diff options
Diffstat (limited to 'include/linux/ipack.h')
| -rw-r--r-- | include/linux/ipack.h | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/include/linux/ipack.h b/include/linux/ipack.h new file mode 100644 index 000000000000..7a0a3085ab5b --- /dev/null +++ b/include/linux/ipack.h @@ -0,0 +1,213 @@ +/* + * Industry-pack bus. + * + * Copyright (C) 2011-2012 CERN (www.cern.ch) + * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/mod_devicetable.h> +#include <linux/device.h> +#include <linux/interrupt.h> + +#define IPACK_IDPROM_OFFSET_I 0x01 +#define IPACK_IDPROM_OFFSET_P 0x03 +#define IPACK_IDPROM_OFFSET_A 0x05 +#define IPACK_IDPROM_OFFSET_C 0x07 +#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09 +#define IPACK_IDPROM_OFFSET_MODEL 0x0B +#define IPACK_IDPROM_OFFSET_REVISION 0x0D +#define IPACK_IDPROM_OFFSET_RESERVED 0x0F +#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11 +#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13 +#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15 +#define IPACK_IDPROM_OFFSET_CRC 0x17 + +struct ipack_bus_ops; +struct ipack_driver; + +enum ipack_space { + IPACK_IO_SPACE = 0, + IPACK_ID_SPACE, + IPACK_INT_SPACE, + IPACK_MEM8_SPACE, + IPACK_MEM16_SPACE, + /* Dummy for counting the number of entries. Must remain the last + * entry */ + IPACK_SPACE_COUNT, +}; + +/** + */ +struct ipack_region { + phys_addr_t start; + size_t size; +}; + +/** + * struct ipack_device + * + * @slot: Slot where the device is plugged in the carrier board + * @bus: ipack_bus_device where the device is plugged to. + * @id_space: Virtual address to ID space. + * @io_space: Virtual address to IO space. + * @mem_space: Virtual address to MEM space. + * @dev: device in kernel representation. + * + * Warning: Direct access to mapped memory is possible but the endianness + * is not the same with PCI carrier or VME carrier. The endianness is managed + * by the carrier board throught bus->ops. + */ +struct ipack_device { + unsigned int slot; + struct ipack_bus_device *bus; + struct device dev; + void (*release) (struct ipack_device *dev); + struct ipack_region region[IPACK_SPACE_COUNT]; + u8 *id; + size_t id_avail; + u32 id_vendor; + u32 id_device; + u8 id_format; + unsigned int id_crc_correct:1; + unsigned int speed_8mhz:1; + unsigned int speed_32mhz:1; +}; + +/** + * struct ipack_driver_ops -- Callbacks to IPack device driver + * + * @probe: Probe function + * @remove: Prepare imminent removal of the device. Services provided by the + * device should be revoked. + */ + +struct ipack_driver_ops { + int (*probe) (struct ipack_device *dev); + void (*remove) (struct ipack_device *dev); +}; + +/** + * struct ipack_driver -- Specific data to each ipack device driver + * + * @driver: Device driver kernel representation + * @ops: Callbacks provided by the IPack device driver + */ +struct ipack_driver { + struct device_driver driver; + const struct ipack_device_id *id_table; + const struct ipack_driver_ops *ops; +}; + +/** + * struct ipack_bus_ops - available operations on a bridge module + * + * @map_space: map IP address space + * @unmap_space: unmap IP address space + * @request_irq: request IRQ + * @free_irq: free IRQ + * @get_clockrate: Returns the clockrate the carrier is currently + * communicating with the device at. + * @set_clockrate: Sets the clock-rate for carrier / module communication. + * Should return -EINVAL if the requested speed is not supported. + * @get_error: Returns the error state for the slot the device is attached + * to. + * @get_timeout: Returns 1 if the communication with the device has + * previously timed out. + * @reset_timeout: Resets the state returned by get_timeout. + */ +struct ipack_bus_ops { + int (*request_irq) (struct ipack_device *dev, + irqreturn_t (*handler)(void *), void *arg); + int (*free_irq) (struct ipack_device *dev); + int (*get_clockrate) (struct ipack_device *dev); + int (*set_clockrate) (struct ipack_device *dev, int mherz); + int (*get_error) (struct ipack_device *dev); + int (*get_timeout) (struct ipack_device *dev); + int (*reset_timeout) (struct ipack_device *dev); +}; + +/** + * struct ipack_bus_device + * + * @dev: pointer to carrier device + * @slots: number of slots available + * @bus_nr: ipack bus number + * @ops: bus operations for the mezzanine drivers + */ +struct ipack_bus_device { + struct device *parent; + int slots; + int bus_nr; + const struct ipack_bus_ops *ops; +}; + +/** + * ipack_bus_register -- register a new ipack bus + * + * @parent: pointer to the parent device, if any. + * @slots: number of slots available in the bus device. + * @ops: bus operations for the mezzanine drivers. + * + * The carrier board device should call this function to register itself as + * available bus device in ipack. + */ +struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots, + const struct ipack_bus_ops *ops); + +/** + * ipack_bus_unregister -- unregister an ipack bus + */ +int ipack_bus_unregister(struct ipack_bus_device *bus); + +/** + * ipack_driver_register -- Register a new ipack device driver + * + * Called by a ipack driver to register itself as a driver + * that can manage ipack devices. + */ +int ipack_driver_register(struct ipack_driver *edrv, struct module *owner, + const char *name); +void ipack_driver_unregister(struct ipack_driver *edrv); + +/** + * ipack_device_register -- register an IPack device with the kernel + * @dev: the new device to register. + * + * Register a new IPack device ("module" in IndustryPack jargon). The call + * is done by the carrier driver. The carrier should populate the fields + * bus and slot as well as the region array of @dev prior to calling this + * function. The rest of the fields will be allocated and populated + * during registration. + * + * Return zero on success or error code on failure. + */ +int ipack_device_register(struct ipack_device *dev); +void ipack_device_unregister(struct ipack_device *dev); + +/** + * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table + * @_table: device table name + * + * This macro is used to create a struct ipack_device_id array (a device table) + * in a generic manner. + */ +#define DEFINE_IPACK_DEVICE_TABLE(_table) \ + const struct ipack_device_id _table[] __devinitconst + +/** + * IPACK_DEVICE - macro used to describe a specific IndustryPack device + * @_format: the format version (currently either 1 or 2, 8 bit value) + * @vend: the 8 or 24 bit IndustryPack Vendor ID + * @dev: the 8 or 16 bit IndustryPack Device ID + * + * This macro is used to create a struct ipack_device_id that matches a specific + * device. + */ +#define IPACK_DEVICE(_format, vend, dev) \ + .format = (_format), \ + .vendor = (vend), \ + .device = (dev) |