diff options
Diffstat (limited to 'drivers')
171 files changed, 3472 insertions, 2240 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 6bdedd7cca2c..cf047c406d92 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -820,7 +820,7 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && OF + depends on PATA_PLATFORM && OF && OF_IRQ help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index a76f24a8e5db..5249e6d918a3 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -360,7 +360,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev) ap->flags |= ATA_FLAG_SLAVE_POSS; ap->pio_mask = ATA_PIO4; - if (!irq) { + if (!gpio_is_valid(irq)) { ap->flags |= ATA_FLAG_PIO_POLLING; ata_port_desc(ap, "no IRQ, using PIO polling"); } @@ -414,8 +414,8 @@ static int __devinit pata_at91_probe(struct platform_device *pdev) host->private_data = info; - ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, - irq ? ata_sff_interrupt : NULL, + return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, + gpio_is_valid(irq) ? ata_sff_interrupt : NULL, irq_flags, &pata_at91_sht); if (!ret) diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index c2917ffad2c2..34767a6d7f42 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -139,6 +139,8 @@ #define IPMI_WDOG_SET_TIMER 0x24 #define IPMI_WDOG_GET_TIMER 0x25 +#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80 + /* These are here until the real ones get into the watchdog.h interface. */ #ifndef WDIOC_GETTIMEOUT #define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int) @@ -596,6 +598,7 @@ static int ipmi_heartbeat(void) struct kernel_ipmi_msg msg; int rv; struct ipmi_system_interface_addr addr; + int timeout_retries = 0; if (ipmi_ignore_heartbeat) return 0; @@ -616,6 +619,7 @@ static int ipmi_heartbeat(void) mutex_lock(&heartbeat_lock); +restart: atomic_set(&heartbeat_tofree, 2); /* @@ -653,7 +657,33 @@ static int ipmi_heartbeat(void) /* Wait for the heartbeat to be sent. */ wait_for_completion(&heartbeat_wait); - if (heartbeat_recv_msg.msg.data[0] != 0) { + if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) { + timeout_retries++; + if (timeout_retries > 3) { + printk(KERN_ERR PFX ": Unable to restore the IPMI" + " watchdog's settings, giving up.\n"); + rv = -EIO; + goto out_unlock; + } + + /* + * The timer was not initialized, that means the BMC was + * probably reset and lost the watchdog information. Attempt + * to restore the timer's info. Note that we still hold + * the heartbeat lock, to keep a heartbeat from happening + * in this process, so must say no heartbeat to avoid a + * deadlock on this mutex. + */ + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + if (rv) { + printk(KERN_ERR PFX ": Unable to send the command to" + " set the watchdog's settings, giving up.\n"); + goto out_unlock; + } + + /* We might need a new heartbeat, so do it now */ + goto restart; + } else if (heartbeat_recv_msg.msg.data[0] != 0) { /* * Got an error in the heartbeat response. It was already * reported in ipmi_wdog_msg_handler, but we should return @@ -662,6 +692,7 @@ static int ipmi_heartbeat(void) rv = -EINVAL; } +out_unlock: mutex_unlock(&heartbeat_lock); return rv; @@ -922,11 +953,15 @@ static struct miscdevice ipmi_wdog_miscdev = { static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, void *handler_data) { - if (msg->msg.data[0] != 0) { + if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER && + msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) + printk(KERN_INFO PFX "response: The IPMI controller appears" + " to have been reset, will attempt to reinitialize" + " the watchdog timer\n"); + else if (msg->msg.data[0] != 0) printk(KERN_ERR PFX "response: Error %x on cmd %x\n", msg->msg.data[0], msg->msg.cmd); - } ipmi_free_recv_msg(msg); } diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index 59feefe0e3e6..fb6b6d28b60e 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -58,25 +58,15 @@ static struct clocksource clocksource_dbx500_prcmu = { }; #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace dbx500_prcmu_sched_clock_read(void) { - u32 cyc; - if (unlikely(!clksrc_dbx500_timer_base)) return 0; - cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); + return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); } -static void notrace clksrc_dbx500_prcmu_update_sched_clock(void) -{ - u32 cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); - update_sched_clock(&cd, cyc, (u32)~0); -} #endif void __init clksrc_dbx500_prcmu_init(void __iomem *base) @@ -97,7 +87,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base) clksrc_dbx500_timer_base + PRCMU_TIMER_REF); } #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK - init_sched_clock(&cd, clksrc_dbx500_prcmu_update_sched_clock, + setup_sched_clock(dbx500_prcmu_sched_clock_read, 32, RATE_32K); #endif clocksource_calc_mult_shift(&clocksource_dbx500_prcmu, diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index ab8f469f5cf8..5a99bb3f255a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -124,7 +124,7 @@ config MV_XOR config MX3_IPU bool "MX3x Image Processing Unit support" - depends on ARCH_MX3 + depends on SOC_IMX31 ||Â SOC_IMX35 select DMA_ENGINE default y help @@ -216,7 +216,7 @@ config PCH_DMA config IMX_SDMA tristate "i.MX SDMA support" - depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5 + depends on ARCH_MX25 || SOC_IMX31 ||Â SOC_IMX35 || ARCH_MX5 select DMA_ENGINE help Support the i.MX SDMA engine. This engine is integrated into diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 571041477ab2..a626e15799a5 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -19,6 +19,7 @@ #include <linux/amba/pl330.h> #include <linux/pm_runtime.h> #include <linux/scatterlist.h> +#include <linux/of.h> #define NR_DEFAULT_DESC 16 @@ -116,6 +117,9 @@ struct dma_pl330_desc { struct dma_pl330_chan *pchan; }; +/* forward declaration */ +static struct amba_driver pl330_driver; + static inline struct dma_pl330_chan * to_pchan(struct dma_chan *ch) { @@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err) tasklet_schedule(&pch->task); } +bool pl330_filter(struct dma_chan *chan, void *param) +{ + u8 *peri_id; + + if (chan->device->dev->driver != &pl330_driver.drv) + return false; + +#ifdef CONFIG_OF + if (chan->device->dev->of_node) { + const __be32 *prop_value; + phandle phandle; + struct device_node *node; + + prop_value = ((struct property *)param)->value; + phandle = be32_to_cpup(prop_value++); + node = of_find_node_by_phandle(phandle); + return ((chan->private == node) && + (chan->chan_id == be32_to_cpup(prop_value))); + } +#endif + + peri_id = chan->private; + return *peri_id == (unsigned)param; +} +EXPORT_SYMBOL(pl330_filter); + static int pl330_alloc_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); @@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac) static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) { struct dma_pl330_dmac *pdmac = pch->dmac; - struct dma_pl330_peri *peri = pch->chan.private; + u8 *peri_id = pch->chan.private; struct dma_pl330_desc *desc; /* Pluck one desc from the pool of DMAC */ @@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) desc->txd.cookie = 0; async_tx_ack(&desc->txd); - if (peri) { - desc->req.rqtype = peri->rqtype; - desc->req.peri = pch->chan.chan_id; - } else { - desc->req.rqtype = MEMTOMEM; - desc->req.peri = 0; - } + desc->req.peri = peri_id ? pch->chan.chan_id : 0; dma_async_tx_descriptor_init(&desc->txd, &pch->chan); @@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( case DMA_TO_DEVICE: desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; src = dma_addr; dst = pch->fifo_addr; break; case DMA_FROM_DEVICE: desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; src = pch->fifo_addr; dst = dma_addr; break; @@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct pl330_info *pi; int burst; if (unlikely(!pch || !len)) return NULL; - if (peri && peri->rqtype != MEMTOMEM) - return NULL; - pi = &pch->dmac->pif; desc = __pl330_prep_dma_memcpy(pch, dst, src, len); @@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = MEMTOMEM; /* Select max possible burst size */ burst = pi->pcfg.data_bus_width / 8; @@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, { struct dma_pl330_desc *first, *desc = NULL; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; int i; dma_addr_t addr; - if (unlikely(!pch || !sgl || !sg_len || !peri)) + if (unlikely(!pch || !sgl || !sg_len)) return NULL; - /* Make sure the direction is consistent */ - if ((direction == DMA_TO_DEVICE && - peri->rqtype != MEMTODEV) || - (direction == DMA_FROM_DEVICE && - peri->rqtype != DEVTOMEM)) { - dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n", - __func__, __LINE__); - return NULL; - } - addr = pch->fifo_addr; first = NULL; @@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (direction == DMA_TO_DEVICE) { desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; fill_px(&desc->px, addr, sg_dma_address(sg), sg_dma_len(sg)); } else { desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; fill_px(&desc->px, sg_dma_address(sg), addr, sg_dma_len(sg)); } @@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan); + num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, + (u8)pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; - if (pdat) { - struct dma_pl330_peri *peri = &pdat->peri[i]; - - switch (peri->rqtype) { - case MEMTOMEM: - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - break; - case MEMTODEV: - case DEVTOMEM: - dma_cap_set(DMA_SLAVE, pd->cap_mask); - dma_cap_set(DMA_CYCLIC, pd->cap_mask); - break; - default: - dev_err(&adev->dev, "DEVTODEV Not Supported\n"); - continue; - } - pch->chan.private = peri; - } else { - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - pch->chan.private = NULL; - } + if (!adev->dev.of_node) + pch->chan.private = pdat ? &pdat->peri_id[i] : NULL; + else + pch->chan.private = adev->dev.of_node; INIT_LIST_HEAD(&pch->work_list); spin_lock_init(&pch->lock); @@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) } pd->dev = &adev->dev; + if (pdat) { + pd->cap_mask = pdat->cap_mask; + } else { + dma_cap_set(DMA_MEMCPY, pd->cap_mask); + if (pi->pcfg.num_peri) { + dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); + } + } pd->device_alloc_chan_resources = pl330_alloc_chan_resources; pd->device_free_chan_resources = pl330_free_chan_resources; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 866251852719..6b4d23fd158e 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -24,6 +24,9 @@ #include <linux/interrupt.h> #include <linux/sysdev.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/of_address.h> #include <asm/irq.h> @@ -2374,6 +2377,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { #endif }; +#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) +static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np, + const void *gpio_spec, u32 *flags) +{ + const __be32 *gpio = gpio_spec; + const u32 n = be32_to_cpup(gpio); + unsigned int pin = gc->base + be32_to_cpu(gpio[0]); + + if (WARN_ON(gc->of_gpio_n_cells < 4)) + return -EINVAL; + + if (n > gc->ngpio) + return -EINVAL; + + if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])))) + pr_warn("gpio_xlate: failed to set pin function\n"); + if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]))) + pr_warn("gpio_xlate: failed to set pin pull up/down\n"); + if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]))) + pr_warn("gpio_xlate: failed to set pin drive strength\n"); + + return n; +} + +static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { + { .compatible = "samsung,exynos4-gpio", }, + {} +}; + +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + struct gpio_chip *gc = &chip->chip; + u64 address; + + if (!of_have_populated_dt()) + return; + + address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; + gc->of_node = of_find_matching_node_by_address(NULL, + exynos4_gpio_dt_match, address); + if (!gc->of_node) { + pr_info("gpio: device tree node not found for gpio controller" + " with base address %08llx\n", address); + return; + } + gc->of_gpio_n_cells = 4; + gc->of_xlate = exynos4_gpio_xlate; +} +#elif defined(CONFIG_ARCH_EXYNOS4) +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + return; +} +#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */ + /* TODO: cleanup soc_is_* */ static __init int samsung_gpiolib_init(void) { @@ -2455,6 +2515,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO1, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); @@ -2467,6 +2531,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO2, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); @@ -2479,6 +2547,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO3, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index c681dc149d2a..b9da8900ae4e 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -756,9 +756,9 @@ intel_enable_semaphores(struct drm_device *dev) if (i915_semaphores >= 0) return i915_semaphores; - /* Enable semaphores on SNB when IO remapping is off */ + /* Disable semaphores on SNB */ if (INTEL_INFO(dev)->gen == 6) - return !intel_iommu_enabled; + return 0; return 1; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d809b038ca88..daa5743ccbd6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7922,13 +7922,11 @@ static bool intel_enable_rc6(struct drm_device *dev) return 0; /* - * Enable rc6 on Sandybridge if DMA remapping is disabled + * Disable rc6 on Sandybridge */ if (INTEL_INFO(dev)->gen == 6) { - DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", - intel_iommu_enabled ? "true" : "false", - !intel_iommu_enabled ? "en" : "dis"); - return !intel_iommu_enabled; + DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n"); + return 0; } DRM_DEBUG_DRIVER("RC6 enabled\n"); return 1; diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 5e00d1670aa9..92c9628c572d 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3276,6 +3276,18 @@ int evergreen_init(struct radeon_device *rdev) rdev->accel_working = false; } } + + /* Don't start up if the MC ucode is missing on BTC parts. + * The default clocks and voltages before the MC ucode + * is loaded are not suffient for advanced operations. + */ + if (ASIC_IS_DCE5(rdev)) { + if (!rdev->mc_fw && !(rdev->flags & RADEON_IS_IGP)) { + DRM_ERROR("radeon: MC ucode required for NI+.\n"); + return -EINVAL; + } + } + return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 8cca91a93bde..dc279706ca70 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -390,6 +390,11 @@ extern int vmw_context_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, int id, struct vmw_resource **p_res); +extern int vmw_user_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out_surf, + struct vmw_dma_buffer **out_buf); extern void vmw_surface_res_free(struct vmw_resource *res); extern int vmw_surface_init(struct vmw_private *dev_priv, struct vmw_surface *srf, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 03bbc2a6f9a7..a0c2f12b1e1b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -33,6 +33,7 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; uint32_t fifo_min, hwversion; + const struct vmw_fifo_state *fifo = &dev_priv->fifo; if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO)) return false; @@ -41,7 +42,12 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv) if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int)) return false; - hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + hwversion = ioread32(fifo_mem + + ((fifo->capabilities & + SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ? + SVGA_FIFO_3D_HWVERSION_REVISED : + SVGA_FIFO_3D_HWVERSION)); + if (hwversion == 0) return false; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 5ff561d4e0b4..66917c6c3813 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -58,8 +58,14 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, case DRM_VMW_PARAM_FIFO_HW_VERSION: { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; - - param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + const struct vmw_fifo_state *fifo = &dev_priv->fifo; + + param->value = + ioread32(fifo_mem + + ((fifo->capabilities & + SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ? + SVGA_FIFO_3D_HWVERSION_REVISED : + SVGA_FIFO_3D_HWVERSION)); break; } default: @@ -166,13 +172,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data, ret = -EINVAL; goto out_no_fb; } - vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj)); - if (!vfb->dmabuf) { - DRM_ERROR("Framebuffer not dmabuf backed.\n"); - ret = -EINVAL; - goto out_no_fb; - } ret = ttm_read_lock(&vmaster->lock, true); if (unlikely(ret != 0)) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 37d40545ed77..f94b33ae2215 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -31,6 +31,44 @@ /* Might need a hrtimer here? */ #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1) + +struct vmw_clip_rect { + int x1, x2, y1, y2; +}; + +/** + * Clip @num_rects number of @rects against @clip storing the + * results in @out_rects and the number of passed rects in @out_num. + */ +void vmw_clip_cliprects(struct drm_clip_rect *rects, + int num_rects, + struct vmw_clip_rect clip, + SVGASignedRect *out_rects, + int *out_num) +{ + int i, k; + + for (i = 0, k = 0; i < num_rects; i++) { + int x1 = max_t(int, clip.x1, rects[i].x1); + int y1 = max_t(int, clip.y1, rects[i].y1); + int x2 = min_t(int, clip.x2, rects[i].x2); + int y2 = min_t(int, clip.y2, rects[i].y2); + + if (x1 >= x2) + continue; + if (y1 >= y2) + continue; + + out_rects[k].left = x1; + out_rects[k].top = y1; + out_rects[k].right = x2; + out_rects[k].bottom = y2; + k++; + } + + *out_num = k; +} + void vmw_display_unit_cleanup(struct vmw_display_unit *du) { if (du->cursor_surface) @@ -82,6 +120,43 @@ int vmw_cursor_update_image(struct vmw_private *dev_priv, return 0; } +int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv, + struct vmw_dma_buffer *dmabuf, + u32 width, u32 height, + u32 hotspotX, u32 hotspotY) +{ + struct ttm_bo_kmap_obj map; + unsigned long kmap_offset; + unsigned long kmap_num; + void *virtual; + bool dummy; + int ret; + + kmap_offset = 0; + kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT; + + ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0); + if (unlikely(ret != 0)) { + DRM_ERROR("reserve failed\n"); + return -EINVAL; + } + + ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map); + if (unlikely(ret != 0)) + goto err_unreserve; + + virtual = ttm_kmap_obj_virtual(&map, &dummy); + ret = vmw_cursor_update_image(dev_priv, virtual, width, height, + hotspotX, hotspotY); + + ttm_bo_kunmap(&map); +err_unreserve: + ttm_bo_unreserve(&dmabuf->base); + + return ret; +} + + void vmw_cursor_update_position(struct vmw_private *dev_priv, bool show, int x, int y) { @@ -110,24 +185,21 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, return -EINVAL; if (handle) { - ret = vmw_user_surface_lookup_handle(dev_priv, tfile, - handle, &surface); - if (!ret) { - if (!surface->snooper.image) { - DRM_ERROR("surface not suitable for cursor\n"); - vmw_surface_unreference(&surface); - return -EINVAL; - } - } else { - ret = vmw_user_dmabuf_lookup(tfile, - handle, &dmabuf); - if (ret) { - DRM_ERROR("failed to find surface or dmabuf: %i\n", ret); - return -EINVAL; - } + ret = vmw_user_lookup_handle(dev_priv, tfile, + handle, &surface, &dmabuf); + if (ret) { + DRM_ERROR("failed to find surface or dmabuf: %i\n", ret); + return -EINVAL; } } + /* need to do this before taking down old image */ + if (surface && !surface->snooper.image) { + DRM_ERROR("surface not suitable for cursor\n"); + vmw_surface_unreference(&surface); + return -EINVAL; + } + /* takedown old cursor */ if (du->cursor_surface) { du->cursor_surface->snooper.crtc = NULL; @@ -146,36 +218,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, vmw_cursor_update_image(dev_priv, surface->snooper.image, 64, 64, du->hotspot_x, du->hotspot_y); } else if (dmabuf) { - struct ttm_bo_kmap_obj map; - unsigned long kmap_offset; - unsigned long kmap_num; - void *virtual; - bool dummy; - /* vmw_user_surface_lookup takes one reference */ du->cursor_dmabuf = dmabuf; - kmap_offset = 0; - kmap_num = (64*64*4) >> PAGE_SHIFT; - - ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0); - if (unlikely(ret != 0)) { - DRM_ERROR("reserve failed\n"); - return -EINVAL; - } - - ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map); - if (unlikely(ret != 0)) - goto err_unreserve; - - virtual = ttm_kmap_obj_virtual(&map, &dummy); - vmw_cursor_update_image(dev_priv, virtual, 64, 64, - du->hotspot_x, du->hotspot_y); - - ttm_bo_kunmap(&map); -err_unreserve: - ttm_bo_unreserve(&dmabuf->base); - + ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, width, height, + du->hotspot_x, du->hotspot_y); } else { vmw_cursor_update_position(dev_priv, false, 0, 0); return 0; @@ -377,8 +424,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, struct drm_clip_rect *clips, unsigned num_clips, int inc) { - struct drm_clip_rect *clips_ptr; struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *clips_ptr; + struct drm_clip_rect *tmp; struct drm_crtc *crtc; size_t fifo_size; int i, num_units; @@ -391,7 +439,6 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, } *cmd; SVGASignedRect *blits; - num_units = 0; list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) { @@ -402,13 +449,24 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, BUG_ON(!clips || !num_clips); + tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL); + if (unlikely(tmp == NULL)) { + DRM_ERROR("Temporary cliprect memory alloc failed.\n"); + return -ENOMEM; + } + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips; cmd = kzalloc(fifo_size, GFP_KERNEL); if (unlikely(cmd == NULL)) { DRM_ERROR("Temporary fifo memory alloc failed.\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_tmp; } + /* setup blits pointer */ + blits = (SVGASignedRect *)&cmd[1]; + + /* initial clip region */ left = clips->x1; right = clips->x2; top = clips->y1; @@ -434,45 +492,60 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, cmd->body.srcRect.bottom = bottom; clips_ptr = clips; - blits = (SVGASignedRect *)&cmd[1]; for (i = 0; i < num_clips; i++, clips_ptr += inc) { - blits[i].left = clips_ptr->x1 - left; - blits[i].right = clips_ptr->x2 - left; - blits[i].top = clips_ptr->y1 - top; - blits[i].bottom = clips_ptr->y2 - top; + tmp[i].x1 = clips_ptr->x1 - left; + tmp[i].x2 = clips_ptr->x2 - left; + tmp[i].y1 = clips_ptr->y1 - top; + tmp[i].y2 = clips_ptr->y2 - top; } /* do per unit writing, reuse fifo for each */ for (i = 0; i < num_units; i++) { struct vmw_display_unit *unit = units[i]; - int clip_x1 = left - unit->crtc.x; - int clip_y1 = top - unit->crtc.y; - int clip_x2 = right - unit->crtc.x; - int clip_y2 = bottom - unit->crtc.y; + struct vmw_clip_rect clip; + int num; + + clip.x1 = left - unit->crtc.x; + clip.y1 = top - unit->crtc.y; + clip.x2 = right - unit->crtc.x; + clip.y2 = bottom - unit->crtc.y; /* skip any crtcs that misses the clip region */ - if (clip_x1 >= unit->crtc.mode.hdisplay || - clip_y1 >= unit->crtc.mode.vdisplay || - clip_x2 <= 0 || clip_y2 <= 0) + if (clip.x1 >= unit->crtc.mode.hdisplay || + clip.y1 >= unit->crtc.mode.vdisplay || + clip.x2 <= 0 || clip.y2 <= 0) continue; + /* + * In order for the clip rects to be correctly scaled + * the src and dest rects needs to be the same size. + */ + cmd->body.destRect.left = clip.x1; + cmd->body.destRect.right = clip.x2; + cmd->body.destRect.top = clip.y1; + cmd->body.destRect.bottom = clip.y2; + + /* create a clip rect of the crtc in dest coords */ + clip.x2 = unit->crtc.mode.hdisplay - clip.x1; + clip.y2 = unit->crtc.mode.vdisplay - clip.y1; + clip.x1 = 0 - clip.x1; + clip.y1 = 0 - clip.y1; + /* need to reset sid as it is changed by execbuf */ cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle); - cmd->body.destScreenId = unit->unit; - /* - * The blit command is a lot more resilient then the - * readback command when it comes to clip rects. So its - * okay to go out of bounds. - */ + /* clip and write blits to cmd stream */ + vmw_clip_cliprects(tmp, num_clips, clip, blits, &num); - cmd->body.destRect.left = clip_x1; - cmd->body.destRect.right = clip_x2; - cmd->body.destRect.top = clip_y1; - cmd->body.destRect.bottom = clip_y2; + /* if no cliprects hit skip this */ + if (num == 0) + continue; + /* recalculate package length */ + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num; + cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, fifo_size, 0, NULL); @@ -480,7 +553,10 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, break; } + kfree(cmd); +out_free_tmp: + kfree(tmp); return ret; } @@ -556,6 +632,10 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv, * Sanity checks. */ + /* Surface must be marked as a scanout. */ + if (unlikely(!surface->scanout)) + return -EINVAL; + if (unlikely(surface->mip_levels[0] != 1 || surface->num_sizes != 1 || surface->sizes[0].width < mode_cmd->width || @@ -782,6 +862,7 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv, int clip_y1 = clips_ptr->y1 - unit->crtc.y; int clip_x2 = clips_ptr->x2 - unit->crtc.x; int clip_y2 = clips_ptr->y2 - unit->crtc.y; + int move_x, move_y; /* skip any crtcs that misses the clip region */ if (clip_x1 >= unit->crtc.mode.hdisplay || @@ -789,12 +870,21 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv, clip_x2 <= 0 || clip_y2 <= 0) continue; + /* clip size to crtc size */ + clip_x2 = min_t(int, clip_x2, unit->crtc.mode.hdisplay); + clip_y2 = min_t(int, clip_y2, unit->crtc.mode.vdisplay); + + /* translate both src and dest to bring clip into screen */ + move_x = min_t(int, clip_x1, 0); + move_y = min_t(int, clip_y1, 0); + + /* actual translate done here */ blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN; blits[hit_num].body.destScreenId = unit->unit; - blits[hit_num].body.srcOrigin.x = clips_ptr->x1; - blits[hit_num].body.srcOrigin.y = clips_ptr->y1; - blits[hit_num].body.destRect.left = clip_x1; - blits[hit_num].body.destRect.top = clip_y1; + blits[hit_num].body.srcOrigin.x = clips_ptr->x1 - move_x; + blits[hit_num].body.srcOrigin.y = clips_ptr->y1 - move_y; + blits[hit_num].body.destRect.left = clip_x1 - move_x; + blits[hit_num].body.destRect.top = clip_y1 - move_y; blits[hit_num].body.destRect.right = clip_x2; blits[hit_num].body.destRect.bottom = clip_y2; hit_num++; @@ -1003,7 +1093,6 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, struct vmw_surface *surface = NULL; struct vmw_dma_buffer *bo = NULL; struct ttm_base_object *user_obj; - u64 required_size; int ret; /** @@ -1012,8 +1101,9 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, * requested framebuffer. */ - required_size = mode_cmd->pitch * mode_cmd->height; - if (unlikely(required_size > (u64) dev_priv->vram_size)) { + if (!vmw_kms_validate_mode_vram(dev_priv, + mode_cmd->pitch, + mode_cmd->height)) { DRM_ERROR("VRAM size is too small for requested mode.\n"); return ERR_PTR(-ENOMEM); } @@ -1033,46 +1123,29 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, return ERR_PTR(-ENOENT); } - /** - * End conditioned code. - */ - - ret = vmw_user_surface_lookup_handle(dev_priv, tfile, - mode_cmd->handle, &surface); + /* returns either a dmabuf or surface */ + ret = vmw_user_lookup_handle(dev_priv, tfile, + mode_cmd->handle, + &surface, &bo); if (ret) - goto try_dmabuf; - - if (!surface->scanout) - goto err_not_scanout; - - ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, surface, - &vfb, mode_cmd); - - /* vmw_user_surface_lookup takes one ref so does new_fb */ - vmw_surface_unreference(&surface); - - if (ret) { - DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); - ttm_base_object_unref(&user_obj); - return ERR_PTR(ret); - } else - vfb->user_obj = user_obj; - return &vfb->base; - -try_dmabuf: - DRM_INFO("%s: trying buffer\n", __func__); - - ret = vmw_user_dmabuf_lookup(tfile, mode_cmd->handle, &bo); - if (ret) { - DRM_ERROR("failed to find buffer: %i\n", ret); - return ERR_PTR(-ENOENT); - } - - ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb, - mode_cmd); + goto err_out; + + /* Create the new framebuffer depending one what we got back */ + if (bo) + ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb, + mode_cmd); + else if (surface) + ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, + surface, &vfb, mode_cmd); + else + BUG(); - /* vmw_user_dmabuf_lookup takes one ref so does new_fb */ - vmw_dmabuf_unreference(&bo); +err_out: + /* vmw_user_lookup_handle takes one ref so does new_fb */ + if (bo) + vmw_dmabuf_unreference(&bo); + if (surface) + vmw_surface_unreference(&surface); if (ret) { DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); @@ -1082,14 +1155,6 @@ try_dmabuf: vfb->user_obj = user_obj; return &vfb->base; - -err_not_scanout: - DRM_ERROR("surface not marked as scanout\n"); - /* vmw_user_surface_lookup takes one ref */ - vmw_surface_unreference(&surface); - ttm_base_object_unref(&user_obj); - - return ERR_PTR(-EINVAL); } static struct drm_mode_config_funcs vmw_kms_funcs = { @@ -1106,10 +1171,12 @@ int vmw_kms_present(struct vmw_private *dev_priv, uint32_t num_clips) { struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *tmp; struct drm_crtc *crtc; size_t fifo_size; int i, k, num_units; int ret = 0; /* silence warning */ + int left, right, top, bottom; struct { SVGA3dCmdHeader header; @@ -1127,60 +1194,95 @@ int vmw_kms_present(struct vmw_private *dev_priv, BUG_ON(surface == NULL); BUG_ON(!clips || !num_clips); + tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL); + if (unlikely(tmp == NULL)) { + DRM_ERROR("Temporary cliprect memory alloc failed.\n"); + return -ENOMEM; + } + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips; cmd = kmalloc(fifo_size, GFP_KERNEL); if (unlikely(cmd == NULL)) { DRM_ERROR("Failed to allocate temporary fifo memory.\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_tmp; + } + + left = clips->x; + right = clips->x + clips->w; + top = clips->y; + bottom = clips->y + clips->h; + + for (i = 1; i < num_clips; i++) { + left = min_t(int, left, (int)clips[i].x); + right = max_t(int, right, (int)clips[i].x + clips[i].w); + top = min_t(int, top, (int)clips[i].y); + bottom = max_t(int, bottom, (int)clips[i].y + clips[i].h); } /* only need to do this once */ memset(cmd, 0, fifo_size); cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN); - cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); - - cmd->body.srcRect.left = 0; - cmd->body.srcRect.right = surface->sizes[0].width; - cmd->body.srcRect.top = 0; - cmd->body.srcRect.bottom = surface->sizes[0].height; blits = (SVGASignedRect *)&cmd[1]; + + cmd->body.srcRect.left = left; + cmd->body.srcRect.right = right; + cmd->body.srcRect.top = top; + cmd->body.srcRect.bottom = bottom; + for (i = 0; i < num_clips; i++) { - blits[i].left = clips[i].x; - blits[i].right = clips[i].x + clips[i].w; - blits[i].top = clips[i].y; - blits[i].bottom = clips[i].y + clips[i].h; + tmp[i].x1 = clips[i].x - left; + tmp[i].x2 = clips[i].x + clips[i].w - left; + tmp[i].y1 = clips[i].y - top; + tmp[i].y2 = clips[i].y + clips[i].h - top; } for (k = 0; k < num_units; k++) { struct vmw_display_unit *unit = units[k]; - int clip_x1 = destX - unit->crtc.x; - int clip_y1 = destY - unit->crtc.y; - int clip_x2 = clip_x1 + surface->sizes[0].width; - int clip_y2 = clip_y1 + surface->sizes[0].height; + struct vmw_clip_rect clip; + int num; + + clip.x1 = left + destX - unit->crtc.x; + clip.y1 = top + destY - unit->crtc.y; + clip.x2 = right + destX - unit->crtc.x; + clip.y2 = bottom + destY - unit->crtc.y; /* skip any crtcs that misses the clip region */ - if (clip_x1 >= unit->crtc.mode.hdisplay || - clip_y1 >= unit->crtc.mode.vdisplay || - clip_x2 <= 0 || clip_y2 <= 0) + if (clip.x1 >= unit->crtc.mode.hdisplay || + clip.y1 >= unit->crtc.mode.vdisplay || + clip.x2 <= 0 || clip.y2 <= 0) continue; + /* + * In order for the clip rects to be correctly scaled + * the src and dest rects needs to be the same size. + */ + cmd->body.destRect.left = clip.x1; + cmd->body.destRect.right = clip.x2; + cmd->body.destRect.top = clip.y1; + cmd->body.destRect.bottom = clip.y2; + + /* create a clip rect of the crtc in dest coords */ + clip.x2 = unit->crtc.mode.hdisplay - clip.x1; + clip.y2 = unit->crtc.mode.vdisplay - clip.y1; + clip.x1 = 0 - clip.x1; + clip.y1 = 0 - clip.y1; + /* need to reset sid as it is changed by execbuf */ cmd->body.srcImage.sid = sid; - cmd->body.destScreenId = unit->unit; - /* - * The blit command is a lot more resilient then the - * readback command when it comes to clip rects. So its - * okay to go out of bounds. - */ + /* clip and write blits to cmd stream */ + vmw_clip_cliprects(tmp, num_clips, clip, blits, &num); - cmd->body.destRect.left = clip_x1; - cmd->body.destRect.right = clip_x2; - cmd->body.destRect.top = clip_y1; - cmd->body.destRect.bottom = clip_y2; + /* if no cliprects hit skip this */ + if (num == 0) + continue; + /* recalculate package length */ + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num; + cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, fifo_size, 0, NULL); @@ -1189,6 +1291,8 @@ int vmw_kms_present(struct vmw_private *dev_priv, } kfree(cmd); +out_free_tmp: + kfree(tmp); return ret; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index af8e6e5bd964..e1cb8556355f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -62,9 +62,14 @@ struct vmw_framebuffer { int vmw_cursor_update_image(struct vmw_private *dev_priv, u32 *image, u32 width, u32 height, u32 hotspotX, u32 hotspotY); +int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv, + struct vmw_dma_buffer *dmabuf, + u32 width, u32 height, + u32 hotspotX, u32 hotspotY); void vmw_cursor_update_position(struct vmw_private *dev_priv, bool show, int x, int y); + /** * Base class display unit. * diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index 90c5e3928491..8f8dbd43c33d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -74,9 +74,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv) { struct vmw_legacy_display *lds = dev_priv->ldu_priv; struct vmw_legacy_display_unit *entry; + struct vmw_display_unit *du = NULL; struct drm_framebuffer *fb = NULL; struct drm_crtc *crtc = NULL; - int i = 0; + int i = 0, ret; /* If there is no display topology the host just assumes * that the guest will set the same layout as the host. @@ -129,6 +130,25 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv) lds->last_num_active = lds->num_active; + + /* Find the first du with a cursor. */ + list_for_each_entry(entry, &lds->active, active) { + du = &entry->base; + + if (!du->cursor_dmabuf) + continue; + + ret = vmw_cursor_update_dmabuf(dev_priv, + du->cursor_dmabuf, + 64, 64, + du->hotspot_x, + du->hotspot_y); + if (ret == 0) + break; + + DRM_ERROR("Could not update cursor image\n"); + } + return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 86c5e4cceb31..1c7f09e26819 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1190,6 +1190,29 @@ void vmw_resource_unreserve(struct list_head *list) write_unlock(lock); } +/** + * Helper function that looks either a surface or dmabuf. + * + * The pointer this pointed at by out_surf and out_buf needs to be null. + */ +int vmw_user_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out_surf, + struct vmw_dma_buffer **out_buf) +{ + int ret; + + BUG_ON(*out_surf || *out_buf); + + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, out_surf); + if (!ret) + return 0; + + ret = vmw_user_dmabuf_lookup(tfile, handle, out_buf); + return ret; +} + int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, struct ttm_object_file *tfile, diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 8cebef49aeac..18936ac9d51c 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -893,6 +893,13 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, /* Set the number of I2C channel instance */ adap_info->ch_num = id->driver_data; + ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, + KBUILD_MODNAME, adap_info); + if (ret) { + pch_pci_err(pdev, "request_irq FAILED\n"); + goto err_request_irq; + } + for (i = 0; i < adap_info->ch_num; i++) { pch_adap = &adap_info->pch_data[i].pch_adapter; adap_info->pch_i2c_suspended = false; @@ -910,28 +917,23 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, pch_adap->dev.parent = &pdev->dev; + pch_i2c_init(&adap_info->pch_data[i]); ret = i2c_add_adapter(pch_adap); if (ret) { pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); - goto err_i2c_add_adapter; + goto err_add_adapter; } - - pch_i2c_init(&adap_info->pch_data[i]); - } - ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, - KBUILD_MODNAME, adap_info); - if (ret) { - pch_pci_err(pdev, "request_irq FAILED\n"); - goto err_i2c_add_adapter; } pci_set_drvdata(pdev, adap_info); pch_pci_dbg(pdev, "returns %d.\n", ret); return 0; -err_i2c_add_adapter: +err_add_adapter: for (j = 0; j < i; j++) i2c_del_adapter(&adap_info->pch_data[j].pch_adapter); + free_irq(pdev->irq, adap_info); +err_request_irq: pci_iounmap(pdev, base_addr); err_pci_iomap: pci_release_regions(pdev); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index a43d0023446a..fa23faa20f0e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1047,13 +1047,14 @@ omap_i2c_probe(struct platform_device *pdev) * size. This is to ensure that we can handle the status on int * call back latencies. */ - if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) { - dev->fifo_size = 0; + + dev->fifo_size = (dev->fifo_size / 2); + + if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) dev->b_hw = 0; /* Disable hardware fixes */ - } else { - dev->fifo_size = (dev->fifo_size / 2); + else dev->b_hw = 1; /* Enable hardware fixes */ - } + /* calculate wakeup latency constraint for MPU */ if (dev->set_mpu_wkup_lat != NULL) dev->latency = (1000000 * dev->fifo_size) / diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 2754cef86a06..4c1718081685 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -534,6 +534,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, /* first, try busy waiting briefly */ do { + cpu_relax(); iicstat = readl(i2c->regs + S3C2410_IICSTAT); } while ((iicstat & S3C2410_IICSTAT_START) && --spins); @@ -786,7 +787,7 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) #else static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) { - return -EINVAL; + return 0; } static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 6dede8f366c5..41d415529479 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -314,7 +314,7 @@ static int __init at91_ide_probe(struct platform_device *pdev) apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0); /* with GPIO interrupt we have to do quirks in handler */ - if (board->irq_pin >= PIN_BASE) + if (gpio_is_valid(board->irq_pin)) host->irq_handler = at91_irq_handler; host->ports[0]->select_data = board->chipselect; diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 75ff821c0af0..d0d4aa9f4802 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2513,6 +2513,9 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv, req.private_data_len = sizeof(struct cma_hdr) + conn_param->private_data_len; + if (req.private_data_len < conn_param->private_data_len) + return -EINVAL; + req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC); if (!req.private_data) return -ENOMEM; @@ -2562,6 +2565,9 @@ static int cma_connect_ib(struct rdma_id_private *id_priv, memset(&req, 0, sizeof req); offset = cma_user_data_offset(id_priv->id.ps); req.private_data_len = offset + conn_param->private_data_len; + if (req.private_data_len < conn_param->private_data_len) + return -EINVAL; + private_data = kzalloc(req.private_data_len, GFP_ATOMIC); if (!private_data) return -ENOMEM; diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 77f3dbc0aaa1..18836cdf1e10 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1244,7 +1244,8 @@ err_reg: err_counter: for (; i; --i) - mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]); + if (ibdev->counters[i - 1] != -1) + mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]); err_map: iounmap(ibdev->uar_map); @@ -1275,7 +1276,8 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr) } iounmap(ibdev->uar_map); for (p = 0; p < ibdev->num_ports; ++p) - mlx4_counter_free(ibdev->dev, ibdev->counters[p]); + if (ibdev->counters[p] != -1) + mlx4_counter_free(ibdev->dev, ibdev->counters[p]); mlx4_foreach_port(p, dev, MLX4_PORT_TYPE_IB) mlx4_CLOSE_PORT(dev, p); diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 574600ef5b42..a7403248d83d 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1285,7 +1285,7 @@ static int setup_ctxt(struct qib_pportdata *ppd, int ctxt, strlcpy(rcd->comm, current->comm, sizeof(rcd->comm)); ctxt_fp(fp) = rcd; qib_stats.sps_ctxts++; - dd->freectxts++; + dd->freectxts--; ret = 0; goto bail; @@ -1794,7 +1794,7 @@ static int qib_close(struct inode *in, struct file *fp) if (dd->pageshadow) unlock_expected_tids(rcd); qib_stats.sps_ctxts--; - dd->freectxts--; + dd->freectxts++; } mutex_unlock(&qib_mutex); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index f689f49e3109..8a0060cd3982 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -21,6 +21,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/sched.h> #include <plat/keypad.h> @@ -68,31 +70,26 @@ struct samsung_keypad { wait_queue_head_t wait; bool stopped; int irq; + enum samsung_keypad_type type; unsigned int row_shift; unsigned int rows; unsigned int cols; unsigned int row_state[SAMSUNG_MAX_COLS]; +#ifdef CONFIG_OF + int row_gpios[SAMSUNG_MAX_ROWS]; + int col_gpios[SAMSUNG_MAX_COLS]; +#endif unsigned short keycodes[]; }; -static int samsung_keypad_is_s5pv210(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - enum samsung_keypad_type type = - platform_get_device_id(pdev)->driver_data; - - return type == KEYPAD_TYPE_S5PV210; -} - static void samsung_keypad_scan(struct samsung_keypad *keypad, unsigned int *row_state) { - struct device *dev = keypad->input_dev->dev.parent; unsigned int col; unsigned int val; for (col = 0; col < keypad->cols; col++) { - if (samsung_keypad_is_s5pv210(dev)) { + if (keypad->type == KEYPAD_TYPE_S5PV210) { val = S5PV210_KEYIFCOLEN_MASK; val &= ~(1 << col) << 8; } else { @@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev) samsung_keypad_stop(keypad); } +#ifdef CONFIG_OF +static struct samsung_keypad_platdata *samsung_keypad_parse_dt( + struct device *dev) +{ + struct samsung_keypad_platdata *pdata; + struct matrix_keymap_data *keymap_data; + uint32_t *keymap, num_rows = 0, num_cols = 0; + struct device_node *np = dev->of_node, *key_np; + unsigned int key_count = 0; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return NULL; + } + + of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows); + of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols); + if (!num_rows || !num_cols) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return NULL; + } + pdata->rows = num_rows; + pdata->cols = num_cols; + + keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL); + if (!keymap_data) { + dev_err(dev, "could not allocate memory for keymap data\n"); + return NULL; + } + pdata->keymap_data = keymap_data; + + for_each_child_of_node(np, key_np) + key_count++; + + keymap_data->keymap_size = key_count; + keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL); + if (!keymap) { + dev_err(dev, "could not allocate memory for keymap\n"); + return NULL; + } + keymap_data->keymap = keymap; + + for_each_child_of_node(np, key_np) { + u32 row, col, key_code; + of_property_read_u32(key_np, "keypad,row", &row); + of_property_read_u32(key_np, "keypad,column", &col); + of_property_read_u32(key_np, "linux,code", &key_code); + *keymap++ = KEY(row, col, key_code); + } + + if (of_get_property(np, "linux,input-no-autorepeat", NULL)) + pdata->no_autorepeat = true; + if (of_get_property(np, "linux,input-wakeup", NULL)) + pdata->wakeup = true; + + return pdata; +} + +static void samsung_keypad_parse_dt_gpio(struct device *dev, + struct samsung_keypad *keypad) +{ + struct device_node *np = dev->of_node; + int gpio, ret, row, col; + + for (row = 0; row < keypad->rows; row++) { + gpio = of_get_named_gpio(np, "row-gpios", row); + keypad->row_gpios[row] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad row[%d]: invalid gpio %d\n", + row, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-row"); + if (ret) + dev_err(dev, "keypad row[%d] gpio request failed\n", + row); + } + + for (col = 0; col < keypad->cols; col++) { + gpio = of_get_named_gpio(np, "col-gpios", col); + keypad->col_gpios[col] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad column[%d]: invalid gpio %d\n", + col, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-col"); + if (ret) + dev_err(dev, "keypad column[%d] gpio request failed\n", + col); + } +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ + int cnt; + + for (cnt = 0; cnt < keypad->rows; cnt++) + if (gpio_is_valid(keypad->row_gpios[cnt])) + gpio_free(keypad->row_gpios[cnt]); + + for (cnt = 0; cnt < keypad->cols; cnt++) + if (gpio_is_valid(keypad->col_gpios[cnt])) + gpio_free(keypad->col_gpios[cnt]); +} +#else +static +struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev) +{ + return NULL; +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ +} +#endif + static int __devinit samsung_keypad_probe(struct platform_device *pdev) { const struct samsung_keypad_platdata *pdata; @@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) unsigned int keymap_size; int error; - pdata = pdev->dev.platform_data; + if (pdev->dev.of_node) + pdata = samsung_keypad_parse_dt(&pdev->dev); + else + pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); return -EINVAL; @@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) keypad->cols = pdata->cols; init_waitqueue_head(&keypad->wait); + if (pdev->dev.of_node) { +#ifdef CONFIG_OF + samsung_keypad_parse_dt_gpio(&pdev->dev, keypad); + keypad->type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s5pv210-keypad"); +#endif + } else { + keypad->type = platform_get_device_id(pdev)->driver_data; + } + input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; @@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, pdata->wakeup); platform_set_drvdata(pdev, keypad); + + if (pdev->dev.of_node) { + devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap); + devm_kfree(&pdev->dev, (void *)pdata->keymap_data); + devm_kfree(&pdev->dev, (void *)pdata); + } return 0; err_free_irq: free_irq(keypad->irq, keypad); err_put_clk: clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); err_unmap_base: iounmap(keypad->base); err_free_mem: @@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev) free_irq(keypad->irq, keypad); clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); iounmap(keypad->base); kfree(keypad); @@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = { }; #endif +#ifdef CONFIG_OF +static const struct of_device_id samsung_keypad_dt_match[] = { + { .compatible = "samsung,s3c6410-keypad" }, + { .compatible = "samsung,s5pv210-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match); +#else +#define samsung_keypad_dt_match NULL +#endif + static struct platform_device_id samsung_keypad_driver_ids[] = { { .name = "samsung-keypad", @@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = { .driver = { .name = "samsung-keypad", .owner = THIS_MODULE, + .of_match_table = samsung_keypad_dt_match, #ifdef CONFIG_PM .pm = &samsung_keypad_pm_ops, #endif diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c index 80793f1608eb..06517e60e50c 100644 --- a/drivers/input/misc/cma3000_d0x.c +++ b/drivers/input/misc/cma3000_d0x.c @@ -115,8 +115,8 @@ static void decode_mg(struct cma3000_accl_data *data, int *datax, static irqreturn_t cma3000_thread_irq(int irq, void *dev_id) { struct cma3000_accl_data *data = dev_id; - int datax, datay, dataz; - u8 ctrl, mode, range, intr_status; + int datax, datay, dataz, intr_status; + u8 ctrl, mode, range; intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status"); if (intr_status < 0) diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index c5b12d2e955a..86d6f39178b0 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -162,7 +162,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { /* inversion is required */ @@ -261,7 +261,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); @@ -309,7 +309,7 @@ static int fsp_get_buttons(struct psmouse *psmouse, int *btn) }; int val; - if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1) + if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS, &val) == -1) return -EIO; *btn = buttons[(val & 0x30) >> 4]; diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index ed1395ac7b8b..2e4af24f8c15 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -33,6 +33,7 @@ /* Finger-sensing Pad control registers */ #define FSP_REG_SYSCTL1 0x10 #define FSP_BIT_EN_REG_CLK BIT(5) +#define FSP_REG_TMOD_STATUS 0x20 #define FSP_REG_OPC_QDOWN 0x31 #define FSP_BIT_EN_OPC_TAG BIT(7) #define FSP_REG_OPTZ_XLO 0x34 diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index c080b828e5dc..a6dcd18e9adf 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -24,6 +24,7 @@ */ #include <linux/module.h> +#include <linux/delay.h> #include <linux/dmi.h> #include <linux/input/mt.h> #include <linux/serio.h> @@ -1220,6 +1221,16 @@ static int synaptics_reconnect(struct psmouse *psmouse) do { psmouse_reset(psmouse); + if (retry) { + /* + * On some boxes, right after resuming, the touchpad + * needs some time to finish initializing (I assume + * it needs time to calibrate) and start responding + * to Synaptics-specific queries, so let's wait a + * bit. + */ + ssleep(1); + } error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index da0d8761e778..2ee47d01a3b4 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1470,6 +1470,9 @@ static const struct wacom_features wacom_features_0xE3 = static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xEC = + { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1611,6 +1614,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, { USB_DEVICE_WACOM(0xE6) }, + { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_LENOVO(0x6004) }, { } diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 2fb2963df553..5b5fa5cdaa31 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -90,7 +90,7 @@ struct iommu_domain *iommu_domain_alloc(struct bus_type *bus) if (bus == NULL || bus->iommu_ops == NULL) return NULL; - domain = kmalloc(sizeof(*domain), GFP_KERNEL); + domain = kzalloc(sizeof(*domain), GFP_KERNEL); if (!domain) return NULL; diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index b6907118283a..6d03774b176e 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1393,9 +1393,6 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto atomic_read(&bitmap->behind_writes), bitmap->mddev->bitmap_info.max_write_behind); } - if (bitmap->mddev->degraded) - /* Never clear bits or update events_cleared when degraded */ - success = 0; while (sectors) { sector_t blocks; @@ -1409,7 +1406,7 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto return; } - if (success && + if (success && !bitmap->mddev->degraded && bitmap->events_cleared < bitmap->mddev->events) { bitmap->events_cleared = bitmap->mddev->events; bitmap->need_sync = 1; diff --git a/drivers/md/linear.c b/drivers/md/linear.c index c3273efd08cb..627456542fb3 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -230,6 +230,7 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev) return -EINVAL; rdev->raid_disk = rdev->saved_raid_disk; + rdev->saved_raid_disk = -1; newconf = linear_conf(mddev,mddev->raid_disks+1); diff --git a/drivers/md/md.c b/drivers/md/md.c index ee981737edfc..f47f1f8ac44b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7360,8 +7360,7 @@ static int remove_and_add_spares(struct mddev *mddev) spares++; md_new_event(mddev); set_bit(MD_CHANGE_DEVS, &mddev->flags); - } else - break; + } } } } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 31670f8d6b65..858fdbb7eb07 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3065,11 +3065,17 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } } else if (test_bit(In_sync, &rdev->flags)) set_bit(R5_Insync, &dev->flags); - else { + else if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) /* in sync if before recovery_offset */ - if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) - set_bit(R5_Insync, &dev->flags); - } + set_bit(R5_Insync, &dev->flags); + else if (test_bit(R5_UPTODATE, &dev->flags) && + test_bit(R5_Expanded, &dev->flags)) + /* If we've reshaped into here, we assume it is Insync. + * We will shortly update recovery_offset to make + * it official. + */ + set_bit(R5_Insync, &dev->flags); + if (rdev && test_bit(R5_WriteError, &dev->flags)) { clear_bit(R5_Insync, &dev->flags); if (!test_bit(Faulty, &rdev->flags)) { diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 7eb1bf75cd07..5d02221e99dd 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -488,9 +488,10 @@ static int mxl5007t_write_regs(struct mxl5007t_state *state, static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val) { + u8 buf[2] = { 0xfb, reg }; struct i2c_msg msg[] = { { .addr = state->i2c_props.addr, .flags = 0, - .buf = ®, .len = 1 }, + .buf = buf, .len = 2 }, { .addr = state->i2c_props.addr, .flags = I2C_M_RD, .buf = val, .len = 1 }, }; diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c index aacfe2387e28..4fc29730a12c 100644 --- a/drivers/media/common/tuners/tda18218.c +++ b/drivers/media/common/tuners/tda18218.c @@ -141,7 +141,7 @@ static int tda18218_set_params(struct dvb_frontend *fe, switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: LP_Fc = 0; - LO_Frac = params->frequency + 4000000; + LO_Frac = params->frequency + 3000000; break; case BANDWIDTH_7_MHZ: LP_Fc = 1; diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index 303f22ea04c0..01bb8daf4b09 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -189,7 +189,7 @@ struct ati_remote { dma_addr_t inbuf_dma; dma_addr_t outbuf_dma; - unsigned char old_data[2]; /* Detect duplicate events */ + unsigned char old_data; /* Detect duplicate events */ unsigned long old_jiffies; unsigned long acc_jiffies; /* handle acceleration */ unsigned long first_jiffies; @@ -221,35 +221,35 @@ struct ati_remote { /* Translation table from hardware messages to input events. */ static const struct { short kind; - unsigned char data1, data2; + unsigned char data; int type; unsigned int code; int value; } ati_remote_tbl[] = { /* Directional control pad axes */ - {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ - {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ - {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ - {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ + {KIND_ACCEL, 0x70, EV_REL, REL_X, -1}, /* left */ + {KIND_ACCEL, 0x71, EV_REL, REL_X, 1}, /* right */ + {KIND_ACCEL, 0x72, EV_REL, REL_Y, -1}, /* up */ + {KIND_ACCEL, 0x73, EV_REL, REL_Y, 1}, /* down */ /* Directional control pad diagonals */ - {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ - {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ - {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ - {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ + {KIND_LU, 0x74, EV_REL, 0, 0}, /* left up */ + {KIND_RU, 0x75, EV_REL, 0, 0}, /* right up */ + {KIND_LD, 0x77, EV_REL, 0, 0}, /* left down */ + {KIND_RD, 0x76, EV_REL, 0, 0}, /* right down */ /* "Mouse button" buttons */ - {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ - {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ - {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ - {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ + {KIND_LITERAL, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ + {KIND_LITERAL, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ + {KIND_LITERAL, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ + {KIND_LITERAL, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ /* Artificial "doubleclick" events are generated by the hardware. * They are mapped to the "side" and "extra" mouse buttons here. */ - {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ - {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ + {KIND_FILTERED, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ + {KIND_FILTERED, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ /* Non-mouse events are handled by rc-core */ - {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} + {KIND_END, 0x00, EV_MAX + 1, 0, 0} }; /* Local function prototypes */ @@ -397,25 +397,6 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne } /* - * ati_remote_event_lookup - */ -static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) -{ - int i; - - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { - /* - * Decide if the table entry matches the remote input. - */ - if (ati_remote_tbl[i].data1 == d1 && - ati_remote_tbl[i].data2 == d2) - return i; - - } - return -1; -} - -/* * ati_remote_compute_accel * * Implements acceleration curve for directional control pad @@ -463,7 +444,15 @@ static void ati_remote_input_report(struct urb *urb) int index = -1; int acc; int remote_num; - unsigned char scancode[2]; + unsigned char scancode; + int i; + + /* + * data[0] = 0x14 + * data[1] = data[2] + data[3] + 0xd5 (a checksum byte) + * data[2] = the key code (with toggle bit in MSB with some models) + * data[3] = channel << 4 (the low 4 bits must be zero) + */ /* Deal with strange looking inputs */ if ( (urb->actual_length != 4) || (data[0] != 0x14) || @@ -472,6 +461,13 @@ static void ati_remote_input_report(struct urb *urb) return; } + if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) { + dbginfo(&ati_remote->interface->dev, + "wrong checksum in input: %02x %02x %02x %02x\n", + data[0], data[1], data[2], data[3]); + return; + } + /* Mask unwanted remote channels. */ /* note: remote_num is 0-based, channel 1 on remote == 0 here */ remote_num = (data[3] >> 4) & 0x0f; @@ -482,31 +478,30 @@ static void ati_remote_input_report(struct urb *urb) return; } - scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f)); - /* - * Some devices (e.g. SnapStream Firefly) use 8080 as toggle code, - * so we have to clear them. The first bit is a bit tricky as the - * "non-toggled" state depends on remote_num, so we xor it with the - * second bit which is only used for toggle. + * MSB is a toggle code, though only used by some devices + * (e.g. SnapStream Firefly) */ - scancode[0] ^= (data[2] & 0x80); - - scancode[1] = data[2] & ~0x80; + scancode = data[2] & 0x7f; - /* Look up event code index in mouse translation table. */ - index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]); + /* Look up event code index in the mouse translation table. */ + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { + if (scancode == ati_remote_tbl[i].data) { + index = i; + break; + } + } if (index >= 0) { dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n", - remote_num, data[1], data[2], index, ati_remote_tbl[index].code); + "channel 0x%02x; mouse data %02x; index %d; keycode %d\n", + remote_num, data[2], index, ati_remote_tbl[index].code); if (!dev) return; /* no mouse device */ } else dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n", - remote_num, data[1], data[2], scancode[0], scancode[1]); + "channel 0x%02x; key data %02x, scancode %02x\n", + remote_num, data[2], scancode); if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) { @@ -523,8 +518,7 @@ static void ati_remote_input_report(struct urb *urb) unsigned long now = jiffies; /* Filter duplicate events which happen "too close" together. */ - if (ati_remote->old_data[0] == data[1] && - ati_remote->old_data[1] == data[2] && + if (ati_remote->old_data == data[2] && time_before(now, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) { ati_remote->repeat_count++; @@ -533,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb) ati_remote->first_jiffies = now; } - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_data = data[2]; ati_remote->old_jiffies = now; /* Ensure we skip at least the 4 first duplicate events (generated @@ -549,14 +542,13 @@ static void ati_remote_input_report(struct urb *urb) if (index < 0) { /* Not a mouse event, hand it to rc-core. */ - u32 rc_code = (scancode[0] << 8) | scancode[1]; /* * We don't use the rc-core repeat handling yet as * it would cause ghost repeats which would be a * regression for this driver. */ - rc_keydown_notimeout(ati_remote->rdev, rc_code, + rc_keydown_notimeout(ati_remote->rdev, scancode, data[2]); rc_keyup(ati_remote->rdev); return; @@ -607,8 +599,7 @@ static void ati_remote_input_report(struct urb *urb) input_sync(dev); ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_data = data[2]; } } diff --git a/drivers/media/rc/keymaps/rc-ati-x10.c b/drivers/media/rc/keymaps/rc-ati-x10.c index e1b8b2605c48..81506440eded 100644 --- a/drivers/media/rc/keymaps/rc-ati-x10.c +++ b/drivers/media/rc/keymaps/rc-ati-x10.c @@ -27,55 +27,55 @@ #include <media/rc-map.h> static struct rc_map_table ati_x10[] = { - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xc500, KEY_A }, - { 0xc601, KEY_B }, - { 0xde19, KEY_C }, - { 0xe01b, KEY_D }, - { 0xe621, KEY_E }, - { 0xe823, KEY_F }, + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x00, KEY_A }, + { 0x01, KEY_B }, + { 0x19, KEY_C }, + { 0x1b, KEY_D }, + { 0x21, KEY_E }, + { 0x23, KEY_F }, - { 0xdd18, KEY_KPENTER }, /* "check" */ - { 0xdb16, KEY_MENU }, /* "menu" */ - { 0xc702, KEY_POWER }, /* Power */ - { 0xc803, KEY_TV }, /* TV */ - { 0xc904, KEY_DVD }, /* DVD */ - { 0xca05, KEY_WWW }, /* WEB */ - { 0xcb06, KEY_BOOKMARKS }, /* "book" */ - { 0xcc07, KEY_EDIT }, /* "hand" */ - { 0xe11c, KEY_COFFEE }, /* "timer" */ - { 0xe520, KEY_FRONT }, /* "max" */ - { 0xe21d, KEY_LEFT }, /* left */ - { 0xe41f, KEY_RIGHT }, /* right */ - { 0xe722, KEY_DOWN }, /* down */ - { 0xdf1a, KEY_UP }, /* up */ - { 0xe31e, KEY_OK }, /* "OK" */ - { 0xce09, KEY_VOLUMEDOWN }, /* VOL + */ - { 0xcd08, KEY_VOLUMEUP }, /* VOL - */ - { 0xcf0a, KEY_MUTE }, /* MUTE */ - { 0xd00b, KEY_CHANNELUP }, /* CH + */ - { 0xd10c, KEY_CHANNELDOWN },/* CH - */ - { 0xec27, KEY_RECORD }, /* ( o) red */ - { 0xea25, KEY_PLAY }, /* ( >) */ - { 0xe924, KEY_REWIND }, /* (<<) */ - { 0xeb26, KEY_FORWARD }, /* (>>) */ - { 0xed28, KEY_STOP }, /* ([]) */ - { 0xee29, KEY_PAUSE }, /* ('') */ - { 0xf02b, KEY_PREVIOUS }, /* (<-) */ - { 0xef2a, KEY_NEXT }, /* (>+) */ - { 0xf22d, KEY_INFO }, /* PLAYING */ - { 0xf32e, KEY_HOME }, /* TOP */ - { 0xf42f, KEY_END }, /* END */ - { 0xf530, KEY_SELECT }, /* SELECT */ + { 0x18, KEY_KPENTER }, /* "check" */ + { 0x16, KEY_MENU }, /* "menu" */ + { 0x02, KEY_POWER }, /* Power */ + { 0x03, KEY_TV }, /* TV */ + { 0x04, KEY_DVD }, /* DVD */ + { 0x05, KEY_WWW }, /* WEB */ + { 0x06, KEY_BOOKMARKS }, /* "book" */ + { 0x07, KEY_EDIT }, /* "hand" */ + { 0x1c, KEY_COFFEE }, /* "timer" */ + { 0x20, KEY_FRONT }, /* "max" */ + { 0x1d, KEY_LEFT }, /* left */ + { 0x1f, KEY_RIGHT }, /* right */ + { 0x22, KEY_DOWN }, /* down */ + { 0x1a, KEY_UP }, /* up */ + { 0x1e, KEY_OK }, /* "OK" */ + { 0x09, KEY_VOLUMEDOWN }, /* VOL + */ + { 0x08, KEY_VOLUMEUP }, /* VOL - */ + { 0x0a, KEY_MUTE }, /* MUTE */ + { 0x0b, KEY_CHANNELUP }, /* CH + */ + { 0x0c, KEY_CHANNELDOWN },/* CH - */ + { 0x27, KEY_RECORD }, /* ( o) red */ + { 0x25, KEY_PLAY }, /* ( >) */ + { 0x24, KEY_REWIND }, /* (<<) */ + { 0x26, KEY_FORWARD }, /* (>>) */ + { 0x28, KEY_STOP }, /* ([]) */ + { 0x29, KEY_PAUSE }, /* ('') */ + { 0x2b, KEY_PREVIOUS }, /* (<-) */ + { 0x2a, KEY_NEXT }, /* (>+) */ + { 0x2d, KEY_INFO }, /* PLAYING */ + { 0x2e, KEY_HOME }, /* TOP */ + { 0x2f, KEY_END }, /* END */ + { 0x30, KEY_SELECT }, /* SELECT */ }; static struct rc_map_list ati_x10_map = { diff --git a/drivers/media/rc/keymaps/rc-medion-x10.c b/drivers/media/rc/keymaps/rc-medion-x10.c index 09e2cc01d110..479cdb897810 100644 --- a/drivers/media/rc/keymaps/rc-medion-x10.c +++ b/drivers/media/rc/keymaps/rc-medion-x10.c @@ -25,70 +25,70 @@ #include <media/rc-map.h> static struct rc_map_table medion_x10[] = { - { 0xf12c, KEY_TV }, /* TV */ - { 0xf22d, KEY_VCR }, /* VCR */ - { 0xc904, KEY_DVD }, /* DVD */ - { 0xcb06, KEY_AUDIO }, /* MUSIC */ - - { 0xf32e, KEY_RADIO }, /* RADIO */ - { 0xca05, KEY_DIRECTORY }, /* PHOTO */ - { 0xf42f, KEY_INFO }, /* TV-PREVIEW */ - { 0xf530, KEY_LIST }, /* CHANNEL-LST */ - - { 0xe01b, KEY_SETUP }, /* SETUP */ - { 0xf631, KEY_VIDEO }, /* VIDEO DESKTOP */ - - { 0xcd08, KEY_VOLUMEDOWN }, /* VOL - */ - { 0xce09, KEY_VOLUMEUP }, /* VOL + */ - { 0xd00b, KEY_CHANNELUP }, /* CHAN + */ - { 0xd10c, KEY_CHANNELDOWN }, /* CHAN - */ - { 0xc500, KEY_MUTE }, /* MUTE */ - - { 0xf732, KEY_RED }, /* red */ - { 0xf833, KEY_GREEN }, /* green */ - { 0xf934, KEY_YELLOW }, /* yellow */ - { 0xfa35, KEY_BLUE }, /* blue */ - { 0xdb16, KEY_TEXT }, /* TXT */ - - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xe11c, KEY_SEARCH }, /* TV/RAD, CH SRC */ - { 0xe520, KEY_DELETE }, /* DELETE */ - - { 0xfb36, KEY_KEYBOARD }, /* RENAME */ - { 0xdd18, KEY_SCREEN }, /* SNAPSHOT */ - - { 0xdf1a, KEY_UP }, /* up */ - { 0xe722, KEY_DOWN }, /* down */ - { 0xe21d, KEY_LEFT }, /* left */ - { 0xe41f, KEY_RIGHT }, /* right */ - { 0xe31e, KEY_OK }, /* OK */ - - { 0xfc37, KEY_SELECT }, /* ACQUIRE IMAGE */ - { 0xfd38, KEY_EDIT }, /* EDIT IMAGE */ - - { 0xe924, KEY_REWIND }, /* rewind (<<) */ - { 0xea25, KEY_PLAY }, /* play ( >) */ - { 0xeb26, KEY_FORWARD }, /* forward (>>) */ - { 0xec27, KEY_RECORD }, /* record ( o) */ - { 0xed28, KEY_STOP }, /* stop ([]) */ - { 0xee29, KEY_PAUSE }, /* pause ('') */ - - { 0xe621, KEY_PREVIOUS }, /* prev */ - { 0xfe39, KEY_SWITCHVIDEOMODE }, /* F SCR */ - { 0xe823, KEY_NEXT }, /* next */ - { 0xde19, KEY_MENU }, /* MENU */ - { 0xff3a, KEY_LANGUAGE }, /* AUDIO */ - - { 0xc702, KEY_POWER }, /* POWER */ + { 0x2c, KEY_TV }, /* TV */ + { 0x2d, KEY_VCR }, /* VCR */ + { 0x04, KEY_DVD }, /* DVD */ + { 0x06, KEY_AUDIO }, /* MUSIC */ + + { 0x2e, KEY_RADIO }, /* RADIO */ + { 0x05, KEY_DIRECTORY }, /* PHOTO */ + { 0x2f, KEY_INFO }, /* TV-PREVIEW */ + { 0x30, KEY_LIST }, /* CHANNEL-LST */ + + { 0x1b, KEY_SETUP }, /* SETUP */ + { 0x31, KEY_VIDEO }, /* VIDEO DESKTOP */ + + { 0x08, KEY_VOLUMEDOWN }, /* VOL - */ + { 0x09, KEY_VOLUMEUP }, /* VOL + */ + { 0x0b, KEY_CHANNELUP }, /* CHAN + */ + { 0x0c, KEY_CHANNELDOWN }, /* CHAN - */ + { 0x00, KEY_MUTE }, /* MUTE */ + + { 0x32, KEY_RED }, /* red */ + { 0x33, KEY_GREEN }, /* green */ + { 0x34, KEY_YELLOW }, /* yellow */ + { 0x35, KEY_BLUE }, /* blue */ + { 0x16, KEY_TEXT }, /* TXT */ + + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x1c, KEY_SEARCH }, /* TV/RAD, CH SRC */ + { 0x20, KEY_DELETE }, /* DELETE */ + + { 0x36, KEY_KEYBOARD }, /* RENAME */ + { 0x18, KEY_SCREEN }, /* SNAPSHOT */ + + { 0x1a, KEY_UP }, /* up */ + { 0x22, KEY_DOWN }, /* down */ + { 0x1d, KEY_LEFT }, /* left */ + { 0x1f, KEY_RIGHT }, /* right */ + { 0x1e, KEY_OK }, /* OK */ + + { 0x37, KEY_SELECT }, /* ACQUIRE IMAGE */ + { 0x38, KEY_EDIT }, /* EDIT IMAGE */ + + { 0x24, KEY_REWIND }, /* rewind (<<) */ + { 0x25, KEY_PLAY }, /* play ( >) */ + { 0x26, KEY_FORWARD }, /* forward (>>) */ + { 0x27, KEY_RECORD }, /* record ( o) */ + { 0x28, KEY_STOP }, /* stop ([]) */ + { 0x29, KEY_PAUSE }, /* pause ('') */ + + { 0x21, KEY_PREVIOUS }, /* prev */ + { 0x39, KEY_SWITCHVIDEOMODE }, /* F SCR */ + { 0x23, KEY_NEXT }, /* next */ + { 0x19, KEY_MENU }, /* MENU */ + { 0x3a, KEY_LANGUAGE }, /* AUDIO */ + + { 0x02, KEY_POWER }, /* POWER */ }; static struct rc_map_list medion_x10_map = { diff --git a/drivers/media/rc/keymaps/rc-snapstream-firefly.c b/drivers/media/rc/keymaps/rc-snapstream-firefly.c index ef146520931c..c7f33ec719b4 100644 --- a/drivers/media/rc/keymaps/rc-snapstream-firefly.c +++ b/drivers/media/rc/keymaps/rc-snapstream-firefly.c @@ -22,63 +22,63 @@ #include <media/rc-map.h> static struct rc_map_table snapstream_firefly[] = { - { 0xf12c, KEY_ZOOM }, /* Maximize */ - { 0xc702, KEY_CLOSE }, - - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xdb16, KEY_BACK }, - { 0xdd18, KEY_KPENTER }, /* ent */ - - { 0xce09, KEY_VOLUMEUP }, - { 0xcd08, KEY_VOLUMEDOWN }, - { 0xcf0a, KEY_MUTE }, - { 0xd00b, KEY_CHANNELUP }, - { 0xd10c, KEY_CHANNELDOWN }, - { 0xc500, KEY_VENDOR }, /* firefly */ - - { 0xf32e, KEY_INFO }, - { 0xf42f, KEY_OPTION }, - - { 0xe21d, KEY_LEFT }, - { 0xe41f, KEY_RIGHT }, - { 0xe722, KEY_DOWN }, - { 0xdf1a, KEY_UP }, - { 0xe31e, KEY_OK }, - - { 0xe11c, KEY_MENU }, - { 0xe520, KEY_EXIT }, - - { 0xec27, KEY_RECORD }, - { 0xea25, KEY_PLAY }, - { 0xed28, KEY_STOP }, - { 0xe924, KEY_REWIND }, - { 0xeb26, KEY_FORWARD }, - { 0xee29, KEY_PAUSE }, - { 0xf02b, KEY_PREVIOUS }, - { 0xef2a, KEY_NEXT }, - - { 0xcb06, KEY_AUDIO }, /* Music */ - { 0xca05, KEY_IMAGES }, /* Photos */ - { 0xc904, KEY_DVD }, - { 0xc803, KEY_TV }, - { 0xcc07, KEY_VIDEO }, - - { 0xc601, KEY_HELP }, - { 0xf22d, KEY_MODE }, /* Mouse */ - - { 0xde19, KEY_A }, - { 0xe01b, KEY_B }, - { 0xe621, KEY_C }, - { 0xe823, KEY_D }, + { 0x2c, KEY_ZOOM }, /* Maximize */ + { 0x02, KEY_CLOSE }, + + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x16, KEY_BACK }, + { 0x18, KEY_KPENTER }, /* ent */ + + { 0x09, KEY_VOLUMEUP }, + { 0x08, KEY_VOLUMEDOWN }, + { 0x0a, KEY_MUTE }, + { 0x0b, KEY_CHANNELUP }, + { 0x0c, KEY_CHANNELDOWN }, + { 0x00, KEY_VENDOR }, /* firefly */ + + { 0x2e, KEY_INFO }, + { 0x2f, KEY_OPTION }, + + { 0x1d, KEY_LEFT }, + { 0x1f, KEY_RIGHT }, + { 0x22, KEY_DOWN }, + { 0x1a, KEY_UP }, + { 0x1e, KEY_OK }, + + { 0x1c, KEY_MENU }, + { 0x20, KEY_EXIT }, + + { 0x27, KEY_RECORD }, + { 0x25, KEY_PLAY }, + { 0x28, KEY_STOP }, + { 0x24, KEY_REWIND }, + { 0x26, KEY_FORWARD }, + { 0x29, KEY_PAUSE }, + { 0x2b, KEY_PREVIOUS }, + { 0x2a, KEY_NEXT }, + + { 0x06, KEY_AUDIO }, /* Music */ + { 0x05, KEY_IMAGES }, /* Photos */ + { 0x04, KEY_DVD }, + { 0x03, KEY_TV }, + { 0x07, KEY_VIDEO }, + + { 0x01, KEY_HELP }, + { 0x2d, KEY_MODE }, /* Mouse */ + + { 0x19, KEY_A }, + { 0x1b, KEY_B }, + { 0x21, KEY_C }, + { 0x23, KEY_D }, }; static struct rc_map_list snapstream_firefly_map = { diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 39fc923fc46b..1c6015a04f96 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -162,11 +162,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) switch (tv.model) { case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */ case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */ case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72261: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; @@ -324,6 +327,10 @@ struct usb_device_id au0828_usb_id_table[] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x8200), .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, + { USB_DEVICE(0x2040, 0x7260), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7213), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { }, }; diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index 10550bd93b06..25036cb11bea 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -20,6 +20,7 @@ #include <linux/videodev2.h> #include <mach/hardware.h> #include <mach/dm646x.h> +#include <media/davinci/vpif_types.h> /* Maximum channel allowed */ #define VPIF_NUM_CHANNELS (4) diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 064550f5ce4a..a693d4ebda55 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -27,7 +27,7 @@ #include <media/v4l2-device.h> #include <media/videobuf-core.h> #include <media/videobuf-dma-contig.h> -#include <mach/dm646x.h> +#include <media/davinci/vpif_types.h> #include "vpif.h" diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index 5d1936dafed2..56879d1a0684 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -22,6 +22,7 @@ #include <media/v4l2-device.h> #include <media/videobuf-core.h> #include <media/videobuf-dma-contig.h> +#include <media/davinci/vpif_types.h> #include "vpif.h" diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 881e04c7ffe6..2ca10dfec91f 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -838,13 +838,13 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->usb_err = 0; /* do the specific subdriver stuff before endpoint selection */ - gspca_dev->alt = 0; + intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); + gspca_dev->alt = gspca_dev->cam.bulk ? intf->num_altsetting : 0; if (gspca_dev->sd_desc->isoc_init) { ret = gspca_dev->sd_desc->isoc_init(gspca_dev); if (ret < 0) goto unlock; } - intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK : USB_ENDPOINT_XFER_ISOC; @@ -957,7 +957,7 @@ retry: ret = -EIO; goto out; } - alt = ep_tb[--alt_idx].alt; + gspca_dev->alt = ep_tb[--alt_idx].alt; } } out: diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 89d09a8914f8..82c8817bd32d 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -162,7 +162,6 @@ struct m5mols_version { * @pad: media pad * @ffmt: current fmt according to resolution type * @res_type: current resolution type - * @code: current code * @irq_waitq: waitqueue for the capture * @work_irq: workqueue for the IRQ * @flags: state variable for the interrupt handler @@ -192,7 +191,6 @@ struct m5mols_info { struct media_pad pad; struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; int res_type; - enum v4l2_mbus_pixelcode code; wait_queue_head_t irq_waitq; struct work_struct work_irq; unsigned long flags; diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 05ab3700647e..e0f09e531800 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -334,7 +334,7 @@ int m5mols_mode(struct m5mols_info *info, u8 mode) int ret = -EINVAL; u8 reg; - if (mode < REG_PARAMETER && mode > REG_CAPTURE) + if (mode < REG_PARAMETER || mode > REG_CAPTURE) return ret; ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); @@ -511,9 +511,6 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct m5mols_info *info = to_m5mols(sd); struct v4l2_mbus_framefmt *format; - if (fmt->pad != 0) - return -EINVAL; - format = __find_format(info, fh, fmt->which, info->res_type); if (!format) return -EINVAL; @@ -532,9 +529,6 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, u32 resolution = 0; int ret; - if (fmt->pad != 0) - return -EINVAL; - ret = __find_resolution(sd, format, &type, &resolution); if (ret < 0) return ret; @@ -543,13 +537,14 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, if (!sfmt) return 0; - *sfmt = m5mols_default_ffmt[type]; - sfmt->width = format->width; - sfmt->height = format->height; + + format->code = m5mols_default_ffmt[type].code; + format->colorspace = V4L2_COLORSPACE_JPEG; + format->field = V4L2_FIELD_NONE; if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + *sfmt = *format; info->resolution = resolution; - info->code = format->code; info->res_type = type; } @@ -626,13 +621,14 @@ static int m5mols_start_monitor(struct m5mols_info *info) static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) { struct m5mols_info *info = to_m5mols(sd); + u32 code = info->ffmt[info->res_type].code; if (enable) { int ret = -EINVAL; - if (is_code(info->code, M5MOLS_RESTYPE_MONITOR)) + if (is_code(code, M5MOLS_RESTYPE_MONITOR)) ret = m5mols_start_monitor(info); - if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE)) + if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) ret = m5mols_start_capture(info); return ret; diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index cf2c0fb95f2f..398f96ffd35e 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -955,6 +955,7 @@ static int mt9m111_probe(struct i2c_client *client, mt9m111->rect.height = MT9M111_MAX_HEIGHT; mt9m111->fmt = &mt9m111_colour_fmts[0]; mt9m111->lastpage = -1; + mutex_init(&mt9m111->power_lock); ret = mt9m111_video_probe(client); if (ret) { diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index 32114a3c0ca7..7b34b11daf24 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -1083,8 +1083,10 @@ static int mt9t112_probe(struct i2c_client *client, v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); ret = mt9t112_camera_probe(client); - if (ret) + if (ret) { kfree(priv); + return ret; + } /* Cannot fail: using the default supported pixel code */ mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8); diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 9c5c19f142de..ee0d0b39cd17 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -38,6 +38,7 @@ #include <linux/irq.h> #include <linux/videodev2.h> #include <linux/dma-mapping.h> +#include <linux/slab.h> #include <media/videobuf-dma-contig.h> #include <media/v4l2-device.h> @@ -2169,6 +2170,14 @@ static int __init omap_vout_probe(struct platform_device *pdev) vid_dev->num_displays = 0; for_each_dss_dev(dssdev) { omap_dss_get_device(dssdev); + + if (!dssdev->driver) { + dev_warn(&pdev->dev, "no driver for display: %s\n", + dssdev->name); + omap_dss_put_device(dssdev); + continue; + } + vid_dev->displays[vid_dev->num_displays++] = dssdev; } diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index e87ae2f634b2..6a6cf388bae4 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -24,6 +24,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> diff --git a/drivers/media/video/omap24xxcam-dma.c b/drivers/media/video/omap24xxcam-dma.c index 1d54b86c936b..3ea38a8def8e 100644 --- a/drivers/media/video/omap24xxcam-dma.c +++ b/drivers/media/video/omap24xxcam-dma.c @@ -506,7 +506,7 @@ int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma, unsigned long flags; struct sgdma_state *sg_state; - if ((sglen < 0) || ((sglen > 0) & !sglist)) + if ((sglen < 0) || ((sglen > 0) && !sglist)) return -EINVAL; spin_lock_irqsave(&sgdma->lock, flags); diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index b0b0fa5a3572..54a4a3f22e2e 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -1408,7 +1408,7 @@ static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc) { struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->video_out.video.entity); - struct video_device *vdev = &ccdc->subdev.devnode; + struct video_device *vdev = ccdc->subdev.devnode; struct v4l2_event event; memset(&event, 0, sizeof(event)); diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c index 68d539456c55..bc0b2c7349b9 100644 --- a/drivers/media/video/omap3isp/ispstat.c +++ b/drivers/media/video/omap3isp/ispstat.c @@ -496,7 +496,7 @@ static int isp_stat_bufs_alloc(struct ispstat *stat, u32 size) static void isp_stat_queue_event(struct ispstat *stat, int err) { - struct video_device *vdev = &stat->subdev.devnode; + struct video_device *vdev = stat->subdev.devnode; struct v4l2_event event; struct omap3isp_stat_event_status *status = (void *)event.u.data; diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index d1000723c5ae..f2290578448c 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -26,6 +26,7 @@ #include <asm/cacheflush.h> #include <linux/clk.h> #include <linux/mm.h> +#include <linux/module.h> #include <linux/pagemap.h> #include <linux/scatterlist.h> #include <linux/sched.h> diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index 9f2d26b1d4cb..6806345ec2f0 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -540,7 +540,7 @@ static u8 to_clkrc(struct v4l2_fract *timeperframe, static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); struct soc_camera_sense *sense = icd->sense; struct ov6650 *priv = to_ov6650(client); bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect); diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index c8d91b0cd9bd..2cc3b9166724 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -98,6 +98,10 @@ static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend) vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); } set_bit(ST_CAPT_SUSPENDED, &fimc->state); + + fimc_hw_reset(fimc); + cap->buf_index = 0; + spin_unlock_irqrestore(&fimc->slock, flags); if (streaming) @@ -137,7 +141,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx) struct fimc_dev *fimc = ctx->fimc_dev; int ret; - if (test_bit(ST_CAPT_APPLY_CFG, &fimc->state)) + if (!test_bit(ST_CAPT_APPLY_CFG, &fimc->state)) return 0; spin_lock(&ctx->slock); @@ -150,7 +154,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx) fimc_hw_set_rotation(ctx); fimc_prepare_dma_offset(ctx, &ctx->d_frame); fimc_hw_set_out_dma(ctx); - set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + clear_bit(ST_CAPT_APPLY_CFG, &fimc->state); } spin_unlock(&ctx->slock); return ret; @@ -164,7 +168,6 @@ static int start_streaming(struct vb2_queue *q, unsigned int count) int min_bufs; int ret; - fimc_hw_reset(fimc); vid_cap->frame_count = 0; ret = fimc_init_capture(fimc); @@ -523,7 +526,7 @@ static struct fimc_fmt *fimc_capture_try_format(struct fimc_ctx *ctx, max_w = rotation ? pl->out_rot_en_w : pl->out_rot_dis_w; min_w = ctx->state & FIMC_DST_CROP ? dst->width : var->min_out_pixsize; min_h = ctx->state & FIMC_DST_CROP ? dst->height : var->min_out_pixsize; - if (fimc->id == 1 && var->pix_hoff) + if (var->min_vsize_align == 1 && !rotation) align_h = fimc_fmt_is_rgb(ffmt->color) ? 0 : 1; depth = fimc_get_format_depth(ffmt); @@ -1239,6 +1242,7 @@ static int fimc_subdev_set_fmt(struct v4l2_subdev *sd, mutex_lock(&fimc->lock); set_frame_bounds(ff, mf->width, mf->height); + fimc->vid_cap.mf = *mf; ff->fmt = ffmt; /* Reset the crop rectangle if required. */ @@ -1375,7 +1379,7 @@ static void fimc_destroy_capture_subdev(struct fimc_dev *fimc) media_entity_cleanup(&sd->entity); v4l2_device_unregister_subdev(sd); kfree(sd); - sd = NULL; + fimc->vid_cap.subdev = NULL; } /* Set default format at the sensor and host interface */ diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 19ca6db38b2f..07c6254faee3 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -37,7 +37,7 @@ static char *fimc_clocks[MAX_FIMC_CLOCKS] = { static struct fimc_fmt fimc_formats[] = { { .name = "RGB565", - .fourcc = V4L2_PIX_FMT_RGB565X, + .fourcc = V4L2_PIX_FMT_RGB565, .depth = { 16 }, .color = S5P_FIMC_RGB565, .memplanes = 1, @@ -1038,12 +1038,11 @@ static int fimc_try_fmt_mplane(struct fimc_ctx *ctx, struct v4l2_format *f) mod_x = 6; /* 64 x 32 pixels tile */ mod_y = 5; } else { - if (fimc->id == 1 && variant->pix_hoff) + if (variant->min_vsize_align == 1) mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1; else - mod_y = mod_x; + mod_y = ffs(variant->min_vsize_align) - 1; } - dbg("mod_x: %d, mod_y: %d, max_w: %d", mod_x, mod_y, max_w); v4l_bound_align_image(&pix->width, 16, max_w, mod_x, &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0); @@ -1226,10 +1225,10 @@ static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize; /* Get pixel alignment constraints. */ - if (fimc->id == 1 && fimc->variant->pix_hoff) + if (fimc->variant->min_vsize_align == 1) halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1; else - halign = ffs(min_size) - 1; + halign = ffs(fimc->variant->min_vsize_align) - 1; for (i = 0; i < f->fmt->colplanes; i++) depth += f->fmt->depth[i]; @@ -1615,7 +1614,6 @@ static int fimc_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; fimc->pdata = pdata; - set_bit(ST_LPM, &fimc->state); init_waitqueue_head(&fimc->irq_queue); spin_lock_init(&fimc->slock); @@ -1707,8 +1705,6 @@ static int fimc_runtime_resume(struct device *dev) /* Enable clocks and perform basic initalization */ clk_enable(fimc->clock[CLK_GATE]); fimc_hw_reset(fimc); - if (fimc->variant->out_buf_count > 4) - fimc_hw_set_dma_seq(fimc, 0xF); /* Resume the capture or mem-to-mem device */ if (fimc_capture_busy(fimc)) @@ -1750,8 +1746,6 @@ static int fimc_resume(struct device *dev) return 0; } fimc_hw_reset(fimc); - if (fimc->variant->out_buf_count > 4) - fimc_hw_set_dma_seq(fimc, 0xF); spin_unlock_irqrestore(&fimc->slock, flags); if (fimc_capture_busy(fimc)) @@ -1780,7 +1774,6 @@ static int __devexit fimc_remove(struct platform_device *pdev) struct fimc_dev *fimc = platform_get_drvdata(pdev); pm_runtime_disable(&pdev->dev); - fimc_runtime_suspend(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); @@ -1840,6 +1833,7 @@ static struct samsung_fimc_variant fimc0_variant_s5p = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[0], }; @@ -1849,6 +1843,7 @@ static struct samsung_fimc_variant fimc2_variant_s5p = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[1], }; @@ -1861,6 +1856,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[1], }; @@ -1874,6 +1870,7 @@ static struct samsung_fimc_variant fimc1_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 1, + .min_vsize_align = 1, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[2], }; @@ -1884,6 +1881,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[2], }; @@ -1898,6 +1896,7 @@ static struct samsung_fimc_variant fimc0_variant_exynos4 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 2, + .min_vsize_align = 1, .out_buf_count = 32, .pix_limit = &s5p_pix_limit[1], }; @@ -1910,6 +1909,7 @@ static struct samsung_fimc_variant fimc3_variant_exynos4 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 2, + .min_vsize_align = 1, .out_buf_count = 32, .pix_limit = &s5p_pix_limit[3], }; diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index a6936dad5b10..c7f01c47b20f 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -377,6 +377,7 @@ struct fimc_pix_limit { * @min_inp_pixsize: minimum input pixel size * @min_out_pixsize: minimum output pixel size * @hor_offs_align: horizontal pixel offset aligment + * @min_vsize_align: minimum vertical pixel size alignment * @out_buf_count: the number of buffers in output DMA sequence */ struct samsung_fimc_variant { @@ -390,6 +391,7 @@ struct samsung_fimc_variant { u16 min_inp_pixsize; u16 min_out_pixsize; u16 hor_offs_align; + u16 min_vsize_align; u16 out_buf_count; }; diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index cc337b1de913..615c862f0360 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -220,6 +220,7 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter, s_info->pdata->board_info, NULL); if (IS_ERR_OR_NULL(sd)) { + i2c_put_adapter(adapter); v4l2_err(&fmd->v4l2_dev, "Failed to acquire subdev\n"); return NULL; } @@ -234,12 +235,15 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, static void fimc_md_unregister_sensor(struct v4l2_subdev *sd) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adapter; if (!client) return; v4l2_device_unregister_subdev(sd); + adapter = client->adapter; i2c_unregister_device(client); - i2c_put_adapter(client->adapter); + if (adapter) + i2c_put_adapter(adapter); } static int fimc_md_register_sensor_entities(struct fimc_md *fmd) @@ -381,20 +385,28 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd) static int fimc_md_register_video_nodes(struct fimc_md *fmd) { + struct video_device *vdev; int i, ret = 0; for (i = 0; i < FIMC_MAX_DEVS && !ret; i++) { if (!fmd->fimc[i]) continue; - if (fmd->fimc[i]->m2m.vfd) - ret = video_register_device(fmd->fimc[i]->m2m.vfd, - VFL_TYPE_GRABBER, -1); - if (ret) - break; - if (fmd->fimc[i]->vid_cap.vfd) - ret = video_register_device(fmd->fimc[i]->vid_cap.vfd, - VFL_TYPE_GRABBER, -1); + vdev = fmd->fimc[i]->m2m.vfd; + if (vdev) { + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret) + break; + v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n", + vdev->name, video_device_node_name(vdev)); + } + + vdev = fmd->fimc[i]->vid_cap.vfd; + if (vdev == NULL) + continue; + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n", + vdev->name, video_device_node_name(vdev)); } return ret; @@ -502,7 +514,7 @@ static int fimc_md_create_links(struct fimc_md *fmd) if (WARN(csis == NULL, "MIPI-CSI interface specified " "but s5p-csis module is not loaded!\n")) - continue; + return -EINVAL; ret = media_entity_create_link(&sensor->entity, 0, &csis->entity, CSIS_PAD_SINK, @@ -742,9 +754,6 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) struct fimc_md *fmd; int ret; - if (WARN(!pdev->dev.platform_data, "Platform data not specified!\n")) - return -EINVAL; - fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL); if (!fmd) return -ENOMEM; @@ -782,9 +791,11 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) if (ret) goto err3; - ret = fimc_md_register_sensor_entities(fmd); - if (ret) - goto err3; + if (pdev->dev.platform_data) { + ret = fimc_md_register_sensor_entities(fmd); + if (ret) + goto err3; + } ret = fimc_md_create_links(fmd); if (ret) goto err3; diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c index 20e664e34163..44f5c2d1920b 100644 --- a/drivers/media/video/s5p-fimc/fimc-reg.c +++ b/drivers/media/video/s5p-fimc/fimc-reg.c @@ -35,6 +35,9 @@ void fimc_hw_reset(struct fimc_dev *dev) cfg = readl(dev->regs + S5P_CIGCTRL); cfg &= ~S5P_CIGCTRL_SWRST; writel(cfg, dev->regs + S5P_CIGCTRL); + + if (dev->variant->out_buf_count > 4) + fimc_hw_set_dma_seq(dev, 0xF); } static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx) @@ -251,7 +254,14 @@ static void fimc_hw_set_scaler(struct fimc_ctx *ctx) struct fimc_scaler *sc = &ctx->scaler; struct fimc_frame *src_frame = &ctx->s_frame; struct fimc_frame *dst_frame = &ctx->d_frame; - u32 cfg = 0; + + u32 cfg = readl(dev->regs + S5P_CISCCTRL); + + cfg &= ~(S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE | + S5P_CISCCTRL_SCALEUP_H | S5P_CISCCTRL_SCALEUP_V | + S5P_CISCCTRL_SCALERBYPASS | S5P_CISCCTRL_ONE2ONE | + S5P_CISCCTRL_INRGB_FMT_MASK | S5P_CISCCTRL_OUTRGB_FMT_MASK | + S5P_CISCCTRL_INTERLACE | S5P_CISCCTRL_RGB_EXT); if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW)) cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE); @@ -308,9 +318,9 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) fimc_hw_set_scaler(ctx); cfg = readl(dev->regs + S5P_CISCCTRL); + cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); if (variant->has_mainscaler_ext) { - cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); cfg |= S5P_CISCCTRL_MHRATIO_EXT(sc->main_hratio); cfg |= S5P_CISCCTRL_MVRATIO_EXT(sc->main_vratio); writel(cfg, dev->regs + S5P_CISCCTRL); @@ -323,7 +333,6 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) cfg |= S5P_CIEXTEN_MVRATIO_EXT(sc->main_vratio); writel(cfg, dev->regs + S5P_CIEXTEN); } else { - cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); cfg |= S5P_CISCCTRL_MHRATIO(sc->main_hratio); cfg |= S5P_CISCCTRL_MVRATIO(sc->main_vratio); writel(cfg, dev->regs + S5P_CISCCTRL); diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index 1e8cdb77d4b8..dff9dc798795 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -61,7 +61,7 @@ static struct s5p_mfc_fmt formats[] = { .num_planes = 1, }, { - .name = "H264 Encoded Stream", + .name = "H263 Encoded Stream", .fourcc = V4L2_PIX_FMT_H263, .codec_mode = S5P_FIMV_CODEC_H263_ENC, .type = MFC_FMT_ENC, diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c index e16d3a4bc1dc..b47d0c06ecf5 100644 --- a/drivers/media/video/s5p-tv/mixer_video.c +++ b/drivers/media/video/s5p-tv/mixer_video.c @@ -16,6 +16,7 @@ #include <media/v4l2-ioctl.h> #include <linux/videodev2.h> #include <linux/mm.h> +#include <linux/module.h> #include <linux/version.h> #include <linux/timer.h> #include <media/videobuf2-dma-contig.h> diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f390682629cf..c51decfcae19 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -566,8 +566,10 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) ret = sh_mobile_ceu_soft_reset(pcdev); csi2_sd = find_csi2(pcdev); - if (csi2_sd) - csi2_sd->grp_id = (long)icd; + if (csi2_sd) { + csi2_sd->grp_id = soc_camera_grp_id(icd); + v4l2_set_subdev_hostdata(csi2_sd, icd); + } ret = v4l2_subdev_call(csi2_sd, core, s_power, 1); if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) { @@ -768,7 +770,7 @@ static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev, { if (pcdev->csi2_pdev) { struct v4l2_subdev *csi2_sd = find_csi2(pcdev); - if (csi2_sd && csi2_sd->grp_id == (u32)icd) + if (csi2_sd && csi2_sd->grp_id == soc_camera_grp_id(icd)) return csi2_sd; } @@ -1089,8 +1091,9 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - s_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, &mf); if (ret < 0) return ret; shift++; @@ -1389,7 +1392,8 @@ static int client_s_fmt(struct soc_camera_device *icd, bool ceu_1to1; int ret; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, s_mbus_fmt, mf); if (ret < 0) return ret; @@ -1426,8 +1430,9 @@ static int client_s_fmt(struct soc_camera_device *icd, tmp_h = min(2 * tmp_h, max_height); mf->width = tmp_w; mf->height = tmp_h; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - s_mbus_fmt, mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, mf); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); if (ret < 0) { @@ -1580,8 +1585,9 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, } if (interm_width < icd->user_width || interm_height < icd->user_height) { - ret = v4l2_device_call_until_err(sd->v4l2_dev, (int)icd, video, - s_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1867,7 +1873,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, mf.code = xlate->code; mf.colorspace = pix->colorspace; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), + video, try_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1891,8 +1898,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, */ mf.width = 2560; mf.height = 1920; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ dev_err(icd->parent, diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index ea4f0473ed3b..8a652b53ff7e 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -143,7 +143,7 @@ static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd, const struct v4l2_mbus_config *cfg) { struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd); struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2, .flags = priv->mipi_flags}; @@ -202,7 +202,7 @@ static void sh_csi2_hwinit(struct sh_csi2 *priv) static int sh_csi2_client_connect(struct sh_csi2 *priv) { struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; - struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(&priv->subdev); struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd); struct device *dev = v4l2_get_subdevdata(&priv->subdev); struct v4l2_mbus_config cfg; diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b72580c38957..62e4312515cb 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1103,7 +1103,8 @@ static int soc_camera_probe(struct soc_camera_device *icd) } sd = soc_camera_to_subdev(icd); - sd->grp_id = (long)icd; + sd->grp_id = soc_camera_grp_id(icd); + v4l2_set_subdev_hostdata(sd, icd); if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler)) goto ectrl; diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 43c0ebb81956..b7b2d3483fd4 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,7 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ -#include <linux/export.h> +#include <linux/module.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/mfd/ab5500/ab5500.h> diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1e9173804ede..d3d572b2317b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -620,6 +620,7 @@ static struct resource __devinitdata ab8500_fg_resources[] = { static struct resource __devinitdata ab8500_chargalg_resources[] = {}; +#ifdef CONFIG_DEBUG_FS static struct resource __devinitdata ab8500_debug_resources[] = { { .name = "IRQ_FIRST", @@ -634,6 +635,7 @@ static struct resource __devinitdata ab8500_debug_resources[] = { .flags = IORESOURCE_IRQ, }, }; +#endif static struct resource __devinitdata ab8500_usb_resources[] = { { diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c index f1d88483112c..8d816cce8322 100644 --- a/drivers/mfd/adp5520.c +++ b/drivers/mfd/adp5520.c @@ -109,7 +109,7 @@ int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask) ret = __adp5520_read(chip->client, reg, ®_val); - if (!ret && ((reg_val & bit_mask) == 0)) { + if (!ret && ((reg_val & bit_mask) != bit_mask)) { reg_val |= bit_mask; ret = __adp5520_write(chip->client, reg, reg_val); } diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 1b79c37fd599..1924b857a0fb 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -182,7 +182,7 @@ int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask) if (ret) goto out; - if ((reg_val & bit_mask) == 0) { + if ((reg_val & bit_mask) != bit_mask) { reg_val |= bit_mask; ret = __da903x_write(chip->client, reg, reg_val); } @@ -549,6 +549,7 @@ static int __devexit da903x_remove(struct i2c_client *client) struct da903x_chip *chip = i2c_get_clientdata(client); da903x_remove_subdevs(chip); + free_irq(client->irq, chip); kfree(chip); return 0; } diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 1e9ee533eacb..ef39528088f2 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -16,6 +16,7 @@ */ #include <linux/err.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/kernel.h> diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index bba26d96c240..a5ddf31b60ca 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -197,7 +197,7 @@ int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask) if (ret) goto out; - if ((reg_val & bit_mask) == 0) { + if ((reg_val & bit_mask) != bit_mask) { reg_val |= bit_mask; ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val); } diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 6f5b8cf2f652..c1da84bc1573 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -120,7 +120,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) goto out; } - data &= mask; + data &= ~mask; err = tps65910_i2c_write(tps65910, reg, 1, &data); if (err) dev_err(tps65910->dev, "write to reg %x failed\n", reg); diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index bfbd66021afd..61e70cfaa774 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -363,13 +363,13 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl_map[mod_no].sid; - twl = &twl_modules[sid]; - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } + sid = twl_map[mod_no].sid; + twl = &twl_modules[sid]; + mutex_lock(&twl->xfer_lock); /* * [MSG1]: fill the register address data @@ -420,13 +420,13 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl_map[mod_no].sid; - twl = &twl_modules[sid]; - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } + sid = twl_map[mod_no].sid; + twl = &twl_modules[sid]; + mutex_lock(&twl->xfer_lock); /* [MSG1] fill the register address data */ msg = &twl->xfer_msg[0]; diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index f062c8cc6c38..29f11e0765fe 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -432,6 +432,7 @@ struct sih_agent { u32 edge_change; struct mutex irq_lock; + char *irq_name; }; /*----------------------------------------------------------------------*/ @@ -589,7 +590,7 @@ static inline int sih_read_isr(const struct sih *sih) * Generic handler for SIH interrupts ... we "know" this is called * in task context, with IRQs enabled. */ -static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) +static irqreturn_t handle_twl4030_sih(int irq, void *data) { struct sih_agent *agent = irq_get_handler_data(irq); const struct sih *sih = agent->sih; @@ -602,7 +603,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) pr_err("twl4030: %s SIH, read ISR error %d\n", sih->name, isr); /* REVISIT: recover; eventually mask it all, etc */ - return; + return IRQ_HANDLED; } while (isr) { @@ -616,6 +617,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) pr_err("twl4030: %s SIH, invalid ISR bit %d\n", sih->name, irq); } + return IRQ_HANDLED; } static unsigned twl4030_irq_next; @@ -668,18 +670,19 @@ int twl4030_sih_setup(int module) activate_irq(irq); } - status = irq_base; twl4030_irq_next += i; /* replace generic PIH handler (handle_simple_irq) */ irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); - irq_set_chained_handler(irq, handle_twl4030_sih); + agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); + status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, + agent->irq_name ?: sih->name, NULL); pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, irq, irq_base, twl4030_irq_next - 1); - return status; + return status < 0 ? status : irq_base; } /* FIXME need a call to reverse twl4030_sih_setup() ... */ @@ -733,8 +736,9 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) } /* install an irq handler to demultiplex the TWL4030 interrupt */ - status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0, - "TWL4030-PIH", NULL); + status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, + IRQF_ONESHOT, + "TWL4030-PIH", NULL); if (status < 0) { pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status); goto fail_rqirq; diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 5d6ba132837e..61894fced8ea 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -239,6 +239,7 @@ static int wm8994_suspend(struct device *dev) switch (wm8994->type) { case WM8958: + case WM1811: ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); if (ret < 0) { dev_err(dev, "Failed to read power status: %d\n", ret); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e8a5eb38748b..d31c78b72b0f 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -302,17 +302,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->max_blk_size = 512; host->max_blk_count = PAGE_CACHE_SIZE / 512; - /* - * Enable runtime power management by default. This flag was added due - * to runtime power management causing disruption for some users, but - * the power on/off code has been improved since then. - * - * We'll enable this flag by default as an experiment, and if no - * problems are reported, we will follow up later and remove the flag - * altogether. - */ - host->caps = MMC_CAP_POWER_OFF_CARD; - return host; free: diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index a8b4d2aa18e5..f437c3e6f3aa 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -741,7 +741,7 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv); /* maybe switch power to the card */ - if (host->board->vcc_pin) { + if (gpio_is_valid(host->board->vcc_pin)) { switch (ios->power_mode) { case MMC_POWER_OFF: gpio_set_value(host->board->vcc_pin, 0); @@ -897,7 +897,7 @@ static int at91_mci_get_ro(struct mmc_host *mmc) { struct at91mci_host *host = mmc_priv(mmc); - if (host->board->wp_pin) + if (gpio_is_valid(host->board->wp_pin)) return !!gpio_get_value(host->board->wp_pin); /* * Board doesn't support read only detection; let the mmc core @@ -991,21 +991,21 @@ static int __init at91_mci_probe(struct platform_device *pdev) * Reserve GPIOs ... board init code makes sure these pins are set * up as GPIOs with the right direction (input, except for vcc) */ - if (host->board->det_pin) { + if (gpio_is_valid(host->board->det_pin)) { ret = gpio_request(host->board->det_pin, "mmc_detect"); if (ret < 0) { dev_dbg(&pdev->dev, "couldn't claim card detect pin\n"); goto fail4b; } } - if (host->board->wp_pin) { + if (gpio_is_valid(host->board->wp_pin)) { ret = gpio_request(host->board->wp_pin, "mmc_wp"); if (ret < 0) { dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n"); goto fail4; } } - if (host->board->vcc_pin) { + if (gpio_is_valid(host->board->vcc_pin)) { ret = gpio_request(host->board->vcc_pin, "mmc_vcc"); if (ret < 0) { dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n"); @@ -1057,7 +1057,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) /* * Add host to MMC layer */ - if (host->board->det_pin) { + if (gpio_is_valid(host->board->det_pin)) { host->present = !gpio_get_value(host->board->det_pin); } else @@ -1068,7 +1068,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) /* * monitor card insertion/removal if we can */ - if (host->board->det_pin) { + if (gpio_is_valid(host->board->det_pin)) { ret = request_irq(gpio_to_irq(host->board->det_pin), at91_mmc_det_irq, 0, mmc_hostname(mmc), host); if (ret) @@ -1087,13 +1087,13 @@ fail0: fail1: clk_put(host->mci_clk); fail2: - if (host->board->vcc_pin) + if (gpio_is_valid(host->board->vcc_pin)) gpio_free(host->board->vcc_pin); fail3: - if (host->board->wp_pin) + if (gpio_is_valid(host->board->wp_pin)) gpio_free(host->board->wp_pin); fail4: - if (host->board->det_pin) + if (gpio_is_valid(host->board->det_pin)) gpio_free(host->board->det_pin); fail4b: if (host->buffer) @@ -1125,7 +1125,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, MCI_BUFSIZE, host->buffer, host->physical_address); - if (host->board->det_pin) { + if (gpio_is_valid(host->board->det_pin)) { if (device_can_wakeup(&pdev->dev)) free_irq(gpio_to_irq(host->board->det_pin), host); device_init_wakeup(&pdev->dev, 0); @@ -1140,9 +1140,9 @@ static int __exit at91_mci_remove(struct platform_device *pdev) clk_disable(host->mci_clk); /* Disable the peripheral clock */ clk_put(host->mci_clk); - if (host->board->vcc_pin) + if (gpio_is_valid(host->board->vcc_pin)) gpio_free(host->board->vcc_pin); - if (host->board->wp_pin) + if (gpio_is_valid(host->board->wp_pin)) gpio_free(host->board->wp_pin); iounmap(host->baseaddr); @@ -1163,7 +1163,7 @@ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) struct at91mci_host *host = mmc_priv(mmc); int ret = 0; - if (host->board->det_pin && device_may_wakeup(&pdev->dev)) + if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev)) enable_irq_wake(host->board->det_pin); if (mmc) @@ -1178,7 +1178,7 @@ static int at91_mci_resume(struct platform_device *pdev) struct at91mci_host *host = mmc_priv(mmc); int ret = 0; - if (host->board->det_pin && device_may_wakeup(&pdev->dev)) + if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev)) disable_irq_wake(host->board->det_pin); if (mmc) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 50b5f9926f64..0726e59fd418 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -675,7 +675,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { /* First check for errors */ - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN)) { u32 remain, success; /* Terminate the DMA transfer */ @@ -754,8 +755,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } if (!cmd->data || cmd->error) { - if (host->data) + if (host->data) { + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) + mmci_dma_data_error(host); mmci_stop_data(host); + } mmci_request_end(host, cmd->mrq); } else if (!(cmd->data->flags & MMC_DATA_READ)) { mmci_start_data(host, cmd->data); @@ -955,8 +960,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); data = host->data; - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN| - MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data) + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| + MCI_DATABLOCKEND) && data) mmci_data_irq(host, data, status); cmd = host->cmd; diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 87b6f079b6e0..b4257e700617 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -109,13 +109,10 @@ static struct platform_driver sdhci_cns3xxx_driver = { .driver = { .name = "sdhci-cns3xxx", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_cns3xxx_probe, .remove = __devexit_p(sdhci_cns3xxx_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_cns3xxx_init(void) diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c index f2d29dca4420..a81312c91f70 100644 --- a/drivers/mmc/host/sdhci-dove.c +++ b/drivers/mmc/host/sdhci-dove.c @@ -82,13 +82,10 @@ static struct platform_driver sdhci_dove_driver = { .driver = { .name = "sdhci-dove", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_dove_probe, .remove = __devexit_p(sdhci_dove_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_dove_init(void) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4b976f00ea85..38ebc4ea259f 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -599,14 +599,11 @@ static struct platform_driver sdhci_esdhc_imx_driver = { .name = "sdhci-esdhc-imx", .owner = THIS_MODULE, .of_match_table = imx_esdhc_dt_ids, + .pm = SDHCI_PLTFM_PMOPS, }, .id_table = imx_esdhc_devtype, .probe = sdhci_esdhc_imx_probe, .remove = __devexit_p(sdhci_esdhc_imx_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_esdhc_imx_init(void) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 59e9d003e589..01e5f627e0f0 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -125,13 +125,10 @@ static struct platform_driver sdhci_esdhc_driver = { .name = "sdhci-esdhc", .owner = THIS_MODULE, .of_match_table = sdhci_esdhc_of_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_esdhc_probe, .remove = __devexit_p(sdhci_esdhc_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_esdhc_init(void) diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c index 9b0d794a4f69..3619adc7d9fc 100644 --- a/drivers/mmc/host/sdhci-of-hlwd.c +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -87,13 +87,10 @@ static struct platform_driver sdhci_hlwd_driver = { .name = "sdhci-hlwd", .owner = THIS_MODULE, .of_match_table = sdhci_hlwd_of_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_hlwd_probe, .remove = __devexit_p(sdhci_hlwd_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_hlwd_init(void) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index d833d9c2f7e3..6878a94626bc 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -54,8 +54,7 @@ struct sdhci_pci_fixes { int (*probe_slot) (struct sdhci_pci_slot *); void (*remove_slot) (struct sdhci_pci_slot *, int); - int (*suspend) (struct sdhci_pci_chip *, - pm_message_t); + int (*suspend) (struct sdhci_pci_chip *); int (*resume) (struct sdhci_pci_chip *); }; @@ -549,7 +548,7 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) jmicron_enable_mmc(slot->host, 0); } -static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +static int jmicron_suspend(struct sdhci_pci_chip *chip) { int i; @@ -993,8 +992,9 @@ static struct sdhci_ops sdhci_pci_ops = { #ifdef CONFIG_PM -static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) +static int sdhci_pci_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; mmc_pm_flag_t slot_pm_flags; @@ -1010,7 +1010,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) if (!slot) continue; - ret = sdhci_suspend_host(slot->host, state); + ret = sdhci_suspend_host(slot->host); if (ret) { for (i--; i >= 0; i--) @@ -1026,7 +1026,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) } if (chip->fixes && chip->fixes->suspend) { - ret = chip->fixes->suspend(chip, state); + ret = chip->fixes->suspend(chip); if (ret) { for (i = chip->num_slots - 1; i >= 0; i--) sdhci_resume_host(chip->slots[i]->host); @@ -1042,16 +1042,17 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) } pci_set_power_state(pdev, PCI_D3hot); } else { - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + pci_enable_wake(pdev, PCI_D3hot, 0); pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pci_set_power_state(pdev, PCI_D3hot); } return 0; } -static int sdhci_pci_resume(struct pci_dev *pdev) +static int sdhci_pci_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; int i, ret; @@ -1099,7 +1100,6 @@ static int sdhci_pci_runtime_suspend(struct device *dev) struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; - pm_message_t state = { .event = PM_EVENT_SUSPEND }; int i, ret; chip = pci_get_drvdata(pdev); @@ -1121,7 +1121,7 @@ static int sdhci_pci_runtime_suspend(struct device *dev) } if (chip->fixes && chip->fixes->suspend) { - ret = chip->fixes->suspend(chip, state); + ret = chip->fixes->suspend(chip); if (ret) { for (i = chip->num_slots - 1; i >= 0; i--) sdhci_runtime_resume_host(chip->slots[i]->host); @@ -1176,6 +1176,8 @@ static int sdhci_pci_runtime_idle(struct device *dev) #endif static const struct dev_pm_ops sdhci_pci_pm_ops = { + .suspend = sdhci_pci_suspend, + .resume = sdhci_pci_resume, .runtime_suspend = sdhci_pci_runtime_suspend, .runtime_resume = sdhci_pci_runtime_resume, .runtime_idle = sdhci_pci_runtime_idle, @@ -1428,8 +1430,6 @@ static struct pci_driver sdhci_driver = { .id_table = pci_ids, .probe = sdhci_pci_probe, .remove = __devexit_p(sdhci_pci_remove), - .suspend = sdhci_pci_suspend, - .resume = sdhci_pci_resume, .driver = { .pm = &sdhci_pci_pm_ops }, diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index a9e12ea05583..03970bcb3495 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -194,21 +194,25 @@ int sdhci_pltfm_unregister(struct platform_device *pdev) EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister); #ifdef CONFIG_PM -int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state) +static int sdhci_pltfm_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - return sdhci_suspend_host(host, state); + return sdhci_suspend_host(host); } -EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend); -int sdhci_pltfm_resume(struct platform_device *dev) +static int sdhci_pltfm_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); return sdhci_resume_host(host); } -EXPORT_SYMBOL_GPL(sdhci_pltfm_resume); + +const struct dev_pm_ops sdhci_pltfm_pmops = { + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +}; +EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops); #endif /* CONFIG_PM */ static int __init sdhci_pltfm_drv_init(void) diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index 3a9fc3f40840..37e0e184a0bb 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -99,8 +99,10 @@ extern int sdhci_pltfm_register(struct platform_device *pdev, extern int sdhci_pltfm_unregister(struct platform_device *pdev); #ifdef CONFIG_PM -extern int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state); -extern int sdhci_pltfm_resume(struct platform_device *dev); +extern const struct dev_pm_ops sdhci_pltfm_pmops; +#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops) +#else +#define SDHCI_PLTFM_PMOPS NULL #endif #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */ diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c index d4bf6d30c7ba..7a039c3cb1f1 100644 --- a/drivers/mmc/host/sdhci-pxav2.c +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -218,13 +218,10 @@ static struct platform_driver sdhci_pxav2_driver = { .driver = { .name = "sdhci-pxav2", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_pxav2_probe, .remove = __devexit_p(sdhci_pxav2_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_pxav2_init(void) { diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index cff4ad3e7a59..15673a7ee6a5 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -264,13 +264,10 @@ static struct platform_driver sdhci_pxav3_driver = { .driver = { .name = "sdhci-pxav3", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_pxav3_probe, .remove = __devexit_p(sdhci_pxav3_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_pxav3_init(void) { diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index cb60c4197e0a..9a20d1f55bb7 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -435,14 +435,11 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { struct clk *clk; - char *name = pdata->clocks[ptr]; - - if (name == NULL) - continue; + char name[14]; + snprintf(name, 14, "mmc_busclk.%d", ptr); clk = clk_get(dev, name); if (IS_ERR(clk)) { - dev_err(dev, "failed to get clock %s\n", name); continue; } @@ -622,23 +619,29 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) #ifdef CONFIG_PM -static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm) +static int sdhci_s3c_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - return sdhci_suspend_host(host, pm); + return sdhci_suspend_host(host); } -static int sdhci_s3c_resume(struct platform_device *dev) +static int sdhci_s3c_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); return sdhci_resume_host(host); } +static const struct dev_pm_ops sdhci_s3c_pmops = { + .suspend = sdhci_s3c_suspend, + .resume = sdhci_s3c_resume, +}; + +#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops) + #else -#define sdhci_s3c_suspend NULL -#define sdhci_s3c_resume NULL +#define SDHCI_S3C_PMOPS NULL #endif static struct platform_driver sdhci_s3c_driver = { @@ -647,6 +650,7 @@ static struct platform_driver sdhci_s3c_driver = { .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", + .pm = SDHCI_S3C_PMOPS, }, }; diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 89699e861fc1..e2e18d3f949c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -318,13 +318,10 @@ static struct platform_driver sdhci_tegra_driver = { .name = "sdhci-tegra", .owner = THIS_MODULE, .of_match_table = sdhci_tegra_dt_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_tegra_probe, .remove = __devexit_p(sdhci_tegra_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_tegra_init(void) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6d8eea323541..19ed580f2cab 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2327,7 +2327,7 @@ out: #ifdef CONFIG_PM -int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) +int sdhci_suspend_host(struct sdhci_host *host) { int ret; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0a5b65460d8a..a04d4d0c6fd2 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -374,7 +374,7 @@ extern int sdhci_add_host(struct sdhci_host *host); extern void sdhci_remove_host(struct sdhci_host *host, int dead); #ifdef CONFIG_PM -extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); +extern int sdhci_suspend_host(struct sdhci_host *host); extern int sdhci_resume_host(struct sdhci_host *host); extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); #endif diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index e8f6e65183d7..2ec978bc32ba 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -259,7 +259,7 @@ static int firmware_rom_wait_states = 0x04; static int firmware_rom_wait_states = 0x1C; #endif -module_param(firmware_rom_wait_states, bool, 0644); +module_param(firmware_rom_wait_states, int, 0644); MODULE_PARM_DESC(firmware_rom_wait_states, "ROM wait states byte=RRRIIEEE (Reserved Internal External)"); diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 94f553489725..45876d0e5b8e 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -227,10 +227,14 @@ static int platram_probe(struct platform_device *pdev) if (!err) dev_info(&pdev->dev, "registered mtd device\n"); - /* add the whole device. */ - err = mtd_device_register(info->mtd, NULL, 0); - if (err) - dev_err(&pdev->dev, "failed to register the entire device\n"); + if (pdata->nr_partitions) { + /* add the whole device. */ + err = mtd_device_register(info->mtd, NULL, 0); + if (err) { + dev_err(&pdev->dev, + "failed to register the entire device\n"); + } + } return err; diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 411a17df9fc1..2a25b6789af4 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -98,7 +98,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, probes, 0, NULL, 0); + mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts); platform_set_drvdata(pdev, info); return 0; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 23e5d77c39fc..4dd056e2e16a 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -113,7 +113,7 @@ static int cpu_has_dma(void) */ static void atmel_nand_enable(struct atmel_nand_host *host) { - if (host->board->enable_pin) + if (gpio_is_valid(host->board->enable_pin)) gpio_set_value(host->board->enable_pin, 0); } @@ -122,7 +122,7 @@ static void atmel_nand_enable(struct atmel_nand_host *host) */ static void atmel_nand_disable(struct atmel_nand_host *host) { - if (host->board->enable_pin) + if (gpio_is_valid(host->board->enable_pin)) gpio_set_value(host->board->enable_pin, 1); } @@ -492,7 +492,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->IO_ADDR_W = host->io_base; nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; - if (host->board->rdy_pin) + if (gpio_is_valid(host->board->rdy_pin)) nand_chip->dev_ready = atmel_nand_device_ready; regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -530,7 +530,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); atmel_nand_enable(host); - if (host->board->det_pin) { + if (gpio_is_valid(host->board->det_pin)) { if (gpio_get_value(host->board->det_pin)) { printk(KERN_INFO "No SmartMedia card inserted.\n"); res = -ENXIO; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 071b63420f0e..493ec2fcf97f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/mtd/gpmi-nand.h> #include <linux/mtd/partitions.h> - #include "gpmi-nand.h" /* add our owner bbt descriptor */ diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index ee1713907b92..f8aacf48ecdd 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -188,7 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, if (!flash_np) return -ENODEV; - ppdata->of_node = flash_np; + ppdata.of_node = flash_np; ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s", dev_name(&ndfc->ofdev->dev), flash_np->name); if (!ndfc->mtd.name) { diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 56624d303487..dfeb46cb3f74 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -26,6 +26,7 @@ #include <linux/skbuff.h> #include <linux/dma-mapping.h> #include <linux/ethtool.h> +#include <linux/platform_data/macb.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gfp.h> @@ -984,7 +985,7 @@ static const struct net_device_ops at91ether_netdev_ops = { static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address, struct platform_device *pdev, struct clk *ether_clk) { - struct at91_eth_data *board_data = pdev->dev.platform_data; + struct macb_platform_data *board_data = pdev->dev.platform_data; struct net_device *dev; struct at91_private *lp; unsigned int val; diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h index 353f4dab62be..3725fbb0defe 100644 --- a/drivers/net/ethernet/cadence/at91_ether.h +++ b/drivers/net/ethernet/cadence/at91_ether.h @@ -85,7 +85,9 @@ struct recv_desc_bufs struct at91_private { struct mii_if_info mii; /* ethtool support */ - struct at91_eth_data board_data; /* board-specific configuration */ + struct macb_platform_data board_data; /* board-specific + * configuration (shared with + * macb for common data */ struct clk *ether_clk; /* clock */ /* PHY */ diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index a437b46e5490..aa1d597091a8 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/clk.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -19,12 +20,10 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/macb.h> #include <linux/platform_device.h> #include <linux/phy.h> -#include <mach/board.h> -#include <mach/cpu.h> - #include "macb.h" #define RX_BUFFER_SIZE 128 @@ -84,7 +83,7 @@ static void __init macb_get_hwaddr(struct macb *bp) if (is_valid_ether_addr(addr)) { memcpy(bp->dev->dev_addr, addr, sizeof(addr)); } else { - dev_info(&bp->pdev->dev, "invalid hw address, using random\n"); + netdev_info(bp->dev, "invalid hw address, using random\n"); random_ether_addr(bp->dev->dev_addr); } } @@ -178,11 +177,12 @@ static void macb_handle_link_change(struct net_device *dev) if (status_change) { if (phydev->link) - printk(KERN_INFO "%s: link up (%d/%s)\n", - dev->name, phydev->speed, - DUPLEX_FULL == phydev->duplex ? "Full":"Half"); + netdev_info(dev, "link up (%d/%s)\n", + phydev->speed, + phydev->duplex == DUPLEX_FULL ? + "Full" : "Half"); else - printk(KERN_INFO "%s: link down\n", dev->name); + netdev_info(dev, "link down\n"); } } @@ -191,12 +191,12 @@ static int macb_mii_probe(struct net_device *dev) { struct macb *bp = netdev_priv(dev); struct phy_device *phydev; - struct eth_platform_data *pdata; + struct macb_platform_data *pdata; int ret; phydev = phy_find_first(bp->mii_bus); if (!phydev) { - printk (KERN_ERR "%s: no PHY found\n", dev->name); + netdev_err(dev, "no PHY found\n"); return -1; } @@ -209,7 +209,7 @@ static int macb_mii_probe(struct net_device *dev) PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII); if (ret) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + netdev_err(dev, "Could not attach to PHY\n"); return ret; } @@ -228,7 +228,7 @@ static int macb_mii_probe(struct net_device *dev) static int macb_mii_init(struct macb *bp) { - struct eth_platform_data *pdata; + struct macb_platform_data *pdata; int err = -ENXIO, i; /* Enable management port */ @@ -303,14 +303,13 @@ static void macb_tx(struct macb *bp) status = macb_readl(bp, TSR); macb_writel(bp, TSR, status); - dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n", - (unsigned long)status); + netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status); if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) { int i; - printk(KERN_ERR "%s: TX %s, resetting buffers\n", - bp->dev->name, status & MACB_BIT(UND) ? - "underrun" : "retry limit exceeded"); + netdev_err(bp->dev, "TX %s, resetting buffers\n", + status & MACB_BIT(UND) ? + "underrun" : "retry limit exceeded"); /* Transfer ongoing, disable transmitter, to avoid confusion */ if (status & MACB_BIT(TGO)) @@ -369,8 +368,8 @@ static void macb_tx(struct macb *bp) if (!(bufstat & MACB_BIT(TX_USED))) break; - dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n", - tail, skb->data); + netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n", + tail, skb->data); dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len, DMA_TO_DEVICE); bp->stats.tx_packets++; @@ -395,8 +394,8 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag, len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl); - dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n", - first_frag, last_frag, len); + netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n", + first_frag, last_frag, len); skb = dev_alloc_skb(len + RX_OFFSET); if (!skb) { @@ -437,8 +436,8 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag, bp->stats.rx_packets++; bp->stats.rx_bytes += len; - dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n", - skb->len, skb->csum); + netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n", + skb->len, skb->csum); netif_receive_skb(skb); return 0; @@ -515,8 +514,8 @@ static int macb_poll(struct napi_struct *napi, int budget) work_done = 0; - dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n", - (unsigned long)status, budget); + netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n", + (unsigned long)status, budget); work_done = macb_rx(bp, budget); if (work_done < budget) { @@ -565,8 +564,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) macb_writel(bp, IDR, MACB_RX_INT_FLAGS); if (napi_schedule_prep(&bp->napi)) { - dev_dbg(&bp->pdev->dev, - "scheduling RX softirq\n"); + netdev_dbg(bp->dev, "scheduling RX softirq\n"); __napi_schedule(&bp->napi); } } @@ -587,11 +585,11 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) if (status & MACB_BIT(HRESP)) { /* - * TODO: Reset the hardware, and maybe move the printk - * to a lower-priority context as well (work queue?) + * TODO: Reset the hardware, and maybe move the + * netdev_err to a lower-priority context as well + * (work queue?) */ - printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n", - dev->name); + netdev_err(dev, "DMA bus error: HRESP not OK\n"); } status = macb_readl(bp, ISR); @@ -626,16 +624,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned long flags; #ifdef DEBUG - int i; - dev_dbg(&bp->pdev->dev, - "start_xmit: len %u head %p data %p tail %p end %p\n", - skb->len, skb->head, skb->data, - skb_tail_pointer(skb), skb_end_pointer(skb)); - dev_dbg(&bp->pdev->dev, - "data:"); - for (i = 0; i < 16; i++) - printk(" %02x", (unsigned int)skb->data[i]); - printk("\n"); + netdev_dbg(bp->dev, + "start_xmit: len %u head %p data %p tail %p end %p\n", + skb->len, skb->head, skb->data, + skb_tail_pointer(skb), skb_end_pointer(skb)); + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1, + skb->data, 16, true); #endif len = skb->len; @@ -645,21 +639,20 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) if (TX_BUFFS_AVAIL(bp) < 1) { netif_stop_queue(dev); spin_unlock_irqrestore(&bp->lock, flags); - dev_err(&bp->pdev->dev, - "BUG! Tx Ring full when queue awake!\n"); - dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n", - bp->tx_head, bp->tx_tail); + netdev_err(bp->dev, "BUG! Tx Ring full when queue awake!\n"); + netdev_dbg(bp->dev, "tx_head = %u, tx_tail = %u\n", + bp->tx_head, bp->tx_tail); return NETDEV_TX_BUSY; } entry = bp->tx_head; - dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry); + netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry); mapping = dma_map_single(&bp->pdev->dev, skb->data, len, DMA_TO_DEVICE); bp->tx_skb[entry].skb = skb; bp->tx_skb[entry].mapping = mapping; - dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n", - skb->data, (unsigned long)mapping); + netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n", + skb->data, (unsigned long)mapping); ctrl = MACB_BF(TX_FRMLEN, len); ctrl |= MACB_BIT(TX_LAST); @@ -723,27 +716,27 @@ static int macb_alloc_consistent(struct macb *bp) &bp->rx_ring_dma, GFP_KERNEL); if (!bp->rx_ring) goto out_err; - dev_dbg(&bp->pdev->dev, - "Allocated RX ring of %d bytes at %08lx (mapped %p)\n", - size, (unsigned long)bp->rx_ring_dma, bp->rx_ring); + netdev_dbg(bp->dev, + "Allocated RX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_ring_dma, bp->rx_ring); size = TX_RING_BYTES; bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size, &bp->tx_ring_dma, GFP_KERNEL); if (!bp->tx_ring) goto out_err; - dev_dbg(&bp->pdev->dev, - "Allocated TX ring of %d bytes at %08lx (mapped %p)\n", - size, (unsigned long)bp->tx_ring_dma, bp->tx_ring); + netdev_dbg(bp->dev, + "Allocated TX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->tx_ring_dma, bp->tx_ring); size = RX_RING_SIZE * RX_BUFFER_SIZE; bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size, &bp->rx_buffers_dma, GFP_KERNEL); if (!bp->rx_buffers) goto out_err; - dev_dbg(&bp->pdev->dev, - "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n", - size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers); + netdev_dbg(bp->dev, + "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers); return 0; @@ -954,7 +947,7 @@ static int macb_open(struct net_device *dev) struct macb *bp = netdev_priv(dev); int err; - dev_dbg(&bp->pdev->dev, "open\n"); + netdev_dbg(bp->dev, "open\n"); /* if the phy is not yet register, retry later*/ if (!bp->phy_dev) @@ -965,9 +958,8 @@ static int macb_open(struct net_device *dev) err = macb_alloc_consistent(bp); if (err) { - printk(KERN_ERR - "%s: Unable to allocate DMA memory (error %d)\n", - dev->name, err); + netdev_err(dev, "Unable to allocate DMA memory (error %d)\n", + err); return err; } @@ -1119,7 +1111,7 @@ static const struct net_device_ops macb_netdev_ops = { static int __init macb_probe(struct platform_device *pdev) { - struct eth_platform_data *pdata; + struct macb_platform_data *pdata; struct resource *regs; struct net_device *dev; struct macb *bp; @@ -1152,28 +1144,19 @@ static int __init macb_probe(struct platform_device *pdev) spin_lock_init(&bp->lock); -#if defined(CONFIG_ARCH_AT91) - bp->pclk = clk_get(&pdev->dev, "macb_clk"); + bp->pclk = clk_get(&pdev->dev, "pclk"); if (IS_ERR(bp->pclk)) { dev_err(&pdev->dev, "failed to get macb_clk\n"); goto err_out_free_dev; } clk_enable(bp->pclk); -#else - bp->pclk = clk_get(&pdev->dev, "pclk"); - if (IS_ERR(bp->pclk)) { - dev_err(&pdev->dev, "failed to get pclk\n"); - goto err_out_free_dev; - } + bp->hclk = clk_get(&pdev->dev, "hclk"); if (IS_ERR(bp->hclk)) { dev_err(&pdev->dev, "failed to get hclk\n"); goto err_out_put_pclk; } - - clk_enable(bp->pclk); clk_enable(bp->hclk); -#endif bp->regs = ioremap(regs->start, resource_size(regs)); if (!bp->regs) { @@ -1185,9 +1168,8 @@ static int __init macb_probe(struct platform_device *pdev) dev->irq = platform_get_irq(pdev, 0); err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev); if (err) { - printk(KERN_ERR - "%s: Unable to request IRQ %d (error %d)\n", - dev->name, dev->irq, err); + dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n", + dev->irq, err); goto err_out_iounmap; } @@ -1239,13 +1221,12 @@ static int __init macb_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); - printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n", - dev->name, dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n", + dev->base_addr, dev->irq, dev->dev_addr); phydev = bp->phy_dev; - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, - phydev->drv->name, dev_name(&phydev->dev), phydev->irq); + netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq); return 0; @@ -1256,14 +1237,10 @@ err_out_free_irq: err_out_iounmap: iounmap(bp->regs); err_out_disable_clocks: -#ifndef CONFIG_ARCH_AT91 clk_disable(bp->hclk); clk_put(bp->hclk); -#endif clk_disable(bp->pclk); -#ifndef CONFIG_ARCH_AT91 err_out_put_pclk: -#endif clk_put(bp->pclk); err_out_free_dev: free_netdev(dev); @@ -1289,10 +1266,8 @@ static int __exit macb_remove(struct platform_device *pdev) unregister_netdev(dev); free_irq(dev->irq, dev); iounmap(bp->regs); -#ifndef CONFIG_ARCH_AT91 clk_disable(bp->hclk); clk_put(bp->hclk); -#endif clk_disable(bp->pclk); clk_put(bp->pclk); free_netdev(dev); @@ -1310,9 +1285,7 @@ static int macb_suspend(struct platform_device *pdev, pm_message_t state) netif_device_detach(netdev); -#ifndef CONFIG_ARCH_AT91 clk_disable(bp->hclk); -#endif clk_disable(bp->pclk); return 0; @@ -1324,9 +1297,7 @@ static int macb_resume(struct platform_device *pdev) struct macb *bp = netdev_priv(netdev); clk_enable(bp->pclk); -#ifndef CONFIG_ARCH_AT91 clk_enable(bp->hclk); -#endif netif_device_attach(netdev); diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index c7b60839ac99..dea0cb4400e2 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -2606,6 +2606,9 @@ static int skge_up(struct net_device *dev) spin_unlock_irq(&hw->hw_lock); napi_enable(&skge->napi); + + skge_set_multicast(dev); + return 0; free_tx_ring: diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c index 227997d775e8..5829e0b47e7e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c @@ -147,6 +147,7 @@ void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); if (priv->mdev->dev->caps.comp_pool && cq->vector) mlx4_release_eq(priv->mdev->dev, cq->vector); + cq->vector = 0; cq->buf_size = 0; cq->buf = NULL; } diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 67bf07819992..c8f47f17186f 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -477,7 +477,6 @@ enum rtl_register_content { /* Config1 register p.24 */ LEDS1 = (1 << 7), LEDS0 = (1 << 6), - MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */ Speed_down = (1 << 4), MEMMAP = (1 << 3), IOMAP = (1 << 2), @@ -485,6 +484,7 @@ enum rtl_register_content { PMEnable = (1 << 0), /* Power Management Enable */ /* Config2 register p. 25 */ + MSIEnable = (1 << 5), /* 8169 only. Reserved in the 8168. */ PCI_Clock_66MHz = 0x01, PCI_Clock_33MHz = 0x00, @@ -3426,22 +3426,24 @@ static const struct rtl_cfg_info { }; /* Cfg9346_Unlock assumed. */ -static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr, +static unsigned rtl_try_msi(struct rtl8169_private *tp, const struct rtl_cfg_info *cfg) { + void __iomem *ioaddr = tp->mmio_addr; unsigned msi = 0; u8 cfg2; cfg2 = RTL_R8(Config2) & ~MSIEnable; if (cfg->features & RTL_FEATURE_MSI) { - if (pci_enable_msi(pdev)) { - dev_info(&pdev->dev, "no MSI. Back to INTx.\n"); + if (pci_enable_msi(tp->pci_dev)) { + netif_info(tp, hw, tp->dev, "no MSI. Back to INTx.\n"); } else { cfg2 |= MSIEnable; msi = RTL_FEATURE_MSI; } } - RTL_W8(Config2, cfg2); + if (tp->mac_version <= RTL_GIGA_MAC_VER_06) + RTL_W8(Config2, cfg2); return msi; } @@ -4077,7 +4079,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->features |= RTL_FEATURE_WOL; if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0) tp->features |= RTL_FEATURE_WOL; - tp->features |= rtl_try_msi(pdev, ioaddr, cfg); + tp->features |= rtl_try_msi(tp, cfg); RTL_W8(Cfg9346, Cfg9346_Lock); if (rtl_tbi_enabled(tp)) { diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index dca9d3369cdd..c97d2f590855 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -836,11 +836,13 @@ int cpdma_chan_stop(struct cpdma_chan *chan) chan_write(chan, cp, CPDMA_TEARDOWN_VALUE); /* handle completed packets */ + spin_unlock_irqrestore(&chan->lock, flags); do { ret = __cpdma_chan_process(chan); if (ret < 0) break; } while ((ret & CPDMA_DESC_TD_COMPLETE) == 0); + spin_lock_irqsave(&chan->lock, flags); /* remaining packets haven't been tx/rx'ed, clean them up */ while (chan->head) { diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e6fed4d4cb77..e95f0e60a9bc 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1655,6 +1655,10 @@ static const struct usb_device_id products [] = { // ASIX 88772a USB_DEVICE(0x0db0, 0xa877), .driver_info = (unsigned long) &ax88772_info, +}, { + // Asus USB Ethernet Adapter + USB_DEVICE (0x0b95, 0x7e2b), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 888abc2be3a5..528d5f3e868c 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1271,7 +1271,9 @@ static void ath_rc_init(struct ath_softc *sc, ath_rc_priv->max_valid_rate = k; ath_rc_sort_validrates(rate_table, ath_rc_priv); - ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; + ath_rc_priv->rate_max_phy = (k > 4) ? + ath_rc_priv->valid_rate_index[k-4] : + ath_rc_priv->valid_rate_index[k-1]; ath_rc_priv->rate_table = rate_table; ath_dbg(common, ATH_DBG_CONFIG, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index a7a6def40d05..5c7c17c7166a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -606,8 +606,8 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) if (ctx->ht.enabled) { /* if HT40 is used, it should not change * after associated except channel switch */ - if (iwl_is_associated_ctx(ctx) && - !ctx->ht.is_40mhz) + if (!ctx->ht.is_40mhz || + !iwl_is_associated_ctx(ctx)) iwlagn_config_ht40(conf, ctx); } else ctx->ht.is_40mhz = false; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 35a6b71f358c..df1540ca6102 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -91,7 +91,10 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, tx_cmd->tid_tspec = qc[0] & 0xf; tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; } else { - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + else + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; } iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index bacc06c95e7a..e0e9a3dfbc00 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2850,6 +2850,9 @@ static int iwlagn_mac_tx_sync(struct ieee80211_hw *hw, int ret; u8 sta_id; + if (ctx->ctxid != IWL_RXON_CTX_PAN) + return 0; + IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->shrd->mutex); @@ -2898,6 +2901,9 @@ static void iwlagn_mac_finish_tx_sync(struct ieee80211_hw *hw, struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; struct iwl_rxon_context *ctx = vif_priv->ctx; + if (ctx->ctxid != IWL_RXON_CTX_PAN) + return; + IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->shrd->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index ce918980e977..5f17ab8e76ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -1197,9 +1197,7 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, iwl_print_hex_dump(trans, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - if (is_agg) - iwl_trans_txq_update_byte_cnt_tbl(trans, txq, - le16_to_cpu(tx_cmd->len)); + iwl_trans_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); dma_sync_single_for_device(bus(trans)->dev, txcmd_phys, firstlen, DMA_BIDIRECTIONAL); diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index ac278156d390..6e0a3eaecf70 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -939,7 +939,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) { struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; unsigned long cmd_flags; - unsigned long cmd_pending_q_flags; unsigned long scan_pending_q_flags; uint16_t cancel_scan_cmd = false; @@ -949,12 +948,9 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) cmd_node = adapter->curr_cmd; cmd_node->wait_q_enabled = false; cmd_node->cmd_flag |= CMD_F_CANCELED; - spin_lock_irqsave(&adapter->cmd_pending_q_lock, - cmd_pending_q_flags); - list_del(&cmd_node->list); - spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, - cmd_pending_q_flags); mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + mwifiex_complete_cmd(adapter, adapter->curr_cmd); + adapter->curr_cmd = NULL; spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); } @@ -981,7 +977,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); } adapter->cmd_wait_q.status = -1; - mwifiex_complete_cmd(adapter, adapter->curr_cmd); } /* diff --git a/drivers/of/platform.c b/drivers/of/platform.c index cbd5d701c7e0..63b3ec48c203 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -314,7 +314,7 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l if (!lookup) return NULL; - for(; lookup->name != NULL; lookup++) { + for(; lookup->compatible != NULL; lookup++) { if (!of_device_is_compatible(np, lookup->compatible)) continue; if (of_address_to_resource(np, 0, &res)) diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c index 89f63456646f..84a208dbed93 100644 --- a/drivers/oprofile/oprofile_files.c +++ b/drivers/oprofile/oprofile_files.c @@ -45,7 +45,7 @@ static ssize_t timeout_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_timeout(val); @@ -84,7 +84,7 @@ static ssize_t depth_write(struct file *file, char const __user *buf, size_t cou return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_ulong(&oprofile_backtrace_depth, val); @@ -141,9 +141,10 @@ static ssize_t enable_write(struct file *file, char const __user *buf, size_t co return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; + retval = 0; if (val) retval = oprofile_start(); else diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c index d0de6cc2d7a5..2f0aa0f700e6 100644 --- a/drivers/oprofile/oprofilefs.c +++ b/drivers/oprofile/oprofilefs.c @@ -60,6 +60,13 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t cou } +/* + * Note: If oprofilefs_ulong_from_user() returns 0, then *val remains + * unchanged and might be uninitialized. This follows write syscall + * implementation when count is zero: "If count is zero ... [and if] + * no errors are detected, 0 will be returned without causing any + * other effect." (man 2 write) + */ int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count) { char tmpbuf[TMPBUFSIZE]; @@ -79,7 +86,7 @@ int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_ raw_spin_lock_irqsave(&oprofilefs_lock, flags); *val = simple_strtoul(tmpbuf, NULL, 0); raw_spin_unlock_irqrestore(&oprofilefs_lock, flags); - return 0; + return count; } @@ -99,7 +106,7 @@ static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_ return -EINVAL; retval = oprofilefs_ulong_from_user(&value, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_ulong(file->private_data, value); diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index 7ec56fb0bd78..b0dd08e6a9da 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -13,6 +13,7 @@ #include <linux/export.h> #include <linux/pci-ats.h> #include <linux/pci.h> +#include <linux/slab.h> #include "pci.h" diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index fce1c54a0c8d..9ddf69e3bbef 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -132,6 +132,18 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; + pdev = pbus->self; + if (pdev && pci_is_pcie(pdev)) { + tmp = acpi_find_root_bridge_handle(pdev); + if (tmp) { + struct acpi_pci_root *root = acpi_pci_find_root(tmp); + + if (root && (root->osc_control_set & + OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return AE_OK; + } + } + acpi_evaluate_integer(handle, "_ADR", NULL, &adr); device = (adr >> 16) & 0xffff; function = adr & 0xffff; @@ -213,7 +225,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); if (pdev) { - pdev->current_state = PCI_D0; slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); pci_dev_put(pdev); } @@ -459,17 +470,8 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; - struct acpi_pci_root *root; acpi_handle dummy_handle; - /* - * We shouldn't use this bridge if PCIe native hotplug control has been - * granted by the BIOS for it. - */ - root = acpi_pci_find_root(handle); - if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) - return -ENODEV; - /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1385,19 +1387,11 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { - struct acpi_pci_root *root; int *count = (int *)context; if (!acpi_is_root_bridge(handle)) return AE_OK; - root = acpi_pci_find_root(handle); - if (!root) - return AE_OK; - - if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) - return AE_OK; - (*count)++; acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, handle_hotplug_event_bridge, NULL); diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index b82c155d7b37..1969a3ee3058 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -283,6 +283,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) struct resource *res; struct pci_dev *pdev; struct pci_sriov *iov = dev->sriov; + int bars = 0; if (!nr_virtfn) return 0; @@ -307,6 +308,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) nres = 0; for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { + bars |= (1 << (i + PCI_IOV_RESOURCES)); res = dev->resource + PCI_IOV_RESOURCES + i; if (res->parent) nres++; @@ -324,6 +326,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) return -ENOMEM; } + if (pci_enable_resources(dev, bars)) { + dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n"); + return -ENOMEM; + } + if (iov->link != dev->devfn) { pdev = pci_get_slot(dev->bus, iov->link); if (!pdev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6f45a73c6e9f..6d4a5319148d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -664,6 +664,9 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); + /* Fall back to PCI_D0 if native PM is not supported */ + if (!dev->pm_cap) + dev->current_state = PCI_D0; } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ @@ -1126,7 +1129,11 @@ static int __pci_enable_device_flags(struct pci_dev *dev, if (atomic_add_return(1, &dev->enable_cnt) > 1) return 0; /* already enabled */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) + /* only skip sriov related */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) + if (dev->resource[i].flags & flags) + bars |= (1 << i); + for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) if (dev->resource[i].flags & flags) bars |= (1 << i); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index fa4d9f324189..3bcc7cfcaba7 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -73,6 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm) err = -EINVAL; mutex_unlock(&rtc->ops_lock); + /* A timer might have just expired */ + schedule_work(&rtc->irqwork); return err; } EXPORT_SYMBOL_GPL(rtc_set_time); @@ -112,6 +114,8 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) err = -EINVAL; mutex_unlock(&rtc->ops_lock); + /* A timer might have just expired */ + schedule_work(&rtc->irqwork); return err; } @@ -403,6 +407,8 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node); } mutex_unlock(&rtc->ops_lock); + /* maybe that was in the past.*/ + schedule_work(&rtc->irqwork); return err; } EXPORT_SYMBOL_GPL(rtc_initialize_alarm); diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index e39b77a4609a..dc474bc6522d 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -32,11 +32,17 @@ #include <mach/at91_rtc.h> +#define at91_rtc_read(field) \ + __raw_readl(at91_rtc_regs + field) +#define at91_rtc_write(field, val) \ + __raw_writel((val), at91_rtc_regs + field) #define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */ static DECLARE_COMPLETION(at91_rtc_updated); static unsigned int at91_alarm_year = AT91_RTC_EPOCH; +static void __iomem *at91_rtc_regs; +static int irq; /* * Decode time/date into rtc_time structure @@ -48,10 +54,10 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, /* must read twice in case it changes */ do { - time = at91_sys_read(timereg); - date = at91_sys_read(calreg); - } while ((time != at91_sys_read(timereg)) || - (date != at91_sys_read(calreg))); + time = at91_rtc_read(timereg); + date = at91_rtc_read(calreg); + } while ((time != at91_rtc_read(timereg)) || + (date != at91_rtc_read(calreg))); tm->tm_sec = bcd2bin((time & AT91_RTC_SEC) >> 0); tm->tm_min = bcd2bin((time & AT91_RTC_MIN) >> 8); @@ -98,19 +104,19 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) tm->tm_hour, tm->tm_min, tm->tm_sec); /* Stop Time/Calendar from counting */ - cr = at91_sys_read(AT91_RTC_CR); - at91_sys_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); + cr = at91_rtc_read(AT91_RTC_CR); + at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); - at91_sys_write(AT91_RTC_IER, AT91_RTC_ACKUPD); + at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD); wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ - at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD); + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD); - at91_sys_write(AT91_RTC_TIMR, + at91_rtc_write(AT91_RTC_TIMR, bin2bcd(tm->tm_sec) << 0 | bin2bcd(tm->tm_min) << 8 | bin2bcd(tm->tm_hour) << 16); - at91_sys_write(AT91_RTC_CALR, + at91_rtc_write(AT91_RTC_CALR, bin2bcd((tm->tm_year + 1900) / 100) /* century */ | bin2bcd(tm->tm_year % 100) << 8 /* year */ | bin2bcd(tm->tm_mon + 1) << 16 /* tm_mon starts at zero */ @@ -118,8 +124,8 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) | bin2bcd(tm->tm_mday) << 24); /* Restart Time/Calendar */ - cr = at91_sys_read(AT91_RTC_CR); - at91_sys_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM)); + cr = at91_rtc_read(AT91_RTC_CR); + at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM)); return 0; } @@ -135,7 +141,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); tm->tm_year = at91_alarm_year - 1900; - alrm->enabled = (at91_sys_read(AT91_RTC_IMR) & AT91_RTC_ALARM) + alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM) ? 1 : 0; pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -160,20 +166,20 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) tm.tm_min = alrm->time.tm_min; tm.tm_sec = alrm->time.tm_sec; - at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM); - at91_sys_write(AT91_RTC_TIMALR, + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_TIMALR, bin2bcd(tm.tm_sec) << 0 | bin2bcd(tm.tm_min) << 8 | bin2bcd(tm.tm_hour) << 16 | AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN); - at91_sys_write(AT91_RTC_CALALR, + at91_rtc_write(AT91_RTC_CALALR, bin2bcd(tm.tm_mon + 1) << 16 /* tm_mon starts at zero */ | bin2bcd(tm.tm_mday) << 24 | AT91_RTC_DATEEN | AT91_RTC_MTHEN); if (alrm->enabled) { - at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); } pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, @@ -188,10 +194,10 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) pr_debug("%s(): cmd=%08x\n", __func__, enabled); if (enabled) { - at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM); - at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM); } else - at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM); + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM); return 0; } @@ -200,7 +206,7 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) */ static int at91_rtc_proc(struct device *dev, struct seq_file *seq) { - unsigned long imr = at91_sys_read(AT91_RTC_IMR); + unsigned long imr = at91_rtc_read(AT91_RTC_IMR); seq_printf(seq, "update_IRQ\t: %s\n", (imr & AT91_RTC_ACKUPD) ? "yes" : "no"); @@ -220,7 +226,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) unsigned int rtsr; unsigned long events = 0; - rtsr = at91_sys_read(AT91_RTC_SR) & at91_sys_read(AT91_RTC_IMR); + rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR); if (rtsr) { /* this interrupt is shared! Is it ours? */ if (rtsr & AT91_RTC_ALARM) events |= (RTC_AF | RTC_IRQF); @@ -229,7 +235,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) if (rtsr & AT91_RTC_ACKUPD) complete(&at91_rtc_updated); - at91_sys_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ + at91_rtc_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ rtc_update_irq(rtc, 1, events); @@ -256,22 +262,41 @@ static const struct rtc_class_ops at91_rtc_ops = { static int __init at91_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; - int ret; + struct resource *regs; + int ret = 0; - at91_sys_write(AT91_RTC_CR, 0); - at91_sys_write(AT91_RTC_MR, 0); /* 24 hour mode */ + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no mmio resource defined\n"); + return -ENXIO; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq resource defined\n"); + return -ENXIO; + } + + at91_rtc_regs = ioremap(regs->start, resource_size(regs)); + if (!at91_rtc_regs) { + dev_err(&pdev->dev, "failed to map registers, aborting.\n"); + return -ENOMEM; + } + + at91_rtc_write(AT91_RTC_CR, 0); + at91_rtc_write(AT91_RTC_MR, 0); /* 24 hour mode */ /* Disable all interrupts */ - at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); - ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, + ret = request_irq(irq, at91_rtc_interrupt, IRQF_SHARED, "at91_rtc", pdev); if (ret) { printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n", - AT91_ID_SYS); + irq); return ret; } @@ -284,7 +309,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev) rtc = rtc_device_register(pdev->name, &pdev->dev, &at91_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { - free_irq(AT91_ID_SYS, pdev); + free_irq(irq, pdev); return PTR_ERR(rtc); } platform_set_drvdata(pdev, rtc); @@ -301,10 +326,10 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) struct rtc_device *rtc = platform_get_drvdata(pdev); /* Disable all interrupts */ - at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | AT91_RTC_SECEV | AT91_RTC_TIMEV | AT91_RTC_CALEV); - free_irq(AT91_ID_SYS, pdev); + free_irq(irq, pdev); rtc_device_unregister(rtc); platform_set_drvdata(pdev, NULL); @@ -323,13 +348,13 @@ static int at91_rtc_suspend(struct device *dev) /* this IRQ is shared with DBGU and other hardware which isn't * necessarily doing PM like we are... */ - at91_rtc_imr = at91_sys_read(AT91_RTC_IMR) + at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR) & (AT91_RTC_ALARM|AT91_RTC_SECEV); if (at91_rtc_imr) { if (device_may_wakeup(dev)) - enable_irq_wake(AT91_ID_SYS); + enable_irq_wake(irq); else - at91_sys_write(AT91_RTC_IDR, at91_rtc_imr); + at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr); } return 0; } @@ -338,9 +363,9 @@ static int at91_rtc_resume(struct device *dev) { if (at91_rtc_imr) { if (device_may_wakeup(dev)) - disable_irq_wake(AT91_ID_SYS); + disable_irq_wake(irq); else - at91_sys_write(AT91_RTC_IER, at91_rtc_imr); + at91_rtc_write(AT91_RTC_IER, at91_rtc_imr); } return 0; } diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index eda128fc1d38..64aedd8cc095 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -357,10 +357,19 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t) static struct rtc_class_ops m41t80_rtc_ops = { .read_time = m41t80_rtc_read_time, .set_time = m41t80_rtc_set_time, + /* + * XXX - m41t80 alarm functionality is reported broken. + * until it is fixed, don't register alarm functions. + * .read_alarm = m41t80_rtc_read_alarm, .set_alarm = m41t80_rtc_set_alarm, + */ .proc = m41t80_rtc_proc, + /* + * See above comment on broken alarm + * .alarm_irq_enable = m41t80_rtc_alarm_irq_enable, + */ }; #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 5b979d9cc332..175067a17c46 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -25,6 +25,7 @@ #include <linux/clk.h> #include <linux/log2.h> #include <linux/slab.h> +#include <linux/of.h> #include <mach/hardware.h> #include <asm/uaccess.h> @@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) goto err_nortc; } - s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; +#ifdef CONFIG_OF + if (pdev->dev.of_node) + s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410; + else +#endif + s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; /* Check RTC Time */ @@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id s3c_rtc_dt_match[] = { + { .compatible = "samsung,s3c2410-rtc" }, + { .compatible = "samsung,s3c6410-rtc" }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match); +#else +#define s3c_rtc_dt_match NULL +#endif + static struct platform_device_id s3c_rtc_driver_ids[] = { { .name = "s3c2410-rtc", @@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = { .driver = { .name = "s3c-rtc", .owner = THIS_MODULE, + .of_match_table = s3c_rtc_dt_match, }, }; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 11f07f888223..b79576b64f45 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -55,6 +55,10 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdev) { struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); + /* if previous slave_alloc returned early, there is nothing to do */ + if (!zfcp_sdev->port) + return; + zfcp_erp_lun_shutdown_wait(sdev, "scssd_1"); put_device(&zfcp_sdev->port->dev); } diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index dba72a4e6a1c..1ad0b8225560 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1906,18 +1906,19 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session, spin_lock(&session->lock); task = iscsi_itt_to_task(bnx2i_conn->cls_conn->dd_data, cqe->itt & ISCSI_CMD_RESPONSE_INDEX); - if (!task) { + if (!task || !task->sc) { spin_unlock(&session->lock); return -EINVAL; } sc = task->sc; - spin_unlock(&session->lock); if (!blk_rq_cpu_valid(sc->request)) cpu = smp_processor_id(); else cpu = sc->request->cpu; + spin_unlock(&session->lock); + p = &per_cpu(bnx2i_percpu, cpu); spin_lock(&p->p_work_lock); if (unlikely(!p->iothread)) { diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index cefbe44bb84a..8d67467dd9ce 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -31,6 +31,8 @@ #include <linux/sysfs.h> #include <linux/ctype.h> #include <linux/workqueue.h> +#include <net/dcbnl.h> +#include <net/dcbevent.h> #include <scsi/scsi_tcq.h> #include <scsi/scsicam.h> #include <scsi/scsi_transport.h> @@ -101,6 +103,8 @@ static int fcoe_ddp_done(struct fc_lport *, u16); static int fcoe_ddp_target(struct fc_lport *, u16, struct scatterlist *, unsigned int); static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *); +static int fcoe_dcb_app_notification(struct notifier_block *notifier, + ulong event, void *ptr); static bool fcoe_match(struct net_device *netdev); static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode); @@ -129,6 +133,11 @@ static struct notifier_block fcoe_cpu_notifier = { .notifier_call = fcoe_cpu_callback, }; +/* notification function for DCB events */ +static struct notifier_block dcb_notifier = { + .notifier_call = fcoe_dcb_app_notification, +}; + static struct scsi_transport_template *fcoe_nport_scsi_transport; static struct scsi_transport_template *fcoe_vport_scsi_transport; @@ -1522,6 +1531,8 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) skb_reset_network_header(skb); skb->mac_len = elen; skb->protocol = htons(ETH_P_FCOE); + skb->priority = port->priority; + if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN && fcoe->realdev->features & NETIF_F_HW_VLAN_TX) { skb->vlan_tci = VLAN_TAG_PRESENT | @@ -1624,6 +1635,7 @@ static inline int fcoe_filter_frames(struct fc_lport *lport, stats->InvalidCRCCount++; if (stats->InvalidCRCCount < 5) printk(KERN_WARNING "fcoe: dropping frame with CRC error\n"); + put_cpu(); return -EINVAL; } @@ -1746,6 +1758,7 @@ int fcoe_percpu_receive_thread(void *arg) */ static void fcoe_dev_setup(void) { + register_dcbevent_notifier(&dcb_notifier); register_netdevice_notifier(&fcoe_notifier); } @@ -1754,9 +1767,69 @@ static void fcoe_dev_setup(void) */ static void fcoe_dev_cleanup(void) { + unregister_dcbevent_notifier(&dcb_notifier); unregister_netdevice_notifier(&fcoe_notifier); } +static struct fcoe_interface * +fcoe_hostlist_lookup_realdev_port(struct net_device *netdev) +{ + struct fcoe_interface *fcoe; + struct net_device *real_dev; + + list_for_each_entry(fcoe, &fcoe_hostlist, list) { + if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN) + real_dev = vlan_dev_real_dev(fcoe->netdev); + else + real_dev = fcoe->netdev; + + if (netdev == real_dev) + return fcoe; + } + return NULL; +} + +static int fcoe_dcb_app_notification(struct notifier_block *notifier, + ulong event, void *ptr) +{ + struct dcb_app_type *entry = ptr; + struct fcoe_interface *fcoe; + struct net_device *netdev; + struct fcoe_port *port; + int prio; + + if (entry->app.selector != DCB_APP_IDTYPE_ETHTYPE) + return NOTIFY_OK; + + netdev = dev_get_by_index(&init_net, entry->ifindex); + if (!netdev) + return NOTIFY_OK; + + fcoe = fcoe_hostlist_lookup_realdev_port(netdev); + dev_put(netdev); + if (!fcoe) + return NOTIFY_OK; + + if (entry->dcbx & DCB_CAP_DCBX_VER_CEE) + prio = ffs(entry->app.priority) - 1; + else + prio = entry->app.priority; + + if (prio < 0) + return NOTIFY_OK; + + if (entry->app.protocol == ETH_P_FIP || + entry->app.protocol == ETH_P_FCOE) + fcoe->ctlr.priority = prio; + + if (entry->app.protocol == ETH_P_FCOE) { + port = lport_priv(fcoe->ctlr.lp); + port->priority = prio; + } + + return NOTIFY_OK; +} + /** * fcoe_device_notification() - Handler for net device events * @notifier: The context of the notification @@ -1965,6 +2038,46 @@ static bool fcoe_match(struct net_device *netdev) } /** + * fcoe_dcb_create() - Initialize DCB attributes and hooks + * @netdev: The net_device object of the L2 link that should be queried + * @port: The fcoe_port to bind FCoE APP priority with + * @ + */ +static void fcoe_dcb_create(struct fcoe_interface *fcoe) +{ +#ifdef CONFIG_DCB + int dcbx; + u8 fup, up; + struct net_device *netdev = fcoe->realdev; + struct fcoe_port *port = lport_priv(fcoe->ctlr.lp); + struct dcb_app app = { + .priority = 0, + .protocol = ETH_P_FCOE + }; + + /* setup DCB priority attributes. */ + if (netdev && netdev->dcbnl_ops && netdev->dcbnl_ops->getdcbx) { + dcbx = netdev->dcbnl_ops->getdcbx(netdev); + + if (dcbx & DCB_CAP_DCBX_VER_IEEE) { + app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE; + up = dcb_ieee_getapp_mask(netdev, &app); + app.protocol = ETH_P_FIP; + fup = dcb_ieee_getapp_mask(netdev, &app); + } else { + app.selector = DCB_APP_IDTYPE_ETHTYPE; + up = dcb_getapp(netdev, &app); + app.protocol = ETH_P_FIP; + fup = dcb_getapp(netdev, &app); + } + + port->priority = ffs(up) ? ffs(up) - 1 : 0; + fcoe->ctlr.priority = ffs(fup) ? ffs(fup) - 1 : port->priority; + } +#endif +} + +/** * fcoe_create() - Create a fcoe interface * @netdev : The net_device object the Ethernet interface to create on * @fip_mode: The FIP mode for this creation @@ -2007,6 +2120,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) /* Make this the "master" N_Port */ fcoe->ctlr.lp = lport; + /* setup DCB priority attributes. */ + fcoe_dcb_create(fcoe); + /* add to lports list */ fcoe_hostlist_add(lport); diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index c74c4b8e71ef..e7522dcc296e 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -320,6 +320,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf) skb_put(skb, sizeof(*sol)); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); fip->send(fip, skb); @@ -474,6 +475,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, } skb_put(skb, len); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); fip->send(fip, skb); @@ -566,6 +568,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport, cap->fip.fip_dl_len = htons(dlen / FIP_BPW); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); return 0; @@ -1911,6 +1914,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip, skb_put(skb, len); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 4e041f6d808c..d570573b7963 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -4335,7 +4335,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) /* insert into event log */ sz = offsetof(Mpi2EventNotificationReply_t, EventData) + sizeof(Mpi2EventDataSasDeviceStatusChange_t); - event_reply = kzalloc(sz, GFP_KERNEL); + event_reply = kzalloc(sz, GFP_ATOMIC); if (!event_reply) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index ac326c41e931..6465dae5883a 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1762,12 +1762,31 @@ qla2x00_get_host_port_state(struct Scsi_Host *shost) scsi_qla_host_t *vha = shost_priv(shost); struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev); - if (!base_vha->flags.online) + if (!base_vha->flags.online) { fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; - else if (atomic_read(&base_vha->loop_state) == LOOP_TIMEOUT) - fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; - else + return; + } + + switch (atomic_read(&base_vha->loop_state)) { + case LOOP_UPDATE: + fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS; + break; + case LOOP_DOWN: + if (test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags)) + fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS; + else + fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; + break; + case LOOP_DEAD: + fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; + break; + case LOOP_READY: fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; + break; + default: + fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; + break; + } } static int diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 9df4787715c0..f3cddd5800c3 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -12,17 +12,17 @@ * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- * | Module Init and Probe | 0x0116 | | - * | Mailbox commands | 0x1129 | | + * | Mailbox commands | 0x112b | | * | Device Discovery | 0x2083 | | * | Queue Command and IO tracing | 0x302e | 0x3008 | * | DPC Thread | 0x401c | | * | Async Events | 0x5059 | | - * | Timer Routines | 0x600d | | + * | Timer Routines | 0x6010 | 0x600e,0x600f | * | User Space Interactions | 0x709d | | - * | Task Management | 0x8041 | | + * | Task Management | 0x8041 | 0x800b | * | AER/EEH | 0x900f | | * | Virtual Port | 0xa007 | | - * | ISP82XX Specific | 0xb051 | | + * | ISP82XX Specific | 0xb052 | | * | MultiQ | 0xc00b | | * | Misc | 0xd00b | | * ---------------------------------------------------------------------- diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ce32d8135c9e..c0c11afb685c 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -578,6 +578,7 @@ extern int qla82xx_check_md_needed(scsi_qla_host_t *); extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *); extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int); extern char *qdev_state(uint32_t); +extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *); /* BSG related functions */ extern int qla24xx_bsg_request(struct fc_bsg_job *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f03e915f1877..54ea68cec4c5 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1509,7 +1509,8 @@ enable_82xx_npiv: &ha->fw_xcb_count, NULL, NULL, &ha->max_npiv_vports, NULL); - if (!fw_major_version && ql2xallocfwdump) + if (!fw_major_version && ql2xallocfwdump + && !IS_QLA82XX(ha)) qla2x00_alloc_fw_dump(vha); } } else { diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index dbec89622a0f..a4b267e60a35 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -120,11 +120,10 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha) * Returns a pointer to the continuation type 1 IOCB packet. */ static inline cont_a64_entry_t * -qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha) +qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req) { cont_a64_entry_t *cont_pkt; - struct req_que *req = vha->req; /* Adjust ring index. */ req->ring_index++; if (req->ring_index == req->length) { @@ -292,7 +291,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, * Five DSDs are available in the Continuation * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req); cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; avail_dsds = 5; } @@ -684,7 +683,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, * Five DSDs are available in the Continuation * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req); cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; avail_dsds = 5; } @@ -2070,7 +2069,8 @@ qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb) * Five DSDs are available in the Cont. * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, + vha->hw->req_q_map[0]); cur_dsd = (uint32_t *) cont_pkt->dseg_0_address; avail_dsds = 5; cont_iocb_prsnt = 1; @@ -2096,6 +2096,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) int index; uint16_t tot_dsds; scsi_qla_host_t *vha = sp->fcport->vha; + struct qla_hw_data *ha = vha->hw; struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; int loop_iterartion = 0; int cont_iocb_prsnt = 0; @@ -2141,7 +2142,8 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) * Five DSDs are available in the Cont. * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, + ha->req_q_map[0]); cur_dsd = (uint32_t *) cont_pkt->dseg_0_address; avail_dsds = 5; cont_iocb_prsnt = 1; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 2516adf1aeea..7b91b290ffd6 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1741,7 +1741,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16 | lscsi_status; - break; + goto check_scsi_status; } if (!lscsi_status && diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3b3cec9f6ac2..82a33533ed26 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -79,8 +79,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) mcp->mb[0] = MBS_LINK_DOWN_ERROR; ql_log(ql_log_warn, base_vha, 0x1004, "FW hung = %d.\n", ha->flags.isp82xx_fw_hung); - rval = QLA_FUNCTION_FAILED; - goto premature_exit; + return QLA_FUNCTION_TIMEOUT; } /* @@ -163,6 +162,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) HINT_MBX_INT_PENDING) { spin_unlock_irqrestore(&ha->hardware_lock, flags); + ha->flags.mbox_busy = 0; ql_dbg(ql_dbg_mbx, base_vha, 0x1010, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; @@ -188,6 +188,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) HINT_MBX_INT_PENDING) { spin_unlock_irqrestore(&ha->hardware_lock, flags); + ha->flags.mbox_busy = 0; ql_dbg(ql_dbg_mbx, base_vha, 0x1012, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; @@ -302,7 +303,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) && !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - + if (IS_QLA82XX(ha)) { + ql_dbg(ql_dbg_mbx, vha, 0x112a, + "disabling pause transmit on port " + "0 & 1.\n"); + qla82xx_wr_32(ha, + QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0| + CRB_NIU_XG_PAUSE_CTL_P1); + } ql_log(ql_log_info, base_vha, 0x101c, "Mailbox cmd timeout occured. " "Scheduling ISP abort eeh_busy=0x%x.\n", @@ -318,7 +327,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) && !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - + if (IS_QLA82XX(ha)) { + ql_dbg(ql_dbg_mbx, vha, 0x112b, + "disabling pause transmit on port " + "0 & 1.\n"); + qla82xx_wr_32(ha, + QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0| + CRB_NIU_XG_PAUSE_CTL_P1); + } ql_log(ql_log_info, base_vha, 0x101e, "Mailbox cmd timeout occured. " "Scheduling ISP abort.\n"); diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 94bded5ddce4..03554934b0a5 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3817,6 +3817,20 @@ exit: return rval; } +void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + + if (ha->flags.mbox_busy) { + ha->flags.mbox_int = 1; + ha->flags.mbox_busy = 0; + ql_log(ql_log_warn, vha, 0x6010, + "Doing premature completion of mbx command.\n"); + if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags)) + complete(&ha->mbx_intr_comp); + } +} + void qla82xx_watchdog(scsi_qla_host_t *vha) { uint32_t dev_state, halt_status; @@ -3839,9 +3853,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) qla2xxx_wake_dpc(vha); } else { if (qla82xx_check_fw_alive(vha)) { + ql_dbg(ql_dbg_timer, vha, 0x6011, + "disabling pause transmit on port 0 & 1.\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0|CRB_NIU_XG_PAUSE_CTL_P1); halt_status = qla82xx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); - ql_dbg(ql_dbg_timer, vha, 0x6005, + ql_log(ql_log_info, vha, 0x6005, "dumping hw/fw registers:.\n " " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,.\n " " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,.\n " @@ -3858,6 +3876,11 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) QLA82XX_CRB_PEG_NET_3 + 0x3c), qla82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c)); + if (LSW(MSB(halt_status)) == 0x67) + ql_log(ql_log_warn, vha, 0xb052, + "Firmware aborted with " + "error code 0x00006700. Device is " + "being reset.\n"); if (halt_status & HALT_STATUS_UNRECOVERABLE) { set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags); @@ -3869,16 +3892,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) } qla2xxx_wake_dpc(vha); ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - ql_log(ql_log_warn, vha, 0x6007, - "Due to FW hung, doing " - "premature completion of mbx " - "command.\n"); - if (test_bit(MBX_INTR_WAIT, - &ha->mbx_cmd_flags)) - complete(&ha->mbx_intr_comp); - } + ql_log(ql_log_warn, vha, 0x6007, "Firmware hung.\n"); + qla82xx_clear_pending_mbx(vha); } } } @@ -4073,10 +4088,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) msleep(1000); if (qla82xx_check_fw_alive(vha)) { ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - complete(&ha->mbx_intr_comp); - } + qla82xx_clear_pending_mbx(vha); break; } } diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 57820c199bc2..57a226be339a 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -1173,4 +1173,8 @@ struct qla82xx_md_entry_queue { static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC }; + +#define CRB_NIU_XG_PAUSE_CTL_P0 0x1 +#define CRB_NIU_XG_PAUSE_CTL_P1 0x8 + #endif diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index fd14c7bfc626..f9e5b85e84d8 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -201,12 +201,12 @@ MODULE_PARM_DESC(ql2xmdcapmask, "Set the Minidump driver capture mask level. " "Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F."); -int ql2xmdenable; +int ql2xmdenable = 1; module_param(ql2xmdenable, int, S_IRUGO); MODULE_PARM_DESC(ql2xmdenable, "Enable/disable MiniDump. " - "0 (Default) - MiniDump disabled. " - "1 - MiniDump enabled."); + "0 - MiniDump disabled. " + "1 (Default) - MiniDump enabled."); /* * SCSI host template entry points @@ -423,6 +423,7 @@ fail2: qla25xx_delete_queues(vha); destroy_workqueue(ha->wq); ha->wq = NULL; + vha->req = ha->req_q_map[0]; fail: ha->mqenable = 0; kfree(ha->req_q_map); @@ -814,49 +815,6 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha) return return_status; } -/* - * qla2x00_wait_for_loop_ready - * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop - * to be in LOOP_READY state. - * Input: - * ha - pointer to host adapter structure - * - * Note: - * Does context switching-Release SPIN_LOCK - * (if any) before calling this routine. - * - * - * Return: - * Success (LOOP_READY) : 0 - * Failed (LOOP_NOT_READY) : 1 - */ -static inline int -qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha) -{ - int return_status = QLA_SUCCESS; - unsigned long loop_timeout ; - struct qla_hw_data *ha = vha->hw; - scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); - - /* wait for 5 min at the max for loop to be ready */ - loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); - - while ((!atomic_read(&base_vha->loop_down_timer) && - atomic_read(&base_vha->loop_state) == LOOP_DOWN) || - atomic_read(&base_vha->loop_state) != LOOP_READY) { - if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) { - return_status = QLA_FUNCTION_FAILED; - break; - } - msleep(1000); - if (time_after_eq(jiffies, loop_timeout)) { - return_status = QLA_FUNCTION_FAILED; - break; - } - } - return (return_status); -} - static void sp_get(struct srb *sp) { @@ -1035,12 +993,6 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type, "Wait for hba online failed for cmd=%p.\n", cmd); goto eh_reset_failed; } - err = 1; - if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0x800b, - "Wait for loop ready failed for cmd=%p.\n", cmd); - goto eh_reset_failed; - } err = 2; if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1) != QLA_SUCCESS) { @@ -1137,10 +1089,9 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) goto eh_bus_reset_done; } - if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) { - if (qla2x00_loop_reset(vha) == QLA_SUCCESS) - ret = SUCCESS; - } + if (qla2x00_loop_reset(vha) == QLA_SUCCESS) + ret = SUCCESS; + if (ret == FAILED) goto eh_bus_reset_done; @@ -1206,15 +1157,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS) goto eh_host_reset_lock; - /* - * Fixme-may be dpc thread is active and processing - * loop_resync,so wait a while for it to - * be completed and then issue big hammer.Otherwise - * it may cause I/O failure as big hammer marks the - * devices as lost kicking of the port_down_timer - * while dpc is stuck for the mailbox to complete. - */ - qla2x00_wait_for_loop_ready(vha); if (vha != base_vha) { if (qla2x00_vp_abort_isp(vha)) goto eh_host_reset_lock; @@ -1297,16 +1239,13 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) atomic_set(&vha->loop_state, LOOP_DOWN); atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(vha, 0); - qla2x00_wait_for_loop_ready(vha); } if (ha->flags.enable_lip_reset) { ret = qla2x00_lip_reset(vha); - if (ret != QLA_SUCCESS) { + if (ret != QLA_SUCCESS) ql_dbg(ql_dbg_taskm, vha, 0x802e, "lip_reset failed (%d).\n", ret); - } else - qla2x00_wait_for_loop_ready(vha); } /* Issue marker command only when we are going to start the I/O */ @@ -4070,13 +4009,8 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) /* For ISP82XX complete any pending mailbox cmd */ if (IS_QLA82XX(ha)) { ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - ql_dbg(ql_dbg_aer, vha, 0x9001, - "Due to pci channel io frozen, doing premature " - "completion of mbx command.\n"); - complete(&ha->mbx_intr_comp); - } + ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n"); + qla82xx_clear_pending_mbx(vha); } qla2x00_free_irqs(vha); pci_disable_device(pdev); diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 13b6357c1fa2..23f33a6d52d7 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.07-k" +#define QLA2XXX_VERSION "8.03.07.12-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index ace637bf254e..fd5edc6e166d 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -147,7 +147,7 @@ #define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */ #define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */ -#define QL4_SESS_RECOVERY_TMO 30 /* iSCSI session */ +#define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */ /* recovery timeout */ #define LSDW(x) ((u32)((u64)(x))) @@ -173,6 +173,8 @@ #define ISNS_DEREG_TOV 5 #define HBA_ONLINE_TOV 30 #define DISABLE_ACB_TOV 30 +#define IP_CONFIG_TOV 30 +#define LOGIN_TOV 12 #define MAX_RESET_HA_RETRIES 2 @@ -240,6 +242,45 @@ struct ddb_entry { uint16_t fw_ddb_index; /* DDB firmware index */ uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */ + uint16_t ddb_type; +#define FLASH_DDB 0x01 + + struct dev_db_entry fw_ddb_entry; + int (*unblock_sess)(struct iscsi_cls_session *cls_session); + int (*ddb_change)(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); + + /* Driver Re-login */ + unsigned long flags; /* DDB Flags */ + uint16_t default_relogin_timeout; /* Max time to wait for + * relogin to complete */ + atomic_t retry_relogin_timer; /* Min Time between relogins + * (4000 only) */ + atomic_t relogin_timer; /* Max Time to wait for + * relogin to complete */ + atomic_t relogin_retry_count; /* Num of times relogin has been + * retried */ + uint32_t default_time2wait; /* Default Min time between + * relogins (+aens) */ + +}; + +struct qla_ddb_index { + struct list_head list; + uint16_t fw_ddb_idx; + struct dev_db_entry fw_ddb; +}; + +#define DDB_IPADDR_LEN 64 + +struct ql4_tuple_ddb { + int port; + int tpgt; + char ip_addr[DDB_IPADDR_LEN]; + char iscsi_name[ISCSI_NAME_SIZE]; + uint16_t options; +#define DDB_OPT_IPV6 0x0e0e +#define DDB_OPT_IPV4 0x0f0f }; /* @@ -411,7 +452,7 @@ struct scsi_qla_host { #define AF_FW_RECOVERY 19 /* 0x00080000 */ #define AF_EEH_BUSY 20 /* 0x00100000 */ #define AF_PCI_CHANNEL_IO_PERM_FAILURE 21 /* 0x00200000 */ - +#define AF_BUILD_DDB_LIST 22 /* 0x00400000 */ unsigned long dpc_flags; #define DPC_RESET_HA 1 /* 0x00000002 */ @@ -604,6 +645,7 @@ struct scsi_qla_host { uint16_t bootload_minor; uint16_t bootload_patch; uint16_t bootload_build; + uint16_t def_timeout; /* Default login timeout */ uint32_t flash_state; #define QLFLASH_WAITING 0 @@ -623,6 +665,11 @@ struct scsi_qla_host { uint16_t iscsi_pci_func_cnt; uint8_t model_name[16]; struct completion disable_acb_comp; + struct dma_pool *fw_ddb_dma_pool; +#define DDB_DMA_BLOCK_SIZE 512 + uint16_t pri_ddb_idx; + uint16_t sec_ddb_idx; + int is_reset; }; struct ql4_task_data { @@ -835,6 +882,10 @@ static inline int ql4xxx_reset_active(struct scsi_qla_host *ha) /*---------------------------------------------------------------------------*/ /* Defines for qla4xxx_initialize_adapter() and qla4xxx_recover_adapter() */ + +#define INIT_ADAPTER 0 +#define RESET_ADAPTER 1 + #define PRESERVE_DDB_LIST 0 #define REBUILD_DDB_LIST 1 diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index cbd5a20dbbd1..4ac07f882521 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -12,6 +12,7 @@ #define MAX_PRST_DEV_DB_ENTRIES 64 #define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES #define MAX_DEV_DB_ENTRIES 512 +#define MAX_DEV_DB_ENTRIES_40XX 256 /************************************************************************* * @@ -604,6 +605,13 @@ struct addr_ctrl_blk { uint8_t res14[140]; /* 274-2FF */ }; +#define IP_ADDR_COUNT 4 /* Total 4 IP address supported in one interface + * One IPv4, one IPv6 link local and 2 IPv6 + */ + +#define IP_STATE_MASK 0x0F000000 +#define IP_STATE_SHIFT 24 + struct init_fw_ctrl_blk { struct addr_ctrl_blk pri; /* struct addr_ctrl_blk sec;*/ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 160db9d5ea21..d0dd4b330206 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -13,7 +13,7 @@ struct iscsi_cls_conn; int qla4xxx_hw_reset(struct scsi_qla_host *ha); int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a); int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb); -int qla4xxx_initialize_adapter(struct scsi_qla_host *ha); +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset); int qla4xxx_soft_reset(struct scsi_qla_host *ha); irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id); @@ -153,10 +153,13 @@ int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index, uint32_t *mbx_sts); int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index); int qla4xxx_send_passthru0(struct iscsi_task *task); +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha); int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index, uint16_t stats_size, dma_addr_t stats_dma); void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry); +void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry); int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha, struct dev_db_entry *fw_ddb_entry, dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index); @@ -169,11 +172,22 @@ int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha, uint32_t region, uint32_t field0, uint32_t field1); +int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index); +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset); /* BSG Functions */ int qla4xxx_bsg_request(struct bsg_job *bsg_job); int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job); +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry); + extern int ql4xextended_error_logging; extern int ql4xdontresethba; extern int ql4xenablemsix; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 3075fbaef553..1bdfa8120ac8 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -773,22 +773,24 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha) * be freed so that when login happens from user space there are free DDB * indices available. **/ -static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) { int max_ddbs; int ret; uint32_t idx = 0, next_idx = 0; uint32_t state = 0, conn_err = 0; - max_ddbs = is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES : + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : MAX_DEV_DB_ENTRIES; for (idx = 0; idx < max_ddbs; idx = next_idx) { ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, &next_idx, &state, &conn_err, NULL, NULL); - if (ret == QLA_ERROR) + if (ret == QLA_ERROR) { + next_idx++; continue; + } if (state == DDB_DS_NO_CONNECTION_ACTIVE || state == DDB_DS_SESSION_FAILED) { DEBUG2(ql4_printk(KERN_INFO, ha, @@ -804,7 +806,6 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) } } - /** * qla4xxx_initialize_adapter - initiailizes hba * @ha: Pointer to host adapter structure. @@ -812,7 +813,7 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) * This routine parforms all of the steps necessary to initialize the adapter. * **/ -int qla4xxx_initialize_adapter(struct scsi_qla_host *ha) +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset) { int status = QLA_ERROR; @@ -840,7 +841,8 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha) if (status == QLA_ERROR) goto exit_init_hba; - qla4xxx_free_ddb_index(ha); + if (is_reset == RESET_ADAPTER) + qla4xxx_build_ddb_list(ha, is_reset); set_bit(AF_ONLINE, &ha->flags); exit_init_hba: @@ -855,38 +857,12 @@ exit_init_hba: return status; } -/** - * qla4xxx_process_ddb_changed - process ddb state change - * @ha - Pointer to host adapter structure. - * @fw_ddb_index - Firmware's device database index - * @state - Device state - * - * This routine processes a Decive Database Changed AEN Event. - **/ -int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, - uint32_t state, uint32_t conn_err) +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) { - struct ddb_entry * ddb_entry; uint32_t old_fw_ddb_device_state; int status = QLA_ERROR; - /* check for out of range index */ - if (fw_ddb_index >= MAX_DDB_ENTRIES) - goto exit_ddb_event; - - /* Get the corresponging ddb entry */ - ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); - /* Device does not currently exist in our database. */ - if (ddb_entry == NULL) { - ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", - __func__, fw_ddb_index); - - if (state == DDB_DS_NO_CONNECTION_ACTIVE) - clear_bit(fw_ddb_index, ha->ddb_idx_map); - - goto exit_ddb_event; - } - old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB - old state = 0x%x, new state = 0x%x for " @@ -900,9 +876,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, switch (state) { case DDB_DS_SESSION_ACTIVE: case DDB_DS_DISCOVERY: - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); qla4xxx_update_session_conn_param(ha, ddb_entry); status = QLA_SUCCESS; break; @@ -936,9 +910,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, switch (state) { case DDB_DS_SESSION_ACTIVE: case DDB_DS_DISCOVERY: - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); qla4xxx_update_session_conn_param(ha, ddb_entry); status = QLA_SUCCESS; break; @@ -954,7 +926,198 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, __func__)); break; } + return status; +} + +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry) +{ + /* + * This triggers a relogin. After the relogin_timer + * expires, the relogin gets scheduled. We must wait a + * minimum amount of time since receiving an 0x8014 AEN + * with failed device_state or a logout response before + * we can issue another relogin. + * + * Firmware pads this timeout: (time2wait +1). + * Driver retry to login should be longer than F/W. + * Otherwise F/W will fail + * set_ddb() mbx cmd with 0x4005 since it still + * counting down its time2wait. + */ + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + +} + +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) +{ + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; + + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + case DDB_DS_NO_CONNECTION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; + } + return status; +} + +/** + * qla4xxx_process_ddb_changed - process ddb state change + * @ha - Pointer to host adapter structure. + * @fw_ddb_index - Firmware's device database index + * @state - Device state + * + * This routine processes a Decive Database Changed AEN Event. + **/ +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, + uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_err) +{ + struct ddb_entry *ddb_entry; + int status = QLA_ERROR; + + /* check for out of range index */ + if (fw_ddb_index >= MAX_DDB_ENTRIES) + goto exit_ddb_event; + + /* Get the corresponging ddb entry */ + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); + /* Device does not currently exist in our database. */ + if (ddb_entry == NULL) { + ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", + __func__, fw_ddb_index); + + if (state == DDB_DS_NO_CONNECTION_ACTIVE) + clear_bit(fw_ddb_index, ha->ddb_idx_map); + + goto exit_ddb_event; + } + + ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state); exit_ddb_event: return status; } + +/** + * qla4xxx_login_flash_ddb - Login to target (DDB) + * @cls_session: Pointer to the session to login + * + * This routine logins to the target. + * Issues setddb and conn open mbx + **/ +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + struct dev_db_entry *fw_ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + uint32_t mbx_sts = 0; + int ret; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!test_bit(AF_LINK_UP, &ha->flags)) + return; + + if (ddb_entry->ddb_type != FLASH_DDB) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Skipping login to non FLASH DB")); + goto exit_login; + } + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_login; + } + + if (ddb_entry->fw_ddb_index == INVALID_ENTRY) { + ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) + goto exit_login; + + ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; + ha->tot_ddbs++; + } + + memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry, + sizeof(struct dev_db_entry)); + ddb_entry->sess->target_id = ddb_entry->fw_ddb_index; + + ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, + fw_ddb_dma, &mbx_sts); + if (ret == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n")); + goto exit_login; + } + + ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS; + ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) { + ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__, + sess->targetname); + goto exit_login; + } + +exit_login: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 4c2b84870392..c2593782fbbe 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -41,6 +41,16 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, return status; } + if (is_qla40XX(ha)) { + if (test_bit(AF_HA_REMOVAL, &ha->flags)) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: " + "prematurely completing mbx cmd as " + "adapter removal detected\n", + ha->host_no, __func__)); + return status; + } + } + if (is_qla8022(ha)) { if (test_bit(AF_FW_RECOVERY, &ha->flags)) { DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: " @@ -413,6 +423,7 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, memcpy(ha->name_string, init_fw_cb->iscsi_name, min(sizeof(ha->name_string), sizeof(init_fw_cb->iscsi_name))); + ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout); /*memcpy(ha->alias, init_fw_cb->Alias, min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 30f31b127f33..4169c8baa112 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -8,6 +8,7 @@ #include <linux/slab.h> #include <linux/blkdev.h> #include <linux/iscsi_boot_sysfs.h> +#include <linux/inet.h> #include <scsi/scsi_tcq.h> #include <scsi/scsicam.h> @@ -31,6 +32,13 @@ static struct kmem_cache *srb_cachep; /* * Module parameter information and variables */ +int ql4xdisablesysfsboot = 1; +module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ql4xdisablesysfsboot, + "Set to disable exporting boot targets to sysfs\n" + " 0 - Export boot targets\n" + " 1 - Do not export boot targets (Default)"); + int ql4xdontresethba = 0; module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, @@ -63,7 +71,7 @@ static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; module_param(ql4xsess_recovery_tmo, int, S_IRUGO); MODULE_PARM_DESC(ql4xsess_recovery_tmo, "Target Session Recovery Timeout.\n" - " Default: 30 sec."); + " Default: 120 sec."); static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); /* @@ -415,7 +423,7 @@ static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) qla_ep = ep->dd_data; ha = to_qla_host(qla_ep->host); - if (adapter_up(ha)) + if (adapter_up(ha) && !test_bit(AF_BUILD_DDB_LIST, &ha->flags)) ret = 1; return ret; @@ -975,6 +983,150 @@ static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn, } +int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index) +{ + uint32_t mbx_sts = 0; + uint16_t tmp_ddb_index; + int ret; + +get_ddb_index: + tmp_ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES); + + if (tmp_ddb_index >= MAX_DDB_ENTRIES) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Free DDB index not available\n")); + ret = QLA_ERROR; + goto exit_get_ddb_index; + } + + if (test_and_set_bit(tmp_ddb_index, ha->ddb_idx_map)) + goto get_ddb_index; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Found a free DDB index at %d\n", tmp_ddb_index)); + ret = qla4xxx_req_ddb_entry(ha, tmp_ddb_index, &mbx_sts); + if (ret == QLA_ERROR) { + if (mbx_sts == MBOX_STS_COMMAND_ERROR) { + ql4_printk(KERN_INFO, ha, + "DDB index = %d not available trying next\n", + tmp_ddb_index); + goto get_ddb_index; + } + DEBUG2(ql4_printk(KERN_INFO, ha, + "Free FW DDB not available\n")); + } + + *ddb_index = tmp_ddb_index; + +exit_get_ddb_index: + return ret; +} + +static int qla4xxx_match_ipaddress(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry, + char *existing_ipaddr, + char *user_ipaddr) +{ + uint8_t dst_ipaddr[IPv6_ADDR_LEN]; + char formatted_ipaddr[DDB_IPADDR_LEN]; + int status = QLA_SUCCESS, ret = 0; + + if (ddb_entry->fw_ddb_entry.options & DDB_OPT_IPV6_DEVICE) { + ret = in6_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, + '\0', NULL); + if (ret == 0) { + status = QLA_ERROR; + goto out_match; + } + ret = sprintf(formatted_ipaddr, "%pI6", dst_ipaddr); + } else { + ret = in4_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, + '\0', NULL); + if (ret == 0) { + status = QLA_ERROR; + goto out_match; + } + ret = sprintf(formatted_ipaddr, "%pI4", dst_ipaddr); + } + + if (strcmp(existing_ipaddr, formatted_ipaddr)) + status = QLA_ERROR; + +out_match: + return status; +} + +static int qla4xxx_match_fwdb_session(struct scsi_qla_host *ha, + struct iscsi_cls_conn *cls_conn) +{ + int idx = 0, max_ddbs, rval; + struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn); + struct iscsi_session *sess, *existing_sess; + struct iscsi_conn *conn, *existing_conn; + struct ddb_entry *ddb_entry; + + sess = cls_sess->dd_data; + conn = cls_conn->dd_data; + + if (sess->targetname == NULL || + conn->persistent_address == NULL || + conn->persistent_port == 0) + return QLA_ERROR; + + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + for (idx = 0; idx < max_ddbs; idx++) { + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if (ddb_entry == NULL) + continue; + + if (ddb_entry->ddb_type != FLASH_DDB) + continue; + + existing_sess = ddb_entry->sess->dd_data; + existing_conn = ddb_entry->conn->dd_data; + + if (existing_sess->targetname == NULL || + existing_conn->persistent_address == NULL || + existing_conn->persistent_port == 0) + continue; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "IQN = %s User IQN = %s\n", + existing_sess->targetname, + sess->targetname)); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "IP = %s User IP = %s\n", + existing_conn->persistent_address, + conn->persistent_address)); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Port = %d User Port = %d\n", + existing_conn->persistent_port, + conn->persistent_port)); + + if (strcmp(existing_sess->targetname, sess->targetname)) + continue; + rval = qla4xxx_match_ipaddress(ha, ddb_entry, + existing_conn->persistent_address, + conn->persistent_address); + if (rval == QLA_ERROR) + continue; + if (existing_conn->persistent_port != conn->persistent_port) + continue; + break; + } + + if (idx == max_ddbs) + return QLA_ERROR; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Match found in fwdb sessions\n")); + return QLA_SUCCESS; +} + static struct iscsi_cls_session * qla4xxx_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, @@ -984,8 +1136,7 @@ qla4xxx_session_create(struct iscsi_endpoint *ep, struct scsi_qla_host *ha; struct qla_endpoint *qla_ep; struct ddb_entry *ddb_entry; - uint32_t ddb_index; - uint32_t mbx_sts = 0; + uint16_t ddb_index; struct iscsi_session *sess; struct sockaddr *dst_addr; int ret; @@ -1000,32 +1151,9 @@ qla4xxx_session_create(struct iscsi_endpoint *ep, dst_addr = (struct sockaddr *)&qla_ep->dst_addr; ha = to_qla_host(qla_ep->host); -get_ddb_index: - ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES); - - if (ddb_index >= MAX_DDB_ENTRIES) { - DEBUG2(ql4_printk(KERN_INFO, ha, - "Free DDB index not available\n")); - return NULL; - } - - if (test_and_set_bit(ddb_index, ha->ddb_idx_map)) - goto get_ddb_index; - - DEBUG2(ql4_printk(KERN_INFO, ha, - "Found a free DDB index at %d\n", ddb_index)); - ret = qla4xxx_req_ddb_entry(ha, ddb_index, &mbx_sts); - if (ret == QLA_ERROR) { - if (mbx_sts == MBOX_STS_COMMAND_ERROR) { - ql4_printk(KERN_INFO, ha, - "DDB index = %d not available trying next\n", - ddb_index); - goto get_ddb_index; - } - DEBUG2(ql4_printk(KERN_INFO, ha, - "Free FW DDB not available\n")); + ret = qla4xxx_get_ddb_index(ha, &ddb_index); + if (ret == QLA_ERROR) return NULL; - } cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host, cmds_max, sizeof(struct ddb_entry), @@ -1040,6 +1168,8 @@ get_ddb_index: ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; ddb_entry->ha = ha; ddb_entry->sess = cls_sess; + ddb_entry->unblock_sess = qla4xxx_unblock_ddb; + ddb_entry->ddb_change = qla4xxx_ddb_change; cls_sess->recovery_tmo = ql4xsess_recovery_tmo; ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; ha->tot_ddbs++; @@ -1077,6 +1207,9 @@ qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx) DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_idx); + if (!cls_conn) + return NULL; + sess = cls_sess->dd_data; ddb_entry = sess->dd_data; ddb_entry->conn = cls_conn; @@ -1109,7 +1242,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) struct iscsi_session *sess; struct ddb_entry *ddb_entry; struct scsi_qla_host *ha; - struct dev_db_entry *fw_ddb_entry; + struct dev_db_entry *fw_ddb_entry = NULL; dma_addr_t fw_ddb_entry_dma; uint32_t mbx_sts = 0; int ret = 0; @@ -1120,12 +1253,25 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) ddb_entry = sess->dd_data; ha = ddb_entry->ha; + /* Check if we have matching FW DDB, if yes then do not + * login to this target. This could cause target to logout previous + * connection + */ + ret = qla4xxx_match_fwdb_session(ha, cls_conn); + if (ret == QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, + "Session already exist in FW.\n"); + ret = -EEXIST; + goto exit_conn_start; + } + fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), &fw_ddb_entry_dma, GFP_KERNEL); if (!fw_ddb_entry) { ql4_printk(KERN_ERR, ha, "%s: Unable to allocate dma buffer\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto exit_conn_start; } ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts); @@ -1138,9 +1284,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) if (mbx_sts) if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); goto exit_set_param; } @@ -1167,8 +1311,9 @@ exit_set_param: ret = 0; exit_conn_start: - dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), - fw_ddb_entry, fw_ddb_entry_dma); + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); return ret; } @@ -1344,6 +1489,101 @@ static int qla4xxx_task_xmit(struct iscsi_task *task) return -ENOSYS; } +static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry, + struct iscsi_cls_session *cls_sess, + struct iscsi_cls_conn *cls_conn) +{ + int buflen = 0; + struct iscsi_session *sess; + struct iscsi_conn *conn; + char ip_addr[DDB_IPADDR_LEN]; + uint16_t options = 0; + + sess = cls_sess->dd_data; + conn = cls_conn->dd_data; + + conn->max_recv_dlength = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); + + conn->max_xmit_dlength = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len); + + sess->initial_r2t_en = + (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options)); + + sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t); + + sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options)); + + sess->first_burst = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len); + + sess->max_burst = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len); + + sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); + + sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain); + + conn->persistent_port = le16_to_cpu(fw_ddb_entry->port); + + sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + + options = le16_to_cpu(fw_ddb_entry->options); + if (options & DDB_OPT_IPV6_DEVICE) + sprintf(ip_addr, "%pI6", fw_ddb_entry->ip_addr); + else + sprintf(ip_addr, "%pI4", fw_ddb_entry->ip_addr); + + iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_NAME, + (char *)fw_ddb_entry->iscsi_name, buflen); + iscsi_set_param(cls_conn, ISCSI_PARAM_INITIATOR_NAME, + (char *)ha->name_string, buflen); + iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS, + (char *)ip_addr, buflen); +} + +void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) +{ + struct iscsi_cls_session *cls_sess; + struct iscsi_cls_conn *cls_conn; + uint32_t ddb_state; + dma_addr_t fw_ddb_entry_dma; + struct dev_db_entry *fw_ddb_entry; + + fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + &fw_ddb_entry_dma, GFP_KERNEL); + if (!fw_ddb_entry) { + ql4_printk(KERN_ERR, ha, + "%s: Unable to allocate dma buffer\n", __func__); + goto exit_session_conn_fwddb_param; + } + + if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, + fw_ddb_entry_dma, NULL, NULL, &ddb_state, + NULL, NULL, NULL) == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " + "get_ddb_entry for fw_ddb_index %d\n", + ha->host_no, __func__, + ddb_entry->fw_ddb_index)); + goto exit_session_conn_fwddb_param; + } + + cls_sess = ddb_entry->sess; + + cls_conn = ddb_entry->conn; + + /* Update params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); + +exit_session_conn_fwddb_param: + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); +} + void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { @@ -1360,7 +1600,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, if (!fw_ddb_entry) { ql4_printk(KERN_ERR, ha, "%s: Unable to allocate dma buffer\n", __func__); - return; + goto exit_session_conn_param; } if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, @@ -1370,7 +1610,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, "get_ddb_entry for fw_ddb_index %d\n", ha->host_no, __func__, ddb_entry->fw_ddb_index)); - return; + goto exit_session_conn_param; } cls_sess = ddb_entry->sess; @@ -1379,6 +1619,12 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, cls_conn = ddb_entry->conn; conn = cls_conn->dd_data; + /* Update timers after login */ + ddb_entry->default_relogin_timeout = + le16_to_cpu(fw_ddb_entry->def_timeout); + ddb_entry->default_time2wait = + le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); + /* Update params */ conn->max_recv_dlength = BYTE_UNITS * le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); @@ -1407,6 +1653,11 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, memcpy(sess->initiatorname, ha->name_string, min(sizeof(ha->name_string), sizeof(sess->initiatorname))); + +exit_session_conn_param: + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); } /* @@ -1607,6 +1858,9 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha) vfree(ha->chap_list); ha->chap_list = NULL; + if (ha->fw_ddb_dma_pool) + dma_pool_destroy(ha->fw_ddb_dma_pool); + /* release io space registers */ if (is_qla8022(ha)) { if (ha->nx_pcibase) @@ -1689,6 +1943,16 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha) goto mem_alloc_error_exit; } + ha->fw_ddb_dma_pool = dma_pool_create("ql4_fw_ddb", &ha->pdev->dev, + DDB_DMA_BLOCK_SIZE, 8, 0); + + if (ha->fw_ddb_dma_pool == NULL) { + ql4_printk(KERN_WARNING, ha, + "%s: fw_ddb_dma_pool allocation failed..\n", + __func__); + goto mem_alloc_error_exit; + } + return QLA_SUCCESS; mem_alloc_error_exit: @@ -1800,6 +2064,60 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } } +void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!(ddb_entry->ddb_type == FLASH_DDB)) + return; + + if (adapter_up(ha) && !test_bit(DF_RELOGIN, &ddb_entry->flags) && + !iscsi_is_session_online(cls_sess)) { + if (atomic_read(&ddb_entry->retry_relogin_timer) != + INVALID_ENTRY) { + if (atomic_read(&ddb_entry->retry_relogin_timer) == + 0) { + atomic_set(&ddb_entry->retry_relogin_timer, + INVALID_ENTRY); + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: index [%d] login device\n", + __func__, ddb_entry->fw_ddb_index)); + } else + atomic_dec(&ddb_entry->retry_relogin_timer); + } + } + + /* Wait for relogin to timeout */ + if (atomic_read(&ddb_entry->relogin_timer) && + (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) { + /* + * If the relogin times out and the device is + * still NOT ONLINE then try and relogin again. + */ + if (!iscsi_is_session_online(cls_sess)) { + /* Reset retry relogin timer */ + atomic_inc(&ddb_entry->relogin_retry_count); + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: index[%d] relogin timed out-retrying" + " relogin (%d), retry (%d)\n", __func__, + ddb_entry->fw_ddb_index, + atomic_read(&ddb_entry->relogin_retry_count), + ddb_entry->default_time2wait + 4)); + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + } + } +} + /** * qla4xxx_timer - checks every second for work to do. * @ha: Pointer to host adapter structure. @@ -1809,6 +2127,8 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) int start_dpc = 0; uint16_t w; + iscsi_host_for_each_session(ha->host, qla4xxx_check_relogin_flash_ddb); + /* If we are in the middle of AER/EEH processing * skip any processing and reschedule the timer */ @@ -2078,7 +2398,12 @@ static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session) sess = cls_session->dd_data; ddb_entry = sess->dd_data; ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED; - iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED); + + if (ddb_entry->ddb_type == FLASH_DDB) + iscsi_block_session(ddb_entry->sess); + else + iscsi_session_failure(cls_session->dd_data, + ISCSI_ERR_CONN_FAILED); } /** @@ -2163,7 +2488,7 @@ recover_ha_init_adapter: /* NOTE: AF_ONLINE flag set upon successful completion of * qla4xxx_initialize_adapter */ - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); } /* Retry failed adapter initialization, if necessary @@ -2245,17 +2570,108 @@ static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session) iscsi_unblock_session(ddb_entry->sess); } else { /* Trigger relogin */ - iscsi_session_failure(cls_session->dd_data, - ISCSI_ERR_CONN_FAILED); + if (ddb_entry->ddb_type == FLASH_DDB) { + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + } else + iscsi_session_failure(cls_session->dd_data, + ISCSI_ERR_CONN_FAILED); } } } +int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " unblock session\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + + iscsi_unblock_session(ddb_entry->sess); + + /* Start scan target */ + if (test_bit(AF_ONLINE, &ha->flags)) { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " start scan\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + scsi_queue_work(ha->host, &ddb_entry->sess->scan_work); + } + return QLA_SUCCESS; +} + +int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " unblock user space session\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + iscsi_conn_start(ddb_entry->conn); + iscsi_conn_login_event(ddb_entry->conn, + ISCSI_CONN_STATE_LOGGED_IN); + + return QLA_SUCCESS; +} + static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha) { iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices); } +static void qla4xxx_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +{ + uint16_t relogin_timer; + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + relogin_timer = max(ddb_entry->default_relogin_timeout, + (uint16_t)RELOGIN_TOV); + atomic_set(&ddb_entry->relogin_timer, relogin_timer); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no, + ddb_entry->fw_ddb_index, relogin_timer)); + + qla4xxx_login_flash_ddb(cls_sess); +} + +static void qla4xxx_dpc_relogin(struct iscsi_cls_session *cls_sess) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!(ddb_entry->ddb_type == FLASH_DDB)) + return; + + if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) && + !iscsi_is_session_online(cls_sess)) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "relogin issued\n")); + qla4xxx_relogin_flash_ddb(cls_sess); + } +} + void qla4xxx_wake_dpc(struct scsi_qla_host *ha) { if (ha->dpc_thread) @@ -2356,6 +2772,12 @@ dpc_post_reset_ha: if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) qla4xxx_get_dhcp_ip_address(ha); + /* ---- relogin device? --- */ + if (adapter_up(ha) && + test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) { + iscsi_host_for_each_session(ha->host, qla4xxx_dpc_relogin); + } + /* ---- link change? --- */ if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) { if (!test_bit(AF_LINK_UP, &ha->flags)) { @@ -2368,8 +2790,12 @@ dpc_post_reset_ha: * fatal error recovery. Therefore, the driver must * manually relogin to devices when recovering from * connection failures, logouts, expired KATO, etc. */ - - qla4xxx_relogin_all_devices(ha); + if (test_and_clear_bit(AF_BUILD_DDB_LIST, &ha->flags)) { + qla4xxx_build_ddb_list(ha, ha->is_reset); + iscsi_host_for_each_session(ha->host, + qla4xxx_login_flash_ddb); + } else + qla4xxx_relogin_all_devices(ha); } } } @@ -2867,6 +3293,9 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) " target ID %d\n", __func__, ddb_index[0], ddb_index[1])); + ha->pri_ddb_idx = ddb_index[0]; + ha->sec_ddb_idx = ddb_index[1]; + exit_boot_info_free: dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); exit_boot_info: @@ -3034,6 +3463,9 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha) return ret; } + if (ql4xdisablesysfsboot) + return QLA_SUCCESS; + if (ddb_index[0] == 0xffff) goto sec_target; @@ -3066,7 +3498,15 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) struct iscsi_boot_kobj *boot_kobj; if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS) - return 0; + return QLA_ERROR; + + if (ql4xdisablesysfsboot) { + ql4_printk(KERN_INFO, ha, + "%s: syfsboot disabled - driver will trigger login" + "and publish session for discovery .\n", __func__); + return QLA_SUCCESS; + } + ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no); if (!ha->boot_kset) @@ -3108,7 +3548,7 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) if (!boot_kobj) goto put_host; - return 0; + return QLA_SUCCESS; put_host: scsi_host_put(ha->host); @@ -3174,9 +3614,507 @@ static void qla4xxx_create_chap_list(struct scsi_qla_host *ha) exit_chap_list: dma_free_coherent(&ha->pdev->dev, chap_size, chap_flash_data, chap_dma); - return; } +static void qla4xxx_get_param_ddb(struct ddb_entry *ddb_entry, + struct ql4_tuple_ddb *tddb) +{ + struct scsi_qla_host *ha; + struct iscsi_cls_session *cls_sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_session *sess; + struct iscsi_conn *conn; + + DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); + ha = ddb_entry->ha; + cls_sess = ddb_entry->sess; + sess = cls_sess->dd_data; + cls_conn = ddb_entry->conn; + conn = cls_conn->dd_data; + + tddb->tpgt = sess->tpgt; + tddb->port = conn->persistent_port; + strncpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE); + strncpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN); +} + +static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry, + struct ql4_tuple_ddb *tddb) +{ + uint16_t options = 0; + + tddb->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(&tddb->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], + min(sizeof(tddb->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); + + options = le16_to_cpu(fw_ddb_entry->options); + if (options & DDB_OPT_IPV6_DEVICE) + sprintf(tddb->ip_addr, "%pI6", fw_ddb_entry->ip_addr); + else + sprintf(tddb->ip_addr, "%pI4", fw_ddb_entry->ip_addr); + + tddb->port = le16_to_cpu(fw_ddb_entry->port); +} + +static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, + struct ql4_tuple_ddb *old_tddb, + struct ql4_tuple_ddb *new_tddb) +{ + if (strcmp(old_tddb->iscsi_name, new_tddb->iscsi_name)) + return QLA_ERROR; + + if (strcmp(old_tddb->ip_addr, new_tddb->ip_addr)) + return QLA_ERROR; + + if (old_tddb->port != new_tddb->port) + return QLA_ERROR; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Match Found, fw[%d,%d,%s,%s], [%d,%d,%s,%s]", + old_tddb->port, old_tddb->tpgt, old_tddb->ip_addr, + old_tddb->iscsi_name, new_tddb->port, new_tddb->tpgt, + new_tddb->ip_addr, new_tddb->iscsi_name)); + + return QLA_SUCCESS; +} + +static int qla4xxx_is_session_exists(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry) +{ + struct ddb_entry *ddb_entry; + struct ql4_tuple_ddb *fw_tddb = NULL; + struct ql4_tuple_ddb *tmp_tddb = NULL; + int idx; + int ret = QLA_ERROR; + + fw_tddb = vzalloc(sizeof(*fw_tddb)); + if (!fw_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + tmp_tddb = vzalloc(sizeof(*tmp_tddb)); + if (!tmp_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); + + for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if (ddb_entry == NULL) + continue; + + qla4xxx_get_param_ddb(ddb_entry, tmp_tddb); + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + ret = QLA_SUCCESS; /* found */ + goto exit_check; + } + } + +exit_check: + if (fw_tddb) + vfree(fw_tddb); + if (tmp_tddb) + vfree(tmp_tddb); + return ret; +} + +static int qla4xxx_is_flash_ddb_exists(struct scsi_qla_host *ha, + struct list_head *list_nt, + struct dev_db_entry *fw_ddb_entry) +{ + struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + struct ql4_tuple_ddb *fw_tddb = NULL; + struct ql4_tuple_ddb *tmp_tddb = NULL; + int ret = QLA_ERROR; + + fw_tddb = vzalloc(sizeof(*fw_tddb)); + if (!fw_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + tmp_tddb = vzalloc(sizeof(*tmp_tddb)); + if (!tmp_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); + + list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { + qla4xxx_convert_param_ddb(&nt_ddb_idx->fw_ddb, tmp_tddb); + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + ret = QLA_SUCCESS; /* found */ + goto exit_check; + } + } + +exit_check: + if (fw_tddb) + vfree(fw_tddb); + if (tmp_tddb) + vfree(tmp_tddb); + return ret; +} + +static void qla4xxx_free_nt_list(struct list_head *list_nt) +{ + struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + + /* Free up the normaltargets list */ + list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { + list_del_init(&nt_ddb_idx->list); + vfree(nt_ddb_idx); + } + +} + +static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry) +{ + struct iscsi_endpoint *ep; + struct sockaddr_in *addr; + struct sockaddr_in6 *addr6; + struct sockaddr *dst_addr; + char *ip; + + /* TODO: need to destroy on unload iscsi_endpoint*/ + dst_addr = vmalloc(sizeof(*dst_addr)); + if (!dst_addr) + return NULL; + + if (fw_ddb_entry->options & DDB_OPT_IPV6_DEVICE) { + dst_addr->sa_family = AF_INET6; + addr6 = (struct sockaddr_in6 *)dst_addr; + ip = (char *)&addr6->sin6_addr; + memcpy(ip, fw_ddb_entry->ip_addr, IPv6_ADDR_LEN); + addr6->sin6_port = htons(le16_to_cpu(fw_ddb_entry->port)); + + } else { + dst_addr->sa_family = AF_INET; + addr = (struct sockaddr_in *)dst_addr; + ip = (char *)&addr->sin_addr; + memcpy(ip, fw_ddb_entry->ip_addr, IP_ADDR_LEN); + addr->sin_port = htons(le16_to_cpu(fw_ddb_entry->port)); + } + + ep = qla4xxx_ep_connect(ha->host, dst_addr, 0); + vfree(dst_addr); + return ep; +} + +static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx) +{ + if (ql4xdisablesysfsboot) + return QLA_SUCCESS; + if (idx == ha->pri_ddb_idx || idx == ha->sec_ddb_idx) + return QLA_ERROR; + return QLA_SUCCESS; +} + +static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) +{ + ddb_entry->ddb_type = FLASH_DDB; + ddb_entry->fw_ddb_index = INVALID_ENTRY; + ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; + ddb_entry->ha = ha; + ddb_entry->unblock_sess = qla4xxx_unblock_flash_ddb; + ddb_entry->ddb_change = qla4xxx_flash_ddb_change; + + atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->relogin_retry_count, 0); + + ddb_entry->default_relogin_timeout = + le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); + ddb_entry->default_time2wait = + le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait); +} + +static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) +{ + uint32_t idx = 0; + uint32_t ip_idx[IP_ADDR_COUNT] = {0, 1, 2, 3}; /* 4 IP interfaces */ + uint32_t sts[MBOX_REG_COUNT]; + uint32_t ip_state; + unsigned long wtime; + int ret; + + wtime = jiffies + (HZ * IP_CONFIG_TOV); + do { + for (idx = 0; idx < IP_ADDR_COUNT; idx++) { + if (ip_idx[idx] == -1) + continue; + + ret = qla4xxx_get_ip_state(ha, 0, ip_idx[idx], sts); + + if (ret == QLA_ERROR) { + ip_idx[idx] = -1; + continue; + } + + ip_state = (sts[1] & IP_STATE_MASK) >> IP_STATE_SHIFT; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Waiting for IP state for idx = %d, state = 0x%x\n", + ip_idx[idx], ip_state)); + if (ip_state == IP_ADDRSTATE_UNCONFIGURED || + ip_state == IP_ADDRSTATE_INVALID || + ip_state == IP_ADDRSTATE_PREFERRED || + ip_state == IP_ADDRSTATE_DEPRICATED || + ip_state == IP_ADDRSTATE_DISABLING) + ip_idx[idx] = -1; + + } + + /* Break if all IP states checked */ + if ((ip_idx[0] == -1) && + (ip_idx[1] == -1) && + (ip_idx[2] == -1) && + (ip_idx[3] == -1)) + break; + schedule_timeout_uninterruptible(HZ); + } while (time_after(wtime, jiffies)); +} + +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +{ + int max_ddbs; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + uint16_t conn_id; + struct dev_db_entry *fw_ddb_entry; + struct ddb_entry *ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + struct iscsi_cls_session *cls_sess; + struct iscsi_session *sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_endpoint *ep; + uint16_t cmds_max = 32, tmo = 0; + uint32_t initial_cmdsn = 0; + struct list_head list_st, list_nt; /* List of sendtargets */ + struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; + int fw_idx_size; + unsigned long wtime; + struct qla_ddb_index *nt_ddb_idx; + + if (!test_bit(AF_LINK_UP, &ha->flags)) { + set_bit(AF_BUILD_DDB_LIST, &ha->flags); + ha->is_reset = is_reset; + return; + } + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_ddb_list; + } + + INIT_LIST_HEAD(&list_st); + INIT_LIST_HEAD(&list_nt); + fw_idx_size = sizeof(struct qla_ddb_index); + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, + fw_ddb_dma, NULL, + &next_idx, &state, &conn_err, + NULL, &conn_id); + if (ret == QLA_ERROR) + break; + + if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) + goto continue_next_st; + + /* Check if ST, add to the list_st */ + if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) + goto continue_next_st; + + st_ddb_idx = vzalloc(fw_idx_size); + if (!st_ddb_idx) + break; + + st_ddb_idx->fw_ddb_idx = idx; + + list_add_tail(&st_ddb_idx->list, &list_st); +continue_next_st: + if (next_idx == 0) + break; + } + + /* Before issuing conn open mbox, ensure all IPs states are configured + * Note, conn open fails if IPs are not configured + */ + qla4xxx_wait_for_ip_configuration(ha); + + /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + } + + /* Wait to ensure all sendtargets are done for min 12 sec wait */ + tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout); + DEBUG2(ql4_printk(KERN_INFO, ha, + "Default time to wait for build ddb %d\n", tmo)); + + wtime = jiffies + (HZ * tmo); + do { + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, + list) { + ret = qla4xxx_get_fwddb_entry(ha, + st_ddb_idx->fw_ddb_idx, + NULL, 0, NULL, &next_idx, + &state, &conn_err, NULL, + NULL); + if (ret == QLA_ERROR) + continue; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + list_del_init(&st_ddb_idx->list); + vfree(st_ddb_idx); + } + } + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(wtime, jiffies)); + + /* Free up the sendtargets list */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + list_del_init(&st_ddb_idx->list); + vfree(st_ddb_idx); + } + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, + fw_ddb_dma, NULL, + &next_idx, &state, &conn_err, + NULL, &conn_id); + if (ret == QLA_ERROR) + break; + + if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) + goto continue_next_nt; + + /* Check if NT, then add to list it */ + if (strlen((char *) fw_ddb_entry->iscsi_name) == 0) + goto continue_next_nt; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Adding DDB to session = 0x%x\n", + idx)); + if (is_reset == INIT_ADAPTER) { + nt_ddb_idx = vmalloc(fw_idx_size); + if (!nt_ddb_idx) + break; + + nt_ddb_idx->fw_ddb_idx = idx; + + memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + if (qla4xxx_is_flash_ddb_exists(ha, &list_nt, + fw_ddb_entry) == QLA_SUCCESS) { + vfree(nt_ddb_idx); + goto continue_next_nt; + } + list_add_tail(&nt_ddb_idx->list, &list_nt); + } else if (is_reset == RESET_ADAPTER) { + if (qla4xxx_is_session_exists(ha, + fw_ddb_entry) == QLA_SUCCESS) + goto continue_next_nt; + } + + /* Create session object, with INVALID_ENTRY, + * the targer_id would get set when we issue the login + */ + cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, + ha->host, cmds_max, + sizeof(struct ddb_entry), + sizeof(struct ql4_task_data), + initial_cmdsn, INVALID_ENTRY); + if (!cls_sess) + goto exit_ddb_list; + + /* + * iscsi_session_setup increments the driver reference + * count which wouldn't let the driver to be unloaded. + * so calling module_put function to decrement the + * reference count. + **/ + module_put(qla4xxx_iscsi_transport.owner); + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ddb_entry->sess = cls_sess; + + cls_sess->recovery_tmo = ql4xsess_recovery_tmo; + memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); + + cls_conn = iscsi_conn_setup(cls_sess, + sizeof(struct qla_conn), + conn_id); + if (!cls_conn) + goto exit_ddb_list; + + ddb_entry->conn = cls_conn; + + /* Setup ep, for displaying attributes in sysfs */ + ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); + if (ep) { + ep->conn = cls_conn; + cls_conn->ep = ep; + } else { + DEBUG2(ql4_printk(KERN_ERR, ha, + "Unable to get ep\n")); + } + + /* Update sess/conn params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, + cls_conn); + + if (is_reset == RESET_ADAPTER) { + iscsi_block_session(cls_sess); + /* Use the relogin path to discover new devices + * by short-circuting the logic of setting + * timer to relogin - instead set the flags + * to initiate login right away. + */ + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); + } + } +continue_next_nt: + if (next_idx == 0) + break; + } +exit_ddb_list: + qla4xxx_free_nt_list(&list_nt); + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); + + qla4xxx_free_ddb_index(ha); +} + + /** * qla4xxx_probe_adapter - callback function to probe HBA * @pdev: pointer to pci_dev structure @@ -3298,7 +4236,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, * firmware * NOTE: interrupts enabled upon successful completion */ - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); while ((!test_bit(AF_ONLINE, &ha->flags)) && init_retry_count++ < MAX_INIT_RETRIES) { @@ -3319,7 +4257,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, if (ha->isp_ops->reset_chip(ha) == QLA_ERROR) continue; - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); } if (!test_bit(AF_ONLINE, &ha->flags)) { @@ -3386,12 +4324,16 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->host_no, ha->firmware_version[0], ha->firmware_version[1], ha->patch_number, ha->build_number); - qla4xxx_create_chap_list(ha); - if (qla4xxx_setup_boot_info(ha)) ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n", __func__); + /* Perform the build ddb list and login to each */ + qla4xxx_build_ddb_list(ha, INIT_ADAPTER); + iscsi_host_for_each_session(ha->host, qla4xxx_login_flash_ddb); + + qla4xxx_create_chap_list(ha); + qla4xxx_create_ifaces(ha); return 0; @@ -3449,6 +4391,38 @@ static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha) } } +static void qla4xxx_destroy_fw_ddb_session(struct scsi_qla_host *ha) +{ + struct ddb_entry *ddb_entry; + int options; + int idx; + + for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { + + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if ((ddb_entry != NULL) && + (ddb_entry->ddb_type == FLASH_DDB)) { + + options = LOGOUT_OPTION_CLOSE_SESSION; + if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) + == QLA_ERROR) + ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", + __func__); + + qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index); + /* + * we have decremented the reference count of the driver + * when we setup the session to have the driver unload + * to be seamless without actually destroying the + * session + **/ + try_module_get(qla4xxx_iscsi_transport.owner); + iscsi_destroy_endpoint(ddb_entry->conn->ep); + qla4xxx_free_ddb(ha, ddb_entry); + iscsi_session_teardown(ddb_entry->sess); + } + } +} /** * qla4xxx_remove_adapter - calback function to remove adapter. * @pci_dev: PCI device pointer @@ -3465,9 +4439,11 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) /* destroy iface from sysfs */ qla4xxx_destroy_ifaces(ha); - if (ha->boot_kset) + if ((!ql4xdisablesysfsboot) && ha->boot_kset) iscsi_boot_destroy_kset(ha->boot_kset); + qla4xxx_destroy_fw_ddb_session(ha); + scsi_remove_host(ha->host); qla4xxx_free_adapter(ha); @@ -4115,7 +5091,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) qla4_8xxx_idc_unlock(ha); clear_bit(AF_FW_RECOVERY, &ha->flags); - rval = qla4xxx_initialize_adapter(ha); + rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); qla4_8xxx_idc_lock(ha); if (rval != QLA_SUCCESS) { @@ -4151,7 +5127,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) == QLA82XX_DEV_READY)) { clear_bit(AF_FW_RECOVERY, &ha->flags); - rval = qla4xxx_initialize_adapter(ha); + rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); if (rval == QLA_SUCCESS) { ret = qla4xxx_request_irqs(ha); if (ret) { diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index c15347d3f532..5254e57968f5 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k8" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k9" diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 019a7163572f..dcf7e1006426 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -971,6 +971,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) struct s3c64xx_spi_info *sci; struct spi_master *master; int ret; + char clk_name[16]; if (pdev->id < 0) { dev_err(&pdev->dev, @@ -984,11 +985,6 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) } sci = pdev->dev.platform_data; - if (!sci->src_clk_name) { - dev_err(&pdev->dev, - "Board init must call s3c64xx_spi_set_info()\n"); - return -EINVAL; - } /* Check for availability of necessary resource */ @@ -1073,17 +1069,17 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err4; } - sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr); + sdd->src_clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(sdd->src_clk)) { dev_err(&pdev->dev, - "Unable to acquire clock '%s'\n", sci->src_clk_name); + "Unable to acquire clock '%s'\n", clk_name); ret = PTR_ERR(sdd->src_clk); goto err5; } if (clk_enable(sdd->src_clk)) { - dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", - sci->src_clk_name); + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name); ret = -EBUSY; goto err6; } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 925a1e547a83..fb89b85d0d81 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -457,7 +457,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 + default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs @@ -465,7 +465,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 + default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help Select the number of available UART ports for the Samsung S3C @@ -495,47 +495,6 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index e10cf5b54b6d..84bc2e5a57be 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -39,11 +39,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c deleted file mode 100644 index b1d7e7c1849d..000000000000 --- a/drivers/tty/serial/s3c2410.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c deleted file mode 100644 index 2234bf9ced45..000000000000 --- a/drivers/tty/serial/s3c2412.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c deleted file mode 100644 index 1d0c324b813f..000000000000 --- a/drivers/tty/serial/s3c2440.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c deleted file mode 100644 index e2f6913d84d5..000000000000 --- a/drivers/tty/serial/s3c6400.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c deleted file mode 100644 index 8b0b888a1b76..000000000000 --- a/drivers/tty/serial/s5pv210.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/delay.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <plat/regs-serial.h> -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - /* It is need to delay When reset FIFO register */ - udelay(1); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index b31f1c3a2c4c..f96f37b5fec6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -42,6 +42,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> #include <asm/irq.h> @@ -49,6 +50,7 @@ #include <mach/map.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include "samsung.h" @@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) { + struct s3c24xx_uart_port *ourport; + if (port->dev == NULL) return NULL; - return (struct s3c2410_uartcfg *)port->dev->platform_data; + ourport = container_of(port, struct s3c24xx_uart_port, port); + return ourport->cfg; } static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, @@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, struct s3c24xx_uart_info *info = ourport->info; if (ufstat & info->rx_fifofull) - return info->fifosize; + return ourport->port.fifosize; return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; } @@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, * */ +#define MAX_CLK_NAME_LENGTH 15 -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +static inline int s3c24xx_serial_getsource(struct uart_port *port) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + if (info->num_clks == 1) + return 0; - return (info->set_clksrc)(port, c); + ucon = rd_regl(port, S3C2410_UCON); + ucon &= info->clksel_mask; + return ucon >> info->clksel_shift; } -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) +static void s3c24xx_serial_setsource(struct uart_port *port, + unsigned int clk_sel) { - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - calc->clksrc = clksrc; + if (info->num_clks == 1) + return; - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } + ucon = rd_regl(port, S3C2410_UCON); + if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) + return; - calc->quot--; - return 1; + ucon &= ~info->clksel_mask; + ucon |= clk_sel << info->clksel_shift; + wr_regl(port, S3C2410_UCON, ucon); } -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) +static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, + unsigned int req_baud, struct clk **best_clk, + unsigned int *clk_num) { - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk + struct s3c24xx_uart_info *info = ourport->info; + struct clk *clk; + unsigned long rate; + unsigned int cnt, baud, quot, clk_sel, best_quot = 0; + char clkname[MAX_CLK_NAME_LENGTH]; + int calc_deviation, deviation = (1 << 30) - 1; + + *best_clk = NULL; + clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : + ourport->info->def_clk_sel; + for (cnt = 0; cnt < info->num_clks; cnt++) { + if (!(clk_sel & (1 << cnt))) + continue; + + sprintf(clkname, "clk_uart_baud%d", cnt); + clk = clk_get(ourport->port.dev, clkname); + if (IS_ERR_OR_NULL(clk)) + continue; + + rate = clk_get_rate(clk); + if (!rate) + continue; + + if (ourport->info->has_divslot) { + unsigned long div = rate / req_baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we + * calculated by not multiplying the baud by 16) as it + * is easy enough to recalculate. */ - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; + quot = div / 16; + baud = rate / div; + } else { + quot = (rate + (8 * req_baud)) / (16 * req_baud); + baud = rate / (quot * 16); } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; + quot--; - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; + calc_deviation = req_baud - baud; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } + if (calc_deviation < deviation) { + *best_clk = clk; + best_quot = quot; + *clk_num = cnt; + deviation = calc_deviation; } } - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; + return best_quot; } /* udivslot_table[] @@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; struct clk *clk = NULL; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, clk_sel = 0; unsigned int ulcon; unsigned int umcon; unsigned int udivslot = 0; @@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, */ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - + quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + if (!clk) + return; /* check to see if we need to change clock source */ - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); + if (ourport->baudclk != clk) { + s3c24xx_serial_setsource(port, clk_sel); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); @@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, clk_enable(clk); - ourport->clksrc = clksrc; ourport->baudclk = clk; ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } @@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS /* s3c24xx_serial_resetport * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) + * reset the fifos and other the settings. */ -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) +static void s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned int ucon_mask; + + ucon_mask = info->clksel_mask; + if (info->type == PORT_S3C2440) + ucon_mask |= S3C2440_UCON0_DIVMASK; - return (info->reset_port)(port, cfg); + ucon &= ucon_mask; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + /* some delay is required after fifo reset */ + udelay(1); } @@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p */ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, struct platform_device *platdev) { struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; + struct s3c2410_uartcfg *cfg = ourport->cfg; struct resource *res; int ret; @@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (platdev == NULL) return -ENODEV; - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - if (port->mapbase != 0) return 0; - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - /* setup info for port */ port->dev = &platdev->dev; - ourport->info = info; /* Startup sequence is different for s3c64xx and higher SoC's */ if (s3c24xx_serial_has_interrupt_mask(port)) s3c24xx_serial_ops.startup = s3c64xx_serial_startup; - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - port->uartclk = 1; if (cfg->uart_flags & UPF_CONS_FLOW) { @@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name); } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + /* Device driver serial port probe */ +static const struct of_device_id s3c24xx_uart_dt_match[]; static int probe_index; -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) +static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); + return (struct s3c24xx_serial_drv_data *)match->data; + } +#endif + return (struct s3c24xx_serial_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_serial_probe(struct platform_device *pdev) { struct s3c24xx_uart_port *ourport; int ret; - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index); ourport = &s3c24xx_serial_ports[probe_index]; + + ourport->drv_data = s3c24xx_get_driver_data(pdev); + if (!ourport->drv_data) { + dev_err(&pdev->dev, "could not find driver data\n"); + return -ENODEV; + } + + ourport->info = ourport->drv_data->info; + ourport->cfg = (pdev->dev.platform_data) ? + (struct s3c2410_uartcfg *)pdev->dev.platform_data : + ourport->drv_data->def_cfg; + + ourport->port.fifosize = (ourport->info->fifosize) ? + ourport->info->fifosize : + ourport->drv_data->fifosize[probe_index]; + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); - ret = s3c24xx_serial_init_port(ourport, info, dev); + ret = s3c24xx_serial_init_port(ourport, pdev); if (ret < 0) goto probe_err; dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); + platform_set_drvdata(pdev, &ourport->port); - ret = device_create_file(&dev->dev, &dev_attr_clock_source); + ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + dev_err(&pdev->dev, "failed to add clock source attr.\n"); ret = s3c24xx_serial_cpufreq_register(ourport); if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); return 0; @@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev, return ret; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) +static int __devexit s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev) return 0; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - /* UART power management code */ #ifdef CONFIG_PM_SLEEP static int s3c24xx_serial_suspend(struct device *dev) @@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { #define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - - drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - /* Console code */ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE @@ -1395,12 +1331,13 @@ static void __init s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { - struct s3c24xx_uart_clksrc clksrc; struct clk *clk; unsigned int ulcon; unsigned int ucon; unsigned int ubrdiv; unsigned long rate; + unsigned int clk_sel; + char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON); ucon = rd_regl(port, S3C2410_UCON); @@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, /* now calculate the baud rate */ - s3c24xx_serial_getsource(port, &clksrc); + clk_sel = s3c24xx_serial_getsource(port); + sprintf(clk_name, "clk_uart_baud%d", clk_sel); - clk = clk_get(port->dev, clksrc.name); + clk = clk_get(port->dev, clk_name); if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; + rate = clk_get_rate(clk); else rate = 1; - *baud = rate / (16 * (ubrdiv + 1)); dbg("calculated baud %d\n", *baud); } } -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - static int __init s3c24xx_serial_console_setup(struct console *co, char *options) { @@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - static struct console s3c24xx_serial_console = { .name = S3C24XX_SERIAL_NAME, .device = uart_console_device, @@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = { .setup = s3c24xx_serial_console_setup, .data = &s3c24xx_uart_drv, }; +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) +#ifdef CONFIG_CPU_S3C2410 +static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S3C2410_UCON_CLKMASK, + .clksel_shift = S3C2410_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#else +#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#else +#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - dbg("s3c24xx_serial_initconsole\n"); +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ + defined(CONFIG_CPU_S3C2443) +static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#else +#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - /* select driver based on the cpu */ +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \ + defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \ + defined(CONFIG_CPU_S5PC100) +static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C6400_UCON_CLKMASK, + .clksel_shift = S3C6400_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#else +#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } +#ifdef CONFIG_CPU_S5PV210 +static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S5PV210 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S5PV210_UCON_CLKMASK, + .clksel_shift = S5PV210_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#else +#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; +#ifdef CONFIG_CPU_EXYNOS4210 +static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung Exynos4 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#else +#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); +static struct platform_device_id s3c24xx_serial_driver_ids[] = { + { + .name = "s3c2410-uart", + .driver_data = S3C2410_SERIAL_DRV_DATA, + }, { + .name = "s3c2412-uart", + .driver_data = S3C2412_SERIAL_DRV_DATA, + }, { + .name = "s3c2440-uart", + .driver_data = S3C2440_SERIAL_DRV_DATA, + }, { + .name = "s3c6400-uart", + .driver_data = S3C6400_SERIAL_DRV_DATA, + }, { + .name = "s5pv210-uart", + .driver_data = S5PV210_SERIAL_DRV_DATA, + }, { + .name = "exynos4210-uart", + .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); - register_console(&s3c24xx_serial_console); - return 0; +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,exynos4210-uart", + .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); +#else +#define s3c24xx_uart_dt_match NULL +#endif + +static struct platform_driver samsung_serial_driver = { + .probe = s3c24xx_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .id_table = s3c24xx_serial_driver_ids, + .driver = { + .name = "samsung-uart", + .owner = THIS_MODULE, + .pm = SERIAL_SAMSUNG_PM_OPS, + .of_match_table = s3c24xx_uart_dt_match, + }, +}; + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return platform_driver_register(&samsung_serial_driver); } -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); +MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 8e87b788e5c6..1a4bca3e4179 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -19,20 +19,25 @@ struct s3c24xx_uart_info { unsigned long tx_fifomask; unsigned long tx_fifoshift; unsigned long tx_fifofull; + unsigned int def_clk_sel; + unsigned long num_clks; + unsigned long clksel_mask; + unsigned long clksel_shift; /* uart port features */ unsigned int has_divslot:1; - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - /* uart controls */ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); }; +struct s3c24xx_serial_drv_data { + struct s3c24xx_uart_info *info; + struct s3c2410_uartcfg *def_cfg; + unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; +}; + struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -43,10 +48,13 @@ struct s3c24xx_uart_port { unsigned int tx_irq; struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + struct s3c24xx_serial_drv_data *drv_data; + + /* reference to platform data */ + struct s3c2410_uartcfg *cfg; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; @@ -56,7 +64,6 @@ struct s3c24xx_uart_port { /* conversion functions */ #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) /* register access controls */ @@ -69,17 +76,6 @@ struct s3c24xx_uart_port { #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG extern void printascii(const char *); diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 717ebc9ff941..600d82348511 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,7 +264,7 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) ret = -ENODEV; goto err0; } - dwc->revision = reg & DWC3_GSNPSREV_MASK; + dwc->revision = reg; dwc3_core_soft_reset(dwc); diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 8efe0fa9228d..1ed56d8492d7 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1748,7 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev) /* rm9200 needs manual D+ pullup; off by default */ if (cpu_is_at91rm9200()) { - if (udc->board.pullup_pin <= 0) { + if (gpio_is_valid(udc->board.pullup_pin)) { DBG("no D+ pullup?\n"); retval = -ENODEV; goto fail0; @@ -1815,7 +1815,7 @@ static int __init at91udc_probe(struct platform_device *pdev) DBG("request irq %d failed\n", udc->udp_irq); goto fail1; } - if (udc->board.vbus_pin > 0) { + if (gpio_is_valid(udc->board.vbus_pin)) { retval = gpio_request(udc->board.vbus_pin, "udc_vbus"); if (retval < 0) { DBG("request vbus pin failed\n"); @@ -1859,10 +1859,10 @@ static int __init at91udc_probe(struct platform_device *pdev) INFO("%s version %s\n", driver_name, DRIVER_VERSION); return 0; fail4: - if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled) + if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled) free_irq(udc->board.vbus_pin, udc); fail3: - if (udc->board.vbus_pin > 0) + if (gpio_is_valid(udc->board.vbus_pin)) gpio_free(udc->board.vbus_pin); fail2: free_irq(udc->udp_irq, udc); @@ -1897,7 +1897,7 @@ static int __exit at91udc_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); - if (udc->board.vbus_pin > 0) { + if (gpio_is_valid(udc->board.vbus_pin)) { free_irq(udc->board.vbus_pin, udc); gpio_free(udc->board.vbus_pin); } @@ -1941,7 +1941,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) enable_irq_wake(udc->udp_irq); udc->active_suspend = wake; - if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake) + if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled && wake) enable_irq_wake(udc->board.vbus_pin); return 0; } @@ -1951,7 +1951,7 @@ static int at91udc_resume(struct platform_device *pdev) struct at91_udc *udc = platform_get_drvdata(pdev); unsigned long flags; - if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && + if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled && udc->active_suspend) disable_irq_wake(udc->board.vbus_pin); diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 596a0b464e61..4dff83d2f265 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -130,9 +130,6 @@ ep_matches ( num_req_streams = ep_comp->bmAttributes & 0x1f; if (num_req_streams > ep->max_streams) return 0; - /* Update the ep_comp descriptor if needed */ - if (num_req_streams != ep->max_streams) - ep_comp->bmAttributes = ep->max_streams; } } diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index a7dc1e1d45f2..2ac4ac2e4ef9 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -18,7 +18,7 @@ #include "isp1760-hcd.h" -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) #include <linux/slab.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -31,7 +31,7 @@ #include <linux/pci.h> #endif -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) struct isp1760 { struct usb_hcd *hcd; int rst_gpio; @@ -437,7 +437,7 @@ static int __init isp1760_init(void) ret = platform_driver_register(&isp1760_plat_driver); if (!ret) any_ret = 0; -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) ret = platform_driver_register(&isp1760_of_driver); if (!ret) any_ret = 0; @@ -457,7 +457,7 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { platform_driver_unregister(&isp1760_plat_driver); -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) platform_driver_unregister(&isp1760_of_driver); #endif #ifdef CONFIG_PCI diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 95a9fec38e89..5df0b0e3392b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -223,7 +223,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (port < 0 || port >= 2) return; - if (pdata->vbus_pin[port] <= 0) + if (!gpio_is_valid(pdata->vbus_pin[port])) return; gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); @@ -234,7 +234,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (port < 0 || port >= 2) return -EINVAL; - if (pdata->vbus_pin[port] <= 0) + if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; @@ -465,7 +465,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { - if (pdata->vbus_pin[i] <= 0) + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio_request(pdata->vbus_pin[i], "ohci_vbus"); ohci_at91_usb_set_power(pdata, i, 1); @@ -474,7 +474,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { int ret; - if (pdata->overcurrent_pin[i] <= 0) + if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent"); @@ -499,14 +499,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) if (pdata) { for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { - if (pdata->vbus_pin[i] <= 0) + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; ohci_at91_usb_set_power(pdata, i, 0); gpio_free(pdata->vbus_pin[i]); } for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { - if (pdata->overcurrent_pin[i] <= 0) + if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev); gpio_free(pdata->overcurrent_pin[i]); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 60ddba8066ea..79cb0af779fa 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -774,6 +774,10 @@ static void musb_ep_program(struct musb *musb, u8 epnum, if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else if (can_bulk_split(musb, qh->type)) + musb_writew(epio, MUSB_TXMAXP, packet_sz + | ((hw_ep->max_packet_sz_tx / + packet_sz) - 1) << 11); else musb_writew(epio, MUSB_TXMAXP, qh->maxpacket | diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index 87445b2d72a7..00562566ef5f 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -35,6 +35,11 @@ #define DRV_NAME "AT91SAM9 Watchdog" +#define wdt_read(field) \ + __raw_readl(at91wdt_private.base + field) +#define wdt_write(field, val) \ + __raw_writel((val), at91wdt_private.base + field) + /* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, * use this to convert a watchdog * value from/to milliseconds. @@ -63,6 +68,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " static void at91_ping(unsigned long data); static struct { + void __iomem *base; unsigned long next_heartbeat; /* the next_heartbeat for the timer */ unsigned long open; char expect_close; @@ -77,7 +83,7 @@ static struct { */ static inline void at91_wdt_reset(void) { - at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); + wdt_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); } /* @@ -132,7 +138,7 @@ static int at91_wdt_settimeout(unsigned int timeout) unsigned int mr; /* Check if disabled */ - mr = at91_sys_read(AT91_WDT_MR); + mr = wdt_read(AT91_WDT_MR); if (mr & AT91_WDT_WDDIS) { printk(KERN_ERR DRV_NAME": sorry, watchdog is disabled\n"); return -EIO; @@ -149,7 +155,7 @@ static int at91_wdt_settimeout(unsigned int timeout) | AT91_WDT_WDDBGHLT /* disabled in debug mode */ | AT91_WDT_WDD /* restart at any time */ | (timeout & AT91_WDT_WDV); /* timer value */ - at91_sys_write(AT91_WDT_MR, reg); + wdt_write(AT91_WDT_MR, reg); return 0; } @@ -248,12 +254,22 @@ static struct miscdevice at91wdt_miscdev = { static int __init at91wdt_probe(struct platform_device *pdev) { + struct resource *r; int res; if (at91wdt_miscdev.parent) return -EBUSY; at91wdt_miscdev.parent = &pdev->dev; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + at91wdt_private.base = ioremap(r->start, resource_size(r)); + if (!at91wdt_private.base) { + dev_err(&pdev->dev, "failed to map registers, aborting.\n"); + return -ENOMEM; + } + /* Set watchdog */ res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000)); if (res) diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h index 757f9cab5c82..c6fbb2e6c41b 100644 --- a/drivers/watchdog/at91sam9_wdt.h +++ b/drivers/watchdog/at91sam9_wdt.h @@ -16,11 +16,11 @@ #ifndef AT91_WDT_H #define AT91_WDT_H -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ +#define AT91_WDT_CR 0x00 /* Watchdog Control Register */ #define AT91_WDT_WDRSTT (1 << 0) /* Restart */ #define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ +#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */ #define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ #define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ #define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ @@ -30,7 +30,7 @@ #define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ #define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ +#define AT91_WDT_SR 0x08 /* Watchdog Status Register */ #define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ #define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 03f449a430d2..5b89f7d6cd0f 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -76,8 +76,6 @@ static int irq; static void __iomem *virtbase; static unsigned long coh901327_users; static unsigned long boot_status; -static u16 wdogenablestore; -static u16 irqmaskstore; static struct device *parent; /* @@ -461,6 +459,10 @@ out: } #ifdef CONFIG_PM + +static u16 wdogenablestore; +static u16 irqmaskstore; + static int coh901327_suspend(struct platform_device *pdev, pm_message_t state) { irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U; diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 3774c9b8dac9..8464ea1c36a1 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -231,6 +231,7 @@ static int __devinit cru_detect(unsigned long map_entry, cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE; + set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE)); asminline_call(&cmn_regs, bios32_entrypoint); if (cmn_regs.u1.ral != 0) { @@ -248,8 +249,10 @@ static int __devinit cru_detect(unsigned long map_entry, if ((physical_bios_base + physical_bios_offset)) { cru_rom_addr = ioremap(cru_physical_address, cru_length); - if (cru_rom_addr) + if (cru_rom_addr) { + set_memory_x((unsigned long)cru_rom_addr, cru_length); retval = 0; + } } printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n", diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index ba6ad662635a..99796c5d913d 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -384,10 +384,10 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static int turn_SMI_watchdog_clear_off = 0; +static int turn_SMI_watchdog_clear_off = 1; module_param(turn_SMI_watchdog_clear_off, int, 0); MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, - "Turn off SMI clearing watchdog (default=0)"); + "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); /* * Some TCO specific functions @@ -813,7 +813,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, ret = -EIO; goto out_unmap; } - if (turn_SMI_watchdog_clear_off) { + if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) { /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ val32 = inl(SMI_EN); val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index cc2cfbe33b30..bfaf9bb1ee0d 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -351,7 +351,7 @@ static int __devexit sp805_wdt_remove(struct amba_device *adev) return 0; } -static struct amba_id sp805_wdt_ids[] __initdata = { +static struct amba_id sp805_wdt_ids[] = { { .id = 0x00141805, .mask = 0x00ffffff, diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index b3b8f2f3ad10..ede860f921df 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -621,15 +621,6 @@ static struct xenbus_watch *find_watch(const char *token) return NULL; } -static void xs_reset_watches(void) -{ - int err; - - err = xs_error(xs_single(XBT_NIL, XS_RESET_WATCHES, "", NULL)); - if (err && err != -EEXIST) - printk(KERN_WARNING "xs_reset_watches failed: %d\n", err); -} - /* Register callback to watch this node. */ int register_xenbus_watch(struct xenbus_watch *watch) { @@ -906,9 +897,5 @@ int xs_init(void) if (IS_ERR(task)) return PTR_ERR(task); - /* shutdown watches for kexec boot */ - if (xen_hvm_domain()) - xs_reset_watches(); - return 0; } |