summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig5
-rw-r--r--drivers/i2c/busses/i2c-cht-wc.c51
-rw-r--r--drivers/i2c/busses/i2c-imx.c4
-rw-r--r--drivers/i2c/busses/i2c-ismt.c5
-rw-r--r--drivers/i2c/busses/i2c-omap.c14
-rw-r--r--drivers/i2c/busses/i2c-piix4.c162
6 files changed, 221 insertions, 20 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a3f3ca29b3..009345d8f49d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -198,6 +198,11 @@ config I2C_CHT_WC
SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
found on some Intel Cherry Trail systems.
+ Note this controller is hooked up to a TI bq24292i charger-IC,
+ combined with a FUSB302 Type-C port-controller as such it is advised
+ to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
+ (the fusb302 driver currently is in drivers/staging).
+
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
depends on PCI
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 190bbbc7bfee..0d05dadb2dc5 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -16,6 +16,7 @@
* GNU General Public License for more details.
*/
+#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/i2c.h>
@@ -25,6 +26,7 @@
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/power/bq24190_charger.h>
#include <linux/slab.h>
#define CHT_WC_I2C_CTRL 0x5e24
@@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
.name = "cht_wc_ext_chrg_irq_chip",
};
+static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
+
static const struct property_entry bq24190_props[] = {
- PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
+ PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
PROPERTY_ENTRY_BOOL("omit-battery-class"),
PROPERTY_ENTRY_BOOL("disable-reset"),
{ }
};
+static struct regulator_consumer_supply fusb302_consumer = {
+ .supply = "vbus",
+ /* Must match fusb302 dev_name in intel_cht_int33fe.c */
+ .dev_name = "i2c-fusb302",
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+ .constraints = {
+ /* The name is used in intel_cht_int33fe.c do not change. */
+ .name = "cht_wc_usb_typec_vbus",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = &fusb302_consumer,
+ .num_consumer_supplies = 1,
+};
+
+static struct bq24190_platform_data bq24190_pdata = {
+ .regulator_init_data = &bq24190_vbus_init_data,
+};
+
static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
@@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
struct i2c_board_info board_info = {
.type = "bq24190",
.addr = 0x6b,
+ .dev_name = "bq24190",
.properties = bq24190_props,
+ .platform_data = &bq24190_pdata,
};
int ret, reg, irq;
@@ -314,11 +340,21 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
if (ret)
goto remove_irq_domain;
- board_info.irq = adap->client_irq;
- adap->client = i2c_new_device(&adap->adapter, &board_info);
- if (!adap->client) {
- ret = -ENOMEM;
- goto del_adapter;
+ /*
+ * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
+ * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
+ * USB Type-C controller connected to another i2c bus. In this setup
+ * the max17047 and fusb302 devices are enumerated through an INT33FE
+ * ACPI device. If this device is present register an i2c-client for
+ * the TI bq24292i charger.
+ */
+ if (acpi_dev_present("INT33FE", NULL, -1)) {
+ board_info.irq = adap->client_irq;
+ adap->client = i2c_new_device(&adap->adapter, &board_info);
+ if (!adap->client) {
+ ret = -ENOMEM;
+ goto del_adapter;
+ }
}
platform_set_drvdata(pdev, adap);
@@ -335,7 +371,8 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
{
struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
- i2c_unregister_device(adap->client);
+ if (adap->client)
+ i2c_unregister_device(adap->client);
i2c_del_adapter(&adap->adapter);
irq_domain_remove(adap->irq_domain);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54a47b40546f..f96830ffd9f1 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1021,7 +1021,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
}
dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
- rinfo->sda_gpio, rinfo->scl_gpio);
+ rinfo->scl_gpio, rinfo->sda_gpio);
rinfo->prepare_recovery = i2c_imx_prepare_recovery;
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
@@ -1100,7 +1100,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
}
/* Request IRQ */
- ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
+ ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
pdev->name, i2c_imx);
if (ret) {
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 22ffcb73c185..b51adffa4841 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -340,12 +340,15 @@ static int ismt_process_desc(const struct ismt_desc *desc,
data->word = dma_buffer[0] | (dma_buffer[1] << 8);
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
if (desc->rxbytes != dma_buffer[0] + 1)
return -EMSGSIZE;
memcpy(data->block, dma_buffer, desc->rxbytes);
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ memcpy(&data->block[1], dma_buffer, desc->rxbytes);
+ data->block[0] = desc->rxbytes;
+ break;
}
return 0;
}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 1ebb5e947e0b..23c2ea2baedc 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -360,6 +360,7 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
unsigned long fclk_rate = 12000000;
unsigned long internal_clk = 0;
struct clk *fclk;
+ int error;
if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
/*
@@ -378,6 +379,13 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
* do this bit unconditionally.
*/
fclk = clk_get(omap->dev, "fck");
+ if (IS_ERR(fclk)) {
+ error = PTR_ERR(fclk);
+ dev_err(omap->dev, "could not get fck: %i\n", error);
+
+ return error;
+ }
+
fclk_rate = clk_get_rate(fclk);
clk_put(fclk);
@@ -410,6 +418,12 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
else
internal_clk = 4000;
fclk = clk_get(omap->dev, "fck");
+ if (IS_ERR(fclk)) {
+ error = PTR_ERR(fclk);
+ dev_err(omap->dev, "could not get fck: %i\n", error);
+
+ return error;
+ }
fclk_rate = clk_get_rate(fclk) / 1000;
clk_put(fclk);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 0ecdb47a23ab..174579d32e5f 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -85,6 +85,9 @@
/* SB800 constants */
#define SB800_PIIX4_SMB_IDX 0xcd6
+#define KERNCZ_IMC_IDX 0x3e
+#define KERNCZ_IMC_DATA 0x3f
+
/*
* SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
* or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
@@ -94,6 +97,12 @@
#define SB800_PIIX4_PORT_IDX_ALT 0x2e
#define SB800_PIIX4_PORT_IDX_SEL 0x2f
#define SB800_PIIX4_PORT_IDX_MASK 0x06
+#define SB800_PIIX4_PORT_IDX_SHIFT 1
+
+/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
+#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02
+#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18
+#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3
/* insmod parameters */
@@ -149,6 +158,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
*/
static DEFINE_MUTEX(piix4_mutex_sb800);
static u8 piix4_port_sel_sb800;
+static u8 piix4_port_mask_sb800;
+static u8 piix4_port_shift_sb800;
static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
" port 0", " port 2", " port 3", " port 4"
};
@@ -159,6 +170,7 @@ struct i2c_piix4_adapdata {
/* SB800 */
bool sb800_main;
+ bool notify_imc;
u8 port; /* Port number, shifted */
};
@@ -347,7 +359,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
/* Find which register is used for port selection */
if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
- piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+ switch (PIIX4_dev->device) {
+ case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS:
+ piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
+ break;
+ case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS:
+ default:
+ piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
+ break;
+ }
} else {
mutex_lock(&piix4_mutex_sb800);
outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@@ -355,6 +379,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
piix4_port_sel_sb800 = (port_sel & 0x01) ?
SB800_PIIX4_PORT_IDX_ALT :
SB800_PIIX4_PORT_IDX;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
mutex_unlock(&piix4_mutex_sb800);
}
@@ -572,6 +598,67 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
return 0;
}
+static uint8_t piix4_imc_read(uint8_t idx)
+{
+ outb_p(idx, KERNCZ_IMC_IDX);
+ return inb_p(KERNCZ_IMC_DATA);
+}
+
+static void piix4_imc_write(uint8_t idx, uint8_t value)
+{
+ outb_p(idx, KERNCZ_IMC_IDX);
+ outb_p(value, KERNCZ_IMC_DATA);
+}
+
+static int piix4_imc_sleep(void)
+{
+ int timeout = MAX_TIMEOUT;
+
+ if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+ return -EBUSY;
+
+ /* clear response register */
+ piix4_imc_write(0x82, 0x00);
+ /* request ownership flag */
+ piix4_imc_write(0x83, 0xB4);
+ /* kick off IMC Mailbox command 96 */
+ piix4_imc_write(0x80, 0x96);
+
+ while (timeout--) {
+ if (piix4_imc_read(0x82) == 0xfa) {
+ release_region(KERNCZ_IMC_IDX, 2);
+ return 0;
+ }
+ usleep_range(1000, 2000);
+ }
+
+ release_region(KERNCZ_IMC_IDX, 2);
+ return -ETIMEDOUT;
+}
+
+static void piix4_imc_wakeup(void)
+{
+ int timeout = MAX_TIMEOUT;
+
+ if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+ return;
+
+ /* clear response register */
+ piix4_imc_write(0x82, 0x00);
+ /* release ownership flag */
+ piix4_imc_write(0x83, 0xB5);
+ /* kick off IMC Mailbox command 96 */
+ piix4_imc_write(0x80, 0x96);
+
+ while (timeout--) {
+ if (piix4_imc_read(0x82) == 0xfa)
+ break;
+ usleep_range(1000, 2000);
+ }
+
+ release_region(KERNCZ_IMC_IDX, 2);
+}
+
/*
* Handles access to multiple SMBus ports on the SB800.
* The port is selected by bits 2:1 of the smb_en register (0x2c).
@@ -612,12 +699,47 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
return -EBUSY;
}
+ /*
+ * Notify the IMC (Integrated Micro Controller) if required.
+ * Among other responsibilities, the IMC is in charge of monitoring
+ * the System fans and temperature sensors, and act accordingly.
+ * All this is done through SMBus and can/will collide
+ * with our transactions if they are long (BLOCK_DATA).
+ * Therefore we need to request the ownership flag during those
+ * transactions.
+ */
+ if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) {
+ int ret;
+
+ ret = piix4_imc_sleep();
+ switch (ret) {
+ case -EBUSY:
+ dev_warn(&adap->dev,
+ "IMC base address index region 0x%x already in use.\n",
+ KERNCZ_IMC_IDX);
+ break;
+ case -ETIMEDOUT:
+ dev_warn(&adap->dev,
+ "Failed to communicate with the IMC.\n");
+ break;
+ default:
+ break;
+ }
+
+ /* If IMC communication fails do not retry */
+ if (ret) {
+ dev_warn(&adap->dev,
+ "Continuing without IMC notification.\n");
+ adapdata->notify_imc = false;
+ }
+ }
+
outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
port = adapdata->port;
- if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port)
- outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port,
+ if ((smba_en_lo & piix4_port_mask_sb800) != port)
+ outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
SB800_PIIX4_SMB_IDX + 1);
retval = piix4_access(adap, addr, flags, read_write,
@@ -628,6 +750,9 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
/* Release the semaphore */
outb_p(smbslvcnt | 0x20, SMBSLVCNT);
+ if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc)
+ piix4_imc_wakeup();
+
mutex_unlock(&piix4_mutex_sb800);
return retval;
@@ -679,7 +804,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
- bool sb800_main, u8 port,
+ bool sb800_main, u8 port, bool notify_imc,
const char *name, struct i2c_adapter **padap)
{
struct i2c_adapter *adap;
@@ -706,7 +831,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
adapdata->smba = smba;
adapdata->sb800_main = sb800_main;
- adapdata->port = port << 1;
+ adapdata->port = port << piix4_port_shift_sb800;
+ adapdata->notify_imc = notify_imc;
/* set up the sysfs linkage to our parent device */
adap->dev.parent = &dev->dev;
@@ -728,14 +854,15 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
return 0;
}
-static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)
+static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
+ bool notify_imc)
{
struct i2c_piix4_adapdata *adapdata;
int port;
int retval;
for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
- retval = piix4_add_adapter(dev, smba, true, port,
+ retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
piix4_main_port_names_sb800[port],
&piix4_main_adapters[port]);
if (retval < 0)
@@ -769,6 +896,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision >= 0x40) ||
dev->vendor == PCI_VENDOR_ID_AMD) {
+ bool notify_imc = false;
is_sb800 = true;
if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {
@@ -778,6 +906,20 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -EBUSY;
}
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
+ u8 imc;
+
+ /*
+ * Detect if IMC is active or not, this method is
+ * described on coreboot's AMD IMC notes
+ */
+ pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3),
+ 0x40, &imc);
+ if (imc & 0x80)
+ notify_imc = true;
+ }
+
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id, 0);
if (retval < 0) {
@@ -789,7 +931,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
* Try to register multiplexed main SMBus adapter,
* give up if we can't
*/
- retval = piix4_add_adapters_sb800(dev, retval);
+ retval = piix4_add_adapters_sb800(dev, retval, notify_imc);
if (retval < 0) {
release_region(SB800_PIIX4_SMB_IDX, 2);
return retval;
@@ -800,7 +942,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
/* Try to register main SMBus adapter, give up if we can't */
- retval = piix4_add_adapter(dev, retval, false, 0, "",
+ retval = piix4_add_adapter(dev, retval, false, 0, false, "",
&piix4_main_adapters[0]);
if (retval < 0)
return retval;
@@ -827,7 +969,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (retval > 0) {
/* Try to add the aux adapter if it exists,
* piix4_add_adapter will clean up if this fails */
- piix4_add_adapter(dev, retval, false, 0,
+ piix4_add_adapter(dev, retval, false, 0, false,
is_sb800 ? piix4_aux_port_name_sb800 : "",
&piix4_aux_adapter);
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-31 00:29:46 +0300