diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 124 |
1 files changed, 101 insertions, 23 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 2ac1d21c553f..729d343861f4 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2,7 +2,7 @@ * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term * - * “Broadcom” refers to Broadcom Limited and/or its subsidiaries. * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.broadcom.com * @@ -149,10 +149,14 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, struct lpfc_nvmet_tgtport *tgtp; struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; + struct lpfc_nvme_rport *rport; struct lpfc_nodelist *ndlp; struct nvme_fc_remote_port *nrport; - uint64_t data1, data2, data3, tot; + struct lpfc_nvme_ctrl_stat *cstat; + uint64_t data1, data2, data3; + uint64_t totin, totout, tot; char *statep; + int i; int len = 0; if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) { @@ -293,6 +297,13 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, len = snprintf(buf, PAGE_SIZE, "NVME Initiator Enabled\n"); spin_lock_irq(shost->host_lock); + len += snprintf(buf + len, PAGE_SIZE - len, + "XRI Dist lpfc%d Total %d NVME %d SCSI %d ELS %d\n", + phba->brd_no, + phba->sli4_hba.max_cfg_param.max_xri, + phba->sli4_hba.nvme_xri_max, + phba->sli4_hba.scsi_xri_max, + lpfc_sli4_get_els_iocb_cnt(phba)); /* Port state is only one of two values for now. */ if (localport->port_id) @@ -309,11 +320,14 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, localport->port_id, statep); list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { - if (!ndlp->nrport) + rport = lpfc_ndlp_get_nrport(ndlp); + if (!rport) continue; /* local short-hand pointer. */ - nrport = ndlp->nrport->remoteport; + nrport = rport->remoteport; + if (!nrport) + continue; /* Port state is only one of two values for now. */ switch (nrport->port_state) { @@ -364,11 +378,14 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, } spin_unlock_irq(shost->host_lock); + if (!lport) + return len; + len += snprintf(buf + len, PAGE_SIZE - len, "\nNVME Statistics\n"); len += snprintf(buf+len, PAGE_SIZE-len, "LS: Xmt %010x Cmpl %010x Abort %08x\n", - atomic_read(&phba->fc4NvmeLsRequests), - atomic_read(&phba->fc4NvmeLsCmpls), + atomic_read(&lport->fc4NvmeLsRequests), + atomic_read(&lport->fc4NvmeLsCmpls), atomic_read(&lport->xmt_ls_abort)); len += snprintf(buf + len, PAGE_SIZE - len, @@ -377,28 +394,33 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, atomic_read(&lport->cmpl_ls_xb), atomic_read(&lport->cmpl_ls_err)); - tot = atomic_read(&phba->fc4NvmeIoCmpls); - data1 = atomic_read(&phba->fc4NvmeInputRequests); - data2 = atomic_read(&phba->fc4NvmeOutputRequests); - data3 = atomic_read(&phba->fc4NvmeControlRequests); + totin = 0; + totout = 0; + for (i = 0; i < phba->cfg_nvme_io_channel; i++) { + cstat = &lport->cstat[i]; + tot = atomic_read(&cstat->fc4NvmeIoCmpls); + totin += tot; + data1 = atomic_read(&cstat->fc4NvmeInputRequests); + data2 = atomic_read(&cstat->fc4NvmeOutputRequests); + data3 = atomic_read(&cstat->fc4NvmeControlRequests); + totout += (data1 + data2 + data3); + } len += snprintf(buf+len, PAGE_SIZE-len, - "FCP: Rd %016llx Wr %016llx IO %016llx\n", - data1, data2, data3); + "Total FCP Cmpl %016llx Issue %016llx " + "OutIO %016llx\n", + totin, totout, totout - totin); len += snprintf(buf+len, PAGE_SIZE-len, - " noxri %08x nondlp %08x qdepth %08x " - "wqerr %08x\n", + " abort %08x noxri %08x nondlp %08x qdepth %08x " + "wqerr %08x err %08x\n", + atomic_read(&lport->xmt_fcp_abort), atomic_read(&lport->xmt_fcp_noxri), atomic_read(&lport->xmt_fcp_bad_ndlp), atomic_read(&lport->xmt_fcp_qdepth), + atomic_read(&lport->xmt_fcp_err), atomic_read(&lport->xmt_fcp_wqerr)); len += snprintf(buf + len, PAGE_SIZE - len, - " Cmpl %016llx Outstanding %016llx Abort %08x\n", - tot, ((data1 + data2 + data3) - tot), - atomic_read(&lport->xmt_fcp_abort)); - - len += snprintf(buf + len, PAGE_SIZE - len, "FCP CMPL: xb %08x Err %08x\n", atomic_read(&lport->cmpl_fcp_xb), atomic_read(&lport->cmpl_fcp_err)); @@ -3280,6 +3302,9 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) { struct Scsi_Host *shost; struct lpfc_nodelist *ndlp; +#if (IS_ENABLED(CONFIG_NVME_FC)) + struct lpfc_nvme_rport *rport; +#endif shost = lpfc_shost_from_vport(vport); spin_lock_irq(shost->host_lock); @@ -3289,8 +3314,9 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) if (ndlp->rport) ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo; #if (IS_ENABLED(CONFIG_NVME_FC)) - if (ndlp->nrport) - nvme_fc_set_remoteport_devloss(ndlp->nrport->remoteport, + rport = lpfc_ndlp_get_nrport(ndlp); + if (rport) + nvme_fc_set_remoteport_devloss(rport->remoteport, vport->cfg_devloss_tmo); #endif } @@ -3414,6 +3440,15 @@ LPFC_ATTR_R(nvmet_mrq, "Specify number of RQ pairs for processing NVMET cmds"); /* + * lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post + * to each NVMET RQ. Range 64 to 2048, default is 512. + */ +LPFC_ATTR_R(nvmet_mrq_post, + LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST, + LPFC_NVMET_RQE_DEF_COUNT, + "Specify number of RQ buffers to initially post"); + +/* * lpfc_enable_fc4_type: Defines what FC4 types are supported. * Supported Values: 1 - register just FCP * 3 - register both FCP and NVME @@ -3469,8 +3504,49 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512, # tgt_queue_depth: This parameter is used to limit the number of outstanding # commands per target port. Value range is [10,65535]. Default value is 65535. */ -LPFC_VPORT_ATTR_RW(tgt_queue_depth, 65535, 10, 65535, - "Max number of FCP commands we can queue to a specific target port"); +static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH; +module_param(lpfc_tgt_queue_depth, uint, 0444); +MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth"); +lpfc_vport_param_show(tgt_queue_depth); +lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH, + LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH); + +/** + * lpfc_tgt_queue_depth_store: Sets an attribute value. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Description: Sets the parameter to the new value. + * + * Returns: + * zero on success + * -EINVAL if val is invalid + */ +static int +lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + + if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH)) + return -EINVAL; + + if (val == vport->cfg_tgt_queue_depth) + return 0; + + spin_lock_irq(shost->host_lock); + vport->cfg_tgt_queue_depth = val; + + /* Next loop thru nodelist and change cmd_qdepth */ + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) + ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; + + spin_unlock_irq(shost->host_lock); + return 0; +} + +lpfc_vport_param_store(tgt_queue_depth); +static DEVICE_ATTR_RW(lpfc_tgt_queue_depth); /* # hba_queue_depth: This parameter is used to limit the number of outstanding @@ -5302,6 +5378,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_suppress_rsp, &dev_attr_lpfc_nvme_io_channel, &dev_attr_lpfc_nvmet_mrq, + &dev_attr_lpfc_nvmet_mrq_post, &dev_attr_lpfc_nvme_enable_fb, &dev_attr_lpfc_nvmet_fb_size, &dev_attr_lpfc_enable_bg, @@ -6352,6 +6429,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type); lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq); + lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post); /* Initialize first burst. Target vs Initiator are different. */ lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb); |