diff options
Diffstat (limited to 'drivers/phy/qualcomm')
| -rw-r--r-- | drivers/phy/qualcomm/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 287 |
3 files changed, 298 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index b86f9556df85..ca9ce7e84a5c 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -92,6 +92,16 @@ config PHY_QCOM_USB_HS Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. +config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS Femto phy on Qualcomm + chipsets. This PHY has differences in the register map compared + to the V1 variants. The PHY is paired with a Synopsys DWC3 USB + controller on Qualcomm SOCs. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 41746781de73..86fb32efab79 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o +obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c new file mode 100644 index 000000000000..4d74045271eb --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NORMAL (0x00) +#define OPMODE_NONDRIVING BIT(3) +#define TERMSEL BIT(5) + +#define USB2_PHY_USB_PHY_UTMI_CTRL1 (0x40) +#define XCVRSEL BIT(0) + +#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(7, 5) +#define FSEL_DEFAULT (0x3 << 4) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58) +#define VBUSVLDEXTSEL0 BIT(4) +#define PLLBTUNE BIT(5) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c) +#define VREGBYPASS BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60) +#define VBUSVLDEXT0 BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_AUTO_RESUME BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB2_PHY_USB_PHY_CFG0 (0x94) +#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0) +#define REFCLK_SEL_MASK GENMASK(1, 0) +#define REFCLK_SEL_DEFAULT (0x2 << 0) + +static const char * const qcom_snps_hsphy_vreg_names[] = { + "vdda-pll", "vdda33", "vdda18", +}; + +#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names) + +/** + * struct qcom_snps_hsphy - snps hs phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for snps hs phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @ref_clk: phy reference clock + * @iface_clk: phy interface clock + * @phy_reset: phy reset control + * @vregs: regulator supplies bulk data + * @phy_initialized: if PHY has been initialized correctly + */ +struct qcom_snps_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct reset_control *phy_reset; + struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS]; + + bool phy_initialized; +}; + +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static int qcom_snps_hsphy_init(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + int ret; + + dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); + + ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + if (ret) + return ret; + + ret = clk_prepare_enable(hsphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto poweroff_phy; + } + + ret = reset_control_assert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + usleep_range(100, 150); + + ret = reset_control_deassert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, POR); + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, 0); + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + PLLBTUNE, PLLBTUNE); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL, + REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, + VBUSVLDEXT0, VBUSVLDEXT0); + + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, + VREGBYPASS, VREGBYPASS); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0, + SLEEPM, SLEEPM); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + + hsphy->phy_initialized = true; + + return 0; + +disable_ahb_clk: + clk_disable_unprepare(hsphy->cfg_ahb_clk); +poweroff_phy: + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + + return ret; +} + +static int qcom_snps_hsphy_exit(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + + reset_control_assert(hsphy->phy_reset); + clk_disable_unprepare(hsphy->cfg_ahb_clk); + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + hsphy->phy_initialized = false; + + return 0; +} + +static const struct phy_ops qcom_snps_hsphy_gen_ops = { + .init = qcom_snps_hsphy_init, + .exit = qcom_snps_hsphy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { + { .compatible = "qcom,sm8150-usb-hs-phy", }, + { .compatible = "qcom,usb-snps-hs-7nm-phy", }, + { .compatible = "qcom,usb-snps-femto-v2-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table); + +static int qcom_snps_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_snps_hsphy *hsphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret, i; + int num; + + hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL); + if (!hsphy) + return -ENOMEM; + + hsphy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(hsphy->base)) + return PTR_ERR(hsphy->base); + + hsphy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(hsphy->ref_clk)) { + ret = PTR_ERR(hsphy->ref_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get ref clk, %d\n", ret); + return ret; + } + + hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(hsphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(hsphy->phy_reset); + } + + num = ARRAY_SIZE(hsphy->vregs); + for (i = 0; i < num; i++) + hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, hsphy->vregs); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get regulator supplies: %d\n", + ret); + return ret; + } + + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create phy, %d\n", ret); + return ret; + } + hsphy->phy = generic_phy; + + dev_set_drvdata(dev, hsphy); + phy_set_drvdata(generic_phy, hsphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_dbg(dev, "Registered Qcom-SNPS HS phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qcom_snps_hsphy_driver = { + .probe = qcom_snps_hsphy_probe, + .driver = { + .name = "qcom-snps-hs-femto-v2-phy", + .of_match_table = qcom_snps_hsphy_of_match_table, + }, +}; + +module_platform_driver(qcom_snps_hsphy_driver); + +MODULE_DESCRIPTION("Qualcomm SNPS FEMTO USB HS PHY V2 driver"); +MODULE_LICENSE("GPL v2"); |