diff options
Diffstat (limited to 'drivers/net/ethernet/micrel/ksz884x.c')
| -rw-r--r-- | drivers/net/ethernet/micrel/ksz884x.c | 111 |
1 files changed, 18 insertions, 93 deletions
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index 9ed264ed7070..7945eb5e2fe8 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -25,6 +25,7 @@ #include <linux/crc32.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/micrel_phy.h> /* DMA Registers */ @@ -271,84 +272,15 @@ #define KS884X_PHY_CTRL_OFFSET 0x00 -/* Mode Control Register */ -#define PHY_REG_CTRL 0 - -#define PHY_RESET 0x8000 -#define PHY_LOOPBACK 0x4000 -#define PHY_SPEED_100MBIT 0x2000 -#define PHY_AUTO_NEG_ENABLE 0x1000 -#define PHY_POWER_DOWN 0x0800 -#define PHY_MII_DISABLE 0x0400 -#define PHY_AUTO_NEG_RESTART 0x0200 -#define PHY_FULL_DUPLEX 0x0100 -#define PHY_COLLISION_TEST 0x0080 -#define PHY_HP_MDIX 0x0020 -#define PHY_FORCE_MDIX 0x0010 -#define PHY_AUTO_MDIX_DISABLE 0x0008 -#define PHY_REMOTE_FAULT_DISABLE 0x0004 -#define PHY_TRANSMIT_DISABLE 0x0002 -#define PHY_LED_DISABLE 0x0001 - #define KS884X_PHY_STATUS_OFFSET 0x02 -/* Mode Status Register */ -#define PHY_REG_STATUS 1 - -#define PHY_100BT4_CAPABLE 0x8000 -#define PHY_100BTX_FD_CAPABLE 0x4000 -#define PHY_100BTX_CAPABLE 0x2000 -#define PHY_10BT_FD_CAPABLE 0x1000 -#define PHY_10BT_CAPABLE 0x0800 -#define PHY_MII_SUPPRESS_CAPABLE 0x0040 -#define PHY_AUTO_NEG_ACKNOWLEDGE 0x0020 -#define PHY_REMOTE_FAULT 0x0010 -#define PHY_AUTO_NEG_CAPABLE 0x0008 -#define PHY_LINK_STATUS 0x0004 -#define PHY_JABBER_DETECT 0x0002 -#define PHY_EXTENDED_CAPABILITY 0x0001 - #define KS884X_PHY_ID_1_OFFSET 0x04 #define KS884X_PHY_ID_2_OFFSET 0x06 -/* PHY Identifier Registers */ -#define PHY_REG_ID_1 2 -#define PHY_REG_ID_2 3 - #define KS884X_PHY_AUTO_NEG_OFFSET 0x08 -/* Auto-Negotiation Advertisement Register */ -#define PHY_REG_AUTO_NEGOTIATION 4 - -#define PHY_AUTO_NEG_NEXT_PAGE 0x8000 -#define PHY_AUTO_NEG_REMOTE_FAULT 0x2000 -/* Not supported. */ -#define PHY_AUTO_NEG_ASYM_PAUSE 0x0800 -#define PHY_AUTO_NEG_SYM_PAUSE 0x0400 -#define PHY_AUTO_NEG_100BT4 0x0200 -#define PHY_AUTO_NEG_100BTX_FD 0x0100 -#define PHY_AUTO_NEG_100BTX 0x0080 -#define PHY_AUTO_NEG_10BT_FD 0x0040 -#define PHY_AUTO_NEG_10BT 0x0020 -#define PHY_AUTO_NEG_SELECTOR 0x001F -#define PHY_AUTO_NEG_802_3 0x0001 - -#define PHY_AUTO_NEG_PAUSE (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE) - #define KS884X_PHY_REMOTE_CAP_OFFSET 0x0A -/* Auto-Negotiation Link Partner Ability Register */ -#define PHY_REG_REMOTE_CAPABILITY 5 - -#define PHY_REMOTE_NEXT_PAGE 0x8000 -#define PHY_REMOTE_ACKNOWLEDGE 0x4000 -#define PHY_REMOTE_REMOTE_FAULT 0x2000 -#define PHY_REMOTE_SYM_PAUSE 0x0400 -#define PHY_REMOTE_100BTX_FD 0x0100 -#define PHY_REMOTE_100BTX 0x0080 -#define PHY_REMOTE_10BT_FD 0x0040 -#define PHY_REMOTE_10BT 0x0020 - /* P1VCT */ #define KS884X_P1VCT_P 0x04F0 #define KS884X_P1PHYCTRL_P 0x04F2 @@ -2153,7 +2085,7 @@ static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent) } /** - * sw_get_board_storm - get broadcast storm threshold + * sw_get_broad_storm - get broadcast storm threshold * @hw: The hardware instance. * @percent: Buffer to store the broadcast storm threshold percentage. * @@ -2886,15 +2818,6 @@ static void sw_block_addr(struct ksz_hw *hw) } } -#define PHY_LINK_SUPPORT \ - (PHY_AUTO_NEG_ASYM_PAUSE | \ - PHY_AUTO_NEG_SYM_PAUSE | \ - PHY_AUTO_NEG_100BT4 | \ - PHY_AUTO_NEG_100BTX_FD | \ - PHY_AUTO_NEG_100BTX | \ - PHY_AUTO_NEG_10BT_FD | \ - PHY_AUTO_NEG_10BT) - static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data) { *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET); @@ -2973,7 +2896,7 @@ static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val) } /** - * port_w_phy - write data to PHY register + * hw_w_phy - write data to PHY register * @hw: The hardware instance. * @port: Port to write. * @reg: PHY register to write. @@ -3238,16 +3161,18 @@ static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port, rx = tx = 0; if (port->force_link) rx = tx = 1; - if (remote & PHY_AUTO_NEG_SYM_PAUSE) { - if (local & PHY_AUTO_NEG_SYM_PAUSE) { + if (remote & LPA_PAUSE_CAP) { + if (local & ADVERTISE_PAUSE_CAP) { rx = tx = 1; - } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) && - (local & PHY_AUTO_NEG_PAUSE) == - PHY_AUTO_NEG_ASYM_PAUSE) { + } else if ((remote & LPA_PAUSE_ASYM) && + (local & + (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) == + ADVERTISE_PAUSE_ASYM) { tx = 1; } - } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) { - if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE) + } else if (remote & LPA_PAUSE_ASYM) { + if ((local & (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) + == (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) rx = 1; } if (!hw->ksz_switch) @@ -3428,16 +3353,16 @@ static void port_force_link_speed(struct ksz_port *port) phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL; hw_r_phy_ctrl(hw, phy, &data); - data &= ~PHY_AUTO_NEG_ENABLE; + data &= ~BMCR_ANENABLE; if (10 == port->speed) - data &= ~PHY_SPEED_100MBIT; + data &= ~BMCR_SPEED100; else if (100 == port->speed) - data |= PHY_SPEED_100MBIT; + data |= BMCR_SPEED100; if (1 == port->duplex) - data &= ~PHY_FULL_DUPLEX; + data &= ~BMCR_FULLDPLX; else if (2 == port->duplex) - data |= PHY_FULL_DUPLEX; + data |= BMCR_FULLDPLX; hw_w_phy_ctrl(hw, phy, data); } } @@ -4782,7 +4707,7 @@ static void transmit_cleanup(struct dev_info *hw_priv, int normal) } /** - * transmit_done - transmit done processing + * tx_done - transmit done processing * @hw_priv: Network device. * * This routine is called when the transmit interrupt is triggered, indicating |