diff options
Diffstat (limited to 'drivers/net/ethernet/cirrus/mac89x0.c')
| -rw-r--r-- | drivers/net/ethernet/cirrus/mac89x0.c | 158 |
1 files changed, 49 insertions, 109 deletions
diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index 977d4c2c759d..3f8fe8fd79cc 100644 --- a/drivers/net/ethernet/cirrus/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c @@ -56,21 +56,11 @@ local_irq_{dis,en}able() */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + static const char version[] = "cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n"; -/* ======================= configure the driver here ======================= */ - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 0 -#endif - -/* ======================= end of configuration ======================= */ - - -/* Always include 'config.h' first in case the user wants to turn on - or override something. */ #include <linux/module.h> /* @@ -93,6 +83,7 @@ static const char version[] = #include <linux/errno.h> #include <linux/init.h> #include <linux/netdevice.h> +#include <linux/platform_device.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/delay.h> @@ -105,24 +96,22 @@ static const char version[] = #include "cs89x0.h" -static unsigned int net_debug = NET_DEBUG; +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "debug message level"); /* Information that need to be kept for each board. */ struct net_local { + int msg_enable; int chip_type; /* one of: CS8900, CS8920, CS8920M */ char chip_revision; /* revision letter of the chip ('A'...) */ int send_cmd; /* the propercommand used to send a packet. */ int rx_mode; int curr_rx_cfg; int send_underrun; /* keep track of how many underruns in a row we get */ - struct sk_buff *skb; }; /* Index to functions, as function prototypes. */ - -#if 0 -extern void reset_chip(struct net_device *dev); -#endif static int net_open(struct net_device *dev); static int net_send_packet(struct sk_buff *skb, struct net_device *dev); static irqreturn_t net_interrupt(int irq, void *dev_id); @@ -132,10 +121,6 @@ static int net_close(struct net_device *dev); static struct net_device_stats *net_get_stats(struct net_device *dev); static int set_mac_address(struct net_device *dev, void *addr); - -/* Example routines you must write ;->. */ -#define tx_done(dev) 1 - /* For reading/writing registers ISA-style */ static inline int readreg_io(struct net_device *dev, int portno) @@ -176,12 +161,10 @@ static const struct net_device_ops mac89x0_netdev_ops = { /* Probe for the CS8900 card in slot E. We won't bother looking anywhere else until we have a really good reason to do so. */ -struct net_device * __init mac89x0_probe(int unit) +static int mac89x0_device_probe(struct platform_device *pdev) { struct net_device *dev; - static int once_is_enough; struct net_local *lp; - static unsigned version_printed; int i, slot; unsigned rev_type = 0; unsigned long ioaddr; @@ -189,21 +172,9 @@ struct net_device * __init mac89x0_probe(int unit) int err = -ENODEV; struct nubus_rsrc *fres; - if (!MACH_IS_MAC) - return ERR_PTR(-ENODEV); - dev = alloc_etherdev(sizeof(struct net_local)); if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - if (once_is_enough) - goto out; - once_is_enough = 1; + return -ENOMEM; /* We might have to parameterize this later */ slot = 0xE; @@ -230,9 +201,13 @@ struct net_device * __init mac89x0_probe(int unit) if (sig != swab16(CHIP_EISA_ID_SIG)) goto out; + SET_NETDEV_DEV(dev, &pdev->dev); + /* Initialize the net_device structure. */ lp = netdev_priv(dev); + lp->msg_enable = netif_msg_init(debug, 0); + /* Fill in the 'dev' fields. */ dev->base_addr = ioaddr; dev->mem_start = (unsigned long) @@ -255,19 +230,16 @@ struct net_device * __init mac89x0_probe(int unit) if (lp->chip_type != CS8900 && lp->chip_revision >= 'C') lp->send_cmd = TX_NOW; - if (net_debug && version_printed++ == 0) - printk(version); + netif_dbg(lp, drv, dev, "%s", version); - printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx", - dev->name, - lp->chip_type==CS8900?'0':'2', - lp->chip_type==CS8920M?"M":"", - lp->chip_revision, - dev->base_addr); + pr_info("cs89%c0%s rev %c found at %#8lx\n", + lp->chip_type == CS8900 ? '0' : '2', + lp->chip_type == CS8920M ? "M" : "", + lp->chip_revision, dev->base_addr); /* Try to read the MAC address */ if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) { - printk("\nmac89x0: No EEPROM, giving up now.\n"); + pr_info("No EEPROM, giving up now.\n"); goto out1; } else { for (i = 0; i < ETH_ALEN; i += 2) { @@ -282,39 +254,23 @@ struct net_device * __init mac89x0_probe(int unit) /* print the IRQ and ethernet address. */ - printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr); + pr_info("MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq); dev->netdev_ops = &mac89x0_netdev_ops; err = register_netdev(dev); if (err) goto out1; - return NULL; + + platform_set_drvdata(pdev, dev); + return 0; out1: nubus_writew(0, dev->base_addr + ADD_PORT); out: free_netdev(dev); - return ERR_PTR(err); + return err; } -#if 0 -/* This is useful for something, but I don't know what yet. */ -void __init reset_chip(struct net_device *dev) -{ - int reset_start_time; - - writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); - - /* wait 30 ms */ - msleep_interruptible(30); - - /* Wait until the chip is reset */ - reset_start_time = jiffies; - while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) - ; -} -#endif - /* Open/initialize the board. This is called (in the current kernel) sometime after booting when the 'ifconfig' program is run. @@ -374,11 +330,9 @@ net_send_packet(struct sk_buff *skb, struct net_device *dev) struct net_local *lp = netdev_priv(dev); unsigned long flags; - if (net_debug > 3) - printk("%s: sent %d byte packet of type %x\n", - dev->name, skb->len, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) - | skb->data[ETH_ALEN+ETH_ALEN+1]); + netif_dbg(lp, tx_queued, dev, "sent %d byte packet of type %x\n", + skb->len, skb->data[ETH_ALEN + ETH_ALEN] << 8 | + skb->data[ETH_ALEN + ETH_ALEN + 1]); /* keep the upload from being interrupted, since we ask the chip to start transmitting before the @@ -416,11 +370,6 @@ static irqreturn_t net_interrupt(int irq, void *dev_id) struct net_local *lp; int ioaddr, status; - if (dev == NULL) { - printk ("net_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - ioaddr = dev->base_addr; lp = netdev_priv(dev); @@ -432,7 +381,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id) faster than you can read them off, you're screwed. Hasta la vista, baby! */ while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) { - if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status); + netif_dbg(lp, intr, dev, "status=%04x\n", status); switch(status & ISQ_EVENT_MASK) { case ISQ_RECEIVER_EVENT: /* Got a packet(s). */ @@ -462,7 +411,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id) netif_wake_queue(dev); } if (status & TX_UNDERRUN) { - if (net_debug > 0) printk("%s: transmit underrun\n", dev->name); + netif_dbg(lp, tx_err, dev, "transmit underrun\n"); lp->send_underrun++; if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381; else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL; @@ -483,6 +432,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id) static void net_rx(struct net_device *dev) { + struct net_local *lp = netdev_priv(dev); struct sk_buff *skb; int status, length; @@ -506,7 +456,6 @@ net_rx(struct net_device *dev) /* Malloc up new buffer. */ skb = alloc_skb(length, GFP_ATOMIC); if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); dev->stats.rx_dropped++; return; } @@ -515,10 +464,9 @@ net_rx(struct net_device *dev) skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame), length); - if (net_debug > 3)printk("%s: received %d byte packet of type %x\n", - dev->name, length, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) - | skb->data[ETH_ALEN+ETH_ALEN+1]); + netif_dbg(lp, rx_status, dev, "received %d byte packet of type %x\n", + length, skb->data[ETH_ALEN + ETH_ALEN] << 8 | + skb->data[ETH_ALEN + ETH_ALEN + 1]); skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); @@ -594,7 +542,7 @@ static int set_mac_address(struct net_device *dev, void *addr) return -EADDRNOTAVAIL; memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); - printk("%s: Setting MAC address to %pM\n", dev->name, dev->dev_addr); + netdev_info(dev, "Setting MAC address to %pM\n", dev->dev_addr); /* set the Ethernet address */ for (i=0; i < ETH_ALEN/2; i++) @@ -603,32 +551,24 @@ static int set_mac_address(struct net_device *dev, void *addr) return 0; } -#ifdef MODULE - -static struct net_device *dev_cs89x0; -static int debug; - -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)"); MODULE_LICENSE("GPL"); -int __init -init_module(void) +static int mac89x0_device_remove(struct platform_device *pdev) { - net_debug = debug; - dev_cs89x0 = mac89x0_probe(-1); - if (IS_ERR(dev_cs89x0)) { - printk(KERN_WARNING "mac89x0.c: No card found\n"); - return PTR_ERR(dev_cs89x0); - } + struct net_device *dev = platform_get_drvdata(pdev); + + unregister_netdev(dev); + nubus_writew(0, dev->base_addr + ADD_PORT); + free_netdev(dev); return 0; } -void -cleanup_module(void) -{ - unregister_netdev(dev_cs89x0); - nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT); - free_netdev(dev_cs89x0); -} -#endif /* MODULE */ +static struct platform_driver mac89x0_platform_driver = { + .probe = mac89x0_device_probe, + .remove = mac89x0_device_remove, + .driver = { + .name = "mac89x0", + }, +}; + +module_platform_driver(mac89x0_platform_driver); |