diff options
Diffstat (limited to 'drivers/net/ethernet/i825xx/ether1.c')
| -rw-r--r-- | drivers/net/ethernet/i825xx/ether1.c | 1094 |
1 files changed, 1094 insertions, 0 deletions
diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c new file mode 100644 index 000000000000..42e90a97c7a5 --- /dev/null +++ b/drivers/net/ethernet/i825xx/ether1.c @@ -0,0 +1,1094 @@ +/* + * linux/drivers/acorn/net/ether1.c + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Acorn ether1 driver (82586 chip) for Acorn machines + * + * We basically keep two queues in the cards memory - one for transmit + * and one for receive. Each has a head and a tail. The head is where + * we/the chip adds packets to be transmitted/received, and the tail + * is where the transmitter has got to/where the receiver will stop. + * Both of these queues are circular, and since the chip is running + * all the time, we have to be careful when we modify the pointers etc + * so that the buffer memory contents is valid all the time. + * + * Change log: + * 1.00 RMK Released + * 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now. + * 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready + * 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt. + * Should prevent lockup. + * 1.04 RMK 17/09/1997 Added more info when initialsation of chip goes wrong. + * TDR now only reports failure when chip reports non-zero + * TDR time-distance. + * 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1 + * 1.06 RMK 10/02/2000 Updated for 2.3.43 + * 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8 + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/ecard.h> + +#define __ETHER1_C +#include "ether1.h" + +static unsigned int net_debug = NET_DEBUG; + +#define BUFFER_SIZE 0x10000 +#define TX_AREA_START 0x00100 +#define TX_AREA_END 0x05000 +#define RX_AREA_START 0x05000 +#define RX_AREA_END 0x0fc00 + +static int ether1_open(struct net_device *dev); +static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ether1_interrupt(int irq, void *dev_id); +static int ether1_close(struct net_device *dev); +static void ether1_setmulticastlist(struct net_device *dev); +static void ether1_timeout(struct net_device *dev); + +/* ------------------------------------------------------------------------- */ + +static char version[] __devinitdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n"; + +#define BUS_16 16 +#define BUS_8 8 + +/* ------------------------------------------------------------------------- */ + +#define DISABLEIRQS 1 +#define NORMALIRQS 0 + +#define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs) +#define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs) + +static inline unsigned short +ether1_inw_p (struct net_device *dev, int addr, int svflgs) +{ + unsigned long flags; + unsigned short ret; + + if (svflgs) + local_irq_save (flags); + + writeb(addr >> 12, REG_PAGE); + ret = readw(ETHER1_RAM + ((addr & 4095) << 1)); + if (svflgs) + local_irq_restore (flags); + return ret; +} + +static inline void +ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs) +{ + unsigned long flags; + + if (svflgs) + local_irq_save (flags); + + writeb(addr >> 12, REG_PAGE); + writew(val, ETHER1_RAM + ((addr & 4095) << 1)); + if (svflgs) + local_irq_restore (flags); +} + +/* + * Some inline assembler to allow fast transfers on to/off of the card. + * Since this driver depends on some features presented by the ARM + * specific architecture, and that you can't configure this driver + * without specifiing ARM mode, this is not a problem. + * + * This routine is essentially an optimised memcpy from the card's + * onboard RAM to kernel memory. + */ +static void +ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) +{ + unsigned int page, thislen, offset; + void __iomem *addr; + + offset = start & 4095; + page = start >> 12; + addr = ETHER1_RAM + (offset << 1); + + if (offset + length > 4096) + thislen = 4096 - offset; + else + thislen = length; + + do { + int used; + + writeb(page, REG_PAGE); + length -= thislen; + + __asm__ __volatile__( + "subs %3, %3, #2\n\ + bmi 2f\n\ +1: ldr %0, [%1], #2\n\ + mov %0, %0, lsl #16\n\ + orr %0, %0, %0, lsr #16\n\ + str %0, [%2], #4\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%1], #2\n\ + mov %0, %0, lsl #16\n\ + orr %0, %0, %0, lsr #16\n\ + str %0, [%2], #4\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%1], #2\n\ + mov %0, %0, lsl #16\n\ + orr %0, %0, %0, lsr #16\n\ + str %0, [%2], #4\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%1], #2\n\ + mov %0, %0, lsl #16\n\ + orr %0, %0, %0, lsr #16\n\ + str %0, [%2], #4\n\ + subs %3, %3, #2\n\ + bpl 1b\n\ +2: adds %3, %3, #1\n\ + ldreqb %0, [%1]\n\ + streqb %0, [%2]" + : "=&r" (used), "=&r" (data) + : "r" (addr), "r" (thislen), "1" (data)); + + addr = ETHER1_RAM; + + thislen = length; + if (thislen > 4096) + thislen = 4096; + page++; + } while (thislen); +} + +static void +ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) +{ + unsigned int page, thislen, offset; + void __iomem *addr; + + offset = start & 4095; + page = start >> 12; + addr = ETHER1_RAM + (offset << 1); + + if (offset + length > 4096) + thislen = 4096 - offset; + else + thislen = length; + + do { + int used; + + writeb(page, REG_PAGE); + length -= thislen; + + __asm__ __volatile__( + "subs %3, %3, #2\n\ + bmi 2f\n\ +1: ldr %0, [%2], #4\n\ + strb %0, [%1], #1\n\ + mov %0, %0, lsr #8\n\ + strb %0, [%1], #1\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%2], #4\n\ + strb %0, [%1], #1\n\ + mov %0, %0, lsr #8\n\ + strb %0, [%1], #1\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%2], #4\n\ + strb %0, [%1], #1\n\ + mov %0, %0, lsr #8\n\ + strb %0, [%1], #1\n\ + subs %3, %3, #2\n\ + bmi 2f\n\ + ldr %0, [%2], #4\n\ + strb %0, [%1], #1\n\ + mov %0, %0, lsr #8\n\ + strb %0, [%1], #1\n\ + subs %3, %3, #2\n\ + bpl 1b\n\ +2: adds %3, %3, #1\n\ + ldreqb %0, [%2]\n\ + streqb %0, [%1]" + : "=&r" (used), "=&r" (data) + : "r" (addr), "r" (thislen), "1" (data)); + + addr = ETHER1_RAM; + + thislen = length; + if (thislen > 4096) + thislen = 4096; + page++; + } while (thislen); +} + +static int __devinit +ether1_ramtest(struct net_device *dev, unsigned char byte) +{ + unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL); + int i, ret = BUFFER_SIZE; + int max_errors = 15; + int bad = -1; + int bad_start = 0; + + if (!buffer) + return 1; + + memset (buffer, byte, BUFFER_SIZE); + ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE); + memset (buffer, byte ^ 0xff, BUFFER_SIZE); + ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE); + + for (i = 0; i < BUFFER_SIZE; i++) { + if (buffer[i] != byte) { + if (max_errors >= 0 && bad != buffer[i]) { + if (bad != -1) + printk ("\n"); + printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X", + dev->name, buffer[i], byte, i); + ret = -ENODEV; + max_errors --; + bad = buffer[i]; + bad_start = i; + } + } else { + if (bad != -1) { + if (bad_start == i - 1) + printk ("\n"); + else + printk (" - 0x%04X\n", i - 1); + bad = -1; + } + } + } + + if (bad != -1) + printk (" - 0x%04X\n", BUFFER_SIZE); + kfree (buffer); + + return ret; +} + +static int +ether1_reset (struct net_device *dev) +{ + writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); + return BUS_16; +} + +static int __devinit +ether1_init_2(struct net_device *dev) +{ + int i; + dev->mem_start = 0; + + i = ether1_ramtest (dev, 0x5a); + + if (i > 0) + i = ether1_ramtest (dev, 0x1e); + + if (i <= 0) + return -ENODEV; + + dev->mem_end = i; + return 0; +} + +/* + * These are the structures that are loaded into the ether RAM card to + * initialise the 82586 + */ + +/* at 0x0100 */ +#define NOP_ADDR (TX_AREA_START) +#define NOP_SIZE (0x06) +static nop_t init_nop = { + 0, + CMD_NOP, + NOP_ADDR +}; + +/* at 0x003a */ +#define TDR_ADDR (0x003a) +#define TDR_SIZE (0x08) +static tdr_t init_tdr = { + 0, + CMD_TDR | CMD_INTR, + NOP_ADDR, + 0 +}; + +/* at 0x002e */ +#define MC_ADDR (0x002e) +#define MC_SIZE (0x0c) +static mc_t init_mc = { + 0, + CMD_SETMULTICAST, + TDR_ADDR, + 0, + { { 0, } } +}; + +/* at 0x0022 */ +#define SA_ADDR (0x0022) +#define SA_SIZE (0x0c) +static sa_t init_sa = { + 0, + CMD_SETADDRESS, + MC_ADDR, + { 0, } +}; + +/* at 0x0010 */ +#define CFG_ADDR (0x0010) +#define CFG_SIZE (0x12) +static cfg_t init_cfg = { + 0, + CMD_CONFIG, + SA_ADDR, + 8, + 8, + CFG8_SRDY, + CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6), + 0, + 0x60, + 0, + CFG13_RETRY(15) | CFG13_SLOTH(2), + 0, +}; + +/* at 0x0000 */ +#define SCB_ADDR (0x0000) +#define SCB_SIZE (0x10) +static scb_t init_scb = { + 0, + SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX, + CFG_ADDR, + RX_AREA_START, + 0, + 0, + 0, + 0 +}; + +/* at 0xffee */ +#define ISCP_ADDR (0xffee) +#define ISCP_SIZE (0x08) +static iscp_t init_iscp = { + 1, + SCB_ADDR, + 0x0000, + 0x0000 +}; + +/* at 0xfff6 */ +#define SCP_ADDR (0xfff6) +#define SCP_SIZE (0x0a) +static scp_t init_scp = { + SCP_SY_16BBUS, + { 0, 0 }, + ISCP_ADDR, + 0 +}; + +#define RFD_SIZE (0x16) +static rfd_t init_rfd = { + 0, + 0, + 0, + 0, + { 0, }, + { 0, }, + 0 +}; + +#define RBD_SIZE (0x0a) +static rbd_t init_rbd = { + 0, + 0, + 0, + 0, + ETH_FRAME_LEN + 8 +}; + +#define TX_SIZE (0x08) +#define TBD_SIZE (0x08) + +static int +ether1_init_for_open (struct net_device *dev) +{ + int i, status, addr, next, next2; + int failures = 0; + unsigned long timeout; + + writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); + + for (i = 0; i < 6; i++) + init_sa.sa_addr[i] = dev->dev_addr[i]; + + /* load data structures into ether1 RAM */ + ether1_writebuffer (dev, &init_scp, SCP_ADDR, SCP_SIZE); + ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE); + ether1_writebuffer (dev, &init_scb, SCB_ADDR, SCB_SIZE); + ether1_writebuffer (dev, &init_cfg, CFG_ADDR, CFG_SIZE); + ether1_writebuffer (dev, &init_sa, SA_ADDR, SA_SIZE); + ether1_writebuffer (dev, &init_mc, MC_ADDR, MC_SIZE); + ether1_writebuffer (dev, &init_tdr, TDR_ADDR, TDR_SIZE); + ether1_writebuffer (dev, &init_nop, NOP_ADDR, NOP_SIZE); + + if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) { + printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n", + dev->name); + return 1; + } + + /* + * setup circularly linked list of { rfd, rbd, buffer }, with + * all rfds circularly linked, rbds circularly linked. + * First rfd is linked to scp, first rbd is linked to first + * rfd. Last rbd has a suspend command. + */ + addr = RX_AREA_START; + do { + next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; + next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; + + if (next2 >= RX_AREA_END) { + next = RX_AREA_START; + init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND; + priv(dev)->rx_tail = addr; + } else + init_rfd.rfd_command = 0; + if (addr == RX_AREA_START) + init_rfd.rfd_rbdoffset = addr + RFD_SIZE; + else + init_rfd.rfd_rbdoffset = 0; + init_rfd.rfd_link = next; + init_rbd.rbd_link = next + RFD_SIZE; + init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE; + + ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE); + ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE); + addr = next; + } while (next2 < RX_AREA_END); + + priv(dev)->tx_link = NOP_ADDR; + priv(dev)->tx_head = NOP_ADDR + NOP_SIZE; + priv(dev)->tx_tail = TDR_ADDR; + priv(dev)->rx_head = RX_AREA_START; + + /* release reset & give 586 a prod */ + priv(dev)->resetting = 1; + priv(dev)->initialising = 1; + writeb(CTRL_RST, REG_CONTROL); + writeb(0, REG_CONTROL); + writeb(CTRL_CA, REG_CONTROL); + + /* 586 should now unset iscp.busy */ + timeout = jiffies + HZ/2; + while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) { + if (time_after(jiffies, timeout)) { + printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name); + return 1; + } + } + + /* check status of commands that we issued */ + timeout += HZ/10; + while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS)) + & STAT_COMPLETE) == 0) { + if (time_after(jiffies, timeout)) + break; + } + + if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { + printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status); + printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, + ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); + failures += 1; + } + + timeout += HZ/10; + while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS)) + & STAT_COMPLETE) == 0) { + if (time_after(jiffies, timeout)) + break; + } + + if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { + printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status); + printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, + ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); + failures += 1; + } + + timeout += HZ/10; + while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS)) + & STAT_COMPLETE) == 0) { + if (time_after(jiffies, timeout)) + break; + } + + if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { + printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status); + printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, + ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); + failures += 1; + } + + timeout += HZ; + while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS)) + & STAT_COMPLETE) == 0) { + if (time_after(jiffies, timeout)) + break; + } + + if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { + printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name); + printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, + ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), + ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); + } else { + status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS); + if (status & TDR_XCVRPROB) + printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name); + else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) { +#ifdef FANCY + printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name, + status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10, + (status & TDR_TIME) % 10); +#else + printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name, + status & TDR_SHORT ? "short" : "open", (status & TDR_TIME)); +#endif + } + } + + if (failures) + ether1_reset (dev); + return failures ? 1 : 0; +} + +/* ------------------------------------------------------------------------- */ + +static int +ether1_txalloc (struct net_device *dev, int size) +{ + int start, tail; + + size = (size + 1) & ~1; + tail = priv(dev)->tx_tail; + + if (priv(dev)->tx_head + size > TX_AREA_END) { + if (tail > priv(dev)->tx_head) + return -1; + start = TX_AREA_START; + if (start + size > tail) + return -1; + priv(dev)->tx_head = start + size; + } else { + if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail) + return -1; + start = priv(dev)->tx_head; + priv(dev)->tx_head += size; + } + + return start; +} + +static int +ether1_open (struct net_device *dev) +{ + if (!is_valid_ether_addr(dev->dev_addr)) { + printk(KERN_WARNING "%s: invalid ethernet MAC address\n", + dev->name); + return -EINVAL; + } + + if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev)) + return -EAGAIN; + + if (ether1_init_for_open (dev)) { + free_irq (dev->irq, dev); + return -EAGAIN; + } + + netif_start_queue(dev); + + return 0; +} + +static void +ether1_timeout(struct net_device *dev) +{ + printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n", + dev->name); + printk(KERN_WARNING "%s: resetting device\n", dev->name); + + ether1_reset (dev); + + if (ether1_init_for_open (dev)) + printk (KERN_ERR "%s: unable to restart interface\n", dev->name); + + dev->stats.tx_errors++; + netif_wake_queue(dev); +} + +static int +ether1_sendpacket (struct sk_buff *skb, struct net_device *dev) +{ + int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr; + unsigned long flags; + tx_t tx; + tbd_t tbd; + nop_t nop; + + if (priv(dev)->restart) { + printk(KERN_WARNING "%s: resetting device\n", dev->name); + + ether1_reset(dev); + + if (ether1_init_for_open(dev)) + printk(KERN_ERR "%s: unable to restart interface\n", dev->name); + else + priv(dev)->restart = 0; + } + + if (skb->len < ETH_ZLEN) { + if (skb_padto(skb, ETH_ZLEN)) + goto out; + } + + /* + * insert packet followed by a nop + */ + txaddr = ether1_txalloc (dev, TX_SIZE); + tbdaddr = ether1_txalloc (dev, TBD_SIZE); + dataddr = ether1_txalloc (dev, skb->len); + nopaddr = ether1_txalloc (dev, NOP_SIZE); + + tx.tx_status = 0; + tx.tx_command = CMD_TX | CMD_INTR; + tx.tx_link = nopaddr; + tx.tx_tbdoffset = tbdaddr; + tbd.tbd_opts = TBD_EOL | skb->len; + tbd.tbd_link = I82586_NULL; + tbd.tbd_bufl = dataddr; + tbd.tbd_bufh = 0; + nop.nop_status = 0; + nop.nop_command = CMD_NOP; + nop.nop_link = nopaddr; + + local_irq_save(flags); + ether1_writebuffer (dev, &tx, txaddr, TX_SIZE); + ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE); + ether1_writebuffer (dev, skb->data, dataddr, skb->len); + ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE); + tmp = priv(dev)->tx_link; + priv(dev)->tx_link = nopaddr; + + /* now reset the previous nop pointer */ + ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS); + + local_irq_restore(flags); + + /* handle transmit */ + + /* check to see if we have room for a full sized ether frame */ + tmp = priv(dev)->tx_head; + tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); + priv(dev)->tx_head = tmp; + dev_kfree_skb (skb); + + if (tst == -1) + netif_stop_queue(dev); + + out: + return NETDEV_TX_OK; +} + +static void +ether1_xmit_done (struct net_device *dev) +{ + nop_t nop; + int caddr, tst; + + caddr = priv(dev)->tx_tail; + +again: + ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); + + switch (nop.nop_command & CMD_MASK) { + case CMD_TDR: + /* special case */ + if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) + != (unsigned short)I82586_NULL) { + ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t, + scb_command, NORMALIRQS); + writeb(CTRL_CA, REG_CONTROL); + } + priv(dev)->tx_tail = NOP_ADDR; + return; + + case CMD_NOP: + if (nop.nop_link == caddr) { + if (priv(dev)->initialising == 0) + printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name); + else + priv(dev)->initialising = 0; + return; + } + if (caddr == nop.nop_link) + return; + caddr = nop.nop_link; + goto again; + + case CMD_TX: + if (nop.nop_status & STAT_COMPLETE) + break; + printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name); + priv(dev)->restart = 1; + return; + + default: + printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name, + nop.nop_command & CMD_MASK, caddr); + priv(dev)->restart = 1; + return; + } + + while (nop.nop_status & STAT_COMPLETE) { + if (nop.nop_status & STAT_OK) { + dev->stats.tx_packets++; + dev->stats.collisions += (nop.nop_status & STAT_COLLISIONS); + } else { + dev->stats.tx_errors++; + + if (nop.nop_status & STAT_COLLAFTERTX) + dev->stats.collisions++; + if (nop.nop_status & STAT_NOCARRIER) + dev->stats.tx_carrier_errors++; + if (nop.nop_status & STAT_TXLOSTCTS) + printk (KERN_WARNING "%s: cts lost\n", dev->name); + if (nop.nop_status & STAT_TXSLOWDMA) + dev->stats.tx_fifo_errors++; + if (nop.nop_status & STAT_COLLEXCESSIVE) + dev->stats.collisions += 16; + } + + if (nop.nop_link == caddr) { + printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name); + break; + } + + caddr = nop.nop_link; + ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); + if ((nop.nop_command & CMD_MASK) != CMD_NOP) { + printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name); + break; + } + + if (caddr == nop.nop_link) + break; + + caddr = nop.nop_link; + ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); + if ((nop.nop_command & CMD_MASK) != CMD_TX) { + printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name); + break; + } + } + priv(dev)->tx_tail = caddr; + + caddr = priv(dev)->tx_head; + tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); + priv(dev)->tx_head = caddr; + if (tst != -1) + netif_wake_queue(dev); +} + +static void +ether1_recv_done (struct net_device *dev) +{ + int status; + int nexttail, rbdaddr; + rbd_t rbd; + + do { + status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS); + if ((status & RFD_COMPLETE) == 0) + break; + + rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS); + ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE); + + if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) { + int length = rbd.rbd_status & RBD_ACNT; + struct sk_buff *skb; + + length = (length + 1) & ~1; + skb = dev_alloc_skb (length + 2); + + if (skb) { + skb_reserve (skb, 2); + + ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length); + + skb->protocol = eth_type_trans (skb, dev); + netif_rx (skb); + dev->stats.rx_packets++; + } else + dev->stats.rx_dropped++; + } else { + printk(KERN_WARNING "%s: %s\n", dev->name, + (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid"); + dev->stats.rx_dropped++; + } + + nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS); + /* nexttail should be rx_head */ + if (nexttail != priv(dev)->rx_head) + printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n", + dev->name, nexttail, priv(dev)->rx_head); + ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS); + ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS); + ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS); + ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS); + + priv(dev)->rx_tail = nexttail; + priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS); + } while (1); +} + +static irqreturn_t +ether1_interrupt (int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + int status; + + status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS); + + if (status) { + ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX), + SCB_ADDR, scb_t, scb_command, NORMALIRQS); + writeb(CTRL_CA | CTRL_ACK, REG_CONTROL); + if (status & SCB_STCX) { + ether1_xmit_done (dev); + } + if (status & SCB_STCNA) { + if (priv(dev)->resetting == 0) + printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name); + else + priv(dev)->resetting += 1; + if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) + != (unsigned short)I82586_NULL) { + ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS); + writeb(CTRL_CA, REG_CONTROL); + } + if (priv(dev)->resetting == 2) + priv(dev)->resetting = 0; + } + if (status & SCB_STFR) { + ether1_recv_done (dev); + } + if (status & SCB_STRNR) { + if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) { + printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name); + ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS); + writeb(CTRL_CA, REG_CONTROL); + dev->stats.rx_dropped++; /* we suspended due to lack of buffer space */ + } else + printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name, + ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS)); + printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, + NORMALIRQS)); + } + } else + writeb(CTRL_ACK, REG_CONTROL); + + return IRQ_HANDLED; +} + +static int +ether1_close (struct net_device *dev) +{ + ether1_reset (dev); + + free_irq(dev->irq, dev); + + return 0; +} + +/* + * Set or clear the multicast filter for this adaptor. + * num_addrs == -1 Promiscuous mode, receive all packets. + * num_addrs == 0 Normal mode, clear multicast list. + * num_addrs > 0 Multicast mode, receive normal and MC packets, and do + * best-effort filtering. + */ +static void +ether1_setmulticastlist (struct net_device *dev) +{ +} + +/* ------------------------------------------------------------------------- */ + +static void __devinit ether1_banner(void) +{ + static unsigned int version_printed = 0; + + if (net_debug && version_printed++ == 0) + printk(KERN_INFO "%s", version); +} + +static const struct net_device_ops ether1_netdev_ops = { + .ndo_open = ether1_open, + .ndo_stop = ether1_close, + .ndo_start_xmit = ether1_sendpacket, + .ndo_set_rx_mode = ether1_setmulticastlist, + .ndo_tx_timeout = ether1_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int __devinit +ether1_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct net_device *dev; + int i, ret = 0; + + ether1_banner(); + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + dev = alloc_etherdev(sizeof(struct ether1_priv)); + if (!dev) { + ret = -ENOMEM; + goto release; + } + + SET_NETDEV_DEV(dev, &ec->dev); + + dev->irq = ec->irq; + priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); + if (!priv(dev)->base) { + ret = -ENOMEM; + goto free; + } + + if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) { + ret = -ENODEV; + goto free; + } + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2)); + + if (ether1_init_2(dev)) { + ret = -ENODEV; + goto free; + } + + dev->netdev_ops = ðer1_netdev_ops; + dev->watchdog_timeo = 5 * HZ / 100; + + ret = register_netdev(dev); + if (ret) + goto free; + + printk(KERN_INFO "%s: ether1 in slot %d, %pM\n", + dev->name, ec->slot_no, dev->dev_addr); + + ecard_set_drvdata(ec, dev); + return 0; + + free: + free_netdev(dev); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit ether1_remove(struct expansion_card *ec) +{ + struct net_device *dev = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + + unregister_netdev(dev); + free_netdev(dev); + ecard_release_resources(ec); +} + +static const struct ecard_id ether1_ids[] = { + { MANU_ACORN, PROD_ACORN_ETHER1 }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver ether1_driver = { + .probe = ether1_probe, + .remove = __devexit_p(ether1_remove), + .id_table = ether1_ids, + .drv = { + .name = "ether1", + }, +}; + +static int __init ether1_init(void) +{ + return ecard_register_driver(ðer1_driver); +} + +static void __exit ether1_exit(void) +{ + ecard_remove_driver(ðer1_driver); +} + +module_init(ether1_init); +module_exit(ether1_exit); + +MODULE_LICENSE("GPL"); |