summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c202
1 files changed, 35 insertions, 167 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index dd7062fed61a..a39afcf03e2c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -44,9 +44,8 @@
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete);
+static void
+ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed);
static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
@@ -109,6 +108,9 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
+ mac->ops.set_rate_select_speed =
+ ixgbe_set_hard_rate_select_speed;
} else {
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
@@ -646,176 +648,32 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
}
/**
- * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_set_hard_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
*
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete)
+ * Set module link speed via RS0/RS1 rate select pins.
+ */
+static void
+ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
{
- s32 status = 0;
- ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- u32 speedcnt = 0;
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- u32 i = 0;
- bool link_up = false;
- bool autoneg = false;
-
- /* Mask off requested but non-supported speeds */
- status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
- &autoneg);
- if (status != 0)
- return status;
-
- speed &= link_speed;
-
- /*
- * Try each speed one by one, highest priority first. We do this in
- * software because 10gb fiber doesn't support speed autonegotiation.
- */
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- speedcnt++;
- highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber:
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- break;
- case ixgbe_media_type_fiber_qsfp:
- /* QSFP module automatically detects MAC link speed */
- break;
- default:
- hw_dbg(hw, "Unexpected media type.\n");
- break;
- }
-
- /* Allow module to change analog characteristics (1G->10G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
-
- /* Flap the tx laser if it has not already been done */
- if (hw->mac.ops.flap_tx_laser)
- hw->mac.ops.flap_tx_laser(hw);
-
- /*
- * Wait for the controller to acquire link. Per IEEE 802.3ap,
- * Section 73.10.2, we may have to wait up to 500ms if KR is
- * attempted. 82599 uses the same timing for 10g SFI.
- */
- for (i = 0; i < 5; i++) {
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
- }
- }
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- speedcnt++;
- if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
- highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber:
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- break;
- case ixgbe_media_type_fiber_qsfp:
- /* QSFP module automatically detects MAC link speed */
- break;
- default:
- hw_dbg(hw, "Unexpected media type.\n");
- break;
- }
-
- /* Allow module to change analog characteristics (10G->1G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_1GB_FULL,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
-
- /* Flap the tx laser if it has not already been done */
- if (hw->mac.ops.flap_tx_laser)
- hw->mac.ops.flap_tx_laser(hw);
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
+ switch (speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ break;
+ default:
+ hw_dbg(hw, "Invalid fixed module speed\n");
+ return;
}
- /*
- * We didn't get link. Configure back to the highest speed we tried,
- * (if there was more than one). We call ourselves back with just the
- * single highest speed that the user requested.
- */
- if (speedcnt > 1)
- status = ixgbe_setup_mac_link_multispeed_fiber(hw,
- highest_link_speed,
- autoneg_wait_to_complete);
-
-out:
- /* Set autoneg_advertised value based on input link speed */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- return status;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
}
/**
@@ -1766,6 +1624,16 @@ s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+ /* also use it for SCTP */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+ break;
+ default:
+ break;
+ }
+
/* store source and destination IP masks (big-enian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_mask->formatted.src_ip[0]);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 07:37:31 +0300