summaryrefslogtreecommitdiff
path: root/include/asm-v850/rte_me2_cb.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-v850/rte_me2_cb.h')
-rw-r--r--include/asm-v850/rte_me2_cb.h202
1 files changed, 0 insertions, 202 deletions
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
deleted file mode 100644
index 9922c85c85a8..000000000000
--- a/include/asm-v850/rte_me2_cb.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
- *
- * Copyright (C) 2001,02,03 NEC Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_ME2_CB_H__
-#define __V850_RTE_ME2_CB_H__
-
-#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */
-
-
-#define PLATFORM "rte-v850e/me2-cb"
-#define PLATFORM_LONG "Midas lab RTE-V850E/ME2-CB"
-
-#define CPU_CLOCK_FREQ 150000000 /* 150MHz */
-#define FIXED_BOGOMIPS 50
-
-/* 32MB of onbard SDRAM. */
-#define SDRAM_ADDR 0x00800000
-#define SDRAM_SIZE 0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces. */
-#define GCS0_ADDR 0x04000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE 0x00800000 /* 8MB */
-#define GCS1_ADDR 0x04800000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE 0x00800000 /* 8MB */
-#define GCS2_ADDR 0x07000000 /* GCS2 - I/O registers */
-#define GCS2_SIZE 0x00800000 /* 8MB */
-#define GCS5_ADDR 0x08000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE 0x02000000 /* 32MB */
-#define GCS6_ADDR 0x07800000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE 0x00800000 /* 8MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SDRAM_ADDR
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0. */
-
-#define INTV_BASE 0
-#define ROOT_FS_IMAGE_RW 0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at
- address 0. */
-
-#define INTV_BASE 0
-#define ROOT_FS_IMAGE_RW 1
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices. */
-
-/* Seven-segment LED display (four digits). */
-#define LED_ADDR(n) (0x0FE02000 + (n))
-#define LED(n) (*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS 4
-
-
-/* On-board PIC. */
-
-#define CB_PIC_BASE_ADDR 0x0FE04000
-
-#define CB_PIC_INT0M_ADDR (CB_PIC_BASE_ADDR + 0x00)
-#define CB_PIC_INT0M (*(volatile u16 *)CB_PIC_INT0M_ADDR)
-#define CB_PIC_INT1M_ADDR (CB_PIC_BASE_ADDR + 0x10)
-#define CB_PIC_INT1M (*(volatile u16 *)CB_PIC_INT1M_ADDR)
-#define CB_PIC_INTR_ADDR (CB_PIC_BASE_ADDR + 0x20)
-#define CB_PIC_INTR (*(volatile u16 *)CB_PIC_INTR_ADDR)
-#define CB_PIC_INTEN_ADDR (CB_PIC_BASE_ADDR + 0x30)
-#define CB_PIC_INTEN (*(volatile u16 *)CB_PIC_INTEN_ADDR)
-
-#define CB_PIC_INT0EN 0x0001
-#define CB_PIC_INT1EN 0x0002
-#define CB_PIC_INT0SEL 0x0080
-
-/* The PIC interrupts themselves. */
-#define CB_PIC_BASE_IRQ NUM_CPU_IRQS
-#define IRQ_CB_PIC_NUM 10
-
-/* Some specific CB_PIC interrupts. */
-#define IRQ_CB_EXTTM0 (CB_PIC_BASE_IRQ + 0)
-#define IRQ_CB_EXTSIO (CB_PIC_BASE_IRQ + 1)
-#define IRQ_CB_TOVER (CB_PIC_BASE_IRQ + 2)
-#define IRQ_CB_GINT0 (CB_PIC_BASE_IRQ + 3)
-#define IRQ_CB_USB (CB_PIC_BASE_IRQ + 4)
-#define IRQ_CB_LANC (CB_PIC_BASE_IRQ + 5)
-#define IRQ_CB_USB_VBUS_ON (CB_PIC_BASE_IRQ + 6)
-#define IRQ_CB_USB_VBUS_OFF (CB_PIC_BASE_IRQ + 7)
-#define IRQ_CB_EXTTM1 (CB_PIC_BASE_IRQ + 8)
-#define IRQ_CB_EXTTM2 (CB_PIC_BASE_IRQ + 9)
-
-/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
- the INTP65 - INTP67 pins on the CPU. These are shared among the GBUS
- interrupts. */
-#define IRQ_GINT(n) IRQ_INTP((n) + 9) /* 0 is unused! */
-#define IRQ_GINT_NUM 4 /* 0 is unused! */
-
-/* The shared interrupt line from the PIC is connected to CPU pin INTP23. */
-#define IRQ_CB_PIC IRQ_INTP(4) /* P23 */
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */
-#define NUM_RTE_CB_IRQS (NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
-
-
-#ifndef __ASSEMBLY__
-struct cb_pic_irq_init {
- const char *name; /* name of interrupt type */
-
- /* Range of kernel irq numbers for this type:
- BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */
- unsigned base, num, interval;
-
- unsigned priority; /* interrupt priority to assign */
-};
-struct hw_interrupt_type; /* fwd decl */
-
-/* Enable interrupt handling for interrupt IRQ. */
-extern void cb_pic_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ. Note that any interrupts
- received while disabled will be delivered once the interrupt is enabled
- again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'. */
-extern void cb_pic_disable_irq (unsigned irq);
-/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
- terminated by an entry with the name field == 0). */
-extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
- struct hw_interrupt_type *hw_irq_types);
-/* Initialize PIC interrupts. */
-extern void cb_pic_init_irqs (void);
-#endif /* __ASSEMBLY__ */
-
-
-/* TL16C550C on board UART see also asm/serial.h */
-#define CB_UART_BASE 0x0FE08000
-#define CB_UART_REG_GAP 0x10
-#define CB_UART_CLOCK 0x16000000
-
-/* CompactFlash setting */
-#define CB_CF_BASE 0x0FE0C000
-#define CB_CF_CCR_ADDR (CB_CF_BASE+0x200)
-#define CB_CF_CCR (*(volatile u8 *)CB_CF_CCR_ADDR)
-#define CB_CF_REG0_ADDR (CB_CF_BASE+0x1000)
-#define CB_CF_REG0 (*(volatile u16 *)CB_CF_REG0_ADDR)
-#define CB_CF_STS0_ADDR (CB_CF_BASE+0x1004)
-#define CB_CF_STS0 (*(volatile u16 *)CB_CF_STS0_ADDR)
-#define CB_PCATA_BASE (CB_CF_BASE+0x800)
-#define CB_IDE_BASE (CB_CF_BASE+0x9F0)
-#define CB_IDE_CTRL (CB_CF_BASE+0xBF6)
-#define CB_IDE_REG_OFFS 0x1
-
-
-/* SMSC LAN91C111 setting */
-#if defined(CONFIG_SMC91111)
-#define CB_LANC_BASE 0x0FE10300
-#define CONFIG_SMC16BITONLY
-#define ETH0_ADDR CB_LANC_BASE
-#define ETH0_IRQ IRQ_CB_LANC
-#endif /* CONFIG_SMC16BITONLY */
-
-
-#undef V850E_UART_PRE_CONFIGURE
-#define V850E_UART_PRE_CONFIGURE rte_me2_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P22 (bit 2 of port 2). */
-#define V850E_UART_CTS(chan) ((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
-/* RTS for UART channel 0 is pin P21 (bit 1 of port 2). */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- if (chan == 0) { \
- unsigned old = ME2_PORT2_IO; \
- if (val) \
- ME2_PORT2_IO = old & ~0x2; \
- else \
- ME2_PORT2_IO = old | 0x2; \
- } \
- } while (0)
-
-
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_ME2_CB_H__ */
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 00:12:07 +0300