diff options
Diffstat (limited to 'include/linux/mfd/asic3.h')
| -rw-r--r-- | include/linux/mfd/asic3.h | 185 |
1 files changed, 95 insertions, 90 deletions
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h index 4ab2162db13b..322cd6deb9f0 100644 --- a/include/linux/mfd/asic3.h +++ b/include/linux/mfd/asic3.h @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * Copyright 2001 Compaq Computer Corporation. - * Copyright 2007 OpendHand. + * Copyright 2007-2008 OpenedHand Ltd. */ #ifndef __ASIC3_H__ @@ -16,43 +16,22 @@ #include <linux/types.h> -struct asic3 { - void __iomem *mapping; - unsigned int bus_shift; - unsigned int irq_nr; - unsigned int irq_base; - spinlock_t lock; - u16 irq_bothedge[4]; - struct device *dev; -}; - struct asic3_platform_data { - struct { - u32 dir; - u32 init; - u32 sleep_mask; - u32 sleep_out; - u32 batt_fault_out; - u32 sleep_conf; - u32 alt_function; - } gpio_a, gpio_b, gpio_c, gpio_d; - - unsigned int bus_shift; + u16 *gpio_config; + unsigned int gpio_config_num; unsigned int irq_base; - struct platform_device **children; - unsigned int n_children; + unsigned int gpio_base; }; -int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio); -void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); - #define ASIC3_NUM_GPIO_BANKS 4 #define ASIC3_GPIOS_PER_BANK 16 #define ASIC3_NUM_GPIOS 64 #define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6 +#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio)) + #define ASIC3_GPIO_BANK_A 0 #define ASIC3_GPIO_BANK_B 1 #define ASIC3_GPIO_BANK_C 2 @@ -64,32 +43,89 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); /* All offsets below are specified with this address bus shift */ #define ASIC3_DEFAULT_ADDR_SHIFT 2 -#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg) +#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg) #define ASIC3_GPIO_OFFSET(base, reg) \ - (ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg) - -#define ASIC3_GPIO_A_Base 0x0000 -#define ASIC3_GPIO_B_Base 0x0100 -#define ASIC3_GPIO_C_Base 0x0200 -#define ASIC3_GPIO_D_Base 0x0300 - -#define ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask */ -#define ASIC3_GPIO_Direction 0x04 /* R/W 0:input */ -#define ASIC3_GPIO_Out 0x08 /* R/W 0:output low */ -#define ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level */ -#define ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling */ -#define ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low level detect */ -#define ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask in sleep mode */ -#define ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low in sleep mode */ -#define ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low in batt_fault */ -#define ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */ -#define ASIC3_GPIO_AltFunction 0x28 /* R/W 1:LED register control */ -#define ASIC3_GPIO_SleepConf 0x2c /* + (ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg) + +#define ASIC3_GPIO_A_BASE 0x0000 +#define ASIC3_GPIO_B_BASE 0x0100 +#define ASIC3_GPIO_C_BASE 0x0200 +#define ASIC3_GPIO_D_BASE 0x0300 + +#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4) +#define ASIC3_GPIO_TO_BIT(gpio) ((gpio) - \ + (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4))) +#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio)) +#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100)) +#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100)) + +#define ASIC3_GPIO_MASK 0x00 /* R/W 0:don't mask */ +#define ASIC3_GPIO_DIRECTION 0x04 /* R/W 0:input */ +#define ASIC3_GPIO_OUT 0x08 /* R/W 0:output low */ +#define ASIC3_GPIO_TRIGGER_TYPE 0x0c /* R/W 0:level */ +#define ASIC3_GPIO_EDGE_TRIGGER 0x10 /* R/W 0:falling */ +#define ASIC3_GPIO_LEVEL_TRIGGER 0x14 /* R/W 0:low level detect */ +#define ASIC3_GPIO_SLEEP_MASK 0x18 /* R/W 0:don't mask in sleep mode */ +#define ASIC3_GPIO_SLEEP_OUT 0x1c /* R/W level 0:low in sleep mode */ +#define ASIC3_GPIO_BAT_FAULT_OUT 0x20 /* R/W level 0:low in batt_fault */ +#define ASIC3_GPIO_INT_STATUS 0x24 /* R/W 0:none, 1:detect */ +#define ASIC3_GPIO_ALT_FUNCTION 0x28 /* R/W 1:LED register control */ +#define ASIC3_GPIO_SLEEP_CONF 0x2c /* * R/W bit 1: autosleep * 0: disable gposlpout in normal mode, * enable gposlpout in sleep mode. */ -#define ASIC3_GPIO_Status 0x30 /* R Pin status */ +#define ASIC3_GPIO_STATUS 0x30 /* R Pin status */ + +/* + * ASIC3 GPIO config + * + * Bits 0..6 gpio number + * Bits 7..13 Alternate function + * Bit 14 Direction + * Bit 15 Initial value + * + */ +#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f) +#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7) +#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14) +#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15) +#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \ + | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \ + | (((init) & 0x1) << 15)) +#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init)) +#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \ + ASIC3_CONFIG_GPIO((gpio), 0, 1, (init)) + +/* + * Alternate functions + */ +#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0) +#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0) +#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0) +#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 1, 0) +#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 1, 0) +#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 1, 0) +#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0) +#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0) +#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0) +#define ASIC3_GPIOC5_SPI_CLK ASIC3_CONFIG_GPIO(37, 1, 1, 0) +#define ASIC3_GPIOC5_nCIOW ASIC3_CONFIG_GPIO(37, 1, 1, 0) +#define ASIC3_GPIOC6_nCIOR ASIC3_CONFIG_GPIO(38, 1, 1, 0) +#define ASIC3_GPIOC7_nPCE_1 ASIC3_CONFIG_GPIO(39, 1, 0, 0) +#define ASIC3_GPIOC8_nPCE_2 ASIC3_CONFIG_GPIO(40, 1, 0, 0) +#define ASIC3_GPIOC9_nPOE ASIC3_CONFIG_GPIO(41, 1, 0, 0) +#define ASIC3_GPIOC10_nPWE ASIC3_CONFIG_GPIO(42, 1, 0, 0) +#define ASIC3_GPIOC11_PSKTSEL ASIC3_CONFIG_GPIO(43, 1, 0, 0) +#define ASIC3_GPIOC12_nPREG ASIC3_CONFIG_GPIO(44, 1, 0, 0) +#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0) +#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0) +#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0) +#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0) +#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0) +#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0) + #define ASIC3_SPI_Base 0x0400 #define ASIC3_SPI_Control 0x0000 @@ -128,7 +164,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */ #define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ -#define ASIC3_CLOCK_Base 0x0A00 +#define ASIC3_CLOCK_BASE 0x0A00 #define ASIC3_CLOCK_CDEX 0x00 #define ASIC3_CLOCK_SEL 0x04 @@ -159,12 +195,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define CLOCK_SEL_CX (1 << 2) -#define ASIC3_INTR_Base 0x0B00 +#define ASIC3_INTR_BASE 0x0B00 -#define ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */ -#define ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */ -#define ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */ -#define ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */ +#define ASIC3_INTR_INT_MASK 0x00 /* Interrupt mask control */ +#define ASIC3_INTR_P_INT_STAT 0x04 /* Peripheral interrupt status */ +#define ASIC3_INTR_INT_CPS 0x08 /* Interrupt timer clock pre-scale */ +#define ASIC3_INTR_INT_TBS 0x0c /* Interrupt timer set */ #define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */ #define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ @@ -227,44 +263,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ /********************************************* - * The Onewire interface registers - * - * OWM_CMD - * OWM_DAT - * OWM_INTR - * OWM_INTEN - * OWM_CLKDIV + * The Onewire interface (DS1WM) is handled + * by the ds1wm driver. * *********************************************/ -#define ASIC3_OWM_Base 0xC00 - -#define ASIC3_OWM_CMD 0x00 -#define ASIC3_OWM_DAT 0x04 -#define ASIC3_OWM_INTR 0x08 -#define ASIC3_OWM_INTEN 0x0C -#define ASIC3_OWM_CLKDIV 0x10 - -#define ASIC3_OWM_CMD_ONEWR (1 << 0) -#define ASIC3_OWM_CMD_SRA (1 << 1) -#define ASIC3_OWM_CMD_DQO (1 << 2) -#define ASIC3_OWM_CMD_DQI (1 << 3) - -#define ASIC3_OWM_INTR_PD (1 << 0) -#define ASIC3_OWM_INTR_PDR (1 << 1) -#define ASIC3_OWM_INTR_TBE (1 << 2) -#define ASIC3_OWM_INTR_TEMP (1 << 3) -#define ASIC3_OWM_INTR_RBF (1 << 4) - -#define ASIC3_OWM_INTEN_EPD (1 << 0) -#define ASIC3_OWM_INTEN_IAS (1 << 1) -#define ASIC3_OWM_INTEN_ETBE (1 << 2) -#define ASIC3_OWM_INTEN_ETMT (1 << 3) -#define ASIC3_OWM_INTEN_ERBF (1 << 4) - -#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit 0 */ -#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit 2 */ - +#define ASIC3_OWM_BASE 0xC00 /***************************************************************************** * The SD configuration registers are at a completely different location @@ -492,6 +496,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val); #define ASIC3_SDIO_CTRL_LEDCtrl 0x7C #define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 -#define ASIC3_MAP_SIZE 0x2000 +#define ASIC3_MAP_SIZE_32BIT 0x2000 +#define ASIC3_MAP_SIZE_16BIT 0x1000 #endif /* __ASIC3_H__ */ |