diff options
Diffstat (limited to 'drivers/usb/host')
49 files changed, 467 insertions, 3265 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index fafc628480e0..5ad60e46dc2b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -219,7 +219,7 @@ config USB_EHCI_TEGRA config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on PPC_OF + depends on PPC default y ---help--- Enables support for the USB controller present on the PowerPC @@ -331,20 +331,6 @@ config USB_ISP116X_HCD To compile this driver as a module, choose M here: the module will be called isp116x-hcd. -config USB_ISP1760_HCD - tristate "ISP 1760 HCD support" - ---help--- - The ISP1760 chip is a USB 2.0 host controller. - - This driver does not support isochronous transfers or OTG. - This USB controller is usually attached to a non-DMA-Master - capable bus. NXP's eval kit brings this chip on PCI card - where the chip itself is behind a PLB to simulate such - a bus. - - To compile this driver as a module, choose M here: the - module will be called isp1760. - config USB_ISP1362_HCD tristate "ISP1362 HCD support" ---help--- @@ -494,7 +480,7 @@ config USB_OHCI_ATH79 config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" - depends on PPC_OF + depends on PPC select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO ---help--- @@ -503,7 +489,7 @@ config USB_OHCI_HCD_PPC_OF_BE config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" - depends on PPC_OF + depends on PPC select USB_OHCI_LITTLE_ENDIAN ---help--- Enables support for little-endian USB controllers present on the @@ -511,7 +497,7 @@ config USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PPC_OF bool - depends on PPC_OF + depends on PPC default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index d6216a493bab..65b0b6a58599 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -5,8 +5,6 @@ # tell define_trace.h where to find the xhci trace header CFLAGS_xhci-trace.o := -I$(src) -isp1760-y := isp1760-hcd.o isp1760-if.o - fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o @@ -69,7 +67,6 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 56a88506febe..663f7908b15c 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -27,44 +27,66 @@ #define DRIVER_DESC "EHCI Atmel driver" static const char hcd_name[] = "ehci-atmel"; -static struct hc_driver __read_mostly ehci_atmel_hc_driver; /* interface and function clocks */ -static struct clk *iclk, *fclk, *uclk; -static int clocked; +#define hcd_to_atmel_ehci_priv(h) \ + ((struct atmel_ehci_priv *)hcd_to_ehci(h)->priv) + +struct atmel_ehci_priv { + struct clk *iclk; + struct clk *fclk; + struct clk *uclk; + bool clocked; +}; + +static struct hc_driver __read_mostly ehci_atmel_hc_driver; + +static const struct ehci_driver_overrides ehci_atmel_drv_overrides __initconst = { + .extra_priv_size = sizeof(struct atmel_ehci_priv), +}; /*-------------------------------------------------------------------------*/ -static void atmel_start_clock(void) +static void atmel_start_clock(struct atmel_ehci_priv *atmel_ehci) { + if (atmel_ehci->clocked) + return; if (IS_ENABLED(CONFIG_COMMON_CLK)) { - clk_set_rate(uclk, 48000000); - clk_prepare_enable(uclk); + clk_set_rate(atmel_ehci->uclk, 48000000); + clk_prepare_enable(atmel_ehci->uclk); } - clk_prepare_enable(iclk); - clk_prepare_enable(fclk); - clocked = 1; + clk_prepare_enable(atmel_ehci->iclk); + clk_prepare_enable(atmel_ehci->fclk); + atmel_ehci->clocked = true; } -static void atmel_stop_clock(void) +static void atmel_stop_clock(struct atmel_ehci_priv *atmel_ehci) { - clk_disable_unprepare(fclk); - clk_disable_unprepare(iclk); + if (!atmel_ehci->clocked) + return; + clk_disable_unprepare(atmel_ehci->fclk); + clk_disable_unprepare(atmel_ehci->iclk); if (IS_ENABLED(CONFIG_COMMON_CLK)) - clk_disable_unprepare(uclk); - clocked = 0; + clk_disable_unprepare(atmel_ehci->uclk); + atmel_ehci->clocked = false; } static void atmel_start_ehci(struct platform_device *pdev) { + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); + dev_dbg(&pdev->dev, "start\n"); - atmel_start_clock(); + atmel_start_clock(atmel_ehci); } static void atmel_stop_ehci(struct platform_device *pdev) { + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); + dev_dbg(&pdev->dev, "stop\n"); - atmel_stop_clock(); + atmel_stop_clock(atmel_ehci); } /*-------------------------------------------------------------------------*/ @@ -75,6 +97,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) const struct hc_driver *driver = &ehci_atmel_hc_driver; struct resource *res; struct ehci_hcd *ehci; + struct atmel_ehci_priv *atmel_ehci; int irq; int retval; @@ -105,6 +128,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) retval = -ENOMEM; goto fail_create_hcd; } + atmel_ehci = hcd_to_atmel_ehci_priv(hcd); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); @@ -116,23 +140,23 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - iclk = devm_clk_get(&pdev->dev, "ehci_clk"); - if (IS_ERR(iclk)) { + atmel_ehci->iclk = devm_clk_get(&pdev->dev, "ehci_clk"); + if (IS_ERR(atmel_ehci->iclk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); retval = -ENOENT; goto fail_request_resource; } - fclk = devm_clk_get(&pdev->dev, "uhpck"); - if (IS_ERR(fclk)) { + atmel_ehci->fclk = devm_clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(atmel_ehci->fclk)) { dev_err(&pdev->dev, "Error getting function clock\n"); retval = -ENOENT; goto fail_request_resource; } if (IS_ENABLED(CONFIG_COMMON_CLK)) { - uclk = devm_clk_get(&pdev->dev, "usb_clk"); - if (IS_ERR(uclk)) { + atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk"); + if (IS_ERR(atmel_ehci->uclk)) { dev_err(&pdev->dev, "failed to get uclk\n"); - retval = PTR_ERR(uclk); + retval = PTR_ERR(atmel_ehci->uclk); goto fail_request_resource; } } @@ -169,11 +193,35 @@ static int ehci_atmel_drv_remove(struct platform_device *pdev) usb_put_hcd(hcd); atmel_stop_ehci(pdev); - fclk = iclk = NULL; return 0; } +#ifdef CONFIG_PM +static int ehci_atmel_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); + int ret; + + ret = ehci_suspend(hcd, false); + if (ret) + return ret; + + atmel_stop_clock(atmel_ehci); + return 0; +} + +static int ehci_atmel_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); + + atmel_start_clock(atmel_ehci); + return ehci_resume(hcd, false); +} +#endif + #ifdef CONFIG_OF static const struct of_device_id atmel_ehci_dt_ids[] = { { .compatible = "atmel,at91sam9g45-ehci" }, @@ -183,12 +231,16 @@ static const struct of_device_id atmel_ehci_dt_ids[] = { MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids); #endif +static SIMPLE_DEV_PM_OPS(ehci_atmel_pm_ops, ehci_atmel_drv_suspend, + ehci_atmel_drv_resume); + static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, .remove = ehci_atmel_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "atmel-ehci", + .pm = &ehci_atmel_pm_ops, .of_match_table = of_match_ptr(atmel_ehci_dt_ids), }, }; @@ -199,7 +251,7 @@ static int __init ehci_atmel_init(void) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_atmel_hc_driver, NULL); + ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides); return platform_driver_register(&ehci_atmel_driver); } module_init(ehci_atmel_init); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index fb7bd0c7dc15..ab4eee3df97a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -709,7 +709,6 @@ static struct platform_driver ehci_fsl_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "fsl-ehci", - .owner = THIS_MODULE, .pm = EHCI_FSL_PM_OPS, }, }; diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 495b6fbcbcd9..21650044b09e 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -187,7 +187,6 @@ static struct platform_driver ehci_grlib_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "grlib-ehci", - .owner = THIS_MODULE, .of_match_table = ehci_hcd_grlib_of_match, }, }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 38bfeedae1d0..85e56d1abd23 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1110,7 +1110,7 @@ int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) EXPORT_SYMBOL_GPL(ehci_suspend); /* Returns 0 if power was preserved, 1 if power was lost */ -int ehci_resume(struct usb_hcd *hcd, bool hibernated) +int ehci_resume(struct usb_hcd *hcd, bool force_reset) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1124,12 +1124,12 @@ int ehci_resume(struct usb_hcd *hcd, bool hibernated) return 0; /* Controller is dead */ /* - * If CF is still set and we aren't resuming from hibernation + * If CF is still set and reset isn't forced * then we maintained suspend power. * Just undo the effect of ehci_suspend(). */ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF && - !hibernated) { + !force_reset) { int mask = INTR_MASK; ehci_prepare_ports_for_controller_resume(ehci); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 118edb7bdca2..87cf86f38b36 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -700,15 +700,15 @@ ehci_hub_descriptor ( memset(&desc->u.hs.DeviceRemovable[0], 0, temp); memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); - temp = 0x0008; /* per-port overcurrent reporting */ + temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */ if (HCS_PPC (ehci->hcs_params)) - temp |= 0x0001; /* per-port power control */ + temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */ else - temp |= 0x0002; /* no power switching */ + temp |= HUB_CHAR_NO_LPSM; /* no power switching */ #if 0 // re-enable when we support USB_PORT_FEAT_INDICATOR below. if (HCS_INDICATOR (ehci->hcs_params)) - temp |= 0x0080; /* per-port indicators (LEDs) */ + temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */ #endif desc->wHubCharacteristics = cpu_to_le16(temp); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 851006a0d97b..2a5d2fd76040 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -43,6 +43,24 @@ static inline bool is_intel_quark_x1000(struct pci_dev *pdev) } /* + * This is the list of PCI IDs for the devices that have EHCI USB class and + * specific drivers for that. One of the example is a ChipIdea device installed + * on some Intel MID platforms. + */ +static const struct pci_device_id bypass_pci_id_table[] = { + /* ChipIdea on Intel MID platform */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), }, + {} +}; + +static inline bool is_bypassed_id(struct pci_dev *pdev) +{ + return !!pci_match_id(bypass_pci_id_table, pdev); +} + +/* * 0x84 is the offset of in/out threshold register, * and it is the same offset as the register of 'hostpc'. */ @@ -352,6 +370,13 @@ static const struct ehci_driver_overrides pci_overrides __initconst = { /*-------------------------------------------------------------------------*/ +static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + if (is_bypassed_id(pdev)) + return -ENODEV; + return usb_hcd_pci_probe(pdev, id); +} + /* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids [] = { { /* handle any USB 2.0 EHCI controller */ @@ -370,7 +395,7 @@ static struct pci_driver ehci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, - .probe = usb_hcd_pci_probe, + .probe = ehci_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 8557803e6154..d8a75a51d6d4 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -43,7 +43,8 @@ struct ehci_platform_priv { struct clk *clks[EHCI_MAX_CLKS]; struct reset_control *rst; - struct phy *phy; + struct phy **phys; + int num_phys; }; static const char hcd_name[] = "ehci-platform"; @@ -78,7 +79,7 @@ static int ehci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); - int clk, ret; + int clk, ret, phy_num; for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { ret = clk_prepare_enable(priv->clks[clk]); @@ -86,20 +87,28 @@ static int ehci_platform_power_on(struct platform_device *dev) goto err_disable_clks; } - if (priv->phy) { - ret = phy_init(priv->phy); - if (ret) - goto err_disable_clks; - - ret = phy_power_on(priv->phy); - if (ret) - goto err_exit_phy; + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + if (priv->phys[phy_num]) { + ret = phy_init(priv->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(priv->phys[phy_num]); + if (ret) { + phy_exit(priv->phys[phy_num]); + goto err_exit_phy; + } + } } return 0; err_exit_phy: - phy_exit(priv->phy); + while (--phy_num >= 0) { + if (priv->phys[phy_num]) { + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); + } + } err_disable_clks: while (--clk >= 0) clk_disable_unprepare(priv->clks[clk]); @@ -111,11 +120,13 @@ static void ehci_platform_power_off(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); - int clk; + int clk, phy_num; - if (priv->phy) { - phy_power_off(priv->phy); - phy_exit(priv->phy); + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + if (priv->phys[phy_num]) { + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); + } } for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) @@ -143,7 +154,8 @@ static int ehci_platform_probe(struct platform_device *dev) struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); struct ehci_platform_priv *priv; struct ehci_hcd *ehci; - int err, irq, clk = 0; + const char *phy_name; + int err, irq, phy_num, clk = 0; if (usb_disabled()) return -ENODEV; @@ -155,7 +167,8 @@ static int ehci_platform_probe(struct platform_device *dev) if (!pdata) pdata = &ehci_platform_defaults; - err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + err = dma_coerce_mask_and_coherent(&dev->dev, + pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32)); if (err) return err; @@ -185,12 +198,42 @@ static int ehci_platform_probe(struct platform_device *dev) if (of_property_read_bool(dev->dev.of_node, "big-endian")) ehci->big_endian_mmio = ehci->big_endian_desc = 1; - priv->phy = devm_phy_get(&dev->dev, "usb"); - if (IS_ERR(priv->phy)) { - err = PTR_ERR(priv->phy); - if (err == -EPROBE_DEFER) - goto err_put_hcd; - priv->phy = NULL; + if (of_property_read_bool(dev->dev.of_node, + "needs-reset-on-resume")) + pdata->reset_on_resume = 1; + + priv->num_phys = of_count_phandle_with_args(dev->dev.of_node, + "phys", "#phy-cells"); + priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1; + + priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + err = of_property_read_string_index( + dev->dev.of_node, + "phy-names", phy_num, + &phy_name); + + if (err < 0) { + if (priv->num_phys > 1) { + dev_err(&dev->dev, "phy-names not provided"); + goto err_put_hcd; + } else + phy_name = "usb"; + } + + priv->phys[phy_num] = devm_phy_get(&dev->dev, + phy_name); + if (IS_ERR(priv->phys[phy_num])) { + err = PTR_ERR(priv->phys[phy_num]); + if ((priv->num_phys > 1) || + (err == -EPROBE_DEFER)) + goto err_put_hcd; + priv->phys[phy_num] = NULL; + } } for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { @@ -340,7 +383,7 @@ static int ehci_platform_resume(struct device *dev) return err; } - ehci_resume(hcd, false); + ehci_resume(hcd, pdata->reset_on_resume); return 0; } #endif /* CONFIG_PM_SLEEP */ @@ -349,6 +392,7 @@ static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, { .compatible = "wm,prizm-ehci", }, { .compatible = "generic-ehci", }, + { .compatible = "cavium,octeon-6335-ehci", }, {} }; MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index 7d75465d97c7..342816a7f8b1 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -325,6 +325,5 @@ static struct platform_driver ehci_hcd_msp_driver = { .remove = ehci_hcd_msp_drv_remove, .driver = { .name = "pmcmsp-ehci", - .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 547924796d29..1a10c8d542ca 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -234,7 +234,6 @@ static struct platform_driver ehci_hcd_ppc_of_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ppc-of-ehci", - .owner = THIS_MODULE, .of_match_table = ehci_hcd_ppc_of_match, }, }; diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 9b6e8d0eac43..3d86cc2ffe68 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -178,7 +178,6 @@ static struct platform_driver ehci_hcd_sead3_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "sead3-ehci", - .owner = THIS_MODULE, .pm = SEAD3_EHCI_PMOPS, } }; diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 0e0ce684aff3..5caf88d679e4 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -189,7 +189,6 @@ static struct platform_driver ehci_hcd_sh_driver = { .shutdown = ehci_hcd_sh_shutdown, .driver = { .name = "sh_ehci", - .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c index 0d247673c3ca..bdb93b6a356f 100644 --- a/drivers/usb/host/ehci-tilegx.c +++ b/drivers/usb/host/ehci-tilegx.c @@ -210,7 +210,6 @@ static struct platform_driver ehci_hcd_tilegx_driver = { .shutdown = ehci_hcd_tilegx_drv_shutdown, .driver = { .name = "tilegx-ehci", - .owner = THIS_MODULE, } }; diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index a2328361dc80..f54480850bb8 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -236,7 +236,6 @@ static struct platform_driver ehci_hcd_xilinx_of_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xilinx-of-ehci", - .owner = THIS_MODULE, .of_match_table = ehci_hcd_xilinx_of_match, }, }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 6f0577b0a5ae..52ef0844a180 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -871,7 +871,7 @@ extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr, #ifdef CONFIG_PM extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); -extern int ehci_resume(struct usb_hcd *hcd, bool hibernated); +extern int ehci_resume(struct usb_hcd *hcd, bool force_reset); #endif /* CONFIG_PM */ extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index 6af2512f8378..70116a65262c 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -32,8 +32,8 @@ static u8 root_hub_des[] = { 0x09, /* blength */ 0x29, /* bDescriptorType;hub-descriptor */ 0x01, /* bNbrPorts */ - 0x00, /* wHubCharacteristics */ - 0x00, + HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */ + 0x00, /* per-port power, no overcurrent */ 0x01, /* bPwrOn2pwrGood;2ms */ 0x00, /* bHubContrCurrent;0mA */ 0x00, /* DeviceRemoveable */ @@ -208,7 +208,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, { struct fhci_hcd *fhci = hcd_to_fhci(hcd); int retval = 0; - int len = 0; struct usb_hub_status *hub_status; struct usb_port_status *port_status; unsigned long flags; @@ -272,8 +271,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case GetHubDescriptor: memcpy(buf, root_hub_des, sizeof(root_hub_des)); - buf[3] = 0x11; /* per-port power, no ovrcrnt */ - len = (buf[0] < wLength) ? buf[0] : wLength; break; case GetHubStatus: hub_status = (struct usb_hub_status *)buf; @@ -281,7 +278,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); hub_status->wHubChange = cpu_to_le16(fhci->vroot_hub->hub.wHubChange); - len = 4; break; case GetPortStatus: port_status = (struct usb_port_status *)buf; @@ -289,7 +285,6 @@ int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, cpu_to_le16(fhci->vroot_hub->port.wPortStatus); port_status->wPortChange = cpu_to_le16(fhci->vroot_hub->port.wPortChange); - len = 4; break; case SetHubFeature: switch (wValue) { diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index ecf02b2623e8..475b21fd373b 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1521,8 +1521,8 @@ fotg210_hub_descriptor( memset(&desc->u.hs.DeviceRemovable[0], 0, temp); memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); - temp = 0x0008; /* per-port overcurrent reporting */ - temp |= 0x0002; /* no power switching */ + temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */ + temp |= HUB_CHAR_NO_LPSM; /* no power switching */ desc->wHubCharacteristics = cpu_to_le16(temp); } diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c index 664d2aa1239c..a83eefefffda 100644 --- a/drivers/usb/host/fusbh200-hcd.c +++ b/drivers/usb/host/fusbh200-hcd.c @@ -1479,8 +1479,8 @@ fusbh200_hub_descriptor ( memset(&desc->u.hs.DeviceRemovable[0], 0, temp); memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); - temp = 0x0008; /* per-port overcurrent reporting */ - temp |= 0x0002; /* no power switching */ + temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */ + temp |= HUB_CHAR_NO_LPSM; /* no power switching */ desc->wHubCharacteristics = cpu_to_le16(temp); } diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index eb4efba9f1ad..6a2ad550b120 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1482,9 +1482,8 @@ static int get_hub_descriptor(struct usb_hcd *hcd, desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; desc->wHubCharacteristics = (__force __u16) cpu_to_le16( - 0x0002 | /* No power switching */ - 0x0010 | /* No over current protection */ - 0); + HUB_CHAR_NO_LPSM | /* No power switching */ + HUB_CHAR_NO_OCPM); /* No over current protection */ desc->u.hs.DeviceRemovable[0] = 1 << 1; desc->u.hs.DeviceRemovable[1] = ~0; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 31c9c4d0fa0b..113d0cc6cc43 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -948,7 +948,10 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, desc->bHubContrCurrent = 0; desc->bNbrPorts = (u8) (reg & 0x3); /* Power switching, device type, overcurrent. */ - desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f)); + desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & + (HUB_CHAR_LPSM | + HUB_CHAR_COMPOUND | + HUB_CHAR_OCPM))); desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); /* ports removable, and legacy PortPwrCtrlMask */ desc->u.hs.DeviceRemovable[0] = 0; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 75e5876f9d7c..b32ab60cad1e 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1543,8 +1543,12 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, desc->bHubContrCurrent = 0; desc->bNbrPorts = reg & 0x3; /* Power switching, device type, overcurrent. */ - desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f); - DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f)); + desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & + (HUB_CHAR_LPSM | + HUB_CHAR_COMPOUND | + HUB_CHAR_OCPM)); + DBG(0, "%s: hubcharacteristics = %02x\n", __func__, + desc->wHubCharacteristics); desc->bPwrOn2PwrGood = (reg >> 24) & 0xff; /* ports removable, and legacy PortPwrCtrlMask */ desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c deleted file mode 100644 index 395649f357aa..000000000000 --- a/drivers/usb/host/isp1760-hcd.c +++ /dev/null @@ -1,2268 +0,0 @@ -/* - * Driver for the NXP ISP1760 chip - * - * However, the code might contain some bugs. What doesn't work for sure is: - * - ISO - * - OTG - e The interrupt line is configured as active low, level. - * - * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> - * - * (c) 2011 Arvid Brodin <arvid.brodin@enea.com> - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/usb.h> -#include <linux/usb/hcd.h> -#include <linux/debugfs.h> -#include <linux/uaccess.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <asm/unaligned.h> -#include <asm/cacheflush.h> -#include <linux/gpio.h> - -#include "isp1760-hcd.h" - -static struct kmem_cache *qtd_cachep; -static struct kmem_cache *qh_cachep; -static struct kmem_cache *urb_listitem_cachep; - -enum queue_head_types { - QH_CONTROL, - QH_BULK, - QH_INTERRUPT, - QH_END -}; - -struct isp1760_hcd { - u32 hcs_params; - spinlock_t lock; - struct slotinfo atl_slots[32]; - int atl_done_map; - struct slotinfo int_slots[32]; - int int_done_map; - struct memory_chunk memory_pool[BLOCKS]; - struct list_head qh_list[QH_END]; - - /* periodic schedule support */ -#define DEFAULT_I_TDPS 1024 - unsigned periodic_size; - unsigned i_thresh; - unsigned long reset_done; - unsigned long next_statechange; - unsigned int devflags; - - int rst_gpio; -}; - -static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) -{ - return (struct isp1760_hcd *) (hcd->hcd_priv); -} - -/* Section 2.2 Host Controller Capability Registers */ -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ - -/* Section 2.3 Host Controller Operational Registers */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ -#define STS_PCD (1<<2) /* port change detect */ -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC) - -struct isp1760_qtd { - u8 packet_type; - void *data_buffer; - u32 payload_addr; - - /* the rest is HCD-private */ - struct list_head qtd_list; - struct urb *urb; - size_t length; - size_t actual_length; - - /* QTD_ENQUEUED: waiting for transfer (inactive) */ - /* QTD_PAYLOAD_ALLOC: chip mem has been allocated for payload */ - /* QTD_XFER_STARTED: valid ptd has been written to isp176x - only - interrupt handler may touch this qtd! */ - /* QTD_XFER_COMPLETE: payload has been transferred successfully */ - /* QTD_RETIRE: transfer error/abort qtd */ -#define QTD_ENQUEUED 0 -#define QTD_PAYLOAD_ALLOC 1 -#define QTD_XFER_STARTED 2 -#define QTD_XFER_COMPLETE 3 -#define QTD_RETIRE 4 - u32 status; -}; - -/* Queue head, one for each active endpoint */ -struct isp1760_qh { - struct list_head qh_list; - struct list_head qtd_list; - u32 toggle; - u32 ping; - int slot; - int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */ -}; - -struct urb_listitem { - struct list_head urb_list; - struct urb *urb; -}; - -/* - * Access functions for isp176x registers (addresses 0..0x03FF). - */ -static u32 reg_read32(void __iomem *base, u32 reg) -{ - return readl(base + reg); -} - -static void reg_write32(void __iomem *base, u32 reg, u32 val) -{ - writel(val, base + reg); -} - -/* - * Access functions for isp176x memory (offset >= 0x0400). - * - * bank_reads8() reads memory locations prefetched by an earlier write to - * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi- - * bank optimizations, you should use the more generic mem_reads8() below. - * - * For access to ptd memory, use the specialized ptd_read() and ptd_write() - * below. - * - * These functions copy via MMIO data to/from the device. memcpy_{to|from}io() - * doesn't quite work because some people have to enforce 32-bit access - */ -static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr, - __u32 *dst, u32 bytes) -{ - __u32 __iomem *src; - u32 val; - __u8 *src_byteptr; - __u8 *dst_byteptr; - - src = src_base + (bank_addr | src_offset); - - if (src_offset < PAYLOAD_OFFSET) { - while (bytes >= 4) { - *dst = le32_to_cpu(__raw_readl(src)); - bytes -= 4; - src++; - dst++; - } - } else { - while (bytes >= 4) { - *dst = __raw_readl(src); - bytes -= 4; - src++; - dst++; - } - } - - if (!bytes) - return; - - /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully - * allocated. - */ - if (src_offset < PAYLOAD_OFFSET) - val = le32_to_cpu(__raw_readl(src)); - else - val = __raw_readl(src); - - dst_byteptr = (void *) dst; - src_byteptr = (void *) &val; - while (bytes > 0) { - *dst_byteptr = *src_byteptr; - dst_byteptr++; - src_byteptr++; - bytes--; - } -} - -static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst, - u32 bytes) -{ - reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0)); - ndelay(90); - bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes); -} - -static void mem_writes8(void __iomem *dst_base, u32 dst_offset, - __u32 const *src, u32 bytes) -{ - __u32 __iomem *dst; - - dst = dst_base + dst_offset; - - if (dst_offset < PAYLOAD_OFFSET) { - while (bytes >= 4) { - __raw_writel(cpu_to_le32(*src), dst); - bytes -= 4; - src++; - dst++; - } - } else { - while (bytes >= 4) { - __raw_writel(*src, dst); - bytes -= 4; - src++; - dst++; - } - } - - if (!bytes) - return; - /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the - * extra bytes should not be read by the HW. - */ - - if (dst_offset < PAYLOAD_OFFSET) - __raw_writel(cpu_to_le32(*src), dst); - else - __raw_writel(*src, dst); -} - -/* - * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET, - * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32. - */ -static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot, - struct ptd *ptd) -{ - reg_write32(base, HC_MEMORY_REG, - ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd)); - ndelay(90); - bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0), - (void *) ptd, sizeof(*ptd)); -} - -static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot, - struct ptd *ptd) -{ - mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0), - &ptd->dw1, 7*sizeof(ptd->dw1)); - /* Make sure dw0 gets written last (after other dw's and after payload) - since it contains the enable bit */ - wmb(); - mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0, - sizeof(ptd->dw0)); -} - - -/* memory management of the 60kb on the chip from 0x1000 to 0xffff */ -static void init_memory(struct isp1760_hcd *priv) -{ - int i, curr; - u32 payload_addr; - - payload_addr = PAYLOAD_OFFSET; - for (i = 0; i < BLOCK_1_NUM; i++) { - priv->memory_pool[i].start = payload_addr; - priv->memory_pool[i].size = BLOCK_1_SIZE; - priv->memory_pool[i].free = 1; - payload_addr += priv->memory_pool[i].size; - } - - curr = i; - for (i = 0; i < BLOCK_2_NUM; i++) { - priv->memory_pool[curr + i].start = payload_addr; - priv->memory_pool[curr + i].size = BLOCK_2_SIZE; - priv->memory_pool[curr + i].free = 1; - payload_addr += priv->memory_pool[curr + i].size; - } - - curr = i; - for (i = 0; i < BLOCK_3_NUM; i++) { - priv->memory_pool[curr + i].start = payload_addr; - priv->memory_pool[curr + i].size = BLOCK_3_SIZE; - priv->memory_pool[curr + i].free = 1; - payload_addr += priv->memory_pool[curr + i].size; - } - - WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE); -} - -static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int i; - - WARN_ON(qtd->payload_addr); - - if (!qtd->length) - return; - - for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].size >= qtd->length && - priv->memory_pool[i].free) { - priv->memory_pool[i].free = 0; - qtd->payload_addr = priv->memory_pool[i].start; - return; - } - } -} - -static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int i; - - if (!qtd->payload_addr) - return; - - for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].start == qtd->payload_addr) { - WARN_ON(priv->memory_pool[i].free); - priv->memory_pool[i].free = 1; - qtd->payload_addr = 0; - return; - } - } - - dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n", - __func__, qtd->payload_addr); - WARN_ON(1); - qtd->payload_addr = 0; -} - -static int handshake(struct usb_hcd *hcd, u32 reg, - u32 mask, u32 done, int usec) -{ - u32 result; - - do { - result = reg_read32(hcd->regs, reg); - if (result == ~0) - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; -} - -/* reset a non-running (STS_HALT == 1) controller */ -static int ehci_reset(struct usb_hcd *hcd) -{ - int retval; - struct isp1760_hcd *priv = hcd_to_priv(hcd); - - u32 command = reg_read32(hcd->regs, HC_USBCMD); - - command |= CMD_RESET; - reg_write32(hcd->regs, HC_USBCMD, command); - hcd->state = HC_STATE_HALT; - priv->next_statechange = jiffies; - retval = handshake(hcd, HC_USBCMD, - CMD_RESET, 0, 250 * 1000); - return retval; -} - -static struct isp1760_qh *qh_alloc(gfp_t flags) -{ - struct isp1760_qh *qh; - - qh = kmem_cache_zalloc(qh_cachep, flags); - if (!qh) - return NULL; - - INIT_LIST_HEAD(&qh->qh_list); - INIT_LIST_HEAD(&qh->qtd_list); - qh->slot = -1; - - return qh; -} - -static void qh_free(struct isp1760_qh *qh) -{ - WARN_ON(!list_empty(&qh->qtd_list)); - WARN_ON(qh->slot > -1); - kmem_cache_free(qh_cachep, qh); -} - -/* one-time init, only for memory state */ -static int priv_init(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 hcc_params; - int i; - - spin_lock_init(&priv->lock); - - for (i = 0; i < QH_END; i++) - INIT_LIST_HEAD(&priv->qh_list[i]); - - /* - * hw default: 1K periodic list heads, one per frame. - * periodic_size can shrink by USBCMD update if hcc_params allows. - */ - priv->periodic_size = DEFAULT_I_TDPS; - - /* controllers may cache some of the periodic schedule ... */ - hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS); - /* full frame cache */ - if (HCC_ISOC_CACHE(hcc_params)) - priv->i_thresh = 8; - else /* N microframes cached */ - priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); - - return 0; -} - -static int isp1760_hc_setup(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int result; - u32 scratch, hwmode; - - /* low-level chip reset */ - if (gpio_is_valid(priv->rst_gpio)) { - unsigned int rst_lvl; - - rst_lvl = (priv->devflags & - ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0; - - gpio_set_value(priv->rst_gpio, rst_lvl); - mdelay(50); - gpio_set_value(priv->rst_gpio, !rst_lvl); - } - - /* Setup HW Mode Control: This assumes a level active-low interrupt */ - hwmode = HW_DATA_BUS_32BIT; - - if (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) - hwmode &= ~HW_DATA_BUS_32BIT; - if (priv->devflags & ISP1760_FLAG_ANALOG_OC) - hwmode |= HW_ANA_DIGI_OC; - if (priv->devflags & ISP1760_FLAG_DACK_POL_HIGH) - hwmode |= HW_DACK_POL_HIGH; - if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH) - hwmode |= HW_DREQ_POL_HIGH; - if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH) - hwmode |= HW_INTR_HIGH_ACT; - if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG) - hwmode |= HW_INTR_EDGE_TRIG; - - /* - * We have to set this first in case we're in 16-bit mode. - * Write it twice to ensure correct upper bits if switching - * to 16-bit mode. - */ - reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - - reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe); - /* Change bus pattern */ - scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG); - scratch = reg_read32(hcd->regs, HC_SCRATCH_REG); - if (scratch != 0xdeadbabe) { - dev_err(hcd->self.controller, "Scratch test failed.\n"); - return -ENODEV; - } - - /* pre reset */ - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); - - /* reset */ - reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL); - mdelay(100); - - reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC); - mdelay(100); - - result = ehci_reset(hcd); - if (result) - return result; - - /* Step 11 passed */ - - dev_info(hcd->self.controller, "bus width: %d, oc: %s\n", - (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ? - 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ? - "analog" : "digital"); - - /* ATL reset */ - reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET); - mdelay(10); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - - reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK); - - /* - * PORT 1 Control register of the ISP1760 is the OTG control - * register on ISP1761. Since there is no OTG or device controller - * support in this driver, we use port 1 as a "normal" USB host port on - * both chips. - */ - reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2); - mdelay(10); - - priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS); - - return priv_init(hcd); -} - -static u32 base_to_chip(u32 base) -{ - return ((base - 0x400) >> 3); -} - -static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh) -{ - struct urb *urb; - - if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) - return 1; - - urb = qtd->urb; - qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); - return (qtd->urb != urb); -} - -/* magic numbers that can affect system performance */ -#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ -#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ -#define EHCI_TUNE_RL_TT 0 -#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ -#define EHCI_TUNE_MULT_TT 1 -#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ - -static void create_ptd_atl(struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct ptd *ptd) -{ - u32 maxpacket; - u32 multi; - u32 rl = RL_COUNTER; - u32 nak = NAK_COUNTER; - - memset(ptd, 0, sizeof(*ptd)); - - /* according to 3.6.2, max packet len can not be > 0x400 */ - maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe, - usb_pipeout(qtd->urb->pipe)); - multi = 1 + ((maxpacket >> 11) & 0x3); - maxpacket &= 0x7ff; - - /* DW0 */ - ptd->dw0 = DW0_VALID_BIT; - ptd->dw0 |= TO_DW0_LENGTH(qtd->length); - ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket); - ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe)); - - /* DW1 */ - ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1; - ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe)); - ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type); - - if (usb_pipebulk(qtd->urb->pipe)) - ptd->dw1 |= DW1_TRANS_BULK; - else if (usb_pipeint(qtd->urb->pipe)) - ptd->dw1 |= DW1_TRANS_INT; - - if (qtd->urb->dev->speed != USB_SPEED_HIGH) { - /* split transaction */ - - ptd->dw1 |= DW1_TRANS_SPLIT; - if (qtd->urb->dev->speed == USB_SPEED_LOW) - ptd->dw1 |= DW1_SE_USB_LOSPEED; - - ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport); - ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum); - - /* SE bit for Split INT transfers */ - if (usb_pipeint(qtd->urb->pipe) && - (qtd->urb->dev->speed == USB_SPEED_LOW)) - ptd->dw1 |= 2 << 16; - - rl = 0; - nak = 0; - } else { - ptd->dw0 |= TO_DW0_MULTI(multi); - if (usb_pipecontrol(qtd->urb->pipe) || - usb_pipebulk(qtd->urb->pipe)) - ptd->dw3 |= TO_DW3_PING(qh->ping); - } - /* DW2 */ - ptd->dw2 = 0; - ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr)); - ptd->dw2 |= TO_DW2_RL(rl); - - /* DW3 */ - ptd->dw3 |= TO_DW3_NAKCOUNT(nak); - ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle); - if (usb_pipecontrol(qtd->urb->pipe)) { - if (qtd->data_buffer == qtd->urb->setup_packet) - ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1); - else if (last_qtd_of_urb(qtd, qh)) - ptd->dw3 |= TO_DW3_DATA_TOGGLE(1); - } - - ptd->dw3 |= DW3_ACTIVE_BIT; - /* Cerr */ - ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER); -} - -static void transform_add_int(struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct ptd *ptd) -{ - u32 usof; - u32 period; - - /* - * Most of this is guessing. ISP1761 datasheet is quite unclear, and - * the algorithm from the original Philips driver code, which was - * pretty much used in this driver before as well, is quite horrendous - * and, i believe, incorrect. The code below follows the datasheet and - * USB2.0 spec as far as I can tell, and plug/unplug seems to be much - * more reliable this way (fingers crossed...). - */ - - if (qtd->urb->dev->speed == USB_SPEED_HIGH) { - /* urb->interval is in units of microframes (1/8 ms) */ - period = qtd->urb->interval >> 3; - - if (qtd->urb->interval > 4) - usof = 0x01; /* One bit set => - interval 1 ms * uFrame-match */ - else if (qtd->urb->interval > 2) - usof = 0x22; /* Two bits set => interval 1/2 ms */ - else if (qtd->urb->interval > 1) - usof = 0x55; /* Four bits set => interval 1/4 ms */ - else - usof = 0xff; /* All bits set => interval 1/8 ms */ - } else { - /* urb->interval is in units of frames (1 ms) */ - period = qtd->urb->interval; - usof = 0x0f; /* Execute Start Split on any of the - four first uFrames */ - - /* - * First 8 bits in dw5 is uSCS and "specifies which uSOF the - * complete split needs to be sent. Valid only for IN." Also, - * "All bits can be set to one for every transfer." (p 82, - * ISP1761 data sheet.) 0x1c is from Philips driver. Where did - * that number come from? 0xff seems to work fine... - */ - /* ptd->dw5 = 0x1c; */ - ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */ - } - - period = period >> 1;/* Ensure equal or shorter period than requested */ - period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */ - - ptd->dw2 |= period; - ptd->dw4 = usof; -} - -static void create_ptd_int(struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct ptd *ptd) -{ - create_ptd_atl(qh, qtd, ptd); - transform_add_int(qh, qtd, ptd); -} - -static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb) -__releases(priv->lock) -__acquires(priv->lock) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - - if (!urb->unlinked) { - if (urb->status == -EINPROGRESS) - urb->status = 0; - } - - if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { - void *ptr; - for (ptr = urb->transfer_buffer; - ptr < urb->transfer_buffer + urb->transfer_buffer_length; - ptr += PAGE_SIZE) - flush_dcache_page(virt_to_page(ptr)); - } - - /* complete() can reenter this HCD */ - usb_hcd_unlink_urb_from_ep(hcd, urb); - spin_unlock(&priv->lock); - usb_hcd_giveback_urb(hcd, urb, urb->status); - spin_lock(&priv->lock); -} - -static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb, - u8 packet_type) -{ - struct isp1760_qtd *qtd; - - qtd = kmem_cache_zalloc(qtd_cachep, flags); - if (!qtd) - return NULL; - - INIT_LIST_HEAD(&qtd->qtd_list); - qtd->urb = urb; - qtd->packet_type = packet_type; - qtd->status = QTD_ENQUEUED; - qtd->actual_length = 0; - - return qtd; -} - -static void qtd_free(struct isp1760_qtd *qtd) -{ - WARN_ON(qtd->payload_addr); - kmem_cache_free(qtd_cachep, qtd); -} - -static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, - struct slotinfo *slots, struct isp1760_qtd *qtd, - struct isp1760_qh *qh, struct ptd *ptd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int skip_map; - - WARN_ON((slot < 0) || (slot > 31)); - WARN_ON(qtd->length && !qtd->payload_addr); - WARN_ON(slots[slot].qtd); - WARN_ON(slots[slot].qh); - WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC); - - /* Make sure done map has not triggered from some unlinked transfer */ - if (ptd_offset == ATL_PTD_OFFSET) { - priv->atl_done_map |= reg_read32(hcd->regs, - HC_ATL_PTD_DONEMAP_REG); - priv->atl_done_map &= ~(1 << slot); - } else { - priv->int_done_map |= reg_read32(hcd->regs, - HC_INT_PTD_DONEMAP_REG); - priv->int_done_map &= ~(1 << slot); - } - - qh->slot = slot; - qtd->status = QTD_XFER_STARTED; - slots[slot].timestamp = jiffies; - slots[slot].qtd = qtd; - slots[slot].qh = qh; - ptd_write(hcd->regs, ptd_offset, slot, ptd); - - if (ptd_offset == ATL_PTD_OFFSET) { - skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - skip_map &= ~(1 << qh->slot); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - } else { - skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - skip_map &= ~(1 << qh->slot); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); - } -} - -static int is_short_bulk(struct isp1760_qtd *qtd) -{ - return (usb_pipebulk(qtd->urb->pipe) && - (qtd->actual_length < qtd->length)); -} - -static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, - struct list_head *urb_list) -{ - int last_qtd; - struct isp1760_qtd *qtd, *qtd_next; - struct urb_listitem *urb_listitem; - - list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) { - if (qtd->status < QTD_XFER_COMPLETE) - break; - - last_qtd = last_qtd_of_urb(qtd, qh); - - if ((!last_qtd) && (qtd->status == QTD_RETIRE)) - qtd_next->status = QTD_RETIRE; - - if (qtd->status == QTD_XFER_COMPLETE) { - if (qtd->actual_length) { - switch (qtd->packet_type) { - case IN_PID: - mem_reads8(hcd->regs, qtd->payload_addr, - qtd->data_buffer, - qtd->actual_length); - /* Fall through (?) */ - case OUT_PID: - qtd->urb->actual_length += - qtd->actual_length; - /* Fall through ... */ - case SETUP_PID: - break; - } - } - - if (is_short_bulk(qtd)) { - if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) - qtd->urb->status = -EREMOTEIO; - if (!last_qtd) - qtd_next->status = QTD_RETIRE; - } - } - - if (qtd->payload_addr) - free_mem(hcd, qtd); - - if (last_qtd) { - if ((qtd->status == QTD_RETIRE) && - (qtd->urb->status == -EINPROGRESS)) - qtd->urb->status = -EPIPE; - /* Defer calling of urb_done() since it releases lock */ - urb_listitem = kmem_cache_zalloc(urb_listitem_cachep, - GFP_ATOMIC); - if (unlikely(!urb_listitem)) - break; /* Try again on next call */ - urb_listitem->urb = qtd->urb; - list_add_tail(&urb_listitem->urb_list, urb_list); - } - - list_del(&qtd->qtd_list); - qtd_free(qtd); - } -} - -#define ENQUEUE_DEPTH 2 -static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int ptd_offset; - struct slotinfo *slots; - int curr_slot, free_slot; - int n; - struct ptd ptd; - struct isp1760_qtd *qtd; - - if (unlikely(list_empty(&qh->qtd_list))) { - WARN_ON(1); - return; - } - - /* Make sure this endpoint's TT buffer is clean before queueing ptds */ - if (qh->tt_buffer_dirty) - return; - - if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd, - qtd_list)->urb->pipe)) { - ptd_offset = INT_PTD_OFFSET; - slots = priv->int_slots; - } else { - ptd_offset = ATL_PTD_OFFSET; - slots = priv->atl_slots; - } - - free_slot = -1; - for (curr_slot = 0; curr_slot < 32; curr_slot++) { - if ((free_slot == -1) && (slots[curr_slot].qtd == NULL)) - free_slot = curr_slot; - if (slots[curr_slot].qh == qh) - break; - } - - n = 0; - list_for_each_entry(qtd, &qh->qtd_list, qtd_list) { - if (qtd->status == QTD_ENQUEUED) { - WARN_ON(qtd->payload_addr); - alloc_mem(hcd, qtd); - if ((qtd->length) && (!qtd->payload_addr)) - break; - - if ((qtd->length) && - ((qtd->packet_type == SETUP_PID) || - (qtd->packet_type == OUT_PID))) { - mem_writes8(hcd->regs, qtd->payload_addr, - qtd->data_buffer, qtd->length); - } - - qtd->status = QTD_PAYLOAD_ALLOC; - } - - if (qtd->status == QTD_PAYLOAD_ALLOC) { -/* - if ((curr_slot > 31) && (free_slot == -1)) - dev_dbg(hcd->self.controller, "%s: No slot " - "available for transfer\n", __func__); -*/ - /* Start xfer for this endpoint if not already done */ - if ((curr_slot > 31) && (free_slot > -1)) { - if (usb_pipeint(qtd->urb->pipe)) - create_ptd_int(qh, qtd, &ptd); - else - create_ptd_atl(qh, qtd, &ptd); - - start_bus_transfer(hcd, ptd_offset, free_slot, - slots, qtd, qh, &ptd); - curr_slot = free_slot; - } - - n++; - if (n >= ENQUEUE_DEPTH) - break; - } - } -} - -static void schedule_ptds(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv; - struct isp1760_qh *qh, *qh_next; - struct list_head *ep_queue; - LIST_HEAD(urb_list); - struct urb_listitem *urb_listitem, *urb_listitem_next; - int i; - - if (!hcd) { - WARN_ON(1); - return; - } - - priv = hcd_to_priv(hcd); - - /* - * check finished/retired xfers, transfer payloads, call urb_done() - */ - for (i = 0; i < QH_END; i++) { - ep_queue = &priv->qh_list[i]; - list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) { - collect_qtds(hcd, qh, &urb_list); - if (list_empty(&qh->qtd_list)) - list_del(&qh->qh_list); - } - } - - list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list, - urb_list) { - isp1760_urb_done(hcd, urb_listitem->urb); - kmem_cache_free(urb_listitem_cachep, urb_listitem); - } - - /* - * Schedule packets for transfer. - * - * According to USB2.0 specification: - * - * 1st prio: interrupt xfers, up to 80 % of bandwidth - * 2nd prio: control xfers - * 3rd prio: bulk xfers - * - * ... but let's use a simpler scheme here (mostly because ISP1761 doc - * is very unclear on how to prioritize traffic): - * - * 1) Enqueue any queued control transfers, as long as payload chip mem - * and PTD ATL slots are available. - * 2) Enqueue any queued INT transfers, as long as payload chip mem - * and PTD INT slots are available. - * 3) Enqueue any queued bulk transfers, as long as payload chip mem - * and PTD ATL slots are available. - * - * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between - * conservation of chip mem and performance. - * - * I'm sure this scheme could be improved upon! - */ - for (i = 0; i < QH_END; i++) { - ep_queue = &priv->qh_list[i]; - list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) - enqueue_qtds(hcd, qh); - } -} - -#define PTD_STATE_QTD_DONE 1 -#define PTD_STATE_QTD_RELOAD 2 -#define PTD_STATE_URB_RETIRE 3 - -static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd, - struct urb *urb) -{ - __dw dw4; - int i; - - dw4 = ptd->dw4; - dw4 >>= 8; - - /* FIXME: ISP1761 datasheet does not say what to do with these. Do we - need to handle these errors? Is it done in hardware? */ - - if (ptd->dw3 & DW3_HALT_BIT) { - - urb->status = -EPROTO; /* Default unknown error */ - - for (i = 0; i < 8; i++) { - switch (dw4 & 0x7) { - case INT_UNDERRUN: - dev_dbg(hcd->self.controller, "%s: underrun " - "during uFrame %d\n", - __func__, i); - urb->status = -ECOMM; /* Could not write data */ - break; - case INT_EXACT: - dev_dbg(hcd->self.controller, "%s: transaction " - "error during uFrame %d\n", - __func__, i); - urb->status = -EPROTO; /* timeout, bad CRC, PID - error etc. */ - break; - case INT_BABBLE: - dev_dbg(hcd->self.controller, "%s: babble " - "error during uFrame %d\n", - __func__, i); - urb->status = -EOVERFLOW; - break; - } - dw4 >>= 3; - } - - return PTD_STATE_URB_RETIRE; - } - - return PTD_STATE_QTD_DONE; -} - -static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd, - struct urb *urb) -{ - WARN_ON(!ptd); - if (ptd->dw3 & DW3_HALT_BIT) { - if (ptd->dw3 & DW3_BABBLE_BIT) - urb->status = -EOVERFLOW; - else if (FROM_DW3_CERR(ptd->dw3)) - urb->status = -EPIPE; /* Stall */ - else if (ptd->dw3 & DW3_ERROR_BIT) - urb->status = -EPROTO; /* XactErr */ - else - urb->status = -EPROTO; /* Unknown */ -/* - dev_dbg(hcd->self.controller, "%s: ptd error:\n" - " dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n" - " dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n", - __func__, - ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3, - ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7); -*/ - return PTD_STATE_URB_RETIRE; - } - - if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) { - /* Transfer Error, *but* active and no HALT -> reload */ - dev_dbg(hcd->self.controller, "PID error; reloading ptd\n"); - return PTD_STATE_QTD_RELOAD; - } - - if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) { - /* - * NAKs are handled in HW by the chip. Usually if the - * device is not able to send data fast enough. - * This happens mostly on slower hardware. - */ - return PTD_STATE_QTD_RELOAD; - } - - return PTD_STATE_QTD_DONE; -} - -static void handle_done_ptds(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - struct ptd ptd; - struct isp1760_qh *qh; - int slot; - int state; - struct slotinfo *slots; - u32 ptd_offset; - struct isp1760_qtd *qtd; - int modified; - int skip_map; - - skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - priv->int_done_map &= ~skip_map; - skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - priv->atl_done_map &= ~skip_map; - - modified = priv->int_done_map || priv->atl_done_map; - - while (priv->int_done_map || priv->atl_done_map) { - if (priv->int_done_map) { - /* INT ptd */ - slot = __ffs(priv->int_done_map); - priv->int_done_map &= ~(1 << slot); - slots = priv->int_slots; - /* This should not trigger, and could be removed if - noone have any problems with it triggering: */ - if (!slots[slot].qh) { - WARN_ON(1); - continue; - } - ptd_offset = INT_PTD_OFFSET; - ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd); - state = check_int_transfer(hcd, &ptd, - slots[slot].qtd->urb); - } else { - /* ATL ptd */ - slot = __ffs(priv->atl_done_map); - priv->atl_done_map &= ~(1 << slot); - slots = priv->atl_slots; - /* This should not trigger, and could be removed if - noone have any problems with it triggering: */ - if (!slots[slot].qh) { - WARN_ON(1); - continue; - } - ptd_offset = ATL_PTD_OFFSET; - ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); - state = check_atl_transfer(hcd, &ptd, - slots[slot].qtd->urb); - } - - qtd = slots[slot].qtd; - slots[slot].qtd = NULL; - qh = slots[slot].qh; - slots[slot].qh = NULL; - qh->slot = -1; - - WARN_ON(qtd->status != QTD_XFER_STARTED); - - switch (state) { - case PTD_STATE_QTD_DONE: - if ((usb_pipeint(qtd->urb->pipe)) && - (qtd->urb->dev->speed != USB_SPEED_HIGH)) - qtd->actual_length = - FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3); - else - qtd->actual_length = - FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3); - - qtd->status = QTD_XFER_COMPLETE; - if (list_is_last(&qtd->qtd_list, &qh->qtd_list) || - is_short_bulk(qtd)) - qtd = NULL; - else - qtd = list_entry(qtd->qtd_list.next, - typeof(*qtd), qtd_list); - - qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); - qh->ping = FROM_DW3_PING(ptd.dw3); - break; - - case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */ - qtd->status = QTD_PAYLOAD_ALLOC; - ptd.dw0 |= DW0_VALID_BIT; - /* RL counter = ERR counter */ - ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf); - ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2)); - ptd.dw3 &= ~TO_DW3_CERR(3); - ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER); - qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); - qh->ping = FROM_DW3_PING(ptd.dw3); - break; - - case PTD_STATE_URB_RETIRE: - qtd->status = QTD_RETIRE; - if ((qtd->urb->dev->speed != USB_SPEED_HIGH) && - (qtd->urb->status != -EPIPE) && - (qtd->urb->status != -EREMOTEIO)) { - qh->tt_buffer_dirty = 1; - if (usb_hub_clear_tt_buffer(qtd->urb)) - /* Clear failed; let's hope things work - anyway */ - qh->tt_buffer_dirty = 0; - } - qtd = NULL; - qh->toggle = 0; - qh->ping = 0; - break; - - default: - WARN_ON(1); - continue; - } - - if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) { - if (slots == priv->int_slots) { - if (state == PTD_STATE_QTD_RELOAD) - dev_err(hcd->self.controller, - "%s: PTD_STATE_QTD_RELOAD on " - "interrupt packet\n", __func__); - if (state != PTD_STATE_QTD_RELOAD) - create_ptd_int(qh, qtd, &ptd); - } else { - if (state != PTD_STATE_QTD_RELOAD) - create_ptd_atl(qh, qtd, &ptd); - } - - start_bus_transfer(hcd, ptd_offset, slot, slots, qtd, - qh, &ptd); - } - } - - if (modified) - schedule_ptds(hcd); -} - -static irqreturn_t isp1760_irq(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 imask; - irqreturn_t irqret = IRQ_NONE; - - spin_lock(&priv->lock); - - if (!(hcd->state & HC_STATE_RUNNING)) - goto leave; - - imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); - if (unlikely(!imask)) - goto leave; - reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */ - - priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); - priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); - - handle_done_ptds(hcd); - - irqret = IRQ_HANDLED; -leave: - spin_unlock(&priv->lock); - - return irqret; -} - -/* - * Workaround for problem described in chip errata 2: - * - * Sometimes interrupts are not generated when ATL (not INT?) completion occurs. - * One solution suggested in the errata is to use SOF interrupts _instead_of_ - * ATL done interrupts (the "instead of" might be important since it seems - * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget" - * to set the PTD's done bit in addition to not generating an interrupt!). - * - * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their - * done bit is not being set. This is bad - it blocks the endpoint until reboot. - * - * If we use SOF interrupts only, we get latency between ptd completion and the - * actual handling. This is very noticeable in testusb runs which takes several - * minutes longer without ATL interrupts. - * - * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it - * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the - * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered - * completed and its done map bit is set. - * - * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen - * not to cause too much lag when this HW bug occurs, while still hopefully - * ensuring that the check does not falsely trigger. - */ -#define SLOT_TIMEOUT 300 -#define SLOT_CHECK_PERIOD 200 -static struct timer_list errata2_timer; - -static void errata2_function(unsigned long data) -{ - struct usb_hcd *hcd = (struct usb_hcd *) data; - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int slot; - struct ptd ptd; - unsigned long spinflags; - - spin_lock_irqsave(&priv->lock, spinflags); - - for (slot = 0; slot < 32; slot++) - if (priv->atl_slots[slot].qh && time_after(jiffies, - priv->atl_slots[slot].timestamp + - SLOT_TIMEOUT * HZ / 1000)) { - ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); - if (!FROM_DW0_VALID(ptd.dw0) && - !FROM_DW3_ACTIVE(ptd.dw3)) - priv->atl_done_map |= 1 << slot; - } - - if (priv->atl_done_map) - handle_done_ptds(hcd); - - spin_unlock_irqrestore(&priv->lock, spinflags); - - errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; - add_timer(&errata2_timer); -} - -static int isp1760_run(struct usb_hcd *hcd) -{ - int retval; - u32 temp; - u32 command; - u32 chipid; - - hcd->uses_new_polling = 1; - - hcd->state = HC_STATE_RUNNING; - - /* Set PTD interrupt AND & OR maps */ - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); - /* step 23 passed */ - - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - - command = reg_read32(hcd->regs, HC_USBCMD); - command &= ~(CMD_LRESET|CMD_RESET); - command |= CMD_RUN; - reg_write32(hcd->regs, HC_USBCMD, command); - - retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); - if (retval) - return retval; - - /* - * XXX - * Spec says to write FLAG_CF as last config action, priv code grabs - * the semaphore while doing so. - */ - down_write(&ehci_cf_port_reset_rwsem); - reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - - retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); - up_write(&ehci_cf_port_reset_rwsem); - if (retval) - return retval; - - init_timer(&errata2_timer); - errata2_timer.function = errata2_function; - errata2_timer.data = (unsigned long) hcd; - errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; - add_timer(&errata2_timer); - - chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); - dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", - chipid & 0xffff, chipid >> 16); - - /* PTD Register Init Part 2, Step 28 */ - - /* Setup registers controlling PTD checking */ - reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, - ATL_BUF_FILL | INT_BUF_FILL); - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - return 0; -} - -static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) -{ - qtd->data_buffer = databuffer; - - if (len > MAX_PAYLOAD_SIZE) - len = MAX_PAYLOAD_SIZE; - qtd->length = len; - - return qtd->length; -} - -static void qtd_list_free(struct list_head *qtd_list) -{ - struct isp1760_qtd *qtd, *qtd_next; - - list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) { - list_del(&qtd->qtd_list); - qtd_free(qtd); - } -} - -/* - * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize. - * Also calculate the PID type (SETUP/IN/OUT) for each packet. - */ -#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) -static void packetize_urb(struct usb_hcd *hcd, - struct urb *urb, struct list_head *head, gfp_t flags) -{ - struct isp1760_qtd *qtd; - void *buf; - int len, maxpacketsize; - u8 packet_type; - - /* - * URBs map to sequences of QTDs: one logical transaction - */ - - if (!urb->transfer_buffer && urb->transfer_buffer_length) { - /* XXX This looks like usb storage / SCSI bug */ - dev_err(hcd->self.controller, - "buf is null, dma is %08lx len is %d\n", - (long unsigned)urb->transfer_dma, - urb->transfer_buffer_length); - WARN_ON(1); - } - - if (usb_pipein(urb->pipe)) - packet_type = IN_PID; - else - packet_type = OUT_PID; - - if (usb_pipecontrol(urb->pipe)) { - qtd = qtd_alloc(flags, urb, SETUP_PID); - if (!qtd) - goto cleanup; - qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest)); - list_add_tail(&qtd->qtd_list, head); - - /* for zero length DATA stages, STATUS is always IN */ - if (urb->transfer_buffer_length == 0) - packet_type = IN_PID; - } - - maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe))); - - /* - * buffer gets wrapped in one or more qtds; - * last one may be "short" (including zero len) - * and may serve as a control status ack - */ - buf = urb->transfer_buffer; - len = urb->transfer_buffer_length; - - for (;;) { - int this_qtd_len; - - qtd = qtd_alloc(flags, urb, packet_type); - if (!qtd) - goto cleanup; - this_qtd_len = qtd_fill(qtd, buf, len); - list_add_tail(&qtd->qtd_list, head); - - len -= this_qtd_len; - buf += this_qtd_len; - - if (len <= 0) - break; - } - - /* - * control requests may need a terminating data "status" ack; - * bulk ones may need a terminating short packet (zero length). - */ - if (urb->transfer_buffer_length != 0) { - int one_more = 0; - - if (usb_pipecontrol(urb->pipe)) { - one_more = 1; - if (packet_type == IN_PID) - packet_type = OUT_PID; - else - packet_type = IN_PID; - } else if (usb_pipebulk(urb->pipe) - && (urb->transfer_flags & URB_ZERO_PACKET) - && !(urb->transfer_buffer_length % - maxpacketsize)) { - one_more = 1; - } - if (one_more) { - qtd = qtd_alloc(flags, urb, packet_type); - if (!qtd) - goto cleanup; - - /* never any data in such packets */ - qtd_fill(qtd, NULL, 0); - list_add_tail(&qtd->qtd_list, head); - } - } - - return; - -cleanup: - qtd_list_free(head); -} - -static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, - gfp_t mem_flags) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - struct list_head *ep_queue; - struct isp1760_qh *qh, *qhit; - unsigned long spinflags; - LIST_HEAD(new_qtds); - int retval; - int qh_in_queue; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_CONTROL: - ep_queue = &priv->qh_list[QH_CONTROL]; - break; - case PIPE_BULK: - ep_queue = &priv->qh_list[QH_BULK]; - break; - case PIPE_INTERRUPT: - if (urb->interval < 0) - return -EINVAL; - /* FIXME: Check bandwidth */ - ep_queue = &priv->qh_list[QH_INTERRUPT]; - break; - case PIPE_ISOCHRONOUS: - dev_err(hcd->self.controller, "%s: isochronous USB packets " - "not yet supported\n", - __func__); - return -EPIPE; - default: - dev_err(hcd->self.controller, "%s: unknown pipe type\n", - __func__); - return -EPIPE; - } - - if (usb_pipein(urb->pipe)) - urb->actual_length = 0; - - packetize_urb(hcd, urb, &new_qtds, mem_flags); - if (list_empty(&new_qtds)) - return -ENOMEM; - - retval = 0; - spin_lock_irqsave(&priv->lock, spinflags); - - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { - retval = -ESHUTDOWN; - qtd_list_free(&new_qtds); - goto out; - } - retval = usb_hcd_link_urb_to_ep(hcd, urb); - if (retval) { - qtd_list_free(&new_qtds); - goto out; - } - - qh = urb->ep->hcpriv; - if (qh) { - qh_in_queue = 0; - list_for_each_entry(qhit, ep_queue, qh_list) { - if (qhit == qh) { - qh_in_queue = 1; - break; - } - } - if (!qh_in_queue) - list_add_tail(&qh->qh_list, ep_queue); - } else { - qh = qh_alloc(GFP_ATOMIC); - if (!qh) { - retval = -ENOMEM; - usb_hcd_unlink_urb_from_ep(hcd, urb); - qtd_list_free(&new_qtds); - goto out; - } - list_add_tail(&qh->qh_list, ep_queue); - urb->ep->hcpriv = qh; - } - - list_splice_tail(&new_qtds, &qh->qtd_list); - schedule_ptds(hcd); - -out: - spin_unlock_irqrestore(&priv->lock, spinflags); - return retval; -} - -static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, - struct isp1760_qh *qh) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int skip_map; - - WARN_ON(qh->slot == -1); - - /* We need to forcefully reclaim the slot since some transfers never - return, e.g. interrupt transfers and NAKed bulk transfers. */ - if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { - skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - skip_map |= (1 << qh->slot); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - priv->atl_slots[qh->slot].qh = NULL; - priv->atl_slots[qh->slot].qtd = NULL; - } else { - skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - skip_map |= (1 << qh->slot); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); - priv->int_slots[qh->slot].qh = NULL; - priv->int_slots[qh->slot].qtd = NULL; - } - - qh->slot = -1; -} - -/* - * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing - * any active transfer belonging to the urb in the process. - */ -static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, - struct isp1760_qtd *qtd) -{ - struct urb *urb; - int urb_was_running; - - urb = qtd->urb; - urb_was_running = 0; - list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) { - if (qtd->urb != urb) - break; - - if (qtd->status >= QTD_XFER_STARTED) - urb_was_running = 1; - if (last_qtd_of_urb(qtd, qh) && - (qtd->status >= QTD_XFER_COMPLETE)) - urb_was_running = 0; - - if (qtd->status == QTD_XFER_STARTED) - kill_transfer(hcd, urb, qh); - qtd->status = QTD_RETIRE; - } - - if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) { - qh->tt_buffer_dirty = 1; - if (usb_hub_clear_tt_buffer(urb)) - /* Clear failed; let's hope things work anyway */ - qh->tt_buffer_dirty = 0; - } -} - -static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, - int status) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - unsigned long spinflags; - struct isp1760_qh *qh; - struct isp1760_qtd *qtd; - int retval = 0; - - spin_lock_irqsave(&priv->lock, spinflags); - retval = usb_hcd_check_unlink_urb(hcd, urb, status); - if (retval) - goto out; - - qh = urb->ep->hcpriv; - if (!qh) { - retval = -EINVAL; - goto out; - } - - list_for_each_entry(qtd, &qh->qtd_list, qtd_list) - if (qtd->urb == urb) { - dequeue_urb_from_qtd(hcd, qh, qtd); - list_move(&qtd->qtd_list, &qh->qtd_list); - break; - } - - urb->status = status; - schedule_ptds(hcd); - -out: - spin_unlock_irqrestore(&priv->lock, spinflags); - return retval; -} - -static void isp1760_endpoint_disable(struct usb_hcd *hcd, - struct usb_host_endpoint *ep) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - unsigned long spinflags; - struct isp1760_qh *qh, *qh_iter; - int i; - - spin_lock_irqsave(&priv->lock, spinflags); - - qh = ep->hcpriv; - if (!qh) - goto out; - - WARN_ON(!list_empty(&qh->qtd_list)); - - for (i = 0; i < QH_END; i++) - list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list) - if (qh_iter == qh) { - list_del(&qh_iter->qh_list); - i = QH_END; - break; - } - qh_free(qh); - ep->hcpriv = NULL; - - schedule_ptds(hcd); - -out: - spin_unlock_irqrestore(&priv->lock, spinflags); -} - -static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 temp, status = 0; - u32 mask; - int retval = 1; - unsigned long flags; - - /* if !PM, root hub timers won't get shut down ... */ - if (!HC_IS_RUNNING(hcd->state)) - return 0; - - /* init status to no-changes */ - buf[0] = 0; - mask = PORT_CSC; - - spin_lock_irqsave(&priv->lock, flags); - temp = reg_read32(hcd->regs, HC_PORTSC1); - - if (temp & PORT_OWNER) { - if (temp & PORT_CSC) { - temp &= ~PORT_CSC; - reg_write32(hcd->regs, HC_PORTSC1, temp); - goto done; - } - } - - /* - * Return status information even for ports with OWNER set. - * Otherwise hub_wq wouldn't see the disconnect event when a - * high-speed device is switched over to the companion - * controller by the user. - */ - - if ((temp & mask) != 0 - || ((temp & PORT_RESUME) != 0 - && time_after_eq(jiffies, - priv->reset_done))) { - buf [0] |= 1 << (0 + 1); - status = STS_PCD; - } - /* FIXME autosuspend idle root hubs */ -done: - spin_unlock_irqrestore(&priv->lock, flags); - return status ? retval : 0; -} - -static void isp1760_hub_descriptor(struct isp1760_hcd *priv, - struct usb_hub_descriptor *desc) -{ - int ports = HCS_N_PORTS(priv->hcs_params); - u16 temp; - - desc->bDescriptorType = 0x29; - /* priv 1.0, 2.3.9 says 20ms max */ - desc->bPwrOn2PwrGood = 10; - desc->bHubContrCurrent = 0; - - desc->bNbrPorts = ports; - temp = 1 + (ports / 8); - desc->bDescLength = 7 + 2 * temp; - - /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&desc->u.hs.DeviceRemovable[0], 0, temp); - memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); - - /* per-port overcurrent reporting */ - temp = 0x0008; - if (HCS_PPC(priv->hcs_params)) - /* per-port power control */ - temp |= 0x0001; - else - /* no power switching */ - temp |= 0x0002; - desc->wHubCharacteristics = cpu_to_le16(temp); -} - -#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) - -static int check_reset_complete(struct usb_hcd *hcd, int index, - int port_status) -{ - if (!(port_status & PORT_CONNECT)) - return port_status; - - /* if reset finished and it's still not enabled -- handoff */ - if (!(port_status & PORT_PE)) { - - dev_info(hcd->self.controller, - "port %d full speed --> companion\n", - index + 1); - - port_status |= PORT_OWNER; - port_status &= ~PORT_RWC_BITS; - reg_write32(hcd->regs, HC_PORTSC1, port_status); - - } else - dev_info(hcd->self.controller, "port %d high speed\n", - index + 1); - - return port_status; -} - -static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, - u16 wValue, u16 wIndex, char *buf, u16 wLength) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - int ports = HCS_N_PORTS(priv->hcs_params); - u32 temp, status; - unsigned long flags; - int retval = 0; - unsigned selector; - - /* - * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. - * HCS_INDICATOR may say we can change LEDs to off/amber/green. - * (track current state ourselves) ... blink for diagnostics, - * power, "this is the one", etc. EHCI spec supports this. - */ - - spin_lock_irqsave(&priv->lock, flags); - switch (typeReq) { - case ClearHubFeature: - switch (wValue) { - case C_HUB_LOCAL_POWER: - case C_HUB_OVER_CURRENT: - /* no hub-wide feature/status flags */ - break; - default: - goto error; - } - break; - case ClearPortFeature: - if (!wIndex || wIndex > ports) - goto error; - wIndex--; - temp = reg_read32(hcd->regs, HC_PORTSC1); - - /* - * Even if OWNER is set, so the port is owned by the - * companion controller, hub_wq needs to be able to clear - * the port-change status bits (especially - * USB_PORT_STAT_C_CONNECTION). - */ - - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE); - break; - case USB_PORT_FEAT_C_ENABLE: - /* XXX error? */ - break; - case USB_PORT_FEAT_SUSPEND: - if (temp & PORT_RESET) - goto error; - - if (temp & PORT_SUSPEND) { - if ((temp & PORT_PE) == 0) - goto error; - /* resume signaling for 20 msec */ - temp &= ~(PORT_RWC_BITS); - reg_write32(hcd->regs, HC_PORTSC1, - temp | PORT_RESUME); - priv->reset_done = jiffies + - msecs_to_jiffies(20); - } - break; - case USB_PORT_FEAT_C_SUSPEND: - /* we auto-clear this feature */ - break; - case USB_PORT_FEAT_POWER: - if (HCS_PPC(priv->hcs_params)) - reg_write32(hcd->regs, HC_PORTSC1, - temp & ~PORT_POWER); - break; - case USB_PORT_FEAT_C_CONNECTION: - reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC); - break; - case USB_PORT_FEAT_C_OVER_CURRENT: - /* XXX error ?*/ - break; - case USB_PORT_FEAT_C_RESET: - /* GetPortStatus clears reset */ - break; - default: - goto error; - } - reg_read32(hcd->regs, HC_USBCMD); - break; - case GetHubDescriptor: - isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *) - buf); - break; - case GetHubStatus: - /* no hub-wide feature/status flags */ - memset(buf, 0, 4); - break; - case GetPortStatus: - if (!wIndex || wIndex > ports) - goto error; - wIndex--; - status = 0; - temp = reg_read32(hcd->regs, HC_PORTSC1); - - /* wPortChange bits */ - if (temp & PORT_CSC) - status |= USB_PORT_STAT_C_CONNECTION << 16; - - - /* whoever resumes must GetPortStatus to complete it!! */ - if (temp & PORT_RESUME) { - dev_err(hcd->self.controller, "Port resume should be skipped.\n"); - - /* Remote Wakeup received? */ - if (!priv->reset_done) { - /* resume signaling for 20 msec */ - priv->reset_done = jiffies - + msecs_to_jiffies(20); - /* check the port again */ - mod_timer(&hcd->rh_timer, priv->reset_done); - } - - /* resume completed? */ - else if (time_after_eq(jiffies, - priv->reset_done)) { - status |= USB_PORT_STAT_C_SUSPEND << 16; - priv->reset_done = 0; - - /* stop resume signaling */ - temp = reg_read32(hcd->regs, HC_PORTSC1); - reg_write32(hcd->regs, HC_PORTSC1, - temp & ~(PORT_RWC_BITS | PORT_RESUME)); - retval = handshake(hcd, HC_PORTSC1, - PORT_RESUME, 0, 2000 /* 2msec */); - if (retval != 0) { - dev_err(hcd->self.controller, - "port %d resume error %d\n", - wIndex + 1, retval); - goto error; - } - temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10)); - } - } - - /* whoever resets must GetPortStatus to complete it!! */ - if ((temp & PORT_RESET) - && time_after_eq(jiffies, - priv->reset_done)) { - status |= USB_PORT_STAT_C_RESET << 16; - priv->reset_done = 0; - - /* force reset to complete */ - reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET); - /* REVISIT: some hardware needs 550+ usec to clear - * this bit; seems too long to spin routinely... - */ - retval = handshake(hcd, HC_PORTSC1, - PORT_RESET, 0, 750); - if (retval != 0) { - dev_err(hcd->self.controller, "port %d reset error %d\n", - wIndex + 1, retval); - goto error; - } - - /* see what we found out */ - temp = check_reset_complete(hcd, wIndex, - reg_read32(hcd->regs, HC_PORTSC1)); - } - /* - * Even if OWNER is set, there's no harm letting hub_wq - * see the wPortStatus values (they should all be 0 except - * for PORT_POWER anyway). - */ - - if (temp & PORT_OWNER) - dev_err(hcd->self.controller, "PORT_OWNER is set\n"); - - if (temp & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - /* status may be from integrated TT */ - status |= USB_PORT_STAT_HIGH_SPEED; - } - if (temp & PORT_PE) - status |= USB_PORT_STAT_ENABLE; - if (temp & (PORT_SUSPEND|PORT_RESUME)) - status |= USB_PORT_STAT_SUSPEND; - if (temp & PORT_RESET) - status |= USB_PORT_STAT_RESET; - if (temp & PORT_POWER) - status |= USB_PORT_STAT_POWER; - - put_unaligned(cpu_to_le32(status), (__le32 *) buf); - break; - case SetHubFeature: - switch (wValue) { - case C_HUB_LOCAL_POWER: - case C_HUB_OVER_CURRENT: - /* no hub-wide feature/status flags */ - break; - default: - goto error; - } - break; - case SetPortFeature: - selector = wIndex >> 8; - wIndex &= 0xff; - if (!wIndex || wIndex > ports) - goto error; - wIndex--; - temp = reg_read32(hcd->regs, HC_PORTSC1); - if (temp & PORT_OWNER) - break; - -/* temp &= ~PORT_RWC_BITS; */ - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE); - break; - - case USB_PORT_FEAT_SUSPEND: - if ((temp & PORT_PE) == 0 - || (temp & PORT_RESET) != 0) - goto error; - - reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND); - break; - case USB_PORT_FEAT_POWER: - if (HCS_PPC(priv->hcs_params)) - reg_write32(hcd->regs, HC_PORTSC1, - temp | PORT_POWER); - break; - case USB_PORT_FEAT_RESET: - if (temp & PORT_RESUME) - goto error; - /* line status bits may report this as low speed, - * which can be fine if this root hub has a - * transaction translator built in. - */ - if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT - && PORT_USB11(temp)) { - temp |= PORT_OWNER; - } else { - temp |= PORT_RESET; - temp &= ~PORT_PE; - - /* - * caller must wait, then call GetPortStatus - * usb 2.0 spec says 50 ms resets on root - */ - priv->reset_done = jiffies + - msecs_to_jiffies(50); - } - reg_write32(hcd->regs, HC_PORTSC1, temp); - break; - default: - goto error; - } - reg_read32(hcd->regs, HC_USBCMD); - break; - - default: -error: - /* "stall" on error */ - retval = -EPIPE; - } - spin_unlock_irqrestore(&priv->lock, flags); - return retval; -} - -static int isp1760_get_frame(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 fr; - - fr = reg_read32(hcd->regs, HC_FRINDEX); - return (fr >> 3) % priv->periodic_size; -} - -static void isp1760_stop(struct usb_hcd *hcd) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 temp; - - del_timer(&errata2_timer); - - isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, - NULL, 0); - mdelay(20); - - spin_lock_irq(&priv->lock); - ehci_reset(hcd); - /* Disable IRQ */ - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); - spin_unlock_irq(&priv->lock); - - reg_write32(hcd->regs, HC_CONFIGFLAG, 0); -} - -static void isp1760_shutdown(struct usb_hcd *hcd) -{ - u32 command, temp; - - isp1760_stop(hcd); - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); - - command = reg_read32(hcd->regs, HC_USBCMD); - command &= ~CMD_RUN; - reg_write32(hcd->regs, HC_USBCMD, command); -} - -static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd, - struct usb_host_endpoint *ep) -{ - struct isp1760_hcd *priv = hcd_to_priv(hcd); - struct isp1760_qh *qh = ep->hcpriv; - unsigned long spinflags; - - if (!qh) - return; - - spin_lock_irqsave(&priv->lock, spinflags); - qh->tt_buffer_dirty = 0; - schedule_ptds(hcd); - spin_unlock_irqrestore(&priv->lock, spinflags); -} - - -static const struct hc_driver isp1760_hc_driver = { - .description = "isp1760-hcd", - .product_desc = "NXP ISP1760 USB Host Controller", - .hcd_priv_size = sizeof(struct isp1760_hcd), - .irq = isp1760_irq, - .flags = HCD_MEMORY | HCD_USB2, - .reset = isp1760_hc_setup, - .start = isp1760_run, - .stop = isp1760_stop, - .shutdown = isp1760_shutdown, - .urb_enqueue = isp1760_urb_enqueue, - .urb_dequeue = isp1760_urb_dequeue, - .endpoint_disable = isp1760_endpoint_disable, - .get_frame_number = isp1760_get_frame, - .hub_status_data = isp1760_hub_status_data, - .hub_control = isp1760_hub_control, - .clear_tt_buffer_complete = isp1760_clear_tt_buffer_complete, -}; - -int __init init_kmem_once(void) -{ - urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem", - sizeof(struct urb_listitem), 0, SLAB_TEMPORARY | - SLAB_MEM_SPREAD, NULL); - - if (!urb_listitem_cachep) - return -ENOMEM; - - qtd_cachep = kmem_cache_create("isp1760_qtd", - sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY | - SLAB_MEM_SPREAD, NULL); - - if (!qtd_cachep) - return -ENOMEM; - - qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh), - 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); - - if (!qh_cachep) { - kmem_cache_destroy(qtd_cachep); - return -ENOMEM; - } - - return 0; -} - -void deinit_kmem_cache(void) -{ - kmem_cache_destroy(qtd_cachep); - kmem_cache_destroy(qh_cachep); - kmem_cache_destroy(urb_listitem_cachep); -} - -struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, - int irq, unsigned long irqflags, - int rst_gpio, - struct device *dev, const char *busname, - unsigned int devflags) -{ - struct usb_hcd *hcd; - struct isp1760_hcd *priv; - int ret; - - if (usb_disabled()) - return ERR_PTR(-ENODEV); - - /* prevent usb-core allocating DMA pages */ - dev->dma_mask = NULL; - - hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev)); - if (!hcd) - return ERR_PTR(-ENOMEM); - - priv = hcd_to_priv(hcd); - priv->devflags = devflags; - priv->rst_gpio = rst_gpio; - init_memory(priv); - hcd->regs = ioremap(res_start, res_len); - if (!hcd->regs) { - ret = -EIO; - goto err_put; - } - - hcd->irq = irq; - hcd->rsrc_start = res_start; - hcd->rsrc_len = res_len; - - ret = usb_add_hcd(hcd, irq, irqflags); - if (ret) - goto err_unmap; - device_wakeup_enable(hcd->self.controller); - - return hcd; - -err_unmap: - iounmap(hcd->regs); - -err_put: - usb_put_hcd(hcd); - - return ERR_PTR(ret); -} - -MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP"); -MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h deleted file mode 100644 index 33dc79ccaa6b..000000000000 --- a/drivers/usb/host/isp1760-hcd.h +++ /dev/null @@ -1,208 +0,0 @@ -#ifndef _ISP1760_HCD_H_ -#define _ISP1760_HCD_H_ - -/* exports for if */ -struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, - int irq, unsigned long irqflags, - int rst_gpio, - struct device *dev, const char *busname, - unsigned int devflags); -int init_kmem_once(void); -void deinit_kmem_cache(void); - -/* EHCI capability registers */ -#define HC_CAPLENGTH 0x00 -#define HC_HCSPARAMS 0x04 -#define HC_HCCPARAMS 0x08 - -/* EHCI operational registers */ -#define HC_USBCMD 0x20 -#define HC_USBSTS 0x24 -#define HC_FRINDEX 0x2c -#define HC_CONFIGFLAG 0x60 -#define HC_PORTSC1 0x64 -#define HC_ISO_PTD_DONEMAP_REG 0x130 -#define HC_ISO_PTD_SKIPMAP_REG 0x134 -#define HC_ISO_PTD_LASTPTD_REG 0x138 -#define HC_INT_PTD_DONEMAP_REG 0x140 -#define HC_INT_PTD_SKIPMAP_REG 0x144 -#define HC_INT_PTD_LASTPTD_REG 0x148 -#define HC_ATL_PTD_DONEMAP_REG 0x150 -#define HC_ATL_PTD_SKIPMAP_REG 0x154 -#define HC_ATL_PTD_LASTPTD_REG 0x158 - -/* Configuration Register */ -#define HC_HW_MODE_CTRL 0x300 -#define ALL_ATX_RESET (1 << 31) -#define HW_ANA_DIGI_OC (1 << 15) -#define HW_DATA_BUS_32BIT (1 << 8) -#define HW_DACK_POL_HIGH (1 << 6) -#define HW_DREQ_POL_HIGH (1 << 5) -#define HW_INTR_HIGH_ACT (1 << 2) -#define HW_INTR_EDGE_TRIG (1 << 1) -#define HW_GLOBAL_INTR_EN (1 << 0) - -#define HC_CHIP_ID_REG 0x304 -#define HC_SCRATCH_REG 0x308 - -#define HC_RESET_REG 0x30c -#define SW_RESET_RESET_HC (1 << 1) -#define SW_RESET_RESET_ALL (1 << 0) - -#define HC_BUFFER_STATUS_REG 0x334 -#define ISO_BUF_FILL (1 << 2) -#define INT_BUF_FILL (1 << 1) -#define ATL_BUF_FILL (1 << 0) - -#define HC_MEMORY_REG 0x33c -#define ISP_BANK(x) ((x) << 16) - -#define HC_PORT1_CTRL 0x374 -#define PORT1_POWER (3 << 3) -#define PORT1_INIT1 (1 << 7) -#define PORT1_INIT2 (1 << 23) -#define HW_OTG_CTRL_SET 0x374 -#define HW_OTG_CTRL_CLR 0x376 - -/* Interrupt Register */ -#define HC_INTERRUPT_REG 0x310 - -#define HC_INTERRUPT_ENABLE 0x314 -#define HC_ISO_INT (1 << 9) -#define HC_ATL_INT (1 << 8) -#define HC_INTL_INT (1 << 7) -#define HC_EOT_INT (1 << 3) -#define HC_SOT_INT (1 << 1) -#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT) - -#define HC_ISO_IRQ_MASK_OR_REG 0x318 -#define HC_INT_IRQ_MASK_OR_REG 0x31C -#define HC_ATL_IRQ_MASK_OR_REG 0x320 -#define HC_ISO_IRQ_MASK_AND_REG 0x324 -#define HC_INT_IRQ_MASK_AND_REG 0x328 -#define HC_ATL_IRQ_MASK_AND_REG 0x32C - -/* urb state*/ -#define DELETE_URB (0x0008) -#define NO_TRANSFER_ACTIVE (0xffffffff) - -/* Philips Proprietary Transfer Descriptor (PTD) */ -typedef __u32 __bitwise __dw; -struct ptd { - __dw dw0; - __dw dw1; - __dw dw2; - __dw dw3; - __dw dw4; - __dw dw5; - __dw dw6; - __dw dw7; -}; -#define PTD_OFFSET 0x0400 -#define ISO_PTD_OFFSET 0x0400 -#define INT_PTD_OFFSET 0x0800 -#define ATL_PTD_OFFSET 0x0c00 -#define PAYLOAD_OFFSET 0x1000 - -struct slotinfo { - struct isp1760_qh *qh; - struct isp1760_qtd *qtd; - unsigned long timestamp; -}; - - -typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, - struct isp1760_qtd *qtd); - -/* - * Device flags that can vary from board to board. All of these - * indicate the most "atypical" case, so that a devflags of 0 is - * a sane default configuration. - */ -#define ISP1760_FLAG_BUS_WIDTH_16 0x00000002 /* 16-bit data bus width */ -#define ISP1760_FLAG_OTG_EN 0x00000004 /* Port 1 supports OTG */ -#define ISP1760_FLAG_ANALOG_OC 0x00000008 /* Analog overcurrent */ -#define ISP1760_FLAG_DACK_POL_HIGH 0x00000010 /* DACK active high */ -#define ISP1760_FLAG_DREQ_POL_HIGH 0x00000020 /* DREQ active high */ -#define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */ -#define ISP1760_FLAG_INTR_POL_HIGH 0x00000080 /* Interrupt polarity active high */ -#define ISP1760_FLAG_INTR_EDGE_TRIG 0x00000100 /* Interrupt edge triggered */ -#define ISP1760_FLAG_RESET_ACTIVE_HIGH 0x80000000 /* RESET GPIO active high */ - -/* chip memory management */ -struct memory_chunk { - unsigned int start; - unsigned int size; - unsigned int free; -}; - -/* - * 60kb divided in: - * - 32 blocks @ 256 bytes - * - 20 blocks @ 1024 bytes - * - 4 blocks @ 8192 bytes - */ - -#define BLOCK_1_NUM 32 -#define BLOCK_2_NUM 20 -#define BLOCK_3_NUM 4 - -#define BLOCK_1_SIZE 256 -#define BLOCK_2_SIZE 1024 -#define BLOCK_3_SIZE 8192 -#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM) -#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE -#define PAYLOAD_AREA_SIZE 0xf000 - -/* ATL */ -/* DW0 */ -#define DW0_VALID_BIT 1 -#define FROM_DW0_VALID(x) ((x) & 0x01) -#define TO_DW0_LENGTH(x) (((u32) x) << 3) -#define TO_DW0_MAXPACKET(x) (((u32) x) << 18) -#define TO_DW0_MULTI(x) (((u32) x) << 29) -#define TO_DW0_ENDPOINT(x) (((u32) x) << 31) -/* DW1 */ -#define TO_DW1_DEVICE_ADDR(x) (((u32) x) << 3) -#define TO_DW1_PID_TOKEN(x) (((u32) x) << 10) -#define DW1_TRANS_BULK ((u32) 2 << 12) -#define DW1_TRANS_INT ((u32) 3 << 12) -#define DW1_TRANS_SPLIT ((u32) 1 << 14) -#define DW1_SE_USB_LOSPEED ((u32) 2 << 16) -#define TO_DW1_PORT_NUM(x) (((u32) x) << 18) -#define TO_DW1_HUB_NUM(x) (((u32) x) << 25) -/* DW2 */ -#define TO_DW2_DATA_START_ADDR(x) (((u32) x) << 8) -#define TO_DW2_RL(x) ((x) << 25) -#define FROM_DW2_RL(x) (((x) >> 25) & 0xf) -/* DW3 */ -#define FROM_DW3_NRBYTESTRANSFERRED(x) ((x) & 0x7fff) -#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x) ((x) & 0x07ff) -#define TO_DW3_NAKCOUNT(x) ((x) << 19) -#define FROM_DW3_NAKCOUNT(x) (((x) >> 19) & 0xf) -#define TO_DW3_CERR(x) ((x) << 23) -#define FROM_DW3_CERR(x) (((x) >> 23) & 0x3) -#define TO_DW3_DATA_TOGGLE(x) ((x) << 25) -#define FROM_DW3_DATA_TOGGLE(x) (((x) >> 25) & 0x1) -#define TO_DW3_PING(x) ((x) << 26) -#define FROM_DW3_PING(x) (((x) >> 26) & 0x1) -#define DW3_ERROR_BIT (1 << 28) -#define DW3_BABBLE_BIT (1 << 29) -#define DW3_HALT_BIT (1 << 30) -#define DW3_ACTIVE_BIT (1 << 31) -#define FROM_DW3_ACTIVE(x) (((x) >> 31) & 0x01) - -#define INT_UNDERRUN (1 << 2) -#define INT_BABBLE (1 << 1) -#define INT_EXACT (1 << 0) - -#define SETUP_PID (2) -#define IN_PID (1) -#define OUT_PID (0) - -/* Errata 1 */ -#define RL_COUNTER (0) -#define NAK_COUNTER (0) -#define ERR_COUNTER (2) - -#endif /* _ISP1760_HCD_H_ */ diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c deleted file mode 100644 index 09254a43bc01..000000000000 --- a/drivers/usb/host/isp1760-if.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Glue code for the ISP1760 driver and bus - * Currently there is support for - * - OpenFirmware - * - PCI - * - PDEV (generic platform device centralized driver model) - * - * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> - * - */ - -#include <linux/usb.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/usb/isp1760.h> -#include <linux/usb/hcd.h> - -#include "isp1760-hcd.h" - -#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> -#endif - -#ifdef CONFIG_PCI -#include <linux/pci.h> -#endif - -#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) -struct isp1760 { - struct usb_hcd *hcd; - int rst_gpio; -}; - -static int of_isp1760_probe(struct platform_device *dev) -{ - struct isp1760 *drvdata; - struct device_node *dp = dev->dev.of_node; - struct resource *res; - struct resource memory; - int virq; - resource_size_t res_len; - int ret; - unsigned int devflags = 0; - enum of_gpio_flags gpio_flags; - u32 bus_width = 0; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (!drvdata) - return -ENOMEM; - - ret = of_address_to_resource(dp, 0, &memory); - if (ret) { - ret = -ENXIO; - goto free_data; - } - - res_len = resource_size(&memory); - - res = request_mem_region(memory.start, res_len, dev_name(&dev->dev)); - if (!res) { - ret = -EBUSY; - goto free_data; - } - - virq = irq_of_parse_and_map(dp, 0); - if (!virq) { - ret = -ENODEV; - goto release_reg; - } - - if (of_device_is_compatible(dp, "nxp,usb-isp1761")) - devflags |= ISP1760_FLAG_ISP1761; - - /* Some systems wire up only 16 of the 32 data lines */ - of_property_read_u32(dp, "bus-width", &bus_width); - if (bus_width == 16) - devflags |= ISP1760_FLAG_BUS_WIDTH_16; - - if (of_get_property(dp, "port1-otg", NULL) != NULL) - devflags |= ISP1760_FLAG_OTG_EN; - - if (of_get_property(dp, "analog-oc", NULL) != NULL) - devflags |= ISP1760_FLAG_ANALOG_OC; - - if (of_get_property(dp, "dack-polarity", NULL) != NULL) - devflags |= ISP1760_FLAG_DACK_POL_HIGH; - - if (of_get_property(dp, "dreq-polarity", NULL) != NULL) - devflags |= ISP1760_FLAG_DREQ_POL_HIGH; - - drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags); - if (gpio_is_valid(drvdata->rst_gpio)) { - ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev)); - if (!ret) { - if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) { - devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH; - gpio_direction_output(drvdata->rst_gpio, 0); - } else { - gpio_direction_output(drvdata->rst_gpio, 1); - } - } else { - drvdata->rst_gpio = ret; - } - } - - drvdata->hcd = isp1760_register(memory.start, res_len, virq, - IRQF_SHARED, drvdata->rst_gpio, - &dev->dev, dev_name(&dev->dev), - devflags); - if (IS_ERR(drvdata->hcd)) { - ret = PTR_ERR(drvdata->hcd); - goto free_gpio; - } - - platform_set_drvdata(dev, drvdata); - return ret; - -free_gpio: - if (gpio_is_valid(drvdata->rst_gpio)) - gpio_free(drvdata->rst_gpio); -release_reg: - release_mem_region(memory.start, res_len); -free_data: - kfree(drvdata); - return ret; -} - -static int of_isp1760_remove(struct platform_device *dev) -{ - struct isp1760 *drvdata = platform_get_drvdata(dev); - - usb_remove_hcd(drvdata->hcd); - iounmap(drvdata->hcd->regs); - release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len); - usb_put_hcd(drvdata->hcd); - - if (gpio_is_valid(drvdata->rst_gpio)) - gpio_free(drvdata->rst_gpio); - - kfree(drvdata); - return 0; -} - -static const struct of_device_id of_isp1760_match[] = { - { - .compatible = "nxp,usb-isp1760", - }, - { - .compatible = "nxp,usb-isp1761", - }, - { }, -}; -MODULE_DEVICE_TABLE(of, of_isp1760_match); - -static struct platform_driver isp1760_of_driver = { - .driver = { - .name = "nxp-isp1760", - .of_match_table = of_isp1760_match, - }, - .probe = of_isp1760_probe, - .remove = of_isp1760_remove, -}; -#endif - -#ifdef CONFIG_PCI -static int isp1761_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - u8 latency, limit; - __u32 reg_data; - int retry_count; - struct usb_hcd *hcd; - unsigned int devflags = 0; - int ret_status = 0; - - resource_size_t pci_mem_phy0; - resource_size_t memlength; - - u8 __iomem *chip_addr; - u8 __iomem *iobase; - resource_size_t nxp_pci_io_base; - resource_size_t iolength; - - if (usb_disabled()) - return -ENODEV; - - if (pci_enable_device(dev) < 0) - return -ENODEV; - - if (!dev->irq) - return -ENODEV; - - /* Grab the PLX PCI mem maped port start address we need */ - nxp_pci_io_base = pci_resource_start(dev, 0); - iolength = pci_resource_len(dev, 0); - - if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) { - printk(KERN_ERR "request region #1\n"); - return -EBUSY; - } - - iobase = ioremap_nocache(nxp_pci_io_base, iolength); - if (!iobase) { - printk(KERN_ERR "ioremap #1\n"); - ret_status = -ENOMEM; - goto cleanup1; - } - /* Grab the PLX PCI shared memory of the ISP 1761 we need */ - pci_mem_phy0 = pci_resource_start(dev, 3); - memlength = pci_resource_len(dev, 3); - if (memlength < 0xffff) { - printk(KERN_ERR "memory length for this resource is wrong\n"); - ret_status = -ENOMEM; - goto cleanup2; - } - - if (!request_mem_region(pci_mem_phy0, memlength, "ISP-PCI")) { - printk(KERN_ERR "host controller already in use\n"); - ret_status = -EBUSY; - goto cleanup2; - } - - /* map available memory */ - chip_addr = ioremap_nocache(pci_mem_phy0,memlength); - if (!chip_addr) { - printk(KERN_ERR "Error ioremap failed\n"); - ret_status = -ENOMEM; - goto cleanup3; - } - - /* bad pci latencies can contribute to overruns */ - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency); - if (latency) { - pci_read_config_byte(dev, PCI_MAX_LAT, &limit); - if (limit && limit < latency) - pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit); - } - - /* Try to check whether we can access Scratch Register of - * Host Controller or not. The initial PCI access is retried until - * local init for the PCI bridge is completed - */ - retry_count = 20; - reg_data = 0; - while ((reg_data != 0xFACE) && retry_count) { - /*by default host is in 16bit mode, so - * io operations at this stage must be 16 bit - * */ - writel(0xface, chip_addr + HC_SCRATCH_REG); - udelay(100); - reg_data = readl(chip_addr + HC_SCRATCH_REG) & 0x0000ffff; - retry_count--; - } - - iounmap(chip_addr); - - /* Host Controller presence is detected by writing to scratch register - * and reading back and checking the contents are same or not - */ - if (reg_data != 0xFACE) { - dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data); - ret_status = -ENOMEM; - goto cleanup3; - } - - pci_set_master(dev); - - /* configure PLX PCI chip to pass interrupts */ -#define PLX_INT_CSR_REG 0x68 - reg_data = readl(iobase + PLX_INT_CSR_REG); - reg_data |= 0x900; - writel(reg_data, iobase + PLX_INT_CSR_REG); - - dev->dev.dma_mask = NULL; - hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq, - IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev), - devflags); - if (IS_ERR(hcd)) { - ret_status = -ENODEV; - goto cleanup3; - } - - /* done with PLX IO access */ - iounmap(iobase); - release_mem_region(nxp_pci_io_base, iolength); - - pci_set_drvdata(dev, hcd); - return 0; - -cleanup3: - release_mem_region(pci_mem_phy0, memlength); -cleanup2: - iounmap(iobase); -cleanup1: - release_mem_region(nxp_pci_io_base, iolength); - return ret_status; -} - -static void isp1761_pci_remove(struct pci_dev *dev) -{ - struct usb_hcd *hcd; - - hcd = pci_get_drvdata(dev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - - pci_disable_device(dev); -} - -static void isp1761_pci_shutdown(struct pci_dev *dev) -{ - printk(KERN_ERR "ips1761_pci_shutdown\n"); -} - -static const struct pci_device_id isp1760_plx [] = { - { - .class = PCI_CLASS_BRIDGE_OTHER << 8, - .class_mask = ~0, - .vendor = PCI_VENDOR_ID_PLX, - .device = 0x5406, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = 0x9054, - }, - { } -}; -MODULE_DEVICE_TABLE(pci, isp1760_plx); - -static struct pci_driver isp1761_pci_driver = { - .name = "isp1760", - .id_table = isp1760_plx, - .probe = isp1761_pci_probe, - .remove = isp1761_pci_remove, - .shutdown = isp1761_pci_shutdown, -}; -#endif - -static int isp1760_plat_probe(struct platform_device *pdev) -{ - int ret = 0; - struct usb_hcd *hcd; - struct resource *mem_res; - struct resource *irq_res; - resource_size_t mem_size; - struct isp1760_platform_data *priv = dev_get_platdata(&pdev->dev); - unsigned int devflags = 0; - unsigned long irqflags = IRQF_SHARED; - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - pr_warning("isp1760: Memory resource not available\n"); - ret = -ENODEV; - goto out; - } - mem_size = resource_size(mem_res); - if (!request_mem_region(mem_res->start, mem_size, "isp1760")) { - pr_warning("isp1760: Cannot reserve the memory resource\n"); - ret = -EBUSY; - goto out; - } - - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { - pr_warning("isp1760: IRQ resource not available\n"); - ret = -ENODEV; - goto cleanup; - } - - irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; - - if (priv) { - if (priv->is_isp1761) - devflags |= ISP1760_FLAG_ISP1761; - if (priv->bus_width_16) - devflags |= ISP1760_FLAG_BUS_WIDTH_16; - if (priv->port1_otg) - devflags |= ISP1760_FLAG_OTG_EN; - if (priv->analog_oc) - devflags |= ISP1760_FLAG_ANALOG_OC; - if (priv->dack_polarity_high) - devflags |= ISP1760_FLAG_DACK_POL_HIGH; - if (priv->dreq_polarity_high) - devflags |= ISP1760_FLAG_DREQ_POL_HIGH; - } - - hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, - irqflags, -ENOENT, - &pdev->dev, dev_name(&pdev->dev), devflags); - - platform_set_drvdata(pdev, hcd); - - if (IS_ERR(hcd)) { - pr_warning("isp1760: Failed to register the HCD device\n"); - ret = -ENODEV; - goto cleanup; - } - - pr_info("ISP1760 USB device initialised\n"); - return ret; - -cleanup: - release_mem_region(mem_res->start, mem_size); -out: - return ret; -} - -static int isp1760_plat_remove(struct platform_device *pdev) -{ - struct resource *mem_res; - resource_size_t mem_size; - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mem_size = resource_size(mem_res); - release_mem_region(mem_res->start, mem_size); - - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver isp1760_plat_driver = { - .probe = isp1760_plat_probe, - .remove = isp1760_plat_remove, - .driver = { - .name = "isp1760", - }, -}; - -static int __init isp1760_init(void) -{ - int ret, any_ret = -ENODEV; - - init_kmem_once(); - - ret = platform_driver_register(&isp1760_plat_driver); - if (!ret) - any_ret = 0; -#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) - ret = platform_driver_register(&isp1760_of_driver); - if (!ret) - any_ret = 0; -#endif -#ifdef CONFIG_PCI - ret = pci_register_driver(&isp1761_pci_driver); - if (!ret) - any_ret = 0; -#endif - - if (any_ret) - deinit_kmem_cache(); - return any_ret; -} -module_init(isp1760_init); - -static void __exit isp1760_exit(void) -{ - platform_driver_unregister(&isp1760_plat_driver); -#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) - platform_driver_unregister(&isp1760_of_driver); -#endif -#ifdef CONFIG_PCI - pci_unregister_driver(&isp1761_pci_driver); -#endif - deinit_kmem_cache(); -} -module_exit(isp1760_exit); diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index 6234c75da33f..a98833cbfcf3 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -55,6 +55,7 @@ * single thread (max3421_spi_thread). */ +#include <linux/jiffies.h> #include <linux/module.h> #include <linux/spi/spi.h> #include <linux/usb.h> @@ -1291,7 +1292,7 @@ max3421_handle_irqs(struct usb_hcd *hcd) char sbuf[16 * 16], *dp, *end; int i; - if (jiffies - last_time > 5*HZ) { + if (time_after(jiffies, last_time + 5*HZ)) { dp = sbuf; end = sbuf + sizeof(sbuf); *dp = '\0'; @@ -1660,7 +1661,8 @@ hub_descriptor(struct usb_hub_descriptor *desc) */ desc->bDescriptorType = 0x29; /* hub descriptor */ desc->bDescLength = 9; - desc->wHubCharacteristics = cpu_to_le16(0x0001); + desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | + HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = 1; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index dc9e4e61f1c8..7cce85a1f7dc 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -33,7 +33,17 @@ for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) /* interface, function and usb clocks; sometimes also an AHB clock */ -static struct clk *iclk, *fclk, *uclk, *hclk; +#define hcd_to_ohci_at91_priv(h) \ + ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv) + +struct ohci_at91_priv { + struct clk *iclk; + struct clk *fclk; + struct clk *uclk; + struct clk *hclk; + bool clocked; + bool wakeup; /* Saved wake-up state for resume */ +}; /* interface and function clocks; sometimes also an AHB clock */ #define DRIVER_DESC "OHCI Atmel driver" @@ -41,45 +51,53 @@ static struct clk *iclk, *fclk, *uclk, *hclk; static const char hcd_name[] = "ohci-atmel"; static struct hc_driver __read_mostly ohci_at91_hc_driver; -static int clocked; + +static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = { + .extra_priv_size = sizeof(struct ohci_at91_priv), +}; extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static void at91_start_clock(void) +static void at91_start_clock(struct ohci_at91_priv *ohci_at91) { + if (ohci_at91->clocked) + return; if (IS_ENABLED(CONFIG_COMMON_CLK)) { - clk_set_rate(uclk, 48000000); - clk_prepare_enable(uclk); + clk_set_rate(ohci_at91->uclk, 48000000); + clk_prepare_enable(ohci_at91->uclk); } - clk_prepare_enable(hclk); - clk_prepare_enable(iclk); - clk_prepare_enable(fclk); - clocked = 1; + clk_prepare_enable(ohci_at91->hclk); + clk_prepare_enable(ohci_at91->iclk); + clk_prepare_enable(ohci_at91->fclk); + ohci_at91->clocked = true; } -static void at91_stop_clock(void) +static void at91_stop_clock(struct ohci_at91_priv *ohci_at91) { - clk_disable_unprepare(fclk); - clk_disable_unprepare(iclk); - clk_disable_unprepare(hclk); + if (!ohci_at91->clocked) + return; + clk_disable_unprepare(ohci_at91->fclk); + clk_disable_unprepare(ohci_at91->iclk); + clk_disable_unprepare(ohci_at91->hclk); if (IS_ENABLED(CONFIG_COMMON_CLK)) - clk_disable_unprepare(uclk); - clocked = 0; + clk_disable_unprepare(ohci_at91->uclk); + ohci_at91->clocked = false; } static void at91_start_hc(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ - at91_start_clock(); + at91_start_clock(ohci_at91); /* * The USB host controller must remain in reset. @@ -91,6 +109,7 @@ static void at91_stop_hc(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); dev_dbg(&pdev->dev, "stop\n"); @@ -102,7 +121,7 @@ static void at91_stop_hc(struct platform_device *pdev) /* * Stop the USB clocks. */ - at91_stop_clock(); + at91_stop_clock(ohci_at91); } @@ -128,7 +147,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, struct at91_usbh_data *board; struct ohci_hcd *ohci; int retval; - struct usb_hcd *hcd = NULL; + struct usb_hcd *hcd; + struct ohci_at91_priv *ohci_at91; struct device *dev = &pdev->dev; struct resource *res; int irq; @@ -142,6 +162,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, hcd = usb_create_hcd(driver, dev, "at91"); if (!hcd) return -ENOMEM; + ohci_at91 = hcd_to_ohci_at91_priv(hcd); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(dev, res); @@ -152,29 +173,29 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - iclk = devm_clk_get(dev, "ohci_clk"); - if (IS_ERR(iclk)) { + ohci_at91->iclk = devm_clk_get(dev, "ohci_clk"); + if (IS_ERR(ohci_at91->iclk)) { dev_err(dev, "failed to get ohci_clk\n"); - retval = PTR_ERR(iclk); + retval = PTR_ERR(ohci_at91->iclk); goto err; } - fclk = devm_clk_get(dev, "uhpck"); - if (IS_ERR(fclk)) { + ohci_at91->fclk = devm_clk_get(dev, "uhpck"); + if (IS_ERR(ohci_at91->fclk)) { dev_err(dev, "failed to get uhpck\n"); - retval = PTR_ERR(fclk); + retval = PTR_ERR(ohci_at91->fclk); goto err; } - hclk = devm_clk_get(dev, "hclk"); - if (IS_ERR(hclk)) { + ohci_at91->hclk = devm_clk_get(dev, "hclk"); + if (IS_ERR(ohci_at91->hclk)) { dev_err(dev, "failed to get hclk\n"); - retval = PTR_ERR(hclk); + retval = PTR_ERR(ohci_at91->hclk); goto err; } if (IS_ENABLED(CONFIG_COMMON_CLK)) { - uclk = devm_clk_get(dev, "usb_clk"); - if (IS_ERR(uclk)) { + ohci_at91->uclk = devm_clk_get(dev, "usb_clk"); + if (IS_ERR(ohci_at91->uclk)) { dev_err(dev, "failed to get uclk\n"); - retval = PTR_ERR(uclk); + retval = PTR_ERR(ohci_at91->uclk); goto err; } } @@ -347,11 +368,13 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, */ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); - desc->wHubCharacteristics |= cpu_to_le16(0x0001); + desc->wHubCharacteristics |= + cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM); if (pdata->overcurrent_supported) { desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM); - desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001); + desc->wHubCharacteristics |= + cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM); } dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", @@ -593,19 +616,27 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int -ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - bool do_wakeup = device_may_wakeup(&pdev->dev); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); int ret; - if (do_wakeup) + /* + * Disable wakeup if we are going to sleep with slow clock mode + * enabled. + */ + ohci_at91->wakeup = device_may_wakeup(dev) + && !at91_suspend_entering_slow_clock(); + + if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); - ret = ohci_suspend(hcd, do_wakeup); + ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { - disable_irq_wake(hcd->irq); + if (ohci_at91->wakeup) + disable_irq_wake(hcd->irq); return ret; } /* @@ -615,7 +646,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) * * REVISIT: some boards will be able to turn VBUS off... */ - if (at91_suspend_entering_slow_clock()) { + if (!ohci_at91->wakeup) { ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); ohci->hc_control &= OHCI_CTRL_RWC; ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); @@ -623,38 +654,37 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); - at91_stop_clock(); + at91_stop_clock(ohci_at91); } return ret; } -static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) +static int ohci_hcd_at91_drv_resume(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); - if (device_may_wakeup(&pdev->dev)) + if (ohci_at91->wakeup) disable_irq_wake(hcd->irq); - if (!clocked) - at91_start_clock(); + at91_start_clock(ohci_at91); ohci_resume(hcd, false); return 0; } -#else -#define ohci_hcd_at91_drv_suspend NULL -#define ohci_hcd_at91_drv_resume NULL #endif +static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend, + ohci_hcd_at91_drv_resume); + static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, .remove = ohci_hcd_at91_drv_remove, .shutdown = usb_hcd_platform_shutdown, - .suspend = ohci_hcd_at91_drv_suspend, - .resume = ohci_hcd_at91_drv_resume, .driver = { .name = "at91_ohci", + .pm = &ohci_hcd_at91_pm_ops, .of_match_table = of_match_ptr(at91_ohci_dt_ids), }, }; @@ -665,7 +695,7 @@ static int __init ohci_at91_init(void) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_at91_hc_driver, NULL); + ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides); /* * The Atmel HW has some unusual quirks, which require Atmel-specific diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 1c76999b2184..e5c33bc98ea4 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -431,7 +431,6 @@ static struct platform_driver ohci_hcd_da8xx_driver = { .resume = ohci_da8xx_resume, #endif .driver = { - .owner = THIS_MODULE, .name = "ohci", }, }; diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 0aa17c937115..fe2aedd8a54d 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -544,15 +544,15 @@ ohci_hub_descriptor ( temp = 1 + (ohci->num_ports / 8); desc->bDescLength = 7 + 2 * temp; - temp = 0; + temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM; if (rh & RH_A_NPS) /* no power switching? */ - temp |= 0x0002; + temp |= HUB_CHAR_NO_LPSM; if (rh & RH_A_PSM) /* per-port power switching? */ - temp |= 0x0001; + temp |= HUB_CHAR_INDV_PORT_LPSM; if (rh & RH_A_NOCP) /* no overcurrent reporting? */ - temp |= 0x0010; + temp |= HUB_CHAR_NO_OCPM; else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */ - temp |= 0x0008; + temp |= HUB_CHAR_INDV_PORT_OCPM; desc->wHubCharacteristics = cpu_to_le16(temp); /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c index 8ddd8f5470cb..4db78f169256 100644 --- a/drivers/usb/host/ohci-jz4740.c +++ b/drivers/usb/host/ohci-jz4740.c @@ -239,7 +239,6 @@ static struct platform_driver ohci_hcd_jz4740_driver = { .remove = jz4740_ohci_remove, .driver = { .name = "jz4740-ohci", - .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index b81d202b15a2..185ceee52d47 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -38,7 +38,8 @@ struct ohci_platform_priv { struct clk *clks[OHCI_MAX_CLKS]; struct reset_control *rst; - struct phy *phy; + struct phy **phys; + int num_phys; }; static const char hcd_name[] = "ohci-platform"; @@ -47,7 +48,7 @@ static int ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); - int clk, ret; + int clk, ret, phy_num; for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) { ret = clk_prepare_enable(priv->clks[clk]); @@ -55,20 +56,28 @@ static int ohci_platform_power_on(struct platform_device *dev) goto err_disable_clks; } - if (priv->phy) { - ret = phy_init(priv->phy); - if (ret) - goto err_disable_clks; - - ret = phy_power_on(priv->phy); - if (ret) - goto err_exit_phy; + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + if (priv->phys[phy_num]) { + ret = phy_init(priv->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(priv->phys[phy_num]); + if (ret) { + phy_exit(priv->phys[phy_num]); + goto err_exit_phy; + } + } } return 0; err_exit_phy: - phy_exit(priv->phy); + while (--phy_num >= 0) { + if (priv->phys[phy_num]) { + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); + } + } err_disable_clks: while (--clk >= 0) clk_disable_unprepare(priv->clks[clk]); @@ -80,11 +89,13 @@ static void ohci_platform_power_off(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); - int clk; + int clk, phy_num; - if (priv->phy) { - phy_power_off(priv->phy); - phy_exit(priv->phy); + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + if (priv->phys[phy_num]) { + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); + } } for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--) @@ -112,7 +123,8 @@ static int ohci_platform_probe(struct platform_device *dev) struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); struct ohci_platform_priv *priv; struct ohci_hcd *ohci; - int err, irq, clk = 0; + const char *phy_name; + int err, irq, phy_num, clk = 0; if (usb_disabled()) return -ENODEV; @@ -160,12 +172,38 @@ static int ohci_platform_probe(struct platform_device *dev) of_property_read_u32(dev->dev.of_node, "num-ports", &ohci->num_ports); - priv->phy = devm_phy_get(&dev->dev, "usb"); - if (IS_ERR(priv->phy)) { - err = PTR_ERR(priv->phy); - if (err == -EPROBE_DEFER) - goto err_put_hcd; - priv->phy = NULL; + priv->num_phys = of_count_phandle_with_args(dev->dev.of_node, + "phys", "#phy-cells"); + priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1; + + priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { + err = of_property_read_string_index( + dev->dev.of_node, + "phy-names", phy_num, + &phy_name); + + if (err < 0) { + if (priv->num_phys > 1) { + dev_err(&dev->dev, "phy-names not provided"); + goto err_put_hcd; + } else + phy_name = "usb"; + } + + priv->phys[phy_num] = devm_phy_get(&dev->dev, + phy_name); + if (IS_ERR(priv->phys[phy_num])) { + err = PTR_ERR(priv->phys[phy_num]); + if ((priv->num_phys > 1) || + (err == -EPROBE_DEFER)) + goto err_put_hcd; + priv->phys[phy_num] = NULL; + } } for (clk = 0; clk < OHCI_MAX_CLKS; clk++) { @@ -328,6 +366,7 @@ static int ohci_platform_resume(struct device *dev) static const struct of_device_id ohci_platform_ids[] = { { .compatible = "generic-ohci", }, + { .compatible = "cavium,octeon-6335-ohci", }, { } }; MODULE_DEVICE_TABLE(of, ohci_platform_ids); diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 965e3e9e688a..4f87a5c61b08 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -229,7 +229,6 @@ static struct platform_driver ohci_hcd_ppc_of_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ppc-of-ohci", - .owner = THIS_MODULE, .of_match_table = ohci_hcd_ppc_of_match, }, }; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 095113ea1fcb..7a1919ca543a 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -249,14 +249,14 @@ static int ohci_s3c2410_hub_control( */ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); - desc->wHubCharacteristics |= cpu_to_le16(0x0001); + desc->wHubCharacteristics |= cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM); if (info->enable_oc) { desc->wHubCharacteristics &= ~cpu_to_le16( HUB_CHAR_OCPM); desc->wHubCharacteristics |= cpu_to_le16( - 0x0008 | - 0x0001); + HUB_CHAR_INDV_PORT_OCPM); } dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index 4e81c804c73e..a8b8d8b8d9f3 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -265,7 +265,6 @@ static struct platform_driver ohci_hcd_sm501_driver = { .suspend = ohci_sm501_suspend, .resume = ohci_sm501_resume, .driver = { - .owner = THIS_MODULE, .name = "sm501-usb", }, }; diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c index bef6dfb0405a..e1b208da460a 100644 --- a/drivers/usb/host/ohci-tilegx.c +++ b/drivers/usb/host/ohci-tilegx.c @@ -199,7 +199,6 @@ static struct platform_driver ohci_hcd_tilegx_driver = { .shutdown = ohci_hcd_tilegx_drv_shutdown, .driver = { .name = "tilegx-ohci", - .owner = THIS_MODULE, } }; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index bb409588d39c..e9a6eec39142 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -368,6 +368,5 @@ static struct platform_driver ohci_hcd_tmio_driver = { .resume = ohci_hcd_tmio_drv_resume, .driver = { .name = "tmio-ohci", - .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 036924e640f5..ef7efb278b15 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -457,11 +457,11 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, memset(&desc->u.hs.DeviceRemovable[0], 0, temp); memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); - temp = 0x0008; /* per-port overcurrent reporting */ + temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */ if (HCS_PPC(oxu->hcs_params)) - temp |= 0x0001; /* per-port power control */ + temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */ else - temp |= 0x0002; /* no power switching */ + temp |= HUB_CHAR_NO_LPSM; /* no power switching */ desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp); } @@ -2598,9 +2598,7 @@ static int oxu_hcd_init(struct usb_hcd *hcd) spin_lock_init(&oxu->lock); - init_timer(&oxu->watchdog); - oxu->watchdog.function = oxu_watchdog; - oxu->watchdog.data = (unsigned long) oxu; + setup_timer(&oxu->watchdog, oxu_watchdog, (unsigned long)oxu); /* * hw default: 1K periodic list heads, one per frame. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ce636466edb7..f9400564cb72 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -603,9 +603,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev) msleep(10); } if (wait_time <= 0) - dev_warn(&pdev->dev, "OHCI: BIOS handoff failed" - " (BIOS bug?) %08x\n", - readl(base + OHCI_CONTROL)); + dev_warn(&pdev->dev, + "OHCI: BIOS handoff failed (BIOS bug?) %08x\n", + readl(base + OHCI_CONTROL)); } #endif @@ -733,8 +733,9 @@ static void ehci_bios_handoff(struct pci_dev *pdev, * and hope nothing goes too wrong */ if (try_handoff) - dev_warn(&pdev->dev, "EHCI: BIOS handoff failed" - " (BIOS bug?) %08x\n", cap); + dev_warn(&pdev->dev, + "EHCI: BIOS handoff failed (BIOS bug?) %08x\n", + cap); pci_write_config_byte(pdev, offset + 2, 0); } @@ -781,8 +782,9 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev) case 0: /* Illegal reserved cap, set cap=0 so we exit */ cap = 0; /* then fallthrough... */ default: - dev_warn(&pdev->dev, "EHCI: unrecognized capability " - "%02x\n", cap & 0xff); + dev_warn(&pdev->dev, + "EHCI: unrecognized capability %02x\n", + cap & 0xff); } offset = (cap >> 8) & 0xff; } @@ -893,8 +895,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) */ if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) { dev_warn(&xhci_pdev->dev, - "CONFIG_USB_XHCI_HCD is turned off, " - "defaulting to EHCI.\n"); + "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n"); dev_warn(&xhci_pdev->dev, "USB 3.0 devices will work at USB 2.0 speeds.\n"); usb_disable_xhci_ports(xhci_pdev); @@ -919,8 +920,9 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, &ports_available); - dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " - "under xHCI: 0x%x\n", ports_available); + dev_dbg(&xhci_pdev->dev, + "USB 3.0 ports that are now enabled under xHCI: 0x%x\n", + ports_available); /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register * Indicate the USB 2.0 ports to be controlled by the xHCI host. @@ -941,8 +943,9 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, &ports_available); - dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over " - "to xHCI: 0x%x\n", ports_available); + dev_dbg(&xhci_pdev->dev, + "USB 2.0 ports that are now switched over to xHCI: 0x%x\n", + ports_available); } EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports); @@ -1010,8 +1013,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) { - dev_warn(&pdev->dev, "xHCI BIOS handoff failed" - " (BIOS bug ?) %08x\n", val); + dev_warn(&pdev->dev, + "xHCI BIOS handoff failed (BIOS bug ?) %08x\n", + val); writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset); } } @@ -1039,8 +1043,8 @@ hc_init: if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET); dev_warn(&pdev->dev, - "xHCI HW not ready after 5 sec (HC bug?) " - "status = 0x%x\n", val); + "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n", + val); } /* Send the halt and disable interrupts command */ @@ -1054,8 +1058,8 @@ hc_init: if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET); dev_warn(&pdev->dev, - "xHCI HW did not halt within %d usec " - "status = 0x%x\n", XHCI_MAX_HALT_USEC, val); + "xHCI HW did not halt within %d usec status = 0x%x\n", + XHCI_MAX_HALT_USEC, val); } iounmap(base); @@ -1075,8 +1079,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) return; if (pci_enable_device(pdev) < 0) { - dev_warn(&pdev->dev, "Can't enable PCI device, " - "BIOS handoff failed.\n"); + dev_warn(&pdev->dev, + "Can't enable PCI device, BIOS handoff failed.\n"); return; } if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c4bcfaedeec9..bdc82fea0a1f 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2141,7 +2141,8 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, desc->bNbrPorts = r8a66597->max_root_hub; desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; - desc->wHubCharacteristics = cpu_to_le16(0x0011); + desc->wHubCharacteristics = + cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM); desc->u.hs.DeviceRemovable[0] = ((1 << r8a66597->max_root_hub) - 1) << 1; desc->u.hs.DeviceRemovable[1] = ~0; @@ -2483,9 +2484,8 @@ static int r8a66597_probe(struct platform_device *pdev) r8a66597->max_root_hub = 2; spin_lock_init(&r8a66597->lock); - init_timer(&r8a66597->rh_timer); - r8a66597->rh_timer.function = r8a66597_timer; - r8a66597->rh_timer.data = (unsigned long)r8a66597; + setup_timer(&r8a66597->rh_timer, r8a66597_timer, + (unsigned long)r8a66597); r8a66597->reg = reg; /* make sure no interrupts are pending */ @@ -2496,9 +2496,8 @@ static int r8a66597_probe(struct platform_device *pdev) for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) { INIT_LIST_HEAD(&r8a66597->pipe_queue[i]); - init_timer(&r8a66597->td_timer[i]); - r8a66597->td_timer[i].function = r8a66597_td_timer; - r8a66597->td_timer[i].data = (unsigned long)r8a66597; + setup_timer(&r8a66597->td_timer[i], r8a66597_td_timer, + (unsigned long)r8a66597); setup_timer(&r8a66597->interval_timer[i], r8a66597_interval_timer, (unsigned long)r8a66597); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 25fb1da8d3d7..4f4ba1ea9e9b 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1103,12 +1103,12 @@ sl811h_hub_descriptor ( desc->bPwrOn2PwrGood = sl811->board->potpg; if (!desc->bPwrOn2PwrGood) desc->bPwrOn2PwrGood = 10; - temp = 0x0001; + temp = HUB_CHAR_INDV_PORT_LPSM; } else - temp = 0x0002; + temp = HUB_CHAR_NO_LPSM; /* no overcurrent errors detection/handling */ - temp |= 0x0010; + temp |= HUB_CHAR_NO_OCPM; desc->wHubCharacteristics = cpu_to_le16(temp); @@ -1691,9 +1691,7 @@ sl811h_probe(struct platform_device *dev) spin_lock_init(&sl811->lock); INIT_LIST_HEAD(&sl811->async); sl811->board = dev_get_platdata(&dev->dev); - init_timer(&sl811->timer); - sl811->timer.function = sl811h_timer; - sl811->timer.data = (unsigned long) sl811; + setup_timer(&sl811->timer, sl811h_timer, (unsigned long)sl811); sl811->addr_reg = addr_reg; sl811->data_reg = data_reg; diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 2894e54e5b9c..ad97e8a1ad1c 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2590,15 +2590,15 @@ static int u132_roothub_descriptor(struct u132 *u132, desc->bNbrPorts = u132->num_ports; temp = 1 + (u132->num_ports / 8); desc->bDescLength = 7 + 2 * temp; - temp = 0; + temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM; if (rh_a & RH_A_NPS) - temp |= 0x0002; + temp |= HUB_CHAR_NO_LPSM; if (rh_a & RH_A_PSM) - temp |= 0x0001; + temp |= HUB_CHAR_INDV_PORT_LPSM; if (rh_a & RH_A_NOCP) - temp |= 0x0010; + temp |= HUB_CHAR_NO_OCPM; else if (rh_a & RH_A_OCPM) - temp |= 0x0008; + temp |= HUB_CHAR_INDV_PORT_OCPM; desc->wHubCharacteristics = cpu_to_le16(temp); retval = u132_read_pcimem(u132, roothub.b, &rh_b); if (retval) diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c index 05f57ffdf9ab..0342991c9507 100644 --- a/drivers/usb/host/uhci-grlib.c +++ b/drivers/usb/host/uhci-grlib.c @@ -188,7 +188,6 @@ static struct platform_driver uhci_grlib_driver = { .shutdown = uhci_hcd_grlib_shutdown, .driver = { .name = "grlib-uhci", - .owner = THIS_MODULE, .of_match_table = uhci_hcd_grlib_of_match, }, }; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 93e17b12fb33..19ba5eafb31e 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -17,8 +17,9 @@ static const __u8 root_hub_hub_des[] = 0x09, /* __u8 bLength; */ 0x29, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ - 0x0a, /* __u16 wHubCharacteristics; */ - 0x00, /* (per-port OC, no power switching) */ + HUB_CHAR_NO_LPSM | /* __u16 wHubCharacteristics; */ + HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */ + 0x00, 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ 0x00, /* __u8 bHubContrCurrent; 0 mA */ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max */ diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index cf8f46003f62..3a3e3eeba291 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -147,7 +147,6 @@ static struct platform_driver uhci_platform_driver = { .shutdown = uhci_hcd_platform_shutdown, .driver = { .name = "platform-uhci", - .owner = THIS_MODULE, .of_match_table = platform_uhci_ids, }, }; diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index bb89175ca6e5..745717ec9c89 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -552,7 +552,7 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, if (ctx->type == XHCI_CTX_TYPE_INPUT) { struct xhci_input_control_ctx *ctrl_ctx = - xhci_get_input_control_ctx(xhci, ctx); + xhci_get_input_control_ctx(ctx); if (!ctrl_ctx) { xhci_warn(xhci, "Could not get input context, bad type.\n"); return; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 5cb3d7a10017..f8336408ef07 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -535,7 +535,7 @@ static void xhci_free_container_ctx(struct xhci_hcd *xhci, kfree(ctx); } -struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, +struct xhci_input_control_ctx *xhci_get_input_control_ctx( struct xhci_container_ctx *ctx) { if (ctx->type != XHCI_CTX_TYPE_INPUT) @@ -784,8 +784,7 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, * Reinstalls the "normal" endpoint ring (at its previous dequeue mark, * not at the beginning of the ring). */ -void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, - struct xhci_ep_ctx *ep_ctx, +void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx, struct xhci_virt_ep *ep) { dma_addr_t addr; @@ -833,9 +832,8 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, static void xhci_init_endpoint_timer(struct xhci_hcd *xhci, struct xhci_virt_ep *ep) { - init_timer(&ep->stop_cmd_timer); - ep->stop_cmd_timer.data = (unsigned long) ep; - ep->stop_cmd_timer.function = xhci_stop_endpoint_command_watchdog; + setup_timer(&ep->stop_cmd_timer, xhci_stop_endpoint_command_watchdog, + (unsigned long)ep); ep->xhci = xhci; } @@ -1342,8 +1340,7 @@ static u32 xhci_get_endpoint_mult(struct usb_device *udev, return ep->ss_ep_comp.bmAttributes; } -static u32 xhci_get_endpoint_type(struct usb_device *udev, - struct usb_host_endpoint *ep) +static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep) { int in; u32 type; @@ -1376,8 +1373,7 @@ static u32 xhci_get_endpoint_type(struct usb_device *udev, * Basically, this is the maxpacket size, multiplied by the burst size * and mult size. */ -static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, - struct usb_device *udev, +static u32 xhci_get_max_esit_payload(struct usb_device *udev, struct usb_host_endpoint *ep) { int max_burst; @@ -1418,7 +1414,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); - endpoint_type = xhci_get_endpoint_type(udev, ep); + endpoint_type = xhci_get_endpoint_type(ep); if (!endpoint_type) return -EINVAL; ep_ctx->ep_info2 = cpu_to_le32(endpoint_type); @@ -1484,7 +1480,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, } ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) | MAX_BURST(max_burst)); - max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); + max_esit_payload = xhci_get_max_esit_payload(udev, ep); ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload)); /* @@ -1773,7 +1769,7 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, return command; } -void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv) +void xhci_urb_free_priv(struct urb_priv *urb_priv) { if (urb_priv) { kfree(urb_priv->td[0]); @@ -1926,7 +1922,7 @@ static int xhci_test_trb_in_td(struct xhci_hcd *xhci, } /* TRB math checks for xhci_trb_in_td(), using the command and event rings. */ -static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) +static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci) { struct { dma_addr_t input_dma; @@ -2452,7 +2448,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) flags); if (!xhci->event_ring) goto fail; - if (xhci_check_trb_in_td_math(xhci, flags) < 0) + if (xhci_check_trb_in_td_math(xhci) < 0) goto fail; xhci->erst.entries = dma_alloc_coherent(dev, @@ -2509,9 +2505,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_print_ir_set(xhci, 0); /* init command timeout timer */ - init_timer(&xhci->cmd_timer); - xhci->cmd_timer.data = (unsigned long) xhci; - xhci->cmd_timer.function = xhci_handle_command_timeout; + setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, + (unsigned long)xhci); /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e692e769c50c..88da8d629820 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -299,7 +299,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) * seconds), then it should assume that the there are * larger problems with the xHC and assert HCRST. */ - ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring, + ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 5 * 1000 * 1000); if (ret < 0) { xhci_err(xhci, "Stopped the command ring failed, " @@ -609,7 +609,7 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, spin_unlock(&xhci->lock); usb_hcd_giveback_urb(hcd, urb, status); - xhci_urb_free_priv(xhci, urb_priv); + xhci_urb_free_priv(urb_priv); spin_lock(&xhci->lock); } } @@ -1110,7 +1110,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, * is not waiting on the configure endpoint command. */ virt_dev = xhci->devs[slot_id]; - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "Could not get input context, bad type.\n"); return; @@ -2354,8 +2354,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, status = 0; break; } - xhci_warn(xhci, "ERROR Unknown event condition, HC probably " - "busted\n"); + xhci_warn(xhci, "ERROR Unknown event condition %u, HC probably busted\n", + trb_comp_code); goto cleanup; } @@ -2497,7 +2497,7 @@ cleanup: urb = td->urb; urb_priv = urb->hcpriv; - xhci_urb_free_priv(xhci, urb_priv); + xhci_urb_free_priv(urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c50d8d202618..ec8ac1674854 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -60,8 +60,7 @@ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, - u32 mask, u32 done, int usec) +int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; @@ -111,7 +110,7 @@ int xhci_halt(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC"); xhci_quiesce(xhci); - ret = xhci_handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(&xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) { xhci->xhc_state |= XHCI_STATE_HALTED; @@ -140,7 +139,7 @@ static int xhci_start(struct xhci_hcd *xhci) * Wait for the HCHalted Status bit to be 0 to indicate the host is * running. */ - ret = xhci_handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(&xhci->op_regs->status, STS_HALT, 0, XHCI_MAX_HALT_USEC); if (ret == -ETIMEDOUT) xhci_err(xhci, "Host took too long to start, " @@ -175,7 +174,7 @@ int xhci_reset(struct xhci_hcd *xhci) command |= CMD_RESET; writel(command, &xhci->op_regs->command); - ret = xhci_handshake(xhci, &xhci->op_regs->command, + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -186,7 +185,7 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = xhci_handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { @@ -473,10 +472,8 @@ static void compliance_mode_recovery(unsigned long arg) static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) { xhci->port_status_u0 = 0; - init_timer(&xhci->comp_mode_recovery_timer); - - xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; - xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; + setup_timer(&xhci->comp_mode_recovery_timer, + compliance_mode_recovery, (unsigned long)xhci); xhci->comp_mode_recovery_timer.expires = jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); @@ -929,7 +926,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) /* Some chips from Fresco Logic need an extraordinary delay */ delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1; - if (xhci_handshake(xhci, &xhci->op_regs->status, + if (xhci_handshake(&xhci->op_regs->status, STS_HALT, STS_HALT, delay)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); @@ -944,7 +941,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) command = readl(&xhci->op_regs->command); command |= CMD_CSS; writel(command, &xhci->op_regs->command); - if (xhci_handshake(xhci, &xhci->op_regs->status, + if (xhci_handshake(&xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); @@ -1011,7 +1008,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); - if (xhci_handshake(xhci, &xhci->op_regs->status, + if (xhci_handshake(&xhci->op_regs->status, STS_RESTORE, 0, 10 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); @@ -1082,7 +1079,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_RUN; writel(command, &xhci->op_regs->command); - xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, + xhci_handshake(&xhci->op_regs->status, STS_HALT, 0, 250 * 1000); /* step 5: walk topology and initialize portsc, @@ -1276,7 +1273,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, return -ENOMEM; command->in_ctx = xhci->devs[slot_id]->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -1374,7 +1371,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = xhci_check_maxpacket(xhci, slot_id, ep_index, urb); if (ret < 0) { - xhci_urb_free_priv(xhci, urb_priv); + xhci_urb_free_priv(urb_priv); urb->hcpriv = NULL; return ret; } @@ -1440,7 +1437,7 @@ dying: urb->ep->desc.bEndpointAddress, urb); ret = -ESHUTDOWN; free_priv: - xhci_urb_free_priv(xhci, urb_priv); + xhci_urb_free_priv(urb_priv); urb->hcpriv = NULL; spin_unlock_irqrestore(&xhci->lock, flags); return ret; @@ -1553,7 +1550,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN); - xhci_urb_free_priv(xhci, urb_priv); + xhci_urb_free_priv(urb_priv); return ret; } if ((xhci->xhc_state & XHCI_STATE_DYING) || @@ -1660,7 +1657,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, in_ctx = xhci->devs[udev->slot_id]->in_ctx; out_ctx = xhci->devs[udev->slot_id]->out_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -1676,8 +1673,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, cpu_to_le32(EP_STATE_DISABLED)) || le32_to_cpu(ctrl_ctx->drop_flags) & xhci_get_endpoint_flag(&ep->desc)) { - xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", - __func__, ep); + /* Do not warn when called after a usb_device_reset */ + if (xhci->devs[udev->slot_id]->eps[ep_index].ring != NULL) + xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", + __func__, ep); return 0; } @@ -1714,7 +1713,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct xhci_container_ctx *in_ctx, *out_ctx; + struct xhci_container_ctx *in_ctx; unsigned int ep_index; struct xhci_input_control_ctx *ctrl_ctx; u32 added_ctxs; @@ -1745,8 +1744,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, virt_dev = xhci->devs[udev->slot_id]; in_ctx = virt_dev->in_ctx; - out_ctx = virt_dev->out_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -1758,8 +1756,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * to add it again without dropping it, reject the addition. */ if (virt_dev->eps[ep_index].ring && - !(le32_to_cpu(ctrl_ctx->drop_flags) & - xhci_get_endpoint_flag(&ep->desc))) { + !(le32_to_cpu(ctrl_ctx->drop_flags) & added_ctxs)) { xhci_warn(xhci, "Trying to add endpoint 0x%x " "without dropping it.\n", (unsigned int) ep->desc.bEndpointAddress); @@ -1769,8 +1766,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, /* If the HCD has already noted the endpoint is enabled, * ignore this request. */ - if (le32_to_cpu(ctrl_ctx->add_flags) & - xhci_get_endpoint_flag(&ep->desc)) { + if (le32_to_cpu(ctrl_ctx->add_flags) & added_ctxs) { xhci_warn(xhci, "xHCI %s called with enabled ep %p\n", __func__, ep); return 0; @@ -1816,7 +1812,7 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir struct xhci_slot_ctx *slot_ctx; int i; - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -2542,7 +2538,7 @@ static int xhci_reserve_bandwidth(struct xhci_hcd *xhci, if (virt_dev->tt_info) old_active_eps = virt_dev->tt_info->active_eps; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -2639,7 +2635,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; - ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); if (!ctrl_ctx) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -2758,7 +2754,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) command->in_ctx = virt_dev->in_ctx; /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -2883,7 +2879,7 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, dma_addr_t addr; in_ctx = xhci->devs[slot_id]->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -3173,7 +3169,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); return -ENOMEM; } - ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -3328,7 +3324,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, */ ep_index = xhci_get_endpoint_index(&eps[0]->desc); command = vdev->eps[ep_index].stream_info->free_streams_command; - ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); if (!ctrl_ctx) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -3346,7 +3342,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_endpoint_copy(xhci, command->in_ctx, vdev->out_ctx, ep_index); - xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx, + xhci_setup_no_streams_ep_input_ctx(ep_ctx, &vdev->eps[ep_index]); } xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx, @@ -3820,7 +3816,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, command->completion = &xhci->addr_dev; slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -4003,7 +3999,7 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci, /* Attempt to issue an Evaluate Context command to change the MEL. */ command = xhci->lpm_command; - ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); if (!ctrl_ctx) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -4741,7 +4737,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); return -ENOMEM; } - ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); @@ -4910,6 +4906,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (retval) goto error; xhci_dbg(xhci, "Called HCD init\n"); + + xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%08x\n", + xhci->hcc_params, xhci->hci_version, xhci->quirks); + return 0; error: kfree(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index cc7c5bb7cbcf..974514762a14 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1605,6 +1605,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn_ratelimited(xhci, fmt, args...) \ dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_info(xhci, fmt, args...) \ + dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* * Registers should always be accessed with double word or quad word accesses. @@ -1712,8 +1714,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep_ctx, struct xhci_stream_info *stream_info); -void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, - struct xhci_ep_ctx *ep_ctx, +void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx, struct xhci_virt_ep *ep); void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, bool drop_control_ep); @@ -1727,14 +1728,13 @@ struct xhci_ring *xhci_stream_id_to_ring( struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_in_ctx, bool allocate_completion, gfp_t mem_flags); -void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); +void xhci_urb_free_priv(struct urb_priv *urb_priv); void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); -int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, - u32 mask, u32 done, int usec); +int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); @@ -1864,7 +1864,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); /* xHCI contexts */ -struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); +struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx); struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); |