diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/hpsa.c | 108 | ||||
-rw-r--r-- | drivers/scsi/hpsa.h | 1 | ||||
-rw-r--r-- | drivers/scsi/hpsa_cmd.h | 3 |
3 files changed, 112 insertions, 0 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 98af5c3ed679..ee17556058c2 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -220,6 +220,8 @@ static inline void finish_cmd(struct CommandList *c); static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h); #define BOARD_NOT_READY 0 #define BOARD_READY 1 +static void hpsa_drain_commands(struct ctlr_info *h); +static void hpsa_flush_cache(struct ctlr_info *h); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -5025,6 +5027,23 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); } +static void hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h) +{ + int i; + u32 doorbell_value; + unsigned long flags; + /* wait until the clear_event_notify bit 6 is cleared by controller. */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + spin_lock_irqsave(&h->lock, flags); + doorbell_value = readl(h->vaddr + SA5_DOORBELL); + spin_unlock_irqrestore(&h->lock, flags); + if (!(doorbell_value & DOORBELL_CLEAR_EVENTS)) + break; + /* delay and try again */ + msleep(20); + } +} + static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h) { int i; @@ -5401,6 +5420,79 @@ static void detect_controller_lockup(struct ctlr_info *h) h->last_heartbeat_timestamp = now; } +static int hpsa_kickoff_rescan(struct ctlr_info *h) +{ + int i; + char *event_type; + + /* Ask the controller to clear the events we're handling. */ + if (h->transMethod & (CFGTBL_Trans_io_accel1) && + (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE || + h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)) { + + if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE) + event_type = "state change"; + if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE) + event_type = "configuration change"; + /* Stop sending new RAID offload reqs via the IO accelerator */ + scsi_block_requests(h->scsi_host); + for (i = 0; i < h->ndevices; i++) + h->dev[i]->offload_enabled = 0; + hpsa_drain_commands(h); + /* Set 'accelerator path config change' bit */ + dev_warn(&h->pdev->dev, + "Acknowledging event: 0x%08x (HP SSD Smart Path %s)\n", + h->events, event_type); + writel(h->events, &(h->cfgtable->clear_event_notify)); + /* Set the "clear event notify field update" bit 6 */ + writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); + /* Wait until ctlr clears 'clear event notify field', bit 6 */ + hpsa_wait_for_clear_event_notify_ack(h); + scsi_unblock_requests(h->scsi_host); + } else { + /* Acknowledge controller notification events. */ + writel(h->events, &(h->cfgtable->clear_event_notify)); + writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL); + hpsa_wait_for_clear_event_notify_ack(h); +#if 0 + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + hpsa_wait_for_mode_change_ack(h); +#endif + } + + /* Something in the device list may have changed to trigger + * the event, so do a rescan. + */ + hpsa_scan_start(h->scsi_host); + /* release reference taken on scsi host in check_controller_events */ + scsi_host_put(h->scsi_host); + return 0; +} + +/* Check a register on the controller to see if there are configuration + * changes (added/changed/removed logical drives, etc.) which mean that + * we should rescan the controller for devices. If so, add the controller + * to the list of controllers needing to be rescanned, and gets a + * reference to the associated scsi_host. + */ +static void hpsa_ctlr_needs_rescan(struct ctlr_info *h) +{ + if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) + return; + + h->events = readl(&(h->cfgtable->event_notify)); + if (!h->events) + return; + + /* + * Take a reference on scsi host for the duration of the scan + * Release in hpsa_kickoff_rescan(). No lock needed for scan_list + * as only a single thread accesses this list. + */ + scsi_host_get(h->scsi_host); + hpsa_kickoff_rescan(h); +} + static void hpsa_monitor_ctlr_worker(struct work_struct *work) { unsigned long flags; @@ -5409,6 +5501,7 @@ static void hpsa_monitor_ctlr_worker(struct work_struct *work) detect_controller_lockup(h); if (h->lockup_detected) return; + hpsa_ctlr_needs_rescan(h); spin_lock_irqsave(&h->lock, flags); if (h->remove_in_progress) { spin_unlock_irqrestore(&h->lock, flags); @@ -5950,6 +6043,21 @@ clean_up: kfree(h->blockFetchTable); } +static void hpsa_drain_commands(struct ctlr_info *h) +{ + int cmds_out; + unsigned long flags; + + do { /* wait for all outstanding commands to drain out */ + spin_lock_irqsave(&h->lock, flags); + cmds_out = h->commands_outstanding; + spin_unlock_irqrestore(&h->lock, flags); + if (cmds_out <= 0) + break; + msleep(100); + } while (1); +} + /* * This is it. Register the PCI driver information for the cards we control * the OS will call our registered routines when it finds one of our cards. diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index ae08f1c46272..df2f88df10be 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -176,6 +176,7 @@ struct ctlr_info { #define HPSATMF_LOG_QRY_TASK (1 << 23) #define HPSATMF_LOG_QRY_TSET (1 << 24) #define HPSATMF_LOG_QRY_ASYNC (1 << 25) + u32 events; }; #define HPSA_ABORT_MSG 0 #define HPSA_DEVICE_RESET_MSG 1 diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index c1ae8d2a6bf2..21f8a616e997 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -128,6 +128,7 @@ #define CFGTBL_AccCmds 0x00000001l #define DOORBELL_CTLR_RESET 0x00000004l #define DOORBELL_CTLR_RESET2 0x00000020l +#define DOORBELL_CLEAR_EVENTS 0x00000040l #define CFGTBL_Trans_Simple 0x00000002l #define CFGTBL_Trans_Performant 0x00000004l @@ -495,6 +496,8 @@ struct CfgTable { u32 io_accel_max_embedded_sg_count; u32 io_accel_request_size_offset; u32 event_notify; +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) +#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) u32 clear_event_notify; }; |