summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvcs.c4
-rw-r--r--drivers/tty/pty.c15
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c1
-rw-r--r--drivers/tty/serial/max310x.c29
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c7
-rw-r--r--drivers/tty/tty_io.c5
7 files changed, 10 insertions, 53 deletions
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index c90848919644..9afa1dcef2c2 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -317,7 +317,6 @@ static void hvcs_hangup(struct tty_struct * tty);
static int hvcs_probe(struct vio_dev *dev,
const struct vio_device_id *id);
-static int hvcs_remove(struct vio_dev *dev);
static int __init hvcs_module_init(void);
static void __exit hvcs_module_exit(void);
static int hvcs_initialize(void);
@@ -819,7 +818,7 @@ static int hvcs_probe(
return 0;
}
-static int hvcs_remove(struct vio_dev *dev)
+static void hvcs_remove(struct vio_dev *dev)
{
struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
unsigned long flags;
@@ -849,7 +848,6 @@ static int hvcs_remove(struct vio_dev *dev)
printk(KERN_INFO "HVCS: vty-server@%X removed from the"
" vio bus.\n", dev->unit_address);
- return 0;
};
static struct vio_driver hvcs_vio_driver = {
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 8b2797b6ee44..5e2374580e27 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -66,8 +66,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
- struct file *f;
-
+ set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
@@ -76,17 +75,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&devpts_mutex);
}
#endif
-
- /*
- * This hack is required because a program can open a
- * pty and redirect a console to it, but if the pty is
- * closed and the console is not released, then the
- * slave side will never close. So release the
- * redirect when the master closes.
- */
- f = tty_release_redirect(tty->link);
- if (f)
- fput(f);
+ tty_vhangup(tty->link);
}
}
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 9a872750581c..94af7a5ea497 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1639,8 +1639,6 @@ module_exit(icom_exit);
MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
-MODULE_SUPPORTED_DEVICE
- ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("icom_call_setup.bin");
MODULE_FIRMWARE("icom_res_dce.bin");
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index cd30da0ef083..0ea799bf8dbb 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -19,7 +19,6 @@
MODULE_AUTHOR("Digi International, https://www.digi.com");
MODULE_DESCRIPTION("Driver for the Digi International Neo and Classic PCI based product line");
MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("jsm");
#define JSM_DRIVER_NAME "jsm"
#define NR_PORTS 32
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 9795b2e8b0b2..1b61d26bb7af 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1056,9 +1056,9 @@ static int max310x_startup(struct uart_port *port)
max310x_port_update(port, MAX310X_MODE1_REG,
MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
- /* Reset FIFOs */
- max310x_port_write(port, MAX310X_MODE2_REG,
- MAX310X_MODE2_FIFORST_BIT);
+ /* Configure MODE2 register & Reset FIFOs*/
+ val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
+ max310x_port_write(port, MAX310X_MODE2_REG, val);
max310x_port_update(port, MAX310X_MODE2_REG,
MAX310X_MODE2_FIFORST_BIT, 0);
@@ -1086,27 +1086,8 @@ static int max310x_startup(struct uart_port *port)
/* Clear IRQ status register */
max310x_port_read(port, MAX310X_IRQSTS_REG);
- /*
- * Let's ask for an interrupt after a timeout equivalent to
- * the receiving time of 4 characters after the last character
- * has been received.
- */
- max310x_port_write(port, MAX310X_RXTO_REG, 4);
-
- /*
- * Make sure we also get RX interrupts when the RX FIFO is
- * filling up quickly, so get an interrupt when half of the RX
- * FIFO has been filled in.
- */
- max310x_port_write(port, MAX310X_FIFOTRIGLVL_REG,
- MAX310X_FIFOTRIGLVL_RX(MAX310X_FIFO_SIZE / 2));
-
- /* Enable RX timeout interrupt in LSR */
- max310x_port_write(port, MAX310X_LSR_IRQEN_REG,
- MAX310X_LSR_RXTO_BIT);
-
- /* Enable LSR, RX FIFO trigger, CTS change interrupts */
- val = MAX310X_IRQ_LSR_BIT | MAX310X_IRQ_RXFIFO_BIT | MAX310X_IRQ_TXEMPTY_BIT;
+ /* Enable RX, TX, CTS change interrupts */
+ val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT;
max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT);
return 0;
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 291649f02821..0d85b55ea823 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1177,12 +1177,6 @@ static inline void qcom_geni_serial_enable_early_read(struct geni_se *se,
struct console *con) { }
#endif
-static int qcom_geni_serial_earlycon_exit(struct console *con)
-{
- geni_remove_earlycon_icc_vote();
- return 0;
-}
-
static struct qcom_geni_private_data earlycon_private_data;
static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
@@ -1233,7 +1227,6 @@ static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
dev->con->write = qcom_geni_serial_earlycon_write;
- dev->con->exit = qcom_geni_serial_earlycon_exit;
dev->con->setup = NULL;
qcom_geni_serial_enable_early_read(&se, dev->con);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 74733ec8f565..391bada4cedb 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -544,9 +544,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* @tty: tty device
*
* This is available to the pty code so if the master closes, if the
- * slave is a redirect it can release the redirect. It returns the
- * filp for the redirect, which must be fput when the operations on
- * the tty are completed.
+ * slave is a redirect it can release the redirect.
*/
struct file *tty_release_redirect(struct tty_struct *tty)
{
@@ -561,6 +559,7 @@ struct file *tty_release_redirect(struct tty_struct *tty)
return f;
}
+EXPORT_SYMBOL_GPL(tty_release_redirect);
/**
* __tty_hangup - actual handler for hangup events
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 21:48:56 +0300