diff options
Diffstat (limited to 'include/linux/bcma/bcma_driver_chipcommon.h')
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a0f684615ae5..1526d965ed06 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,6 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NFLASH 0x00000200 #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -178,6 +179,7 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -239,6 +241,64 @@ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 + +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f + +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -247,14 +307,37 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + struct bcma_drv_cc { struct bcma_device *core; u32 status; u32 capabilities; u32 capabilities_ext; + u8 setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ }; /* Register access */ @@ -275,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); @@ -293,4 +378,13 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, + u32 mask, u32 set); +extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ |