diff options
Diffstat (limited to 'drivers/hwmon/lm92.c')
| -rw-r--r-- | drivers/hwmon/lm92.c | 111 |
1 files changed, 63 insertions, 48 deletions
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 8fcbd4d422c5..fdc691a4028f 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -49,8 +49,10 @@ #include <linux/err.h> #include <linux/mutex.h> -/* The LM92 and MAX6635 have 2 two-state pins for address selection, - resulting in 4 possible addresses. */ +/* + * The LM92 and MAX6635 have 2 two-state pins for address selection, + * resulting in 4 possible addresses. + */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; @@ -63,11 +65,13 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, #define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ #define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ -/* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, - left-justified in 16-bit registers. No rounding is done, with such - a resolution it's just not worth it. Note that the MAX6635 doesn't - make use of the 4 lower bits for limits (i.e. effective resolution - for limits is 1 degree Celsius). */ +/* + * The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, + * left-justified in 16-bit registers. No rounding is done, with such + * a resolution it's just not worth it. Note that the MAX6635 doesn't + * make use of the 4 lower bits for limits (i.e. effective resolution + * for limits is 1 degree Celsius). + */ static inline int TEMP_FROM_REG(s16 reg) { return reg / 8 * 625 / 10; @@ -138,7 +142,8 @@ static struct lm92_data *lm92_update_device(struct device *dev) } #define show_temp(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##value(struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct lm92_data *data = lm92_update_device(dev); \ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ @@ -149,13 +154,17 @@ show_temp(temp1_min); show_temp(temp1_max); #define set_temp(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ +static ssize_t set_##value(struct device *dev, struct device_attribute *attr, \ + const char *buf, \ size_t count) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct lm92_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ + long val; \ + int err = kstrtol(buf, 10, &val); \ + if (err) \ + return err; \ +\ mutex_lock(&data->update_lock); \ data->value = TEMP_TO_REG(val); \ i2c_smbus_write_word_swapped(client, reg, data->value); \ @@ -166,31 +175,40 @@ set_temp(temp1_crit, LM92_REG_TEMP_CRIT); set_temp(temp1_min, LM92_REG_TEMP_LOW); set_temp(temp1_max, LM92_REG_TEMP_HIGH); -static ssize_t show_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp1_crit_hyst(struct device *dev, + struct device_attribute *attr, char *buf) { struct lm92_data *data = lm92_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit) - TEMP_FROM_REG(data->temp1_hyst)); } -static ssize_t show_temp1_max_hyst(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp1_max_hyst(struct device *dev, + struct device_attribute *attr, char *buf) { struct lm92_data *data = lm92_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max) - TEMP_FROM_REG(data->temp1_hyst)); } -static ssize_t show_temp1_min_hyst(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp1_min_hyst(struct device *dev, + struct device_attribute *attr, char *buf) { struct lm92_data *data = lm92_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min) + TEMP_FROM_REG(data->temp1_hyst)); } -static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t set_temp1_crit_hyst(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm92_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; mutex_lock(&data->update_lock); data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val; @@ -200,7 +218,8 @@ static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute * return count; } -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm92_data *data = lm92_update_device(dev); return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input)); @@ -246,26 +265,30 @@ static void lm92_init_client(struct i2c_client *client) config & 0xFE); } -/* The MAX6635 has no identification register, so we have to use tricks - to identify it reliably. This is somewhat slow. - Note that we do NOT rely on the 2 MSB of the configuration register - always reading 0, as suggested by the datasheet, because it was once - reported not to be true. */ +/* + * The MAX6635 has no identification register, so we have to use tricks + * to identify it reliably. This is somewhat slow. + * Note that we do NOT rely on the 2 MSB of the configuration register + * always reading 0, as suggested by the datasheet, because it was once + * reported not to be true. + */ static int max6635_check(struct i2c_client *client) { u16 temp_low, temp_high, temp_hyst, temp_crit; u8 conf; int i; - /* No manufacturer ID register, so a read from this address will - always return the last read value. */ + /* + * No manufacturer ID register, so a read from this address will + * always return the last read value. + */ temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW); if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low) return 0; temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH); if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high) return 0; - + /* Limits are stored as integer values (signed, 9-bit). */ if ((temp_low & 0x7f00) || (temp_high & 0x7f00)) return 0; @@ -274,22 +297,24 @@ static int max6635_check(struct i2c_client *client) if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00)) return 0; - /* Registers addresses were found to cycle over 16-byte boundaries. - We don't test all registers with all offsets so as to save some - reads and time, but this should still be sufficient to dismiss - non-MAX6635 chips. */ + /* + * Registers addresses were found to cycle over 16-byte boundaries. + * We don't test all registers with all offsets so as to save some + * reads and time, but this should still be sufficient to dismiss + * non-MAX6635 chips. + */ conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); - for (i=16; i<96; i*=2) { + for (i = 16; i < 96; i *= 2) { if (temp_hyst != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HYST + i - 16) + LM92_REG_TEMP_HYST + i - 16) || temp_crit != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_CRIT + i) + LM92_REG_TEMP_CRIT + i) || temp_low != i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW + i + 16) || temp_high != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HIGH + i + 32) + LM92_REG_TEMP_HIGH + i + 32) || conf != i2c_smbus_read_byte_data(client, - LM92_REG_CONFIG + i)) + LM92_REG_CONFIG + i)) return 0; } @@ -362,7 +387,8 @@ static int lm92_probe(struct i2c_client *new_client, lm92_init_client(new_client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group))) + err = sysfs_create_group(&new_client->dev.kobj, &lm92_group); + if (err) goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); @@ -416,19 +442,8 @@ static struct i2c_driver lm92_driver = { .address_list = normal_i2c, }; -static int __init sensors_lm92_init(void) -{ - return i2c_add_driver(&lm92_driver); -} - -static void __exit sensors_lm92_exit(void) -{ - i2c_del_driver(&lm92_driver); -} +module_i2c_driver(lm92_driver); MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); MODULE_DESCRIPTION("LM92/MAX6635 driver"); MODULE_LICENSE("GPL"); - -module_init(sensors_lm92_init); -module_exit(sensors_lm92_exit); |