diff options
Diffstat (limited to 'drivers/mmc')
28 files changed, 5889 insertions, 1273 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f9ad960d7c1a..66e5a5487c20 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -2,7 +2,7 @@ * Block driver for media (i.e., flash cards) * * Copyright 2002 Hewlett-Packard Company - * Copyright 2005-2007 Pierre Ossman + * Copyright 2005-2008 Pierre Ossman * * Use consistent with the GNU GPL is permitted, * provided that this copyright notice is @@ -237,17 +237,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) if (brq.data.blocks > card->host->max_blk_count) brq.data.blocks = card->host->max_blk_count; - /* - * If the host doesn't support multiple block writes, force - * block writes to single block. SD cards are excepted from - * this rule as they support querying the number of - * successfully written sectors. - */ - if (rq_data_dir(req) != READ && - !(card->host->caps & MMC_CAP_MULTIWRITE) && - !mmc_card_sd(card)) - brq.data.blocks = 1; - if (brq.data.blocks > 1) { /* SPI multiblock writes terminate using a special * token, not a STOP_TRANSMISSION request. @@ -296,22 +285,24 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_post(mq); + /* + * Check for errors here, but don't jump to cmd_err + * until later as we need to wait for the card to leave + * programming mode even when things go wrong. + */ if (brq.cmd.error) { printk(KERN_ERR "%s: error %d sending read/write command\n", req->rq_disk->disk_name, brq.cmd.error); - goto cmd_err; } if (brq.data.error) { printk(KERN_ERR "%s: error %d transferring data\n", req->rq_disk->disk_name, brq.data.error); - goto cmd_err; } if (brq.stop.error) { printk(KERN_ERR "%s: error %d sending stop command\n", req->rq_disk->disk_name, brq.stop.error); - goto cmd_err; } if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { @@ -344,6 +335,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) #endif } + if (brq.cmd.error || brq.data.error || brq.stop.error) + goto cmd_err; + /* * A block was successfully transferred. */ @@ -362,30 +356,32 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * mark the known good sectors as ok. * * If the card is not SD, we can still ok written sectors - * if the controller can do proper error reporting. + * as reported by the controller (which might be less than + * the real number of written sectors, but never more). * * For reads we just fail the entire chunk as that should * be safe in all cases. */ - if (rq_data_dir(req) != READ && mmc_card_sd(card)) { - u32 blocks; - unsigned int bytes; - - blocks = mmc_sd_num_wr_blocks(card); - if (blocks != (u32)-1) { - if (card->csd.write_partial) - bytes = blocks << md->block_bits; - else - bytes = blocks << 9; + if (rq_data_dir(req) != READ) { + if (mmc_card_sd(card)) { + u32 blocks; + unsigned int bytes; + + blocks = mmc_sd_num_wr_blocks(card); + if (blocks != (u32)-1) { + if (card->csd.write_partial) + bytes = blocks << md->block_bits; + else + bytes = blocks << 9; + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, 0, bytes); + spin_unlock_irq(&md->lock); + } + } else { spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, bytes); + ret = __blk_end_request(req, 0, brq.data.bytes_xfered); spin_unlock_irq(&md->lock); } - } else if (rq_data_dir(req) != READ && - (card->host->caps & MMC_CAP_MULTIWRITE)) { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); - spin_unlock_irq(&md->lock); } mmc_release_host(card->host); diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index ffadee549a41..d6b9b486417c 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/card/mmc_test.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,13 +26,17 @@ struct mmc_test_card { struct mmc_card *card; + u8 scratch[BUFFER_SIZE]; u8 *buffer; }; /*******************************************************************/ -/* Helper functions */ +/* General helper functions */ /*******************************************************************/ +/* + * Configure correct block size in card + */ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) { struct mmc_command cmd; @@ -48,117 +52,61 @@ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) return 0; } -static int __mmc_test_transfer(struct mmc_test_card *test, int write, - unsigned broken_xfer, u8 *buffer, unsigned addr, - unsigned blocks, unsigned blksz) +/* + * Fill in the mmc_request structure given a set of transfer parameters. + */ +static void mmc_test_prepare_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len, + unsigned dev_addr, unsigned blocks, unsigned blksz, int write) { - int ret, busy; - - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; - - struct scatterlist sg; - - memset(&mrq, 0, sizeof(struct mmc_request)); - - mrq.cmd = &cmd; - mrq.data = &data; - - memset(&cmd, 0, sizeof(struct mmc_command)); + BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop); - if (broken_xfer) { - if (blocks > 1) { - cmd.opcode = write ? - MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; - } else { - cmd.opcode = MMC_SEND_STATUS; - } + if (blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; } else { - if (blocks > 1) { - cmd.opcode = write ? - MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; - } else { - cmd.opcode = write ? - MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; - } + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; } - if (broken_xfer && blocks == 1) - cmd.arg = test->card->rca << 16; - else - cmd.arg = addr; - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + mrq->cmd->arg = dev_addr; + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; - memset(&stop, 0, sizeof(struct mmc_command)); - - if (!broken_xfer && (blocks > 1)) { - stop.opcode = MMC_STOP_TRANSMISSION; - stop.arg = 0; - stop.flags = MMC_RSP_R1B | MMC_CMD_AC; - - mrq.stop = &stop; + if (blocks == 1) + mrq->stop = NULL; + else { + mrq->stop->opcode = MMC_STOP_TRANSMISSION; + mrq->stop->arg = 0; + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC; } - memset(&data, 0, sizeof(struct mmc_data)); - - data.blksz = blksz; - data.blocks = blocks; - data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; - data.sg = &sg; - data.sg_len = 1; - - sg_init_one(&sg, buffer, blocks * blksz); - - mmc_set_data_timeout(&data, test->card); + mrq->data->blksz = blksz; + mrq->data->blocks = blocks; + mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + mrq->data->sg = sg; + mrq->data->sg_len = sg_len; - mmc_wait_for_req(test->card->host, &mrq); - - ret = 0; - - if (broken_xfer) { - if (!ret && cmd.error) - ret = cmd.error; - if (!ret && data.error == 0) - ret = RESULT_FAIL; - if (!ret && data.error != -ETIMEDOUT) - ret = data.error; - if (!ret && stop.error) - ret = stop.error; - if (blocks > 1) { - if (!ret && data.bytes_xfered > blksz) - ret = RESULT_FAIL; - } else { - if (!ret && data.bytes_xfered > 0) - ret = RESULT_FAIL; - } - } else { - if (!ret && cmd.error) - ret = cmd.error; - if (!ret && data.error) - ret = data.error; - if (!ret && stop.error) - ret = stop.error; - if (!ret && data.bytes_xfered != blocks * blksz) - ret = RESULT_FAIL; - } + mmc_set_data_timeout(mrq->data, test->card); +} - if (ret == -EINVAL) - ret = RESULT_UNSUP_HOST; +/* + * Wait for the card to finish the busy state + */ +static int mmc_test_wait_busy(struct mmc_test_card *test) +{ + int ret, busy; + struct mmc_command cmd; busy = 0; do { - int ret2; - memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; cmd.arg = test->card->rca << 16; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - ret2 = mmc_wait_for_cmd(test->card->host, &cmd, 0); - if (ret2) + ret = mmc_wait_for_cmd(test->card->host, &cmd, 0); + if (ret) break; if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) { @@ -172,14 +120,57 @@ static int __mmc_test_transfer(struct mmc_test_card *test, int write, return ret; } -static int mmc_test_transfer(struct mmc_test_card *test, int write, - u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz) +/* + * Transfer a single sector of kernel addressable data + */ +static int mmc_test_buffer_transfer(struct mmc_test_card *test, + u8 *buffer, unsigned addr, unsigned blksz, int write) { - return __mmc_test_transfer(test, write, 0, buffer, - addr, blocks, blksz); + int ret; + + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; + + struct scatterlist sg; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, buffer, blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, addr, 1, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + ret = mmc_test_wait_busy(test); + if (ret) + return ret; + + return 0; } -static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) +/*******************************************************************/ +/* Test preparation and cleanup */ +/*******************************************************************/ + +/* + * Fill the first couple of sectors of the card with known data + * so that bad reads/writes can be detected + */ +static int __mmc_test_prepare(struct mmc_test_card *test, int write) { int ret, i; @@ -188,15 +179,14 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) return ret; if (write) - memset(test->buffer, 0xDF, BUFFER_SIZE); + memset(test->buffer, 0xDF, 512); else { - for (i = 0;i < BUFFER_SIZE;i++) + for (i = 0;i < 512;i++) test->buffer[i] = i; } for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_transfer(test, 1, test->buffer + i * 512, - i * 512, 1, 512); + ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); if (ret) return ret; } @@ -204,41 +194,218 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) return 0; } -static int mmc_test_prepare_verify_write(struct mmc_test_card *test) +static int mmc_test_prepare_write(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 1); +} + +static int mmc_test_prepare_read(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 0); +} + +static int mmc_test_cleanup(struct mmc_test_card *test) { - return mmc_test_prepare_verify(test, 1); + int ret, i; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + memset(test->buffer, 0, 512); + + for (i = 0;i < BUFFER_SIZE / 512;i++) { + ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); + if (ret) + return ret; + } + + return 0; } -static int mmc_test_prepare_verify_read(struct mmc_test_card *test) +/*******************************************************************/ +/* Test execution helpers */ +/*******************************************************************/ + +/* + * Modifies the mmc_request to perform the "short transfer" tests + */ +static void mmc_test_prepare_broken_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, int write) { - return mmc_test_prepare_verify(test, 0); + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + if (mrq->data->blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; + mrq->stop = NULL; + } else { + mrq->cmd->opcode = MMC_SEND_STATUS; + mrq->cmd->arg = test->card->rca << 16; + } } -static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, - u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz) +/* + * Checks that a normal transfer didn't have any errors + */ +static int mmc_test_check_result(struct mmc_test_card *test, + struct mmc_request *mrq) { - int ret, i, sectors; + int ret; - /* - * It is assumed that the above preparation has been done. - */ + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + ret = 0; - memset(test->buffer, 0, BUFFER_SIZE); + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (!ret && mrq->data->bytes_xfered != + mrq->data->blocks * mrq->data->blksz) + ret = RESULT_FAIL; + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; +} + +/* + * Checks that a "short transfer" behaved as expected + */ +static int mmc_test_check_broken_result(struct mmc_test_card *test, + struct mmc_request *mrq) +{ + int ret; + + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + ret = 0; + + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error == 0) + ret = RESULT_FAIL; + if (!ret && mrq->data->error != -ETIMEDOUT) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (mrq->data->blocks > 1) { + if (!ret && mrq->data->bytes_xfered > mrq->data->blksz) + ret = RESULT_FAIL; + } else { + if (!ret && mrq->data->bytes_xfered > 0) + ret = RESULT_FAIL; + } + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; +} + +/* + * Tests a basic transfer with certain parameters + */ +static int mmc_test_simple_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) +{ + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + mmc_test_prepare_mrq(test, &mrq, sg, sg_len, dev_addr, + blocks, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); + + mmc_test_wait_busy(test); + + return mmc_test_check_result(test, &mrq); +} + +/* + * Tests a transfer where the card will fail completely or partly + */ +static int mmc_test_broken_transfer(struct mmc_test_card *test, + unsigned blocks, unsigned blksz, int write) +{ + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; + + struct scatterlist sg; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, test->buffer, blocks * blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, 0, blocks, blksz, write); + mmc_test_prepare_broken_mrq(test, &mrq, write); + + mmc_wait_for_req(test->card->host, &mrq); + + mmc_test_wait_busy(test); + + return mmc_test_check_broken_result(test, &mrq); +} + +/* + * Does a complete transfer test where data is also validated + * + * Note: mmc_test_prepare() must have been done before this call + */ +static int mmc_test_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) +{ + int ret, i; + unsigned long flags; if (write) { for (i = 0;i < blocks * blksz;i++) - buffer[i] = i; + test->scratch[i] = i; + } else { + memset(test->scratch, 0, BUFFER_SIZE); } + local_irq_save(flags); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); ret = mmc_test_set_blksize(test, blksz); if (ret) return ret; - ret = mmc_test_transfer(test, write, buffer, addr, blocks, blksz); + ret = mmc_test_simple_transfer(test, sg, sg_len, dev_addr, + blocks, blksz, write); if (ret) return ret; if (write) { + int sectors; + ret = mmc_test_set_blksize(test, 512); if (ret) return ret; @@ -253,9 +420,9 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, memset(test->buffer, 0, sectors * 512); for (i = 0;i < sectors;i++) { - ret = mmc_test_transfer(test, 0, + ret = mmc_test_buffer_transfer(test, test->buffer + i * 512, - addr + i * 512, 1, 512); + dev_addr + i * 512, 512, 0); if (ret) return ret; } @@ -270,8 +437,11 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, return RESULT_FAIL; } } else { + local_irq_save(flags); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); for (i = 0;i < blocks * blksz;i++) { - if (buffer[i] != (u8)i) + if (test->scratch[i] != (u8)i) return RESULT_FAIL; } } @@ -279,26 +449,6 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, return 0; } -static int mmc_test_cleanup_verify(struct mmc_test_card *test) -{ - int ret, i; - - ret = mmc_test_set_blksize(test, 512); - if (ret) - return ret; - - memset(test->buffer, 0, BUFFER_SIZE); - - for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_transfer(test, 1, test->buffer + i * 512, - i * 512, 1, 512); - if (ret) - return ret; - } - - return 0; -} - /*******************************************************************/ /* Tests */ /*******************************************************************/ @@ -314,12 +464,15 @@ struct mmc_test_case { static int mmc_test_basic_write(struct mmc_test_card *test) { int ret; + struct scatterlist sg; ret = mmc_test_set_blksize(test, 512); if (ret) return ret; - ret = mmc_test_transfer(test, 1, test->buffer, 0, 1, 512); + sg_init_one(&sg, test->buffer, 512); + + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -329,12 +482,15 @@ static int mmc_test_basic_write(struct mmc_test_card *test) static int mmc_test_basic_read(struct mmc_test_card *test) { int ret; + struct scatterlist sg; ret = mmc_test_set_blksize(test, 512); if (ret) return ret; - ret = mmc_test_transfer(test, 0, test->buffer, 0, 1, 512); + sg_init_one(&sg, test->buffer, 512); + + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -344,8 +500,11 @@ static int mmc_test_basic_read(struct mmc_test_card *test) static int mmc_test_verify_write(struct mmc_test_card *test) { int ret; + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, 1, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -355,8 +514,11 @@ static int mmc_test_verify_write(struct mmc_test_card *test) static int mmc_test_verify_read(struct mmc_test_card *test) { int ret; + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, 1, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; @@ -367,6 +529,7 @@ static int mmc_test_multi_write(struct mmc_test_card *test) { int ret; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -379,8 +542,9 @@ static int mmc_test_multi_write(struct mmc_test_card *test) if (size < 1024) return RESULT_UNSUP_HOST; - ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, - size / 512, 512); + sg_init_one(&sg, test->buffer, size); + + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); if (ret) return ret; @@ -391,6 +555,7 @@ static int mmc_test_multi_read(struct mmc_test_card *test) { int ret; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -403,8 +568,9 @@ static int mmc_test_multi_read(struct mmc_test_card *test) if (size < 1024) return RESULT_UNSUP_HOST; - ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, - size / 512, 512); + sg_init_one(&sg, test->buffer, size); + + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); if (ret) return ret; @@ -414,13 +580,14 @@ static int mmc_test_multi_read(struct mmc_test_card *test) static int mmc_test_pow2_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.write_partial) return RESULT_UNSUP_CARD; for (i = 1; i < 512;i <<= 1) { - ret = mmc_test_verified_transfer(test, 1, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); if (ret) return ret; } @@ -431,13 +598,14 @@ static int mmc_test_pow2_write(struct mmc_test_card *test) static int mmc_test_pow2_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.read_partial) return RESULT_UNSUP_CARD; for (i = 1; i < 512;i <<= 1) { - ret = mmc_test_verified_transfer(test, 0, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); if (ret) return ret; } @@ -448,13 +616,14 @@ static int mmc_test_pow2_read(struct mmc_test_card *test) static int mmc_test_weird_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.write_partial) return RESULT_UNSUP_CARD; for (i = 3; i < 512;i += 7) { - ret = mmc_test_verified_transfer(test, 1, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); if (ret) return ret; } @@ -465,13 +634,14 @@ static int mmc_test_weird_write(struct mmc_test_card *test) static int mmc_test_weird_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.read_partial) return RESULT_UNSUP_CARD; for (i = 3; i < 512;i += 7) { - ret = mmc_test_verified_transfer(test, 0, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); if (ret) return ret; } @@ -482,10 +652,11 @@ static int mmc_test_weird_read(struct mmc_test_card *test) static int mmc_test_align_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 1, test->buffer + i, - 0, 1, 512); + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; } @@ -496,10 +667,11 @@ static int mmc_test_align_write(struct mmc_test_card *test) static int mmc_test_align_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 0, test->buffer + i, - 0, 1, 512); + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; } @@ -511,6 +683,7 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test) { int ret, i; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -524,8 +697,8 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test) return RESULT_UNSUP_HOST; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 1, test->buffer + i, - 0, size / 512, 512); + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); if (ret) return ret; } @@ -537,6 +710,7 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test) { int ret, i; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -550,8 +724,8 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test) return RESULT_UNSUP_HOST; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 0, test->buffer + i, - 0, size / 512, 512); + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); if (ret) return ret; } @@ -567,7 +741,7 @@ static int mmc_test_xfersize_write(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 1, 512); + ret = mmc_test_broken_transfer(test, 1, 512, 1); if (ret) return ret; @@ -582,7 +756,7 @@ static int mmc_test_xfersize_read(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 1, 512); + ret = mmc_test_broken_transfer(test, 1, 512, 0); if (ret) return ret; @@ -600,7 +774,7 @@ static int mmc_test_multi_xfersize_write(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 2, 512); + ret = mmc_test_broken_transfer(test, 2, 512, 1); if (ret) return ret; @@ -618,7 +792,7 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 2, 512); + ret = mmc_test_broken_transfer(test, 2, 512, 0); if (ret) return ret; @@ -638,86 +812,86 @@ static const struct mmc_test_case mmc_test_cases[] = { { .name = "Basic write (with data verification)", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_verify_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Basic read (with data verification)", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_verify_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Multi-block write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_multi_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Multi-block read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_multi_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Power of two block writes", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_pow2_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Power of two block reads", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_pow2_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Weird sized block writes", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_weird_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Weird sized block reads", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_weird_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_align_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_align_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned multi-block write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_align_multi_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned multi-block read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_align_multi_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { @@ -743,7 +917,7 @@ static const struct mmc_test_case mmc_test_cases[] = { static struct mutex mmc_test_lock; -static void mmc_test_run(struct mmc_test_card *test) +static void mmc_test_run(struct mmc_test_card *test, int testcase) { int i, ret; @@ -753,6 +927,9 @@ static void mmc_test_run(struct mmc_test_card *test) mmc_claim_host(test->card->host); for (i = 0;i < ARRAY_SIZE(mmc_test_cases);i++) { + if (testcase && ((i + 1) != testcase)) + continue; + printk(KERN_INFO "%s: Test case %d. %s...\n", mmc_hostname(test->card->host), i + 1, mmc_test_cases[i].name); @@ -824,9 +1001,12 @@ static ssize_t mmc_test_store(struct device *dev, { struct mmc_card *card; struct mmc_test_card *test; + int testcase; card = container_of(dev, struct mmc_card, dev); + testcase = simple_strtol(buf, NULL, 10); + test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL); if (!test) return -ENOMEM; @@ -836,7 +1016,7 @@ static ssize_t mmc_test_store(struct device *dev, test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL); if (test->buffer) { mutex_lock(&mmc_test_lock); - mmc_test_run(test); + mmc_test_run(test, testcase); mutex_unlock(&mmc_test_lock); } @@ -852,6 +1032,9 @@ static int mmc_test_probe(struct mmc_card *card) { int ret; + if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD)) + return -ENODEV; + mutex_init(&mmc_test_lock); ret = device_create_file(&card->dev, &dev_attr_test); diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index eeea84c309e6..78ad48718ab0 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -885,12 +885,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t sdio_uart_release_func(port); } -static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state) +static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) { struct sdio_uart_port *port = tty->driver_data; + int result; - if (sdio_uart_claim_func(port) != 0) - return; + result = sdio_uart_claim_func(port); + if (result != 0) + return result; if (break_state == -1) port->lcr |= UART_LCR_SBC; @@ -899,6 +901,7 @@ static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state) sdio_out(port, UART_LCR, port->lcr); sdio_uart_release_func(port); + return 0; } static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 01ced4c5a61d..3ee5b8c3b5ce 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -3,7 +3,7 @@ * * Copyright (C) 2003-2004 Russell King, All Rights Reserved. * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. - * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -295,6 +295,33 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) EXPORT_SYMBOL(mmc_set_data_timeout); /** + * mmc_align_data_size - pads a transfer size to a more optimal value + * @card: the MMC card associated with the data transfer + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * Returns the improved size, which might be unmodified. + * + * Note that this function is only relevant when issuing a + * single scatter gather entry. + */ +unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) +{ + /* + * FIXME: We don't have a system for the controller to tell + * the core about its problems yet, so for now we just 32-bit + * align the size. + */ + sz = ((sz + 3) / 4) * 4; + + return sz; +} +EXPORT_SYMBOL(mmc_align_data_size); + +/** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim * @abort: whether or not the operation should be aborted @@ -638,6 +665,9 @@ void mmc_rescan(struct work_struct *work) */ mmc_bus_put(host); + if (host->ops->get_cd && host->ops->get_cd(host) == 0) + goto out; + mmc_claim_host(host); mmc_power_up(host); @@ -652,7 +682,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_sdio(host, ocr)) mmc_power_off(host); - return; + goto out; } /* @@ -662,7 +692,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_sd(host, ocr)) mmc_power_off(host); - return; + goto out; } /* @@ -672,7 +702,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_mmc(host, ocr)) mmc_power_off(host); - return; + goto out; } mmc_release_host(host); @@ -683,6 +713,9 @@ void mmc_rescan(struct work_struct *work) mmc_bus_put(host); } +out: + if (host->caps & MMC_CAP_NEEDS_POLL) + mmc_schedule_delayed_work(&host->detect, HZ); } void mmc_start_host(struct mmc_host *host) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3da29eef8f7d..fdd7c760be8c 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -288,7 +288,7 @@ static struct device_type mmc_type = { /* * Handle the detection and initialisation of a card. * - * In the case of a resume, "curcard" will contain the card + * In the case of a resume, "oldcard" will contain the card * we're trying to reinitialise. */ static int mmc_init_card(struct mmc_host *host, u32 ocr, diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 7ef3b15c5e3d..26fc098d77cd 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -326,7 +326,7 @@ static struct device_type sd_type = { /* * Handle the detection and initialisation of a card. * - * In the case of a resume, "curcard" will contain the card + * In the case of a resume, "oldcard" will contain the card * we're trying to reinitialise. */ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, @@ -494,13 +494,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, * Check if read-only switch is active. */ if (!oldcard) { - if (!host->ops->get_ro) { + if (!host->ops->get_ro || host->ops->get_ro(host) < 0) { printk(KERN_WARNING "%s: host does not " "support reading read-only " "switch. assuming write-enable.\n", mmc_hostname(host)); } else { - if (host->ops->get_ro(host)) + if (host->ops->get_ro(host) > 0) mmc_card_set_readonly(card); } } diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index d5e51b1c7b3f..956bd7677502 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -129,6 +129,12 @@ static int cistpl_funce_func(struct sdio_func *func, /* TPLFE_MAX_BLK_SIZE */ func->max_blksize = buf[12] | (buf[13] << 8); + /* TPLFE_ENABLE_TIMEOUT_VAL, present in ver 1.1 and above */ + if (vsn > SDIO_SDIO_REV_1_00) + func->enable_timeout = (buf[28] | (buf[29] << 8)) * 10; + else + func->enable_timeout = jiffies_to_msecs(HZ); + return 0; } diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 625b92ce9cef..f61fc2d4cd0a 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/core/sdio_io.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -76,11 +76,7 @@ int sdio_enable_func(struct sdio_func *func) if (ret) goto err; - /* - * FIXME: This should timeout based on information in the CIS, - * but we don't have card to parse that yet. - */ - timeout = jiffies + HZ; + timeout = jiffies + msecs_to_jiffies(func->enable_timeout); while (1) { ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); @@ -167,10 +163,8 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) return -EINVAL; if (blksz == 0) { - blksz = min(min( - func->max_blksize, - func->card->host->max_blk_size), - 512u); + blksz = min(func->max_blksize, func->card->host->max_blk_size); + blksz = min(blksz, 512u); } ret = mmc_io_rw_direct(func->card, 1, 0, @@ -186,9 +180,116 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) func->cur_blksize = blksz; return 0; } - EXPORT_SYMBOL_GPL(sdio_set_block_size); +/* + * Calculate the maximum byte mode transfer size + */ +static inline unsigned int sdio_max_byte_size(struct sdio_func *func) +{ + unsigned mval = min(func->card->host->max_seg_size, + func->card->host->max_blk_size); + mval = min(mval, func->max_blksize); + return min(mval, 512u); /* maximum size for byte mode */ +} + +/** + * sdio_align_size - pads a transfer size to a more optimal value + * @func: SDIO function + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * If possible, it will also adjust the size so that it can be + * handled in just a single request. + * + * Returns the improved size, which might be unmodified. + */ +unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) +{ + unsigned int orig_sz; + unsigned int blk_sz, byte_sz; + unsigned chunk_sz; + + orig_sz = sz; + + /* + * Do a first check with the controller, in case it + * wants to increase the size up to a point where it + * might need more than one block. + */ + sz = mmc_align_data_size(func->card, sz); + + /* + * If we can still do this with just a byte transfer, then + * we're done. + */ + if (sz <= sdio_max_byte_size(func)) + return sz; + + if (func->card->cccr.multi_block) { + /* + * Check if the transfer is already block aligned + */ + if ((sz % func->cur_blksize) == 0) + return sz; + + /* + * Realign it so that it can be done with one request, + * and recheck if the controller still likes it. + */ + blk_sz = ((sz + func->cur_blksize - 1) / + func->cur_blksize) * func->cur_blksize; + blk_sz = mmc_align_data_size(func->card, blk_sz); + + /* + * This value is only good if it is still just + * one request. + */ + if ((blk_sz % func->cur_blksize) == 0) + return blk_sz; + + /* + * We failed to do one request, but at least try to + * pad the remainder properly. + */ + byte_sz = mmc_align_data_size(func->card, + sz % func->cur_blksize); + if (byte_sz <= sdio_max_byte_size(func)) { + blk_sz = sz / func->cur_blksize; + return blk_sz * func->cur_blksize + byte_sz; + } + } else { + /* + * We need multiple requests, so first check that the + * controller can handle the chunk size; + */ + chunk_sz = mmc_align_data_size(func->card, + sdio_max_byte_size(func)); + if (chunk_sz == sdio_max_byte_size(func)) { + /* + * Fix up the size of the remainder (if any) + */ + byte_sz = orig_sz % chunk_sz; + if (byte_sz) { + byte_sz = mmc_align_data_size(func->card, + byte_sz); + } + + return (orig_sz / chunk_sz) * chunk_sz + byte_sz; + } + } + + /* + * The controller is simply incapable of transferring the size + * we want in decent manner, so just return the original size. + */ + return orig_sz; +} +EXPORT_SYMBOL_GPL(sdio_align_size); + /* Split an arbitrarily sized data transfer into several * IO_RW_EXTENDED commands. */ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, @@ -199,14 +300,13 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, int ret; /* Do the bulk of the transfer using block mode (if supported). */ - if (func->card->cccr.multi_block) { + if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { /* Blocks per command is limited by host count, host transfer * size (we only use a single sg entry) and the maximum for * IO_RW_EXTENDED of 511 blocks. */ - max_blocks = min(min( - func->card->host->max_blk_count, - func->card->host->max_seg_size / func->cur_blksize), - 511u); + max_blocks = min(func->card->host->max_blk_count, + func->card->host->max_seg_size / func->cur_blksize); + max_blocks = min(max_blocks, 511u); while (remainder > func->cur_blksize) { unsigned blocks; @@ -231,11 +331,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, /* Write the remainder using byte mode. */ while (remainder > 0) { - size = remainder; - if (size > func->cur_blksize) - size = func->cur_blksize; - if (size > 512) - size = 512; /* maximum size for byte mode */ + size = min(remainder, sdio_max_byte_size(func)); ret = mmc_io_rw_extended(func->card, write, func->num, addr, incr_addr, buf, 1, size); @@ -260,11 +356,10 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, * function. If there is a problem reading the address, 0xff * is returned and @err_ret will contain the error code. */ -unsigned char sdio_readb(struct sdio_func *func, unsigned int addr, - int *err_ret) +u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; - unsigned char val; + u8 val; BUG_ON(!func); @@ -293,8 +388,7 @@ EXPORT_SYMBOL_GPL(sdio_readb); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, - int *err_ret) +void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret) { int ret; @@ -355,7 +449,6 @@ int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, { return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); } - EXPORT_SYMBOL_GPL(sdio_readsb); /** @@ -385,8 +478,7 @@ EXPORT_SYMBOL_GPL(sdio_writesb); * function. If there is a problem reading the address, 0xffff * is returned and @err_ret will contain the error code. */ -unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, - int *err_ret) +u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -400,7 +492,7 @@ unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, return 0xFFFF; } - return le16_to_cpu(*(u16*)func->tmpbuf); + return le16_to_cpup((__le16 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readw); @@ -415,12 +507,11 @@ EXPORT_SYMBOL_GPL(sdio_readw); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr, - int *err_ret) +void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret) { int ret; - *(u16*)func->tmpbuf = cpu_to_le16(b); + *(__le16 *)func->tmpbuf = cpu_to_le16(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); if (err_ret) @@ -439,8 +530,7 @@ EXPORT_SYMBOL_GPL(sdio_writew); * 0xffffffff is returned and @err_ret will contain the error * code. */ -unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, - int *err_ret) +u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -454,7 +544,7 @@ unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, return 0xFFFFFFFF; } - return le32_to_cpu(*(u32*)func->tmpbuf); + return le32_to_cpup((__le32 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readl); @@ -469,12 +559,11 @@ EXPORT_SYMBOL_GPL(sdio_readl); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr, - int *err_ret) +void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret) { int ret; - *(u32*)func->tmpbuf = cpu_to_le32(b); + *(__le32 *)func->tmpbuf = cpu_to_le32(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); if (err_ret) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dead61754ad7..dc6f2579f85c 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -26,18 +26,31 @@ config MMC_PXA config MMC_SDHCI tristate "Secure Digital Host Controller Interface support" - depends on PCI + depends on HAS_DMA help - This select the generic Secure Digital Host Controller Interface. + This selects the generic Secure Digital Host Controller Interface. It is used by manufacturers such as Texas Instruments(R), Ricoh(R) and Toshiba(R). Most controllers found in laptops are of this type. + + If you have a controller with this interface, say Y or M here. You + also need to enable an appropriate bus interface. + + If unsure, say N. + +config MMC_SDHCI_PCI + tristate "SDHCI support on PCI bus" + depends on MMC_SDHCI && PCI + help + This selects the PCI Secure Digital Host Controller Interface. + Most controllers found today are PCI devices. + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_RICOH_MMC tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL && MMC_SDHCI + depends on MMC_SDHCI_PCI help This selects the disabler for the Ricoh MMC Controller. This proprietary controller is unnecessary because the SDHCI driver @@ -91,6 +104,16 @@ config MMC_AT91 If unsure, say N. +config MMC_ATMELMCI + tristate "Atmel Multimedia Card Interface support" + depends on AVR32 + help + This selects the Atmel Multimedia Card Interface driver. If + you have an AT32 (AVR32) platform with a Multimedia Card + slot, say Y or M here. + + If unsure, say N. + config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" depends on ARCH_IMX @@ -130,3 +153,24 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. +config MMC_S3C + tristate "Samsung S3C SD/MMC Card Interface support" + depends on ARCH_S3C2410 && MMC + help + This selects a driver for the MCI interface found in + Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. + If you have a board based on one of those and a MMC/SD + slot, say Y or M here. + + If unsure, say N. + +config MMC_SDRICOH_CS + tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" + depends on EXPERIMENTAL && MMC && PCI && PCMCIA + help + Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA + card whenever you insert a MMC or SD card into the card slot. + + To compile this driver as a module, choose M here: the + module will be called sdricoh_cs. + diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3877c87e6da2..db52eebfb50e 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -10,11 +10,15 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o +obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o +obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o +obj-$(CONFIG_MMC_S3C) += s3cmci.o +obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 8979ad330a4d..f15e2064305c 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -125,9 +125,72 @@ struct at91mci_host /* Latest in the scatterlist that has been enabled for transfer */ int transfer_index; + + /* Timer for timeouts */ + struct timer_list timer; }; /* + * Reset the controller and restore most of the state + */ +static void at91_reset_host(struct at91mci_host *host) +{ + unsigned long flags; + u32 mr; + u32 sdcr; + u32 dtor; + u32 imr; + + local_irq_save(flags); + imr = at91_mci_read(host, AT91_MCI_IMR); + + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + + /* save current state */ + mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; + sdcr = at91_mci_read(host, AT91_MCI_SDCR); + dtor = at91_mci_read(host, AT91_MCI_DTOR); + + /* reset the controller */ + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); + + /* restore state */ + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); + at91_mci_write(host, AT91_MCI_MR, mr); + at91_mci_write(host, AT91_MCI_SDCR, sdcr); + at91_mci_write(host, AT91_MCI_DTOR, dtor); + at91_mci_write(host, AT91_MCI_IER, imr); + + /* make sure sdio interrupts will fire */ + at91_mci_read(host, AT91_MCI_SR); + + local_irq_restore(flags); +} + +static void at91_timeout_timer(unsigned long data) +{ + struct at91mci_host *host; + + host = (struct at91mci_host *)data; + + if (host->request) { + dev_err(host->mmc->parent, "Timeout waiting end of packet\n"); + + if (host->cmd && host->cmd->data) { + host->cmd->data->error = -ETIMEDOUT; + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->request->cmd->error = -ETIMEDOUT; + } + + at91_reset_host(host); + mmc_request_done(host->mmc, host->request); + } +} + +/* * Copy from sg to a dma block - used for transfers */ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data) @@ -135,9 +198,14 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data unsigned int len, i, size; unsigned *dmabuf = host->buffer; - size = host->total_length; + size = data->blksz * data->blocks; len = data->sg_len; + /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ + if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + /* * Just loop through all entries. Size might not * be the entire list though so make sure that @@ -159,9 +227,10 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data for (index = 0; index < (amount / 4); index++) *dmabuf++ = swab32(sgbuffer[index]); - } - else + } else { memcpy(dmabuf, sgbuffer, amount); + dmabuf += amount; + } kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); @@ -233,11 +302,11 @@ static void at91_mci_pre_dma_read(struct at91mci_host *host) if (i == 0) { at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address); - at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); } else { at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address); - at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); } } @@ -277,8 +346,6 @@ static void at91_mci_post_dma_read(struct at91mci_host *host) dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE); - data->bytes_xfered += sg->length; - if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ unsigned int *buffer; int index; @@ -294,6 +361,8 @@ static void at91_mci_post_dma_read(struct at91mci_host *host) } flush_dcache_page(sg_page(sg)); + + data->bytes_xfered += sg->length; } /* Is there another transfer to trigger? */ @@ -334,10 +403,32 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); } else at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); +} + +/* + * Update bytes tranfered count during a write operation + */ +static void at91_mci_update_bytes_xfered(struct at91mci_host *host) +{ + struct mmc_data *data; + + /* always deal with the effective request (and not the current cmd) */ + + if (host->request->cmd && host->request->cmd->error != 0) + return; - data->bytes_xfered = host->total_length; + if (host->request->data) { + data = host->request->data; + if (data->flags & MMC_DATA_WRITE) { + /* card is in IDLE mode now */ + pr_debug("-> bytes_xfered %d, total_length = %d\n", + data->bytes_xfered, host->total_length); + data->bytes_xfered = data->blksz * data->blocks; + } + } } + /*Handle after command sent ready*/ static int at91_mci_handle_cmdrdy(struct at91mci_host *host) { @@ -350,8 +441,7 @@ static int at91_mci_handle_cmdrdy(struct at91mci_host *host) } else return 1; } else if (host->cmd->data->flags & MMC_DATA_WRITE) { /*After sendding multi-block-write command, start DMA transfer*/ - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE); - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE); at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); } @@ -430,11 +520,19 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command if (data) { - if ( data->blksz & 0x3 ) { - pr_debug("Unsupported block size\n"); - cmd->error = -EINVAL; - mmc_request_done(host->mmc, host->request); - return; + if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) { + if (data->blksz & 0x3) { + pr_debug("Unsupported block size\n"); + cmd->error = -EINVAL; + mmc_request_done(host->mmc, host->request); + return; + } + if (data->flags & MMC_DATA_STREAM) { + pr_debug("Stream commands not supported\n"); + cmd->error = -EINVAL; + mmc_request_done(host->mmc, host->request); + return; + } } block_length = data->blksz; @@ -481,8 +579,16 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command ier = AT91_MCI_CMDRDY; } else { /* zero block length and PDC mode */ - mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; - at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE); + mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff; + mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0; + mr |= (block_length << 16); + mr |= AT91_MCI_PDCMODE; + at91_mci_write(host, AT91_MCI_MR, mr); + + if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261())) + at91_mci_write(host, AT91_MCI_BLKR, + AT91_MCI_BLKR_BCNT(blocks) | + AT91_MCI_BLKR_BLKLEN(block_length)); /* * Disable the PDC controller @@ -508,6 +614,13 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command * Handle a write */ host->total_length = block_length * blocks; + /* + * AT91SAM926[0/3] Data Write Operation and + * number of bytes erratum + */ + if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) + if (host->total_length < 12) + host->total_length = 12; host->buffer = dma_alloc_coherent(NULL, host->total_length, &host->physical_address, GFP_KERNEL); @@ -517,7 +630,9 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command pr_debug("Transmitting %d bytes\n", host->total_length); at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); - at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); + at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ? + host->total_length : host->total_length / 4); + ier = AT91_MCI_CMDRDY; } } @@ -552,20 +667,26 @@ static void at91_mci_process_next(struct at91mci_host *host) else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { host->flags |= FL_SENT_STOP; at91_mci_send_command(host, host->request->stop); - } - else + } else { + del_timer(&host->timer); + /* the at91rm9200 mci controller hangs after some transfers, + * and the workaround is to reset it after each transfer. + */ + if (cpu_is_at91rm9200()) + at91_reset_host(host); mmc_request_done(host->mmc, host->request); + } } /* * Handle a command that has been completed */ -static void at91_mci_completed_command(struct at91mci_host *host) +static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status) { struct mmc_command *cmd = host->cmd; - unsigned int status; + struct mmc_data *data = cmd->data; - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0)); cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1)); @@ -577,25 +698,34 @@ static void at91_mci_completed_command(struct at91mci_host *host) host->buffer = NULL; } - status = at91_mci_read(host, AT91_MCI_SR); - - pr_debug("Status = %08X [%08X %08X %08X %08X]\n", - status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); + pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n", + status, at91_mci_read(host, AT91_MCI_SR), + cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); if (status & AT91_MCI_ERRORS) { if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { cmd->error = 0; } else { - if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE)) - cmd->error = -ETIMEDOUT; - else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE)) - cmd->error = -EILSEQ; - else - cmd->error = -EIO; + if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) { + if (data) { + if (status & AT91_MCI_DTOE) + data->error = -ETIMEDOUT; + else if (status & AT91_MCI_DCRCE) + data->error = -EILSEQ; + } + } else { + if (status & AT91_MCI_RTOE) + cmd->error = -ETIMEDOUT; + else if (status & AT91_MCI_RCRCE) + cmd->error = -EILSEQ; + else + cmd->error = -EIO; + } - pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n", - cmd->error, cmd->opcode, cmd->retries); + pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n", + cmd->error, data ? data->error : 0, + cmd->opcode, cmd->retries); } } else @@ -613,6 +743,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->request = mrq; host->flags = 0; + mod_timer(&host->timer, jiffies + HZ); + at91_mci_process_next(host); } @@ -736,6 +868,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (int_status & AT91_MCI_NOTBUSY) { pr_debug("Card is ready\n"); + at91_mci_update_bytes_xfered(host); completed = 1; } @@ -744,9 +877,21 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (int_status & AT91_MCI_BLKE) { pr_debug("Block transfer has ended\n"); - completed = 1; + if (host->request->data && host->request->data->blocks > 1) { + /* multi block write : complete multi write + * command and send stop */ + completed = 1; + } else { + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); + } } + if (int_status & AT91_MCI_SDIOIRQA) + mmc_signal_sdio_irq(host->mmc); + + if (int_status & AT91_MCI_SDIOIRQB) + mmc_signal_sdio_irq(host->mmc); + if (int_status & AT91_MCI_TXRDY) pr_debug("Ready to transmit\n"); @@ -761,10 +906,10 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (completed) { pr_debug("Completed command\n"); - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); - at91_mci_completed_command(host); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); + at91_mci_completed_command(host, int_status); } else - at91_mci_write(host, AT91_MCI_IDR, int_status); + at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); return IRQ_HANDLED; } @@ -793,25 +938,33 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host) static int at91_mci_get_ro(struct mmc_host *mmc) { - int read_only = 0; struct at91mci_host *host = mmc_priv(mmc); - if (host->board->wp_pin) { - read_only = gpio_get_value(host->board->wp_pin); - printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc), - (read_only ? "read-only" : "read-write") ); - } - else { - printk(KERN_WARNING "%s: host does not support reading read-only " - "switch. Assuming write-enable.\n", mmc_hostname(mmc)); - } - return read_only; + if (host->board->wp_pin) + return !!gpio_get_value(host->board->wp_pin); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; +} + +static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct at91mci_host *host = mmc_priv(mmc); + + pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc), + host->board->slot_b ? 'B':'A', enable ? "enable" : "disable"); + at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR, + host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA); + } static const struct mmc_host_ops at91_mci_ops = { .request = at91_mci_request, .set_ios = at91_mci_set_ios, .get_ro = at91_mci_get_ro, + .enable_sdio_irq = at91_mci_enable_sdio_irq, }; /* @@ -842,6 +995,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_SDIO_IRQ; mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; @@ -935,6 +1089,8 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc_add_host(mmc); + setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host); + /* * monitor card insertion/removal if we can */ @@ -995,6 +1151,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev) } at91_mci_disable(host); + del_timer_sync(&host->timer); mmc_remove_host(mmc); free_irq(host->irq, host); diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h new file mode 100644 index 000000000000..a9a5657706c6 --- /dev/null +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -0,0 +1,91 @@ +/* + * Atmel MultiMedia Card Interface driver + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ +#define __DRIVERS_MMC_ATMEL_MCI_H__ + +/* MCI Register Definitions */ +#define MCI_CR 0x0000 /* Control */ +# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ +# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ +# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ +#define MCI_MR 0x0004 /* Mode */ +# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ +# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ +# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ +#define MCI_DTOR 0x0008 /* Data Timeout */ +# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ +# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ +#define MCI_SDCR 0x000c /* SD Card / SDIO */ +# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ +# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ +# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */ +# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */ +#define MCI_ARGR 0x0010 /* Command Argument */ +#define MCI_CMDR 0x0014 /* Command */ +# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ +# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ +# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ +# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ +# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ +# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ +# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ +# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ +# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ +# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ +# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ +# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ +# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ +# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ +# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ +# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ +# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ +# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ +# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ +# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ +# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ +# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ +#define MCI_BLKR 0x0018 /* Block */ +# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ +# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define MCI_RSPR 0x0020 /* Response 0 */ +#define MCI_RSPR1 0x0024 /* Response 1 */ +#define MCI_RSPR2 0x0028 /* Response 2 */ +#define MCI_RSPR3 0x002c /* Response 3 */ +#define MCI_RDR 0x0030 /* Receive Data */ +#define MCI_TDR 0x0034 /* Transmit Data */ +#define MCI_SR 0x0040 /* Status */ +#define MCI_IER 0x0044 /* Interrupt Enable */ +#define MCI_IDR 0x0048 /* Interrupt Disable */ +#define MCI_IMR 0x004c /* Interrupt Mask */ +# define MCI_CMDRDY ( 1 << 0) /* Command Ready */ +# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */ +# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */ +# define MCI_BLKE ( 1 << 3) /* Data Block Ended */ +# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ +# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ +# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ +# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ +# define MCI_RINDE ( 1 << 16) /* Response Index Error */ +# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */ +# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */ +# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */ +# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */ +# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */ +# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ +# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ +# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ + +/* Register access macros */ +#define mci_readl(port,reg) \ + __raw_readl((port)->regs + MCI_##reg) +#define mci_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + MCI_##reg) + +#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c new file mode 100644 index 000000000000..cce873c5a149 --- /dev/null +++ b/drivers/mmc/host/atmel-mci.c @@ -0,0 +1,981 @@ +/* + * Atmel MultiMedia Card Interface driver + * + * Copyright (C) 2004-2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/blkdev.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/mmc/host.h> + +#include <asm/atmel-mci.h> +#include <asm/io.h> +#include <asm/unaligned.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "atmel-mci-regs.h" + +#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) + +enum { + EVENT_CMD_COMPLETE = 0, + EVENT_DATA_ERROR, + EVENT_DATA_COMPLETE, + EVENT_STOP_SENT, + EVENT_STOP_COMPLETE, + EVENT_XFER_COMPLETE, +}; + +struct atmel_mci { + struct mmc_host *mmc; + void __iomem *regs; + + struct scatterlist *sg; + unsigned int pio_offset; + + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + u32 cmd_status; + u32 data_status; + u32 stop_status; + u32 stop_cmdr; + + u32 mode_reg; + u32 sdc_reg; + + struct tasklet_struct tasklet; + unsigned long pending_events; + unsigned long completed_events; + + int present; + int detect_pin; + int wp_pin; + + /* For detect pin debouncing */ + struct timer_list detect_timer; + + unsigned long bus_hz; + unsigned long mapbase; + struct clk *mck; + struct platform_device *pdev; +}; + +#define atmci_is_completed(host, event) \ + test_bit(event, &host->completed_events) +#define atmci_test_and_clear_pending(host, event) \ + test_and_clear_bit(event, &host->pending_events) +#define atmci_test_and_set_completed(host, event) \ + test_and_set_bit(event, &host->completed_events) +#define atmci_set_completed(host, event) \ + set_bit(event, &host->completed_events) +#define atmci_set_pending(host, event) \ + set_bit(event, &host->pending_events) +#define atmci_clear_pending(host, event) \ + clear_bit(event, &host->pending_events) + + +static void atmci_enable(struct atmel_mci *host) +{ + clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + mci_writel(host, SDCR, host->sdc_reg); +} + +static void atmci_disable(struct atmel_mci *host) +{ + mci_writel(host, CR, MCI_CR_SWRST); + + /* Stall until write is complete, then disable the bus clock */ + mci_readl(host, SR); + clk_disable(host->mck); +} + +static inline unsigned int ns_to_clocks(struct atmel_mci *host, + unsigned int ns) +{ + return (ns * (host->bus_hz / 1000000) + 999) / 1000; +} + +static void atmci_set_timeout(struct atmel_mci *host, + struct mmc_data *data) +{ + static unsigned dtomul_to_shift[] = { + 0, 4, 7, 8, 10, 12, 16, 20 + }; + unsigned timeout; + unsigned dtocyc; + unsigned dtomul; + + timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; + + for (dtomul = 0; dtomul < 8; dtomul++) { + unsigned shift = dtomul_to_shift[dtomul]; + dtocyc = (timeout + (1 << shift) - 1) >> shift; + if (dtocyc < 15) + break; + } + + if (dtomul >= 8) { + dtomul = 7; + dtocyc = 15; + } + + dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", + dtocyc << dtomul_to_shift[dtomul]); + mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); +} + +/* + * Return mask with command flags to be enabled for this command. + */ +static u32 atmci_prepare_command(struct mmc_host *mmc, + struct mmc_command *cmd) +{ + struct mmc_data *data; + u32 cmdr; + + cmd->error = -EINPROGRESS; + + cmdr = MCI_CMDR_CMDNB(cmd->opcode); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + cmdr |= MCI_CMDR_RSPTYP_136BIT; + else + cmdr |= MCI_CMDR_RSPTYP_48BIT; + } + + /* + * This should really be MAXLAT_5 for CMD2 and ACMD41, but + * it's too difficult to determine whether this is an ACMD or + * not. Better make it 64. + */ + cmdr |= MCI_CMDR_MAXLAT_64CYC; + + if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) + cmdr |= MCI_CMDR_OPDCMD; + + data = cmd->data; + if (data) { + cmdr |= MCI_CMDR_START_XFER; + if (data->flags & MMC_DATA_STREAM) + cmdr |= MCI_CMDR_STREAM; + else if (data->blocks > 1) + cmdr |= MCI_CMDR_MULTI_BLOCK; + else + cmdr |= MCI_CMDR_BLOCK; + + if (data->flags & MMC_DATA_READ) + cmdr |= MCI_CMDR_TRDIR_READ; + } + + return cmdr; +} + +static void atmci_start_command(struct atmel_mci *host, + struct mmc_command *cmd, + u32 cmd_flags) +{ + /* Must read host->cmd after testing event flags */ + smp_rmb(); + WARN_ON(host->cmd); + host->cmd = cmd; + + dev_vdbg(&host->mmc->class_dev, + "start command: ARGR=0x%08x CMDR=0x%08x\n", + cmd->arg, cmd_flags); + + mci_writel(host, ARGR, cmd->arg); + mci_writel(host, CMDR, cmd_flags); +} + +static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) +{ + struct atmel_mci *host = mmc_priv(mmc); + + atmci_start_command(host, data->stop, host->stop_cmdr); + mci_writel(host, IER, MCI_CMDRDY); +} + +static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci *host = mmc_priv(mmc); + + WARN_ON(host->cmd || host->data); + host->mrq = NULL; + + atmci_disable(host); + + mmc_request_done(mmc, mrq); +} + +/* + * Returns a mask of interrupt flags to be enabled after the whole + * request has been prepared. + */ +static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) +{ + struct atmel_mci *host = mmc_priv(mmc); + u32 iflags; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + mci_writel(host, BLKR, MCI_BCNT(data->blocks) + | MCI_BLKLEN(data->blksz)); + dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", + MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + + iflags = ATMCI_DATA_ERROR_FLAGS; + host->sg = data->sg; + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= MCI_RXRDY; + else + iflags |= MCI_TXRDY; + + return iflags; +} + +static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci *host = mmc_priv(mmc); + struct mmc_data *data; + struct mmc_command *cmd; + u32 iflags; + u32 cmdflags = 0; + + iflags = mci_readl(host, IMR); + if (iflags) + dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", + mci_readl(host, IMR)); + + WARN_ON(host->mrq != NULL); + + /* + * We may "know" the card is gone even though there's still an + * electrical connection. If so, we really need to communicate + * this to the MMC core since there won't be any more + * interrupts as the card is completely removed. Otherwise, + * the MMC core might believe the card is still there even + * though the card was just removed very slowly. + */ + if (!host->present) { + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + host->mrq = mrq; + host->pending_events = 0; + host->completed_events = 0; + + atmci_enable(host); + + /* We don't support multiple blocks of weird lengths. */ + data = mrq->data; + if (data) { + if (data->blocks > 1 && data->blksz & 3) + goto fail; + atmci_set_timeout(host, data); + } + + iflags = MCI_CMDRDY; + cmd = mrq->cmd; + cmdflags = atmci_prepare_command(mmc, cmd); + atmci_start_command(host, cmd, cmdflags); + + if (data) + iflags |= atmci_submit_data(mmc, data); + + if (mrq->stop) { + host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); + host->stop_cmdr |= MCI_CMDR_STOP_XFER; + if (!(data->flags & MMC_DATA_WRITE)) + host->stop_cmdr |= MCI_CMDR_TRDIR_READ; + if (data->flags & MMC_DATA_STREAM) + host->stop_cmdr |= MCI_CMDR_STREAM; + else + host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK; + } + + /* + * We could have enabled interrupts earlier, but I suspect + * that would open up a nice can of interesting race + * conditions (e.g. command and data complete, but stop not + * prepared yet.) + */ + mci_writel(host, IER, iflags); + + return; + +fail: + atmci_disable(host); + host->mrq = NULL; + mrq->cmd->error = -EINVAL; + mmc_request_done(mmc, mrq); +} + +static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct atmel_mci *host = mmc_priv(mmc); + + if (ios->clock) { + u32 clkdiv; + + /* Set clock rate */ + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; + if (clkdiv > 255) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + ios->clock, host->bus_hz / (2 * 256)); + clkdiv = 255; + } + + host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF + | MCI_MR_RDPROOF; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + host->sdc_reg = 0; + break; + case MMC_BUS_WIDTH_4: + host->sdc_reg = MCI_SDCBUS_4BIT; + break; + } + + switch (ios->power_mode) { + case MMC_POWER_ON: + /* Send init sequence (74 clock cycles) */ + atmci_enable(host); + mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); + while (!(mci_readl(host, SR) & MCI_CMDRDY)) + cpu_relax(); + atmci_disable(host); + break; + default: + /* + * TODO: None of the currently available AVR32-based + * boards allow MMC power to be turned off. Implement + * power control when this can be tested properly. + */ + break; + } +} + +static int atmci_get_ro(struct mmc_host *mmc) +{ + int read_only = 0; + struct atmel_mci *host = mmc_priv(mmc); + + if (host->wp_pin >= 0) { + read_only = gpio_get_value(host->wp_pin); + dev_dbg(&mmc->class_dev, "card is %s\n", + read_only ? "read-only" : "read-write"); + } else { + dev_dbg(&mmc->class_dev, + "no pin for checking read-only switch." + " Assuming write-enable.\n"); + } + + return read_only; +} + +static struct mmc_host_ops atmci_ops = { + .request = atmci_request, + .set_ios = atmci_set_ios, + .get_ro = atmci_get_ro, +}; + +static void atmci_command_complete(struct atmel_mci *host, + struct mmc_command *cmd, u32 status) +{ + /* Read the response from the card (up to 16 bytes) */ + cmd->resp[0] = mci_readl(host, RSPR); + cmd->resp[1] = mci_readl(host, RSPR); + cmd->resp[2] = mci_readl(host, RSPR); + cmd->resp[3] = mci_readl(host, RSPR); + + if (status & MCI_RTOE) + cmd->error = -ETIMEDOUT; + else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE)) + cmd->error = -EILSEQ; + else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE)) + cmd->error = -EIO; + else + cmd->error = 0; + + if (cmd->error) { + dev_dbg(&host->mmc->class_dev, + "command error: status=0x%08x\n", status); + + if (cmd->data) { + host->data = NULL; + mci_writel(host, IDR, MCI_NOTBUSY + | MCI_TXRDY | MCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + } + } +} + +static void atmci_detect_change(unsigned long data) +{ + struct atmel_mci *host = (struct atmel_mci *)data; + struct mmc_request *mrq = host->mrq; + int present; + + /* + * atmci_remove() sets detect_pin to -1 before freeing the + * interrupt. We must not re-enable the interrupt if it has + * been freed. + */ + smp_rmb(); + if (host->detect_pin < 0) + return; + + enable_irq(gpio_to_irq(host->detect_pin)); + present = !gpio_get_value(host->detect_pin); + + dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", + present, host->present); + + if (present != host->present) { + dev_dbg(&host->mmc->class_dev, "card %s\n", + present ? "inserted" : "removed"); + host->present = present; + + /* Reset controller if card is gone */ + if (!present) { + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIEN); + } + + /* Clean up queue if present */ + if (mrq) { + /* + * Reset controller to terminate any ongoing + * commands or data transfers. + */ + mci_writel(host, CR, MCI_CR_SWRST); + + if (!atmci_is_completed(host, EVENT_CMD_COMPLETE)) + mrq->cmd->error = -ENOMEDIUM; + + if (mrq->data && !atmci_is_completed(host, + EVENT_DATA_COMPLETE)) { + host->data = NULL; + mrq->data->error = -ENOMEDIUM; + } + if (mrq->stop && !atmci_is_completed(host, + EVENT_STOP_COMPLETE)) + mrq->stop->error = -ENOMEDIUM; + + host->cmd = NULL; + atmci_request_end(host->mmc, mrq); + } + + mmc_detect_change(host->mmc, 0); + } +} + +static void atmci_tasklet_func(unsigned long priv) +{ + struct mmc_host *mmc = (struct mmc_host *)priv; + struct atmel_mci *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = host->data; + + dev_vdbg(&mmc->class_dev, + "tasklet: pending/completed/mask %lx/%lx/%x\n", + host->pending_events, host->completed_events, + mci_readl(host, IMR)); + + if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) { + /* + * host->cmd must be set to NULL before the interrupt + * handler sees EVENT_CMD_COMPLETE + */ + host->cmd = NULL; + smp_wmb(); + atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_command_complete(host, mrq->cmd, host->cmd_status); + + if (!mrq->cmd->error && mrq->stop + && atmci_is_completed(host, EVENT_XFER_COMPLETE) + && !atmci_test_and_set_completed(host, + EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, mrq->data); + } + if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) { + /* + * host->cmd must be set to NULL before the interrupt + * handler sees EVENT_STOP_COMPLETE + */ + host->cmd = NULL; + smp_wmb(); + atmci_set_completed(host, EVENT_STOP_COMPLETE); + atmci_command_complete(host, mrq->stop, host->stop_status); + } + if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { + u32 status = host->data_status; + + dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status); + + atmci_set_completed(host, EVENT_DATA_ERROR); + atmci_set_completed(host, EVENT_DATA_COMPLETE); + + if (status & MCI_DTOE) { + dev_dbg(&mmc->class_dev, + "data timeout error\n"); + data->error = -ETIMEDOUT; + } else if (status & MCI_DCRCE) { + dev_dbg(&mmc->class_dev, "data CRC error\n"); + data->error = -EILSEQ; + } else { + dev_dbg(&mmc->class_dev, + "data FIFO error (status=%08x)\n", + status); + data->error = -EIO; + } + + if (host->present && data->stop + && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed( + host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); + + host->data = NULL; + } + if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) { + atmci_set_completed(host, EVENT_DATA_COMPLETE); + + if (!atmci_is_completed(host, EVENT_DATA_ERROR)) { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + host->data = NULL; + } + + if (host->mrq && !host->cmd && !host->data) + atmci_request_end(mmc, host->mrq); +} + +static void atmci_read_data_pio(struct atmel_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + u32 value; + u32 status; + unsigned int nbytes = 0; + + do { + value = mci_readl(host, RDR); + if (likely(offset + 4 <= sg->length)) { + put_unaligned(value, (u32 *)(buf + offset)); + + offset += 4; + nbytes += 4; + + if (offset == sg->length) { + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + memcpy(buf + offset, &value, remaining); + nbytes += remaining; + + flush_dcache_page(sg_page(sg)); + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 4 - remaining; + buf = sg_virt(sg); + memcpy(buf, (u8 *)&value + remaining, offset); + nbytes += offset; + } + + status = mci_readl(host, SR); + if (status & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS)); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + break; + } + } while (status & MCI_RXRDY); + + host->pio_offset = offset; + data->bytes_xfered += nbytes; + + return; + +done: + mci_writel(host, IDR, MCI_RXRDY); + mci_writel(host, IER, MCI_NOTBUSY); + data->bytes_xfered += nbytes; + atmci_set_completed(host, EVENT_XFER_COMPLETE); + if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); +} + +static void atmci_write_data_pio(struct atmel_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + u32 value; + u32 status; + unsigned int nbytes = 0; + + do { + if (likely(offset + 4 <= sg->length)) { + value = get_unaligned((u32 *)(buf + offset)); + mci_writel(host, TDR, value); + + offset += 4; + nbytes += 4; + if (offset == sg->length) { + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + + value = 0; + memcpy(&value, buf + offset, remaining); + nbytes += remaining; + + host->sg = sg = sg_next(sg); + if (!sg) { + mci_writel(host, TDR, value); + goto done; + } + + offset = 4 - remaining; + buf = sg_virt(sg); + memcpy((u8 *)&value + remaining, buf, offset); + mci_writel(host, TDR, value); + nbytes += offset; + } + + status = mci_readl(host, SR); + if (status & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY + | ATMCI_DATA_ERROR_FLAGS)); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + break; + } + } while (status & MCI_TXRDY); + + host->pio_offset = offset; + data->bytes_xfered += nbytes; + + return; + +done: + mci_writel(host, IDR, MCI_TXRDY); + mci_writel(host, IER, MCI_NOTBUSY); + data->bytes_xfered += nbytes; + atmci_set_completed(host, EVENT_XFER_COMPLETE); + if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); +} + +static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) +{ + struct atmel_mci *host = mmc_priv(mmc); + + mci_writel(host, IDR, MCI_CMDRDY); + + if (atmci_is_completed(host, EVENT_STOP_SENT)) { + host->stop_status = status; + atmci_set_pending(host, EVENT_STOP_COMPLETE); + } else { + host->cmd_status = status; + atmci_set_pending(host, EVENT_CMD_COMPLETE); + } + + tasklet_schedule(&host->tasklet); +} + +static irqreturn_t atmci_interrupt(int irq, void *dev_id) +{ + struct mmc_host *mmc = dev_id; + struct atmel_mci *host = mmc_priv(mmc); + u32 status, mask, pending; + unsigned int pass_count = 0; + + spin_lock(&mmc->lock); + + do { + status = mci_readl(host, SR); + mask = mci_readl(host, IMR); + pending = status & mask; + if (!pending) + break; + + if (pending & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS + | MCI_RXRDY | MCI_TXRDY); + pending &= mci_readl(host, IMR); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + } + if (pending & MCI_NOTBUSY) { + mci_writel(host, IDR, (MCI_NOTBUSY + | ATMCI_DATA_ERROR_FLAGS)); + atmci_set_pending(host, EVENT_DATA_COMPLETE); + tasklet_schedule(&host->tasklet); + } + if (pending & MCI_RXRDY) + atmci_read_data_pio(host); + if (pending & MCI_TXRDY) + atmci_write_data_pio(host); + + if (pending & MCI_CMDRDY) + atmci_cmd_interrupt(mmc, status); + } while (pass_count++ < 5); + + spin_unlock(&mmc->lock); + + return pass_count ? IRQ_HANDLED : IRQ_NONE; +} + +static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) +{ + struct mmc_host *mmc = dev_id; + struct atmel_mci *host = mmc_priv(mmc); + + /* + * Disable interrupts until the pin has stabilized and check + * the state then. Use mod_timer() since we may be in the + * middle of the timer routine when this interrupt triggers. + */ + disable_irq_nosync(irq); + mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); + + return IRQ_HANDLED; +} + +static int __init atmci_probe(struct platform_device *pdev) +{ + struct mci_platform_data *pdata; + struct atmel_mci *host; + struct mmc_host *mmc; + struct resource *regs; + int irq; + int ret; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENXIO; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->pdev = pdev; + host->mmc = mmc; + host->detect_pin = pdata->detect_pin; + host->wp_pin = pdata->wp_pin; + + host->mck = clk_get(&pdev->dev, "mci_clk"); + if (IS_ERR(host->mck)) { + ret = PTR_ERR(host->mck); + goto err_clk_get; + } + + ret = -ENOMEM; + host->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!host->regs) + goto err_ioremap; + + clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_SWRST); + host->bus_hz = clk_get_rate(host->mck); + clk_disable(host->mck); + + host->mapbase = regs->start; + + mmc->ops = &atmci_ops; + mmc->f_min = (host->bus_hz + 511) / 512; + mmc->f_max = host->bus_hz / 2; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps |= MMC_CAP_4_BIT_DATA; + + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + + tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); + + ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); + if (ret) + goto err_request_irq; + + /* Assume card is present if we don't have a detect pin */ + host->present = 1; + if (host->detect_pin >= 0) { + if (gpio_request(host->detect_pin, "mmc_detect")) { + dev_dbg(&mmc->class_dev, "no detect pin available\n"); + host->detect_pin = -1; + } else { + host->present = !gpio_get_value(host->detect_pin); + } + } + if (host->wp_pin >= 0) { + if (gpio_request(host->wp_pin, "mmc_wp")) { + dev_dbg(&mmc->class_dev, "no WP pin available\n"); + host->wp_pin = -1; + } + } + + platform_set_drvdata(pdev, host); + + mmc_add_host(mmc); + + if (host->detect_pin >= 0) { + setup_timer(&host->detect_timer, atmci_detect_change, + (unsigned long)host); + + ret = request_irq(gpio_to_irq(host->detect_pin), + atmci_detect_interrupt, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-detect", mmc); + if (ret) { + dev_dbg(&mmc->class_dev, + "could not request IRQ %d for detect pin\n", + gpio_to_irq(host->detect_pin)); + gpio_free(host->detect_pin); + host->detect_pin = -1; + } + } + + dev_info(&mmc->class_dev, + "Atmel MCI controller at 0x%08lx irq %d\n", + host->mapbase, irq); + + return 0; + +err_request_irq: + iounmap(host->regs); +err_ioremap: + clk_put(host->mck); +err_clk_get: + mmc_free_host(mmc); + return ret; +} + +static int __exit atmci_remove(struct platform_device *pdev) +{ + struct atmel_mci *host = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (host) { + if (host->detect_pin >= 0) { + int pin = host->detect_pin; + + /* Make sure the timer doesn't enable the interrupt */ + host->detect_pin = -1; + smp_wmb(); + + free_irq(gpio_to_irq(pin), host->mmc); + del_timer_sync(&host->detect_timer); + gpio_free(pin); + } + + mmc_remove_host(host->mmc); + + clk_enable(host->mck); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIDIS); + mci_readl(host, SR); + clk_disable(host->mck); + + if (host->wp_pin >= 0) + gpio_free(host->wp_pin); + + free_irq(platform_get_irq(pdev, 0), host->mmc); + iounmap(host->regs); + + clk_put(host->mck); + + mmc_free_host(host->mmc); + } + return 0; +} + +static struct platform_driver atmci_driver = { + .remove = __exit_p(atmci_remove), + .driver = { + .name = "atmel_mci", + }, +}; + +static int __init atmci_init(void) +{ + return platform_driver_probe(&atmci_driver, atmci_probe); +} + +static void __exit atmci_exit(void) +{ + platform_driver_unregister(&atmci_driver); +} + +module_init(atmci_init); +module_exit(atmci_exit); + +MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); +MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index cc5f7bc546af..3f15eb204895 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -21,7 +21,7 @@ * published by the Free Software Foundation. */ -/* Why is a timer used to detect insert events? +/* Why don't we use the SD controllers' carddetect feature? * * From the AU1100 MMC application guide: * If the Au1100-based design is intended to support both MultiMediaCards @@ -30,8 +30,6 @@ * In doing so, a MMC card never enters SPI-mode communications, * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective * (the low to high transition will not occur). - * - * So we use the timer to check the status manually. */ #include <linux/module.h> @@ -41,51 +39,110 @@ #include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> - +#include <linux/leds.h> #include <linux/mmc/host.h> + #include <asm/io.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h> -#include <au1xxx.h> -#include "au1xmmc.h" - #define DRIVER_NAME "au1xxx-mmc" /* Set this to enable special debugging macros */ +/* #define DEBUG */ #ifdef DEBUG -#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args) +#define DBG(fmt, idx, args...) \ + printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args) #else -#define DBG(fmt, idx, args...) +#define DBG(fmt, idx, args...) do {} while (0) #endif -const struct { +/* Hardware definitions */ +#define AU1XMMC_DESCRIPTOR_COUNT 1 +#define AU1XMMC_DESCRIPTOR_SIZE 2048 + +#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ + MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ + MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36) + +/* This gives us a hard value for the stop command that we can write directly + * to the command register. + */ +#define STOP_CMD \ + (SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO) + +/* This is the set of interrupts that we configure by default. */ +#define AU1XMMC_INTERRUPTS \ + (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT | \ + SD_CONFIG_CR | SD_CONFIG_I) + +/* The poll event (looking for insert/remove events runs twice a second. */ +#define AU1XMMC_DETECT_TIMEOUT (HZ/2) + +struct au1xmmc_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + + u32 flags; u32 iobase; - u32 tx_devid, rx_devid; - u16 bcsrpwr; - u16 bcsrstatus; - u16 wpstatus; -} au1xmmc_card_table[] = { - { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0, - BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP }, -#ifndef CONFIG_MIPS_DB1200 - { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1, - BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP } -#endif -}; + u32 clock; + u32 bus_width; + u32 power_mode; -#define AU1XMMC_CONTROLLER_COUNT (ARRAY_SIZE(au1xmmc_card_table)) + int status; -/* This array stores pointers for the hosts (used by the IRQ handler) */ -struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT]; -static int dma = 1; + struct { + int len; + int dir; + } dma; -#ifdef MODULE -module_param(dma, bool, 0); -MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)"); -#endif + struct { + int index; + int offset; + int len; + } pio; + + u32 tx_chan; + u32 rx_chan; + + int irq; + + struct tasklet_struct finish_task; + struct tasklet_struct data_task; + struct au1xmmc_platform_data *platdata; + struct platform_device *pdev; + struct resource *ioarea; +}; + +/* Status flags used by the host structure */ +#define HOST_F_XMIT 0x0001 +#define HOST_F_RECV 0x0002 +#define HOST_F_DMA 0x0010 +#define HOST_F_ACTIVE 0x0100 +#define HOST_F_STOP 0x1000 + +#define HOST_S_IDLE 0x0001 +#define HOST_S_CMD 0x0002 +#define HOST_S_DATA 0x0003 +#define HOST_S_STOP 0x0004 + +/* Easy access macros */ +#define HOST_STATUS(h) ((h)->iobase + SD_STATUS) +#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG) +#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE) +#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT) +#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT) +#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG) +#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE) +#define HOST_CMD(h) ((h)->iobase + SD_CMD) +#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2) +#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT) +#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG) + +#define DMA_CHANNEL(h) \ + (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask) { @@ -119,14 +176,13 @@ static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask) static inline void SEND_STOP(struct au1xmmc_host *host) { - - /* We know the value of CONFIG2, so avoid a read we don't need */ - u32 mask = SD_CONFIG2_EN; + u32 config2; WARN_ON(host->status != HOST_S_DATA); host->status = HOST_S_STOP; - au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host)); + config2 = au_readl(HOST_CONFIG2(host)); + au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host)); au_sync(); /* Send the stop commmand */ @@ -135,35 +191,36 @@ static inline void SEND_STOP(struct au1xmmc_host *host) static void au1xmmc_set_power(struct au1xmmc_host *host, int state) { - - u32 val = au1xmmc_card_table[host->id].bcsrpwr; - - bcsr->board &= ~val; - if (state) bcsr->board |= val; - - au_sync_delay(1); + if (host->platdata && host->platdata->set_power) + host->platdata->set_power(host->mmc, state); } -static inline int au1xmmc_card_inserted(struct au1xmmc_host *host) +static int au1xmmc_card_inserted(struct mmc_host *mmc) { - return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus) - ? 1 : 0; + struct au1xmmc_host *host = mmc_priv(mmc); + + if (host->platdata && host->platdata->card_inserted) + return !!host->platdata->card_inserted(host->mmc); + + return -ENOSYS; } static int au1xmmc_card_readonly(struct mmc_host *mmc) { struct au1xmmc_host *host = mmc_priv(mmc); - return (bcsr->status & au1xmmc_card_table[host->id].wpstatus) - ? 1 : 0; + + if (host->platdata && host->platdata->card_readonly) + return !!host->platdata->card_readonly(mmc); + + return -ENOSYS; } static void au1xmmc_finish_request(struct au1xmmc_host *host) { - struct mmc_request *mrq = host->mrq; host->mrq = NULL; - host->flags &= HOST_F_ACTIVE; + host->flags &= HOST_F_ACTIVE | HOST_F_DMA; host->dma.len = 0; host->dma.dir = 0; @@ -174,8 +231,6 @@ static void au1xmmc_finish_request(struct au1xmmc_host *host) host->status = HOST_S_IDLE; - bcsr->disk_leds |= (1 << 8); - mmc_request_done(host->mmc, mrq); } @@ -235,18 +290,14 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, au_sync(); /* Wait for the command to go on the line */ - - while(1) { - if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO)) - break; - } + while (au_readl(HOST_CMD(host)) & SD_CMD_GO) + /* nop */; /* Wait for the command to come back */ - if (wait) { u32 status = au_readl(HOST_STATUS(host)); - while(!(status & SD_STATUS_CR)) + while (!(status & SD_STATUS_CR)) status = au_readl(HOST_STATUS(host)); /* Clear the CR status */ @@ -260,12 +311,11 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) { - struct mmc_request *mrq = host->mrq; struct mmc_data *data; u32 crc; - WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP); + WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP)); if (host->mrq == NULL) return; @@ -276,15 +326,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) status = au_readl(HOST_STATUS(host)); /* The transaction is really over when the SD_STATUS_DB bit is clear */ - - while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB)) + while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB)) status = au_readl(HOST_STATUS(host)); data->error = 0; dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir); /* Process any errors */ - crc = (status & (SD_STATUS_WC | SD_STATUS_RC)); if (host->flags & HOST_F_XMIT) crc |= ((status & 0x07) == 0x02) ? 0 : 1; @@ -299,16 +347,16 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) if (!data->error) { if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ u32 chan = DMA_CHANNEL(host); - chan_tab_t *c = *((chan_tab_t **) chan); + chan_tab_t *c = *((chan_tab_t **)chan); au1x_dma_chan_t *cp = c->chan_ptr; data->bytes_xfered = cp->ddma_bytecnt; - } - else +#endif + } else data->bytes_xfered = - (data->blocks * data->blksz) - - host->pio.len; + (data->blocks * data->blksz) - host->pio.len; } au1xmmc_finish_request(host); @@ -316,7 +364,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) static void au1xmmc_tasklet_data(unsigned long param) { - struct au1xmmc_host *host = (struct au1xmmc_host *) param; + struct au1xmmc_host *host = (struct au1xmmc_host *)param; u32 status = au_readl(HOST_STATUS(host)); au1xmmc_data_complete(host, status); @@ -326,11 +374,10 @@ static void au1xmmc_tasklet_data(unsigned long param) static void au1xmmc_send_pio(struct au1xmmc_host *host) { - - struct mmc_data *data = 0; - int sg_len, max, count = 0; - unsigned char *sg_ptr; - u32 status = 0; + struct mmc_data *data; + int sg_len, max, count; + unsigned char *sg_ptr, val; + u32 status; struct scatterlist *sg; data = host->mrq->data; @@ -345,14 +392,12 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) /* This is the space left inside the buffer */ sg_len = data->sg[host->pio.index].length - host->pio.offset; - /* Check to if we need less then the size of the sg_buffer */ - + /* Check if we need less than the size of the sg_buffer */ max = (sg_len > host->pio.len) ? host->pio.len : sg_len; - if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER; - - for(count = 0; count < max; count++ ) { - unsigned char val; + if (max > AU1XMMC_MAX_TRANSFER) + max = AU1XMMC_MAX_TRANSFER; + for (count = 0; count < max; count++) { status = au_readl(HOST_STATUS(host)); if (!(status & SD_STATUS_TH)) @@ -360,7 +405,7 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) val = *sg_ptr++; - au_writel((unsigned long) val, HOST_TXPORT(host)); + au_writel((unsigned long)val, HOST_TXPORT(host)); au_sync(); } @@ -384,11 +429,10 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) static void au1xmmc_receive_pio(struct au1xmmc_host *host) { - - struct mmc_data *data = 0; - int sg_len = 0, max = 0, count = 0; - unsigned char *sg_ptr = 0; - u32 status = 0; + struct mmc_data *data; + int max, count, sg_len = 0; + unsigned char *sg_ptr = NULL; + u32 status, val; struct scatterlist *sg; data = host->mrq->data; @@ -405,33 +449,33 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) /* This is the space left inside the buffer */ sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset; - /* Check to if we need less then the size of the sg_buffer */ - if (sg_len < max) max = sg_len; + /* Check if we need less than the size of the sg_buffer */ + if (sg_len < max) + max = sg_len; } if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER; - for(count = 0; count < max; count++ ) { - u32 val; + for (count = 0; count < max; count++) { status = au_readl(HOST_STATUS(host)); if (!(status & SD_STATUS_NE)) break; if (status & SD_STATUS_RC) { - DBG("RX CRC Error [%d + %d].\n", host->id, + DBG("RX CRC Error [%d + %d].\n", host->pdev->id, host->pio.len, count); break; } if (status & SD_STATUS_RO) { - DBG("RX Overrun [%d + %d]\n", host->id, + DBG("RX Overrun [%d + %d]\n", host->pdev->id, host->pio.len, count); break; } else if (status & SD_STATUS_RU) { - DBG("RX Underrun [%d + %d]\n", host->id, + DBG("RX Underrun [%d + %d]\n", host->pdev->id, host->pio.len, count); break; } @@ -439,7 +483,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) val = au_readl(HOST_RXPORT(host)); if (sg_ptr) - *sg_ptr++ = (unsigned char) (val & 0xFF); + *sg_ptr++ = (unsigned char)(val & 0xFF); } host->pio.len -= count; @@ -451,7 +495,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) } if (host->pio.len == 0) { - //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); + /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */ IRQ_OFF(host, SD_CONFIG_NE); if (host->flags & HOST_F_STOP) @@ -461,17 +505,15 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) } } -/* static void au1xmmc_cmd_complete - This is called when a command has been completed - grab the response - and check for errors. Then start the data transfer if it is indicated. -*/ - +/* This is called when a command has been completed - grab the response + * and check for errors. Then start the data transfer if it is indicated. + */ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) { - struct mmc_request *mrq = host->mrq; struct mmc_command *cmd; - int trans; + u32 r[4]; + int i, trans; if (!host->mrq) return; @@ -481,9 +523,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) { - u32 r[4]; - int i; - r[0] = au_readl(host->iobase + SD_RESP3); r[1] = au_readl(host->iobase + SD_RESP2); r[2] = au_readl(host->iobase + SD_RESP1); @@ -491,10 +530,9 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) /* The CRC is omitted from the response, so really * we only got 120 bytes, but the engine expects - * 128 bits, so we have to shift things up + * 128 bits, so we have to shift things up. */ - - for(i = 0; i < 4; i++) { + for (i = 0; i < 4; i++) { cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8; if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24; @@ -505,22 +543,20 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) * our response omits the CRC, our data ends up * being shifted 8 bits to the right. In this case, * that means that the OSR data starts at bit 31, - * so we can just read RESP0 and return that + * so we can just read RESP0 and return that. */ cmd->resp[0] = au_readl(host->iobase + SD_RESP0); } } /* Figure out errors */ - if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC)) cmd->error = -EILSEQ; trans = host->flags & (HOST_F_XMIT | HOST_F_RECV); if (!trans || cmd->error) { - - IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF); + IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); tasklet_schedule(&host->finish_task); return; } @@ -528,6 +564,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) host->status = HOST_S_DATA; if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ u32 channel = DMA_CHANNEL(host); /* Start the DMA as soon as the buffer gets something in it */ @@ -540,23 +577,21 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) } au1xxx_dbdma_start(channel); +#endif } } static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) { - unsigned int pbus = get_au1x00_speed(); unsigned int divisor; u32 config; /* From databook: - divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1 - */ - + * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1 + */ pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2); pbus /= 2; - divisor = ((pbus / rate) / 2) - 1; config = au_readl(HOST_CONFIG(host)); @@ -568,15 +603,11 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) au_sync(); } -static int -au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) +static int au1xmmc_prepare_data(struct au1xmmc_host *host, + struct mmc_data *data) { - int datalen = data->blocks * data->blksz; - if (dma != 0) - host->flags |= HOST_F_DMA; - if (data->flags & MMC_DATA_READ) host->flags |= HOST_F_RECV; else @@ -596,12 +627,13 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) au_writel(data->blksz - 1, HOST_BLKSIZE(host)); if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ int i; u32 channel = DMA_CHANNEL(host); au1xxx_dbdma_stop(channel); - for(i = 0; i < host->dma.len; i++) { + for (i = 0; i < host->dma.len; i++) { u32 ret = 0, flags = DDMA_FLAGS_NOIE; struct scatterlist *sg = &data->sg[i]; int sg_len = sg->length; @@ -611,23 +643,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) if (i == host->dma.len - 1) flags = DDMA_FLAGS_IE; - if (host->flags & HOST_F_XMIT){ - ret = au1xxx_dbdma_put_source_flags(channel, - (void *) sg_virt(sg), len, flags); - } - else { - ret = au1xxx_dbdma_put_dest_flags(channel, - (void *) sg_virt(sg), - len, flags); + if (host->flags & HOST_F_XMIT) { + ret = au1xxx_dbdma_put_source_flags(channel, + (void *)sg_virt(sg), len, flags); + } else { + ret = au1xxx_dbdma_put_dest_flags(channel, + (void *)sg_virt(sg), len, flags); } - if (!ret) + if (!ret) goto dataerr; datalen -= len; } - } - else { +#endif + } else { host->pio.index = 0; host->pio.offset = 0; host->pio.len = datalen; @@ -636,25 +666,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) IRQ_ON(host, SD_CONFIG_TH); else IRQ_ON(host, SD_CONFIG_NE); - //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF); + /* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */ } return 0; - dataerr: - dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir); +dataerr: + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + host->dma.dir); return -ETIMEDOUT; } -/* static void au1xmmc_request - This actually starts a command or data transaction -*/ - +/* This actually starts a command or data transaction */ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) { - struct au1xmmc_host *host = mmc_priv(mmc); - unsigned int flags = 0; int ret = 0; WARN_ON(irqs_disabled()); @@ -663,11 +689,15 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) host->mrq = mrq; host->status = HOST_S_CMD; - bcsr->disk_leds &= ~(1 << 8); + /* fail request immediately if no card is present */ + if (0 == au1xmmc_card_inserted(mmc)) { + mrq->cmd->error = -ENOMEDIUM; + au1xmmc_finish_request(host); + return; + } if (mrq->data) { FLUSH_FIFO(host); - flags = mrq->data->flags; ret = au1xmmc_prepare_data(host, mrq->data); } @@ -682,7 +712,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) static void au1xmmc_reset_controller(struct au1xmmc_host *host) { - /* Apply the clock */ au_writel(SD_ENABLE_CE, HOST_ENABLE(host)); au_sync_delay(1); @@ -712,9 +741,10 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host) } -static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) +static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct au1xmmc_host *host = mmc_priv(mmc); + u32 config2; if (ios->power_mode == MMC_POWER_OFF) au1xmmc_set_power(host, 0); @@ -726,21 +756,18 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) au1xmmc_set_clock(host, ios->clock); host->clock = ios->clock; } -} - -static void au1xmmc_dma_callback(int irq, void *dev_id) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id; - - /* Avoid spurious interrupts */ - if (!host->mrq) - return; - - if (host->flags & HOST_F_STOP) - SEND_STOP(host); - - tasklet_schedule(&host->data_task); + config2 = au_readl(HOST_CONFIG2(host)); + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + config2 |= SD_CONFIG2_WB; + break; + case MMC_BUS_WIDTH_1: + config2 &= ~SD_CONFIG2_WB; + break; + } + au_writel(config2, HOST_CONFIG2(host)); + au_sync(); } #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT) @@ -749,245 +776,354 @@ static void au1xmmc_dma_callback(int irq, void *dev_id) static irqreturn_t au1xmmc_irq(int irq, void *dev_id) { - + struct au1xmmc_host *host = dev_id; u32 status; - int i, ret = 0; - - disable_irq(AU1100_SD_IRQ); - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct au1xmmc_host * host = au1xmmc_hosts[i]; - u32 handled = 1; + status = au_readl(HOST_STATUS(host)); - status = au_readl(HOST_STATUS(host)); + if (!(status & SD_STATUS_I)) + return IRQ_NONE; /* not ours */ - if (host->mrq && (status & STATUS_TIMEOUT)) { - if (status & SD_STATUS_RAT) - host->mrq->cmd->error = -ETIMEDOUT; + if (status & SD_STATUS_SI) /* SDIO */ + mmc_signal_sdio_irq(host->mmc); - else if (status & SD_STATUS_DT) - host->mrq->data->error = -ETIMEDOUT; + if (host->mrq && (status & STATUS_TIMEOUT)) { + if (status & SD_STATUS_RAT) + host->mrq->cmd->error = -ETIMEDOUT; + else if (status & SD_STATUS_DT) + host->mrq->data->error = -ETIMEDOUT; - /* In PIO mode, interrupts might still be enabled */ - IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH); + /* In PIO mode, interrupts might still be enabled */ + IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH); - //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF); - tasklet_schedule(&host->finish_task); - } + /* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */ + tasklet_schedule(&host->finish_task); + } #if 0 - else if (status & SD_STATUS_DD) { - - /* Sometimes we get a DD before a NE in PIO mode */ - - if (!(host->flags & HOST_F_DMA) && - (status & SD_STATUS_NE)) - au1xmmc_receive_pio(host); - else { - au1xmmc_data_complete(host, status); - //tasklet_schedule(&host->data_task); - } + else if (status & SD_STATUS_DD) { + /* Sometimes we get a DD before a NE in PIO mode */ + if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE)) + au1xmmc_receive_pio(host); + else { + au1xmmc_data_complete(host, status); + /* tasklet_schedule(&host->data_task); */ } + } #endif - else if (status & (SD_STATUS_CR)) { - if (host->status == HOST_S_CMD) - au1xmmc_cmd_complete(host,status); - } - else if (!(host->flags & HOST_F_DMA)) { - if ((host->flags & HOST_F_XMIT) && - (status & STATUS_DATA_OUT)) - au1xmmc_send_pio(host); - else if ((host->flags & HOST_F_RECV) && - (status & STATUS_DATA_IN)) - au1xmmc_receive_pio(host); - } - else if (status & 0x203FBC70) { - DBG("Unhandled status %8.8x\n", host->id, status); - handled = 0; - } - - au_writel(status, HOST_STATUS(host)); - au_sync(); - - ret |= handled; + else if (status & SD_STATUS_CR) { + if (host->status == HOST_S_CMD) + au1xmmc_cmd_complete(host, status); + + } else if (!(host->flags & HOST_F_DMA)) { + if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT)) + au1xmmc_send_pio(host); + else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN)) + au1xmmc_receive_pio(host); + + } else if (status & 0x203F3C70) { + DBG("Unhandled status %8.8x\n", host->pdev->id, + status); } - enable_irq(AU1100_SD_IRQ); - return ret; + au_writel(status, HOST_STATUS(host)); + au_sync(); + + return IRQ_HANDLED; } -static void au1xmmc_poll_event(unsigned long arg) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *) arg; +#ifdef CONFIG_SOC_AU1200 +/* 8bit memory DMA device */ +static dbdev_tab_t au1xmmc_mem_dbdev = { + .dev_id = DSCR_CMD0_ALWAYS, + .dev_flags = DEV_FLAGS_ANYUSE, + .dev_tsize = 0, + .dev_devwidth = 8, + .dev_physaddr = 0x00000000, + .dev_intlevel = 0, + .dev_intpolarity = 0, +}; +static int memid; - int card = au1xmmc_card_inserted(host); - int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0; +static void au1xmmc_dbdma_callback(int irq, void *dev_id) +{ + struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id; - if (card != controller) { - host->flags &= ~HOST_F_ACTIVE; - if (card) host->flags |= HOST_F_ACTIVE; - mmc_detect_change(host->mmc, 0); - } + /* Avoid spurious interrupts */ + if (!host->mrq) + return; - if (host->mrq != NULL) { - u32 status = au_readl(HOST_STATUS(host)); - DBG("PENDING - %8.8x\n", host->id, status); - } + if (host->flags & HOST_F_STOP) + SEND_STOP(host); - mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT); + tasklet_schedule(&host->data_task); } -static dbdev_tab_t au1xmmc_mem_dbdev = -{ - DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0 -}; - -static void au1xmmc_init_dma(struct au1xmmc_host *host) +static int au1xmmc_dbdma_init(struct au1xmmc_host *host) { + struct resource *res; + int txid, rxid; + + res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0); + if (!res) + return -ENODEV; + txid = res->start; + + res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1); + if (!res) + return -ENODEV; + rxid = res->start; + + if (!memid) + return -ENODEV; + + host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid, + au1xmmc_dbdma_callback, (void *)host); + if (!host->tx_chan) { + dev_err(&host->pdev->dev, "cannot allocate TX DMA\n"); + return -ENODEV; + } - u32 rxchan, txchan; - - int txid = au1xmmc_card_table[host->id].tx_devid; - int rxid = au1xmmc_card_table[host->id].rx_devid; + host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid, + au1xmmc_dbdma_callback, (void *)host); + if (!host->rx_chan) { + dev_err(&host->pdev->dev, "cannot allocate RX DMA\n"); + au1xxx_dbdma_chan_free(host->tx_chan); + return -ENODEV; + } - /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride - of 8 bits. And since devices are shared, we need to create - our own to avoid freaking out other devices - */ + au1xxx_dbdma_set_devwidth(host->tx_chan, 8); + au1xxx_dbdma_set_devwidth(host->rx_chan, 8); - int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); + au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT); + au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT); - txchan = au1xxx_dbdma_chan_alloc(memid, txid, - au1xmmc_dma_callback, (void *) host); + /* DBDMA is good to go */ + host->flags |= HOST_F_DMA; - rxchan = au1xxx_dbdma_chan_alloc(rxid, memid, - au1xmmc_dma_callback, (void *) host); + return 0; +} - au1xxx_dbdma_set_devwidth(txchan, 8); - au1xxx_dbdma_set_devwidth(rxchan, 8); +static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host) +{ + if (host->flags & HOST_F_DMA) { + host->flags &= ~HOST_F_DMA; + au1xxx_dbdma_chan_free(host->tx_chan); + au1xxx_dbdma_chan_free(host->rx_chan); + } +} +#endif - au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT); - au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT); +static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en) +{ + struct au1xmmc_host *host = mmc_priv(mmc); - host->tx_chan = txchan; - host->rx_chan = rxchan; + if (en) + IRQ_ON(host, SD_CONFIG_SI); + else + IRQ_OFF(host, SD_CONFIG_SI); } static const struct mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, .get_ro = au1xmmc_card_readonly, + .get_cd = au1xmmc_card_inserted, + .enable_sdio_irq = au1xmmc_enable_sdio_irq, }; static int __devinit au1xmmc_probe(struct platform_device *pdev) { + struct mmc_host *mmc; + struct au1xmmc_host *host; + struct resource *r; + int ret; + + mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "no memory for mmc_host\n"); + ret = -ENOMEM; + goto out0; + } - int i, ret = 0; - - /* THe interrupt is shared among all controllers */ - ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0); + host = mmc_priv(mmc); + host->mmc = mmc; + host->platdata = pdev->dev.platform_data; + host->pdev = pdev; - if (ret) { - printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n", - AU1100_SD_IRQ, ret); - return -ENXIO; + ret = -ENODEV; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no mmio defined\n"); + goto out1; } - disable_irq(AU1100_SD_IRQ); + host->ioarea = request_mem_region(r->start, r->end - r->start + 1, + pdev->name); + if (!host->ioarea) { + dev_err(&pdev->dev, "mmio already in use\n"); + goto out1; + } - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); - struct au1xmmc_host *host = 0; + host->iobase = (unsigned long)ioremap(r->start, 0x3c); + if (!host->iobase) { + dev_err(&pdev->dev, "cannot remap mmio\n"); + goto out2; + } - if (!mmc) { - printk(DRIVER_NAME "ERROR: no mem for host %d\n", i); - au1xmmc_hosts[i] = 0; - continue; - } + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&pdev->dev, "no IRQ defined\n"); + goto out3; + } - mmc->ops = &au1xmmc_ops; + host->irq = r->start; + /* IRQ is shared among both SD controllers */ + ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, + DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } - mmc->f_min = 450000; - mmc->f_max = 24000000; + mmc->ops = &au1xmmc_ops; - mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; - mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT; + mmc->f_min = 450000; + mmc->f_max = 24000000; - mmc->max_blk_size = 2048; - mmc->max_blk_count = 512; + mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; + mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT; - mmc->ocr_avail = AU1XMMC_OCR; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 512; - host = mmc_priv(mmc); - host->mmc = mmc; + mmc->ocr_avail = AU1XMMC_OCR; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - host->id = i; - host->iobase = au1xmmc_card_table[host->id].iobase; - host->clock = 0; - host->power_mode = MMC_POWER_OFF; + host->status = HOST_S_IDLE; - host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0; - host->status = HOST_S_IDLE; + /* board-specific carddetect setup, if any */ + if (host->platdata && host->platdata->cd_setup) { + ret = host->platdata->cd_setup(mmc, 1); + if (ret) { + dev_warn(&pdev->dev, "board CD setup failed\n"); + mmc->caps |= MMC_CAP_NEEDS_POLL; + } + } else + mmc->caps |= MMC_CAP_NEEDS_POLL; - init_timer(&host->timer); + tasklet_init(&host->data_task, au1xmmc_tasklet_data, + (unsigned long)host); - host->timer.function = au1xmmc_poll_event; - host->timer.data = (unsigned long) host; - host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT; + tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, + (unsigned long)host); - tasklet_init(&host->data_task, au1xmmc_tasklet_data, - (unsigned long) host); +#ifdef CONFIG_SOC_AU1200 + ret = au1xmmc_dbdma_init(host); + if (ret) + printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n"); +#endif - tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, - (unsigned long) host); +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) { + struct led_classdev *led = host->platdata->led; + led->name = mmc_hostname(mmc); + led->brightness = LED_OFF; + led->default_trigger = mmc_hostname(mmc); + ret = led_classdev_register(mmc_dev(mmc), led); + if (ret) + goto out5; + } +#endif - spin_lock_init(&host->lock); + au1xmmc_reset_controller(host); - if (dma != 0) - au1xmmc_init_dma(host); + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "cannot add mmc host\n"); + goto out6; + } - au1xmmc_reset_controller(host); + platform_set_drvdata(pdev, mmc); - mmc_add_host(mmc); - au1xmmc_hosts[i] = host; + printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X" + " (mode=%s)\n", pdev->id, host->iobase, + host->flags & HOST_F_DMA ? "dma" : "pio"); - add_timer(&host->timer); + return 0; /* all ok */ - printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n", - host->id, host->iobase, dma ? "dma" : "pio"); - } +out6: +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) + led_classdev_unregister(host->platdata->led); +out5: +#endif + au_writel(0, HOST_ENABLE(host)); + au_writel(0, HOST_CONFIG(host)); + au_writel(0, HOST_CONFIG2(host)); + au_sync(); - enable_irq(AU1100_SD_IRQ); +#ifdef CONFIG_SOC_AU1200 + au1xmmc_dbdma_shutdown(host); +#endif - return 0; + tasklet_kill(&host->data_task); + tasklet_kill(&host->finish_task); + + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) + host->platdata->cd_setup(mmc, 0); + + free_irq(host->irq, host); +out3: + iounmap((void *)host->iobase); +out2: + release_resource(host->ioarea); + kfree(host->ioarea); +out1: + mmc_free_host(mmc); +out0: + return ret; } static int __devexit au1xmmc_remove(struct platform_device *pdev) { + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct au1xmmc_host *host; + + if (mmc) { + host = mmc_priv(mmc); - int i; + mmc_remove_host(mmc); - disable_irq(AU1100_SD_IRQ); +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) + led_classdev_unregister(host->platdata->led); +#endif - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct au1xmmc_host *host = au1xmmc_hosts[i]; - if (!host) continue; + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) + host->platdata->cd_setup(mmc, 0); + + au_writel(0, HOST_ENABLE(host)); + au_writel(0, HOST_CONFIG(host)); + au_writel(0, HOST_CONFIG2(host)); + au_sync(); tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); - del_timer_sync(&host->timer); +#ifdef CONFIG_SOC_AU1200 + au1xmmc_dbdma_shutdown(host); +#endif au1xmmc_set_power(host, 0); - mmc_remove_host(host->mmc); - - au1xxx_dbdma_chan_free(host->tx_chan); - au1xxx_dbdma_chan_free(host->rx_chan); + free_irq(host->irq, host); + iounmap((void *)host->iobase); + release_resource(host->ioarea); + kfree(host->ioarea); - au_writel(0x0, HOST_ENABLE(host)); - au_sync(); + mmc_free_host(mmc); } - - free_irq(AU1100_SD_IRQ, 0); return 0; } @@ -1004,21 +1140,31 @@ static struct platform_driver au1xmmc_driver = { static int __init au1xmmc_init(void) { +#ifdef CONFIG_SOC_AU1200 + /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride + * of 8 bits. And since devices are shared, we need to create + * our own to avoid freaking out other devices. + */ + memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); + if (!memid) + printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n"); +#endif return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { +#ifdef CONFIG_SOC_AU1200 + if (memid) + au1xxx_ddma_del_device(memid); +#endif platform_driver_unregister(&au1xmmc_driver); } module_init(au1xmmc_init); module_exit(au1xmmc_exit); -#ifdef MODULE MODULE_AUTHOR("Advanced Micro Devices, Inc"); MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:au1xxx-mmc"); -#endif - diff --git a/drivers/mmc/host/au1xmmc.h b/drivers/mmc/host/au1xmmc.h deleted file mode 100644 index 341cbdf0baca..000000000000 --- a/drivers/mmc/host/au1xmmc.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef _AU1XMMC_H_ -#define _AU1XMMC_H_ - -/* Hardware definitions */ - -#define AU1XMMC_DESCRIPTOR_COUNT 1 -#define AU1XMMC_DESCRIPTOR_SIZE 2048 - -#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ - MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ - MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36) - -/* Easy access macros */ - -#define HOST_STATUS(h) ((h)->iobase + SD_STATUS) -#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG) -#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE) -#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT) -#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT) -#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG) -#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE) -#define HOST_CMD(h) ((h)->iobase + SD_CMD) -#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2) -#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT) -#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG) - -#define DMA_CHANNEL(h) \ - ( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) - -/* This gives us a hard value for the stop command that we can write directly - * to the command register - */ - -#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO) - -/* This is the set of interrupts that we configure by default */ - -#if 0 -#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \ - SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I) -#endif - -#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \ - SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I) -/* The poll event (looking for insert/remove events runs twice a second */ -#define AU1XMMC_DETECT_TIMEOUT (HZ/2) - -struct au1xmmc_host { - struct mmc_host *mmc; - struct mmc_request *mrq; - - u32 id; - - u32 flags; - u32 iobase; - u32 clock; - u32 bus_width; - u32 power_mode; - - int status; - - struct { - int len; - int dir; - } dma; - - struct { - int index; - int offset; - int len; - } pio; - - u32 tx_chan; - u32 rx_chan; - - struct timer_list timer; - struct tasklet_struct finish_task; - struct tasklet_struct data_task; - - spinlock_t lock; -}; - -/* Status flags used by the host structure */ - -#define HOST_F_XMIT 0x0001 -#define HOST_F_RECV 0x0002 -#define HOST_F_DMA 0x0010 -#define HOST_F_ACTIVE 0x0100 -#define HOST_F_STOP 0x1000 - -#define HOST_S_IDLE 0x0001 -#define HOST_S_CMD 0x0002 -#define HOST_S_DATA 0x0003 -#define HOST_S_STOP 0x0004 - -#endif diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index eed211b2ac70..5e880c0f1349 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -892,9 +892,12 @@ static int imxmci_get_ro(struct mmc_host *mmc) struct imxmci_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc_dev(mmc)); - /* Host doesn't support read only detection so assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 35508584ac2a..41cc63360e43 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1126,16 +1126,28 @@ static int mmc_spi_get_ro(struct mmc_host *mmc) struct mmc_spi_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc->parent); - /* board doesn't support read only detection; assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc->parent); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } +static int mmc_spi_get_cd(struct mmc_host *mmc) +{ + struct mmc_spi_host *host = mmc_priv(mmc); + + if (host->pdata && host->pdata->get_cd) + return !!host->pdata->get_cd(mmc->parent); + return -ENOSYS; +} static const struct mmc_host_ops mmc_spi_ops = { .request = mmc_spi_request, .set_ios = mmc_spi_set_ios, .get_ro = mmc_spi_get_ro, + .get_cd = mmc_spi_get_cd, }; @@ -1240,10 +1252,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc->ops = &mmc_spi_ops; mmc->max_blk_size = MMC_SPI_BLOCKSIZE; - /* As long as we keep track of the number of successfully - * transmitted blocks, we're good for multiwrite. - */ - mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_SPI; /* SPI doesn't need the lowspeed device identification thing for * MMC or SD cards, since it never comes up in open drain mode. @@ -1319,17 +1328,23 @@ static int mmc_spi_probe(struct spi_device *spi) goto fail_glue_init; } + /* pass platform capabilities, if any */ + if (host->pdata) + mmc->caps |= host->pdata->caps; + status = mmc_add_host(mmc); if (status != 0) goto fail_add_host; - dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n", + dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n", mmc->class_dev.bus_id, host->dma_dev ? "" : ", no DMA", (host->pdata && host->pdata->get_ro) ? "" : ", no WP", (host->pdata && host->pdata->setpower) - ? "" : ", no poweroff"); + ? "" : ", no poweroff", + (mmc->caps & MMC_CAP_NEEDS_POLL) + ? ", cd polling" : ""); return 0; fail_add_host: diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index da5fecad74d9..696cf3647ceb 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -535,7 +535,6 @@ static int mmci_probe(struct amba_device *dev, void *id) mmc->f_min = (host->mclk + 511) / 512; mmc->f_max = min(host->mclk, fmax); mmc->ocr_avail = plat->ocr_mask; - mmc->caps = MMC_CAP_MULTIWRITE; /* * We can do SGIO diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 549517c35675..dbc26eb6a89e 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) host->slots[id] = slot; - mmc->caps = MMC_CAP_MULTIWRITE; + mmc->caps = 0; if (host->pdata->conf.wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index d89475d36988..d39f59738866 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -374,9 +374,12 @@ static int pxamci_get_ro(struct mmc_host *mmc) struct pxamci_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc_dev(mmc)); - /* Host doesn't support read only detection so assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c new file mode 100644 index 000000000000..6a1e4994b724 --- /dev/null +++ b/drivers/mmc/host/s3cmci.c @@ -0,0 +1,1446 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/dma.h> + +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-gpio.h> + +#include <asm/plat-s3c24xx/mci.h> + +#include "s3cmci.h" + +#define DRIVER_NAME "s3c-mci" + +enum dbg_channels { + dbg_err = (1 << 0), + dbg_debug = (1 << 1), + dbg_info = (1 << 2), + dbg_irq = (1 << 3), + dbg_sg = (1 << 4), + dbg_dma = (1 << 5), + dbg_pio = (1 << 6), + dbg_fail = (1 << 7), + dbg_conf = (1 << 8), +}; + +static const int dbgmap_err = dbg_err | dbg_fail; +static const int dbgmap_info = dbg_info | dbg_conf; +static const int dbgmap_debug = dbg_debug; + +#define dbg(host, channels, args...) \ + do { \ + if (dbgmap_err & channels) \ + dev_err(&host->pdev->dev, args); \ + else if (dbgmap_info & channels) \ + dev_info(&host->pdev->dev, args); \ + else if (dbgmap_debug & channels) \ + dev_dbg(&host->pdev->dev, args); \ + } while (0) + +#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) + +static struct s3c2410_dma_client s3cmci_dma_client = { + .name = "s3c-mci", +}; + +static void finalize_request(struct s3cmci_host *host); +static void s3cmci_send_request(struct mmc_host *mmc); +static void s3cmci_reset(struct s3cmci_host *host); + +#ifdef CONFIG_MMC_DEBUG + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) +{ + u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; + u32 datcon, datcnt, datsta, fsta, imask; + + con = readl(host->base + S3C2410_SDICON); + pre = readl(host->base + S3C2410_SDIPRE); + cmdarg = readl(host->base + S3C2410_SDICMDARG); + cmdcon = readl(host->base + S3C2410_SDICMDCON); + cmdsta = readl(host->base + S3C2410_SDICMDSTAT); + r0 = readl(host->base + S3C2410_SDIRSP0); + r1 = readl(host->base + S3C2410_SDIRSP1); + r2 = readl(host->base + S3C2410_SDIRSP2); + r3 = readl(host->base + S3C2410_SDIRSP3); + timer = readl(host->base + S3C2410_SDITIMER); + bsize = readl(host->base + S3C2410_SDIBSIZE); + datcon = readl(host->base + S3C2410_SDIDCON); + datcnt = readl(host->base + S3C2410_SDIDCNT); + datsta = readl(host->base + S3C2410_SDIDSTA); + fsta = readl(host->base + S3C2410_SDIFSTA); + imask = readl(host->base + host->sdiimsk); + + dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", + prefix, con, pre, timer); + + dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", + prefix, cmdcon, cmdarg, cmdsta); + + dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" + " DSTA:[%08x] DCNT:[%08x]\n", + prefix, datcon, fsta, datsta, datcnt); + + dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" + " R2:[%08x] R3:[%08x]\n", + prefix, r0, r1, r2, r3); +} + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) +{ + snprintf(host->dbgmsg_cmd, 300, + "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", + host->ccnt, (stop ? " (STOP)" : ""), + cmd->opcode, cmd->arg, cmd->flags, cmd->retries); + + if (cmd->data) { + snprintf(host->dbgmsg_dat, 300, + "#%u bsize:%u blocks:%u bytes:%u", + host->dcnt, cmd->data->blksz, + cmd->data->blocks, + cmd->data->blocks * cmd->data->blksz); + } else { + host->dbgmsg_dat[0] = '\0'; + } +} + +static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, + int fail) +{ + unsigned int dbglvl = fail ? dbg_fail : dbg_debug; + + if (!cmd) + return; + + if (cmd->error == 0) { + dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", + host->dbgmsg_cmd, cmd->resp[0]); + } else { + dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", + cmd->error, host->dbgmsg_cmd, host->status); + } + + if (!cmd->data) + return; + + if (cmd->data->error == 0) { + dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); + } else { + dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", + cmd->data->error, host->dbgmsg_dat, + readl(host->base + S3C2410_SDIDCNT)); + } +} +#else +static void dbg_dumpcmd(struct s3cmci_host *host, + struct mmc_command *cmd, int fail) { } + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) { } + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } + +#endif /* CONFIG_MMC_DEBUG */ + +static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask |= imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask &= ~imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline void clear_imask(struct s3cmci_host *host) +{ + writel(0, host->base + host->sdiimsk); +} + +static inline int get_data_buffer(struct s3cmci_host *host, + u32 *words, u32 **pointer) +{ + struct scatterlist *sg; + + if (host->pio_active == XFER_NONE) + return -EINVAL; + + if ((!host->mrq) || (!host->mrq->data)) + return -EINVAL; + + if (host->pio_sgptr >= host->mrq->data->sg_len) { + dbg(host, dbg_debug, "no more buffers (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + return -EBUSY; + } + sg = &host->mrq->data->sg[host->pio_sgptr]; + + *words = sg->length >> 2; + *pointer = sg_virt(sg); + + host->pio_sgptr++; + + dbg(host, dbg_sg, "new buffer (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + + return 0; +} + +static inline u32 fifo_count(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return fifostat >> 2; +} + +static inline u32 fifo_free(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return (63 - fifostat) >> 2; +} + +static void do_pio_read(struct s3cmci_host *host) +{ + int res; + u32 fifo; + void __iomem *from_ptr; + + /* write real prescaler to host, it might be set slow to fix */ + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + from_ptr = host->base + host->sdidata; + + while ((fifo = fifo_count(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + dbg(host, dbg_pio, "pio_read(): " + "complete (no more data).\n"); + return; + } + + dbg(host, dbg_pio, + "pio_read(): new target: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + } + + dbg(host, dbg_pio, + "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", + fifo, host->pio_words, + readl(host->base + S3C2410_SDIDCNT)); + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + *(host->pio_ptr++) = readl(from_ptr); + } + + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_read(): complete (no more buffers).\n"); + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + return; + } + } + + enable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); +} + +static void do_pio_write(struct s3cmci_host *host) +{ + void __iomem *to_ptr; + int res; + u32 fifo; + + to_ptr = host->base + host->sdidata; + + while ((fifo = fifo_free(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_write(): complete (no more data).\n"); + host->pio_active = XFER_NONE; + + return; + } + + dbg(host, dbg_pio, + "pio_write(): new source: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + + } + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + writel(*(host->pio_ptr++), to_ptr); + } + + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); +} + +static void pio_tasklet(unsigned long data) +{ + struct s3cmci_host *host = (struct s3cmci_host *) data; + + + disable_irq(host->irq); + + if (host->pio_active == XFER_WRITE) + do_pio_write(host); + + if (host->pio_active == XFER_READ) + do_pio_read(host); + + if (host->complete_what == COMPLETION_FINALIZE) { + clear_imask(host); + if (host->pio_active != XFER_NONE) { + dbg(host, dbg_err, "unfinished %s " + "- pio_count:[%u] pio_words:[%u]\n", + (host->pio_active == XFER_READ) ? "read" : "write", + host->pio_count, host->pio_words); + + if (host->mrq->data) + host->mrq->data->error = -EINVAL; + } + + finalize_request(host); + } else + enable_irq(host->irq); +} + +/* + * ISR for SDI Interface IRQ + * Communication between driver and ISR works as follows: + * host->mrq points to current request + * host->complete_what Indicates when the request is considered done + * COMPLETION_CMDSENT when the command was sent + * COMPLETION_RSPFIN when a response was received + * COMPLETION_XFERFINISH when the data transfer is finished + * COMPLETION_XFERFINISH_RSPFIN both of the above. + * host->complete_request is the completion-object the driver waits for + * + * 1) Driver sets up host->mrq and host->complete_what + * 2) Driver prepares the transfer + * 3) Driver enables interrupts + * 4) Driver starts transfer + * 5) Driver waits for host->complete_rquest + * 6) ISR checks for request status (errors and success) + * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error + * 7) ISR completes host->complete_request + * 8) ISR disables interrupts + * 9) Driver wakes up and takes care of the request + * + * Note: "->error"-fields are expected to be set to 0 before the request + * was issued by mmc.c - therefore they are only set, when an error + * contition comes up + */ + +static irqreturn_t s3cmci_irq(int irq, void *dev_id) +{ + struct s3cmci_host *host = dev_id; + struct mmc_command *cmd; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; + u32 mci_cclear, mci_dclear; + unsigned long iflags; + + spin_lock_irqsave(&host->complete_lock, iflags); + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_imsk = readl(host->base + host->sdiimsk); + mci_cclear = 0; + mci_dclear = 0; + + if ((host->complete_what == COMPLETION_NONE) || + (host->complete_what == COMPLETION_FINALIZE)) { + host->status = "nothing to complete"; + clear_imask(host); + goto irq_out; + } + + if (!host->mrq) { + host->status = "no active mrq"; + clear_imask(host); + goto irq_out; + } + + cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; + + if (!cmd) { + host->status = "no active cmd"; + clear_imask(host); + goto irq_out; + } + + if (!host->dodma) { + if ((host->pio_active == XFER_WRITE) && + (mci_fsta & S3C2410_SDIFSTA_TFDET)) { + + disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + tasklet_schedule(&host->pio_tasklet); + host->status = "pio tx"; + } + + if ((host->pio_active == XFER_READ) && + (mci_fsta & S3C2410_SDIFSTA_RFDET)) { + + disable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | + S3C2410_SDIIMSK_RXFIFOLAST); + + tasklet_schedule(&host->pio_tasklet); + host->status = "pio rx"; + } + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n"); + cmd->error = -ETIMEDOUT; + host->status = "error: command timeout"; + goto fail_transfer; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { + if (host->complete_what == COMPLETION_CMDSENT) { + host->status = "ok: command sent"; + goto close_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { + if (cmd->flags & MMC_RSP_CRC) { + if (host->mrq->cmd->flags & MMC_RSP_136) { + dbg(host, dbg_irq, + "fixup: ignore CRC fail with long rsp\n"); + } else { + /* note, we used to fail the transfer + * here, but it seems that this is just + * the hardware getting it wrong. + * + * cmd->error = -EILSEQ; + * host->status = "error: bad command crc"; + * goto fail_transfer; + */ + } + } + + mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; + } + + if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { + if (host->complete_what == COMPLETION_RSPFIN) { + host->status = "ok: command response received"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_XFERFINISH; + + mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; + } + + /* errors handled after this point are only relevant + when a data transfer is in progress */ + + if (!cmd->data) + goto clear_status_bits; + + /* Check for FIFO failure */ + if (host->is2440) { + if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); + host->mrq->data->error = -EILSEQ; + host->status = "error: 2440 fifo failure"; + goto fail_transfer; + } + } else { + if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); + cmd->data->error = -EILSEQ; + host->status = "error: fifo failure"; + goto fail_transfer; + } + } + + if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + dbg(host, dbg_err, "bad data crc (outgoing)\n"); + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (outgoing)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + dbg(host, dbg_err, "bad data crc (incoming)\n"); + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (incoming)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + dbg(host, dbg_err, "data timeout\n"); + cmd->data->error = -ETIMEDOUT; + host->status = "error: data timeout"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { + if (host->complete_what == COMPLETION_XFERFINISH) { + host->status = "ok: data transfer completed"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_RSPFIN; + + mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; + } + +clear_status_bits: + writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); + writel(mci_dclear, host->base + S3C2410_SDIDSTA); + + goto irq_out; + +fail_transfer: + host->pio_active = XFER_NONE; + +close_transfer: + host->complete_what = COMPLETION_FINALIZE; + + clear_imask(host); + tasklet_schedule(&host->pio_tasklet); + + goto irq_out; + +irq_out: + dbg(host, dbg_irq, + "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", + mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); + + spin_unlock_irqrestore(&host->complete_lock, iflags); + return IRQ_HANDLED; + +} + +/* + * ISR for the CardDetect Pin +*/ + +static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) +{ + struct s3cmci_host *host = (struct s3cmci_host *)dev_id; + + dbg(host, dbg_irq, "card detect\n"); + + mmc_detect_change(host->mmc, msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, + int size, enum s3c2410_dma_buffresult result) +{ + struct s3cmci_host *host = buf_id; + unsigned long iflags; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + + BUG_ON(!host->mrq); + BUG_ON(!host->mrq->data); + BUG_ON(!host->dmatogo); + + spin_lock_irqsave(&host->complete_lock, iflags); + + if (result != S3C2410_RES_OK) { + dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " + "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", + mci_csta, mci_dsta, mci_fsta, + mci_dcnt, result, host->dmatogo); + + goto fail_request; + } + + host->dmatogo--; + if (host->dmatogo) { + dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " + "DCNT:[%08x] toGo:%u\n", + size, mci_dsta, mci_dcnt, host->dmatogo); + + goto out; + } + + dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", + size, mci_dsta, mci_dcnt); + + host->complete_what = COMPLETION_FINALIZE; + +out: + tasklet_schedule(&host->pio_tasklet); + spin_unlock_irqrestore(&host->complete_lock, iflags); + return; + +fail_request: + host->mrq->data->error = -EINVAL; + host->complete_what = COMPLETION_FINALIZE; + writel(0, host->base + host->sdiimsk); + goto out; + +} + +static void finalize_request(struct s3cmci_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + int debug_as_failure = 0; + + if (host->complete_what != COMPLETION_FINALIZE) + return; + + if (!mrq) + return; + + if (cmd->data && (cmd->error == 0) && + (cmd->data->error == 0)) { + if (host->dodma && (!host->dma_complete)) { + dbg(host, dbg_dma, "DMA Missing!\n"); + return; + } + } + + /* Read response from controller. */ + cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); + cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); + cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); + cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); + + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + if (cmd->error) + debug_as_failure = 1; + + if (cmd->data && cmd->data->error) + debug_as_failure = 1; + + dbg_dumpcmd(host, cmd, debug_as_failure); + + /* Cleanup controller */ + writel(0, host->base + S3C2410_SDICMDARG); + writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); + writel(0, host->base + S3C2410_SDICMDCON); + writel(0, host->base + host->sdiimsk); + + if (cmd->data && cmd->error) + cmd->data->error = cmd->error; + + if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { + host->cmd_is_stop = 1; + s3cmci_send_request(host->mmc); + return; + } + + /* If we have no data transfer we are finished here */ + if (!mrq->data) + goto request_done; + + /* Calulate the amout of bytes transfer if there was no error */ + if (mrq->data->error == 0) { + mrq->data->bytes_xfered = + (mrq->data->blocks * mrq->data->blksz); + } else { + mrq->data->bytes_xfered = 0; + } + + /* If we had an error while transfering data we flush the + * DMA channel and the fifo to clear out any garbage. */ + if (mrq->data->error != 0) { + if (host->dodma) + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + if (host->is2440) { + /* Clear failure register and reset fifo. */ + writel(S3C2440_SDIFSTA_FIFORESET | + S3C2440_SDIFSTA_FIFOFAIL, + host->base + S3C2410_SDIFSTA); + } else { + u32 mci_con; + + /* reset fifo */ + mci_con = readl(host->base + S3C2410_SDICON); + mci_con |= S3C2410_SDICON_FIFORESET; + + writel(mci_con, host->base + S3C2410_SDICON); + } + } + +request_done: + host->complete_what = COMPLETION_NONE; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + + +void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) +{ + static enum s3c2410_dmasrc last_source = -1; + static int setup_ok; + + if (last_source == source) + return; + + last_source = source; + + s3c2410_dma_devconfig(host->dma, source, 3, + host->mem->start + host->sdidata); + + if (!setup_ok) { + s3c2410_dma_config(host->dma, 4, + (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_set_buffdone_fn(host->dma, + s3cmci_dma_done_callback); + s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); + setup_ok = 1; + } +} + +static void s3cmci_send_command(struct s3cmci_host *host, + struct mmc_command *cmd) +{ + u32 ccon, imsk; + + imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | + S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | + S3C2410_SDIIMSK_RESPONSECRC; + + enable_imask(host, imsk); + + if (cmd->data) + host->complete_what = COMPLETION_XFERFINISH_RSPFIN; + else if (cmd->flags & MMC_RSP_PRESENT) + host->complete_what = COMPLETION_RSPFIN; + else + host->complete_what = COMPLETION_CMDSENT; + + writel(cmd->arg, host->base + S3C2410_SDICMDARG); + + ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; + ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; + + if (cmd->flags & MMC_RSP_PRESENT) + ccon |= S3C2410_SDICMDCON_WAITRSP; + + if (cmd->flags & MMC_RSP_136) + ccon |= S3C2410_SDICMDCON_LONGRSP; + + writel(ccon, host->base + S3C2410_SDICMDCON); +} + +static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) +{ + u32 dcon, imsk, stoptries = 3; + + /* write DCON register */ + + if (!data) { + writel(0, host->base + S3C2410_SDIDCON); + return 0; + } + + if ((data->blksz & 3) != 0) { + /* We cannot deal with unaligned blocks with more than + * one block being transfered. */ + + if (data->blocks > 1) + return -EINVAL; + + /* No support yet for non-word block transfers. */ + return -EINVAL; + } + + while (readl(host->base + S3C2410_SDIDSTA) & + (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { + + dbg(host, dbg_err, + "mci_setup_data() transfer stillin progress.\n"); + + writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); + s3cmci_reset(host); + + if ((stoptries--) == 0) { + dbg_dumpregs(host, "DRF"); + return -EINVAL; + } + } + + dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; + + if (host->dodma) + dcon |= S3C2410_SDIDCON_DMAEN; + + if (host->bus_width == MMC_BUS_WIDTH_4) + dcon |= S3C2410_SDIDCON_WIDEBUS; + + if (!(data->flags & MMC_DATA_STREAM)) + dcon |= S3C2410_SDIDCON_BLOCKMODE; + + if (data->flags & MMC_DATA_WRITE) { + dcon |= S3C2410_SDIDCON_TXAFTERRESP; + dcon |= S3C2410_SDIDCON_XFER_TXSTART; + } + + if (data->flags & MMC_DATA_READ) { + dcon |= S3C2410_SDIDCON_RXAFTERCMD; + dcon |= S3C2410_SDIDCON_XFER_RXSTART; + } + + if (host->is2440) { + dcon |= S3C2440_SDIDCON_DS_WORD; + dcon |= S3C2440_SDIDCON_DATSTART; + } + + writel(dcon, host->base + S3C2410_SDIDCON); + + /* write BSIZE register */ + + writel(data->blksz, host->base + S3C2410_SDIBSIZE); + + /* add to IMASK register */ + imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | + S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; + + enable_imask(host, imsk); + + /* write TIMER register */ + + if (host->is2440) { + writel(0x007FFFFF, host->base + S3C2410_SDITIMER); + } else { + writel(0x0000FFFF, host->base + S3C2410_SDITIMER); + + /* FIX: set slow clock to prevent timeouts on read */ + if (data->flags & MMC_DATA_READ) + writel(0xFF, host->base + S3C2410_SDIPRE); + } + + return 0; +} + +#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) + +static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) +{ + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + host->pio_sgptr = 0; + host->pio_words = 0; + host->pio_count = 0; + host->pio_active = rw ? XFER_WRITE : XFER_READ; + + if (rw) { + do_pio_write(host); + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + } else { + enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF + | S3C2410_SDIIMSK_RXFIFOLAST); + } + + return 0; +} + +static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) +{ + int dma_len, i; + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_len == 0) + return -ENOMEM; + + host->dma_complete = 0; + host->dmatogo = dma_len; + + for (i = 0; i < dma_len; i++) { + int res; + + dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + res = s3c2410_dma_enqueue(host->dma, (void *) host, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + if (res) { + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + return -EBUSY; + } + } + + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); + + return 0; +} + +static void s3cmci_send_request(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + + host->ccnt++; + prepare_dbgmsg(host, cmd, host->cmd_is_stop); + + /* Clear command, data and fifo status registers + Fifo clear only necessary on 2440, but doesn't hurt on 2410 + */ + writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); + writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); + writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); + + if (cmd->data) { + int res = s3cmci_setup_data(host, cmd->data); + + host->dcnt++; + + if (res) { + dbg(host, dbg_err, "setup data error %d\n", res); + cmd->error = res; + cmd->data->error = res; + + mmc_request_done(mmc, mrq); + return; + } + + if (host->dodma) + res = s3cmci_prepare_dma(host, cmd->data); + else + res = s3cmci_prepare_pio(host, cmd->data); + + if (res) { + dbg(host, dbg_err, "data prepare error %d\n", res); + cmd->error = res; + cmd->data->error = res; + + mmc_request_done(mmc, mrq); + return; + } + } + + /* Send command */ + s3cmci_send_command(host, cmd); + + /* Enable Interrupt */ + enable_irq(host->irq); +} + +static int s3cmci_card_present(struct s3cmci_host *host) +{ + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; + + if (pdata->gpio_detect == 0) + return -ENOSYS; + + ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1; + return ret ^ pdata->detect_invert; +} + +static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + host->status = "mmc request"; + host->cmd_is_stop = 0; + host->mrq = mrq; + + if (s3cmci_card_present(host) == 0) { + dbg(host, dbg_err, "%s: no medium present\n", __func__); + host->mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + } else + s3cmci_send_request(mmc); +} + +static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct s3cmci_host *host = mmc_priv(mmc); + u32 mci_psc, mci_con; + + /* Set the power state */ + + mci_con = readl(host->base + S3C2410_SDICON); + + switch (ios->power_mode) { + case MMC_POWER_ON: + case MMC_POWER_UP: + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); + s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); + s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); + s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + + if (!host->is2440) + mci_con |= S3C2410_SDICON_FIFORESET; + + break; + + case MMC_POWER_OFF: + default: + s3c2410_gpio_setpin(S3C2410_GPE5, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + + if (host->is2440) + mci_con |= S3C2440_SDICON_SDRESET; + + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + + break; + } + + /* Set clock */ + for (mci_psc = 0; mci_psc < 255; mci_psc++) { + host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); + + if (host->real_rate <= ios->clock) + break; + } + + if (mci_psc > 255) + mci_psc = 255; + + host->prescaler = mci_psc; + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + /* If requested clock is 0, real_rate will be 0, too */ + if (ios->clock == 0) + host->real_rate = 0; + + /* Set CLOCK_ENABLE */ + if (ios->clock) + mci_con |= S3C2410_SDICON_CLOCKTYPE; + else + mci_con &= ~S3C2410_SDICON_CLOCKTYPE; + + writel(mci_con, host->base + S3C2410_SDICON); + + if ((ios->power_mode == MMC_POWER_ON) || + (ios->power_mode == MMC_POWER_UP)) { + dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", + host->real_rate/1000, ios->clock/1000); + } else { + dbg(host, dbg_conf, "powered down.\n"); + } + + host->bus_width = ios->bus_width; +} + +static void s3cmci_reset(struct s3cmci_host *host) +{ + u32 con = readl(host->base + S3C2410_SDICON); + + con |= S3C2440_SDICON_SDRESET; + writel(con, host->base + S3C2410_SDICON); +} + +static int s3cmci_get_ro(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; + + if (pdata->gpio_wprotect == 0) + return 0; + + ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); + + if (pdata->wprotect_invert) + ret = !ret; + + return ret; +} + +static struct mmc_host_ops s3cmci_ops = { + .request = s3cmci_request, + .set_ios = s3cmci_set_ios, + .get_ro = s3cmci_get_ro, +}; + +static struct s3c24xx_mci_pdata s3cmci_def_pdata = { + /* This is currently here to avoid a number of if (host->pdata) + * checks. Any zero fields to ensure reaonable defaults are picked. */ +}; + +static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + host->is2440 = is2440; + + host->pdata = pdev->dev.platform_data; + if (!host->pdata) { + pdev->dev.platform_data = &s3cmci_def_pdata; + host->pdata = &s3cmci_def_pdata; + } + + spin_lock_init(&host->complete_lock); + tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); + + if (is2440) { + host->sdiimsk = S3C2440_SDIIMSK; + host->sdidata = S3C2440_SDIDATA; + host->clk_div = 1; + } else { + host->sdiimsk = S3C2410_SDIIMSK; + host->sdidata = S3C2410_SDIDATA; + host->clk_div = 2; + } + + host->dodma = 0; + host->complete_what = COMPLETION_NONE; + host->pio_active = XFER_NONE; + + host->dma = S3CMCI_DMA; + + host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + + ret = -ENOENT; + goto probe_free_host; + } + + host->mem = request_mem_region(host->mem->start, + RESSIZE(host->mem), pdev->name); + + if (!host->mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_free_host; + } + + host->base = ioremap(host->mem->start, RESSIZE(host->mem)); + if (host->base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq == 0) { + dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + ret = -EINVAL; + goto probe_iounmap; + } + + if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, "failed to request mci interrupt.\n"); + ret = -ENOENT; + goto probe_iounmap; + } + + /* We get spurious interrupts even when we have set the IMSK + * register to ignore everything, so use disable_irq() to make + * ensure we don't lock the system with un-serviceable requests. */ + + disable_irq(host->irq); + + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + + if (host->irq_cd >= 0) { + if (request_irq(host->irq_cd, s3cmci_irq_cd, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + DRIVER_NAME, host)) { + dev_err(&pdev->dev, "can't get card detect irq.\n"); + ret = -ENOENT; + goto probe_free_irq; + } + } else { + dev_warn(&pdev->dev, "host detect has no irq available\n"); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, + S3C2410_GPIO_INPUT); + } + + if (host->pdata->gpio_wprotect) + s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, + S3C2410_GPIO_INPUT); + + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) { + dev_err(&pdev->dev, "unable to get DMA channel.\n"); + ret = -EBUSY; + goto probe_free_irq_cd; + } + + host->clk = clk_get(&pdev->dev, "sdi"); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "failed to find clock source.\n"); + ret = PTR_ERR(host->clk); + host->clk = NULL; + goto probe_free_host; + } + + ret = clk_enable(host->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock source.\n"); + goto clk_free; + } + + host->clk_rate = clk_get_rate(host->clk); + + mmc->ops = &s3cmci_ops; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->f_min = host->clk_rate / (host->clk_div * 256); + mmc->f_max = host->clk_rate / host->clk_div; + + if (host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + + mmc->max_blk_count = 4095; + mmc->max_blk_size = 4095; + mmc->max_req_size = 4095 * 512; + mmc->max_seg_size = mmc->max_req_size; + + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + dbg(host, dbg_debug, + "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", + (host->is2440?"2440":""), + host->base, host->irq, host->irq_cd, host->dma); + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto free_dmabuf; + } + + platform_set_drvdata(pdev, mmc); + dev_info(&pdev->dev, "initialisation done.\n"); + + return 0; + + free_dmabuf: + clk_disable(host->clk); + + clk_free: + clk_put(host->clk); + + probe_free_irq_cd: + if (host->irq_cd >= 0) + free_irq(host->irq_cd, host); + + probe_free_irq: + free_irq(host->irq, host); + + probe_iounmap: + iounmap(host->base); + + probe_free_mem_region: + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + probe_free_host: + mmc_free_host(mmc); + probe_out: + return ret; +} + +static int __devexit s3cmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct s3cmci_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + + clk_disable(host->clk); + clk_put(host->clk); + + tasklet_disable(&host->pio_tasklet); + s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); + + if (host->irq_cd >= 0) + free_irq(host->irq_cd, host); + free_irq(host->irq, host); + + iounmap(host->base); + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + mmc_free_host(mmc); + return 0; +} + +static int __devinit s3cmci_probe_2410(struct platform_device *dev) +{ + return s3cmci_probe(dev, 0); +} + +static int __devinit s3cmci_probe_2412(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +static int __devinit s3cmci_probe_2440(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +#ifdef CONFIG_PM + +static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_suspend_host(mmc, state); +} + +static int s3cmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_resume_host(mmc); +} + +#else /* CONFIG_PM */ +#define s3cmci_suspend NULL +#define s3cmci_resume NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver s3cmci_driver_2410 = { + .driver.name = "s3c2410-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2410, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2412 = { + .driver.name = "s3c2412-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2412, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2440 = { + .driver.name = "s3c2440-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2440, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + + +static int __init s3cmci_init(void) +{ + platform_driver_register(&s3cmci_driver_2410); + platform_driver_register(&s3cmci_driver_2412); + platform_driver_register(&s3cmci_driver_2440); + return 0; +} + +static void __exit s3cmci_exit(void) +{ + platform_driver_unregister(&s3cmci_driver_2410); + platform_driver_unregister(&s3cmci_driver_2412); + platform_driver_unregister(&s3cmci_driver_2440); +} + +module_init(s3cmci_init); +module_exit(s3cmci_exit); + +MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>"); +MODULE_ALIAS("platform:s3c2410-sdi"); +MODULE_ALIAS("platform:s3c2412-sdi"); +MODULE_ALIAS("platform:s3c2440-sdi"); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h new file mode 100644 index 000000000000..37d9c60010c9 --- /dev/null +++ b/drivers/mmc/host/s3cmci.h @@ -0,0 +1,70 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* FIXME: DMA Resource management ?! */ +#define S3CMCI_DMA 0 + +enum s3cmci_waitfor { + COMPLETION_NONE, + COMPLETION_FINALIZE, + COMPLETION_CMDSENT, + COMPLETION_RSPFIN, + COMPLETION_XFERFINISH, + COMPLETION_XFERFINISH_RSPFIN, +}; + +struct s3cmci_host { + struct platform_device *pdev; + struct s3c24xx_mci_pdata *pdata; + struct mmc_host *mmc; + struct resource *mem; + struct clk *clk; + void __iomem *base; + int irq; + int irq_cd; + int dma; + + unsigned long clk_rate; + unsigned long clk_div; + unsigned long real_rate; + u8 prescaler; + + int is2440; + unsigned sdiimsk; + unsigned sdidata; + int dodma; + int dmatogo; + + struct mmc_request *mrq; + int cmd_is_stop; + + spinlock_t complete_lock; + enum s3cmci_waitfor complete_what; + + int dma_complete; + + u32 pio_sgptr; + u32 pio_words; + u32 pio_count; + u32 *pio_ptr; +#define XFER_NONE 0 +#define XFER_READ 1 +#define XFER_WRITE 2 + u32 pio_active; + + int bus_width; + + char dbgmsg_cmd[301]; + char dbgmsg_dat[301]; + char *status; + + unsigned int ccnt, dcnt; + struct tasklet_struct pio_tasklet; +}; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c new file mode 100644 index 000000000000..deb607c52c0d --- /dev/null +++ b/drivers/mmc/host/sdhci-pci.c @@ -0,0 +1,732 @@ +/* linux/drivers/mmc/host/sdhci-pci.c - SDHCI on PCI bus interface + * + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) + */ + +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> + +#include <linux/mmc/host.h> + +#include <asm/scatterlist.h> +#include <asm/io.h> + +#include "sdhci.h" + +/* + * PCI registers + */ + +#define PCI_SDHCI_IFPIO 0x00 +#define PCI_SDHCI_IFDMA 0x01 +#define PCI_SDHCI_IFVENDOR 0x02 + +#define PCI_SLOT_INFO 0x40 /* 8 bits */ +#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) +#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 + +#define MAX_SLOTS 8 + +struct sdhci_pci_chip; +struct sdhci_pci_slot; + +struct sdhci_pci_fixes { + unsigned int quirks; + + int (*probe)(struct sdhci_pci_chip*); + + int (*probe_slot)(struct sdhci_pci_slot*); + void (*remove_slot)(struct sdhci_pci_slot*, int); + + int (*suspend)(struct sdhci_pci_chip*, + pm_message_t); + int (*resume)(struct sdhci_pci_chip*); +}; + +struct sdhci_pci_slot { + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + + int pci_bar; +}; + +struct sdhci_pci_chip { + struct pci_dev *pdev; + + unsigned int quirks; + const struct sdhci_pci_fixes *fixes; + + int num_slots; /* Slots on controller */ + struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ +}; + + +/*****************************************************************************\ + * * + * Hardware specific quirk handling * + * * +\*****************************************************************************/ + +static int ricoh_probe(struct sdhci_pci_chip *chip) +{ + if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) + chip->quirks |= SDHCI_QUIRK_CLOCK_BEFORE_RESET; + + if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) + chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET; + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_ricoh = { + .probe = ricoh_probe, + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR, +}; + +static const struct sdhci_pci_fixes sdhci_ene_712 = { + .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_BROKEN_DMA, +}; + +static const struct sdhci_pci_fixes sdhci_ene_714 = { + .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, +}; + +static const struct sdhci_pci_fixes sdhci_cafe = { + .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, +}; + +static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) +{ + u8 scratch; + int ret; + + ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch); + if (ret) + return ret; + + /* + * Turn PMOS on [bit 0], set over current detection to 2.4 V + * [bit 1:2] and enable over current debouncing [bit 6]. + */ + if (on) + scratch |= 0x47; + else + scratch &= ~0x47; + + ret = pci_write_config_byte(chip->pdev, 0xAE, scratch); + if (ret) + return ret; + + return 0; +} + +static int jmicron_probe(struct sdhci_pci_chip *chip) +{ + int ret; + + if (chip->pdev->revision == 0) { + chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_32BIT_ADMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST; + } + + /* + * JMicron chips can have two interfaces to the same hardware + * in order to work around limitations in Microsoft's driver. + * We need to make sure we only bind to one of them. + * + * This code assumes two things: + * + * 1. The PCI code adds subfunctions in order. + * + * 2. The MMC interface has a lower subfunction number + * than the SD interface. + */ + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) { + struct pci_dev *sd_dev; + + sd_dev = NULL; + while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON, + PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) { + if ((PCI_SLOT(chip->pdev->devfn) == + PCI_SLOT(sd_dev->devfn)) && + (chip->pdev->bus == sd_dev->bus)) + break; + } + + if (sd_dev) { + pci_dev_put(sd_dev); + dev_info(&chip->pdev->dev, "Refusing to bind to " + "secondary interface.\n"); + return -ENODEV; + } + } + + /* + * JMicron chips need a bit of a nudge to enable the power + * output pins. + */ + ret = jmicron_pmos(chip, 1); + if (ret) { + dev_err(&chip->pdev->dev, "Failure enabling card power\n"); + return ret; + } + + return 0; +} + +static void jmicron_enable_mmc(struct sdhci_host *host, int on) +{ + u8 scratch; + + scratch = readb(host->ioaddr + 0xC0); + + if (on) + scratch |= 0x01; + else + scratch &= ~0x01; + + writeb(scratch, host->ioaddr + 0xC0); +} + +static int jmicron_probe_slot(struct sdhci_pci_slot *slot) +{ + if (slot->chip->pdev->revision == 0) { + u16 version; + + version = readl(slot->host->ioaddr + SDHCI_HOST_VERSION); + version = (version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT; + + /* + * Older versions of the chip have lots of nasty glitches + * in the ADMA engine. It's best just to avoid it + * completely. + */ + if (version < 0xAC) + slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; + } + + /* + * The secondary interface requires a bit set to get the + * interrupts. + */ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 1); + + return 0; +} + +static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) +{ + if (dead) + return; + + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 0); +} + +static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +{ + int i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 0); + } + + return 0; +} + +static int jmicron_resume(struct sdhci_pci_chip *chip) +{ + int ret, i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 1); + } + + ret = jmicron_pmos(chip, 1); + if (ret) { + dev_err(&chip->pdev->dev, "Failure enabling card power\n"); + return ret; + } + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_jmicron = { + .probe = jmicron_probe, + + .probe_slot = jmicron_probe_slot, + .remove_slot = jmicron_remove_slot, + + .suspend = jmicron_suspend, + .resume = jmicron_resume, +}; + +static const struct pci_device_id pci_ids[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ricoh, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB712_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ene_712, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB712_SD_2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ene_712, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB714_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ene_714, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB714_SD_2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ene_714, + }, + + { + .vendor = PCI_VENDOR_ID_MARVELL, + .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_cafe, + }, + + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_MMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + + { /* Generic SD host controller */ + PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) + }, + + { /* end: all zeroes */ }, +}; + +MODULE_DEVICE_TABLE(pci, pci_ids); + +/*****************************************************************************\ + * * + * SDHCI core callbacks * + * * +\*****************************************************************************/ + +static int sdhci_pci_enable_dma(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot; + struct pci_dev *pdev; + int ret; + + slot = sdhci_priv(host); + pdev = slot->chip->pdev; + + if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) && + ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) && + (host->flags & SDHCI_USE_DMA)) { + dev_warn(&pdev->dev, "Will use DMA mode even though HW " + "doesn't fully claim to support it.\n"); + } + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret) + return ret; + + pci_set_master(pdev); + + return 0; +} + +static struct sdhci_ops sdhci_pci_ops = { + .enable_dma = sdhci_pci_enable_dma, +}; + +/*****************************************************************************\ + * * + * Suspend/resume * + * * +\*****************************************************************************/ + +#ifdef CONFIG_PM + +static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + for (i = 0;i < chip->num_slots;i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_suspend_host(slot->host, state); + + if (ret) { + for (i--;i >= 0;i--) + sdhci_resume_host(chip->slots[i]->host); + return ret; + } + } + + if (chip->fixes && chip->fixes->suspend) { + ret = chip->fixes->suspend(chip, state); + if (ret) { + for (i = chip->num_slots - 1;i >= 0;i--) + sdhci_resume_host(chip->slots[i]->host); + return ret; + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int sdhci_pci_resume (struct pci_dev *pdev) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (chip->fixes && chip->fixes->resume) { + ret = chip->fixes->resume(chip); + if (ret) + return ret; + } + + for (i = 0;i < chip->num_slots;i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_resume_host(slot->host); + if (ret) + return ret; + } + + return 0; +} + +#else /* CONFIG_PM */ + +#define sdhci_pci_suspend NULL +#define sdhci_pci_resume NULL + +#endif /* CONFIG_PM */ + +/*****************************************************************************\ + * * + * Device probing/removal * + * * +\*****************************************************************************/ + +static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( + struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar) +{ + struct sdhci_pci_slot *slot; + struct sdhci_host *host; + + resource_size_t addr; + + int ret; + + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { + dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); + return ERR_PTR(-ENODEV); + } + + if (pci_resource_len(pdev, bar) != 0x100) { + dev_err(&pdev->dev, "Invalid iomem size. You may " + "experience problems.\n"); + } + + if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { + dev_err(&pdev->dev, "Vendor specific interface. Aborting.\n"); + return ERR_PTR(-ENODEV); + } + + if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { + dev_err(&pdev->dev, "Unknown interface. Aborting.\n"); + return ERR_PTR(-ENODEV); + } + + host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); + if (IS_ERR(host)) { + ret = PTR_ERR(host); + goto unmap; + } + + slot = sdhci_priv(host); + + slot->chip = chip; + slot->host = host; + slot->pci_bar = bar; + + host->hw_name = "PCI"; + host->ops = &sdhci_pci_ops; + host->quirks = chip->quirks; + + host->irq = pdev->irq; + + ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); + if (ret) { + dev_err(&pdev->dev, "cannot request region\n"); + return ERR_PTR(ret); + } + + addr = pci_resource_start(pdev, bar); + host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar)); + if (!host->ioaddr) { + dev_err(&pdev->dev, "failed to remap registers\n"); + goto release; + } + + if (chip->fixes && chip->fixes->probe_slot) { + ret = chip->fixes->probe_slot(slot); + if (ret) + goto unmap; + } + + ret = sdhci_add_host(host); + if (ret) + goto remove; + + return slot; + +remove: + if (chip->fixes && chip->fixes->remove_slot) + chip->fixes->remove_slot(slot, 0); + +unmap: + iounmap(host->ioaddr); + +release: + pci_release_region(pdev, bar); + sdhci_free_host(host); + + return ERR_PTR(ret); +} + +static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) +{ + int dead; + u32 scratch; + + dead = 0; + scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS); + if (scratch == (u32)-1) + dead = 1; + + sdhci_remove_host(slot->host, dead); + + if (slot->chip->fixes && slot->chip->fixes->remove_slot) + slot->chip->fixes->remove_slot(slot, dead); + + pci_release_region(slot->chip->pdev, slot->pci_bar); + + sdhci_free_host(slot->host); +} + +static int __devinit sdhci_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + + u8 slots, rev, first_bar; + int ret, i; + + BUG_ON(pdev == NULL); + BUG_ON(ent == NULL); + + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); + + dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n", + (int)pdev->vendor, (int)pdev->device, (int)rev); + + ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); + if (ret) + return ret; + + slots = PCI_SLOT_INFO_SLOTS(slots) + 1; + dev_dbg(&pdev->dev, "found %d slot(s)\n", slots); + if (slots == 0) + return -ENODEV; + + BUG_ON(slots > MAX_SLOTS); + + ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); + if (ret) + return ret; + + first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; + + if (first_bar > 5) { + dev_err(&pdev->dev, "Invalid first BAR. Aborting.\n"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + goto err; + } + + chip->pdev = pdev; + chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data; + if (chip->fixes) + chip->quirks = chip->fixes->quirks; + chip->num_slots = slots; + + pci_set_drvdata(pdev, chip); + + if (chip->fixes && chip->fixes->probe) { + ret = chip->fixes->probe(chip); + if (ret) + goto free; + } + + for (i = 0;i < slots;i++) { + slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i); + if (IS_ERR(slot)) { + for (i--;i >= 0;i--) + sdhci_pci_remove_slot(chip->slots[i]); + ret = PTR_ERR(slot); + goto free; + } + + chip->slots[i] = slot; + } + + return 0; + +free: + pci_set_drvdata(pdev, NULL); + kfree(chip); + +err: + pci_disable_device(pdev); + return ret; +} + +static void __devexit sdhci_pci_remove(struct pci_dev *pdev) +{ + int i; + struct sdhci_pci_chip *chip; + + chip = pci_get_drvdata(pdev); + + if (chip) { + for (i = 0;i < chip->num_slots; i++) + sdhci_pci_remove_slot(chip->slots[i]); + + pci_set_drvdata(pdev, NULL); + kfree(chip); + } + + pci_disable_device(pdev); +} + +static struct pci_driver sdhci_driver = { + .name = "sdhci-pci", + .id_table = pci_ids, + .probe = sdhci_pci_probe, + .remove = __devexit_p(sdhci_pci_remove), + .suspend = sdhci_pci_suspend, + .resume = sdhci_pci_resume, +}; + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdhci_drv_init(void) +{ + return pci_register_driver(&sdhci_driver); +} + +static void __exit sdhci_drv_exit(void) +{ + pci_unregister_driver(&sdhci_driver); +} + +module_init(sdhci_drv_init); +module_exit(sdhci_drv_exit); + +MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); +MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b413aa6c246b..17701c3da733 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -15,7 +15,7 @@ #include <linux/delay.h> #include <linux/highmem.h> -#include <linux/pci.h> +#include <linux/io.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> @@ -32,135 +32,6 @@ static unsigned int debug_quirks = 0; -/* - * Different quirks to handle when the hardware deviates from a strict - * interpretation of the SDHCI specification. - */ - -/* Controller doesn't honor resets unless we touch the clock register */ -#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) -/* Controller has bad caps bits, but really supports DMA */ -#define SDHCI_QUIRK_FORCE_DMA (1<<1) -/* Controller doesn't like to be reset when there is no card inserted. */ -#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) -/* Controller doesn't like clearing the power reg before a change */ -#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) -/* Controller has flaky internal state so reset it on each ios change */ -#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) -/* Controller has an unusable DMA engine */ -#define SDHCI_QUIRK_BROKEN_DMA (1<<5) -/* Controller can only DMA from 32-bit aligned addresses */ -#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) -/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ -#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) -/* Controller needs to be reset after each request to stay stable */ -#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) -/* Controller needs voltage and power writes to happen separately */ -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) -/* Controller has an off-by-one issue with timeout value */ -#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) - -static const struct pci_device_id pci_ids[] __devinitdata = { - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | - SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_SAMSUNG, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA | - SDHCI_QUIRK_NO_CARD_NO_RESET, - }, - - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_TI, - .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB712_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB712_SD_2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB714_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB714_SD_2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_MARVELL, - .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | - SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, - }, - - { - .vendor = PCI_VENDOR_ID_JMICRON, - .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_32BIT_DMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST, - }, - - { /* Generic SD host controller */ - PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) - }, - - { /* end: all zeroes */ }, -}; - -MODULE_DEVICE_TABLE(pci, pci_ids); - static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *); static void sdhci_finish_data(struct sdhci_host *); @@ -215,7 +86,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) { unsigned long timeout; - if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { + if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) return; @@ -253,7 +124,8 @@ static void sdhci_init(struct sdhci_host *host) SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT | SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | - SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE; + SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE | + SDHCI_INT_ADMA_ERROR; writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); @@ -443,23 +315,226 @@ static void sdhci_transfer_pio(struct sdhci_host *host) DBG("PIO transfer complete.\n"); } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) { - u8 count; - unsigned target_timeout, current_timeout; + local_irq_save(*flags); + return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; +} - WARN_ON(host->data); +static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags) +{ + kunmap_atomic(buffer, KM_BIO_SRC_IRQ); + local_irq_restore(*flags); +} - if (data == NULL) - return; +static int sdhci_adma_table_pre(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; - /* Sanity checks */ - BUG_ON(data->blksz * data->blocks > 524288); - BUG_ON(data->blksz > host->mmc->max_blk_size); - BUG_ON(data->blocks > 65535); + u8 *desc; + u8 *align; + dma_addr_t addr; + dma_addr_t align_addr; + int len, offset; - host->data = data; - host->data_early = 0; + struct scatterlist *sg; + int i; + char *buffer; + unsigned long flags; + + /* + * The spec does not specify endianness of descriptor table. + * We currently guess that it is LE. + */ + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + /* + * The ADMA descriptor table is mapped further down as we + * need to fill it with data first. + */ + + host->align_addr = dma_map_single(mmc_dev(host->mmc), + host->align_buffer, 128 * 4, direction); + if (dma_mapping_error(host->align_addr)) + goto fail; + BUG_ON(host->align_addr & 0x3); + + host->sg_count = dma_map_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, direction); + if (host->sg_count == 0) + goto unmap_align; + + desc = host->adma_desc; + align = host->align_buffer; + + align_addr = host->align_addr; + + for_each_sg(data->sg, sg, host->sg_count, i) { + addr = sg_dma_address(sg); + len = sg_dma_len(sg); + + /* + * The SDHCI specification states that ADMA + * addresses must be 32-bit aligned. If they + * aren't, then we use a bounce buffer for + * the (up to three) bytes that screw up the + * alignment. + */ + offset = (4 - (addr & 0x3)) & 0x3; + if (offset) { + if (data->flags & MMC_DATA_WRITE) { + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(align, buffer, offset); + sdhci_kunmap_atomic(buffer, &flags); + } + + desc[7] = (align_addr >> 24) & 0xff; + desc[6] = (align_addr >> 16) & 0xff; + desc[5] = (align_addr >> 8) & 0xff; + desc[4] = (align_addr >> 0) & 0xff; + + BUG_ON(offset > 65536); + + desc[3] = (offset >> 8) & 0xff; + desc[2] = (offset >> 0) & 0xff; + + desc[1] = 0x00; + desc[0] = 0x21; /* tran, valid */ + + align += 4; + align_addr += 4; + + desc += 8; + + addr += offset; + len -= offset; + } + + desc[7] = (addr >> 24) & 0xff; + desc[6] = (addr >> 16) & 0xff; + desc[5] = (addr >> 8) & 0xff; + desc[4] = (addr >> 0) & 0xff; + + BUG_ON(len > 65536); + + desc[3] = (len >> 8) & 0xff; + desc[2] = (len >> 0) & 0xff; + + desc[1] = 0x00; + desc[0] = 0x21; /* tran, valid */ + + desc += 8; + + /* + * If this triggers then we have a calculation bug + * somewhere. :/ + */ + WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4); + } + + /* + * Add a terminating entry. + */ + desc[7] = 0; + desc[6] = 0; + desc[5] = 0; + desc[4] = 0; + + desc[3] = 0; + desc[2] = 0; + + desc[1] = 0x00; + desc[0] = 0x03; /* nop, end, valid */ + + /* + * Resync align buffer as we might have changed it. + */ + if (data->flags & MMC_DATA_WRITE) { + dma_sync_single_for_device(mmc_dev(host->mmc), + host->align_addr, 128 * 4, direction); + } + + host->adma_addr = dma_map_single(mmc_dev(host->mmc), + host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); + if (dma_mapping_error(host->align_addr)) + goto unmap_entries; + BUG_ON(host->adma_addr & 0x3); + + return 0; + +unmap_entries: + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); +unmap_align: + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + 128 * 4, direction); +fail: + return -EINVAL; +} + +static void sdhci_adma_table_post(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; + + struct scatterlist *sg; + int i, size; + u8 *align; + char *buffer; + unsigned long flags; + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + dma_unmap_single(mmc_dev(host->mmc), host->adma_addr, + (128 * 2 + 1) * 4, DMA_TO_DEVICE); + + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + 128 * 4, direction); + + if (data->flags & MMC_DATA_READ) { + dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); + + align = host->align_buffer; + + for_each_sg(data->sg, sg, host->sg_count, i) { + if (sg_dma_address(sg) & 0x3) { + size = 4 - (sg_dma_address(sg) & 0x3); + + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(buffer, align, size); + sdhci_kunmap_atomic(buffer, &flags); + + align += 4; + } + } + } + + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); +} + +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) +{ + u8 count; + unsigned target_timeout, current_timeout; + + /* + * If the host controller provides us with an incorrect timeout + * value, just skip the check and use 0xE. The hardware may take + * longer to time out, but that's much better than having a too-short + * timeout value. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)) + return 0xE; /* timeout in us */ target_timeout = data->timeout_ns / 1000 + @@ -484,52 +559,158 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) break; } - /* - * Compensate for an off-by-one error in the CaFe hardware; otherwise, - * a too-small count gives us interrupt timeouts. - */ - if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) - count++; - if (count >= 0xF) { printk(KERN_WARNING "%s: Too large timeout requested!\n", mmc_hostname(host->mmc)); count = 0xE; } + return count; +} + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +{ + u8 count; + u8 ctrl; + int ret; + + WARN_ON(host->data); + + if (data == NULL) + return; + + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > 65535); + + host->data = data; + host->data_early = 0; + + count = sdhci_calc_timeout(host, data); writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); if (host->flags & SDHCI_USE_DMA) host->flags |= SDHCI_REQ_USE_DMA; - if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && - ((data->blksz * data->blocks) & 0x3))) { - DBG("Reverting to PIO because of transfer size (%d)\n", - data->blksz * data->blocks); - host->flags &= ~SDHCI_REQ_USE_DMA; + /* + * FIXME: This doesn't account for merging when mapping the + * scatterlist. + */ + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->length & 0x3) { + DBG("Reverting to PIO because of " + "transfer size (%d)\n", + sg->length); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } } /* * The assumption here being that alignment is the same after * translation to device address space. */ - if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && - (data->sg->offset & 0x3))) { - DBG("Reverting to PIO because of bad alignment\n"); - host->flags &= ~SDHCI_REQ_USE_DMA; + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + /* + * As we use 3 byte chunks to work around + * alignment problems, we need to check this + * quirk. + */ + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 0x3) { + DBG("Reverting to PIO because of " + "bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } } if (host->flags & SDHCI_REQ_USE_DMA) { - int count; + if (host->flags & SDHCI_USE_ADMA) { + ret = sdhci_adma_table_pre(host, data); + if (ret) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_USE_DMA; + } else { + writel(host->adma_addr, + host->ioaddr + SDHCI_ADMA_ADDRESS); + } + } else { + int sg_cnt; + + sg_cnt = dma_map_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : + DMA_TO_DEVICE); + if (sg_cnt == 0) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_USE_DMA; + } else { + WARN_ON(count != 1); + writel(sg_dma_address(data->sg), + host->ioaddr + SDHCI_DMA_ADDRESS); + } + } + } - count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, - (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); - BUG_ON(count != 1); + /* + * Always adjust the DMA selection as some controllers + * (e.g. JMicron) can't do PIO properly when the selection + * is ADMA. + */ + if (host->version >= SDHCI_SPEC_200) { + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + if ((host->flags & SDHCI_REQ_USE_DMA) && + (host->flags & SDHCI_USE_ADMA)) + ctrl |= SDHCI_CTRL_ADMA32; + else + ctrl |= SDHCI_CTRL_SDMA; + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); + } - writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS); - } else { + if (!(host->flags & SDHCI_REQ_USE_DMA)) { host->cur_sg = data->sg; host->num_sg = data->sg_len; @@ -567,7 +748,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, static void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; - u16 blocks; BUG_ON(!host->data); @@ -575,25 +755,26 @@ static void sdhci_finish_data(struct sdhci_host *host) host->data = NULL; if (host->flags & SDHCI_REQ_USE_DMA) { - pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, - (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); + if (host->flags & SDHCI_USE_ADMA) + sdhci_adma_table_post(host, data); + else { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + } } /* - * Controller doesn't count down when in single block mode. + * The specification states that the block count register must + * be updated, but it does not specify at what point in the + * data flow. That makes the register entirely useless to read + * back so we have to assume that nothing made it to the card + * in the event of an error. */ - if (data->blocks == 1) - blocks = (data->error == 0) ? 0 : 1; + if (data->error) + data->bytes_xfered = 0; else - blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT); - data->bytes_xfered = data->blksz * (data->blocks - blocks); - - if (!data->error && blocks) { - printk(KERN_ERR "%s: Controller signalled completion even " - "though there were blocks left.\n", - mmc_hostname(host->mmc)); - data->error = -EIO; - } + data->bytes_xfered = data->blksz * data->blocks; if (data->stop) { /* @@ -775,7 +956,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) * Spec says that we should clear the power reg before setting * a new value. Some controllers don't seem to like this though. */ - if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); pwr = SDHCI_POWER_ON; @@ -797,10 +978,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) } /* - * At least the CaFe chip gets confused if we set the voltage + * At least the Marvell CaFe chip gets confused if we set the voltage * and set turn on power at the same time, so set the voltage first. */ - if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) + if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) writeb(pwr & ~SDHCI_POWER_ON, host->ioaddr + SDHCI_POWER_CONTROL); @@ -833,7 +1014,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; - if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { + if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT) + || (host->flags & SDHCI_DEVICE_DEAD)) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); } else @@ -853,6 +1035,9 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_DEVICE_DEAD) + goto out; + /* * Reset the chip on each power off. * Should clear out any weird states. @@ -888,9 +1073,10 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * signalling timeout and CRC errors even on CMD0. Resetting * it on each ios seems to solve the problem. */ - if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) + if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); +out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); } @@ -905,7 +1091,10 @@ static int sdhci_get_ro(struct mmc_host *mmc) spin_lock_irqsave(&host->lock, flags); - present = readl(host->ioaddr + SDHCI_PRESENT_STATE); + if (host->flags & SDHCI_DEVICE_DEAD) + present = 0; + else + present = readl(host->ioaddr + SDHCI_PRESENT_STATE); spin_unlock_irqrestore(&host->lock, flags); @@ -922,6 +1111,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_DEVICE_DEAD) + goto out; + ier = readl(host->ioaddr + SDHCI_INT_ENABLE); ier &= ~SDHCI_INT_CARD_INT; @@ -931,6 +1123,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) writel(ier, host->ioaddr + SDHCI_INT_ENABLE); writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE); +out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); @@ -996,13 +1189,14 @@ static void sdhci_tasklet_finish(unsigned long param) * The controller needs a reset of internal state machines * upon error conditions. */ - if (mrq->cmd->error || - (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error))) || - (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { + if (!(host->flags & SDHCI_DEVICE_DEAD) && + (mrq->cmd->error || + (mrq->data && (mrq->data->error || + (mrq->data->stop && mrq->data->stop->error))) || + (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { /* Some controllers need this kick or reset won't work here */ - if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { + if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { unsigned int clock; /* This is to force an update */ @@ -1116,6 +1310,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) host->data->error = -ETIMEDOUT; else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) host->data->error = -EILSEQ; + else if (intmask & SDHCI_INT_ADMA_ERROR) + host->data->error = -EIO; if (host->data->error) sdhci_finish_data(host); @@ -1234,218 +1430,167 @@ out: #ifdef CONFIG_PM -static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state) +int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) { - struct sdhci_chip *chip; - int i, ret; - - chip = pci_get_drvdata(pdev); - if (!chip) - return 0; - - DBG("Suspending...\n"); - - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - ret = mmc_suspend_host(chip->hosts[i]->mmc, state); - if (ret) { - for (i--;i >= 0;i--) - mmc_resume_host(chip->hosts[i]->mmc); - return ret; - } - } - - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + int ret; - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - free_irq(chip->hosts[i]->irq, chip->hosts[i]); - } + ret = mmc_suspend_host(host->mmc, state); + if (ret) + return ret; - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + free_irq(host->irq, host); return 0; } -static int sdhci_resume (struct pci_dev *pdev) -{ - struct sdhci_chip *chip; - int i, ret; +EXPORT_SYMBOL_GPL(sdhci_suspend_host); - chip = pci_get_drvdata(pdev); - if (!chip) - return 0; +int sdhci_resume_host(struct sdhci_host *host) +{ + int ret; - DBG("Resuming...\n"); + if (host->flags & SDHCI_USE_DMA) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); + ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); if (ret) return ret; - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - if (chip->hosts[i]->flags & SDHCI_USE_DMA) - pci_set_master(pdev); - ret = request_irq(chip->hosts[i]->irq, sdhci_irq, - IRQF_SHARED, mmc_hostname(chip->hosts[i]->mmc), - chip->hosts[i]); - if (ret) - return ret; - sdhci_init(chip->hosts[i]); - mmiowb(); - ret = mmc_resume_host(chip->hosts[i]->mmc); - if (ret) - return ret; - } + sdhci_init(host); + mmiowb(); + + ret = mmc_resume_host(host->mmc); + if (ret) + return ret; return 0; } -#else /* CONFIG_PM */ - -#define sdhci_suspend NULL -#define sdhci_resume NULL +EXPORT_SYMBOL_GPL(sdhci_resume_host); #endif /* CONFIG_PM */ /*****************************************************************************\ * * - * Device probing/removal * + * Device allocation/registration * * * \*****************************************************************************/ -static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) +struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size) { - int ret; - unsigned int version; - struct sdhci_chip *chip; struct mmc_host *mmc; struct sdhci_host *host; - u8 first_bar; - unsigned int caps; - - chip = pci_get_drvdata(pdev); - BUG_ON(!chip); - - ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); - if (ret) - return ret; - - first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; - - if (first_bar > 5) { - printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n"); - return -ENODEV; - } - - if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) { - printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n"); - return -ENODEV; - } - - if (pci_resource_len(pdev, first_bar + slot) != 0x100) { - printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. " - "You may experience problems.\n"); - } - - if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { - printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n"); - return -ENODEV; - } - - if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { - printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n"); - return -ENODEV; - } + WARN_ON(dev == NULL); - mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev); if (!mmc) - return -ENOMEM; + return ERR_PTR(-ENOMEM); host = mmc_priv(mmc); host->mmc = mmc; - host->chip = chip; - chip->hosts[slot] = host; + return host; +} - host->bar = first_bar + slot; +EXPORT_SYMBOL_GPL(sdhci_alloc_host); - host->addr = pci_resource_start(pdev, host->bar); - host->irq = pdev->irq; +int sdhci_add_host(struct sdhci_host *host) +{ + struct mmc_host *mmc; + unsigned int caps; + int ret; - DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq); + WARN_ON(host == NULL); + if (host == NULL) + return -EINVAL; - ret = pci_request_region(pdev, host->bar, mmc_hostname(mmc)); - if (ret) - goto free; + mmc = host->mmc; - host->ioaddr = ioremap_nocache(host->addr, - pci_resource_len(pdev, host->bar)); - if (!host->ioaddr) { - ret = -ENOMEM; - goto release; - } + if (debug_quirks) + host->quirks = debug_quirks; sdhci_reset(host, SDHCI_RESET_ALL); - version = readw(host->ioaddr + SDHCI_HOST_VERSION); - version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (version > 1) { + host->version = readw(host->ioaddr + SDHCI_HOST_VERSION); + host->version = (host->version & SDHCI_SPEC_VER_MASK) + >> SDHCI_SPEC_VER_SHIFT; + if (host->version > SDHCI_SPEC_200) { printk(KERN_ERR "%s: Unknown controller version (%d). " "You may experience problems.\n", mmc_hostname(mmc), - version); + host->version); } caps = readl(host->ioaddr + SDHCI_CAPABILITIES); - if (chip->quirks & SDHCI_QUIRK_FORCE_DMA) + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_DMA; else if (!(caps & SDHCI_CAN_DO_DMA)) DBG("Controller doesn't have DMA capability\n"); else host->flags |= SDHCI_USE_DMA; - if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) && + if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) && (host->flags & SDHCI_USE_DMA)) { DBG("Disabling DMA as it is marked broken\n"); host->flags &= ~SDHCI_USE_DMA; } - if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) && - (host->flags & SDHCI_USE_DMA)) { - printk(KERN_WARNING "%s: Will use DMA " - "mode even though HW doesn't fully " - "claim to support it.\n", mmc_hostname(mmc)); + if (host->flags & SDHCI_USE_DMA) { + if ((host->version >= SDHCI_SPEC_200) && + (caps & SDHCI_CAN_DO_ADMA2)) + host->flags |= SDHCI_USE_ADMA; + } + + if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && + (host->flags & SDHCI_USE_ADMA)) { + DBG("Disabling ADMA as it is marked broken\n"); + host->flags &= ~SDHCI_USE_ADMA; } if (host->flags & SDHCI_USE_DMA) { - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { - printk(KERN_WARNING "%s: No suitable DMA available. " - "Falling back to PIO.\n", mmc_hostname(mmc)); - host->flags &= ~SDHCI_USE_DMA; + if (host->ops->enable_dma) { + if (host->ops->enable_dma(host)) { + printk(KERN_WARNING "%s: No suitable DMA " + "available. Falling back to PIO.\n", + mmc_hostname(mmc)); + host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA); + } } } - if (host->flags & SDHCI_USE_DMA) - pci_set_master(pdev); - else /* XXX: Hack to get MMC layer to avoid highmem */ - pdev->dma_mask = 0; + if (host->flags & SDHCI_USE_ADMA) { + /* + * We need to allocate descriptors for all sg entries + * (128) and potentially one alignment transfer for + * each of those entries. + */ + host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL); + host->align_buffer = kmalloc(128 * 4, GFP_KERNEL); + if (!host->adma_desc || !host->align_buffer) { + kfree(host->adma_desc); + kfree(host->align_buffer); + printk(KERN_WARNING "%s: Unable to allocate ADMA " + "buffers. Falling back to standard DMA.\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + } + } + + /* XXX: Hack to get MMC layer to avoid highmem */ + if (!(host->flags & SDHCI_USE_DMA)) + mmc_dev(host->mmc)->dma_mask = NULL; host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; if (host->max_clk == 0) { printk(KERN_ERR "%s: Hardware doesn't specify base clock " "frequency.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } host->max_clk *= 1000000; @@ -1454,8 +1599,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (host->timeout_clk == 0) { printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " "frequency.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } if (caps & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; @@ -1466,7 +1610,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc->ops = &sdhci_ops; mmc->f_min = host->max_clk / 256; mmc->f_max = host->max_clk; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; @@ -1482,20 +1626,22 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " "support voltages.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } spin_lock_init(&host->lock); /* - * Maximum number of segments. Hardware cannot do scatter lists. + * Maximum number of segments. Depends on if the hardware + * can do scatter/gather or not. */ - if (host->flags & SDHCI_USE_DMA) + if (host->flags & SDHCI_USE_ADMA) + mmc->max_hw_segs = 128; + else if (host->flags & SDHCI_USE_DMA) mmc->max_hw_segs = 1; - else - mmc->max_hw_segs = 16; - mmc->max_phys_segs = 16; + else /* PIO */ + mmc->max_hw_segs = 128; + mmc->max_phys_segs = 128; /* * Maximum number of sectors in one transfer. Limited by DMA boundary @@ -1505,9 +1651,13 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) /* * Maximum segment size. Could be one segment with the maximum number - * of bytes. + * of bytes. When doing hardware scatter/gather, each entry cannot + * be larger than 64 KiB though. */ - mmc->max_seg_size = mmc->max_req_size; + if (host->flags & SDHCI_USE_ADMA) + mmc->max_seg_size = 65536; + else + mmc->max_seg_size = mmc->max_req_size; /* * Maximum block size. This varies from controller to controller and @@ -1553,7 +1703,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; - ret = led_classdev_register(&pdev->dev, &host->led); + ret = led_classdev_register(mmc_dev(mmc), &host->led); if (ret) goto reset; #endif @@ -1562,8 +1712,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc_add_host(mmc); - printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n", - mmc_hostname(mmc), host->addr, host->irq, + printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n", + mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id, + (host->flags & SDHCI_USE_ADMA)?"A":"", (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); return 0; @@ -1576,35 +1727,40 @@ reset: untasklet: tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); -unmap: - iounmap(host->ioaddr); -release: - pci_release_region(pdev, host->bar); -free: - mmc_free_host(mmc); return ret; } -static void sdhci_remove_slot(struct pci_dev *pdev, int slot) +EXPORT_SYMBOL_GPL(sdhci_add_host); + +void sdhci_remove_host(struct sdhci_host *host, int dead) { - struct sdhci_chip *chip; - struct mmc_host *mmc; - struct sdhci_host *host; + unsigned long flags; - chip = pci_get_drvdata(pdev); - host = chip->hosts[slot]; - mmc = host->mmc; + if (dead) { + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_DEVICE_DEAD; + + if (host->mrq) { + printk(KERN_ERR "%s: Controller removed during " + " transfer!\n", mmc_hostname(host->mmc)); - chip->hosts[slot] = NULL; + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); + } - mmc_remove_host(mmc); + mmc_remove_host(host->mmc); #ifdef CONFIG_LEDS_CLASS led_classdev_unregister(&host->led); #endif - sdhci_reset(host, SDHCI_RESET_ALL); + if (!dead) + sdhci_reset(host, SDHCI_RESET_ALL); free_irq(host->irq, host); @@ -1613,106 +1769,21 @@ static void sdhci_remove_slot(struct pci_dev *pdev, int slot) tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - iounmap(host->ioaddr); - - pci_release_region(pdev, host->bar); + kfree(host->adma_desc); + kfree(host->align_buffer); - mmc_free_host(mmc); + host->adma_desc = NULL; + host->align_buffer = NULL; } -static int __devinit sdhci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int ret, i; - u8 slots, rev; - struct sdhci_chip *chip; - - BUG_ON(pdev == NULL); - BUG_ON(ent == NULL); +EXPORT_SYMBOL_GPL(sdhci_remove_host); - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); - - printk(KERN_INFO DRIVER_NAME - ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n", - pci_name(pdev), (int)pdev->vendor, (int)pdev->device, - (int)rev); - - ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); - if (ret) - return ret; - - slots = PCI_SLOT_INFO_SLOTS(slots) + 1; - DBG("found %d slot(s)\n", slots); - if (slots == 0) - return -ENODEV; - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - chip = kzalloc(sizeof(struct sdhci_chip) + - sizeof(struct sdhci_host*) * slots, GFP_KERNEL); - if (!chip) { - ret = -ENOMEM; - goto err; - } - - chip->pdev = pdev; - chip->quirks = ent->driver_data; - - if (debug_quirks) - chip->quirks = debug_quirks; - - chip->num_slots = slots; - pci_set_drvdata(pdev, chip); - - for (i = 0;i < slots;i++) { - ret = sdhci_probe_slot(pdev, i); - if (ret) { - for (i--;i >= 0;i--) - sdhci_remove_slot(pdev, i); - goto free; - } - } - - return 0; - -free: - pci_set_drvdata(pdev, NULL); - kfree(chip); - -err: - pci_disable_device(pdev); - return ret; -} - -static void __devexit sdhci_remove(struct pci_dev *pdev) +void sdhci_free_host(struct sdhci_host *host) { - int i; - struct sdhci_chip *chip; - - chip = pci_get_drvdata(pdev); - - if (chip) { - for (i = 0;i < chip->num_slots;i++) - sdhci_remove_slot(pdev, i); - - pci_set_drvdata(pdev, NULL); - - kfree(chip); - } - - pci_disable_device(pdev); + mmc_free_host(host->mmc); } -static struct pci_driver sdhci_driver = { - .name = DRIVER_NAME, - .id_table = pci_ids, - .probe = sdhci_probe, - .remove = __devexit_p(sdhci_remove), - .suspend = sdhci_suspend, - .resume = sdhci_resume, -}; +EXPORT_SYMBOL_GPL(sdhci_free_host); /*****************************************************************************\ * * @@ -1726,14 +1797,11 @@ static int __init sdhci_drv_init(void) ": Secure Digital Host Controller Interface driver\n"); printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); - return pci_register_driver(&sdhci_driver); + return 0; } static void __exit sdhci_drv_exit(void) { - DBG("Exiting\n"); - - pci_unregister_driver(&sdhci_driver); } module_init(sdhci_drv_init); @@ -1742,7 +1810,7 @@ module_exit(sdhci_drv_exit); module_param(debug_quirks, uint, 0444); MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); -MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver"); +MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); MODULE_LICENSE("GPL"); MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 299118de8933..5bb355281765 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -10,18 +10,6 @@ */ /* - * PCI registers - */ - -#define PCI_SDHCI_IFPIO 0x00 -#define PCI_SDHCI_IFDMA 0x01 -#define PCI_SDHCI_IFVENDOR 0x02 - -#define PCI_SLOT_INFO 0x40 /* 8 bits */ -#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) -#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 - -/* * Controller registers */ @@ -72,6 +60,11 @@ #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 #define SDHCI_CTRL_HISPD 0x04 +#define SDHCI_CTRL_DMA_MASK 0x18 +#define SDHCI_CTRL_SDMA 0x00 +#define SDHCI_CTRL_ADMA1 0x08 +#define SDHCI_CTRL_ADMA32 0x10 +#define SDHCI_CTRL_ADMA64 0x18 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -117,6 +110,7 @@ #define SDHCI_INT_DATA_END_BIT 0x00400000 #define SDHCI_INT_BUS_POWER 0x00800000 #define SDHCI_INT_ACMD12ERR 0x01000000 +#define SDHCI_INT_ADMA_ERROR 0x02000000 #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 @@ -140,11 +134,14 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_ADMA2 0x00080000 +#define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 #define SDHCI_CAN_DO_DMA 0x00400000 #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 #define SDHCI_CAN_VDD_180 0x04000000 +#define SDHCI_CAN_64BIT 0x10000000 /* 44-47 reserved for more caps */ @@ -152,7 +149,16 @@ /* 4C-4F reserved for more max current */ -/* 50-FB reserved */ +#define SDHCI_SET_ACMD12_ERROR 0x50 +#define SDHCI_SET_INT_ERROR 0x52 + +#define SDHCI_ADMA_ERROR 0x54 + +/* 55-57 reserved */ + +#define SDHCI_ADMA_ADDRESS 0x58 + +/* 60-FB reserved */ #define SDHCI_SLOT_INT_STATUS 0xFC @@ -161,11 +167,50 @@ #define SDHCI_VENDOR_VER_SHIFT 8 #define SDHCI_SPEC_VER_MASK 0x00FF #define SDHCI_SPEC_VER_SHIFT 0 +#define SDHCI_SPEC_100 0 +#define SDHCI_SPEC_200 1 -struct sdhci_chip; +struct sdhci_ops; struct sdhci_host { - struct sdhci_chip *chip; + /* Data set by hardware interface driver */ + const char *hw_name; /* Hardware bus name */ + + unsigned int quirks; /* Deviations from spec. */ + +/* Controller doesn't honor resets unless we touch the clock register */ +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ +#define SDHCI_QUIRK_FORCE_DMA (1<<1) +/* Controller doesn't like to be reset when there is no card inserted. */ +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ +#define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller has an unusable ADMA engine */ +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) +/* Controller can only ADMA chunks that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) +/* Controller provides an incorrect timeout value for transfers */ +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) + + int irq; /* Device IRQ */ + void __iomem * ioaddr; /* Mapped address */ + + const struct sdhci_ops *ops; /* Low level hw interface */ + + /* Internal data */ struct mmc_host *mmc; /* MMC structure */ #ifdef CONFIG_LEDS_CLASS @@ -176,7 +221,11 @@ struct sdhci_host { int flags; /* Host attributes */ #define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ -#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ + + unsigned int version; /* SDHCI spec. version */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ @@ -194,22 +243,41 @@ struct sdhci_host { int offset; /* Offset into current sg */ int remain; /* Bytes left in current */ - int irq; /* Device IRQ */ - int bar; /* PCI BAR index */ - unsigned long addr; /* Bus address */ - void __iomem * ioaddr; /* Mapped address */ + int sg_count; /* Mapped sg entries */ + + u8 *adma_desc; /* ADMA descriptor table */ + u8 *align_buffer; /* Bounce buffer */ + + dma_addr_t adma_addr; /* Mapped ADMA descr. table */ + dma_addr_t align_addr; /* Mapped bounce buffer */ struct tasklet_struct card_tasklet; /* Tasklet structures */ struct tasklet_struct finish_tasklet; struct timer_list timer; /* Timer for timeouts */ -}; -struct sdhci_chip { - struct pci_dev *pdev; + unsigned long private[0] ____cacheline_aligned; +}; - unsigned long quirks; - int num_slots; /* Slots on controller */ - struct sdhci_host *hosts[0]; /* Pointers to hosts */ +struct sdhci_ops { + int (*enable_dma)(struct sdhci_host *host); }; + + +extern struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size); +extern void sdhci_free_host(struct sdhci_host *host); + +static inline void *sdhci_priv(struct sdhci_host *host) +{ + return (void *)host->private; +} + +extern int sdhci_add_host(struct sdhci_host *host); +extern void sdhci_remove_host(struct sdhci_host *host, int dead); + +#ifdef CONFIG_PM +extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); +extern int sdhci_resume_host(struct sdhci_host *host); +#endif diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c new file mode 100644 index 000000000000..f99e9f721629 --- /dev/null +++ b/drivers/mmc/host/sdricoh_cs.c @@ -0,0 +1,575 @@ +/* + * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be + * found on some Ricoh RL5c476 II cardbus bridge + * + * Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* +#define DEBUG +#define VERBOSE_DEBUG +*/ +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/scatterlist.h> +#include <linux/version.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> +#include <linux/io.h> + +#include <linux/mmc/host.h> + +#define DRIVER_NAME "sdricoh_cs" + +static unsigned int switchlocked; + +/* i/o region */ +#define SDRICOH_PCI_REGION 0 +#define SDRICOH_PCI_REGION_SIZE 0x1000 + +/* registers */ +#define R104_VERSION 0x104 +#define R200_CMD 0x200 +#define R204_CMD_ARG 0x204 +#define R208_DATAIO 0x208 +#define R20C_RESP 0x20c +#define R21C_STATUS 0x21c +#define R2E0_INIT 0x2e0 +#define R2E4_STATUS_RESP 0x2e4 +#define R2F0_RESET 0x2f0 +#define R224_MODE 0x224 +#define R226_BLOCKSIZE 0x226 +#define R228_POWER 0x228 +#define R230_DATA 0x230 + +/* flags for the R21C_STATUS register */ +#define STATUS_CMD_FINISHED 0x00000001 +#define STATUS_TRANSFER_FINISHED 0x00000004 +#define STATUS_CARD_INSERTED 0x00000020 +#define STATUS_CARD_LOCKED 0x00000080 +#define STATUS_CMD_TIMEOUT 0x00400000 +#define STATUS_READY_TO_READ 0x01000000 +#define STATUS_READY_TO_WRITE 0x02000000 +#define STATUS_BUSY 0x40000000 + +/* timeouts */ +#define INIT_TIMEOUT 100 +#define CMD_TIMEOUT 100000 +#define TRANSFER_TIMEOUT 100000 +#define BUSY_TIMEOUT 32767 + +/* list of supported pcmcia devices */ +static struct pcmcia_device_id pcmcia_ids[] = { + /* vendor and device strings followed by their crc32 hashes */ + PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, + 0xc3901202), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids); + +/* mmc privdata */ +struct sdricoh_host { + struct device *dev; + struct mmc_host *mmc; /* MMC structure */ + unsigned char __iomem *iobase; + struct pci_dev *pci_dev; + int app_cmd; +}; + +/***************** register i/o helper functions *****************************/ + +static inline unsigned int sdricoh_readl(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readl(host->iobase + reg); + dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value); + return value; +} + +static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg, + unsigned int value) +{ + writel(value, host->iobase + reg); + dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value); + +} + +static inline unsigned int sdricoh_readw(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readw(host->iobase + reg); + dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); + return value; +} + +static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg, + unsigned short value) +{ + writew(value, host->iobase + reg); + dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value); +} + +static inline unsigned int sdricoh_readb(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readb(host->iobase + reg); + dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); + return value; +} + +static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted, + unsigned int timeout){ + unsigned int loop; + unsigned int status = 0; + struct device *dev = host->dev; + for (loop = 0; loop < timeout; loop++) { + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + if (status & wanted) + break; + } + + if (loop == timeout) { + dev_err(dev, "query_status: timeout waiting for %x\n", wanted); + return -ETIMEDOUT; + } + + /* do not do this check in the loop as some commands fail otherwise */ + if (status & 0x7F0000) { + dev_err(dev, "waiting for status bit %x failed\n", wanted); + return -EINVAL; + } + return 0; + +} + +static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode, + unsigned int arg) +{ + unsigned int status; + int result = 0; + unsigned int loop = 0; + /* reset status reg? */ + sdricoh_writel(host, R21C_STATUS, 0x18); + /* fill parameters */ + sdricoh_writel(host, R204_CMD_ARG, arg); + sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode); + /* wait for command completion */ + if (opcode) { + for (loop = 0; loop < CMD_TIMEOUT; loop++) { + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + if (status & STATUS_CMD_FINISHED) + break; + } + /* don't check for timeout in the loop it is not always + reset correctly + */ + if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT) + result = -ETIMEDOUT; + + } + + return result; + +} + +static int sdricoh_reset(struct sdricoh_host *host) +{ + dev_dbg(host->dev, "reset\n"); + sdricoh_writel(host, R2F0_RESET, 0x10001); + sdricoh_writel(host, R2E0_INIT, 0x10000); + if (sdricoh_readl(host, R2E0_INIT) != 0x10000) + return -EIO; + sdricoh_writel(host, R2E0_INIT, 0x10007); + + sdricoh_writel(host, R224_MODE, 0x2000000); + sdricoh_writel(host, R228_POWER, 0xe0); + + + /* status register ? */ + sdricoh_writel(host, R21C_STATUS, 0x18); + + return 0; +} + +static int sdricoh_blockio(struct sdricoh_host *host, int read, + u8 *buf, int len) +{ + int size; + u32 data = 0; + /* wait until the data is available */ + if (read) { + if (sdricoh_query_status(host, STATUS_READY_TO_READ, + TRANSFER_TIMEOUT)) + return -ETIMEDOUT; + sdricoh_writel(host, R21C_STATUS, 0x18); + /* read data */ + while (len) { + data = sdricoh_readl(host, R230_DATA); + size = min(len, 4); + len -= size; + while (size) { + *buf = data & 0xFF; + buf++; + data >>= 8; + size--; + } + } + } else { + if (sdricoh_query_status(host, STATUS_READY_TO_WRITE, + TRANSFER_TIMEOUT)) + return -ETIMEDOUT; + sdricoh_writel(host, R21C_STATUS, 0x18); + /* write data */ + while (len) { + size = min(len, 4); + len -= size; + while (size) { + data >>= 8; + data |= (u32)*buf << 24; + buf++; + size--; + } + sdricoh_writel(host, R230_DATA, data); + } + } + + if (len) + return -EIO; + + return 0; +} + +static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdricoh_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = cmd->data; + struct device *dev = host->dev; + unsigned char opcode = cmd->opcode; + int i; + + dev_dbg(dev, "=============================\n"); + dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode); + + sdricoh_writel(host, R21C_STATUS, 0x18); + + /* MMC_APP_CMDs need some special handling */ + if (host->app_cmd) { + opcode |= 64; + host->app_cmd = 0; + } else if (opcode == 55) + host->app_cmd = 1; + + /* read/write commands seem to require this */ + if (data) { + sdricoh_writew(host, R226_BLOCKSIZE, data->blksz); + sdricoh_writel(host, R208_DATAIO, 0); + } + + cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg); + + /* read response buffer */ + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0; i < 4; i++) { + cmd->resp[i] = + sdricoh_readl(host, + R20C_RESP + (3 - i) * 4) << 8; + if (i != 3) + cmd->resp[i] |= + sdricoh_readb(host, R20C_RESP + + (3 - i) * 4 - 1); + } + } else + cmd->resp[0] = sdricoh_readl(host, R20C_RESP); + } + + /* transfer data */ + if (data && cmd->error == 0) { + dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i " + "sg length %i\n", data->blksz, data->blocks, + data->sg_len, data->sg->length); + + /* enter data reading mode */ + sdricoh_writel(host, R21C_STATUS, 0x837f031e); + for (i = 0; i < data->blocks; i++) { + size_t len = data->blksz; + u8 *buf; + struct page *page; + int result; + page = sg_page(data->sg); + + buf = kmap(page) + data->sg->offset + (len * i); + result = + sdricoh_blockio(host, + data->flags & MMC_DATA_READ, buf, len); + kunmap(page); + flush_dcache_page(page); + if (result) { + dev_err(dev, "sdricoh_request: cmd %i " + "block transfer failed\n", cmd->opcode); + cmd->error = result; + break; + } else + data->bytes_xfered += len; + } + + sdricoh_writel(host, R208_DATAIO, 1); + + if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED, + TRANSFER_TIMEOUT)) { + dev_err(dev, "sdricoh_request: transfer end error\n"); + cmd->error = -EINVAL; + } + } + /* FIXME check busy flag */ + + mmc_request_done(mmc, mrq); + dev_dbg(dev, "=============================\n"); +} + +static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdricoh_host *host = mmc_priv(mmc); + dev_dbg(host->dev, "set_ios\n"); + + if (ios->power_mode == MMC_POWER_ON) { + sdricoh_writel(host, R228_POWER, 0xc0e0); + + if (ios->bus_width == MMC_BUS_WIDTH_4) { + sdricoh_writel(host, R224_MODE, 0x2000300); + sdricoh_writel(host, R228_POWER, 0x40e0); + } else { + sdricoh_writel(host, R224_MODE, 0x2000340); + } + + } else if (ios->power_mode == MMC_POWER_UP) { + sdricoh_writel(host, R224_MODE, 0x2000320); + sdricoh_writel(host, R228_POWER, 0xe0); + } +} + +static int sdricoh_get_ro(struct mmc_host *mmc) +{ + struct sdricoh_host *host = mmc_priv(mmc); + unsigned int status; + + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + + /* some notebooks seem to have the locked flag switched */ + if (switchlocked) + return !(status & STATUS_CARD_LOCKED); + + return (status & STATUS_CARD_LOCKED); +} + +static struct mmc_host_ops sdricoh_ops = { + .request = sdricoh_request, + .set_ios = sdricoh_set_ios, + .get_ro = sdricoh_get_ro, +}; + +/* initialize the control and register it to the mmc framework */ +static int sdricoh_init_mmc(struct pci_dev *pci_dev, + struct pcmcia_device *pcmcia_dev) +{ + int result = 0; + void __iomem *iobase = NULL; + struct mmc_host *mmc = NULL; + struct sdricoh_host *host = NULL; + struct device *dev = &pcmcia_dev->dev; + /* map iomem */ + if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) != + SDRICOH_PCI_REGION_SIZE) { + dev_dbg(dev, "unexpected pci resource len\n"); + return -ENODEV; + } + iobase = + pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE); + if (!iobase) { + dev_err(dev, "unable to map iobase\n"); + return -ENODEV; + } + /* check version? */ + if (readl(iobase + R104_VERSION) != 0x4000) { + dev_dbg(dev, "no supported mmc controller found\n"); + result = -ENODEV; + goto err; + } + /* allocate privdata */ + mmc = pcmcia_dev->priv = + mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev); + if (!mmc) { + dev_err(dev, "mmc_alloc_host failed\n"); + result = -ENOMEM; + goto err; + } + host = mmc_priv(mmc); + + host->iobase = iobase; + host->dev = dev; + host->pci_dev = pci_dev; + + mmc->ops = &sdricoh_ops; + + /* FIXME: frequency and voltage handling is done by the controller + */ + mmc->f_min = 450000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps |= MMC_CAP_4_BIT_DATA; + + mmc->max_seg_size = 1024 * 512; + mmc->max_blk_size = 512; + + /* reset the controler */ + if (sdricoh_reset(host)) { + dev_dbg(dev, "could not reset\n"); + result = -EIO; + goto err; + + } + + result = mmc_add_host(mmc); + + if (!result) { + dev_dbg(dev, "mmc host registered\n"); + return 0; + } + +err: + if (iobase) + iounmap(iobase); + if (mmc) + mmc_free_host(mmc); + + return result; +} + +/* search for supported mmc controllers */ +static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) +{ + struct pci_dev *pci_dev = NULL; + + dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" + " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); + + /* search pci cardbus bridge that contains the mmc controler */ + /* the io region is already claimed by yenta_socket... */ + while ((pci_dev = + pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, + pci_dev))) { + /* try to init the device */ + if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) { + dev_info(&pcmcia_dev->dev, "MMC controller found\n"); + return 0; + } + + } + dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n"); + return -ENODEV; +} + +static void sdricoh_pcmcia_detach(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + + dev_dbg(&link->dev, "detach\n"); + + /* remove mmc host */ + if (mmc) { + struct sdricoh_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + pci_iounmap(host->pci_dev, host->iobase); + pci_dev_put(host->pci_dev); + mmc_free_host(mmc); + } + pcmcia_disable_device(link); + +} + +#ifdef CONFIG_PM +static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + dev_dbg(&link->dev, "suspend\n"); + mmc_suspend_host(mmc, PMSG_SUSPEND); + return 0; +} + +static int sdricoh_pcmcia_resume(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + dev_dbg(&link->dev, "resume\n"); + sdricoh_reset(mmc_priv(mmc)); + mmc_resume_host(mmc); + return 0; +} +#else +#define sdricoh_pcmcia_suspend NULL +#define sdricoh_pcmcia_resume NULL +#endif + +static struct pcmcia_driver sdricoh_driver = { + .drv = { + .name = DRIVER_NAME, + }, + .probe = sdricoh_pcmcia_probe, + .remove = sdricoh_pcmcia_detach, + .id_table = pcmcia_ids, + .suspend = sdricoh_pcmcia_suspend, + .resume = sdricoh_pcmcia_resume, +}; + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdricoh_drv_init(void) +{ + return pcmcia_register_driver(&sdricoh_driver); +} + +static void __exit sdricoh_drv_exit(void) +{ + pcmcia_unregister_driver(&sdricoh_driver); +} + +module_init(sdricoh_drv_init); +module_exit(sdricoh_drv_exit); + +module_param(switchlocked, uint, 0444); + +MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>"); +MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM_DESC(switchlocked, "Switch the cards locked status." + "Use this when unlocked cards are shown readonly (default 0)"); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 1c14a186f000..13844843e8de 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -973,7 +973,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) mmc->ops = &tifm_sd_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = 20000000 / 60; mmc->f_max = 24000000; diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index c303e7f57ab4..adda37952032 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -68,16 +68,16 @@ static const int unlock_codes[] = { 0x83, 0x87 }; static const int valid_ids[] = { 0x7112, - }; +}; #ifdef CONFIG_PNP -static unsigned int nopnp = 0; +static unsigned int param_nopnp = 0; #else -static const unsigned int nopnp = 1; +static const unsigned int param_nopnp = 1; #endif -static unsigned int io = 0x248; -static unsigned int irq = 6; -static int dma = 2; +static unsigned int param_io = 0x248; +static unsigned int param_irq = 6; +static int param_dma = 2; /* * Basic functions @@ -939,7 +939,7 @@ static int wbsd_get_ro(struct mmc_host *mmc) spin_unlock_bh(&host->lock); - return csr & WBSD_WRPT; + return !!(csr & WBSD_WRPT); } static const struct mmc_host_ops wbsd_ops = { @@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev) mmc->f_min = 375000; mmc->f_max = 24000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; spin_lock_init(&host->lock); @@ -1420,7 +1420,7 @@ kfree: dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); - host->dma_addr = (dma_addr_t)NULL; + host->dma_addr = 0; kfree(host->dma_buffer); host->dma_buffer = NULL; @@ -1445,7 +1445,7 @@ static void wbsd_release_dma(struct wbsd_host *host) host->dma = -1; host->dma_buffer = NULL; - host->dma_addr = (dma_addr_t)NULL; + host->dma_addr = 0; } /* @@ -1765,7 +1765,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp) static int __devinit wbsd_probe(struct platform_device *dev) { /* Use the module parameters for resources */ - return wbsd_init(&dev->dev, io, irq, dma, 0); + return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0); } static int __devexit wbsd_remove(struct platform_device *dev) @@ -1979,14 +1979,14 @@ static int __init wbsd_drv_init(void) #ifdef CONFIG_PNP - if (!nopnp) { + if (!param_nopnp) { result = pnp_register_driver(&wbsd_pnp_driver); if (result < 0) return result; } #endif /* CONFIG_PNP */ - if (nopnp) { + if (param_nopnp) { result = platform_driver_register(&wbsd_driver); if (result < 0) return result; @@ -2012,12 +2012,12 @@ static void __exit wbsd_drv_exit(void) { #ifdef CONFIG_PNP - if (!nopnp) + if (!param_nopnp) pnp_unregister_driver(&wbsd_pnp_driver); #endif /* CONFIG_PNP */ - if (nopnp) { + if (param_nopnp) { platform_device_unregister(wbsd_device); platform_driver_unregister(&wbsd_driver); @@ -2029,11 +2029,11 @@ static void __exit wbsd_drv_exit(void) module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); #ifdef CONFIG_PNP -module_param(nopnp, uint, 0444); +module_param_named(nopnp, param_nopnp, uint, 0444); #endif -module_param(io, uint, 0444); -module_param(irq, uint, 0444); -module_param(dma, int, 0444); +module_param_named(io, param_io, uint, 0444); +module_param_named(irq, param_irq, uint, 0444); +module_param_named(dma, param_dma, int, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); |