summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c464
1 files changed, 374 insertions, 90 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index f7f9aa807264..e077d2508727 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -52,6 +52,7 @@
#include <linux/prefetch.h>
#include <linux/zlib.h>
#include <linux/io.h>
+#include <linux/semaphore.h>
#include <linux/stringify.h>
#include <linux/vmalloc.h>
@@ -211,6 +212,10 @@ static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
+/* Global resources for unloading a previously loaded device */
+#define BNX2X_PREV_WAIT_NEEDED 1
+static DEFINE_SEMAPHORE(bnx2x_prev_sem);
+static LIST_HEAD(bnx2x_prev_list);
/****************************************************************************
* General service functions
****************************************************************************/
@@ -8812,109 +8817,371 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp)
bnx2x_undi_int_disable_e1h(bp);
}
-static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
+static void __devinit bnx2x_prev_unload_close_mac(struct bnx2x *bp)
{
- u32 val;
+ u32 val, base_addr, offset, mask, reset_reg;
+ bool mac_stopped = false;
+ u8 port = BP_PORT(bp);
- /* possibly another driver is trying to reset the chip */
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+ reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
- /* check if doorbell queue is reset */
- if (REG_RD(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET)
- & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
+ if (!CHIP_IS_E3(bp)) {
+ val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
+ mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
+ if ((mask & reset_reg) && val) {
+ u32 wb_data[2];
+ BNX2X_DEV_INFO("Disable bmac Rx\n");
+ base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM
+ : NIG_REG_INGRESS_BMAC0_MEM;
+ offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL
+ : BIGMAC_REGISTER_BMAC_CONTROL;
- /*
- * Check if it is the UNDI driver
+ /*
+ * use rd/wr since we cannot use dmae. This is safe
+ * since MCP won't access the bus due to the request
+ * to unload, and no function on the path can be
+ * loaded at this time.
+ */
+ wb_data[0] = REG_RD(bp, base_addr + offset);
+ wb_data[1] = REG_RD(bp, base_addr + offset + 0x4);
+ wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
+ REG_WR(bp, base_addr + offset, wb_data[0]);
+ REG_WR(bp, base_addr + offset + 0x4, wb_data[1]);
+
+ }
+ BNX2X_DEV_INFO("Disable emac Rx\n");
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0);
+
+ mac_stopped = true;
+ } else {
+ if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
+ BNX2X_DEV_INFO("Disable xmac Rx\n");
+ base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+ val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI);
+ REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
+ val & ~(1 << 1));
+ REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
+ val | (1 << 1));
+ REG_WR(bp, base_addr + XMAC_REG_CTRL, 0);
+ mac_stopped = true;
+ }
+ mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
+ if (mask & reset_reg) {
+ BNX2X_DEV_INFO("Disable umac Rx\n");
+ base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+ REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0);
+ mac_stopped = true;
+ }
+ }
+
+ if (mac_stopped)
+ msleep(20);
+
+}
+
+#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
+#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
+#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
+#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
+
+static void __devinit bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 port,
+ u8 inc)
+{
+ u16 rcq, bd;
+ u32 tmp_reg = REG_RD(bp, BNX2X_PREV_UNDI_PROD_ADDR(port));
+
+ rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
+ bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
+
+ tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
+ REG_WR(bp, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
+
+ BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
+ port, bd, rcq);
+}
+
+static int __devinit bnx2x_prev_mcp_done(struct bnx2x *bp)
+{
+ u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ if (!rc) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static bool __devinit bnx2x_prev_is_path_marked(struct bnx2x *bp)
+{
+ struct bnx2x_prev_path_list *tmp_list;
+ int rc = false;
+
+ if (down_trylock(&bnx2x_prev_sem))
+ return false;
+
+ list_for_each_entry(tmp_list, &bnx2x_prev_list, list) {
+ if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot &&
+ bp->pdev->bus->number == tmp_list->bus &&
+ BP_PATH(bp) == tmp_list->path) {
+ rc = true;
+ BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
+ BP_PATH(bp));
+ break;
+ }
+ }
+
+ up(&bnx2x_prev_sem);
+
+ return rc;
+}
+
+static int __devinit bnx2x_prev_mark_path(struct bnx2x *bp)
+{
+ struct bnx2x_prev_path_list *tmp_list;
+ int rc;
+
+ tmp_list = (struct bnx2x_prev_path_list *)
+ kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL);
+ if (!tmp_list) {
+ BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
+ return -ENOMEM;
+ }
+
+ tmp_list->bus = bp->pdev->bus->number;
+ tmp_list->slot = PCI_SLOT(bp->pdev->devfn);
+ tmp_list->path = BP_PATH(bp);
+
+ rc = down_interruptible(&bnx2x_prev_sem);
+ if (rc) {
+ BNX2X_ERR("Received %d when tried to take lock\n", rc);
+ kfree(tmp_list);
+ } else {
+ BNX2X_DEV_INFO("Marked path [%d] - finished previous unload\n",
+ BP_PATH(bp));
+ list_add(&tmp_list->list, &bnx2x_prev_list);
+ up(&bnx2x_prev_sem);
+ }
+
+ return rc;
+}
+
+static bool __devinit bnx2x_can_flr(struct bnx2x *bp)
+{
+ int pos;
+ u32 cap;
+ struct pci_dev *dev = bp->pdev;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return false;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
+ if (!(cap & PCI_EXP_DEVCAP_FLR))
+ return false;
+
+ return true;
+}
+
+static int __devinit bnx2x_do_flr(struct bnx2x *bp)
+{
+ int i, pos;
+ u16 status;
+ struct pci_dev *dev = bp->pdev;
+
+ /* probe the capability first */
+ if (bnx2x_can_flr(bp))
+ return -ENOTTY;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTTY;
+
+ /* Wait for Transaction Pending bit clean */
+ for (i = 0; i < 4; i++) {
+ if (i)
+ msleep((1 << (i - 1)) * 100);
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+ if (!(status & PCI_EXP_DEVSTA_TRPND))
+ goto clear;
+ }
+
+ dev_err(&dev->dev,
+ "transaction is not cleared; proceeding with reset anyway\n");
+
+clear:
+ if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
+ BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
+ bp->common.bc_ver);
+ return -EINVAL;
+ }
+
+ bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0);
+
+ return 0;
+}
+
+static int __devinit bnx2x_prev_unload_uncommon(struct bnx2x *bp)
+{
+ int rc;
+
+ BNX2X_DEV_INFO("Uncommon unload Flow\n");
+
+ /* Test if previous unload process was already finished for this path */
+ if (bnx2x_prev_is_path_marked(bp))
+ return bnx2x_prev_mcp_done(bp);
+
+ /* If function has FLR capabilities, and existing FW version matches
+ * the one required, then FLR will be sufficient to clean any residue
+ * left by previous driver
+ */
+ if (bnx2x_test_firmware_version(bp, false) && bnx2x_can_flr(bp))
+ return bnx2x_do_flr(bp);
+
+ /* Close the MCP request, return failure*/
+ rc = bnx2x_prev_mcp_done(bp);
+ if (!rc)
+ rc = BNX2X_PREV_WAIT_NEEDED;
+
+ return rc;
+}
+
+static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp)
+{
+ u32 reset_reg, tmp_reg = 0, rc;
+ /* It is possible a previous function received 'common' answer,
+ * but hasn't loaded yet, therefore creating a scenario of
+ * multiple functions receiving 'common' on the same path.
+ */
+ BNX2X_DEV_INFO("Common unload Flow\n");
+
+ if (bnx2x_prev_is_path_marked(bp))
+ return bnx2x_prev_mcp_done(bp);
+
+ reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
+
+ /* Reset should be performed after BRB is emptied */
+ if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
+ u32 timer_count = 1000;
+ bool prev_undi = false;
+
+ /* Close the MAC Rx to prevent BRB from filling up */
+ bnx2x_prev_unload_close_mac(bp);
+
+ /* Check if the UNDI driver was previously loaded
* UNDI driver initializes CID offset for normal bell to 0x7
*/
- val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
- if (val == 0x7) {
- u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
- /* save our pf_num */
- int orig_pf_num = bp->pf_num;
- int port;
- u32 swap_en, swap_val, value;
-
- /* clear the UNDI indication */
- REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
-
- BNX2X_DEV_INFO("UNDI is active! reset device\n");
-
- /* try unload UNDI on port 0 */
- bp->pf_num = 0;
- bp->fw_seq =
- (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
- DRV_MSG_SEQ_NUMBER_MASK);
- reset_code = bnx2x_fw_command(bp, reset_code, 0);
-
- /* if UNDI is loaded on the other port */
- if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
-
- /* send "DONE" for previous unload */
- bnx2x_fw_command(bp,
- DRV_MSG_CODE_UNLOAD_DONE, 0);
-
- /* unload UNDI on port 1 */
- bp->pf_num = 1;
- bp->fw_seq =
- (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
- DRV_MSG_SEQ_NUMBER_MASK);
- reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-
- bnx2x_fw_command(bp, reset_code, 0);
+ reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
+ if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
+ tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
+ if (tmp_reg == 0x7) {
+ BNX2X_DEV_INFO("UNDI previously loaded\n");
+ prev_undi = true;
+ /* clear the UNDI indication */
+ REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
}
+ }
+ /* wait until BRB is empty */
+ tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
+ while (timer_count) {
+ u32 prev_brb = tmp_reg;
- bnx2x_undi_int_disable(bp);
- port = BP_PORT(bp);
-
- /* close input traffic and wait for it */
- /* Do not rcv packets to BRB */
- REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK :
- NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
- /* Do not direct rcv packets that are not for MCP to
- * the BRB */
- REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
- NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
- /* clear AEU */
- REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
- MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
- msleep(10);
-
- /* save NIG port swap info */
- swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
- swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
- /* reset device */
- REG_WR(bp,
- GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
- 0xd3ffffff);
-
- value = 0x1400;
- if (CHIP_IS_E3(bp)) {
- value |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
- value |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
- }
+ tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
+ if (!tmp_reg)
+ break;
- REG_WR(bp,
- GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- value);
+ BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg);
- /* take the NIG out of reset and restore swap values */
- REG_WR(bp,
- GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
- MISC_REGISTERS_RESET_REG_1_RST_NIG);
- REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
- REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+ /* reset timer as long as BRB actually gets emptied */
+ if (prev_brb > tmp_reg)
+ timer_count = 1000;
+ else
+ timer_count--;
- /* send unload done to the MCP */
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ /* If UNDI resides in memory, manually increment it */
+ if (prev_undi)
+ bnx2x_prev_unload_undi_inc(bp, BP_PORT(bp), 1);
- /* restore our func and fw_seq */
- bp->pf_num = orig_pf_num;
+ udelay(10);
}
+
+ if (!timer_count)
+ BNX2X_ERR("Failed to empty BRB, hope for the best\n");
+
}
- /* now it's safe to release the lock */
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+ /* No packets are in the pipeline, path is ready for reset */
+ bnx2x_reset_common(bp);
+
+ rc = bnx2x_prev_mark_path(bp);
+ if (rc) {
+ bnx2x_prev_mcp_done(bp);
+ return rc;
+ }
+
+ return bnx2x_prev_mcp_done(bp);
+}
+
+static int __devinit bnx2x_prev_unload(struct bnx2x *bp)
+{
+ int time_counter = 10;
+ u32 rc, fw, hw_lock_reg, hw_lock_val;
+ BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
+
+ /* Release previously held locks */
+ hw_lock_reg = (BP_FUNC(bp) <= 5) ?
+ (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) :
+ (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8);
+
+ hw_lock_val = (REG_RD(bp, hw_lock_reg));
+ if (hw_lock_val) {
+ if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
+ BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
+ REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
+ (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp)));
+ }
+
+ BNX2X_DEV_INFO("Release Previously held hw lock\n");
+ REG_WR(bp, hw_lock_reg, 0xffffffff);
+ } else
+ BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
+
+ if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) {
+ BNX2X_DEV_INFO("Release previously held alr\n");
+ REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0);
+ }
+
+
+ do {
+ /* Lock MCP using an unload request */
+ fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
+ if (!fw) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ rc = -EBUSY;
+ break;
+ }
+
+ if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
+ rc = bnx2x_prev_unload_common(bp);
+ break;
+ }
+
+ /* non-common reply from MCP night require looping */
+ rc = bnx2x_prev_unload_uncommon(bp);
+ if (rc != BNX2X_PREV_WAIT_NEEDED)
+ break;
+
+ msleep(20);
+ } while (--time_counter);
+
+ if (!time_counter || rc) {
+ BNX2X_ERR("Failed unloading previous driver, aborting\n");
+ rc = -EBUSY;
+ }
+
+ BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc);
+
+ return rc;
}
static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
@@ -10100,8 +10367,16 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
func = BP_FUNC(bp);
/* need to reset chip if undi was active */
- if (!BP_NOMCP(bp))
- bnx2x_undi_unload(bp);
+ if (!BP_NOMCP(bp)) {
+ /* init fw_seq */
+ bp->fw_seq =
+ SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK;
+ BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+
+ bnx2x_prev_unload(bp);
+ }
+
if (CHIP_REV_IS_FPGA(bp))
dev_err(&bp->pdev->dev, "FPGA detected\n");
@@ -11431,9 +11706,18 @@ static int __init bnx2x_init(void)
static void __exit bnx2x_cleanup(void)
{
+ struct list_head *pos, *q;
pci_unregister_driver(&bnx2x_pci_driver);
destroy_workqueue(bnx2x_wq);
+
+ /* Free globablly allocated resources */
+ list_for_each_safe(pos, q, &bnx2x_prev_list) {
+ struct bnx2x_prev_path_list *tmp =
+ list_entry(pos, struct bnx2x_prev_path_list, list);
+ list_del(pos);
+ kfree(tmp);
+ }
}
void bnx2x_notify_link_changed(struct bnx2x *bp)