diff options
Diffstat (limited to 'include/asm-arm/arch-sa1100/h3600.h')
| -rw-r--r-- | include/asm-arm/arch-sa1100/h3600.h | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h deleted file mode 100644 index 1b6355971574..000000000000 --- a/include/asm-arm/arch-sa1100/h3600.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * - * Definitions for H3600 Handheld Computer - * - * Copyright 2000 Compaq Computer Corporation. - * - * Use consistent with the GNU GPL is permitted, - * provided that this copyright notice is - * preserved in its entirety in all copies and derived works. - * - * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, - * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS - * FITNESS FOR ANY PARTICULAR PURPOSE. - * - * Author: Jamey Hicks. - * - * History: - * - * 2001-10-?? Andrew Christian Added support for iPAQ H3800 - * - */ - -#ifndef _INCLUDE_H3600_H_ -#define _INCLUDE_H3600_H_ - -/* generalized support for H3xxx series Compaq Pocket PC's */ -#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) - -/* Physical memory regions corresponding to chip selects */ -#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) -#define H3600_BANK_2_PHYS SA1100_CS2_PHYS -#define H3600_BANK_4_PHYS SA1100_CS4_PHYS - -/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ -#define H3600_EGPIO_VIRT 0xf0000000 -#define H3600_BANK_2_VIRT 0xf1000000 -#define H3600_BANK_4_VIRT 0xf3800000 - -/* - Machine-independent GPIO definitions - --- these are common across all current iPAQ platforms -*/ - -#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */ - -#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10) -#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11) - -/* UDA1341 L3 Interface */ -#define GPIO_H3600_L3_DATA GPIO_GPIO (14) -#define GPIO_H3600_L3_MODE GPIO_GPIO (15) -#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16) - -#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17) -#define GPIO_H3600_SYS_CLK GPIO_GPIO (19) -#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21) - -#define GPIO_H3600_COM_DCD GPIO_GPIO (23) -#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24) -#define GPIO_H3600_COM_CTS GPIO_GPIO (25) -#define GPIO_H3600_COM_RTS GPIO_GPIO (26) - -#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0 -#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10 -#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11 -#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17 -#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21 -#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23 -#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24 -#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25 - - -#ifndef __ASSEMBLY__ - -enum ipaq_egpio_type { - IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */ - IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */ - IPAQ_EGPIO_AUDIO_ON, /* Audio power */ - IPAQ_EGPIO_QMUTE, /* Audio muting */ - IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */ - IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */ - IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */ - IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */ - IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */ - IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */ - IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */ - IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */ - IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */ -}; - -struct ipaq_model_ops { - const char *generic_name; - void (*control)(enum ipaq_egpio_type, int); - unsigned long (*read)(void); - void (*blank_callback)(int blank); - int (*pm_callback)(int req); /* Primary model callback */ - int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */ -}; - -extern struct ipaq_model_ops ipaq_model_ops; - -static __inline__ const char * h3600_generic_name(void) -{ - return ipaq_model_ops.generic_name; -} - -static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,level); -} - -static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,0); -} - -static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,1); -} - -static __inline__ unsigned long read_h3600_egpio(void) -{ - if (ipaq_model_ops.read) - return ipaq_model_ops.read(); - return 0; -} - -static __inline__ int h3600_register_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = f; - return 0; -} - -static __inline__ void h3600_unregister_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = NULL; -} - - -static __inline__ int h3600_register_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = f; - return 0; -} - -static __inline__ void h3600_unregister_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = NULL; -} - -static __inline__ int h3600_power_management(int req) -{ - if (ipaq_model_ops.pm_callback) - return ipaq_model_ops.pm_callback(req); - return 0; -} - -#endif /* ASSEMBLY */ - -#endif /* _INCLUDE_H3600_H_ */ |