summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/ingenic
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/ingenic')
-rw-r--r--drivers/mtd/nand/raw/ingenic/Kconfig13
-rw-r--r--drivers/mtd/nand/raw/ingenic/Makefile2
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4740_nand.c542
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4780_bch.c385
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4780_bch.h43
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4780_nand.c415
6 files changed, 1400 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 000000000000..67806c87b2c4
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,13 @@
+config MTD_NAND_JZ4740
+ tristate "Support for JZ4740 SoC NAND controller"
+ depends on MACH_JZ4740 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_JZ4780
+ tristate "Support for NAND on JZ4780 SoC"
+ depends on JZ4780_NEMC
+ help
+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+ based boards, using the BCH controller for hardware error correction.
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 000000000000..44c2ca053d24
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
new file mode 100644
index 000000000000..9526d5b23c80
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
@@ -0,0 +1,542 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 SoC NAND controller driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/gpio/consumer.h>
+
+#include <linux/platform_data/jz4740/jz4740_nand.h>
+
+#define JZ_REG_NAND_CTRL 0x50
+#define JZ_REG_NAND_ECC_CTRL 0x100
+#define JZ_REG_NAND_DATA 0x104
+#define JZ_REG_NAND_PAR0 0x108
+#define JZ_REG_NAND_PAR1 0x10C
+#define JZ_REG_NAND_PAR2 0x110
+#define JZ_REG_NAND_IRQ_STAT 0x114
+#define JZ_REG_NAND_IRQ_CTRL 0x118
+#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
+#define JZ_NAND_ECC_CTRL_RS BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
+#define JZ_NAND_STATUS_ERROR BIT(0)
+
+#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
+
+#define JZ_NAND_MEM_CMD_OFFSET 0x08000
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+
+struct jz_nand {
+ struct nand_chip chip;
+ void __iomem *base;
+ struct resource *mem;
+
+ unsigned char banks[JZ_NAND_NUM_BANKS];
+ void __iomem *bank_base[JZ_NAND_NUM_BANKS];
+ struct resource *bank_mem[JZ_NAND_NUM_BANKS];
+
+ int selected_bank;
+
+ struct gpio_desc *busy_gpio;
+ bool is_reading;
+};
+
+static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct jz_nand, chip);
+}
+
+static void jz_nand_select_chip(struct nand_chip *chip, int chipnr)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ uint32_t ctrl;
+ int banknr;
+
+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+ ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
+
+ if (chipnr == -1) {
+ banknr = -1;
+ } else {
+ banknr = nand->banks[chipnr] - 1;
+ chip->legacy.IO_ADDR_R = nand->bank_base[banknr];
+ chip->legacy.IO_ADDR_W = nand->bank_base[banknr];
+ }
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+ nand->selected_bank = banknr;
+}
+
+static void jz_nand_cmd_ctrl(struct nand_chip *chip, int dat,
+ unsigned int ctrl)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ uint32_t reg;
+ void __iomem *bank_base = nand->bank_base[nand->selected_bank];
+
+ BUG_ON(nand->selected_bank < 0);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
+ if (ctrl & NAND_ALE)
+ bank_base += JZ_NAND_MEM_ADDR_OFFSET;
+ else if (ctrl & NAND_CLE)
+ bank_base += JZ_NAND_MEM_CMD_OFFSET;
+ chip->legacy.IO_ADDR_W = bank_base;
+
+ reg = readl(nand->base + JZ_REG_NAND_CTRL);
+ if (ctrl & NAND_NCE)
+ reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ else
+ reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ writel(reg, nand->base + JZ_REG_NAND_CTRL);
+ }
+ if (dat != NAND_CMD_NONE)
+ writeb(dat, chip->legacy.IO_ADDR_W);
+}
+
+static int jz_nand_dev_ready(struct nand_chip *chip)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ return gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void jz_nand_hwctl(struct nand_chip *chip, int mode)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ uint32_t reg;
+
+ writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ reg |= JZ_NAND_ECC_CTRL_RESET;
+ reg |= JZ_NAND_ECC_CTRL_ENABLE;
+ reg |= JZ_NAND_ECC_CTRL_RS;
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+ nand->is_reading = true;
+ break;
+ case NAND_ECC_WRITE:
+ reg |= JZ_NAND_ECC_CTRL_ENCODING;
+ nand->is_reading = false;
+ break;
+ default:
+ break;
+ }
+
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz_nand_calculate_ecc_rs(struct nand_chip *chip, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ uint32_t reg, status;
+ int i;
+ unsigned int timeout = 1000;
+ static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
+ 0x8b, 0xff, 0xb7, 0x6f};
+
+ if (nand->is_reading)
+ return 0;
+
+ do {
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -1;
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ for (i = 0; i < 9; ++i)
+ ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
+
+ /* If the written data is completly 0xff, we also want to write 0xff as
+ * ecc, otherwise we will get in trouble when doing subpage writes. */
+ if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
+ memset(ecc_code, 0xff, 9);
+
+ return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
+{
+ int offset = index & 0x7;
+ uint16_t data;
+
+ index += (index >> 3);
+
+ data = dat[index];
+ data |= dat[index+1] << 8;
+
+ mask ^= (data >> offset) & 0x1ff;
+ data &= ~(0x1ff << offset);
+ data |= (mask << offset);
+
+ dat[index] = data & 0xff;
+ dat[index+1] = (data >> 8) & 0xff;
+}
+
+static int jz_nand_correct_ecc_rs(struct nand_chip *chip, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
+ int i, error_count, index;
+ uint32_t reg, status, error;
+ unsigned int timeout = 1000;
+
+ for (i = 0; i < 9; ++i)
+ writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ do {
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ if (status & JZ_NAND_STATUS_ERROR) {
+ if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+ return -EBADMSG;
+
+ error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+ for (i = 0; i < error_count; ++i) {
+ error = readl(nand->base + JZ_REG_NAND_ERR(i));
+ index = ((error >> 16) & 0x1ff) - 1;
+ if (index >= 0 && index < 512)
+ jz_nand_correct_data(dat, index, error & 0x1ff);
+ }
+
+ return error_count;
+ }
+
+ return 0;
+}
+
+static int jz_nand_ioremap_resource(struct platform_device *pdev,
+ const char *name, struct resource **res, void __iomem **base)
+{
+ int ret;
+
+ *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+ if (!*res) {
+ dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
+ ret = -ENXIO;
+ goto err;
+ }
+
+ *res = request_mem_region((*res)->start, resource_size(*res),
+ pdev->name);
+ if (!*res) {
+ dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
+ ret = -EBUSY;
+ goto err;
+ }
+
+ *base = ioremap((*res)->start, resource_size(*res));
+ if (!*base) {
+ dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
+ ret = -EBUSY;
+ goto err_release_mem;
+ }
+
+ return 0;
+
+err_release_mem:
+ release_mem_region((*res)->start, resource_size(*res));
+err:
+ *res = NULL;
+ *base = NULL;
+ return ret;
+}
+
+static inline void jz_nand_iounmap_resource(struct resource *res,
+ void __iomem *base)
+{
+ iounmap(base);
+ release_mem_region(res->start, resource_size(res));
+}
+
+static int jz_nand_detect_bank(struct platform_device *pdev,
+ struct jz_nand *nand, unsigned char bank,
+ size_t chipnr, uint8_t *nand_maf_id,
+ uint8_t *nand_dev_id)
+{
+ int ret;
+ char res_name[6];
+ uint32_t ctrl;
+ struct nand_chip *chip = &nand->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 id[2];
+
+ /* Request I/O resource. */
+ sprintf(res_name, "bank%d", bank);
+ ret = jz_nand_ioremap_resource(pdev, res_name,
+ &nand->bank_mem[bank - 1],
+ &nand->bank_base[bank - 1]);
+ if (ret)
+ return ret;
+
+ /* Enable chip in bank. */
+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+ ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+ if (chipnr == 0) {
+ /* Detect first chip. */
+ ret = nand_scan(chip, 1);
+ if (ret)
+ goto notfound_id;
+
+ /* Retrieve the IDs from the first chip. */
+ nand_select_target(chip, 0);
+ nand_reset_op(chip);
+ nand_readid_op(chip, 0, id, sizeof(id));
+ *nand_maf_id = id[0];
+ *nand_dev_id = id[1];
+ } else {
+ /* Detect additional chip. */
+ nand_select_target(chip, chipnr);
+ nand_reset_op(chip);
+ nand_readid_op(chip, 0, id, sizeof(id));
+ if (*nand_maf_id != id[0] || *nand_dev_id != id[1]) {
+ ret = -ENODEV;
+ goto notfound_id;
+ }
+
+ /* Update size of the MTD. */
+ chip->numchips++;
+ mtd->size += chip->chipsize;
+ }
+
+ dev_info(&pdev->dev, "Found chip %zu on bank %i\n", chipnr, bank);
+ return 0;
+
+notfound_id:
+ dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
+ ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+ return ret;
+}
+
+static int jz_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct device *dev = mtd->dev.parent;
+ struct jz_nand_platform_data *pdata = dev_get_platdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdata && pdata->ident_callback)
+ pdata->ident_callback(pdev, mtd, &pdata->partitions,
+ &pdata->num_partitions);
+
+ return 0;
+}
+
+static const struct nand_controller_ops jz_nand_controller_ops = {
+ .attach_chip = jz_nand_attach_chip,
+};
+
+static int jz_nand_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct jz_nand *nand;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ size_t chipnr, bank_idx;
+ uint8_t nand_maf_id = 0, nand_dev_id = 0;
+
+ nand = kzalloc(sizeof(*nand), GFP_KERNEL);
+ if (!nand)
+ return -ENOMEM;
+
+ ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
+ if (ret)
+ goto err_free;
+
+ nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
+ ret);
+ goto err_iounmap_mmio;
+ }
+
+ chip = &nand->chip;
+ mtd = nand_to_mtd(chip);
+ mtd->dev.parent = &pdev->dev;
+ mtd->name = "jz4740-nand";
+
+ chip->ecc.hwctl = jz_nand_hwctl;
+ chip->ecc.calculate = jz_nand_calculate_ecc_rs;
+ chip->ecc.correct = jz_nand_correct_ecc_rs;
+ chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 9;
+ chip->ecc.strength = 4;
+ chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
+
+ chip->legacy.chip_delay = 50;
+ chip->legacy.cmd_ctrl = jz_nand_cmd_ctrl;
+ chip->legacy.select_chip = jz_nand_select_chip;
+ chip->legacy.dummy_controller.ops = &jz_nand_controller_ops;
+
+ if (nand->busy_gpio)
+ chip->legacy.dev_ready = jz_nand_dev_ready;
+
+ platform_set_drvdata(pdev, nand);
+
+ /* We are going to autodetect NAND chips in the banks specified in the
+ * platform data. Although nand_scan_ident() can detect multiple chips,
+ * it requires those chips to be numbered consecuitively, which is not
+ * always the case for external memory banks. And a fixed chip-to-bank
+ * mapping is not practical either, since for example Dingoo units
+ * produced at different times have NAND chips in different banks.
+ */
+ chipnr = 0;
+ for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
+ unsigned char bank;
+
+ /* If there is no platform data, look for NAND in bank 1,
+ * which is the most likely bank since it is the only one
+ * that can be booted from.
+ */
+ bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
+ if (bank == 0)
+ break;
+ if (bank > JZ_NAND_NUM_BANKS) {
+ dev_warn(&pdev->dev,
+ "Skipping non-existing bank: %d\n", bank);
+ continue;
+ }
+ /* The detection routine will directly or indirectly call
+ * jz_nand_select_chip(), so nand->banks has to contain the
+ * bank we're checking.
+ */
+ nand->banks[chipnr] = bank;
+ if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
+ &nand_maf_id, &nand_dev_id) == 0)
+ chipnr++;
+ else
+ nand->banks[chipnr] = 0;
+ }
+ if (chipnr == 0) {
+ dev_err(&pdev->dev, "No NAND chips found\n");
+ goto err_iounmap_mmio;
+ }
+
+ ret = mtd_device_register(mtd, pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add mtd device\n");
+ goto err_cleanup_nand;
+ }
+
+ dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
+
+ return 0;
+
+err_cleanup_nand:
+ nand_cleanup(chip);
+ while (chipnr--) {
+ unsigned char bank = nand->banks[chipnr];
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+ }
+ writel(0, nand->base + JZ_REG_NAND_CTRL);
+err_iounmap_mmio:
+ jz_nand_iounmap_resource(nand->mem, nand->base);
+err_free:
+ kfree(nand);
+ return ret;
+}
+
+static int jz_nand_remove(struct platform_device *pdev)
+{
+ struct jz_nand *nand = platform_get_drvdata(pdev);
+ size_t i;
+
+ nand_release(&nand->chip);
+
+ /* Deassert and disable all chips */
+ writel(0, nand->base + JZ_REG_NAND_CTRL);
+
+ for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
+ unsigned char bank = nand->banks[i];
+ if (bank != 0) {
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+ }
+ }
+
+ jz_nand_iounmap_resource(nand->mem, nand->base);
+
+ kfree(nand);
+
+ return 0;
+}
+
+static struct platform_driver jz_nand_driver = {
+ .probe = jz_nand_probe,
+ .remove = jz_nand_remove,
+ .driver = {
+ .name = "jz4740-nand",
+ },
+};
+
+module_platform_driver(jz_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
+MODULE_ALIAS("platform:jz4740-nand");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
new file mode 100644
index 000000000000..c5f74ed85862
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
@@ -0,0 +1,385 @@
+/*
+ * JZ4780 BCH controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "jz4780_bch.h"
+
+#define BCH_BHCR 0x0
+#define BCH_BHCCR 0x8
+#define BCH_BHCNT 0xc
+#define BCH_BHDR 0x10
+#define BCH_BHPAR0 0x14
+#define BCH_BHERR0 0x84
+#define BCH_BHINT 0x184
+#define BCH_BHINTES 0x188
+#define BCH_BHINTEC 0x18c
+#define BCH_BHINTE 0x190
+
+#define BCH_BHCR_BSEL_SHIFT 4
+#define BCH_BHCR_BSEL_MASK (0x7f << BCH_BHCR_BSEL_SHIFT)
+#define BCH_BHCR_ENCE BIT(2)
+#define BCH_BHCR_INIT BIT(1)
+#define BCH_BHCR_BCHE BIT(0)
+
+#define BCH_BHCNT_PARITYSIZE_SHIFT 16
+#define BCH_BHCNT_PARITYSIZE_MASK (0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
+#define BCH_BHCNT_BLOCKSIZE_SHIFT 0
+#define BCH_BHCNT_BLOCKSIZE_MASK (0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
+
+#define BCH_BHERR_MASK_SHIFT 16
+#define BCH_BHERR_MASK_MASK (0xffff << BCH_BHERR_MASK_SHIFT)
+#define BCH_BHERR_INDEX_SHIFT 0
+#define BCH_BHERR_INDEX_MASK (0x7ff << BCH_BHERR_INDEX_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT 24
+#define BCH_BHINT_ERRC_MASK (0x7f << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT 16
+#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_DECF BIT(3)
+#define BCH_BHINT_ENCF BIT(2)
+#define BCH_BHINT_UNCOR BIT(1)
+#define BCH_BHINT_ERR BIT(0)
+
+#define BCH_CLK_RATE (200 * 1000 * 1000)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US 100000
+
+struct jz4780_bch {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ struct mutex lock;
+};
+
+static void jz4780_bch_init(struct jz4780_bch *bch,
+ struct jz4780_bch_params *params, bool encode)
+{
+ u32 reg;
+
+ /* Clear interrupt status. */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Set up BCH count register. */
+ reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
+ reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
+ writel(reg, bch->base + BCH_BHCNT);
+
+ /* Initialise and enable BCH. */
+ reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
+ reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
+ if (encode)
+ reg |= BCH_BHCR_ENCE;
+ writel(reg, bch->base + BCH_BHCR);
+}
+
+static void jz4780_bch_disable(struct jz4780_bch *bch)
+{
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+ writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
+}
+
+static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ const u32 *src32;
+ const u8 *src8;
+
+ src32 = (const u32 *)buf;
+ while (size32--)
+ writel(*src32++, bch->base + BCH_BHDR);
+
+ src8 = (const u8 *)src32;
+ while (size8--)
+ writeb(*src8++, bch->base + BCH_BHDR);
+}
+
+static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ u32 *dest32;
+ u8 *dest8;
+ u32 val, offset = 0;
+
+ dest32 = (u32 *)buf;
+ while (size32--) {
+ *dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
+ offset += sizeof(u32);
+ }
+
+ dest8 = (u8 *)dest32;
+ val = readl(bch->base + BCH_BHPAR0 + offset);
+ switch (size8) {
+ case 3:
+ dest8[2] = (val >> 16) & 0xff;
+ /* fall through */
+ case 2:
+ dest8[1] = (val >> 8) & 0xff;
+ /* fall through */
+ case 1:
+ dest8[0] = val & 0xff;
+ break;
+ }
+}
+
+static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
+ u32 *status)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ * While we could use interrupts here and sleep until the operation
+ * completes, the controller works fairly quickly (usually a few
+ * microseconds) and so the overhead of sleeping until we get an
+ * interrupt quite noticeably decreases performance.
+ */
+ ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
+ (reg & irq) == irq, 0, BCH_TIMEOUT_US);
+ if (ret)
+ return false;
+
+ if (status)
+ *status = reg;
+
+ writel(reg, bch->base + BCH_BHINT);
+ return true;
+}
+
+/**
+ * jz4780_bch_calculate() - calculate ECC for a data buffer
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
+ * controller.
+ */
+int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ int ret = 0;
+
+ mutex_lock(&bch->lock);
+ jz4780_bch_init(bch, params, true);
+ jz4780_bch_write_data(bch, buf, params->size);
+
+ if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
+ jz4780_bch_read_parity(bch, ecc_code, params->bytes);
+ } else {
+ dev_err(bch->dev, "timed out while calculating ECC\n");
+ ret = -ETIMEDOUT;
+ }
+
+ jz4780_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+ return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_calculate);
+
+/**
+ * jz4780_bch_correct() - detect and correct bit errors
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ u32 reg, mask, index;
+ int i, ret, count;
+
+ mutex_lock(&bch->lock);
+
+ jz4780_bch_init(bch, params, false);
+ jz4780_bch_write_data(bch, buf, params->size);
+ jz4780_bch_write_data(bch, ecc_code, params->bytes);
+
+ if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
+ dev_err(bch->dev, "timed out while correcting data\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ if (reg & BCH_BHINT_UNCOR) {
+ dev_warn(bch->dev, "uncorrectable ECC error\n");
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ /* Correct any detected errors. */
+ if (reg & BCH_BHINT_ERR) {
+ count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+ ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
+
+ for (i = 0; i < count; i++) {
+ reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+ mask = (reg & BCH_BHERR_MASK_MASK) >>
+ BCH_BHERR_MASK_SHIFT;
+ index = (reg & BCH_BHERR_INDEX_MASK) >>
+ BCH_BHERR_INDEX_SHIFT;
+ buf[(index * 2) + 0] ^= mask;
+ buf[(index * 2) + 1] ^= mask >> 8;
+ }
+ } else {
+ ret = 0;
+ }
+
+out:
+ jz4780_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+ return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_correct);
+
+/**
+ * jz4780_bch_get() - get the BCH controller device
+ * @np: BCH device tree node.
+ *
+ * Gets the BCH controller device from the specified device tree node. The
+ * device must be released with jz4780_bch_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
+{
+ struct platform_device *pdev;
+ struct jz4780_bch *bch;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ bch = platform_get_drvdata(pdev);
+ if (!bch) {
+ put_device(&pdev->dev);
+ return ERR_PTR(-EPROBE_DEFER);
+ }
+
+ clk_prepare_enable(bch->clk);
+
+ return bch;
+}
+
+/**
+ * of_jz4780_bch_get() - get the BCH controller from a DT node
+ * @of_node: the node that contains a bch-controller property.
+ *
+ * Get the bch-controller property from the given device tree
+ * node and pass it to jz4780_bch_get to do the work.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
+{
+ struct jz4780_bch *bch = NULL;
+ struct device_node *np;
+
+ np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+ if (np) {
+ bch = jz4780_bch_get(np);
+ of_node_put(np);
+ }
+ return bch;
+}
+EXPORT_SYMBOL(of_jz4780_bch_get);
+
+/**
+ * jz4780_bch_release() - release the BCH controller device
+ * @bch: BCH device.
+ */
+void jz4780_bch_release(struct jz4780_bch *bch)
+{
+ clk_disable_unprepare(bch->clk);
+ put_device(bch->dev);
+}
+EXPORT_SYMBOL(jz4780_bch_release);
+
+static int jz4780_bch_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct jz4780_bch *bch;
+ struct resource *res;
+
+ bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
+ if (!bch)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ bch->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(bch->base))
+ return PTR_ERR(bch->base);
+
+ jz4780_bch_disable(bch);
+
+ bch->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(bch->clk)) {
+ dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
+ return PTR_ERR(bch->clk);
+ }
+
+ clk_set_rate(bch->clk, BCH_CLK_RATE);
+
+ mutex_init(&bch->lock);
+
+ bch->dev = dev;
+ platform_set_drvdata(pdev, bch);
+
+ return 0;
+}
+
+static const struct of_device_id jz4780_bch_dt_match[] = {
+ { .compatible = "ingenic,jz4780-bch" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
+
+static struct platform_driver jz4780_bch_driver = {
+ .probe = jz4780_bch_probe,
+ .driver = {
+ .name = "jz4780-bch",
+ .of_match_table = of_match_ptr(jz4780_bch_dt_match),
+ },
+};
+module_platform_driver(jz4780_bch_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.h b/drivers/mtd/nand/raw/ingenic/jz4780_bch.h
new file mode 100644
index 000000000000..bf4718088a3a
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.h
@@ -0,0 +1,43 @@
+/*
+ * JZ4780 BCH controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
+#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
+
+#include <linux/types.h>
+
+struct device;
+struct device_node;
+struct jz4780_bch;
+
+/**
+ * struct jz4780_bch_params - BCH parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct jz4780_bch_params {
+ int size;
+ int bytes;
+ int strength;
+};
+
+int jz4780_bch_calculate(struct jz4780_bch *bch,
+ struct jz4780_bch_params *params,
+ const u8 *buf, u8 *ecc_code);
+int jz4780_bch_correct(struct jz4780_bch *bch,
+ struct jz4780_bch_params *params, u8 *buf,
+ u8 *ecc_code);
+
+void jz4780_bch_release(struct jz4780_bch *bch);
+struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
+
+#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_nand.c b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
new file mode 100644
index 000000000000..22e58975f0d5
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
@@ -0,0 +1,415 @@
+/*
+ * JZ4780 NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "jz4780_bch.h"
+
+#define DRV_NAME "jz4780-nand"
+
+#define OFFSET_DATA 0x00000000
+#define OFFSET_CMD 0x00400000
+#define OFFSET_ADDR 0x00800000
+
+/* Command delay when there is no R/B pin. */
+#define RB_DELAY_US 100
+
+struct jz4780_nand_cs {
+ unsigned int bank;
+ void __iomem *base;
+};
+
+struct jz4780_nand_controller {
+ struct device *dev;
+ struct jz4780_bch *bch;
+ struct nand_controller controller;
+ unsigned int num_banks;
+ struct list_head chips;
+ int selected;
+ struct jz4780_nand_cs cs[];
+};
+
+struct jz4780_nand_chip {
+ struct nand_chip chip;
+ struct list_head chip_list;
+
+ struct gpio_desc *busy_gpio;
+ struct gpio_desc *wp_gpio;
+ unsigned int reading: 1;
+};
+
+static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
+}
+
+static inline struct jz4780_nand_controller
+*to_jz4780_nand_controller(struct nand_controller *ctrl)
+{
+ return container_of(ctrl, struct jz4780_nand_controller, controller);
+}
+
+static void jz4780_nand_select_chip(struct nand_chip *chip, int chipnr)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+ struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+ struct jz4780_nand_cs *cs;
+
+ /* Ensure the currently selected chip is deasserted. */
+ if (chipnr == -1 && nfc->selected >= 0) {
+ cs = &nfc->cs[nfc->selected];
+ jz4780_nemc_assert(nfc->dev, cs->bank, false);
+ }
+
+ nfc->selected = chipnr;
+}
+
+static void jz4780_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
+ unsigned int ctrl)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+ struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+ struct jz4780_nand_cs *cs;
+
+ if (WARN_ON(nfc->selected < 0))
+ return;
+
+ cs = &nfc->cs[nfc->selected];
+
+ jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_ALE)
+ writeb(cmd, cs->base + OFFSET_ADDR);
+ else if (ctrl & NAND_CLE)
+ writeb(cmd, cs->base + OFFSET_CMD);
+}
+
+static int jz4780_nand_dev_ready(struct nand_chip *chip)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+
+ return !gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void jz4780_nand_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+
+ nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int jz4780_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
+ u8 *ecc_code)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+ struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+ struct jz4780_bch_params params;
+
+ /*
+ * Don't need to generate the ECC when reading, BCH does it for us as
+ * part of decoding/correction.
+ */
+ if (nand->reading)
+ return 0;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
+}
+
+static int jz4780_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
+{
+ struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
+ struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+ struct jz4780_bch_params params;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
+}
+
+static int jz4780_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
+ int eccbytes;
+
+ chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
+ (chip->ecc.strength / 8);
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_HW:
+ if (!nfc->bch) {
+ dev_err(nfc->dev,
+ "HW BCH selected, but BCH controller not found\n");
+ return -ENODEV;
+ }
+
+ chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
+ chip->ecc.calculate = jz4780_nand_ecc_calculate;
+ chip->ecc.correct = jz4780_nand_ecc_correct;
+ /* fall through */
+ case NAND_ECC_SOFT:
+ dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+ (nfc->bch) ? "hardware BCH" : "software ECC",
+ chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+ break;
+ case NAND_ECC_NONE:
+ dev_info(nfc->dev, "not using ECC\n");
+ break;
+ default:
+ dev_err(nfc->dev, "ECC mode %d not supported\n",
+ chip->ecc.mode);
+ return -EINVAL;
+ }
+
+ /* The NAND core will generate the ECC layout for SW ECC */
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+ if (eccbytes > mtd->oobsize - 2) {
+ dev_err(nfc->dev,
+ "invalid ECC config: required %d ECC bytes, but only %d are available",
+ eccbytes, mtd->oobsize - 2);
+ return -EINVAL;
+ }
+
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+
+ return 0;
+}
+
+static const struct nand_controller_ops jz4780_nand_controller_ops = {
+ .attach_chip = jz4780_nand_attach_chip,
+};
+
+static int jz4780_nand_init_chip(struct platform_device *pdev,
+ struct jz4780_nand_controller *nfc,
+ struct device_node *np,
+ unsigned int chipnr)
+{
+ struct device *dev = &pdev->dev;
+ struct jz4780_nand_chip *nand;
+ struct jz4780_nand_cs *cs;
+ struct resource *res;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ const __be32 *reg;
+ int ret = 0;
+
+ cs = &nfc->cs[chipnr];
+
+ reg = of_get_property(np, "reg", NULL);
+ if (!reg)
+ return -EINVAL;
+
+ cs->bank = be32_to_cpu(*reg);
+
+ jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
+ cs->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cs->base))
+ return PTR_ERR(cs->base);
+
+ nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+ if (!nand)
+ return -ENOMEM;
+
+ nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+ return ret;
+ } else if (nand->busy_gpio) {
+ nand->chip.legacy.dev_ready = jz4780_nand_dev_ready;
+ }
+
+ nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+ if (IS_ERR(nand->wp_gpio)) {
+ ret = PTR_ERR(nand->wp_gpio);
+ dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+ return ret;
+ }
+
+ chip = &nand->chip;
+ mtd = nand_to_mtd(chip);
+ mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+ cs->bank);
+ if (!mtd->name)
+ return -ENOMEM;
+ mtd->dev.parent = dev;
+
+ chip->legacy.IO_ADDR_R = cs->base + OFFSET_DATA;
+ chip->legacy.IO_ADDR_W = cs->base + OFFSET_DATA;
+ chip->legacy.chip_delay = RB_DELAY_US;
+ chip->options = NAND_NO_SUBPAGE_WRITE;
+ chip->legacy.select_chip = jz4780_nand_select_chip;
+ chip->legacy.cmd_ctrl = jz4780_nand_cmd_ctrl;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->controller = &nfc->controller;
+ nand_set_flash_node(chip, np);
+
+ chip->controller->ops = &jz4780_nand_controller_ops;
+ ret = nand_scan(chip, 1);
+ if (ret)
+ return ret;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret) {
+ nand_release(chip);
+ return ret;
+ }
+
+ list_add_tail(&nand->chip_list, &nfc->chips);
+
+ return 0;
+}
+
+static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
+{
+ struct jz4780_nand_chip *chip;
+
+ while (!list_empty(&nfc->chips)) {
+ chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
+ nand_release(&chip->chip);
+ list_del(&chip->chip_list);
+ }
+}
+
+static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ int i = 0;
+ int ret;
+ int num_chips = of_get_child_count(dev->of_node);
+
+ if (num_chips > nfc->num_banks) {
+ dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(dev->of_node, np) {
+ ret = jz4780_nand_init_chip(pdev, nfc, np, i);
+ if (ret) {
+ jz4780_nand_cleanup_chips(nfc);
+ return ret;
+ }
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int jz4780_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned int num_banks;
+ struct jz4780_nand_controller *nfc;
+ int ret;
+
+ num_banks = jz4780_nemc_num_banks(dev);
+ if (num_banks == 0) {
+ dev_err(dev, "no banks found\n");
+ return -ENODEV;
+ }
+
+ nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ /*
+ * Check for BCH HW before we call nand_scan_ident, to prevent us from
+ * having to call it again if the BCH driver returns -EPROBE_DEFER.
+ */
+ nfc->bch = of_jz4780_bch_get(dev->of_node);
+ if (IS_ERR(nfc->bch))
+ return PTR_ERR(nfc->bch);
+
+ nfc->dev = dev;
+ nfc->num_banks = num_banks;
+
+ nand_controller_init(&nfc->controller);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ ret = jz4780_nand_init_chips(nfc, pdev);
+ if (ret) {
+ if (nfc->bch)
+ jz4780_bch_release(nfc->bch);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, nfc);
+ return 0;
+}
+
+static int jz4780_nand_remove(struct platform_device *pdev)
+{
+ struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
+
+ if (nfc->bch)
+ jz4780_bch_release(nfc->bch);
+
+ jz4780_nand_cleanup_chips(nfc);
+
+ return 0;
+}
+
+static const struct of_device_id jz4780_nand_dt_match[] = {
+ { .compatible = "ingenic,jz4780-nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
+
+static struct platform_driver jz4780_nand_driver = {
+ .probe = jz4780_nand_probe,
+ .remove = jz4780_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(jz4780_nand_dt_match),
+ },
+};
+module_platform_driver(jz4780_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-19 13:21:14 +0300