diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 194 insertions, 155 deletions
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 785f0ed037f7..ee34e9046f7e 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -3,6 +3,7 @@ config USB_CHIPIDEA depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA select EXTCON select RESET_CONTROLLER + select USB_ULPI_BUS help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: @@ -38,12 +39,4 @@ config USB_CHIPIDEA_HOST help Say Y here to enable host controller functionality of the ChipIdea driver. - -config USB_CHIPIDEA_ULPI - bool "ChipIdea ULPI PHY support" - depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_CHIPIDEA - help - Say Y here if you have a ULPI PHY attached to your ChipIdea - controller. - endif diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index e3d5e728fa53..12df94f78f72 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -1,11 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o -ci_hdrc-y := core.o otg.o debug.o +ci_hdrc-y := core.o otg.o debug.o ulpi.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o -ci_hdrc-$(CONFIG_USB_CHIPIDEA_ULPI) += ulpi.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 0bf244d50544..6a2cc5cd0281 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -240,10 +240,8 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; -#ifdef CONFIG_USB_CHIPIDEA_ULPI struct ulpi *ulpi; struct ulpi_ops ulpi_ops; -#endif struct phy *phy; /* old usb_phy interface */ struct usb_phy *usb_phy; @@ -426,15 +424,9 @@ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) #endif } -#if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI) int ci_ulpi_init(struct ci_hdrc *ci); void ci_ulpi_exit(struct ci_hdrc *ci); int ci_ulpi_resume(struct ci_hdrc *ci); -#else -static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; } -static inline void ci_ulpi_exit(struct ci_hdrc *ci) { } -static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; } -#endif u32 hw_read_intr_enable(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c index 6da42dcd2888..dfec07e8ae1d 100644 --- a/drivers/usb/chipidea/ulpi.c +++ b/drivers/usb/chipidea/ulpi.c @@ -95,6 +95,9 @@ int ci_ulpi_resume(struct ci_hdrc *ci) { int cnt = 100000; + if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) + return 0; + while (cnt-- > 0) { if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) return 0; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 998b32d0167e..75c4623ad779 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1831,6 +1831,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index fcae521df29b..1fb266809966 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1142,10 +1142,14 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (!udev || udev->state == USB_STATE_NOTATTACHED) { /* Tell hub_wq to disconnect the device or - * check for a new connection + * check for a new connection or over current condition. + * Based on USB2.0 Spec Section 11.12.5, + * C_PORT_OVER_CURRENT could be set while + * PORT_OVER_CURRENT is not. So check for any of them. */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || - (portstatus & USB_PORT_STAT_OVERCURRENT)) + (portstatus & USB_PORT_STAT_OVERCURRENT) || + (portchange & USB_PORT_STAT_C_OVERCURRENT)) set_bit(port1, hub->change_bits); } else if (portstatus & USB_PORT_STAT_ENABLE) { diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index c55def2f1320..097057d2eacf 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -378,6 +378,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair Strafe */ + { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index a0f82cca2d9a..cefc99ae69b2 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3430,7 +3430,7 @@ static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg) for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_in[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DIEPCTL(idx)); @@ -3476,7 +3476,7 @@ static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg) for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx)); @@ -3650,7 +3650,7 @@ irq_retry: for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx)); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index b1104be3429c..6e2cdd7b93d4 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2665,34 +2665,35 @@ static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, #define DWC2_USB_DMA_ALIGN 4 -struct dma_aligned_buffer { - void *kmalloc_ptr; - void *old_xfer_buffer; - u8 data[0]; -}; - static void dwc2_free_dma_aligned_buffer(struct urb *urb) { - struct dma_aligned_buffer *temp; + void *stored_xfer_buffer; + size_t length; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; - temp = container_of(urb->transfer_buffer, - struct dma_aligned_buffer, data); + /* Restore urb->transfer_buffer from the end of the allocated area */ + memcpy(&stored_xfer_buffer, urb->transfer_buffer + + urb->transfer_buffer_length, sizeof(urb->transfer_buffer)); - if (usb_urb_dir_in(urb)) - memcpy(temp->old_xfer_buffer, temp->data, - urb->transfer_buffer_length); - urb->transfer_buffer = temp->old_xfer_buffer; - kfree(temp->kmalloc_ptr); + if (usb_urb_dir_in(urb)) { + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(stored_xfer_buffer, urb->transfer_buffer, length); + } + kfree(urb->transfer_buffer); + urb->transfer_buffer = stored_xfer_buffer; urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; } static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) { - struct dma_aligned_buffer *temp, *kmalloc_ptr; + void *kmalloc_ptr; size_t kmalloc_size; if (urb->num_sgs || urb->sg || @@ -2700,22 +2701,29 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) return 0; - /* Allocate a buffer with enough padding for alignment */ + /* + * Allocate a buffer with enough padding for original transfer_buffer + * pointer. This allocation is guaranteed to be aligned properly for + * DMA + */ kmalloc_size = urb->transfer_buffer_length + - sizeof(struct dma_aligned_buffer) + DWC2_USB_DMA_ALIGN - 1; + sizeof(urb->transfer_buffer); kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); if (!kmalloc_ptr) return -ENOMEM; - /* Position our struct dma_aligned_buffer such that data is aligned */ - temp = PTR_ALIGN(kmalloc_ptr + 1, DWC2_USB_DMA_ALIGN) - 1; - temp->kmalloc_ptr = kmalloc_ptr; - temp->old_xfer_buffer = urb->transfer_buffer; + /* + * Position value of original urb->transfer_buffer pointer to the end + * of allocation for later referencing + */ + memcpy(kmalloc_ptr + urb->transfer_buffer_length, + &urb->transfer_buffer, sizeof(urb->transfer_buffer)); + if (usb_urb_dir_out(urb)) - memcpy(temp->data, urb->transfer_buffer, + memcpy(kmalloc_ptr, urb->transfer_buffer, urb->transfer_buffer_length); - urb->transfer_buffer = temp->data; + urb->transfer_buffer = kmalloc_ptr; urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index ed7f05cf4906..8ce10caf3e19 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -1231,7 +1231,10 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, * avoid interrupt storms we'll wait before retrying if we've got * several NAKs. If we didn't do this we'd retry directly from the * interrupt handler and could end up quickly getting another - * interrupt (another NAK), which we'd retry. + * interrupt (another NAK), which we'd retry. Note that we do not + * delay retries for IN parts of control requests, as those are expected + * to complete fairly quickly, and if we delay them we risk confusing + * the device and cause it issue STALL. * * Note that in DMA mode software only gets involved to re-send NAKed * transfers for split transactions, so we only need to apply this @@ -1244,7 +1247,9 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, qtd->error_count = 0; qtd->complete_split = 0; qtd->num_naks++; - qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY; + qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY && + !(chan->ep_type == USB_ENDPOINT_XFER_CONTROL && + chan->ep_is_in); dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); goto handle_nak_done; } diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index c77ff50a88a2..8efde178eef4 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -973,15 +973,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = dwc3_ep0_start_trans(dep); } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && req->request.length && req->request.zero) { - u32 maxpacket; ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->number); if (ret) return; - maxpacket = dep->endpoint.maxpacket; - /* prepare normal TRB */ dwc3_ep0_prepare_one_trb(dep, req->request.dma, req->request.length, diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d2fa071c21b1..b8a15840b4ff 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1819,7 +1819,6 @@ unknown: if (cdev->use_os_string && cdev->os_desc_config && (ctrl->bRequestType & USB_TYPE_VENDOR) && ctrl->bRequest == cdev->b_vendor_code) { - struct usb_request *req; struct usb_configuration *os_desc_cfg; u8 *buf; int interface; diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 33e2030503fa..3ada83d81bda 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3263,7 +3263,7 @@ static int ffs_func_setup(struct usb_function *f, __ffs_event_add(ffs, FUNCTIONFS_SETUP); spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); - return USB_GADGET_DELAYED_STATUS; + return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0; } static bool ffs_func_req_match(struct usb_function *f, diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d2dc1f00180b..d582921f7257 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -438,14 +438,14 @@ static struct usb_descriptor_header *hs_audio_desc[] = { }; struct cntrl_cur_lay3 { - __u32 dCUR; + __le32 dCUR; }; struct cntrl_range_lay3 { - __u16 wNumSubRanges; - __u32 dMIN; - __u32 dMAX; - __u32 dRES; + __le16 wNumSubRanges; + __le32 dMIN; + __le32 dMAX; + __le32 dRES; } __packed; static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, @@ -559,13 +559,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); if (!agdev->out_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - return ret; + return -ENODEV; } agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc); if (!agdev->in_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - return ret; + return -ENODEV; } agdev->in_ep_maxpsize = max_t(u16, @@ -703,9 +703,9 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) - c.dCUR = p_srate; + c.dCUR = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - c.dCUR = c_srate; + c.dCUR = cpu_to_le32(c_srate); value = min_t(unsigned, w_length, sizeof c); memcpy(req->buf, &c, value); @@ -742,15 +742,15 @@ in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { if (entity_id == USB_IN_CLK_ID) - r.dMIN = p_srate; + r.dMIN = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - r.dMIN = c_srate; + r.dMIN = cpu_to_le32(c_srate); else return -EOPNOTSUPP; r.dMAX = r.dMIN; r.dRES = 0; - r.wNumSubRanges = 1; + r.wNumSubRanges = cpu_to_le16(1); value = min_t(unsigned, w_length, sizeof r); memcpy(req->buf, &r, value); diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index a72295c953bb..fb5ed97572e5 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -32,9 +32,6 @@ struct uac_req { struct uac_rtd_params { struct snd_uac_chip *uac; /* parent chip */ bool ep_enabled; /* if the ep is enabled */ - /* Size of the ring buffer */ - size_t dma_bytes; - unsigned char *dma_area; struct snd_pcm_substream *ss; @@ -43,8 +40,6 @@ struct uac_rtd_params { void *rbuf; - size_t period_size; - unsigned max_psize; /* MaxPacketSize of endpoint */ struct uac_req *ureq; @@ -84,12 +79,12 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) { unsigned pending; - unsigned long flags; + unsigned long flags, flags2; unsigned int hw_ptr; - bool update_alsa = false; int status = req->status; struct uac_req *ur = req->context; struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; struct uac_rtd_params *prm = ur->pp; struct snd_uac_chip *uac = prm->uac; @@ -111,6 +106,14 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) if (!substream) goto exit; + snd_pcm_stream_lock_irqsave(substream, flags2); + + runtime = substream->runtime; + if (!runtime || !snd_pcm_running(substream)) { + snd_pcm_stream_unlock_irqrestore(substream, flags2); + goto exit; + } + spin_lock_irqsave(&prm->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { @@ -137,43 +140,46 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) req->actual = req->length; } - pending = prm->hw_ptr % prm->period_size; - pending += req->actual; - if (pending >= prm->period_size) - update_alsa = true; - hw_ptr = prm->hw_ptr; - prm->hw_ptr = (prm->hw_ptr + req->actual) % prm->dma_bytes; spin_unlock_irqrestore(&prm->lock, flags); /* Pack USB load in ALSA ring buffer */ - pending = prm->dma_bytes - hw_ptr; + pending = runtime->dma_bytes - hw_ptr; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { if (unlikely(pending < req->actual)) { - memcpy(req->buf, prm->dma_area + hw_ptr, pending); - memcpy(req->buf + pending, prm->dma_area, + memcpy(req->buf, runtime->dma_area + hw_ptr, pending); + memcpy(req->buf + pending, runtime->dma_area, req->actual - pending); } else { - memcpy(req->buf, prm->dma_area + hw_ptr, req->actual); + memcpy(req->buf, runtime->dma_area + hw_ptr, + req->actual); } } else { if (unlikely(pending < req->actual)) { - memcpy(prm->dma_area + hw_ptr, req->buf, pending); - memcpy(prm->dma_area, req->buf + pending, + memcpy(runtime->dma_area + hw_ptr, req->buf, pending); + memcpy(runtime->dma_area, req->buf + pending, req->actual - pending); } else { - memcpy(prm->dma_area + hw_ptr, req->buf, req->actual); + memcpy(runtime->dma_area + hw_ptr, req->buf, + req->actual); } } + spin_lock_irqsave(&prm->lock, flags); + /* update hw_ptr after data is copied to memory */ + prm->hw_ptr = (hw_ptr + req->actual) % runtime->dma_bytes; + hw_ptr = prm->hw_ptr; + spin_unlock_irqrestore(&prm->lock, flags); + snd_pcm_stream_unlock_irqrestore(substream, flags2); + + if ((hw_ptr % snd_pcm_lib_period_bytes(substream)) < req->actual) + snd_pcm_period_elapsed(substream); + exit: if (usb_ep_queue(ep, req, GFP_ATOMIC)) dev_err(uac->card->dev, "%d Error!\n", __LINE__); - - if (update_alsa) - snd_pcm_period_elapsed(substream); } static int uac_pcm_trigger(struct snd_pcm_substream *substream, int cmd) @@ -236,40 +242,12 @@ static snd_pcm_uframes_t uac_pcm_pointer(struct snd_pcm_substream *substream) static int uac_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { - struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); - struct uac_rtd_params *prm; - int err; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - prm = &uac->p_prm; - else - prm = &uac->c_prm; - - err = snd_pcm_lib_malloc_pages(substream, + return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); - if (err >= 0) { - prm->dma_bytes = substream->runtime->dma_bytes; - prm->dma_area = substream->runtime->dma_area; - prm->period_size = params_period_bytes(hw_params); - } - - return err; } static int uac_pcm_hw_free(struct snd_pcm_substream *substream) { - struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); - struct uac_rtd_params *prm; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - prm = &uac->p_prm; - else - prm = &uac->c_prm; - - prm->dma_area = NULL; - prm->dma_bytes = 0; - prm->period_size = 0; - return snd_pcm_lib_free_pages(substream); } @@ -595,15 +573,15 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name, if (err < 0) goto snd_fail; - strcpy(pcm->name, pcm_name); + strlcpy(pcm->name, pcm_name, sizeof(pcm->name)); pcm->private_data = uac; uac->pcm = pcm; snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &uac_pcm_ops); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &uac_pcm_ops); - strcpy(card->driver, card_name); - strcpy(card->shortname, card_name); + strlcpy(card->driver, card_name, sizeof(card->driver)); + strlcpy(card->shortname, card_name, sizeof(card->shortname)); sprintf(card->longname, "%s %i", card_name, card->dev->id); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig index f0cdf89b8503..83ba8a2eb6af 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig @@ -2,6 +2,7 @@ config USB_ASPEED_VHUB tristate "Aspeed vHub UDC driver" depends on ARCH_ASPEED || COMPILE_TEST + depends on USB_LIBCOMPOSITE help USB peripheral controller for the Aspeed AST2500 family SoCs supporting the "vHub" functionality and USB2.0 diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c index 20ffb03ff6ac..e2927fb083cf 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -108,6 +108,13 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) /* Check our state, cancel pending requests if needed */ if (ep->ep0.state != ep0_state_token) { EPDBG(ep, "wrong state\n"); + ast_vhub_nuke(ep, -EIO); + + /* + * Accept the packet regardless, this seems to happen + * when stalling a SETUP packet that has an OUT data + * phase. + */ ast_vhub_nuke(ep, 0); goto stall; } @@ -212,6 +219,8 @@ static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep, if (chunk && req->req.buf) memcpy(ep->buf, req->req.buf + req->req.actual, chunk); + vhub_dma_workaround(ep->buf); + /* Remember chunk size and trigger send */ reg = VHUB_EP0_SET_TX_LEN(chunk); writel(reg, ep->ep0.ctlstat); @@ -224,7 +233,7 @@ static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep) EPVDBG(ep, "rx prime\n"); /* Prime endpoint for receiving data */ - writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat + AST_VHUB_EP0_CTRL); + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); } static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req, diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 80c9feac5147..5939eb1e97f2 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -66,11 +66,16 @@ static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) if (!req->req.dma) { /* For IN transfers, copy data over first */ - if (ep->epn.is_in) + if (ep->epn.is_in) { memcpy(ep->buf, req->req.buf + act, chunk); + vhub_dma_workaround(ep->buf); + } writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); - } else + } else { + if (ep->epn.is_in) + vhub_dma_workaround(req->req.buf); writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } /* Start DMA */ req->active = true; @@ -161,6 +166,7 @@ static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, struct ast_vhub_req *req) { + struct ast_vhub_desc *desc = NULL; unsigned int act = req->act_count; unsigned int len = req->req.length; unsigned int chunk; @@ -177,7 +183,6 @@ static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, /* While we can create descriptors */ while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { - struct ast_vhub_desc *desc; unsigned int d_num; /* Grab next free descriptor */ @@ -227,6 +232,9 @@ static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, req->act_count = act = act + chunk; } + if (likely(desc)) + vhub_dma_workaround(desc); + /* Tell HW about new descriptors */ writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), ep->epn.regs + AST_VHUB_EP_DESC_STATUS); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index 2b040257bc1f..4ed03d33a5a9 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -462,6 +462,39 @@ enum std_req_rc { #define DDBG(d, fmt, ...) do { } while(0) #endif +static inline void vhub_dma_workaround(void *addr) +{ + /* + * This works around a confirmed HW issue with the Aspeed chip. + * + * The core uses a different bus to memory than the AHB going to + * the USB device controller. Due to the latter having a higher + * priority than the core for arbitration on that bus, it's + * possible for an MMIO to the device, followed by a DMA by the + * device from memory to all be performed and services before + * a previous store to memory gets completed. + * + * This the following scenario can happen: + * + * - Driver writes to a DMA descriptor (Mbus) + * - Driver writes to the MMIO register to start the DMA (AHB) + * - The gadget sees the second write and sends a read of the + * descriptor to the memory controller (Mbus) + * - The gadget hits memory before the descriptor write + * causing it to read an obsolete value. + * + * Thankfully the problem is limited to the USB gadget device, other + * masters in the SoC all have a lower priority than the core, thus + * ensuring that the store by the core arrives first. + * + * The workaround consists of using a dummy read of the memory before + * doing the MMIO writes. This will ensure that the previous writes + * have been "pushed out". + */ + mb(); + (void)__raw_readl((void __iomem *)addr); +} + /* core.c */ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, int status); diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index a3ecce62662b..11e25a3f4f1f 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -832,11 +832,11 @@ static void init_controller(struct r8a66597 *r8a66597) r8a66597_bset(r8a66597, XCKE, SYSCFG0); - msleep(3); + mdelay(3); r8a66597_bset(r8a66597, PLLC, SYSCFG0); - msleep(1); + mdelay(1); r8a66597_bset(r8a66597, SCKE, SYSCFG0); @@ -1190,7 +1190,7 @@ __acquires(r8a66597->lock) r8a66597->ep0_req->length = 2; /* AV: what happens if we get called again before that gets through? */ spin_unlock(&r8a66597->lock); - r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_KERNEL); + r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_ATOMIC); spin_lock(&r8a66597->lock); } diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 1fbfd89d0a0f..387f124a8334 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -508,16 +508,18 @@ static int xhci_do_dbc_start(struct xhci_hcd *xhci) return 0; } -static void xhci_do_dbc_stop(struct xhci_hcd *xhci) +static int xhci_do_dbc_stop(struct xhci_hcd *xhci) { struct xhci_dbc *dbc = xhci->dbc; if (dbc->state == DS_DISABLED) - return; + return -1; writel(0, &dbc->regs->control); xhci_dbc_mem_cleanup(xhci); dbc->state = DS_DISABLED; + + return 0; } static int xhci_dbc_start(struct xhci_hcd *xhci) @@ -544,6 +546,7 @@ static int xhci_dbc_start(struct xhci_hcd *xhci) static void xhci_dbc_stop(struct xhci_hcd *xhci) { + int ret; unsigned long flags; struct xhci_dbc *dbc = xhci->dbc; struct dbc_port *port = &dbc->port; @@ -556,10 +559,11 @@ static void xhci_dbc_stop(struct xhci_hcd *xhci) xhci_dbc_tty_unregister_device(xhci); spin_lock_irqsave(&dbc->lock, flags); - xhci_do_dbc_stop(xhci); + ret = xhci_do_dbc_stop(xhci); spin_unlock_irqrestore(&dbc->lock, flags); - pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); + if (!ret) + pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); } static void diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8a62eee9eee1..ef350c33dc4a 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -595,7 +595,7 @@ struct xhci_ring *xhci_stream_id_to_ring( if (!ep->stream_info) return NULL; - if (stream_id > ep->stream_info->num_streams) + if (stream_id >= ep->stream_info->num_streams) return NULL; return ep->stream_info->stream_rings[stream_id]; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2f4850f25e82..68e6132aa8b2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3051,6 +3051,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, if (!list_empty(&ep->ring->td_list)) { dev_err(&udev->dev, "EP not empty, refuse reset\n"); spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cfg_cmd); goto cleanup; } xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 8abb6cbbd98a..3be40eaa1ac9 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -396,8 +396,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct usb_yurex *dev; - int retval = 0; - int bytes_read = 0; + int len = 0; char in_buffer[20]; unsigned long flags; @@ -405,26 +404,16 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, mutex_lock(&dev->io_mutex); if (!dev->interface) { /* already disconnected */ - retval = -ENODEV; - goto exit; + mutex_unlock(&dev->io_mutex); + return -ENODEV; } spin_lock_irqsave(&dev->lock, flags); - bytes_read = snprintf(in_buffer, 20, "%lld\n", dev->bbu); + len = snprintf(in_buffer, 20, "%lld\n", dev->bbu); spin_unlock_irqrestore(&dev->lock, flags); - - if (*ppos < bytes_read) { - if (copy_to_user(buffer, in_buffer + *ppos, bytes_read - *ppos)) - retval = -EFAULT; - else { - retval = bytes_read - *ppos; - *ppos += bytes_read; - } - } - -exit: mutex_unlock(&dev->io_mutex); - return retval; + + return simple_read_from_buffer(buffer, count, ppos, in_buffer, len); } static ssize_t yurex_write(struct file *file, const char __user *user_buffer, diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 900875f326d7..f7c96d209eda 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -861,6 +861,7 @@ int usb_otg_start(struct platform_device *pdev) if (pdata->init && pdata->init(pdev) != 0) return -EINVAL; +#ifdef CONFIG_PPC32 if (pdata->big_endian_mmio) { _fsl_readl = _fsl_readl_be; _fsl_writel = _fsl_writel_be; @@ -868,6 +869,7 @@ int usb_otg_start(struct platform_device *pdev) _fsl_readl = _fsl_readl_le; _fsl_writel = _fsl_writel_le; } +#endif /* request irq */ p_otg->irq = platform_get_irq(pdev, 0); @@ -958,7 +960,7 @@ int usb_otg_start(struct platform_device *pdev) /* * state file in sysfs */ -static int show_fsl_usb2_otg_state(struct device *dev, +static ssize_t show_fsl_usb2_otg_state(struct device *dev, struct device_attribute *attr, char *buf) { struct otg_fsm *fsm = &fsl_otg_dev->fsm; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index bdd7a5ad3bf1..3bb1fff02bed 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -128,7 +128,7 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - if (r < bufsize) { + if (r < (int)bufsize) { if (r >= 0) { dev_err(&dev->dev, "short control message received (%d < %u)\n", diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ee0cc1d90b51..626a29d9aa58 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -149,6 +149,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ + { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 5169624d8b11..38d43c4b7ce5 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -369,8 +369,10 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, 0, 0, data, 1, 2000); - if (rc >= 0) + if (rc == 1) *value = *data; + else if (rc >= 0) + rc = -EIO; kfree(data); return rc; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index fdceb46d9fc6..b580b4c7fa48 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -468,6 +468,9 @@ static void mos7840_control_callback(struct urb *urb) } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + if (urb->actual_length < 1) + goto out; + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index d961f1ec0e08..d1d20252bad8 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -725,6 +725,9 @@ static int tcpm_set_current_limit(struct tcpm_port *port, u32 max_ma, u32 mv) tcpm_log(port, "Setting voltage/current limit %u mV %u mA", mv, max_ma); + port->supply_voltage = mv; + port->current_limit = max_ma; + if (port->tcpc->set_current_limit) ret = port->tcpc->set_current_limit(port->tcpc, max_ma, mv); @@ -2137,7 +2140,7 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) * PPS APDO. Again skip the first sink PDO as this will * always be 5V 3A. */ - for (j = i; j < port->nr_snk_pdo; j++) { + for (j = 1; j < port->nr_snk_pdo; j++) { pdo = port->snk_pdo[j]; switch (pdo_type(pdo)) { @@ -2595,8 +2598,6 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_set_attached_state(port, false); port->try_src_count = 0; port->try_snk_count = 0; - port->supply_voltage = 0; - port->current_limit = 0; port->usb_type = POWER_SUPPLY_USB_TYPE_C; power_supply_changed(port->psy); |