diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 798 insertions, 847 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 64854d76f529..1af04bdeaf0c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -739,13 +739,16 @@ static void hub_tt_work(struct work_struct *work) int limit = 100; spin_lock_irqsave (&hub->tt.lock, flags); - while (--limit && !list_empty (&hub->tt.clear_list)) { + while (!list_empty(&hub->tt.clear_list)) { struct list_head *next; struct usb_tt_clear *clear; struct usb_device *hdev = hub->hdev; const struct hc_driver *drv; int status; + if (!hub->quiescing && --limit < 0) + break; + next = hub->tt.clear_list.next; clear = list_entry (next, struct usb_tt_clear, clear_list); list_del (&clear->clear_list); @@ -1210,7 +1213,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); if (hub->tt.hub) - cancel_work_sync(&hub->tt.clear_work); + flush_work(&hub->tt.clear_work); } /* caller has locked the hub device */ diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 43ac7482fa91..c009263a47e3 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -2069,8 +2069,10 @@ static irqreturn_t net2272_irq(int irq, void *_dev) #if defined(PLX_PCI_RDK2) /* see if PCI int for us by checking irqstat */ intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); - if (!intcsr & (1 << NET2272_PCI_IRQ)) + if (!intcsr & (1 << NET2272_PCI_IRQ)) { + spin_unlock(&dev->lock); return IRQ_NONE; + } /* check dma interrupts */ #endif /* Platform/devcice interrupt handler */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 966d1484ee79..39f9e4a9a2d3 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -545,7 +545,14 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { /* Pegatron Lucid (Ordissimo AIRIS) */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "M11JB"), - DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"), + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), + }, + }, + { + /* Pegatron Lucid (Ordissimo) */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"), + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), }, }, { } diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 4b436f5a4171..5f3a7c74aa8d 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -544,7 +544,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, int i; /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; - struct xhci_slot_ctx *slot_ctx; dma_addr_t dma = ctx->dma; int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); @@ -570,7 +569,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma); } - slot_ctx = xhci_get_slot_ctx(xhci, ctx); xhci_dbg_slot_ctx(xhci, ctx); xhci_dbg_ep_ctx(xhci, ctx, last_ep); } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index aa90ad4d4fd5..a686cf4905bb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -151,9 +151,8 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } - memset(&desc->u.ss.DeviceRemovable, - (__force __u16) cpu_to_le16(port_removable), - sizeof(__u16)); + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); } static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, @@ -809,11 +808,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); + spin_unlock_irqrestore(&xhci->lock, flags); temp = usb_acpi_power_manageable(hcd->self.root_hub, wIndex); if (temp) usb_acpi_set_power_state(hcd->self.root_hub, wIndex, true); + spin_lock_irqsave(&xhci->lock, flags); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); @@ -917,11 +918,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_writel(xhci, temp & ~PORT_POWER, port_array[wIndex]); + spin_unlock_irqrestore(&xhci->lock, flags); temp = usb_acpi_power_manageable(hcd->self.root_hub, wIndex); if (temp) usb_acpi_set_power_state(hcd->self.root_hub, wIndex, false); + spin_lock_irqsave(&xhci->lock, flags); break; default: goto error; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c6ebb176dc4f..4e1a8946b8d1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1228,6 +1228,17 @@ static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, xhci->cmd_ring->dequeue, &cycle_state); + if (!cur_seg) { + xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n", + xhci->cmd_ring->dequeue, + (unsigned long long) + xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, + xhci->cmd_ring->dequeue)); + xhci_debug_ring(xhci, xhci->cmd_ring); + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); + return; + } + /* find the command trb matched by cd from command ring */ for (cmd_trb = xhci->cmd_ring->dequeue; cmd_trb != xhci->cmd_ring->enqueue; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7d462bf20092..c9e419f29b74 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1627,7 +1627,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_hcd *xhci; struct xhci_container_ctx *in_ctx, *out_ctx; unsigned int ep_index; - struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u32 added_ctxs; @@ -1663,7 +1662,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, out_ctx = virt_dev->out_ctx; ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); /* If this endpoint is already in use, and the upper layers are trying * to add it again without dropping it, reject the addition. @@ -1817,6 +1815,8 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, case COMP_EBADSLT: dev_warn(&udev->dev, "WARN: slot not enabled for" "evaluate context command.\n"); + ret = -EINVAL; + break; case COMP_CTX_STATE: dev_warn(&udev->dev, "WARN: invalid context state for " "evaluate context command.\n"); @@ -4021,7 +4021,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) static unsigned long long xhci_service_interval_to_ns( struct usb_endpoint_descriptor *desc) { - return (1 << (desc->bInterval - 1)) * 125 * 1000; + return (1ULL << (desc->bInterval - 1)) * 125 * 1000; } static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, @@ -4142,7 +4142,7 @@ static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev, (xhci_service_interval_to_ns(desc) > timeout_ns)) timeout_ns = xhci_service_interval_to_ns(desc); - u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000; + u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL; if (u2_del_ns > timeout_ns) timeout_ns = u2_del_ns; diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c index 4223d761223d..6589268a6515 100644 --- a/drivers/usb/misc/ezusb.c +++ b/drivers/usb/misc/ezusb.c @@ -158,3 +158,4 @@ int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, } EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 444346e1e10d..ff5f112053d2 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -458,11 +458,11 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct platform_device *musb; struct resource *res; struct resource resources[2]; - char res_name[10]; + char res_name[11]; int ret, musbid; /* get memory resource */ - sprintf(res_name, "musb%d", id); + snprintf(res_name, sizeof(res_name), "musb%d", id); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); if (!res) { dev_err(dev, "%s get mem resource failed\n", res_name); @@ -473,7 +473,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) resources[0] = *res; /* get irq resource */ - sprintf(res_name, "musb%d-irq", id); + snprintf(res_name, sizeof(res_name), "musb%d-irq", id); res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); if (!res) { dev_err(dev, "%s get irq resource failed\n", res_name); @@ -530,7 +530,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); - sprintf(res_name, "port%d-mode", id); + snprintf(res_name, sizeof(res_name), "port%d-mode", id); of_property_read_u32(np, res_name, (u32 *)&pdata->mode); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 143c4e9e1be4..c021b202c0f3 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -795,6 +795,7 @@ static void xfer_work(struct work_struct *work) dev_dbg(dev, " %s %d (%d/ %d)\n", fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); + usbhs_pipe_enable(pipe); usbhsf_dma_start(pipe, fifo); dma_async_issue_pending(chan); } diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 9b69a1323294..069cd765400c 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -334,6 +334,11 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv, struct device *dev = usbhs_priv_to_dev(priv); unsigned long flags; + if (unlikely(!uep)) { + dev_err(dev, "no uep\n"); + return; + } + /******************** spin lock ********************/ usbhs_lock(priv, flags); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index e9c7046ae355..d255f66e708e 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -242,13 +242,11 @@ out: kfree(buffer); return r; } -/* allocate private data */ -static int ch341_attach(struct usb_serial *serial) +static int ch341_port_probe(struct usb_serial_port *port) { struct ch341_private *priv; int r; - /* private data */ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -258,17 +256,27 @@ static int ch341_attach(struct usb_serial *serial) priv->baud_rate = DEFAULT_BAUD_RATE; priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; - r = ch341_configure(serial->dev, priv); + r = ch341_configure(port->serial->dev, priv); if (r < 0) goto error; - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); return 0; error: kfree(priv); return r; } +static int ch341_port_remove(struct usb_serial_port *port) +{ + struct ch341_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + static int ch341_carrier_raised(struct usb_serial_port *port) { struct ch341_private *priv = usb_get_serial_port_data(port); @@ -304,7 +312,7 @@ static void ch341_close(struct usb_serial_port *port) static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); + struct ch341_private *priv = usb_get_serial_port_data(port); int r; priv->baud_rate = DEFAULT_BAUD_RATE; @@ -608,7 +616,8 @@ static struct usb_serial_driver ch341_device = { .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, .read_int_callback = ch341_read_int_callback, - .attach = ch341_attach, + .port_probe = ch341_port_probe, + .port_remove = ch341_port_remove, .reset_resume = ch341_reset_resume, }; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index c86f68c6b078..b50fa1c6d885 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -244,6 +244,8 @@ static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_disconnect(struct usb_serial *serial); static void digi_release(struct usb_serial *serial); +static int digi_port_probe(struct usb_serial_port *port); +static int digi_port_remove(struct usb_serial_port *port); static void digi_read_bulk_callback(struct urb *urb); static int digi_read_inb_callback(struct urb *urb); static int digi_read_oob_callback(struct urb *urb); @@ -294,6 +296,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .attach = digi_startup, .disconnect = digi_disconnect, .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, }; static struct usb_serial_driver digi_acceleport_4_device = { @@ -320,6 +324,8 @@ static struct usb_serial_driver digi_acceleport_4_device = { .attach = digi_startup, .disconnect = digi_disconnect, .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -1240,59 +1246,50 @@ static int digi_startup_device(struct usb_serial *serial) return ret; } - -static int digi_startup(struct usb_serial *serial) +static int digi_port_init(struct usb_serial_port *port, unsigned port_num) { - - int i; struct digi_port *priv; - struct digi_serial *serial_priv; - /* allocate the private data structures for all ports */ - /* number of regular ports + 1 for the out-of-band port */ - for (i = 0; i < serial->type->num_ports + 1; i++) { - /* allocate port private structure */ - priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL); - if (priv == NULL) { - while (--i >= 0) - kfree(usb_get_serial_port_data(serial->port[i])); - return 1; /* error */ - } + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - /* initialize port private structure */ - spin_lock_init(&priv->dp_port_lock); - priv->dp_port_num = i; - priv->dp_out_buf_len = 0; - priv->dp_write_urb_in_use = 0; - priv->dp_modem_signals = 0; - init_waitqueue_head(&priv->dp_modem_change_wait); - priv->dp_transmit_idle = 0; - init_waitqueue_head(&priv->dp_transmit_idle_wait); - priv->dp_throttled = 0; - priv->dp_throttle_restart = 0; - init_waitqueue_head(&priv->dp_flush_wait); - init_waitqueue_head(&priv->dp_close_wait); - INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); - priv->dp_port = serial->port[i]; - /* initialize write wait queue for this port */ - init_waitqueue_head(&serial->port[i]->write_wait); - - usb_set_serial_port_data(serial->port[i], priv); - } + spin_lock_init(&priv->dp_port_lock); + priv->dp_port_num = port_num; + init_waitqueue_head(&priv->dp_modem_change_wait); + init_waitqueue_head(&priv->dp_transmit_idle_wait); + init_waitqueue_head(&priv->dp_flush_wait); + init_waitqueue_head(&priv->dp_close_wait); + INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); + priv->dp_port = port; - /* allocate serial private structure */ - serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL); - if (serial_priv == NULL) { - for (i = 0; i < serial->type->num_ports + 1; i++) - kfree(usb_get_serial_port_data(serial->port[i])); - return 1; /* error */ - } + init_waitqueue_head(&port->write_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int digi_startup(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + int ret; + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; - /* initialize serial private structure */ spin_lock_init(&serial_priv->ds_serial_lock); serial_priv->ds_oob_port_num = serial->type->num_ports; serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; - serial_priv->ds_device_started = 0; + + ret = digi_port_init(serial_priv->ds_oob_port, + serial_priv->ds_oob_port_num); + if (ret) { + kfree(serial_priv); + return ret; + } + usb_set_serial_data(serial, serial_priv); return 0; @@ -1313,15 +1310,35 @@ static void digi_disconnect(struct usb_serial *serial) static void digi_release(struct usb_serial *serial) { - int i; + struct digi_serial *serial_priv; + struct digi_port *priv; + + serial_priv = usb_get_serial_data(serial); + + priv = usb_get_serial_port_data(serial_priv->ds_oob_port); + kfree(priv); - /* free the private data structures for all ports */ - /* number of regular ports + 1 for the out-of-band port */ - for (i = 0; i < serial->type->num_ports + 1; i++) - kfree(usb_get_serial_port_data(serial->port[i])); - kfree(usb_get_serial_data(serial)); + kfree(serial_priv); } +static int digi_port_probe(struct usb_serial_port *port) +{ + unsigned port_num; + + port_num = port->number - port->serial->minor; + + return digi_port_init(port, port_num); +} + +static int digi_port_remove(struct usb_serial_port *port) +{ + struct digi_port *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} static void digi_read_bulk_callback(struct urb *urb) { diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 20a132ec39e2..4264821a3b34 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -203,8 +203,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } -/* fake probe - only to allocate data structures */ -static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id) +static int ipw_attach(struct usb_serial *serial) { struct usb_wwan_intf_private *data; @@ -303,9 +302,9 @@ static struct usb_serial_driver ipw_device = { .num_ports = 1, .open = ipw_open, .close = ipw_close, - .probe = ipw_probe, - .attach = usb_wwan_startup, + .attach = ipw_attach, .release = ipw_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 29c943d737d0..7179b0c5f814 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1374,13 +1374,9 @@ static struct callbacks { data in device_details */ static void keyspan_setup_urbs(struct usb_serial *serial) { - int i, j; struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - struct usb_serial_port *port; - struct keyspan_port_private *p_priv; struct callbacks *cback; - int endp; s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -1404,45 +1400,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial) (serial, d_details->glocont_endpoint, USB_DIR_OUT, serial, s_priv->glocont_buf, GLOCONT_BUFLEN, cback->glocont_callback); - - /* Setup endpoints for each port specific thing */ - for (i = 0; i < d_details->num_ports; i++) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - - /* Do indat endpoints first, once for each flip */ - endp = d_details->indat_endpoints[i]; - for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) { - p_priv->in_urbs[j] = keyspan_setup_urb - (serial, endp, USB_DIR_IN, port, - p_priv->in_buffer[j], 64, - cback->indat_callback); - } - for (; j < 2; ++j) - p_priv->in_urbs[j] = NULL; - - /* outdat endpoints also have flip */ - endp = d_details->outdat_endpoints[i]; - for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) { - p_priv->out_urbs[j] = keyspan_setup_urb - (serial, endp, USB_DIR_OUT, port, - p_priv->out_buffer[j], 64, - cback->outdat_callback); - } - for (; j < 2; ++j) - p_priv->out_urbs[j] = NULL; - - /* inack endpoint */ - p_priv->inack_urb = keyspan_setup_urb - (serial, d_details->inack_endpoints[i], USB_DIR_IN, - port, p_priv->inack_buffer, 1, cback->inack_callback); - - /* outcont endpoint */ - p_priv->outcont_urb = keyspan_setup_urb - (serial, d_details->outcont_endpoints[i], USB_DIR_OUT, - port, p_priv->outcont_buffer, 64, - cback->outcont_callback); - } } /* usa19 function doesn't require prescaler */ @@ -2407,9 +2364,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) static int keyspan_startup(struct usb_serial *serial) { int i, err; - struct usb_serial_port *port; struct keyspan_serial_private *s_priv; - struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) @@ -2432,19 +2387,6 @@ static int keyspan_startup(struct usb_serial *serial) s_priv->device_details = d_details; usb_set_serial_data(serial, s_priv); - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - p_priv = kzalloc(sizeof(struct keyspan_port_private), - GFP_KERNEL); - if (!p_priv) { - dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i); - return 1; - } - p_priv->device_details = d_details; - usb_set_serial_port_data(port, p_priv); - } - keyspan_setup_urbs(serial); if (s_priv->instat_urb != NULL) { @@ -2463,59 +2405,112 @@ static int keyspan_startup(struct usb_serial *serial) static void keyspan_disconnect(struct usb_serial *serial) { - int i, j; - struct usb_serial_port *port; - struct keyspan_serial_private *s_priv; - struct keyspan_port_private *p_priv; + struct keyspan_serial_private *s_priv; s_priv = usb_get_serial_data(serial); - /* Stop reading/writing urbs */ stop_urb(s_priv->instat_urb); stop_urb(s_priv->glocont_urb); stop_urb(s_priv->indat_urb); - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - stop_urb(p_priv->inack_urb); - stop_urb(p_priv->outcont_urb); - for (j = 0; j < 2; j++) { - stop_urb(p_priv->in_urbs[j]); - stop_urb(p_priv->out_urbs[j]); - } - } +} + +static void keyspan_release(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); - /* Now free them */ usb_free_urb(s_priv->instat_urb); usb_free_urb(s_priv->indat_urb); usb_free_urb(s_priv->glocont_urb); - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - usb_free_urb(p_priv->inack_urb); - usb_free_urb(p_priv->outcont_urb); - for (j = 0; j < 2; j++) { - usb_free_urb(p_priv->in_urbs[j]); - usb_free_urb(p_priv->out_urbs[j]); - } - } + + kfree(s_priv); } -static void keyspan_release(struct usb_serial *serial) +static int keyspan_port_probe(struct usb_serial_port *port) { - int i; - struct usb_serial_port *port; - struct keyspan_serial_private *s_priv; + struct usb_serial *serial = port->serial; + struct keyspan_port_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + int endp; + int port_num; + int i; s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; - kfree(s_priv); + p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); + if (!p_priv) + return -ENOMEM; - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); + s_priv = usb_get_serial_data(port->serial); + p_priv->device_details = d_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + port_num = port->number - port->serial->minor; + + /* Do indat endpoints first, once for each flip */ + endp = d_details->indat_endpoints[port_num]; + for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { + p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_IN, port, + p_priv->in_buffer[i], 64, + cback->indat_callback); + } + /* outdat endpoints also have flip */ + endp = d_details->outdat_endpoints[port_num]; + for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { + p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_OUT, port, + p_priv->out_buffer[i], 64, + cback->outdat_callback); + } + /* inack endpoint */ + p_priv->inack_urb = keyspan_setup_urb(serial, + d_details->inack_endpoints[port_num], + USB_DIR_IN, port, + p_priv->inack_buffer, 1, + cback->inack_callback); + /* outcont endpoint */ + p_priv->outcont_urb = keyspan_setup_urb(serial, + d_details->outcont_endpoints[port_num], + USB_DIR_OUT, port, + p_priv->outcont_buffer, 64, + cback->outcont_callback); + + usb_set_serial_port_data(port, p_priv); + + return 0; +} + +static int keyspan_port_remove(struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + int i; + + p_priv = usb_get_serial_port_data(port); + + stop_urb(p_priv->inack_urb); + stop_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); + } + + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + usb_free_urb(p_priv->in_urbs[i]); + usb_free_urb(p_priv->out_urbs[i]); } + + kfree(p_priv); + + return 0; } MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 0a8a40b5711e..0273dda303a4 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -42,6 +42,8 @@ static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); static void keyspan_disconnect (struct usb_serial *serial); static void keyspan_release (struct usb_serial *serial); +static int keyspan_port_probe(struct usb_serial_port *port); +static int keyspan_port_remove(struct usb_serial_port *port); static int keyspan_write_room (struct tty_struct *tty); static int keyspan_write (struct tty_struct *tty, @@ -567,6 +569,8 @@ static struct usb_serial_driver keyspan_1port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_2port_device = { @@ -589,6 +593,8 @@ static struct usb_serial_driver keyspan_2port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_4port_device = { @@ -611,6 +617,8 @@ static struct usb_serial_driver keyspan_4port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index f3947712e137..8a2081004107 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -49,7 +49,8 @@ * Function prototypes */ static int mct_u232_startup(struct usb_serial *serial); -static void mct_u232_release(struct usb_serial *serial); +static int mct_u232_port_probe(struct usb_serial_port *port); +static int mct_u232_port_remove(struct usb_serial_port *remove); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); static void mct_u232_close(struct usb_serial_port *port); static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); @@ -99,7 +100,8 @@ static struct usb_serial_driver mct_u232_device = { .tiocmget = mct_u232_tiocmget, .tiocmset = mct_u232_tiocmset, .attach = mct_u232_startup, - .release = mct_u232_release, + .port_probe = mct_u232_port_probe, + .port_remove = mct_u232_port_remove, .ioctl = mct_u232_ioctl, .get_icount = mct_u232_get_icount, }; @@ -388,18 +390,8 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port, static int mct_u232_startup(struct usb_serial *serial) { - struct mct_u232_private *priv; struct usb_serial_port *port, *rport; - priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL); - if (!priv) - return -ENOMEM; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->msr_wait); - usb_set_serial_port_data(serial->port[0], priv); - - init_waitqueue_head(&serial->port[0]->write_wait); - /* Puh, that's dirty */ port = serial->port[0]; rport = serial->port[1]; @@ -412,18 +404,31 @@ static int mct_u232_startup(struct usb_serial *serial) return 0; } /* mct_u232_startup */ +static int mct_u232_port_probe(struct usb_serial_port *port) +{ + struct mct_u232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->msr_wait); + + usb_set_serial_port_data(port, priv); -static void mct_u232_release(struct usb_serial *serial) + return 0; +} + +static int mct_u232_port_remove(struct usb_serial_port *port) { struct mct_u232_private *priv; - int i; - for (i = 0; i < serial->num_ports; ++i) { - /* My special items, the standard routines free my urbs */ - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } -} /* mct_u232_release */ + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) { @@ -515,12 +520,14 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) static void mct_u232_close(struct usb_serial_port *port) { - if (port->serial->dev) { - /* shutdown our urbs */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - } + /* + * Must kill the read urb as it is actually an interrupt urb, which + * generic close thus fails to kill. + */ + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + usb_serial_generic_close(port); } /* mct_u232_close */ diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 0b257ddffbdb..6f29c74eb769 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -179,16 +179,13 @@ static void metrousb_cleanup(struct usb_serial_port *port) { dev_dbg(&port->dev, "%s\n", __func__); - if (port->serial->dev) { - /* Shutdown any interrupt in urbs. */ - if (port->interrupt_in_urb) { - usb_unlink_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_in_urb); - } - - /* Send deactivate cmd to device */ + usb_unlink_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); - } + mutex_unlock(&port->serial->disc_mutex); } static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -271,51 +268,27 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr return retval; } -static void metrousb_shutdown(struct usb_serial *serial) +static int metrousb_port_probe(struct usb_serial_port *port) { - int i = 0; + struct metrousb_private *metro_priv; - dev_dbg(&serial->dev->dev, "%s\n", __func__); + metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL); + if (!metro_priv) + return -ENOMEM; - /* Stop reading and writing on all ports. */ - for (i = 0; i < serial->num_ports; ++i) { - /* Close any open urbs. */ - metrousb_cleanup(serial->port[i]); + spin_lock_init(&metro_priv->lock); - /* Free memory. */ - kfree(usb_get_serial_port_data(serial->port[i])); - usb_set_serial_port_data(serial->port[i], NULL); + usb_set_serial_port_data(port, metro_priv); - dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n", - __func__, serial->port[i]->number); - } + return 0; } -static int metrousb_startup(struct usb_serial *serial) +static int metrousb_port_remove(struct usb_serial_port *port) { struct metrousb_private *metro_priv; - struct usb_serial_port *port; - int i = 0; - dev_dbg(&serial->dev->dev, "%s\n", __func__); - - /* Loop through the serial ports setting up the private structures. - * Currently we only use one port. */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - - /* Declare memory. */ - metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL); - if (!metro_priv) - return -ENOMEM; - - /* Initialize memory. */ - spin_lock_init(&metro_priv->lock); - usb_set_serial_port_data(port, metro_priv); - - dev_dbg(&serial->dev->dev, "%s - port number=%d\n ", - __func__, port->number); - } + metro_priv = usb_get_serial_port_data(port); + kfree(metro_priv); return 0; } @@ -414,8 +387,8 @@ static struct usb_serial_driver metrousb_device = { .close = metrousb_cleanup, .read_int_callback = metrousb_read_int_callback, .write_int_callback = metrousb_write_int_callback, - .attach = metrousb_startup, - .release = metrousb_shutdown, + .port_probe = metrousb_port_probe, + .port_remove = metrousb_port_remove, .throttle = metrousb_throttle, .unthrottle = metrousb_unthrottle, .tiocmget = metrousb_tiocmget, diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 1bf1ad066666..75267421aad8 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1966,9 +1966,7 @@ static int mos7720_ioctl(struct tty_struct *tty, static int mos7720_startup(struct usb_serial *serial) { - struct moschip_port *mos7720_port; struct usb_device *dev; - int i; char data; u16 product; int ret_val; @@ -1999,29 +1997,6 @@ static int mos7720_startup(struct usb_serial *serial) serial->port[1]->interrupt_in_buffer = NULL; } - - /* set up serial port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7720_port == NULL) { - dev_err(&dev->dev, "%s - Out of memory\n", __func__); - return -ENOMEM; - } - - /* Initialize all port interrupt end point to port 0 int - * endpoint. Our device has only one interrupt endpoint - * common to all ports */ - serial->port[i]->interrupt_in_endpointAddress = - serial->port[0]->interrupt_in_endpointAddress; - - mos7720_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], mos7720_port); - - dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number); - dev_dbg(&dev->dev, "serial number is %d\n", serial->minor); - } - - /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); @@ -2049,8 +2024,6 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { - int i; - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2089,9 +2062,36 @@ static void mos7720_release(struct usb_serial *serial) kref_put(&mos_parport->ref_count, destroy_mos_parport); } #endif - /* free private structure allocated for serial port */ - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); +} + +static int mos7720_port_probe(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); + if (!mos7720_port) + return -ENOMEM; + + /* Initialize all port interrupt end point to port 0 int endpoint. + * Our device has only one interrupt endpoint common to all ports. + */ + port->interrupt_in_endpointAddress = + port->serial->port[0]->interrupt_in_endpointAddress; + mos7720_port->port = port; + + usb_set_serial_port_data(port, mos7720_port); + + return 0; +} + +static int mos7720_port_remove(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + kfree(mos7720_port); + + return 0; } static struct usb_serial_driver moschip7720_2port_driver = { @@ -2109,6 +2109,8 @@ static struct usb_serial_driver moschip7720_2port_driver = { .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, + .port_probe = mos7720_port_probe, + .port_remove = mos7720_port_remove, .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d6d4eeca8c68..1cf3375ec1af 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -218,12 +218,10 @@ struct moschip_port { int port_num; /*Actual port number in the device(1,2,etc) */ struct urb *write_urb; /* write URB for this port */ struct urb *read_urb; /* read URB for this port */ - struct urb *int_urb; __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ char open; char open_ports; - char zombie; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ int delta_msr_cond; @@ -478,7 +476,6 @@ static void mos7840_control_callback(struct urb *urb) struct moschip_port *mos7840_port; struct device *dev = &urb->dev->dev; __u8 regval = 0x0; - int result = 0; int status = urb->status; mos7840_port = urb->context; @@ -495,7 +492,7 @@ static void mos7840_control_callback(struct urb *urb) return; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - goto exit; + return; } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); @@ -508,16 +505,6 @@ static void mos7840_control_callback(struct urb *urb) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) mos7840_handle_new_lsr(mos7840_port, regval); - -exit: - spin_lock(&mos7840_port->pool_lock); - if (!mos7840_port->zombie) - result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); - spin_unlock(&mos7840_port->pool_lock); - if (result) { - dev_err(dev, "%s - Error %d submitting interrupt urb\n", - __func__, result); - } } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, @@ -686,14 +673,7 @@ static void mos7840_interrupt_callback(struct urb *urb) wreg = MODEM_STATUS_REGISTER; break; } - spin_lock(&mos7840_port->pool_lock); - if (!mos7840_port->zombie) { - rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); - } else { - spin_unlock(&mos7840_port->pool_lock); - return; - } - spin_unlock(&mos7840_port->pool_lock); + rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); } } } @@ -2347,309 +2327,249 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } -/**************************************************************************** - * mos7840_startup - ****************************************************************************/ - -static int mos7840_startup(struct usb_serial *serial) +static int mos7840_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct moschip_port *mos7840_port; - struct usb_device *dev; - int i, status; + int status; + int pnum; __u16 Data; - dev = serial->dev; - /* we set up the pointers to the endpoints in the mos7840_open * * function, as the structures aren't created yet. */ - /* set up port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i); - mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7840_port == NULL) { - dev_err(&dev->dev, "%s - Out of memory\n", __func__); - status = -ENOMEM; - i--; /* don't follow NULL pointer cleaning up */ - goto error; - } - - /* Initialize all port interrupt end point to port 0 int - * endpoint. Our device has only one interrupt end point - * common to all port */ - - mos7840_port->port = serial->port[i]; - mos7840_set_port_private(serial->port[i], mos7840_port); - spin_lock_init(&mos7840_port->pool_lock); - - /* minor is not initialised until later by - * usb-serial.c:get_free_serial() and cannot therefore be used - * to index device instances */ - mos7840_port->port_num = i + 1; - dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number); - dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor); - dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); - dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor); - - if (mos7840_port->port_num == 1) { - mos7840_port->SpRegOffset = 0x0; - mos7840_port->ControlRegOffset = 0x1; - mos7840_port->DcrRegOffset = 0x4; - } else if ((mos7840_port->port_num == 2) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0x8; - mos7840_port->ControlRegOffset = 0x9; - mos7840_port->DcrRegOffset = 0x16; - } else if ((mos7840_port->port_num == 2) - && (serial->num_ports == 2)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 3) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 4) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xc; - mos7840_port->ControlRegOffset = 0xd; - mos7840_port->DcrRegOffset = 0x1c; - } - mos7840_dump_serial_port(serial->port[i], mos7840_port); - mos7840_set_port_private(serial->port[i], mos7840_port); + pnum = port->number - serial->minor; - /* enable rx_disable bit in control register */ - status = mos7840_get_reg_sync(serial->port[i], - mos7840_port->ControlRegOffset, &Data); - if (status < 0) { - dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); - Data |= 0x08; /* setting driver done bit */ - Data |= 0x04; /* sp1_bit to have cts change reflect in - modem status reg */ - - /* Data |= 0x20; //rx_disable bit */ - status = mos7840_set_reg_sync(serial->port[i], - mos7840_port->ControlRegOffset, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status); + dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (mos7840_port == NULL) { + dev_err(&port->dev, "%s - Out of memory\n", __func__); + return -ENOMEM; + } - /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 - and 0x24 in DCR3 */ - Data = 0x01; - status = mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + 0), Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status); + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt end point + * common to all port */ + + mos7840_port->port = port; + mos7840_set_port_private(port, mos7840_port); + spin_lock_init(&mos7840_port->pool_lock); + + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = pnum + 1; + dev_dbg(&port->dev, "port->number = %d\n", port->number); + dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); + dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); + + if (mos7840_port->port_num == 1) { + mos7840_port->SpRegOffset = 0x0; + mos7840_port->ControlRegOffset = 0x1; + mos7840_port->DcrRegOffset = 0x4; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0x8; + mos7840_port->ControlRegOffset = 0x9; + mos7840_port->DcrRegOffset = 0x16; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xc; + mos7840_port->ControlRegOffset = 0xd; + mos7840_port->DcrRegOffset = 0x1c; + } + mos7840_dump_serial_port(port, mos7840_port); + mos7840_set_port_private(port, mos7840_port); + + /* enable rx_disable bit in control register */ + status = mos7840_get_reg_sync(port, + mos7840_port->ControlRegOffset, &Data); + if (status < 0) { + dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); + Data |= 0x08; /* setting driver done bit */ + Data |= 0x04; /* sp1_bit to have cts change reflect in + modem status reg */ - Data = 0x05; - status = mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + 1), Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status); + /* Data |= 0x20; //rx_disable bit */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); - Data = 0x24; - status = mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + 2), Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status); + /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 + and 0x24 in DCR3 */ + Data = 0x01; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 0), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); - /* write values in clkstart0x0 and clkmulti 0x20 */ - Data = 0x0; - status = mos7840_set_reg_sync(serial->port[i], - CLK_START_VALUE_REGISTER, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); + Data = 0x05; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 1), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); - Data = 0x20; - status = mos7840_set_reg_sync(serial->port[i], - CLK_MULTI_REGISTER, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); - goto error; - } else - dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); + Data = 0x24; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 2), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); - /* write value 0x0 to scratchpad register */ - Data = 0x00; - status = mos7840_set_uart_reg(serial->port[i], - SCRATCH_PAD_REGISTER, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); - break; - } else - dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + /* write values in clkstart0x0 and clkmulti 0x20 */ + Data = 0x0; + status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); - /* Zero Length flag register */ - if ((mos7840_port->port_num != 1) - && (serial->num_ports == 2)) { + Data = 0x20; + status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); - Data = 0xff; - status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16)mos7840_port->port_num)), Data); - dev_dbg(&dev->dev, "ZLIP offset %x\n", + /* write value 0x0 to scratchpad register */ + Data = 0x00; + status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + + /* Zero Length flag register */ + if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { + Data = 0xff; + status = mos7840_set_reg_sync(port, + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num)), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); - if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); - break; - } else - dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status); - } else { - Data = 0xff; - status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16)mos7840_port->port_num) - 0x1), Data); - dev_dbg(&dev->dev, "ZLIP offset %x\n", + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); + goto out; + } else + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); + } else { + Data = 0xff; + status = mos7840_set_reg_sync(port, + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num) - 0x1), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); - if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status); - break; - } else - dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); + goto out; + } else + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); - } - mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); - mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), - GFP_KERNEL); - if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || - !mos7840_port->dr) { - status = -ENOMEM; - goto error; - } + } + mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || + !mos7840_port->dr) { + status = -ENOMEM; + goto error; + } - mos7840_port->has_led = false; + mos7840_port->has_led = false; - /* Initialize LED timers */ - if (device_type == MOSCHIP_DEVICE_ID_7810) { - mos7840_port->has_led = true; + /* Initialize LED timers */ + if (device_type == MOSCHIP_DEVICE_ID_7810) { + mos7840_port->has_led = true; - init_timer(&mos7840_port->led_timer1); - mos7840_port->led_timer1.function = mos7840_led_off; - mos7840_port->led_timer1.expires = - jiffies + msecs_to_jiffies(LED_ON_MS); - mos7840_port->led_timer1.data = - (unsigned long)mos7840_port; + init_timer(&mos7840_port->led_timer1); + mos7840_port->led_timer1.function = mos7840_led_off; + mos7840_port->led_timer1.expires = + jiffies + msecs_to_jiffies(LED_ON_MS); + mos7840_port->led_timer1.data = (unsigned long)mos7840_port; - init_timer(&mos7840_port->led_timer2); - mos7840_port->led_timer2.function = - mos7840_led_flag_off; - mos7840_port->led_timer2.expires = - jiffies + msecs_to_jiffies(LED_OFF_MS); - mos7840_port->led_timer2.data = - (unsigned long)mos7840_port; + init_timer(&mos7840_port->led_timer2); + mos7840_port->led_timer2.function = mos7840_led_flag_off; + mos7840_port->led_timer2.expires = + jiffies + msecs_to_jiffies(LED_OFF_MS); + mos7840_port->led_timer2.data = (unsigned long)mos7840_port; - mos7840_port->led_flag = false; + mos7840_port->led_flag = false; - /* Turn off LED */ - mos7840_set_led_sync(serial->port[i], - MODEM_CONTROL_REGISTER, 0x0300); - } + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); } +out: + if (pnum == serial->num_ports - 1) { + /* Zero Length flag enable */ + Data = 0x0f; + status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); - /* Zero Length flag enable */ - Data = 0x0f; - status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); - goto error; - } else - dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x03, 0x00, 0x01, 0x00, NULL, 0x00, + MOS_WDR_TIMEOUT); + } return 0; error: - for (/* nothing */; i >= 0; i--) { - mos7840_port = mos7840_get_port_private(serial->port[i]); + kfree(mos7840_port->dr); + kfree(mos7840_port->ctrl_buf); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port); - kfree(mos7840_port->dr); - kfree(mos7840_port->ctrl_buf); - usb_free_urb(mos7840_port->control_urb); - kfree(mos7840_port); - serial->port[i] = NULL; - } return status; } -/**************************************************************************** - * mos7840_disconnect - * This function is called whenever the device is removed from the usb bus. - ****************************************************************************/ - -static void mos7840_disconnect(struct usb_serial *serial) +static int mos7840_port_remove(struct usb_serial_port *port) { - int i; - unsigned long flags; struct moschip_port *mos7840_port; - /* check for the ports to be closed,close the ports and disconnect */ + mos7840_port = mos7840_get_port_private(port); - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ + if (mos7840_port->has_led) { + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); - for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = mos7840_get_port_private(serial->port[i]); - if (mos7840_port) { - spin_lock_irqsave(&mos7840_port->pool_lock, flags); - mos7840_port->zombie = 1; - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - usb_kill_urb(mos7840_port->control_urb); - } + del_timer_sync(&mos7840_port->led_timer1); + del_timer_sync(&mos7840_port->led_timer2); } -} - -/**************************************************************************** - * mos7840_release - * This function is called when the usb_serial structure is freed. - ****************************************************************************/ - -static void mos7840_release(struct usb_serial *serial) -{ - int i; - struct moschip_port *mos7840_port; - - /* check for the ports to be closed,close the ports and disconnect */ + usb_kill_urb(mos7840_port->control_urb); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ - - for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = mos7840_get_port_private(serial->port[i]); - if (mos7840_port) { - if (mos7840_port->has_led) { - /* Turn off LED */ - mos7840_set_led_sync(mos7840_port->port, - MODEM_CONTROL_REGISTER, 0x0300); - - del_timer_sync(&mos7840_port->led_timer1); - del_timer_sync(&mos7840_port->led_timer2); - } - kfree(mos7840_port->ctrl_buf); - kfree(mos7840_port->dr); - kfree(mos7840_port); - } - } + return 0; } static struct usb_serial_driver moschip7840_4port_device = { @@ -2677,9 +2597,8 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmget = mos7840_tiocmget, .tiocmset = mos7840_tiocmset, .get_icount = mos7840_get_icount, - .attach = mos7840_startup, - .disconnect = mos7840_disconnect, - .release = mos7840_release, + .port_probe = mos7840_port_probe, + .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, .read_int_callback = mos7840_interrupt_callback, }; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6def58b79382..9ab73d295774 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -44,8 +44,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); -static void omninet_release(struct usb_serial *serial); -static int omninet_attach(struct usb_serial *serial); +static int omninet_port_probe(struct usb_serial_port *port); +static int omninet_port_remove(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, @@ -62,7 +62,8 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, - .attach = omninet_attach, + .port_probe = omninet_port_probe, + .port_remove = omninet_port_remove, .open = omninet_open, .close = omninet_close, .write = omninet_write, @@ -70,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = { .read_bulk_callback = omninet_read_bulk_callback, .write_bulk_callback = omninet_write_bulk_callback, .disconnect = omninet_disconnect, - .release = omninet_release, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -112,18 +112,26 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; -static int omninet_attach(struct usb_serial *serial) +static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; - struct usb_serial_port *port = serial->port[0]; od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); - if (!od) { - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", - __func__, sizeof(struct omninet_data)); + if (!od) return -ENOMEM; - } + usb_set_serial_port_data(port, od); + + return 0; +} + +static int omninet_port_remove(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = usb_get_serial_port_data(port); + kfree(od); + return 0; } @@ -279,14 +287,6 @@ static void omninet_disconnect(struct usb_serial *serial) usb_kill_urb(wport->write_urb); } - -static void omninet_release(struct usb_serial *serial) -{ - struct usb_serial_port *port = serial->port[0]; - - kfree(usb_get_serial_port_data(port)); -} - module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 41b1647306eb..6aba731d4864 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -155,7 +155,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, { struct usb_serial *serial = port->serial; int retval; - u8 buffer[2]; + u8 *buffer; + + buffer = kzalloc(1, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = val; /* Send the message to the vendor control endpoint @@ -164,6 +168,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, requesttype, USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 0, 0, buffer, 1, 0); + kfree(buffer); return retval; } @@ -281,7 +286,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, if (!dr) { dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; - goto error; + goto error_no_dr; } dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; @@ -311,6 +316,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, return count; error: + kfree(dr); +error_no_dr: usb_free_urb(urb); error_no_urb: kfree(buffer); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 54d4148d01d1..5dee7d61241e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -47,6 +47,7 @@ /* Function prototypes */ static int option_probe(struct usb_serial *serial, const struct usb_device_id *id); +static int option_attach(struct usb_serial *serial); static void option_release(struct usb_serial *serial); static int option_send_setup(struct usb_serial_port *port); static void option_instat_callback(struct urb *urb); @@ -1288,8 +1289,9 @@ static struct usb_serial_driver option_1port_device = { .tiocmget = usb_wwan_tiocmget, .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, - .attach = usb_wwan_startup, + .attach = option_attach, .release = option_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM @@ -1335,8 +1337,6 @@ static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, static int option_probe(struct usb_serial *serial, const struct usb_device_id *id) { - struct usb_wwan_intf_private *data; - struct option_private *priv; struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; @@ -1374,6 +1374,19 @@ static int option_probe(struct usb_serial *serial, iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) return -ENODEV; + /* Store device id so we can use it during attach. */ + usb_set_serial_data(serial, (void *)id); + + return 0; +} + +static int option_attach(struct usb_serial *serial) +{ + struct usb_interface_descriptor *iface_desc; + const struct usb_device_id *id; + struct usb_wwan_intf_private *data; + struct option_private *priv; + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) return -ENOMEM; @@ -1384,6 +1397,10 @@ static int option_probe(struct usb_serial *serial, return -ENOMEM; } + /* Retrieve device id stored at probe. */ + id = usb_get_serial_data(serial); + iface_desc = &serial->interface->cur_altsetting->desc; + priv->bInterfaceNumber = iface_desc->bInterfaceNumber; data->private = priv; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index c3ddb65c05f2..aa148c21ea40 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -138,7 +138,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { - struct usb_wwan_intf_private *data; struct usb_host_interface *intf = serial->interface->cur_altsetting; struct device *dev = &serial->dev->dev; int retval = -ENODEV; @@ -154,13 +153,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) ifnum = intf->desc.bInterfaceNumber; dev_dbg(dev, "This Interface = %d\n", ifnum); - data = kzalloc(sizeof(struct usb_wwan_intf_private), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - spin_lock_init(&data->susp_lock); - if (nintf == 1) { /* QDL mode */ /* Gobi 2000 has a single altsetting, older ones have two */ @@ -253,20 +245,28 @@ done: } } - /* Set serial->private if not returning error */ - if (retval == 0) - usb_set_serial_data(serial, data); - else - kfree(data); - return retval; } +static int qc_attach(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + + usb_set_serial_data(serial, data); + + return 0; +} + static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -285,8 +285,9 @@ static struct usb_serial_driver qcdevice = { .write = usb_wwan_write, .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, - .attach = usb_wwan_startup, + .attach = qc_attach, .release = qc_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 2cdfdcc90b37..ffcfc962ab10 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -143,12 +143,12 @@ static void qt2_read_bulk_callback(struct urb *urb); static void qt2_release(struct usb_serial *serial) { - int i; + struct qt2_serial_private *serial_priv; - kfree(usb_get_serial_data(serial)); + serial_priv = usb_get_serial_data(serial); - for (i = 0; i < serial->num_ports; i++) - kfree(usb_get_serial_port_data(serial->port[i])); + usb_free_urb(serial_priv->read_urb); + kfree(serial_priv); } static inline int calc_baud_divisor(int baudrate) @@ -423,11 +423,16 @@ static void qt2_close(struct usb_serial_port *port) port_priv->is_open = false; spin_lock_irqsave(&port_priv->urb_lock, flags); - if (port_priv->write_urb->status == -EINPROGRESS) - usb_kill_urb(port_priv->write_urb); + usb_kill_urb(port_priv->write_urb); port_priv->urb_in_use = false; spin_unlock_irqrestore(&port_priv->urb_lock, flags); + mutex_lock(&port->serial->disc_mutex); + if (port->serial->disconnected) { + mutex_unlock(&port->serial->disc_mutex); + return; + } + /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -459,26 +464,14 @@ static void qt2_close(struct usb_serial_port *port) dev_err(&port->dev, "%s - close port failed %i\n", __func__, i); + mutex_unlock(&port->serial->disc_mutex); } static void qt2_disconnect(struct usb_serial *serial) { struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); - struct qt2_port_private *port_priv; - int i; - - if (serial_priv->read_urb->status == -EINPROGRESS) - usb_kill_urb(serial_priv->read_urb); - - usb_free_urb(serial_priv->read_urb); - for (i = 0; i < serial->num_ports; i++) { - port_priv = usb_get_serial_port_data(serial->port[i]); - - if (port_priv->write_urb->status == -EINPROGRESS) - usb_kill_urb(port_priv->write_urb); - usb_free_urb(port_priv->write_urb); - } + usb_kill_urb(serial_priv->read_urb); } static int get_serial_info(struct usb_serial_port *port, @@ -773,11 +766,9 @@ static void qt2_read_bulk_callback(struct urb *urb) static int qt2_setup_urbs(struct usb_serial *serial) { - struct usb_serial_port *port; struct usb_serial_port *port0; struct qt2_serial_private *serial_priv; - struct qt2_port_private *port_priv; - int pcount, status; + int status; port0 = serial->port[0]; @@ -795,46 +786,21 @@ static int qt2_setup_urbs(struct usb_serial *serial) sizeof(serial_priv->read_buffer), qt2_read_bulk_callback, serial); - /* setup write_urb for each port */ - for (pcount = 0; pcount < serial->num_ports; pcount++) { - - port = serial->port[pcount]; - port_priv = usb_get_serial_port_data(port); - - port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port_priv->write_urb) { - dev_err(&serial->dev->dev, - "failed to alloc write_urb for port %i\n", - pcount); - return -ENOMEM; - } - - usb_fill_bulk_urb(port_priv->write_urb, - serial->dev, - usb_sndbulkpipe(serial->dev, - port0-> - bulk_out_endpointAddress), - port_priv->write_buffer, - sizeof(port_priv->write_buffer), - qt2_write_bulk_callback, port); - } - status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL); if (status != 0) { dev_err(&serial->dev->dev, "%s - submit read urb failed %i\n", __func__, status); + usb_free_urb(serial_priv->read_urb); return status; } return 0; - } static int qt2_attach(struct usb_serial *serial) { struct qt2_serial_private *serial_priv; - struct qt2_port_private *port_priv; - int status, pcount; + int status; /* power on unit */ status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -854,26 +820,6 @@ static int qt2_attach(struct usb_serial *serial) usb_set_serial_data(serial, serial_priv); - for (pcount = 0; pcount < serial->num_ports; pcount++) { - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); - if (!port_priv) { - dev_err(&serial->dev->dev, - "%s- kmalloc(%Zd) failed.\n", __func__, - sizeof(*port_priv)); - pcount--; - status = -ENOMEM; - goto attach_failed; - } - - spin_lock_init(&port_priv->lock); - spin_lock_init(&port_priv->urb_lock); - init_waitqueue_head(&port_priv->delta_msr_wait); - - port_priv->port = serial->port[pcount]; - - usb_set_serial_port_data(serial->port[pcount], port_priv); - } - status = qt2_setup_urbs(serial); if (status != 0) goto attach_failed; @@ -881,14 +827,53 @@ static int qt2_attach(struct usb_serial *serial) return 0; attach_failed: - for (/* empty */; pcount >= 0; pcount--) { - port_priv = usb_get_serial_port_data(serial->port[pcount]); - kfree(port_priv); - } kfree(serial_priv); return status; } +static int qt2_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct qt2_port_private *port_priv; + u8 bEndpointAddress; + + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); + if (!port_priv) + return -ENOMEM; + + spin_lock_init(&port_priv->lock); + spin_lock_init(&port_priv->urb_lock); + init_waitqueue_head(&port_priv->delta_msr_wait); + port_priv->port = port; + + port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port_priv->write_urb) { + kfree(port_priv); + return -ENOMEM; + } + bEndpointAddress = serial->port[0]->bulk_out_endpointAddress; + usb_fill_bulk_urb(port_priv->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, bEndpointAddress), + port_priv->write_buffer, + sizeof(port_priv->write_buffer), + qt2_write_bulk_callback, port); + + usb_set_serial_port_data(port, port_priv); + + return 0; +} + +static int qt2_port_remove(struct usb_serial_port *port) +{ + struct qt2_port_private *port_priv; + + port_priv = usb_get_serial_port_data(port); + usb_free_urb(port_priv->write_urb); + kfree(port_priv); + + return 0; +} + static int qt2_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1127,6 +1112,8 @@ static struct usb_serial_driver qt2_device = { .attach = qt2_attach, .release = qt2_release, .disconnect = qt2_disconnect, + .port_probe = qt2_port_probe, + .port_remove = qt2_port_remove, .dtr_rts = qt2_dtr_rts, .break_ctl = qt2_break_ctl, .tiocmget = qt2_tiocmget, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 01d882cf3775..270860f6bb2a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -161,7 +161,6 @@ static int sierra_probe(struct usb_serial *serial, { int result = 0; struct usb_device *udev; - struct sierra_intf_private *data; u8 ifnum; udev = serial->dev; @@ -188,11 +187,6 @@ static int sierra_probe(struct usb_serial *serial, return -ENODEV; } - data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); - if (!data) - return -ENOMEM; - spin_lock_init(&data->susp_lock); - return result; } @@ -884,11 +878,15 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on) static int sierra_startup(struct usb_serial *serial) { - struct usb_serial_port *port; - struct sierra_port_private *portdata; - struct sierra_iface_info *himemoryp = NULL; - int i; - u8 ifnum; + struct sierra_intf_private *intfdata; + + intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL); + if (!intfdata) + return -ENOMEM; + + spin_lock_init(&intfdata->susp_lock); + + usb_set_serial_data(serial, intfdata); /* Set Device mode to D0 */ sierra_set_power_state(serial->dev, 0x0000); @@ -897,68 +895,71 @@ static int sierra_startup(struct usb_serial *serial) if (nmea) sierra_vsc_set_nmea(serial->dev, 1); - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); - if (!portdata) { - dev_dbg(&port->dev, "%s: kmalloc for " - "sierra_port_private (%d) failed!\n", - __func__, i); - return -ENOMEM; - } - spin_lock_init(&portdata->lock); - init_usb_anchor(&portdata->active); - init_usb_anchor(&portdata->delayed); - ifnum = i; - /* Assume low memory requirements */ - portdata->num_out_urbs = N_OUT_URB; - portdata->num_in_urbs = N_IN_URB; - - /* Determine actual memory requirements */ - if (serial->num_ports == 1) { - /* Get interface number for composite device */ - ifnum = sierra_calc_interface(serial); - himemoryp = - (struct sierra_iface_info *)&typeB_interface_list; - if (is_himemory(ifnum, himemoryp)) { - portdata->num_out_urbs = N_OUT_URB_HM; - portdata->num_in_urbs = N_IN_URB_HM; - } - } - else { - himemoryp = - (struct sierra_iface_info *)&typeA_interface_list; - if (is_himemory(i, himemoryp)) { - portdata->num_out_urbs = N_OUT_URB_HM; - portdata->num_in_urbs = N_IN_URB_HM; - } - } - dev_dbg(&serial->dev->dev, - "Memory usage (urbs) interface #%d, in=%d, out=%d\n", - ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); - /* Set the port private data pointer */ - usb_set_serial_port_data(port, portdata); - } - return 0; } static void sierra_release(struct usb_serial *serial) { - int i; - struct usb_serial_port *port; + struct sierra_intf_private *intfdata; + + intfdata = usb_get_serial_data(serial); + kfree(intfdata); +} + +static int sierra_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; + const struct sierra_iface_info *himemoryp; + u8 ifnum; - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - if (!port) - continue; - portdata = usb_get_serial_port_data(port); - if (!portdata) - continue; - kfree(portdata); + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; + + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); + + /* Assume low memory requirements */ + portdata->num_out_urbs = N_OUT_URB; + portdata->num_in_urbs = N_IN_URB; + + /* Determine actual memory requirements */ + if (serial->num_ports == 1) { + /* Get interface number for composite device */ + ifnum = sierra_calc_interface(serial); + himemoryp = &typeB_interface_list; + } else { + /* This is really the usb-serial port number of the interface + * rather than the interface number. + */ + ifnum = port->number - serial->minor; + himemoryp = &typeA_interface_list; } + + if (is_himemory(ifnum, himemoryp)) { + portdata->num_out_urbs = N_OUT_URB_HM; + portdata->num_in_urbs = N_IN_URB_HM; + } + + dev_dbg(&port->dev, + "Memory usage (urbs) interface #%d, in=%d, out=%d\n", + ifnum, portdata->num_in_urbs, portdata->num_out_urbs); + + usb_set_serial_port_data(port, portdata); + + return 0; +} + +static int sierra_port_remove(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + kfree(portdata); + + return 0; } #ifdef CONFIG_PM @@ -1062,6 +1063,8 @@ static struct usb_serial_driver sierra_device = { .tiocmset = sierra_tiocmset, .attach = sierra_startup, .release = sierra_release, + .port_probe = sierra_port_probe, + .port_remove = sierra_port_remove, .suspend = sierra_suspend, .resume = sierra_resume, .read_int_callback = sierra_instat_callback, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 1f034d2397c6..684739b8efd0 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -8,7 +8,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); -extern int usb_wwan_startup(struct usb_serial *serial); +extern int usb_wwan_port_probe(struct usb_serial_port *port); extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index e42aa398ed37..61a73ad1a187 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -447,10 +447,12 @@ void usb_wwan_close(struct usb_serial_port *port) EXPORT_SYMBOL(usb_wwan_close); /* Helper functions used by usb_wwan_setup_urbs */ -static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, +static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, + int endpoint, int dir, void *ctx, char *buf, int len, void (*callback) (struct urb *)) { + struct usb_serial *serial = port->serial; struct urb *urb; if (endpoint == -1) @@ -472,101 +474,75 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, return urb; } -/* Setup urbs */ -static void usb_wwan_setup_urbs(struct usb_serial *serial) +int usb_wwan_port_probe(struct usb_serial_port *port) { - int i, j; - struct usb_serial_port *port; struct usb_wwan_port_private *portdata; + struct urb *urb; + u8 *buffer; + int err; + int i; - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; - /* Do indat endpoints first */ - for (j = 0; j < N_IN_URB; ++j) { - portdata->in_urbs[j] = usb_wwan_setup_urb(serial, - port-> - bulk_in_endpointAddress, - USB_DIR_IN, - port, - portdata-> - in_buffer[j], - IN_BUFLEN, - usb_wwan_indat_callback); - } + init_usb_anchor(&portdata->delayed); - /* outdat endpoints */ - for (j = 0; j < N_OUT_URB; ++j) { - portdata->out_urbs[j] = usb_wwan_setup_urb(serial, - port-> - bulk_out_endpointAddress, - USB_DIR_OUT, - port, - portdata-> - out_buffer - [j], - OUT_BUFLEN, - usb_wwan_outdat_callback); - } + for (i = 0; i < N_IN_URB; i++) { + buffer = (u8 *)__get_free_page(GFP_KERNEL); + if (!buffer) + goto bail_out_error; + portdata->in_buffer[i] = buffer; + + urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, + USB_DIR_IN, port, + buffer, IN_BUFLEN, + usb_wwan_indat_callback); + portdata->in_urbs[i] = urb; } -} - -int usb_wwan_startup(struct usb_serial *serial) -{ - int i, j, err; - struct usb_serial_port *port; - struct usb_wwan_port_private *portdata; - u8 *buffer; - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); - if (!portdata) { - dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n", - __func__, i); - return 1; - } - init_usb_anchor(&portdata->delayed); + for (i = 0; i < N_OUT_URB; i++) { + if (port->bulk_out_endpointAddress == -1) + continue; - for (j = 0; j < N_IN_URB; j++) { - buffer = (u8 *) __get_free_page(GFP_KERNEL); - if (!buffer) - goto bail_out_error; - portdata->in_buffer[j] = buffer; - } + buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); + if (!buffer) + goto bail_out_error2; + portdata->out_buffer[i] = buffer; - for (j = 0; j < N_OUT_URB; j++) { - buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); - if (!buffer) - goto bail_out_error2; - portdata->out_buffer[j] = buffer; - } + urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, + USB_DIR_OUT, port, + buffer, OUT_BUFLEN, + usb_wwan_outdat_callback); + portdata->out_urbs[i] = urb; + } - usb_set_serial_port_data(port, portdata); + usb_set_serial_port_data(port, portdata); - if (!port->interrupt_in_urb) - continue; + if (port->interrupt_in_urb) { err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", __func__, err); } - usb_wwan_setup_urbs(serial); + return 0; bail_out_error2: - for (j = 0; j < N_OUT_URB; j++) - kfree(portdata->out_buffer[j]); + for (i = 0; i < N_OUT_URB; i++) { + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); + } bail_out_error: - for (j = 0; j < N_IN_URB; j++) - if (portdata->in_buffer[j]) - free_page((unsigned long)portdata->in_buffer[j]); + for (i = 0; i < N_IN_URB; i++) { + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } kfree(portdata); - return 1; + + return -ENOMEM; } -EXPORT_SYMBOL(usb_wwan_startup); +EXPORT_SYMBOL_GPL(usb_wwan_port_probe); int usb_wwan_port_remove(struct usb_serial_port *port) { diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 346c7efc20b0..b9fca3586d74 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -83,6 +83,8 @@ static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static int whiteheat_port_remove(struct usb_serial_port *port); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); @@ -117,6 +119,8 @@ static struct usb_serial_driver whiteheat_device = { .num_ports = 4, .attach = whiteheat_attach, .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, .open = whiteheat_open, .close = whiteheat_close, .ioctl = whiteheat_ioctl, @@ -218,15 +222,12 @@ static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - struct usb_serial_port *port; - struct whiteheat_private *info; struct whiteheat_hw_info *hw_info; int pipe; int ret; int alen; __u8 *command; __u8 *result; - int i; command_port = serial->port[COMMAND_PORT]; @@ -285,22 +286,6 @@ static int whiteheat_attach(struct usb_serial *serial) serial->type->description, hw_info->sw_major_rev, hw_info->sw_minor_rev); - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - - info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); - if (info == NULL) { - dev_err(&port->dev, - "%s: Out of memory for port structures\n", - serial->type->description); - goto no_private; - } - - info->mcr = 0; - - usb_set_serial_port_data(port, info); - } - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { @@ -333,16 +318,10 @@ no_firmware: "%s: please contact support@connecttech.com\n", serial->type->description); kfree(result); + kfree(command); return -ENODEV; no_command_private: - for (i = serial->num_ports - 1; i >= 0; i--) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - kfree(info); -no_private: - ; - } kfree(result); no_result_buffer: kfree(command); @@ -350,21 +329,36 @@ no_command_buffer: return -ENOMEM; } - static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; - struct whiteheat_private *info; - int i; /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; kfree(usb_get_serial_port_data(command_port)); +} - for (i = 0; i < serial->num_ports; i++) { - info = usb_get_serial_port_data(serial->port[i]); - kfree(info); - } +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); + + return 0; +} + +static int whiteheat_port_remove(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = usb_get_serial_port_data(port); + kfree(info); + + return 0; } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 779cd954abcb..d305a5aa3a5d 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1004,6 +1004,12 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, USB_SC_8070, USB_PR_CB, NULL, US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), +/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */ +UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100, + "Casio", + "EX-N1 DigitalCamera", + USB_SC_8070, USB_PR_DEVICE, NULL, 0), + /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, "Samsung", |