_ssp0_ops, }, { /* SSP1 - Codec */ diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 88ff54220007..6072164f2d43 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -302,6 +302,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || + !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { rate->min = rate->max = 48000; channels->min = channels->max = 2; @@ -604,6 +605,8 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) { codec = pcm->codec_dai->codec; + snprintf(jack_name, sizeof(jack_name), + "HDMI/DP,pcm=%d Jack", pcm->device); err = snd_soc_card_jack_new(card, jack_name, SND_JACK_AVOUT, &ctx->kabylake_hdmi[i], NULL, 0); diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index 5ed0aa27b467..1b5a689dc99b 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -54,20 +54,6 @@ enum { SKL_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI, - strlen(SKL_NUVOTON_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -76,7 +62,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_dai *codec_dai; int ret; - codec_dai = skl_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 01b8b140bb08..7bea4bc77481 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -57,20 +57,6 @@ enum { SKL_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI, - strlen(SKL_NUVOTON_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static const struct snd_kcontrol_new skylake_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -86,7 +72,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_dai *codec_dai; int ret; - codec_dai = skl_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found\n"); return -EIO; diff --git a/sound/soc/intel/common/Makefile b/sound/soc/intel/common/Makefile index 1a35149bcad7..7379d8830c39 100644 --- a/sound/soc/intel/common/Makefile +++ b/sound/soc/intel/common/Makefile @@ -1,10 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 snd-soc-sst-dsp-objs := sst-dsp.o snd-soc-sst-acpi-objs := sst-acpi.o -snd-soc-sst-match-objs := sst-match-acpi.o snd-soc-sst-ipc-objs := sst-ipc.o snd-soc-sst-firmware-objs := sst-firmware.o +snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-match.o soc-acpi-intel-hsw-bdw-match.o obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o -obj-$(CONFIG_SND_SOC_INTEL_SST_MATCH) += snd-soc-sst-match.o obj-$(CONFIG_SND_SOC_INTEL_SST_FIRMWARE) += snd-soc-sst-firmware.o +obj-$(CONFIG_SND_SOC_ACPI_INTEL_MATCH) += snd-soc-acpi-intel-match.o diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c new file mode 100644 index 000000000000..bfe1ca68a542 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c @@ -0,0 +1,196 @@ +/* + * soc-apci-intel-byt-match.c - tables and support for BYT ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +static unsigned long byt_machine_id; + +#define BYT_THINKPAD_10 1 + +static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id) +{ + byt_machine_id = BYT_THINKPAD_10; + return 1; +} + + +static const struct dmi_system_id byt_table[] = { + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), + }, + }, + { } +}; + +static struct snd_soc_acpi_mach byt_thinkpad_10 = { + .id = "10EC5640", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", +}; + +static struct snd_soc_acpi_mach *byt_quirk(void *arg) +{ + struct snd_soc_acpi_mach *mach = arg; + + dmi_check_system(byt_table); + + if (byt_machine_id == BYT_THINKPAD_10) + return &byt_thinkpad_10; + else + return mach; +} + +struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_legacy_machines[] = { + { + .id = "10EC5640", + .drv_name = "byt-rt5640", + .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master", + }, + { + .id = "193C9890", + .drv_name = "byt-max98090", + .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_legacy_machines); + +struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { + { + .id = "10EC5640", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .machine_quirk = byt_quirk, + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5642", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "INTCCFFD", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5651", + .drv_name = "bytcr_rt5651", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5651", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5651.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7212", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7213", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some Baytrail platforms rely on RT5645, use CHT machine driver */ + { + .id = "10EC5645", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5648", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* use CHT driver to Baytrail Chromebooks */ + { + .id = "193C9890", + .drv_name = "cht-bsw-max98090", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-max98090.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + { + .id = "80860F28", + .drv_name = "bytcht_nocodec", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_nocodec", + }, +#endif + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c new file mode 100644 index 000000000000..b50a0d53846b --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -0,0 +1,194 @@ +/* + * soc-apci-intel-cht-match.c - tables and support for CHT ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +static unsigned long cht_machine_id; + +#define CHT_SURFACE_MACH 1 + +static int cht_surface_quirk_cb(const struct dmi_system_id *id) +{ + cht_machine_id = CHT_SURFACE_MACH; + return 1; +} + +static const struct dmi_system_id cht_table[] = { + { + .callback = cht_surface_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), + }, + }, + { } +}; + +static struct snd_soc_acpi_mach cht_surface_mach = { + .id = "10EC5640", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", +}; + +static struct snd_soc_acpi_mach *cht_quirk(void *arg) +{ + struct snd_soc_acpi_mach *mach = arg; + + dmi_check_system(cht_table); + + if (cht_machine_id == CHT_SURFACE_MACH) + return &cht_surface_mach; + else + return mach; +} + +/* Cherryview-based platforms: CherryTrail and Braswell */ +struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { + { + .id = "10EC5670", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5672", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5645", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5650", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC3270", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "193C9890", + .drv_name = "cht-bsw-max98090", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-max98090.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7212", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7213", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "ESSX8316", + .drv_name = "bytcht_es8316", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_es8316", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-es8316.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ + { + .id = "10EC5640", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5640", + .machine_quirk = cht_quirk, + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC3276", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ + { + .id = "10EC5651", + .drv_name = "bytcr_rt5651", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5651", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5651.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + { + .id = "808622A8", + .drv_name = "bytcht_nocodec", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_nocodec", + }, +#endif + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_cherrytrail_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c new file mode 100644 index 000000000000..e0e8c8c27528 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c @@ -0,0 +1,64 @@ +/* + * soc-apci-intel-hsw-bdw-match.c - tables and support for ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +struct snd_soc_acpi_mach snd_soc_acpi_intel_haswell_machines[] = { + { + .id = "INT33CA", + .drv_name = "haswell-audio", + .fw_filename = "intel/IntcSST1.bin", + .sof_fw_filename = "intel/reef-hsw.ri", + .sof_tplg_filename = "intel/reef-hsw.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_haswell_machines); + +struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[] = { + { + .id = "INT343A", + .drv_name = "broadwell-audio", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + { + .id = "RT5677CE", + .drv_name = "bdw-rt5677", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + { + .id = "INT33CA", + .drv_name = "haswell-audio", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt5640.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_broadwell_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/sst-acpi.c b/sound/soc/intel/common/sst-acpi.c index 1285cc597b6b..cf6fbbd4e378 100644 --- a/sound/soc/intel/common/sst-acpi.c +++ b/sound/soc/intel/common/sst-acpi.c @@ -21,7 +21,8 @@ #include <linux/platform_device.h> #include "sst-dsp.h" -#include "sst-acpi.h" +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> #define SST_LPT_DSP_DMA_ADDR_OFFSET 0x0F0000 #define SST_WPT_DSP_DMA_ADDR_OFFSET 0x0FE000 @@ -30,7 +31,7 @@ /* Descriptor for setting up SST platform data */ struct sst_acpi_desc { const char *drv_name; - struct sst_acpi_mach *machines; + struct snd_soc_acpi_mach *machines; /* Platform resource indexes. Must set to -1 if not used */ int resindex_lpe_base; int resindex_pcicfg_base; @@ -49,7 +50,7 @@ struct sst_acpi_priv { struct platform_device *pdev_pcm; struct sst_pdata sst_pdata; struct sst_acpi_desc *desc; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; }; static void sst_acpi_fw_cb(const struct firmware *fw, void *context) @@ -59,7 +60,7 @@ static void sst_acpi_fw_cb(const struct firmware *fw, void *context) struct sst_acpi_priv *sst_acpi = platform_get_drvdata(pdev); struct sst_pdata *sst_pdata = &sst_acpi->sst_pdata; struct sst_acpi_desc *desc = sst_acpi->desc; - struct sst_acpi_mach *mach = sst_acpi->mach; + struct snd_soc_acpi_mach *mach = sst_acpi->mach; sst_pdata->fw = fw; if (!fw) { @@ -85,7 +86,7 @@ static int sst_acpi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct sst_acpi_priv *sst_acpi; struct sst_pdata *sst_pdata; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; struct sst_acpi_desc *desc; struct resource *mmio; int ret = 0; @@ -99,7 +100,7 @@ static int sst_acpi_probe(struct platform_device *pdev) return -ENODEV; desc = (struct sst_acpi_desc *)id->driver_data; - mach = sst_acpi_find_machine(desc->machines); + mach = snd_soc_acpi_find_machine(desc->machines); if (mach == NULL) { dev_err(dev, "No matching ASoC machine driver found\n"); return -ENODEV; @@ -179,14 +180,9 @@ static int sst_acpi_remove(struct platform_device *pdev) return 0; } -static struct sst_acpi_mach haswell_machines[] = { - { "INT33CA", "haswell-audio", "intel/IntcSST1.bin", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_haswell_desc = { .drv_name = "haswell-pcm-audio", - .machines = haswell_machines, + .machines = snd_soc_acpi_intel_haswell_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = -1, @@ -197,15 +193,9 @@ static struct sst_acpi_desc sst_acpi_haswell_desc = { .dma_size = SST_LPT_DSP_DMA_SIZE, }; -static struct sst_acpi_mach broadwell_machines[] = { - { "INT343A", "broadwell-audio", "intel/IntcSST2.bin", NULL, NULL, NULL }, - { "RT5677CE", "bdw-rt5677", "intel/IntcSST2.bin", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_broadwell_desc = { .drv_name = "haswell-pcm-audio", - .machines = broadwell_machines, + .machines = snd_soc_acpi_intel_broadwell_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = -1, @@ -217,15 +207,9 @@ static struct sst_acpi_desc sst_acpi_broadwell_desc = { }; #if !IS_ENABLED(CONFIG_SND_SST_IPC_ACPI) -static struct sst_acpi_mach baytrail_machines[] = { - { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL }, - { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_baytrail_desc = { .drv_name = "baytrail-pcm-audio", - .machines = baytrail_machines, + .machines = snd_soc_acpi_intel_baytrail_legacy_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = 2, diff --git a/sound/soc/intel/common/sst-acpi.h b/sound/soc/intel/common/sst-acpi.h deleted file mode 100644 index afe9b87b8bd5..000000000000 --- a/sound/soc/intel/common/sst-acpi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2013-15, Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/stddef.h> -#include <linux/acpi.h> - -struct sst_acpi_package_context { - char *name; /* package name */ - int length; /* number of elements */ - struct acpi_buffer *format; - struct acpi_buffer *state; - bool data_valid; -}; - -#if IS_ENABLED(CONFIG_ACPI) -/* translation fron HID to I2C name, needed for DAI codec_name */ -const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]); -bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx); -#else -static inline const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]) -{ - return NULL; -} -static inline bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx) -{ - return false; -} -#endif - -/* acpi match */ -struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines); - -/* acpi check hid */ -bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN]); - -/* Descriptor for SST ASoC machine driver */ -struct sst_acpi_mach { - /* ACPI ID for the matching machine driver. Audio codec for instance */ - const u8 id[ACPI_ID_LEN]; - /* machine driver name */ - const char *drv_name; - /* firmware file name */ - const char *fw_filename; - - /* board name */ - const char *board; - struct sst_acpi_mach * (*machine_quirk)(void *arg); - const void *quirk_data; - void *pdata; -}; - -#define SST_ACPI_MAX_CODECS 3 - -/** - * struct sst_codecs: Structure to hold secondary codec information apart from - * the matched one, this data will be passed to the quirk function to match - * with the ACPI detected devices - * - * @num_codecs: number of secondary codecs used in the platform - * @codecs: holds the codec IDs - * - */ -struct sst_codecs { - int num_codecs; - u8 codecs[SST_ACPI_MAX_CODECS][ACPI_ID_LEN]; -}; - -/* check all codecs */ -struct sst_acpi_mach *sst_acpi_codec_list(void *arg); diff --git a/sound/soc/intel/common/sst-firmware.c b/sound/soc/intel/common/sst-firmware.c index a086c35f91bb..657afc02f1c4 100644 --- a/sound/soc/intel/common/sst-firmware.c +++ b/sound/soc/intel/common/sst-firmware.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/firmware.h> #include <linux/export.h> +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -274,7 +275,6 @@ int sst_dma_new(struct sst_dsp *sst) struct sst_pdata *sst_pdata = sst->pdata; struct sst_dma *dma; struct resource mem; - const char *dma_dev_name; int ret = 0; if (sst->pdata->resindex_dma_base == -1) @@ -285,7 +285,6 @@ int sst_dma_new(struct sst_dsp *sst) * is attached to the ADSP IP. */ switch (sst->pdata->dma_engine) { case SST_DMA_TYPE_DW: - dma_dev_name = "dw_dmac"; break; default: dev_err(sst->dev, "error: invalid DMA engine %d\n", diff --git a/sound/soc/intel/common/sst-match-acpi.c b/sound/soc/intel/common/sst-match-acpi.c deleted file mode 100644 index 56d26f36a3cb..000000000000 --- a/sound/soc/intel/common/sst-match-acpi.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * sst_match_apci.c - SST (LPE) match for ACPI enumeration. - * - * Copyright (c) 2013-15, Intel Corporation. - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include "sst-acpi.h" - -static acpi_status sst_acpi_find_name(acpi_handle handle, u32 level, - void *context, void **ret) -{ - struct acpi_device *adev; - const char *name = NULL; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (adev->status.present && adev->status.functional) { - name = acpi_dev_name(adev); - *(const char **)ret = name; - return AE_CTRL_TERMINATE; - } - - return AE_OK; -} - -const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]) -{ - const char *name = NULL; - acpi_status status; - - status = acpi_get_devices(hid, sst_acpi_find_name, NULL, - (void **)&name); - - if (ACPI_FAILURE(status) || name[0] == '\0') - return NULL; - - return name; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_name_from_hid); - -static acpi_status sst_acpi_mach_match(acpi_handle handle, u32 level, - void *context, void **ret) -{ - unsigned long long sta; - acpi_status status; - - *(bool *)context = true; - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) - *(bool *)context = false; - - return AE_OK; -} - -bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN]) -{ - acpi_status status; - bool found = false; - - status = acpi_get_devices(hid, sst_acpi_mach_match, &found, NULL); - - if (ACPI_FAILURE(status)) - return false; - - return found; -} -EXPORT_SYMBOL_GPL(sst_acpi_check_hid); - -struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines) -{ - struct sst_acpi_mach *mach; - - for (mach = machines; mach->id[0]; mach++) { - if (sst_acpi_check_hid(mach->id) == true) { - if (mach->machine_quirk == NULL) - return mach; - - if (mach->machine_quirk(mach) != NULL) - return mach; - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_machine); - -static acpi_status sst_acpi_find_package(acpi_handle handle, u32 level, - void *context, void **ret) -{ - struct acpi_device *adev; - acpi_status status = AE_OK; - struct sst_acpi_package_context *pkg_ctx = context; - - pkg_ctx->data_valid = false; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (adev->status.present && adev->status.functional) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *myobj = NULL; - - status = acpi_evaluate_object_typed(handle, pkg_ctx->name, - NULL, &buffer, - ACPI_TYPE_PACKAGE); - if (ACPI_FAILURE(status)) - return AE_OK; - - myobj = buffer.pointer; - if (!myobj || myobj->package.count != pkg_ctx->length) { - kfree(buffer.pointer); - return AE_OK; - } - - status = acpi_extract_package(myobj, - pkg_ctx->format, pkg_ctx->state); - if (ACPI_FAILURE(status)) { - kfree(buffer.pointer); - return AE_OK; - } - - kfree(buffer.pointer); - pkg_ctx->data_valid = true; - return AE_CTRL_TERMINATE; - } - - return AE_OK; -} - -bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx) -{ - acpi_status status; - - status = acpi_get_devices(hid, sst_acpi_find_package, ctx, NULL); - - if (ACPI_FAILURE(status) || !ctx->data_valid) - return false; - - return true; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_package_from_hid); - -struct sst_acpi_mach *sst_acpi_codec_list(void *arg) -{ - struct sst_acpi_mach *mach = arg; - struct sst_codecs *codec_list = (struct sst_codecs *) mach->quirk_data; - int i; - - if (mach->quirk_data == NULL) - return mach; - - for (i = 0; i < codec_list->num_codecs; i++) { - if (sst_acpi_check_hid(codec_list->codecs[i]) != true) - return NULL; - } - - return mach; -} -EXPORT_SYMBOL_GPL(sst_acpi_codec_list); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/skylake/Makefile b/sound/soc/intel/skylake/Makefile index 3380deb81015..d1ccbecd141f 100644 --- a/sound/soc/intel/skylake/Makefile +++ b/sound/soc/intel/skylake/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 snd-soc-skl-objs := skl.o skl-pcm.o skl-nhlt.o skl-messages.o \ skl-topology.o diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 89f70133c8e4..61b5bfa79d13 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -613,8 +613,10 @@ skip_buf_size_calc: } #define DMA_CONTROL_ID 5 +#define DMA_I2S_BLOB_SIZE 21 -int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig) +int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, + u32 caps_size, u32 node_id) { struct skl_dma_control *dma_ctrl; struct skl_ipc_large_config_msg msg = {0}; @@ -624,24 +626,27 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig) /* * if blob size zero, then return */ - if (mconfig->formats_config.caps_size == 0) + if (caps_size == 0) return 0; msg.large_param_id = DMA_CONTROL_ID; - msg.param_data_size = sizeof(struct skl_dma_control) + - mconfig->formats_config.caps_size; + msg.param_data_size = sizeof(struct skl_dma_control) + caps_size; dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL); if (dma_ctrl == NULL) return -ENOMEM; - dma_ctrl->node_id = skl_get_node_id(ctx, mconfig); + dma_ctrl->node_id = node_id; - /* size in dwords */ - dma_ctrl->config_length = mconfig->formats_config.caps_size / 4; + /* + * NHLT blob may contain additional configs along with i2s blob. + * firmware expects only the i2s blob size as the config_length. + * So fix to i2s blob size. + * size in dwords. + */ + dma_ctrl->config_length = DMA_I2S_BLOB_SIZE; - memcpy(dma_ctrl->config_data, mconfig->formats_config.caps, - mconfig->formats_config.caps_size); + memcpy(dma_ctrl->config_data, caps, caps_size); err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl); @@ -702,18 +707,11 @@ static void skl_set_updown_mixer_format(struct skl_sst *ctx, struct skl_module *module = mconfig->module; struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; struct skl_module_fmt *fmt = &iface->outputs[0].fmt; - int i = 0; skl_set_base_module_format(ctx, mconfig, (struct skl_base_cfg *)mixer_mconfig); mixer_mconfig->out_ch_cfg = fmt->ch_cfg; - - /* Select F/W default coefficient */ - mixer_mconfig->coeff_sel = 0x0; - - /* User coeff, don't care since we are selecting F/W defaults */ - for (i = 0; i < UP_DOWN_MIXER_MAX_COEFF; i++) - mixer_mconfig->coeff[i] = 0xDEADBEEF; + mixer_mconfig->ch_map = fmt->ch_map; } /* diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index e7d766d56c8e..d14c50a60289 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -20,6 +20,8 @@ #include <linux/pci.h> #include "skl.h" +#define NHLT_ACPI_HEADER_SIG "NHLT" + /* Unique identification for getting NHLT blobs */ static guid_t osc_guid = GUID_INIT(0xA69F886E, 0x6CEB, 0x4594, @@ -45,6 +47,13 @@ struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) memremap(nhlt_ptr->min_addr, nhlt_ptr->length, MEMREMAP_WB); ACPI_FREE(obj); + if (nhlt_table && (strncmp(nhlt_table->header.signature, + NHLT_ACPI_HEADER_SIG, + strlen(NHLT_ACPI_HEADER_SIG)) != 0)) { + memunmap(nhlt_table); + dev_err(dev, "NHLT ACPI header signature incorrect\n"); + return NULL; + } return nhlt_table; } diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 2b1e513b1680..1dd97479e0c0 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -355,7 +355,8 @@ static void skl_pcm_close(struct snd_pcm_substream *substream, } mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream); - skl_tplg_d0i3_put(skl, mconfig->d0i3_caps); + if (mconfig) + skl_tplg_d0i3_put(skl, mconfig->d0i3_caps); kfree(dma_params); } @@ -652,7 +653,7 @@ static const struct snd_soc_dai_ops skl_link_dai_ops = { .trigger = skl_link_pcm_trigger, }; -static struct snd_soc_dai_driver skl_platform_dai[] = { +static struct snd_soc_dai_driver skl_fe_dai[] = { { .name = "System Pin", .ops = &skl_pcm_dai_ops, @@ -796,8 +797,10 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .sig_bits = 32, }, }, +}; /* BE CPU Dais */ +static struct snd_soc_dai_driver skl_platform_dai[] = { { .name = "SSP0 Pin", .ops = &skl_be_ssp_dai_ops, @@ -975,6 +978,14 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { }, }; +int skl_dai_load(struct snd_soc_component *cmp, + struct snd_soc_dai_driver *pcm_dai) +{ + pcm_dai->ops = &skl_pcm_dai_ops; + + return 0; +} + static int skl_platform_open(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; @@ -1362,6 +1373,8 @@ int skl_platform_register(struct device *dev) int ret; struct hdac_ext_bus *ebus = dev_get_drvdata(dev); struct skl *skl = ebus_to_skl(ebus); + struct snd_soc_dai_driver *dais; + int num_dais = ARRAY_SIZE(skl_platform_dai); INIT_LIST_HEAD(&skl->ppl_list); INIT_LIST_HEAD(&skl->bind_list); @@ -1371,14 +1384,38 @@ int skl_platform_register(struct device *dev) dev_err(dev, "soc platform registration failed %d\n", ret); return ret; } + + skl->dais = kmemdup(skl_platform_dai, sizeof(skl_platform_dai), + GFP_KERNEL); + if (!skl->dais) { + ret = -ENOMEM; + goto err; + } + + if (!skl->use_tplg_pcm) { + dais = krealloc(skl->dais, sizeof(skl_fe_dai) + + sizeof(skl_platform_dai), GFP_KERNEL); + if (!dais) { + ret = -ENOMEM; + goto err; + } + + skl->dais = dais; + memcpy(&skl->dais[ARRAY_SIZE(skl_platform_dai)], skl_fe_dai, + sizeof(skl_fe_dai)); + num_dais += ARRAY_SIZE(skl_fe_dai); + } + ret = snd_soc_register_component(dev, &skl_component, - skl_platform_dai, - ARRAY_SIZE(skl_platform_dai)); + skl->dais, num_dais); if (ret) { dev_err(dev, "soc component registration failed %d\n", ret); - snd_soc_unregister_platform(dev); + goto err; } + return 0; +err: + snd_soc_unregister_platform(dev); return ret; } @@ -1398,5 +1435,7 @@ int skl_platform_unregister(struct device *dev) snd_soc_unregister_component(dev); snd_soc_unregister_platform(dev); + kfree(skl->dais); + return 0; } diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index 369ef7ce981c..8ff89280d9fd 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -251,6 +251,7 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, struct uuid_module *module; struct firmware stripped_fw; unsigned int safe_file; + int ret = 0; /* Get the FW pointer to derive ADSP header */ stripped_fw.data = fw->data; @@ -299,8 +300,10 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, for (i = 0; i < num_entry; i++, mod_entry++) { module = kzalloc(sizeof(*module), GFP_KERNEL); - if (!module) - return -ENOMEM; + if (!module) { + ret = -ENOMEM; + goto free_uuid_list; + } uuid_bin = (uuid_le *)mod_entry->uuid.id; memcpy(&module->uuid, uuid_bin, sizeof(module->uuid)); @@ -311,8 +314,8 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, size = sizeof(int) * mod_entry->instance_max_count; module->instance_id = devm_kzalloc(ctx->dev, size, GFP_KERNEL); if (!module->instance_id) { - kfree(module); - return -ENOMEM; + ret = -ENOMEM; + goto free_uuid_list; } list_add_tail(&module->list, &skl->uuid_list); @@ -323,6 +326,10 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, } return 0; + +free_uuid_list: + skl_freeup_uuid_list(skl); + return ret; } void skl_freeup_uuid_list(struct skl_sst *ctx) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 22f768ca3c73..a072bcf209d2 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -2036,21 +2036,45 @@ static int skl_tplg_add_pipe(struct device *dev, return 0; } -static int skl_tplg_fill_pin(struct device *dev, u32 tkn, +static int skl_tplg_get_uuid(struct device *dev, u8 *guid, + struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) +{ + if (uuid_tkn->token == SKL_TKN_UUID) { + memcpy(guid, &uuid_tkn->uuid, 16); + return 0; + } + + dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token); + + return -EINVAL; +} + +static int skl_tplg_fill_pin(struct device *dev, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, struct skl_module_pin *m_pin, - int pin_index, u32 value) + int pin_index) { - switch (tkn) { + int ret; + + switch (tkn_elem->token) { case SKL_TKN_U32_PIN_MOD_ID: - m_pin[pin_index].id.module_id = value; + m_pin[pin_index].id.module_id = tkn_elem->value; break; case SKL_TKN_U32_PIN_INST_ID: - m_pin[pin_index].id.instance_id = value; + m_pin[pin_index].id.instance_id = tkn_elem->value; + break; + + case SKL_TKN_UUID: + ret = skl_tplg_get_uuid(dev, m_pin[pin_index].id.mod_uuid.b, + (struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem); + if (ret < 0) + return ret; + break; default: - dev_err(dev, "%d Not a pin token\n", value); + dev_err(dev, "%d Not a pin token\n", tkn_elem->token); return -EINVAL; } @@ -2083,9 +2107,7 @@ static int skl_tplg_fill_pins_info(struct device *dev, return -EINVAL; } - ret = skl_tplg_fill_pin(dev, tkn_elem->token, - m_pin, pin_count, tkn_elem->value); - + ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count); if (ret < 0) return ret; @@ -2170,19 +2192,6 @@ static int skl_tplg_widget_fill_fmt(struct device *dev, return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val); } -static int skl_tplg_get_uuid(struct device *dev, struct skl_module_cfg *mconfig, - struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) -{ - if (uuid_tkn->token == SKL_TKN_UUID) - memcpy(&mconfig->guid, &uuid_tkn->uuid, 16); - else { - dev_err(dev, "Not an UUID token tkn %d\n", uuid_tkn->token); - return -EINVAL; - } - - return 0; -} - static void skl_tplg_fill_pin_dynamic_val( struct skl_module_pin *mpin, u32 pin_count, u32 value) { @@ -2382,7 +2391,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_MAX_MCPS: case SKL_TKN_U32_OBS: case SKL_TKN_U32_IBS: - ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, dir, pin_index); + ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_index, dir); if (ret < 0) return ret; @@ -2488,6 +2497,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_PIN_MOD_ID: case SKL_TKN_U32_PIN_INST_ID: + case SKL_TKN_UUID: ret = skl_tplg_fill_pins_info(dev, mconfig, tkn_elem, dir, pin_index); @@ -2550,6 +2560,7 @@ static int skl_tplg_get_tokens(struct device *dev, struct snd_soc_tplg_vendor_value_elem *tkn_elem; int tkn_count = 0, ret; int off = 0, tuple_size = 0; + bool is_module_guid = true; if (block_size <= 0) return -EINVAL; @@ -2565,7 +2576,15 @@ static int skl_tplg_get_tokens(struct device *dev, continue; case SND_SOC_TPLG_TUPLE_TYPE_UUID: - ret = skl_tplg_get_uuid(dev, mconfig, array->uuid); + if (is_module_guid) { + ret = skl_tplg_get_uuid(dev, mconfig->guid, + array->uuid); + is_module_guid = false; + } else { + ret = skl_tplg_get_token(dev, array->value, skl, + mconfig); + } + if (ret < 0) return ret; @@ -3331,6 +3350,7 @@ static struct snd_soc_tplg_ops skl_tplg_ops = { .io_ops = skl_tplg_kcontrol_ops, .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), .manifest = skl_manifest_load, + .dai_load = skl_dai_load, }; /* @@ -3404,7 +3424,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus) ret = request_firmware(&fw, skl->tplg_name, bus->dev); if (ret < 0) { - dev_err(bus->dev, "tplg fw %s load failed with %d\n", + dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin", skl->tplg_name, ret); ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); if (ret < 0) { diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 2717db92036b..b6496513fe55 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -34,7 +34,7 @@ #define MAX_FIXED_DMIC_PARAMS_SIZE 727 /* Maximum number of coefficients up down mixer module */ -#define UP_DOWN_MIXER_MAX_COEFF 6 +#define UP_DOWN_MIXER_MAX_COEFF 8 #define MODULE_MAX_IN_PINS 8 #define MODULE_MAX_OUT_PINS 8 @@ -161,6 +161,7 @@ struct skl_up_down_mixer_cfg { u32 coeff_sel; /* Pass the user coeff in this array */ s32 coeff[UP_DOWN_MIXER_MAX_COEFF]; + u32 ch_map; } __packed; struct skl_algo_cfg { @@ -455,8 +456,8 @@ static inline struct skl *get_skl_ctx(struct device *dev) int skl_tplg_be_update_params(struct snd_soc_dai *dai, struct skl_pipe_params *params); -int skl_dsp_set_dma_control(struct skl_sst *ctx, - struct skl_module_cfg *mconfig); +int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, + u32 caps_size, u32 node_id); void skl_tplg_set_be_dmic_config(struct snd_soc_dai *dai, struct skl_pipe_params *params, int stream); int skl_tplg_init(struct snd_soc_platform *platform, @@ -501,4 +502,7 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params); int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params); + +int skl_dai_load(struct snd_soc_component *cmp, + struct snd_soc_dai_driver *pcm_dai); #endif diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index f94b484abb99..31d8634e8aa1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -28,7 +28,7 @@ #include <linux/firmware.h> #include <linux/delay.h> #include <sound/pcm.h> -#include "../common/sst-acpi.h" +#include <sound/soc-acpi.h> #include <sound/hda_register.h> #include <sound/hdaudio.h> #include <sound/hda_i915.h> @@ -439,10 +439,10 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data) { struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); struct platform_device *pdev; - struct sst_acpi_mach *mach = driver_data; + struct snd_soc_acpi_mach *mach = driver_data; int ret; - mach = sst_acpi_find_machine(mach); + mach = snd_soc_acpi_find_machine(mach); if (mach == NULL) { dev_err(bus->dev, "No matching machine driver found\n"); return -ENODEV; @@ -462,8 +462,11 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data) return -EIO; } - if (mach->pdata) + if (mach->pdata) { + skl->use_tplg_pcm = + ((struct skl_machine_pdata *)mach->pdata)->use_tplg_pcm; dev_set_drvdata(&pdev->dev, mach->pdata); + } skl->i2s_dev = pdev; @@ -875,33 +878,36 @@ static void skl_remove(struct pci_dev *pci) dev_set_drvdata(&pci->dev, NULL); } -static struct sst_codecs skl_codecs = { +static struct snd_soc_acpi_codecs skl_codecs = { .num_codecs = 1, .codecs = {"10508825"} }; -static struct sst_codecs kbl_codecs = { +static struct snd_soc_acpi_codecs kbl_codecs = { .num_codecs = 1, .codecs = {"10508825"} }; -static struct sst_codecs bxt_codecs = { +static struct snd_soc_acpi_codecs bxt_codecs = { .num_codecs = 1, .codecs = {"MX98357A"} }; -static struct sst_codecs kbl_poppy_codecs = { +static struct snd_soc_acpi_codecs kbl_poppy_codecs = { .num_codecs = 1, .codecs = {"10EC5663"} }; -static struct sst_codecs kbl_5663_5514_codecs = { +static struct snd_soc_acpi_codecs kbl_5663_5514_codecs = { .num_codecs = 2, .codecs = {"10EC5663", "10EC5514"} }; +static struct skl_machine_pdata cnl_pdata = { + .use_tplg_pcm = true, +}; -static struct sst_acpi_mach sst_skl_devdata[] = { +static struct snd_soc_acpi_mach sst_skl_devdata[] = { { .id = "INT343A", .drv_name = "skl_alc286s_i2s", @@ -911,7 +917,7 @@ static struct sst_acpi_mach sst_skl_devdata[] = { .id = "INT343B", .drv_name = "skl_n88l25_s4567", .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &skl_codecs, .pdata = &skl_dmic_data }, @@ -919,14 +925,14 @@ static struct sst_acpi_mach sst_skl_devdata[] = { .id = "MX98357A", .drv_name = "skl_n88l25_m98357a", .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &skl_codecs, .pdata = &skl_dmic_data }, {} }; -static struct sst_acpi_mach sst_bxtp_devdata[] = { +static struct snd_soc_acpi_mach sst_bxtp_devdata[] = { { .id = "INT343A", .drv_name = "bxt_alc298s_i2s", @@ -936,13 +942,13 @@ static struct sst_acpi_mach sst_bxtp_devdata[] = { .id = "DLGS7219", .drv_name = "bxt_da7219_max98357a_i2s", .fw_filename = "intel/dsp_fw_bxtn.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &bxt_codecs, }, {} }; -static struct sst_acpi_mach sst_kbl_devdata[] = { +static struct snd_soc_acpi_mach sst_kbl_devdata[] = { { .id = "INT343A", .drv_name = "kbl_alc286s_i2s", @@ -952,7 +958,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "INT343B", .drv_name = "kbl_n88l25_s4567", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_codecs, .pdata = &skl_dmic_data }, @@ -960,7 +966,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98357A", .drv_name = "kbl_n88l25_m98357a", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_codecs, .pdata = &skl_dmic_data }, @@ -968,7 +974,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98927", .drv_name = "kbl_r5514_5663_max", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_5663_5514_codecs, .pdata = &skl_dmic_data }, @@ -976,7 +982,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98927", .drv_name = "kbl_rt5663_m98927", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_poppy_codecs, .pdata = &skl_dmic_data }, @@ -989,7 +995,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { {} }; -static struct sst_acpi_mach sst_glk_devdata[] = { +static struct snd_soc_acpi_mach sst_glk_devdata[] = { { .id = "INT343A", .drv_name = "glk_alc298s_i2s", @@ -998,12 +1004,14 @@ static struct sst_acpi_mach sst_glk_devdata[] = { {} }; -static const struct sst_acpi_mach sst_cnl_devdata[] = { +static const struct snd_soc_acpi_mach sst_cnl_devdata[] = { { .id = "INT34C2", .drv_name = "cnl_rt274", .fw_filename = "intel/dsp_fw_cnl.bin", + .pdata = &cnl_pdata, }, + {} }; /* PCI IDs */ diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 8d9d6899f761..e00cde8200dd 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -53,6 +53,7 @@ struct skl { struct platform_device *dmic_dev; struct platform_device *i2s_dev; struct snd_soc_platform *platform; + struct snd_soc_dai_driver *dais; struct nhlt_acpi_table *nhlt; /* nhlt ptr */ struct skl_sst *skl_sst; /* sst skl ctx */ @@ -73,6 +74,7 @@ struct skl { struct skl_debug *debugfs; u8 nr_modules; struct skl_module **modules; + bool use_tplg_pcm; }; #define skl_to_ebus(s) (&(s)->ebus) @@ -85,9 +87,9 @@ struct skl_dma_params { u8 stream_tag; }; -/* to pass dmic data */ struct skl_machine_pdata { u32 dmic_num; + bool use_tplg_pcm; /* use dais and dai links from topology */ }; struct skl_dsp_ops { |