diff options
Diffstat (limited to 'drivers/media/pci/zoran/zr36060.c')
| -rw-r--r-- | drivers/media/pci/zoran/zr36060.c | 1006 |
1 files changed, 0 insertions, 1006 deletions
diff --git a/drivers/media/pci/zoran/zr36060.c b/drivers/media/pci/zoran/zr36060.c deleted file mode 100644 index 2c2e8130fc96..000000000000 --- a/drivers/media/pci/zoran/zr36060.c +++ /dev/null @@ -1,1006 +0,0 @@ -/* - * Zoran ZR36060 basic configuration functions - * - * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be> - * - * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * ------------------------------------------------------------------------ - */ - -#define ZR060_VERSION "v0.7" - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <linux/types.h> -#include <linux/wait.h> - -/* I/O commands, error codes */ -#include <asm/io.h> - -/* headerfile of this module */ -#include "zr36060.h" - -/* codec io API */ -#include "videocodec.h" - -/* it doesn't make sense to have more than 20 or so, - just to prevent some unwanted loops */ -#define MAX_CODECS 20 - -/* amount of chips attached via this driver */ -static int zr36060_codecs; - -static bool low_bitrate; -module_param(low_bitrate, bool, 0); -MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); - -/* debugging is available via module parameter */ -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-4)"); - -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - -/* ========================================================================= - Local hardware I/O functions: - - read/write via codec layer (registers are located in the master device) - ========================================================================= */ - -/* read and write functions */ -static u8 -zr36060_read (struct zr36060 *ptr, - u16 reg) -{ - u8 value = 0; - - // just in case something is wrong... - if (ptr->codec->master_data->readreg) - value = (ptr->codec->master_data->readreg(ptr->codec, - reg)) & 0xff; - else - dprintk(1, - KERN_ERR "%s: invalid I/O setup, nothing read!\n", - ptr->name); - - //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value); - - return value; -} - -static void -zr36060_write(struct zr36060 *ptr, - u16 reg, - u8 value) -{ - //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg); - dprintk(4, "0x%02x @0x%04x\n", value, reg); - - // just in case something is wrong... - if (ptr->codec->master_data->writereg) - ptr->codec->master_data->writereg(ptr->codec, reg, value); - else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing written!\n", - ptr->name); -} - -/* ========================================================================= - Local helper function: - - status read - ========================================================================= */ - -/* status is kept in datastructure */ -static u8 -zr36060_read_status (struct zr36060 *ptr) -{ - ptr->status = zr36060_read(ptr, ZR060_CFSR); - - zr36060_read(ptr, 0); - return ptr->status; -} - -/* ========================================================================= - Local helper function: - - scale factor read - ========================================================================= */ - -/* scale factor is kept in datastructure */ -static u16 -zr36060_read_scalefactor (struct zr36060 *ptr) -{ - ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) | - (zr36060_read(ptr, ZR060_SF_LO) & 0xFF); - - /* leave 0 selected for an eventually GO from master */ - zr36060_read(ptr, 0); - return ptr->scalefact; -} - -/* ========================================================================= - Local helper function: - - wait if codec is ready to proceed (end of processing) or time is over - ========================================================================= */ - -static void -zr36060_wait_end (struct zr36060 *ptr) -{ - int i = 0; - - while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { - udelay(1); - if (i++ > 200000) { // 200ms, there is for sure something wrong!!! - dprintk(1, - "%s: timeout at wait_end (last status: 0x%02x)\n", - ptr->name, ptr->status); - break; - } - } -} - -/* ========================================================================= - Local helper function: - - basic test of "connectivity", writes/reads to/from memory the SOF marker - ========================================================================= */ - -static int -zr36060_basic_test (struct zr36060 *ptr) -{ - if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) && - (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to jpeg processor!\n", - ptr->name); - return -ENXIO; - } - - zr36060_wait_end(ptr); - if (ptr->status & ZR060_CFSR_Busy) { - dprintk(1, - KERN_ERR - "%s: attach failed, jpeg processor failed (end flag)!\n", - ptr->name); - return -EBUSY; - } - - return 0; /* looks good! */ -} - -/* ========================================================================= - Local helper function: - - simple loop for pushing the init datasets - ========================================================================= */ - -static int -zr36060_pushit (struct zr36060 *ptr, - u16 startreg, - u16 len, - const char *data) -{ - int i = 0; - - dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, - startreg, len); - while (i < len) { - zr36060_write(ptr, startreg++, data[i++]); - } - - return i; -} - -/* ========================================================================= - Basic datasets: - - jpeg baseline setup data (you find it on lots places in internet, or just - extract it from any regular .jpg image...) - - Could be variable, but until it's not needed it they are just fixed to save - memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initialize from there, as e.g. the linux zr36057/60 driver does it. - ========================================================================= */ - -static const char zr36060_dqt[0x86] = { - 0xff, 0xdb, //Marker: DQT - 0x00, 0x84, //Length: 2*65+2 - 0x00, //Pq,Tq first table - 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, - 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, - 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, - 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, - 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, - 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, - 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, - 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, - 0x01, //Pq,Tq second table - 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, - 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 -}; - -static const char zr36060_dht[0x1a4] = { - 0xff, 0xc4, //Marker: DHT - 0x01, 0xa2, //Length: 2*AC, 2*DC - 0x00, //DC first table - 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x01, //DC second table - 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x10, //AC first table - 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, - 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, - 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, - 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, - 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, - 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, - 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, - 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, - 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, - 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, - 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, - 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, - 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, - 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, - 0xF8, 0xF9, 0xFA, - 0x11, //AC second table - 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, - 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, - 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, - 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, - 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, - 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, - 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, - 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, - 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, - 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, - 0xF9, 0xFA -}; - -/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ -#define NO_OF_COMPONENTS 0x3 //Y,U,V -#define BASELINE_PRECISION 0x8 //MCU size (?) -static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT -static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC -static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC - -/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ -static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; -static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; - -/* ========================================================================= - Local helper functions: - - calculation and setup of parameter-dependent JPEG baseline segments - (needed for compression only) - ========================================================================= */ - -/* ------------------------------------------------------------------------- */ - -/* SOF (start of frame) segment depends on width, height and sampling ratio - of each color component */ - -static int -zr36060_set_sof (struct zr36060 *ptr) -{ - char sof_data[34]; // max. size of register set - int i; - - dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, - ptr->width, ptr->height, NO_OF_COMPONENTS); - sof_data[0] = 0xff; - sof_data[1] = 0xc0; - sof_data[2] = 0x00; - sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; - sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060 - sof_data[5] = (ptr->height) >> 8; - sof_data[6] = (ptr->height) & 0xff; - sof_data[7] = (ptr->width) >> 8; - sof_data[8] = (ptr->width) & 0xff; - sof_data[9] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sof_data[10 + (i * 3)] = i; // index identifier - sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | - (ptr->v_samp_ratio[i]); // sampling ratios - sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection - } - return zr36060_pushit(ptr, ZR060_SOF_IDX, - (3 * NO_OF_COMPONENTS) + 10, sof_data); -} - -/* ------------------------------------------------------------------------- */ - -/* SOS (start of scan) segment depends on the used scan components - of each color component */ - -static int -zr36060_set_sos (struct zr36060 *ptr) -{ - char sos_data[16]; // max. size of register set - int i; - - dprintk(3, "%s: write SOS\n", ptr->name); - sos_data[0] = 0xff; - sos_data[1] = 0xda; - sos_data[2] = 0x00; - sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; - sos_data[4] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sos_data[5 + (i * 2)] = i; // index - sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | - zr36060_ta[i]; // AC/DC tbl.sel. - } - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; - return zr36060_pushit(ptr, ZR060_SOS_IDX, - 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, - sos_data); -} - -/* ------------------------------------------------------------------------- */ - -/* DRI (define restart interval) */ - -static int -zr36060_set_dri (struct zr36060 *ptr) -{ - char dri_data[6]; // max. size of register set - - dprintk(3, "%s: write DRI\n", ptr->name); - dri_data[0] = 0xff; - dri_data[1] = 0xdd; - dri_data[2] = 0x00; - dri_data[3] = 0x04; - dri_data[4] = (ptr->dri) >> 8; - dri_data[5] = (ptr->dri) & 0xff; - return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data); -} - -/* ========================================================================= - Setup function: - - Setup compression/decompression of Zoran's JPEG processor - ( see also zoran 36060 manual ) - - ... sorry for the spaghetti code ... - ========================================================================= */ -static void -zr36060_init (struct zr36060 *ptr) -{ - int sum = 0; - long bitcnt, tmp; - - if (ptr->mode == CODEC_DO_COMPRESSION) { - dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* 060 communicates with 067 in master mode */ - zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); - - /* Compression with or without variable scale factor */ - /*FIXME: What about ptr->bitrate_ctrl? */ - zr36060_write(ptr, ZR060_CMR, - ZR060_CMR_Comp | ZR060_CMR_Pass2 | - ZR060_CMR_BRB); - - /* Must be zero */ - zr36060_write(ptr, ZR060_MBZ, 0x00); - zr36060_write(ptr, ZR060_TCR_HI, 0x00); - zr36060_write(ptr, ZR060_TCR_LO, 0x00); - - /* Disable all IRQs - no DataErr means autoreset */ - zr36060_write(ptr, ZR060_IMR, 0); - - /* volume control settings */ - zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8); - zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff); - - zr36060_write(ptr, ZR060_AF_HI, 0xff); - zr36060_write(ptr, ZR060_AF_M, 0xff); - zr36060_write(ptr, ZR060_AF_LO, 0xff); - - /* setup the variable jpeg tables */ - sum += zr36060_set_sof(ptr); - sum += zr36060_set_sos(ptr); - sum += zr36060_set_dri(ptr); - - /* setup the fixed jpeg tables - maybe variable, though - - * (see table init section above) */ - sum += - zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), - zr36060_dqt); - sum += - zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), - zr36060_dht); - zr36060_write(ptr, ZR060_APP_IDX, 0xff); - zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn); - zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00); - zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2); - sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, - ptr->app.data) + 4; - zr36060_write(ptr, ZR060_COM_IDX, 0xff); - zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe); - zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00); - zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2); - sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, - ptr->com.data) + 4; - - /* setup misc. data for compression (target code sizes) */ - - /* size of compressed code to reach without header data */ - sum = ptr->real_code_vol - sum; - bitcnt = sum << 3; /* need the size in bits */ - - tmp = bitcnt >> 16; - dprintk(3, - "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", - ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); - zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff); - - bitcnt -= bitcnt >> 7; // bits without stuffing - bitcnt -= ((bitcnt * 5) >> 6); // bits without eob - - tmp = bitcnt >> 16; - dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", - ptr->name, bitcnt, tmp); - zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff); - - /* JPEG markers to be included in the compressed stream */ - zr36060_write(ptr, ZR060_MER, - ZR060_MER_DQT | ZR060_MER_DHT | - ((ptr->com.len > 0) ? ZR060_MER_Com : 0) | - ((ptr->app.len > 0) ? ZR060_MER_App : 0)); - - /* Setup the Video Frontend */ - /* Limit pixel range to 16..235 as per CCIR-601 */ - zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); - - } else { - dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* 060 communicates with 067 in master mode */ - zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); - - /* Decompression */ - zr36060_write(ptr, ZR060_CMR, 0); - - /* Must be zero */ - zr36060_write(ptr, ZR060_MBZ, 0x00); - zr36060_write(ptr, ZR060_TCR_HI, 0x00); - zr36060_write(ptr, ZR060_TCR_LO, 0x00); - - /* Disable all IRQs - no DataErr means autoreset */ - zr36060_write(ptr, ZR060_IMR, 0); - - /* setup misc. data for expansion */ - zr36060_write(ptr, ZR060_MER, 0); - - /* setup the fixed jpeg tables - maybe variable, though - - * (see table init section above) */ - zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), - zr36060_dht); - - /* Setup the Video Frontend */ - //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt); - //this doesn't seem right and doesn't work... - zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); - } - - /* Load the tables */ - zr36060_write(ptr, ZR060_LOAD, - ZR060_LOAD_SyncRst | ZR060_LOAD_Load); - zr36060_wait_end(ptr); - dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name, - ptr->status); - - if (ptr->status & ZR060_CFSR_Busy) { - dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name); - return; // something is wrong, its timed out!!!! - } -} - -/* ========================================================================= - CODEC API FUNCTIONS - - this functions are accessed by the master via the API structure - ========================================================================= */ - -/* set compression/expansion mode and launches codec - - this should be the last call from the master before starting processing */ -static int -zr36060_set_mode (struct videocodec *codec, - int mode) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - - dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); - - if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) - return -EINVAL; - - ptr->mode = mode; - zr36060_init(ptr); - - return 0; -} - -/* set picture size (norm is ignored as the codec doesn't know about it) */ -static int -zr36060_set_video (struct videocodec *codec, - struct tvnorm *norm, - struct vfe_settings *cap, - struct vfe_polarity *pol) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - u32 reg; - int size; - - dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name, - cap->x, cap->y, cap->width, cap->height, cap->decimation); - - /* if () return -EINVAL; - * trust the master driver that it knows what it does - so - * we allow invalid startx/y and norm for now ... */ - ptr->width = cap->width / (cap->decimation & 0xff); - ptr->height = cap->height / (cap->decimation >> 8); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* Note that VSPol/HSPol bits in zr36060 have the opposite - * meaning of their zr360x7 counterparts with the same names - * N.b. for VSPol this is only true if FIVEdge = 0 (default, - * left unchanged here - in accordance with datasheet). - */ - reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0) - | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0) - | (pol->field_pol ? ZR060_VPR_FIPol : 0) - | (pol->blank_pol ? ZR060_VPR_BLPol : 0) - | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0) - | (pol->poe_pol ? ZR060_VPR_PoePol : 0) - | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0) - | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0); - zr36060_write(ptr, ZR060_VPR, reg); - - reg = 0; - switch (cap->decimation & 0xff) { - default: - case 1: - break; - - case 2: - reg |= ZR060_SR_HScale2; - break; - - case 4: - reg |= ZR060_SR_HScale4; - break; - } - - switch (cap->decimation >> 8) { - default: - case 1: - break; - - case 2: - reg |= ZR060_SR_VScale; - break; - } - zr36060_write(ptr, ZR060_SR, reg); - - zr36060_write(ptr, ZR060_BCR_Y, 0x00); - zr36060_write(ptr, ZR060_BCR_U, 0x80); - zr36060_write(ptr, ZR060_BCR_V, 0x80); - - /* sync generator */ - - reg = norm->Ht - 1; /* Vtotal */ - zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff); - - reg = norm->Wt - 1; /* Htotal */ - zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff); - - reg = 6 - 1; /* VsyncSize */ - zr36060_write(ptr, ZR060_SGR_VSYNC, reg); - - //reg = 30 - 1; /* HsyncSize */ -///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68); - reg = 68; - zr36060_write(ptr, ZR060_SGR_HSYNC, reg); - - reg = norm->VStart - 1; /* BVstart */ - zr36060_write(ptr, ZR060_SGR_BVSTART, reg); - - reg += norm->Ha / 2; /* BVend */ - zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff); - - reg = norm->HStart - 1; /* BHstart */ - zr36060_write(ptr, ZR060_SGR_BHSTART, reg); - - reg += norm->Wa; /* BHend */ - zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff); - - /* active area */ - reg = cap->y + norm->VStart; /* Vstart */ - zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff); - - reg += cap->height; /* Vend */ - zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff); - - reg = cap->x + norm->HStart; /* Hstart */ - zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff); - - reg += cap->width; /* Hend */ - zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff); - - /* subimage area */ - reg = norm->VStart - 4; /* SVstart */ - zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff); - - reg += norm->Ha / 2 + 8; /* SVend */ - zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff); - - reg = norm->HStart /*+ 64 */ - 4; /* SHstart */ - zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff); - - reg += norm->Wa + 8; /* SHend */ - zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff); - - size = ptr->width * ptr->height; - /* Target compressed field size in bits: */ - size = size * 16; /* uncompressed size in bits */ - /* (Ronald) by default, quality = 100 is a compression - * ratio 1:2. Setting low_bitrate (insmod option) sets - * it to 1:4 (instead of 1:2, zr36060 max) as limit because the - * buz can't handle more at decimation=1... Use low_bitrate if - * you have a Buz, unless you know what you're doing */ - size = size * cap->quality / (low_bitrate ? 400 : 200); - /* Lower limit (arbitrary, 1 KB) */ - if (size < 8192) - size = 8192; - /* Upper limit: 7/8 of the code buffers */ - if (size > ptr->total_code_vol * 7) - size = ptr->total_code_vol * 7; - - ptr->real_code_vol = size >> 3; /* in bytes */ - - /* the MBCVR is the *maximum* block volume, according to the - * JPEG ISO specs, this shouldn't be used, since that allows - * for the best encoding quality. So set it to it's max value */ - reg = ptr->max_block_vol; - zr36060_write(ptr, ZR060_MBCVR, reg); - - return 0; -} - -/* additional control functions */ -static int -zr36060_control (struct videocodec *codec, - int type, - int size, - void *data) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - int *ival = (int *) data; - - dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, - size); - - switch (type) { - case CODEC_G_STATUS: /* get last status */ - if (size != sizeof(int)) - return -EFAULT; - zr36060_read_status(ptr); - *ival = ptr->status; - break; - - case CODEC_G_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - *ival = CODEC_MODE_BJPG; - break; - - case CODEC_S_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - if (*ival != CODEC_MODE_BJPG) - return -EINVAL; - /* not needed, do nothing */ - return 0; - - case CODEC_G_VFE: - case CODEC_S_VFE: - /* not needed, do nothing */ - return 0; - - case CODEC_S_MMAP: - /* not available, give an error */ - return -ENXIO; - - case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - *ival = ptr->total_code_vol; - break; - - case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - ptr->total_code_vol = *ival; - ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; - break; - - case CODEC_G_JPEG_SCALE: /* get scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - *ival = zr36060_read_scalefactor(ptr); - break; - - case CODEC_S_JPEG_SCALE: /* set scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - ptr->scalefact = *ival; - break; - - case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - *app = ptr->app; - break; - } - - case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - ptr->app = *app; - break; - } - - case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - *com = ptr->com; - break; - } - - case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - ptr->com = *com; - break; - } - - default: - return -EINVAL; - } - - return size; -} - -/* ========================================================================= - Exit and unregister function: - - Deinitializes Zoran's JPEG processor - ========================================================================= */ - -static int -zr36060_unset (struct videocodec *codec) -{ - struct zr36060 *ptr = codec->data; - - if (ptr) { - /* do wee need some codec deinit here, too ???? */ - - dprintk(1, "%s: finished codec #%d\n", ptr->name, - ptr->num); - kfree(ptr); - codec->data = NULL; - - zr36060_codecs--; - return 0; - } - - return -EFAULT; -} - -/* ========================================================================= - Setup and registry function: - - Initializes Zoran's JPEG processor - - Also sets pixel size, average code size, mode (compr./decompr.) - (the given size is determined by the processor with the video interface) - ========================================================================= */ - -static int -zr36060_setup (struct videocodec *codec) -{ - struct zr36060 *ptr; - int res; - - dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n", - zr36060_codecs); - - if (zr36060_codecs == MAX_CODECS) { - dprintk(1, - KERN_ERR "zr36060: Can't attach more codecs!\n"); - return -ENOSPC; - } - //mem structure init - codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL); - if (NULL == ptr) { - dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n"); - return -ENOMEM; - } - - snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", - zr36060_codecs); - ptr->num = zr36060_codecs++; - ptr->codec = codec; - - //testing - res = zr36060_basic_test(ptr); - if (res < 0) { - zr36060_unset(codec); - return res; - } - //final setup - memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8); - memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8); - - ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag - * (what is the difference?) */ - ptr->mode = CODEC_DO_COMPRESSION; - ptr->width = 384; - ptr->height = 288; - ptr->total_code_vol = 16000; /* CHECKME */ - ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; - ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */ - ptr->scalefact = 0x100; - ptr->dri = 1; /* CHECKME, was 8 is 1 */ - - /* by default, no COM or APP markers - app should set those */ - ptr->com.len = 0; - ptr->app.appn = 0; - ptr->app.len = 0; - - zr36060_init(ptr); - - dprintk(1, KERN_INFO "%s: codec attached and running\n", - ptr->name); - - return 0; -} - -static const struct videocodec zr36060_codec = { - .owner = THIS_MODULE, - .name = "zr36060", - .magic = 0L, // magic not used - .flags = - CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | - CODEC_FLAG_DECODER | CODEC_FLAG_VFE, - .type = CODEC_TYPE_ZR36060, - .setup = zr36060_setup, // functionality - .unset = zr36060_unset, - .set_mode = zr36060_set_mode, - .set_video = zr36060_set_video, - .control = zr36060_control, - // others are not used -}; - -/* ========================================================================= - HOOK IN DRIVER AS KERNEL MODULE - ========================================================================= */ - -static int __init -zr36060_init_module (void) -{ - //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION); - zr36060_codecs = 0; - return videocodec_register(&zr36060_codec); -} - -static void __exit -zr36060_cleanup_module (void) -{ - if (zr36060_codecs) { - dprintk(1, - "zr36060: something's wrong - %d codecs left somehow.\n", - zr36060_codecs); - } - - /* however, we can't just stay alive */ - videocodec_unregister(&zr36060_codec); -} - -module_init(zr36060_init_module); -module_exit(zr36060_cleanup_module); - -MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@skynet.be>"); -MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors " - ZR060_VERSION); -MODULE_LICENSE("GPL"); |