diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_hwi.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 1456 |
1 files changed, 630 insertions, 826 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 2b7b2954ec31..c8d4d87c5473 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -400,9 +400,9 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) } while ((regVal != shiftValue) && time_before(jiffies, start)); if (regVal != shiftValue) { - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW" - " = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, + "TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW = 0x%x\n", + regVal); return -1; } return 0; @@ -416,7 +416,7 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { - u32 value, offset, i; + u32 offset, i; unsigned long flags; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 @@ -467,7 +467,7 @@ static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, so that the written value will be 0x8090c016. This will ensure only down-spreading SSC is enabled on the SPC. *************************************************************/ - value = pm8001_cr32(pm8001_ha, 2, 0xd8); + pm8001_cr32(pm8001_ha, 2, 0xd8); pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ @@ -623,12 +623,10 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) value = pm8001_cr32(pm8001_ha, 0, 0x44); offset = value & 0x03FFFFFF; - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Scratchpad 0 Offset: %x\n", offset)); + pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 Offset: %x\n", offset); pcilogic = (value & 0xFC000000) >> 26; pcibar = get_pci_bar_index(pcilogic); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar)); + pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar); pm8001_ha->main_cfg_tbl_addr = base_addr = pm8001_ha->io_mem[pcibar].memvirtaddr + offset; pm8001_ha->general_stat_tbl_addr = @@ -652,16 +650,15 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) * as this is shared with BIOS data */ if (deviceid == 0x8081 || deviceid == 0x0042) { if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - GSM_SM_BASE)); + pm8001_dbg(pm8001_ha, FAIL, + "Shift Bar4 to 0x%x failed\n", + GSM_SM_BASE); return -1; } } /* check the firmware status */ if (-1 == check_fw_ready(pm8001_ha)) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Firmware is not ready!\n")); + pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n"); return -EBUSY; } @@ -686,8 +683,7 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) } /* notify firmware update finished and check initialization status */ if (0 == mpi_init_check(pm8001_ha)) { - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("MPI initialize successful!\n")); + pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n"); } else return -EBUSY; /*This register is a 16-bit timer with a resolution of 1us. This is the @@ -709,9 +705,9 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid); if (deviceid == 0x8081 || deviceid == 0x0042) { if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - GSM_SM_BASE)); + pm8001_dbg(pm8001_ha, FAIL, + "Shift Bar4 to 0x%x failed\n", + GSM_SM_BASE); return -1; } } @@ -729,8 +725,8 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) } while ((value != 0) && (--max_wait_count)); if (!max_wait_count) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value)); + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=0x%x\n", + value); return -1; } @@ -747,9 +743,8 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) break; } while (--max_wait_count); if (!max_wait_count) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk(" TIME OUT MPI State = 0x%x\n", - gst_len_mpistate & GST_MPI_STATE_MASK)); + pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n", + gst_len_mpistate & GST_MPI_STATE_MASK); return -1; } return 0; @@ -763,25 +758,23 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha) { u32 regVal, regVal1, regVal2; if (mpi_uninit_check(pm8001_ha) != 0) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("MPI state is not ready\n")); + pm8001_dbg(pm8001_ha, FAIL, "MPI state is not ready\n"); return -1; } /* read the scratch pad 2 register bit 2 */ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) & SCRATCH_PAD2_FWRDY_RST; if (regVal == SCRATCH_PAD2_FWRDY_RST) { - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Firmware is ready for reset .\n")); + pm8001_dbg(pm8001_ha, INIT, "Firmware is ready for reset.\n"); } else { unsigned long flags; /* Trigger NMI twice via RB6 */ spin_lock_irqsave(&pm8001_ha->lock, flags); if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - RB6_ACCESS_REG)); + pm8001_dbg(pm8001_ha, FAIL, + "Shift Bar4 to 0x%x failed\n", + RB6_ACCESS_REG); return -1; } pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, @@ -794,16 +787,14 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha) if (regVal != SCRATCH_PAD2_FWRDY_RST) { regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1" - "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n", - regVal1, regVal2)); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0))); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MSGU_SCRATCH_PAD1=0x%x, MSGU_SCRATCH_PAD2=0x%x\n", + regVal1, regVal2); + pm8001_dbg(pm8001_ha, FAIL, + "SCRATCH_PAD0 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)); + pm8001_dbg(pm8001_ha, FAIL, + "SCRATCH_PAD3 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)); spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } @@ -828,7 +819,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) /* step1: Check FW is ready for soft reset */ if (soft_reset_ready_check(pm8001_ha) != 0) { - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n")); + pm8001_dbg(pm8001_ha, FAIL, "FW is not ready\n"); return -1; } @@ -838,46 +829,43 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) spin_lock_irqsave(&pm8001_ha->lock, flags); if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - MBIC_AAP1_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n", + MBIC_AAP1_ADDR_BASE); return -1; } regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0); /* map 0x70000 to BAR4(0x20), BAR2(win) */ if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - MBIC_IOP_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n", + MBIC_IOP_ADDR_BASE); return -1; } regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0); regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "PCIE -Event Interrupt Enable = 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0); regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("PCIE - Event Interrupt = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "PCIE - Event Interrupt = 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal); regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "PCIE -Error Interrupt Enable = 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0); regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "PCIE - Error Interrupt = 0x%x\n", regVal); pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal); /* read the scratch pad 1 register bit 2 */ @@ -893,15 +881,13 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) /* map 0x0700000 to BAR4(0x20), BAR2(win) */ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - GSM_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n", + GSM_ADDR_BASE); return -1; } - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and" - " Reset = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x0(0x00007b88)-GSM Configuration and Reset = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)); /* step 3: host read GSM Configuration and Reset register */ regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET); @@ -916,59 +902,52 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) regVal &= ~(0x00003b00); /* host write GSM Configuration and Reset register */ pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM " - "Configuration and Reset is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM Configuration and Reset is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)); /* step 4: */ /* disable GSM - Read Address Parity Check */ regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700038 - Read Address Parity Check " - "Enable = 0x%x\n", regVal1)); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n", + regVal1); pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable" - "is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)); /* disable GSM - Write Address Parity Check */ regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700040 - Write Address Parity Check" - " Enable = 0x%x\n", regVal2)); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700040 - Write Address Parity Check Enable = 0x%x\n", + regVal2); pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700040 - Write Address Parity Check " - "Enable is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)); /* disable GSM - Write Data Parity Check */ regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x300048 - Write Data Parity Check" - " Enable = 0x%x\n", regVal3)); + pm8001_dbg(pm8001_ha, INIT, "GSM 0x300048 - Write Data Parity Check Enable = 0x%x\n", + regVal3); pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable" - "is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x300048 - Write Data Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)); /* step 5: delay 10 usec */ udelay(10); /* step 5-b: set GPIO-0 output control to tristate anyway */ if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - GPIO_ADDR_BASE)); + pm8001_dbg(pm8001_ha, INIT, "Shift Bar4 to 0x%x failed\n", + GPIO_ADDR_BASE); return -1; } regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GPIO Output Control Register:" - " = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "GPIO Output Control Register: = 0x%x\n", + regVal); /* set GPIO-0 output control to tri-state */ regVal &= 0xFFFFFFFC; pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal); @@ -977,23 +956,20 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) /* map 0x00000 to BAR4(0x20), BAR2(win) */ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SPC Shift Bar4 to 0x%x failed\n", - SPC_TOP_LEVEL_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n", + SPC_TOP_LEVEL_ADDR_BASE); return -1; } regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Top Register before resetting IOP/AAP1" - ":= 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting IOP/AAP1:= 0x%x\n", + regVal); regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS); pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal); /* step 7: Reset the BDMA/OSSP */ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Top Register before resetting BDMA/OSSP" - ": = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting BDMA/OSSP: = 0x%x\n", + regVal); regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP); pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal); @@ -1002,9 +978,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) /* step 9: bring the BDMA and OSSP out of reset */ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("Top Register before bringing up BDMA/OSSP" - ":= 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, + "Top Register before bringing up BDMA/OSSP:= 0x%x\n", + regVal); regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP); pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal); @@ -1015,14 +991,13 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) /* map 0x0700000 to BAR4(0x20), BAR2(win) */ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SPC Shift Bar4 to 0x%x failed\n", - GSM_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n", + GSM_ADDR_BASE); return -1; } - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and " - "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x0 (0x00007b88)-GSM Configuration and Reset = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)); regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET); /* Put those bits to high */ /* GSM XCBI offset = 0x70 0000 @@ -1034,44 +1009,37 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) */ regVal |= (GSM_CONFIG_RESET_VALUE); pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM" - " Configuration and Reset is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET))); + pm8001_dbg(pm8001_ha, INIT, "GSM (0x00004088 ==> 0x00007b88) - GSM Configuration and Reset is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)); /* step 12: Restore GSM - Read Address Parity Check */ regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK); /* just for debugging */ - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable" - " = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n", + regVal); pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700038 - Read Address Parity" - " Check Enable is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)); /* Restore GSM - Write Address Parity Check */ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK); pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700040 - Write Address Parity Check" - " Enable is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)); /* Restore GSM - Write Data Parity Check */ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK); pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable" - "is set to = 0x%x\n", - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK))); + pm8001_dbg(pm8001_ha, INIT, + "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n", + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)); /* step 13: bring the IOP and AAP1 out of reset */ /* map 0x00000 to BAR4(0x20), BAR2(win) */ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Shift Bar4 to 0x%x failed\n", - SPC_TOP_LEVEL_ADDR_BASE)); + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n", + SPC_TOP_LEVEL_ADDR_BASE); return -1; } regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET); @@ -1094,22 +1062,20 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) if (!max_wait_count) { regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("TIMEOUT : ToggleVal 0x%x," - "MSGU_SCRATCH_PAD1 = 0x%x\n", - toggleVal, regVal)); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, - MSGU_SCRATCH_PAD_0))); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD2 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, - MSGU_SCRATCH_PAD_2))); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, - MSGU_SCRATCH_PAD_3))); + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT : ToggleVal 0x%x,MSGU_SCRATCH_PAD1 = 0x%x\n", + toggleVal, regVal); + pm8001_dbg(pm8001_ha, FAIL, + "SCRATCH_PAD0 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, + MSGU_SCRATCH_PAD_0)); + pm8001_dbg(pm8001_ha, FAIL, + "SCRATCH_PAD2 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, + MSGU_SCRATCH_PAD_2)); + pm8001_dbg(pm8001_ha, FAIL, + "SCRATCH_PAD3 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, + MSGU_SCRATCH_PAD_3)); spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } @@ -1124,22 +1090,22 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) if (check_fw_ready(pm8001_ha) == -1) { regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); /* return error if MPI Configuration Table not ready */ - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("FW not ready SCRATCH_PAD1" - " = 0x%x\n", regVal)); + pm8001_dbg(pm8001_ha, INIT, + "FW not ready SCRATCH_PAD1 = 0x%x\n", + regVal); regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2); /* return error if MPI Configuration Table not ready */ - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("FW not ready SCRATCH_PAD2" - " = 0x%x\n", regVal)); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, - MSGU_SCRATCH_PAD_0))); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", - pm8001_cr32(pm8001_ha, 0, - MSGU_SCRATCH_PAD_3))); + pm8001_dbg(pm8001_ha, INIT, + "FW not ready SCRATCH_PAD2 = 0x%x\n", + regVal); + pm8001_dbg(pm8001_ha, INIT, + "SCRATCH_PAD0 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, + MSGU_SCRATCH_PAD_0)); + pm8001_dbg(pm8001_ha, INIT, + "SCRATCH_PAD3 value = 0x%x\n", + pm8001_cr32(pm8001_ha, 0, + MSGU_SCRATCH_PAD_3)); spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } @@ -1147,8 +1113,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) pm8001_bar4_shift(pm8001_ha, 0); spin_unlock_irqrestore(&pm8001_ha->lock, flags); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("SPC soft reset Complete\n")); + pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n"); return 0; } @@ -1156,8 +1121,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) { u32 i; u32 regVal; - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("chip reset start\n")); + pm8001_dbg(pm8001_ha, INIT, "chip reset start\n"); /* do SPC chip reset. */ regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET); @@ -1181,8 +1145,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) mdelay(1); } while ((--i) != 0); - PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("chip reset finished\n")); + pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n"); } /** @@ -1356,12 +1319,18 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha, { u32 Header = 0, hpriority = 0, bc = 1, category = 0x02; void *pMessage; - - if (pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size, - &pMessage) < 0) { - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("No free mpi buffer\n")); - return -ENOMEM; + unsigned long flags; + int q_index = circularQ - pm8001_ha->inbnd_q_tbl; + int rv = -1; + + WARN_ON(q_index >= PM8001_MAX_INB_NUM); + spin_lock_irqsave(&circularQ->iq_lock, flags); + rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size, + &pMessage); + if (rv < 0) { + pm8001_dbg(pm8001_ha, IO, "No free mpi buffer\n"); + rv = -ENOMEM; + goto done; } if (nb > (pm8001_ha->iomb_size - sizeof(struct mpi_msg_hdr))) @@ -1380,11 +1349,13 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha, /*Update the PI to the firmware*/ pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar, circularQ->pi_offset, circularQ->producer_idx); - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n", - responseQueue, opCode, circularQ->producer_idx, - circularQ->consumer_index)); - return 0; + pm8001_dbg(pm8001_ha, DEVIO, + "INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n", + responseQueue, opCode, circularQ->producer_idx, + circularQ->consumer_index); +done: + spin_unlock_irqrestore(&circularQ->iq_lock, flags); + return rv; } u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg, @@ -1398,17 +1369,17 @@ u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg, pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + circularQ->consumer_idx * pm8001_ha->iomb_size); if (pOutBoundMsgHeader != msgHeader) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("consumer_idx = %d msgHeader = %p\n", - circularQ->consumer_idx, msgHeader)); + pm8001_dbg(pm8001_ha, FAIL, + "consumer_idx = %d msgHeader = %p\n", + circularQ->consumer_idx, msgHeader); /* Update the producer index from SPC */ producer_index = pm8001_read_32(circularQ->pi_virt); circularQ->producer_index = cpu_to_le32(producer_index); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("consumer_idx = %d producer_index = %d" - "msgHeader = %p\n", circularQ->consumer_idx, - circularQ->producer_index, msgHeader)); + pm8001_dbg(pm8001_ha, FAIL, + "consumer_idx = %d producer_index = %dmsgHeader = %p\n", + circularQ->consumer_idx, + circularQ->producer_index, msgHeader); return 0; } /* free the circular queue buffer elements associated with the message*/ @@ -1420,9 +1391,8 @@ u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg, /* Update the producer index from SPC*/ producer_index = pm8001_read_32(circularQ->pi_virt); circularQ->producer_index = cpu_to_le32(producer_index); - PM8001_IO_DBG(pm8001_ha, - pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx, - circularQ->producer_index)); + pm8001_dbg(pm8001_ha, IO, " CI=%d PI=%d\n", + circularQ->consumer_idx, circularQ->producer_index); return 0; } @@ -1452,10 +1422,10 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, /* read header */ header_tmp = pm8001_read_32(msgHeader); msgHeader_tmp = cpu_to_le32(header_tmp); - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "outbound opcode msgheader:%x ci=%d pi=%d\n", - msgHeader_tmp, circularQ->consumer_idx, - circularQ->producer_index)); + pm8001_dbg(pm8001_ha, DEVIO, + "outbound opcode msgheader:%x ci=%d pi=%d\n", + msgHeader_tmp, circularQ->consumer_idx, + circularQ->producer_index); if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) { if (OPC_OUB_SKIP_ENTRY != (le32_to_cpu(msgHeader_tmp) & 0xfff)) { @@ -1464,12 +1434,11 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, sizeof(struct mpi_msg_hdr); *pBC = (u8)((le32_to_cpu(msgHeader_tmp) >> 24) & 0x1f); - PM8001_IO_DBG(pm8001_ha, - pm8001_printk(": CI=%d PI=%d " - "msgHeader=%x\n", - circularQ->consumer_idx, - circularQ->producer_index, - msgHeader_tmp)); + pm8001_dbg(pm8001_ha, IO, + ": CI=%d PI=%d msgHeader=%x\n", + circularQ->consumer_idx, + circularQ->producer_index, + msgHeader_tmp); return MPI_IO_STATUS_SUCCESS; } else { circularQ->consumer_idx = @@ -1578,17 +1547,15 @@ void pm8001_work_fn(struct work_struct *work) ts->stat = SAS_QUEUE_FULL; pm8001_dev = ccb->device; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); spin_lock_irqsave(&t->task_state_lock, flags1); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags1); - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p" - " done with event 0x%x resp 0x%x stat 0x%x but" - " aborted by upper layer!\n", - t, pw->handler, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, pw->handler, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); spin_unlock_irqrestore(&pm8001_ha->lock, flags); } else { @@ -1608,26 +1575,16 @@ void pm8001_work_fn(struct work_struct *work) unsigned long flags, flags1; int i, ret = 0; - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); ret = pm8001_query_task(t); - PM8001_IO_DBG(pm8001_ha, - switch (ret) { - case TMF_RESP_FUNC_SUCC: - pm8001_printk("...Task on lu\n"); - break; - - case TMF_RESP_FUNC_COMPLETE: - pm8001_printk("...Task NOT on lu\n"); - break; - - default: - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "...query task failed!!!\n")); - break; - }); + if (ret == TMF_RESP_FUNC_SUCC) + pm8001_dbg(pm8001_ha, IO, "...Task on lu\n"); + else if (ret == TMF_RESP_FUNC_COMPLETE) + pm8001_dbg(pm8001_ha, IO, "...Task NOT on lu\n"); + else + pm8001_dbg(pm8001_ha, DEVIO, "...query task failed!!!\n"); spin_lock_irqsave(&pm8001_ha->lock, flags); @@ -1672,8 +1629,7 @@ void pm8001_work_fn(struct work_struct *work) break; default: /* device misbehavior */ ret = TMF_RESP_FUNC_FAILED; - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("...Reset phy\n")); + pm8001_dbg(pm8001_ha, IO, "...Reset phy\n"); pm8001_I_T_nexus_reset(dev); break; } @@ -1687,15 +1643,14 @@ void pm8001_work_fn(struct work_struct *work) default: /* device misbehavior */ spin_unlock_irqrestore(&pm8001_ha->lock, flags); ret = TMF_RESP_FUNC_FAILED; - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("...Reset phy\n")); + pm8001_dbg(pm8001_ha, IO, "...Reset phy\n"); pm8001_I_T_nexus_reset(dev); } if (ret == TMF_RESP_FUNC_FAILED) t = NULL; pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev); - PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n")); + pm8001_dbg(pm8001_ha, IO, "...Complete\n"); } break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: dev = pm8001_dev->sas_device; @@ -1749,15 +1704,14 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha, int ret; if (!pm8001_ha_dev) { - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n")); + pm8001_dbg(pm8001_ha, FAIL, "dev is null\n"); return; } task = sas_alloc_slow_task(GFP_ATOMIC); if (!task) { - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot " - "allocate task\n")); + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n"); return; } @@ -1802,8 +1756,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha, task = sas_alloc_slow_task(GFP_ATOMIC); if (!task) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("cannot allocate task !!!\n")); + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n"); return; } task->task_done = pm8001_task_done; @@ -1811,8 +1764,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha, res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); if (res) { sas_free_task(task); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("cannot allocate tag !!!\n")); + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate tag !!!\n"); return; } @@ -1823,8 +1775,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha, if (!dev) { sas_free_task(task); pm8001_tag_free(pm8001_ha, ccb_tag); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Domain device cannot be allocated\n")); + pm8001_dbg(pm8001_ha, FAIL, + "Domain device cannot be allocated\n"); return; } task->dev = dev; @@ -1901,27 +1853,25 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) t = ccb->task; if (status && status != IO_UNDERFLOW) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("sas IO status 0x%x\n", status)); + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status); if (unlikely(!t || !t->lldd_task || !t->dev)) return; ts = &t->task_status; /* Print sas address of IO failed device */ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && (status != IO_UNDERFLOW)) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SAS Address of IO Failure Drive:" - "%016llx", SAS_ADDR(t->dev->sas_addr))); + pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n", + SAS_ADDR(t->dev->sas_addr)); if (status) - PM8001_IOERR_DBG(pm8001_ha, pm8001_printk( - "status:0x%x, tag:0x%x, task:0x%p\n", - status, tag, t)); + pm8001_dbg(pm8001_ha, IOERR, + "status:0x%x, tag:0x%x, task:0x%p\n", + status, tag, t); switch (status) { case IO_SUCCESS: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS" - ",param = %d\n", param)); + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS,param = %d\n", + param); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_GOOD; @@ -1933,69 +1883,63 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) sas_ssp_task_response(pm8001_ha->dev, t, iu); } if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_ABORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_ABORTED IOMB Tag\n")); + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_ABORTED_TASK; break; case IO_UNDERFLOW: /* SSP Completion with error */ - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW" - ",param = %d\n", param)); + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW,param = %d\n", + param); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_UNDERRUN; ts->residual = param; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_NO_DEVICE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_NO_DEVICE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_PHY_DOWN; break; case IO_XFER_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; /* Force the midlayer to retry */ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_XFER_ERROR_PHY_NOT_READY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_EPROTO; break; case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; break; case IO_OPEN_CNX_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; @@ -2005,68 +1949,59 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); break; case IO_OPEN_CNX_ERROR_BAD_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_BAD_DEST; break; case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_" - "NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_CONN_RATE; break; case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_WRONG_DEST; break; case IO_XFER_ERROR_NAK_RECEIVED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_XFER_ERROR_ACK_NAK_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; break; case IO_XFER_ERROR_DMA: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_DMA\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_XFER_OPEN_RETRY_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_XFER_ERROR_OFFSET_MISMATCH: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_PORT_IN_RESET: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_PORT_IN_RESET\n")); + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_DS_NON_OPERATIONAL: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; if (!t->uldd_task) @@ -2075,51 +2010,44 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) IO_DS_NON_OPERATIONAL); break; case IO_DS_IN_RECOVERY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_IN_RECOVERY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_TM_TAG_NOT_FOUND: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_TM_TAG_NOT_FOUND\n")); + pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_SSP_EXT_IU_ZERO_LEN_ERROR: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n")); + pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown status 0x%x\n", status)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status); /* not allowed case. Therefore, return failed status */ ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; break; } - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("scsi_status = %x\n ", - psspPayload->ssp_resp_iu.status)); + pm8001_dbg(pm8001_ha, IO, "scsi_status = %x\n", + psspPayload->ssp_resp_iu.status); spin_lock_irqsave(&t->task_state_lock, flags); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with" - " io_status 0x%x resp 0x%x " - "stat 0x%x but aborted by upper layer!\n", - t, status, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else { spin_unlock_irqrestore(&t->task_state_lock, flags); @@ -2148,60 +2076,52 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) t = ccb->task; pm8001_dev = ccb->device; if (event) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("sas IO status 0x%x\n", event)); + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event); if (unlikely(!t || !t->lldd_task || !t->dev)) return; ts = &t->task_status; - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("port_id = %x,device_id = %x\n", - port_id, dev_id)); + pm8001_dbg(pm8001_ha, DEVIO, "port_id = %x,device_id = %x\n", + port_id, dev_id); switch (event) { case IO_OVERFLOW: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");) + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; ts->residual = 0; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK); return; case IO_XFER_ERROR_PHY_NOT_READY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT" - "_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_EPROTO; break; case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; break; case IO_OPEN_CNX_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; @@ -2211,88 +2131,78 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); break; case IO_OPEN_CNX_ERROR_BAD_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_BAD_DEST; break; case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_" - "NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_CONN_RATE; break; case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_WRONG_DEST; break; case IO_XFER_ERROR_NAK_RECEIVED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_XFER_ERROR_ACK_NAK_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; break; case IO_XFER_OPEN_RETRY_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT); return; case IO_XFER_ERROR_UNEXPECTED_PHASE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_ERROR_XFER_RDY_OVERRUN: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_ERROR_OFFSET_MISMATCH: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; break; case IO_XFER_CMD_FRAME_ISSUED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk(" IO_XFER_CMD_FRAME_ISSUED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n"); return; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown status 0x%x\n", event)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event); /* not allowed case. Therefore, return failed status */ ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; @@ -2304,10 +2214,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with" - " event 0x%x resp 0x%x " - "stat 0x%x but aborted by upper layer!\n", - t, event, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, event, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else { spin_unlock_irqrestore(&t->task_state_lock, flags); @@ -2343,8 +2251,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) tag = le32_to_cpu(psataPayload->tag); if (!tag) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("tag null\n")); + pm8001_dbg(pm8001_ha, FAIL, "tag null\n"); return; } ccb = &pm8001_ha->ccb_info[tag]; @@ -2353,8 +2260,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) t = ccb->task; pm8001_dev = ccb->device; } else { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("ccb null\n")); + pm8001_dbg(pm8001_ha, FAIL, "ccb null\n"); return; } @@ -2362,29 +2268,26 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) if (t->dev && (t->dev->lldd_dev)) pm8001_dev = t->dev->lldd_dev; } else { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task null\n")); + pm8001_dbg(pm8001_ha, FAIL, "task null\n"); return; } if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG)) && unlikely(!t || !t->lldd_task || !t->dev)) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task or dev null\n")); + pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n"); return; } ts = &t->task_status; if (!ts) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("ts null\n")); + pm8001_dbg(pm8001_ha, FAIL, "ts null\n"); return; } if (status) - PM8001_IOERR_DBG(pm8001_ha, pm8001_printk( - "status:0x%x, tag:0x%x, task::0x%p\n", - status, tag, t)); + pm8001_dbg(pm8001_ha, IOERR, + "status:0x%x, tag:0x%x, task::0x%p\n", + status, tag, t); /* Print sas address of IO failed device */ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && @@ -2416,19 +2319,19 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) & 0xff000000)) + pm8001_dev->attached_phy + 0x10); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SAS Address of IO Failure Drive:" - "%08x%08x", temp_sata_addr_hi, - temp_sata_addr_low)); + pm8001_dbg(pm8001_ha, FAIL, + "SAS Address of IO Failure Drive:%08x%08x\n", + temp_sata_addr_hi, + temp_sata_addr_low); } else { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SAS Address of IO Failure Drive:" - "%016llx", SAS_ADDR(t->dev->sas_addr))); + pm8001_dbg(pm8001_ha, FAIL, + "SAS Address of IO Failure Drive:%016llx\n", + SAS_ADDR(t->dev->sas_addr)); } } switch (status) { case IO_SUCCESS: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_GOOD; @@ -2450,99 +2353,102 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_PROTO_RESPONSE; ts->residual = param; - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("SAS_PROTO_RESPONSE len = %d\n", - param)); + pm8001_dbg(pm8001_ha, IO, + "SAS_PROTO_RESPONSE len = %d\n", + param); sata_resp = &psataPayload->sata_resp[0]; resp = (struct ata_task_resp *)ts->buf; if (t->ata_task.dma_xfer == 0 && t->data_dir == DMA_FROM_DEVICE) { len = sizeof(struct pio_setup_fis); - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("PIO read len = %d\n", len)); + pm8001_dbg(pm8001_ha, IO, + "PIO read len = %d\n", len); } else if (t->ata_task.use_ncq) { len = sizeof(struct set_dev_bits_fis); - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("FPDMA len = %d\n", len)); + pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n", + len); } else { len = sizeof(struct dev_to_host_fis); - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("other len = %d\n", len)); + pm8001_dbg(pm8001_ha, IO, "other len = %d\n", + len); } if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) { resp->frame_len = len; memcpy(&resp->ending_fis[0], sata_resp, len); ts->buf_valid_size = sizeof(*resp); } else - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("response to large\n")); + pm8001_dbg(pm8001_ha, IO, + "response too large\n"); } if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_ABORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_ABORTED IOMB Tag\n")); + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_ABORTED_TASK; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; /* following cases are to do cases */ case IO_UNDERFLOW: /* SATA Completion with error */ - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_UNDERFLOW param = %d\n", param)); + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_UNDERRUN; ts->residual = param; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_NO_DEVICE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_NO_DEVICE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_PHY_DOWN; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_INTERRUPTED; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_PHY_NOT_READY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT" - "_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_EPROTO; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_OPEN_CNX_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; if (!t->uldd_task) { @@ -2556,8 +2462,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } break; case IO_OPEN_CNX_ERROR_BAD_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_BAD_DEST; @@ -2572,17 +2478,15 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } break; case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_" - "NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_CONN_RATE; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES" - "_BUSY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; if (!t->uldd_task) { @@ -2596,57 +2500,65 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } break; case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_NAK_RECEIVED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_ACK_NAK_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_DMA: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_DMA\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_ABORTED_TASK; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_SATA_LINK_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_DEV_NO_RESPONSE; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_REJECTED_NCQ_MODE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_UNDERRUN; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_OPEN_RETRY_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_PORT_IN_RESET: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_PORT_IN_RESET\n")); + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_DS_NON_OPERATIONAL: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; if (!t->uldd_task) { @@ -2659,14 +2571,14 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } break; case IO_DS_IN_RECOVERY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk(" IO_DS_IN_RECOVERY\n")); + pm8001_dbg(pm8001_ha, IO, " IO_DS_IN_RECOVERY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; case IO_DS_IN_ERROR: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_IN_ERROR\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; if (!t->uldd_task) { @@ -2679,18 +2591,21 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) } break; case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown status 0x%x\n", status)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status); /* not allowed case. Therefore, return failed status */ ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); break; } spin_lock_irqsave(&t->task_state_lock, flags); @@ -2699,10 +2614,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task 0x%p done with io_status 0x%x" - " resp 0x%x stat 0x%x but aborted by upper layer!\n", - t, status, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else { spin_unlock_irqrestore(&t->task_state_lock, flags); @@ -2731,12 +2645,10 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) t = ccb->task; pm8001_dev = ccb->device; } else { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("No CCB !!!. returning\n")); + pm8001_dbg(pm8001_ha, FAIL, "No CCB !!!. returning\n"); } if (event) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("SATA EVENT 0x%x\n", event)); + pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event); /* Check if this is NCQ error */ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) { @@ -2752,61 +2664,54 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) t = ccb->task; pm8001_dev = ccb->device; if (event) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("sata IO status 0x%x\n", event)); + pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event); if (unlikely(!t || !t->lldd_task || !t->dev)) return; ts = &t->task_status; - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n", - port_id, dev_id, tag, event)); + pm8001_dbg(pm8001_ha, DEVIO, + "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n", + port_id, dev_id, tag, event); switch (event) { case IO_OVERFLOW: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; ts->residual = 0; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_XFER_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_INTERRUPTED; break; case IO_XFER_ERROR_PHY_NOT_READY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT" - "_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_EPROTO; break; case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; break; case IO_OPEN_CNX_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_DEV_NO_RESPONSE; if (!t->uldd_task) { @@ -2820,94 +2725,82 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) } break; case IO_OPEN_CNX_ERROR_BAD_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"); ts->resp = SAS_TASK_UNDELIVERED; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_BAD_DEST; break; case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_" - "NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_CONN_RATE; break; case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_WRONG_DEST; break; case IO_XFER_ERROR_NAK_RECEIVED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; break; case IO_XFER_ERROR_PEER_ABORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_NAK_R_ERR; break; case IO_XFER_ERROR_REJECTED_NCQ_MODE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_UNDERRUN; break; case IO_XFER_OPEN_RETRY_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_ERROR_UNEXPECTED_PHASE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_ERROR_XFER_RDY_OVERRUN: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_ERROR_OFFSET_MISMATCH: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; case IO_XFER_CMD_FRAME_ISSUED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n"); break; case IO_XFER_PIO_SETUP_ERROR: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown status 0x%x\n", event)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event); /* not allowed case. Therefore, return failed status */ ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_TO; @@ -2919,10 +2812,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task 0x%p done with io_status 0x%x" - " resp 0x%x stat 0x%x but aborted by upper layer!\n", - t, event, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, event, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else { spin_unlock_irqrestore(&t->task_state_lock, flags); @@ -2952,86 +2844,79 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts = &t->task_status; pm8001_dev = ccb->device; if (status) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("smp IO status 0x%x\n", status)); - PM8001_IOERR_DBG(pm8001_ha, - pm8001_printk("status:0x%x, tag:0x%x, task:0x%p\n", - status, tag, t)); + pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status); + pm8001_dbg(pm8001_ha, IOERR, + "status:0x%x, tag:0x%x, task:0x%p\n", + status, tag, t); } if (unlikely(!t || !t->lldd_task || !t->dev)) return; switch (status) { case IO_SUCCESS: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_GOOD; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_ABORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_ABORTED IOMB\n")); + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_ABORTED_TASK; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_OVERFLOW: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DATA_OVERRUN; ts->residual = 0; if (pm8001_dev) - pm8001_dev->running_req--; + atomic_dec(&pm8001_dev->running_req); break; case IO_NO_DEVICE: - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_PHY_DOWN; break; case IO_ERROR_HW_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_ERROR_HW_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_BUSY; break; case IO_XFER_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_BUSY; break; case IO_XFER_ERROR_PHY_NOT_READY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_BUSY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; break; case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; break; case IO_OPEN_CNX_ERROR_BREAK: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_UNKNOWN; @@ -3040,76 +2925,67 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); break; case IO_OPEN_CNX_ERROR_BAD_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_BAD_DEST; break; case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_" - "NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_CONN_RATE; break; case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_WRONG_DEST; break; case IO_XFER_ERROR_RX_FRAME: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_ERROR_RX_FRAME\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; break; case IO_XFER_OPEN_RETRY_TIMEOUT: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_ERROR_INTERNAL_SMP_RESOURCE: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n")); + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_QUEUE_FULL; break; case IO_PORT_IN_RESET: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_PORT_IN_RESET\n")); + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_DS_NON_OPERATIONAL: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; break; case IO_DS_IN_RECOVERY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_DS_IN_RECOVERY\n")); + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: - PM8001_IO_DBG(pm8001_ha, - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + pm8001_dbg(pm8001_ha, IO, + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown status 0x%x\n", status)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_DEV_NO_RESPONSE; /* not allowed case. Therefore, return failed status */ @@ -3121,10 +2997,8 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&t->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with" - " io_status 0x%x resp 0x%x " - "stat 0x%x but aborted by upper layer!\n", - t, status, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else { spin_unlock_irqrestore(&t->task_state_lock, flags); @@ -3146,9 +3020,8 @@ void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, u32 device_id = le32_to_cpu(pPayload->device_id); u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS; u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS; - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state " - "from 0x%x to 0x%x status = 0x%x!\n", - device_id, pds, nds, status)); + pm8001_dbg(pm8001_ha, MSG, "Set device id = 0x%x state from 0x%x to 0x%x status = 0x%x!\n", + device_id, pds, nds, status); complete(pm8001_dev->setds_completion); ccb->task = NULL; ccb->ccb_tag = 0xFFFFFFFF; @@ -3163,10 +3036,9 @@ void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag]; u32 dlen_status = le32_to_cpu(pPayload->dlen_status); complete(pm8001_ha->nvmd_completion); - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n")); + pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n"); if ((dlen_status & NVMD_STAT) != 0) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Set nvm data error!\n")); + pm8001_dbg(pm8001_ha, FAIL, "Set nvm data error!\n"); return; } ccb->task = NULL; @@ -3188,26 +3060,22 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr; fw_control_context = ccb->fw_control_context; - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n")); + pm8001_dbg(pm8001_ha, MSG, "Get nvm data complete!\n"); if ((dlen_status & NVMD_STAT) != 0) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("Get nvm data error!\n")); + pm8001_dbg(pm8001_ha, FAIL, "Get nvm data error!\n"); complete(pm8001_ha->nvmd_completion); return; } if (ir_tds_bn_dps_das_nvm & IPMode) { /* indirect mode - IR bit set */ - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("Get NVMD success, IR=1\n")); + pm8001_dbg(pm8001_ha, MSG, "Get NVMD success, IR=1\n"); if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) { if (ir_tds_bn_dps_das_nvm == 0x80a80200) { memcpy(pm8001_ha->sas_addr, ((u8 *)virt_addr + 4), SAS_ADDR_SIZE); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("Get SAS address" - " from VPD successfully!\n")); + pm8001_dbg(pm8001_ha, MSG, "Get SAS address from VPD successfully!\n"); } } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM) || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) || @@ -3218,14 +3086,14 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) ; } else { /* Should not be happened*/ - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("(IR=1)Wrong Device type 0x%x\n", - ir_tds_bn_dps_das_nvm)); + pm8001_dbg(pm8001_ha, MSG, + "(IR=1)Wrong Device type 0x%x\n", + ir_tds_bn_dps_das_nvm); } } else /* direct mode */{ - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n", - (dlen_status & NVMD_LEN) >> 24)); + pm8001_dbg(pm8001_ha, MSG, + "Get NVMD success, IR=0, dataLen=%d\n", + (dlen_status & NVMD_LEN) >> 24); } /* Though fw_control_context is freed below, usrAddr still needs * to be updated as this holds the response to the request function @@ -3234,10 +3102,15 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_ha->memoryMap.region[NVMD].virt_ptr, fw_control_context->len); kfree(ccb->fw_control_context); + /* To avoid race condition, complete should be + * called after the message is copied to + * fw_control_context->usrAddr + */ + complete(pm8001_ha->nvmd_completion); + pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n"); ccb->task = NULL; ccb->ccb_tag = 0xFFFFFFFF; pm8001_tag_free(pm8001_ha, tag); - complete(pm8001_ha->nvmd_completion); } int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) @@ -3250,13 +3123,13 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS; tag = le32_to_cpu(pPayload->tag); if (status != 0) { - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("%x phy execute %x phy op failed!\n", - phy_id, phy_op)); + pm8001_dbg(pm8001_ha, MSG, + "%x phy execute %x phy op failed!\n", + phy_id, phy_op); } else { - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("%x phy execute %x phy op success!\n", - phy_id, phy_op)); + pm8001_dbg(pm8001_ha, MSG, + "%x phy execute %x phy op success!\n", + phy_id, phy_op); pm8001_ha->phy[phy_id].reset_success = true; } if (pm8001_ha->phy[phy_id].enable_completion) { @@ -3303,7 +3176,7 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i) } else if (phy->phy_type & PORT_TYPE_SATA) { /*Nothing*/ } - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i)); + pm8001_dbg(pm8001_ha, MSG, "phy %d byte dmaded.\n", i); sas_phy->frame_rcvd_size = phy->frame_rcvd_size; pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED); @@ -3426,37 +3299,34 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; phy->phy_state = PHY_STATE_LINK_UP_SPC; - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", - port_id, phy_id)); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", + port_id, phy_id); switch (deviceType) { case SAS_PHY_UNUSED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("device type no device.\n")); + pm8001_dbg(pm8001_ha, MSG, "device type no device.\n"); break; case SAS_END_DEVICE: - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); + pm8001_dbg(pm8001_ha, MSG, "end device.\n"); pm8001_chip_phy_ctl_req(pm8001_ha, phy_id, PHY_NOTIFY_ENABLE_SPINUP); port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); break; case SAS_EDGE_EXPANDER_DEVICE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("expander device.\n")); + pm8001_dbg(pm8001_ha, MSG, "expander device.\n"); port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); break; case SAS_FANOUT_EXPANDER_DEVICE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("fanout expander device.\n")); + pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n"); port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("unknown device type(%x)\n", deviceType)); + pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n", + deviceType); break; } phy->phy_type |= PORT_TYPE_SAS; @@ -3502,9 +3372,8 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," - " phy id = %d\n", port_id, phy_id)); + pm8001_dbg(pm8001_ha, DEVIO, "HW_EVENT_SATA_PHY_UP port id = %d, phy id = %d\n", + port_id, phy_id); port->port_state = portstate; phy->phy_state = PHY_STATE_LINK_UP_SPC; port->port_attached = 1; @@ -3552,37 +3421,35 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) case PORT_VALID: break; case PORT_INVALID: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" PortInvalid portID %d\n", port_id)); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" Last phy Down and port invalid\n")); + pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n", + port_id); + pm8001_dbg(pm8001_ha, MSG, + " Last phy Down and port invalid\n"); port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; case PORT_IN_RESET: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" Port In Reset portID %d\n", port_id)); + pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n", + port_id); break; case PORT_NOT_ESTABLISHED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n")); + pm8001_dbg(pm8001_ha, MSG, + " phy Down and PORT_NOT_ESTABLISHED\n"); port->port_attached = 0; break; case PORT_LOSTCOMM: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" phy Down and PORT_LOSTCOMM\n")); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" Last phy Down and port invalid\n")); + pm8001_dbg(pm8001_ha, MSG, " phy Down and PORT_LOSTCOMM\n"); + pm8001_dbg(pm8001_ha, MSG, + " Last phy Down and port invalid\n"); port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; default: port->port_attached = 0; - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk(" phy Down and(default) = %x\n", - portstate)); + pm8001_dbg(pm8001_ha, DEVIO, " phy Down and(default) = %x\n", + portstate); break; } @@ -3613,44 +3480,42 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_dev = ccb->device; status = le32_to_cpu(registerRespPayload->status); device_id = le32_to_cpu(registerRespPayload->device_id); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" register device is status = %d\n", status)); + pm8001_dbg(pm8001_ha, MSG, " register device is status = %d\n", + status); switch (status) { case DEVREG_SUCCESS: - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n")); + pm8001_dbg(pm8001_ha, MSG, "DEVREG_SUCCESS\n"); pm8001_dev->device_id = device_id; break; case DEVREG_FAILURE_OUT_OF_RESOURCE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n")); + pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_OUT_OF_RESOURCE\n"); break; case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"); break; case DEVREG_FAILURE_INVALID_PHY_ID: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n")); + pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_INVALID_PHY_ID\n"); break; case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"); break; case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"); break; case DEVREG_FAILURE_PORT_NOT_VALID_STATE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"); break; case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"); break; default: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, MSG, + "DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n"); break; } complete(pm8001_dev->dcompletion); @@ -3670,9 +3535,9 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) status = le32_to_cpu(registerRespPayload->status); device_id = le32_to_cpu(registerRespPayload->device_id); if (status != 0) - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" deregister device failed ,status = %x" - ", device_id = %x\n", status, device_id)); + pm8001_dbg(pm8001_ha, MSG, + " deregister device failed ,status = %x, device_id = %x\n", + status, device_id); return 0; } @@ -3692,44 +3557,37 @@ int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, status = le32_to_cpu(ppayload->status); switch (status) { case FLASH_UPDATE_COMPLETE_PENDING_REBOOT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n")); + pm8001_dbg(pm8001_ha, MSG, + ": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"); break; case FLASH_UPDATE_IN_PROGRESS: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_IN_PROGRESS\n"); break; case FLASH_UPDATE_HDR_ERR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_HDR_ERR\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HDR_ERR\n"); break; case FLASH_UPDATE_OFFSET_ERR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_OFFSET_ERR\n"); break; case FLASH_UPDATE_CRC_ERR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_CRC_ERR\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_CRC_ERR\n"); break; case FLASH_UPDATE_LENGTH_ERR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_LENGTH_ERR\n"); break; case FLASH_UPDATE_HW_ERR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_HW_ERR\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HW_ERR\n"); break; case FLASH_UPDATE_DNLD_NOT_SUPPORTED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n")); + pm8001_dbg(pm8001_ha, MSG, + ": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"); break; case FLASH_UPDATE_DISABLED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(": FLASH_UPDATE_DISABLED\n")); + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_DISABLED\n"); break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("No matched status = %d\n", status)); + pm8001_dbg(pm8001_ha, DEVIO, "No matched status = %d\n", + status); break; } kfree(ccb->fw_control_context); @@ -3747,12 +3605,11 @@ int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb) struct general_event_resp *pPayload = (struct general_event_resp *)(piomb + 4); status = le32_to_cpu(pPayload->status); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" status = 0x%x\n", status)); + pm8001_dbg(pm8001_ha, MSG, " status = 0x%x\n", status); for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++) - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i, - pPayload->inb_IOMB_payload[i])); + pm8001_dbg(pm8001_ha, MSG, "inb_IOMB_payload[0x%x] 0x%x,\n", + i, + pPayload->inb_IOMB_payload[i]); return 0; } @@ -3772,8 +3629,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) status = le32_to_cpu(pPayload->status); tag = le32_to_cpu(pPayload->tag); if (!tag) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk(" TAG NULL. RETURNING !!!")); + pm8001_dbg(pm8001_ha, FAIL, " TAG NULL. RETURNING !!!\n"); return -1; } @@ -3783,23 +3639,21 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_dev = ccb->device; /* retrieve device */ if (!t) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk(" TASK NULL. RETURNING !!!")); + pm8001_dbg(pm8001_ha, FAIL, " TASK NULL. RETURNING !!!\n"); return -1; } ts = &t->task_status; if (status != 0) - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task abort failed status 0x%x ," - "tag = 0x%x, scp= 0x%x\n", status, tag, scp)); + pm8001_dbg(pm8001_ha, FAIL, "task abort failed status 0x%x ,tag = 0x%x, scp= 0x%x\n", + status, tag, scp); switch (status) { case IO_SUCCESS: - PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); + pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n"); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_GOOD; break; case IO_NOT_VALID: - PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n")); + pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n"); ts->resp = TMF_RESP_FUNC_FAILED; break; } @@ -3844,14 +3698,13 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n", - port_id, phy_id, eventType, status)); + pm8001_dbg(pm8001_ha, DEVIO, + "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n", + port_id, phy_id, eventType, status); switch (eventType) { case HW_EVENT_PHY_START_STATUS: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PHY_START_STATUS" - " status = %x\n", status)); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n", + status); if (status == 0) { phy->phy_state = 1; if (pm8001_ha->flags == PM8001F_RUN_TIME && @@ -3860,38 +3713,32 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) } break; case HW_EVENT_SAS_PHY_UP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PHY_START_STATUS\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n"); hw_event_sas_phy_up(pm8001_ha, piomb); break; case HW_EVENT_SATA_PHY_UP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SATA_PHY_UP\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n"); hw_event_sata_phy_up(pm8001_ha, piomb); break; case HW_EVENT_PHY_STOP_STATUS: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PHY_STOP_STATUS " - "status = %x\n", status)); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_STOP_STATUS status = %x\n", + status); if (status == 0) phy->phy_state = 0; break; case HW_EVENT_SATA_SPINUP_HOLD: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n"); sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); break; case HW_EVENT_PHY_DOWN: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PHY_DOWN\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n"); sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); phy->phy_attached = 0; phy->phy_state = 0; hw_event_phy_down(pm8001_ha, piomb); break; case HW_EVENT_PORT_INVALID: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PORT_INVALID\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n"); sas_phy_disconnected(sas_phy); phy->phy_attached = 0; sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); @@ -3899,8 +3746,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) /* the broadcast change primitive received, tell the LIBSAS this event to revalidate the sas domain*/ case HW_EVENT_BROADCAST_CHANGE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE, port_id, phy_id, 1, 0); spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); @@ -3909,23 +3755,21 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); break; case HW_EVENT_PHY_ERROR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PHY_ERROR\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n"); sas_phy_disconnected(&phy->sas_phy); phy->phy_attached = 0; sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); break; case HW_EVENT_BROADCAST_EXP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_BROADCAST_EXP\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n"); spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP; spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); break; case HW_EVENT_LINK_ERR_INVALID_DWORD: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_LINK_ERR_INVALID_DWORD\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0); sas_phy_disconnected(sas_phy); @@ -3933,8 +3777,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_LINK_ERR_DISPARITY_ERROR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_LINK_ERR_DISPARITY_ERROR, port_id, phy_id, 0, 0); @@ -3943,8 +3787,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_LINK_ERR_CODE_VIOLATION: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_LINK_ERR_CODE_VIOLATION\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_LINK_ERR_CODE_VIOLATION, port_id, phy_id, 0, 0); @@ -3953,8 +3797,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH, port_id, phy_id, 0, 0); @@ -3963,39 +3807,34 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_MALFUNCTION: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_MALFUNCTION\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n"); break; case HW_EVENT_BROADCAST_SES: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_BROADCAST_SES\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n"); spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); sas_phy->sas_prim = HW_EVENT_BROADCAST_SES; spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); break; case HW_EVENT_INBOUND_CRC_ERROR: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_INBOUND_CRC_ERROR, port_id, phy_id, 0, 0); break; case HW_EVENT_HARD_RESET_RECEIVED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n"); sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); break; case HW_EVENT_ID_FRAME_TIMEOUT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n"); sas_phy_disconnected(sas_phy); phy->phy_attached = 0; sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_LINK_ERR_PHY_RESET_FAILED: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"); pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_LINK_ERR_PHY_RESET_FAILED, port_id, phy_id, 0, 0); @@ -4004,34 +3843,30 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_PORT_RESET_TIMER_TMO: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n"); sas_phy_disconnected(sas_phy); phy->phy_attached = 0; sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_PORT_RECOVERY_TIMER_TMO: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n")); + pm8001_dbg(pm8001_ha, MSG, + "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"); sas_phy_disconnected(sas_phy); phy->phy_attached = 0; sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); break; case HW_EVENT_PORT_RECOVER: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PORT_RECOVER\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n"); break; case HW_EVENT_PORT_RESET_COMPLETE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n")); + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n"); break; case EVENT_BROADCAST_ASYNCH_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n"); break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown event type = %x\n", eventType)); + pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type = %x\n", + eventType); break; } return 0; @@ -4047,163 +3882,132 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) __le32 pHeader = *(__le32 *)piomb; u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF); - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:")); + pm8001_dbg(pm8001_ha, MSG, "process_one_iomb:\n"); switch (opc) { case OPC_OUB_ECHO: - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n"); break; case OPC_OUB_HW_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_HW_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n"); mpi_hw_event(pm8001_ha, piomb); break; case OPC_OUB_SSP_COMP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SSP_COMP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n"); mpi_ssp_completion(pm8001_ha, piomb); break; case OPC_OUB_SMP_COMP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SMP_COMP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n"); mpi_smp_completion(pm8001_ha, piomb); break; case OPC_OUB_LOCAL_PHY_CNTRL: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n"); pm8001_mpi_local_phy_ctl(pm8001_ha, piomb); break; case OPC_OUB_DEV_REGIST: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_DEV_REGIST\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n"); pm8001_mpi_reg_resp(pm8001_ha, piomb); break; case OPC_OUB_DEREG_DEV: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unregister the device\n")); + pm8001_dbg(pm8001_ha, MSG, "unregister the device\n"); pm8001_mpi_dereg_resp(pm8001_ha, piomb); break; case OPC_OUB_GET_DEV_HANDLE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n"); break; case OPC_OUB_SATA_COMP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SATA_COMP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n"); mpi_sata_completion(pm8001_ha, piomb); break; case OPC_OUB_SATA_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SATA_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n"); mpi_sata_event(pm8001_ha, piomb); break; case OPC_OUB_SSP_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SSP_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n"); mpi_ssp_event(pm8001_ha, piomb); break; case OPC_OUB_DEV_HANDLE_ARRIV: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n"); /*This is for target*/ break; case OPC_OUB_SSP_RECV_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n"); /*This is for target*/ break; case OPC_OUB_DEV_INFO: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_DEV_INFO\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_INFO\n"); break; case OPC_OUB_FW_FLASH_UPDATE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n"); pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb); break; case OPC_OUB_GPIO_RESPONSE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GPIO_RESPONSE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n"); break; case OPC_OUB_GPIO_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GPIO_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n"); break; case OPC_OUB_GENERAL_EVENT: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GENERAL_EVENT\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n"); pm8001_mpi_general_event(pm8001_ha, piomb); break; case OPC_OUB_SSP_ABORT_RSP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n"); pm8001_mpi_task_abort_resp(pm8001_ha, piomb); break; case OPC_OUB_SATA_ABORT_RSP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n"); pm8001_mpi_task_abort_resp(pm8001_ha, piomb); break; case OPC_OUB_SAS_DIAG_MODE_START_END: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n")); + pm8001_dbg(pm8001_ha, MSG, + "OPC_OUB_SAS_DIAG_MODE_START_END\n"); break; case OPC_OUB_SAS_DIAG_EXECUTE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n"); break; case OPC_OUB_GET_TIME_STAMP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GET_TIME_STAMP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n"); break; case OPC_OUB_SAS_HW_EVENT_ACK: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n"); break; case OPC_OUB_PORT_CONTROL: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_PORT_CONTROL\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n"); break; case OPC_OUB_SMP_ABORT_RSP: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n"); pm8001_mpi_task_abort_resp(pm8001_ha, piomb); break; case OPC_OUB_GET_NVMD_DATA: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GET_NVMD_DATA\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n"); pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb); break; case OPC_OUB_SET_NVMD_DATA: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SET_NVMD_DATA\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n"); pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb); break; case OPC_OUB_DEVICE_HANDLE_REMOVAL: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n"); break; case OPC_OUB_SET_DEVICE_STATE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n"); pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb); break; case OPC_OUB_GET_DEVICE_STATE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n"); break; case OPC_OUB_SET_DEV_INFO: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SET_DEV_INFO\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n"); break; case OPC_OUB_SAS_RE_INITIALIZE: - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n")); + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_RE_INITIALIZE\n"); break; default: - PM8001_DEVIO_DBG(pm8001_ha, - pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n", - opc)); + pm8001_dbg(pm8001_ha, DEVIO, + "Unknown outbound Queue IOMB OPC = %x\n", + opc); break; } } @@ -4416,19 +4220,19 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, circularQ = &pm8001_ha->inbnd_q_tbl[0]; if (task->data_dir == DMA_NONE) { ATAP = 0x04; /* no data*/ - PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n")); + pm8001_dbg(pm8001_ha, IO, "no data\n"); } else if (likely(!task->ata_task.device_control_reg_update)) { if (task->ata_task.dma_xfer) { ATAP = 0x06; /* DMA */ - PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n")); + pm8001_dbg(pm8001_ha, IO, "DMA\n"); } else { ATAP = 0x05; /* PIO*/ - PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n")); + pm8001_dbg(pm8001_ha, IO, "PIO\n"); } if (task->ata_task.use_ncq && dev->sata_dev.class != ATA_DEV_ATAPI) { ATAP = 0x07; /* FPDMA */ - PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n")); + pm8001_dbg(pm8001_ha, IO, "FPDMA\n"); } } if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) { @@ -4485,10 +4289,10 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, SAS_TASK_STATE_ABORTED))) { spin_unlock_irqrestore(&task->task_state_lock, flags); - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("task 0x%p resp 0x%x " - " stat 0x%x but aborted by upper layer " - "\n", task, ts->resp, ts->stat)); + pm8001_dbg(pm8001_ha, FAIL, + "task 0x%p resp 0x%x stat 0x%x but aborted by upper layer\n", + task, ts->resp, + ts->stat); pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); } else { spin_unlock_irqrestore(&task->task_state_lock, @@ -4637,8 +4441,8 @@ int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, memset(&payload, 0, sizeof(payload)); payload.tag = cpu_to_le32(1); payload.device_id = cpu_to_le32(device_id); - PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unregister device device_id = %d\n", device_id)); + pm8001_dbg(pm8001_ha, MSG, "unregister device device_id = %d\n", + device_id); ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, sizeof(payload), 0); return ret; @@ -4690,9 +4494,9 @@ static irqreturn_t pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec) { pm8001_chip_interrupt_disable(pm8001_ha, vec); - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "irq vec %d, ODMR:0x%x\n", - vec, pm8001_cr32(pm8001_ha, 0, 0x30))); + pm8001_dbg(pm8001_ha, DEVIO, + "irq vec %d, ODMR:0x%x\n", + vec, pm8001_cr32(pm8001_ha, 0, 0x30)); process_oq(pm8001_ha, vec); pm8001_chip_interrupt_enable(pm8001_ha, vec); return IRQ_HANDLED; @@ -4729,9 +4533,8 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, { u32 opc, device_id; int rc = TMF_RESP_FUNC_FAILED; - PM8001_EH_DBG(pm8001_ha, - pm8001_printk("cmd_tag = %x, abort task tag = 0x%x", - cmd_tag, task_tag)); + pm8001_dbg(pm8001_ha, EH, "cmd_tag = %x, abort task tag = 0x%x\n", + cmd_tag, task_tag); if (pm8001_dev->dev_type == SAS_END_DEVICE) opc = OPC_INB_SSP_ABORT; else if (pm8001_dev->dev_type == SAS_SATA_DEV) @@ -4742,7 +4545,7 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, rc = send_task_abort(pm8001_ha, opc, device_id, flag, task_tag, cmd_tag); if (rc != TMF_RESP_FUNC_COMPLETE) - PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc)); + pm8001_dbg(pm8001_ha, EH, "rc= %d\n", rc); return rc; } @@ -5008,8 +4811,9 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha, if (!fw_control_context) return -ENOMEM; fw_control = (struct fw_control_info *)&ioctl_payload->func_specific; - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( - "dma fw_control context input length :%x\n", fw_control->len)); + pm8001_dbg(pm8001_ha, DEVIO, + "dma fw_control context input length :%x\n", + fw_control->len); memcpy(buffer, fw_control->buffer, fw_control->len); flash_update_info.sgl.addr = cpu_to_le64(phys_addr); flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len); |